|
|
【Android】
rk3399 V.android8.1 添加dsi1后进入recovery
发表于 2021-3-9 10:51:29
浏览：2633
|
回复：2
打印
只看该作者
[复制链接]
楼主
----------- 添加dsi1配置后，系统启动流程改变-----------
# emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_point_2 is (null)
read cmdline
tered new interface driver usb-storage
[ 0.796907] usbcore: rI:Boot command: boot-recovery
[ 1.730855] init: Parsing file /init.rc...
[ 1.730967] init: Added '/init.bootmode.emmc.rc' to import list
[ 1.730998] init: Added '/init.recovery.rk30board.rc' to import list
[ 1.731024] init: Added '/init.rk30board.usb.rc' to import list
[ 1.731044] init: Added '/init.usb.configfs.rc' to import list
[ 1.731398] init: Parsing file /init.bootmode.emmc.rc...
[ 1.731442] init: Unable to open '/init.bootmode.emmc.rc': No such file or directory
[ 1.731467] init: /init.rc: 1: Could not import file '/init.bootmode.emmc.rc': No such file or directory
[ 1.731500] init: Parsing file /init.recovery.rk30board.rc...
[ 1.731540] init: Unable to open '/init.recovery.rk30board.rc': No such file or directory
[ 1.731563] init: /init.rc: 2: Could not import file '/init.recovery.rk30board.rc': No such file or directory
[ 1.731593] init: Parsing file /init.rk30board.usb.rc...
[ 1.731917] init: Parsing file /init.usb.configfs.rc...
[ 1.732497] init: Parsing file /system/etc/init...
[ 1.732544] init: Unable to open '/system/etc/init': No such file or directory
[ 1.732577] init: Parsing file /vendor/etc/init...
[ 1.732616] init: Unable to open '/vendor/etc/init': No such file or directory
[ 1.732647] init: Parsing file /odm/etc/init...
[ 1.732684] init: Unable to open '/odm/etc/init': No such file or directory
[ 1.732747] init: processing action (early-init) from (/init.rc:6)
[ 1.732854] init: starting service 'ueventd'...
[ 1.733992] init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
[ 1.736728] ueventd: ueventd started!
[ 1.984945] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) returned 0 took 250ms.
[ 1.985037] init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
----------- 上面异常流程出现多个rc文件找不到，启动进入recovery 模式 -----------
---------- -一般流程如下 -----------
[ 1.254430] init: Parsing file /init.rc...
[ 1.254830] init: Added '/init.environ.rc' to import list
[ 1.254877] init: Added '/init.usb.rc' to import list
[ 1.254930] init: Added '/init.rk30board.rc' to import list
[ 1.254959] init: Added '/vendor/etc/init/hw/init.rk30board.rc' to import list
[ 1.254981] init: Added '/init.usb.configfs.rc' to import list
[ 1.255007] init: Added '/init.zygote64_32.rc' to import list
[ 1.256794] init: Parsing file /init.environ.rc...
[ 1.256969] init: Parsing file /init.usb.rc...
[ 1.257544] init: Parsing file /init.rk30board.rc...
[ 1.257785] init: Added 'init.rk30board.bootmode.emmc.rc' to import list
[ 1.257822] init: Added 'init.rockchip.rc' to import list
[ 1.257863] init: Added 'init.connectivity.rc' to import list
[ 1.257885] init: Added 'init.box.samba.rc' to import list
[ 1.257912] init: Added 'init.rk3399.rc' to import list
[ 1.257940] init: Added 'init.tablet.rc' to import list
[ 1.257961] init: Added 'init.car.rc' to import list
[ 1.257981] init: Added 'init.optee.rc' to import list
[ 1.258937] init: Parsing file init.rk30board.bootmode.emmc.rc...
[ 1.259025] init: Parsing file init.rockchip.rc...
[ 1.259140] init: Added 'init.rk30board.usb.rc' to import list
[ 1.259170] init: Added 'init.rk30board.environment.rc' to import list
[ 1.259211] init: Added '/init.debug.rc' to import list
[ 1.259690] init: Parsing file init.rk30board.usb.rc...
[ 1.260063] init: Parsing file init.rk30board.environment.rc...
[ 1.260164] init: Parsing file /init.debug.rc...
[ 1.260206] init: Unable to open '/init.debug.rc': No such file or directory
[ 1.260239] init: /init.rc: 3: Could not import file '/init.debug.rc': No such file or directory
[ 1.260287] init: Parsing file init.connectivity.rc...
[ 1.260583] init: Parsing file init.box.samba.rc...
[ 1.260645] init: Unable to open 'init.box.samba.rc': No such file or directory
[ 1.260689] init: /init.rc: 4: Could not import file 'init.box.samba.rc': No such file or directory
[ 1.260718] init: Parsing file init.rk3399.rc...
[ 1.260887] init: init.rk3399.rc: 25: invalid keyword 'ioprio'
[ 1.261090] init: Parsing file init.tablet.rc...
[ 1.261145] init: Unable to open 'init.tablet.rc': No such file or directory
[ 1.261171] init: /init.rc: 6: Could not import file 'init.tablet.rc': No such file or directory
[ 1.261200] init: Parsing file init.car.rc...
[ 1.261234] init: Unable to open 'init.car.rc': No such file or directory
[ 1.261259] init: /init.rc: 7: Could not import file 'init.car.rc': No such file or directory
[ 1.261305] init: Parsing file init.optee.rc...
[ 1.261340] init: Unable to open 'init.optee.rc': No such file or directory
[ 1.261365] init: /init.rc: 8: Could not import file 'init.optee.rc': No such file or directory
[ 1.262550] init: Parsing file /vendor/etc/init/hw/init.rk30board.rc...
[ 1.262625] init: Unable to open '/vendor/etc/init/hw/init.rk30board.rc': No such file or directory
[ 1.262672] init: /init.rc: 10: Could not import file '/vendor/etc/init/hw/init.rk30board.rc': No such file or directory
[ 1.262704] init: Parsing file /init.usb.configfs.rc...
[ 1.263465] init: Parsing file /init.zygote64_32.rc...
----------- 异常完整log如 -----------
minicom: cannot open /dev/ttyUSB0: No such file or directory
Welcome to minicom 2.7.1
OPTIONS: I18n
Compiled on Aug 13 2017, 15:25:34.
Port /dev/ttyUSB0, 09:50:17
[ 0.186989] console [ttyFIQ0] enabled
[ 0.194678] bootconsole [uart0] disabled
[ 0.194678] bootconsole [uart0] disabled
[ 0.199180] Registered fiq debugger ttyFIQ0
[ 0.230863] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0)
[ 0.230916] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0)
[ 0.231147] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
[ 0.231465] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
[ 0.231755] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-hub-en-regulator[0]' - status (0)
[ 0.232056] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-sd[0]' - status (0)
[ 0.232274] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0-sys[0]'
[ 0.232549] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-wifi[0]' - status (0)
[ 0.232848] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-pcie[0]' - status (0)
[ 0.233057] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
[ 0.233524] iommu: Adding device ff650000.vpu_service to group 0
[ 0.233600] iommu: Adding device ff660000.rkvdec to group 1
[ 0.233660] iommu: Adding device ff670000.iep to group 2
[ 0.233747] iommu: Adding device ff8f0000.vop to group 3
[ 0.233816] iommu: Adding device ff900000.vop to group 4
[ 0.233921] iommu: Adding device ff910000.isp to group 5
[ 0.233988] iommu: Adding device ff920000.isp to group 6
[ 0.234670] rk_iommu ff670800.iommu: can't get aclk
[ 0.234689] rk_iommu ff670800.iommu: can't get hclk
[ 0.235537] SCSI subsystem initialized
[ 0.235733] libata version 3.00 loaded.
[ 0.235902] usbcore: registered new interface driver usbfs
[ 0.235944] usbcore: registered new interface driver hub
[ 0.236026] usbcore: registered new device driver usb
[ 0.236365] media: Linux media interface: v0.10
[ 0.236400] Linux video capture interface: v2.00
[ 0.236586] pps_core: LinuxPPS API ver. 1 registered
[ 0.236596] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.236614] PTP clock support registered
[ 0.238105] Advanced Linux Sound Architecture Driver Initialized.
[ 0.238601] Bluetooth: Core ver 2.21
[ 0.238632] NET: Registered protocol family 31
[ 0.238640] Bluetooth: HCI device and connection manager initialized
[ 0.238653] Bluetooth: HCI socket layer initialized
[ 0.238665] Bluetooth: L2CAP socket layer initialized
[ 0.238694] Bluetooth: SCO socket layer initialized
[ 0.239377] rockchip-cpuinfo cpuinfo: Serial : 4da7e0c159fb2607
[ 0.239873] clocksource: Switched to clocksource arch_sys_counter
[ 0.282084] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.282303] NET: Registered protocol family 2
[ 0.282717] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.282940] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.283191] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.283310] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.283355] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.283542] NET: Registered protocol family 1
[ 0.283725] PCI: CLS 0 bytes, default 64
[ 0.284378] Trying to unpack rootfs image as initramfs...
[ 0.659265] Freeing initrd memory: 8596K
[ 0.659829] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.659946] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.662747] audit: initializing netlink subsys (disabled)
[ 0.662812] audit: type=2000 audit(0.656:1): initialized
[ ` 0.667974] VFS: Disk quotas dquot_6.6.0
[ 0.668099] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.669104] Registering sdcardfs 0.1
[ 0.669645] fuse init (API version 7.23)
[ 0.670295] SELinux: Registering netfilter hooks
[ 0.670716]
[ 0.670716] TEE Core Framework initialization (ver 1:0.1)
[ 0.670743] TEE armv7 Driver initialization
[ 0.671100] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[ 0.671116] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[ 0.671287] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[ 0.675134] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.675156] io scheduler noop registered
[ 0.675317] io scheduler cfq registered (default)
[ 0.680281] iep: failed to find iep power down clock source.
[ 0.680647] IEP Power ON
[ 0.680805] IEP Power OFF
[ 0.680881] IEP Driver loaded succesfully
[ 0.680984] Module initialized.
[ 0.681249] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 0.681453] rk-vcodec ff650000.vpu_service: probe device
[ 0.681497] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc0f1f0dc10
[ 0.681627] rk-vcodec ff650000.vpu_service: allocator is drm
[ 0.681683] rk-vcodec ff650000.vpu_service: checking hw id 0
[ 0.682169] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 0.682184] rk-vcodec ff650000.vpu_service: init success
[ 0.682420] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 0.682814] rk-vcodec ff660000.rkvdec: probe device
[ 0.682855] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc0f1f0e410
[ 0.682989] rk-vcodec ff660000.rkvdec: allocator is drm
[ 0.683048] rk-vcodec ff660000.rkvdec: checking hw id 6876
[ 0.683438] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 0.683452] rk-vcodec ff660000.rkvdec: init success
[ 0.685156] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.685176] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.686551] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.686571] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.687645] pwm-regulator vdd-log: GPIO lookup for consumer enable
[ 0.687662] pwm-regulator vdd-log: using device tree for GPIO lookup
[ 0.687673] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
[ 0.687683] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
[ 0.687702] pwm-regulator vdd-log: using lookup tables for GPIO lookup
[ 0.687712] pwm-regulator vdd-log: lookup for GPIO enable failed
[ 0.688320] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.690078] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.690386] rockchip-pinctrl pinctrl: pin gpio4-19 already requested by fiq-debugger; cannot claim for ff1a0000.serial
[ 0.690403] rockchip-pinctrl pinctrl: pin-147 (ff1a0000.serial) status -22
[ 0.690415] rockchip-pinctrl pinctrl: could not request pin 147 (gpio4-19) from group uart2c-xfer on device rockchip-pinctrl
[ 0.690425] dw-apb-uart ff1a0000.serial: Error applying setting, reverse things back
[ 0.690699] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 39, base_baud = 1500000) is a 16550A
[ 0.691129] [drm] Initialized drm 1.1.0 20060810
[ 0.693942] BUG: recent printk recursion!
[ 0.694195]
[ 0.696675] [drm] Rockchip DRM driver version: v1.0.1
[ 0.698572]
[ 0.698606]
[ 0.698670] panel-simple-dsi ff968000.dsi.0: panel_simple_dsi_probe delete panel_simple_get_cmds
[ 0.698679] panel-simple-dsi ff968000.dsi.0: mipi_dsi_attach
[ 0.698688]
[ 0.699099] Unable to detect cache hierarchy for CPU 0
[ 0.707150] brd: module loaded
[ 0.712092] loop: module loaded
[ 0.712604] zram: Added device: zram0
[ 0.713494] SCSI Media Changer driver v0.25
[ 0.714801] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[ 0.714820] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[ 0.715337] m25p80 spi0.0: w25q128 (16384 Kbytes)
[ 0.716298] register spi return v = :0
[ 0.716344] register firefly_spi_init spi return v = :0
[ 0.716400] tun: Universal TUN/TAP device driver, 1.6
[ 0.716407] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.717398] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.717419] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 0.717430] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
[ 0.717454] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 0.717619] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 0.717631] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.722646] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.722769] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 0.722778] Ring mode enabled
[ 0.722786] DMA HW capability register supported
[ 0.722792] Normal descriptors
[ 0.722802] RX Checksum Offload Engine supported (type 2)
[ 0.722809] TX Checksum insertion supported
[ 0.722815] Wake-Up On Lan supported
[ 0.722853] Enable RX Mitigation via HW Watchdog Timer
[ 0.722952] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
[ 0.789224] libphy: stmmac: probed
[ 0.789259] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 0.789269] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 0.790184] PPP generic driver version 2.4.2
[ 0.790395] PPP BSD Compression module registered
[ 0.790430] PPP Deflate Compression module registered
[ 0.790461] PPP MPPE Compression module registered
[ 0.790481] NET: Registered protocol family 24
[ 0.790525] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 0.790533] CSLIP: code copyright 1989 Regents of the University of California.
[ 0.790550] Rockchip WiFi SYS interface (V1.00) ...
[ 0.790635] usbcore: registered new interface driver catc
[ 0.790712] usbcore: registered new interface driver kaweth
[ 0.790727] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.790763] usbcore: registered new interface driver pegasus
[ 0.790804] usbcore: registered new interface driver rtl8150
[ 0.790847] usbcore: registered new interface driver r8152
[ 0.790882] hso: drivers/net/usb/hso.c: Option Wireless
[ 0.790933] usbcore: registered new interface driver hso
[ 0.790983] usbcore: registered new interface driver asix
[ 0.791026] usbcore: registered new interface driver ax88179_178a
[ 0.791069] usbcore: registered new interface driver cdc_ether
[ 0.791130] usbcore: registered new interface driver cdc_eem
[ 0.791170] usbcore: registered new interface driver dm9601
[ 0.791219] usbcore: registered new interface driver smsc75xx
[ 0.791266] usbcore: registered new interface driver smsc95xx
[ 0.791329] usbcore: registered new interface driver gl620a
[ 0.791370] usbcore: registered new interface driver net1080
[ 0.791410] usbcore: registered new interface driver plusb
[ 0.791450] usbcore: registered new interface driver rndis_host
[ 0.791517] usbcore: registered new interface driver cdc_subset
[ 0.791557] usbcore: registered new interface driver zaurus
[ 0.791602] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 0.791659] usbcore: registered new interface driver int51x1
[ 0.791719] usbcore: registered new interface driver kalmia
[ 0.791759] usbcore: registered new interface driver ipheth
[ 0.791802] usbcore: registered new interface driver sierra_net
[ 0.791846] usbcore: registered new interface driver cx82310_eth
[ 0.791895] usbcore: registered new interface driver cdc_ncm
[ 0.791955] usbcore: registered new interface driver qmi_wwan
[ 0.791999] usbcore: registered new interface driver cdc_mbim
[ 0.793180] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[ 0.794043] rockchip-dwc3 usb@fe900000: failed to get drvdata dwc3
[ 0.794958] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.794998] ehci-pci: EHCI PCI platform driver
[ 0.795061] ehci-platform: EHCI generic platform driver
[ 0.795695] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.795751] ohci-platform: OHCI generic platform driver
[ 0.796629] usbcore: registered new interface driver cdc_acm
[ 0.796660] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.796717] usbcore: registered new interface driver usblp
[ 0.796779] usbcore: registered new interface driver cdc_wdm
[ 0.796819] usbcore: registered new interface drStarting recovery (pid 195) on Fri Jan 18 08:50:04 2013
recovery filesystem table
=========================
0 /system ext4ver /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2 /mnt/internal_sd vfat /dev/block/platform/fe330000.sdhci/by-n ame/user 0
3 /mnt/external_sd vfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/platform/fe330000.sdhci/by-name/systema 0
vendor 0dor ext4 /dev/block/platsform/fe330000.sdhci/by-name/
6 /oem ext4 /dev
/block/platform/fe33000[0.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform/fe330000.sdhc i/by-name/cache 0
8 /me tadata ext4 /dev/block/pla tform/fe330000.sdhci/by-name/metadata 0
9 /data f2fs /dev/block/platform/fe330000.0sdhci/by-name/us.erdata 0
9 10 /cust e7t4 /dev/block/platform/fe330000.sdhci/by-name/cust 0
11 /custom ext4 /dev/block/platform/6fe330000.sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.sdhci/by-name/radical_8update 0
13 /misc e7mmc /dev/block/p1latform/fe330000.sdhci/by-name/misc ]0
14 /uboot emmc /dev/block/platform/fe330000.sdhci/buy-name/uboot 0
15 /charge emmc /dev/sblock/platform/fe330000.sdhci/bby-cname/charge 0
16 /resource emmc /dev/block/oplatform/fe330000.sdhci/by-name/resource 0
r7 /parameter emmc /dev/block/platform/fe330000e.sdhci/by-name/parameter 0
18 /boot emmc: /dev/block/platform/fe330000.sdhci/by-name /bootr 0
19 /recovery emmc /dev/block/platform/fee330000.sdhci/by-name/recovery 0
20 /backgupi emmc /dev/block/plastform/fe330000.sdhci/by-name/backup 0
21 /trust emmc /dev/block/platform/fe330000.sdhci/by-name/trust 0
22 /baseparamer emmc /dev/block/platform/fe330000.sdhci/by-name/baseparamer 0
23 /frp emmc /dev/block/platform/fe330000.sdhci/by-name/frp 0
24 /tmp ramdisk ramdisk 0
# emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_point_2 is (null)
read cmdline
tered new interface driver usb-storage
[ 0.796907] usbcore: rI:Boot command: boot-recovery
I:Got 2 arguments from boot message
egistered new interface driver ums-alauda
[ 0.796966] usbcore: registered new interface drivloecale is [en_US]
stage is []
reason is [(null)]
r W:Fuailed to read max brightness: No such file or directory
I:Screensmaver disabled
s-cypress
[ 0.797001] usbcore: registered new interface driver ums-datafab
[ 0.797036] usbcore: registered new interface driver ums_eneub6250
[ 0.797071] usbcore: registered new interface driver ums-freecom
[ 0.797107] usbcore: registered new interface driver ums-isd200
[ 0.797163] usbcore: registered new interface driver ums-jumpshot
[ 0.797198] usbcore: registered new interface driver ums-karma
[ 0.797237] usbcore: registered new interface driver ums-onetouch
[ 0.797273] usbcore: registered new interface driver ums-sddr09
[ 0.797307] usbcore: registered new interface driver ums-sddr55
[ 0.797361] usbcore: registered new interface driver ums-usbat
[ 0.797433] usbcore: registered new interface driver usbserial
[ 0.797466] usbcore: registered new interface driver usbserial_generic
[ 0.797497] usbserial: USB Serial support registered for generic
[ 0.797559] usbcore: registered new interface driver option
[ 0.797586] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.797626] usbcore: registered new interface driver trancevibrator
[ 0.797638] usb20_otg: version 3.10a 21-DEC-2012
[ 0.797801] usb20_host: version 3.10a 21-DEC-2012
[ 0.798349] usbcore: registered new interface driver xpad
[ 0.798398] usbcore: registered new interface driver usb_acecad
[ 0.798442] usbcore: registered new interface driver aiptek
[ 0.798483] usbcore: registered new interface driver gtco
[ 0.798526] usbcore: registered new interface driver hanwang
[ 0.798567] usbcore: registered new interface driver kbtab
[ 0.798578] ==gsl_ts_init==
[ 0.798620] ret=0
[ 0.799038] .. rk pwm remotectl v1.1 init
[ 0.799268] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[ 0.799680] sensor_register_slave:kxtj9,id=11
[ 0.799700] sensor_register_slave:mma8452,id=17
[ 0.799712] sensor_register_slave:lis3dh,id=7
[ 0.799723] sensor_register_slave:mma7660,id=18
[ 0.799735] sensor_register_slave:lsm303d,id=22
[ 0.799746] sensor_register_slave:gs_mc3230,id=23
[ 0.799753] [Gsensor] gsensor_init
[ 0.799764] sensor_register_slave:mpu6880_acc,id=24
[ 0.799775] sensor_register_slave:mpu6500_acc,id=25
[ 0.799787] sensor_register_slave:lsm330_acc,id=26
[ 0.799797] sensor_register_slave:bma2xx_acc,id=27
[ 0.799809] sensor_register_slave:akm8975,id=30
[ 0.799820] sensor_register_slave:akm8963,id=31
[ 0.799832] sensor_register_slave:l3g4200d,id=45
[ 0.799843] sensor_register_slave:l3g20d,id=46
[ 0.799890] sensor_register_slave:ewtsa,id=47
[ 0.799902] sensor_register_slave:lsm330_gyro,id=51
[ 0.799914] sensor_register_slave:cm3217,id=53
[ 0.799925] sensor_register_slave:cm3218,id=54
[ 0.799936] sensor_register_slave:ls_stk3410,id=62
[ 0.799947] sensor_register_slave:ps_stk3410,id=67
[ 0.800710] i2c /dev entries driver
[ 0.801537] fusb302 4-0022: GPIO lookup for consumer int-n
[ 0.801555] fusb302 4-0022: using device tree for GPIO lookup
[ 0.801588] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
[ 0.801618] fusb302 4-0022: GPIO lookup for consumer vbus-5v
[ 0.801631] fusb302 4-0022: using device tree for GPIO lookup
[ 0.801657] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
[ 0.801689] fusb302 4-0022: GPIO lookup for consumer vbus-other
[ 0.801697] fusb302 4-0022: using device tree for GPIO lookup
[ 0.801708] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.801718] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.801727] fusb302 4-0022: using lookup tables for GPIO lookup
[ 0.801736] fusb302 4-0022: lookup for GPIO vbus-other failed
[ 0.801746] fusb302 4-0022: GPIO lookup for consumer discharge
[ 0.801754] fusb302 4-0022: using device tree for GPIO lookup
[ 0.801763] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.801773] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.801781] fusb302 4-0022: using lookup tables for GPIO lookup
[ 0.801790] fusb302 4-0022: lookup for GPIO discharge failed
[ 0.801799] fusb302 4-0022: GPIO lookup for consumer charge-en
[ 0.801807] fusb302 4-0022: using device tree for GPIO lookup
[ 0.801832] of_get_named_gpiod_flags: can't parse 'charge-en-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.801842] of_get_named_gpiod_flags: can't parse 'charge-en-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
[ 0.801850] fusb302 4-0022: using lookup tables for GPIO lookup
[ 0.801859] fusb302 4-0022: lookup for GPIO charge-en failed
[ 0.801986] fusb302 4-0022: Can't get property of role, set role to default DRP
[ 0.810227] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[ 0.810268] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094fa000
[ 0.811227] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 0.811311] fan53555-reg: supplied by vcc5v0_sys
[ 0.813222] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 0.813283] fan53555-reg: supplied by vcc5v0_sys
[ 0.815269] rk808 0-001b: Pmic Chip id: 0x0
[ 0.818489] rk808 0-001b: GPIO lookup for consumer dvs
[ 0.818514] rk808 0-001b: using device tree for GPIO lookup
[ 0.818562] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
[ 0.818573] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
[ 0.818583] rk808 0-001b: using lookup tables for GPIO lookup
[ 0.818592] rk808 0-001b: lookup for GPIO dvs failed
[ 0.818602] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.818611] rk808 0-001b: GPIO lookup for consumer dvs
[ 0.818619] rk808 0-001b: using device tree for GPIO lookup
[ 0.818629] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
[ 0.818639] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
[ 0.818648] rk808 0-001b: using lookup tables for GPIO lookup
[ 0.818656] rk808 0-001b: lookup for GPIO dvs failed
[ 0.818665] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.818753] DCDC_REG1: supplied by vcc3v3_sys
[ 0.819491] DCDC_REG2: supplied by vcc3v3_sys
[ 0.820085] DCDC_REG3: supplied by vcc3v3_sys
[ 0.820375] DCDC_REG4: supplied by vcc3v3_sys
[ 0.820816] LDO_REG1: supplied by vcc3v3_sys
[ 0.821926] LDO_REG2: supplied by vcc3v3_sys
[ 0.822913] LDO_REG3: supplied by vcc3v3_sys
[ 0.823900] LDO_REG4: supplied by vcc3v3_sys
[ 0.824870] LDO_REG5: supplied by vcc3v3_sys
[ 0.825845] LDO_REG6: supplied by vcc3v3_sys
[ 0.826839] LDO_REG7: supplied by vcc3v3_sys
[ 0.827812] LDO_REG8: supplied by vcc3v3_sys
[ 0.828796] SWITCH_REG1: supplied by vcc3v3_sys
[ 0.829098] SWITCH_REG2: supplied by vcc3v3_sys
[ 0.832526] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 0.832980] of_get_named_gpiod_flags: parsed 'pmic,hold-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]' - status (0)
[ 0.833039] of_get_named_gpiod_flags: can't parse 'pmic,stby-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
[ 0.833050] rk808 0-001b: Can not read property pmic,stby-gpio
[ 0.833077] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094fc000
[ 0.833601] i2c i2c-1: of_i2c: modalias failure on /i2c@ff110000/rt5640@1c
[ 0.833730] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094fe000
[ 0.834257] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80097f8000
[ 0.834934] fusb302 7-0022: GPIO lookup for consumer int-n
[ 0.834968] fusb302 7-0022: using device tree for GPIO lookup
[ 0.834998] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff160000/fusb30x@22[0]' - status (0)
[ 0.835023] fusb302 7-0022: GPIO lookup for consumer vbus-5v
[ 0.835054] fusb302 7-0022: using device tree for GPIO lookup
[ 0.835064] of_get_named_gpiod_flags: can't parse 'vbus-5v-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.835075] of_get_named_gpiod_flags: can't parse 'vbus-5v-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.835083] fusb302 7-0022: using lookup tables for GPIO lookup
[ 0.835093] fusb302 7-0022: lookup for GPIO vbus-5v failed
[ 0.835103] fusb302 7-0022: GPIO lookup for consumer vbus-other
[ 0.835111] fusb302 7-0022: using device tree for GPIO lookup
[ 0.835120] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.835130] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.835139] fusb302 7-0022: using lookup tables for GPIO lookup
[ 0.835147] fusb302 7-0022: lookup for GPIO vbus-other failed
[ 0.835157] fusb302 7-0022: GPIO lookup for consumer discharge
[ 0.835165] fusb302 7-0022: using device tree for GPIO lookup
[ 0.835174] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.835183] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.835192] fusb302 7-0022: using lookup tables for GPIO lookup
[ 0.835201] fusb302 7-0022: lookup for GPIO discharge failed
[ 0.835210] fusb302 7-0022: GPIO lookup for consumer charge-en
[ 0.835218] fusb302 7-0022: using device tree for GPIO lookup
[ 0.835258] of_get_named_gpiod_flags: can't parse 'charge-en-gpios' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.835267] of_get_named_gpiod_flags: can't parse 'charge-en-gpio' property of node '/i2c@ff160000/fusb30x@22[0]'
[ 0.835275] fusb302 7-0022: using lookup tables for GPIO lookup
[ 0.835284] fusb302 7-0022: lookup for GPIO charge-en failed
[ 0.835444] fusb302 7-0022: Can't get property of role, set role to default DRP
[ 0.835614] fusb302 7-0022: fusb302 send extcon to disable vbus 5v
[ 0.838229] fusb302 7-0022: port 1 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[ 0.838361] mp8859 7-0066: GPIO lookup for consumer charge-en
[ 0.838374] mp8859 7-0066: using device tree for GPIO lookup
[ 0.838385] of_get_named_gpiod_flags: can't parse 'charge-en-gpios' property of node '/i2c@ff160000/mp8859@66[0]'
[ 0.838395] of_get_named_gpiod_flags: can't parse 'charge-en-gpio' property of node '/i2c@ff160000/mp8859@66[0]'
[ 0.838403] mp8859 7-0066: using lookup tables for GPIO lookup
[ 0.838412] mp8859 7-0066: lookup for GPIO charge-en failed
[ 0.839490] mp8859 7-0066: set mp8859 out 12v ok
[ 0.839505] mp8859 7-0066: register ext0 dev0
[ 0.839624] mp8859 7-0066: mp8859 probe successful
[ 0.839650] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff80097fa000
[ 0.840647] IR NEC protocol handler initialized
[ 0.840663] IR RC5(x/sz) protocol handler initialized
[ 0.840686] IR RC6 protocol handler initialized
[ 0.840700] IR JVC protocol handler initialized
[ 0.840713] IR Sony protocol handler initialized
[ 0.840726] IR SANYO protocol handler initialized
[ 0.840739] IR Sharp protocol handler initialized
[ 0.840752] IR MCE Keyboard/mouse protocol handler initialized
[ 0.840765] IR XMP protocol handler initialized
[ 0.840945] usbcore: registered new interface driver uvcvideo
[ 0.840956] USB Video Class driver (1.1.1)
[ 0.840973] CamSys driver version: v0.41.0, CamSys head file version: v1.0.0
[ 0.842356] fusb302 7-0022: port 1, state 3
[ 0.845104] __power_supply_register: Expected proper parent device for 'test_ac'
[ 0.845240] __power_supply_register: Expected proper parent device for 'test_battery'
[ 0.845482] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[ 0.845584] __power_supply_register: Expected proper parent device for 'test_usb'
[ 0.845961] cw_bat_probe cw_init error
[ 0.848214] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 0.848818] device-mapper: uevent: version 1.0.3
[ 0.849099] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.849236] Bluetooth: HCI UART driver ver 2.3
[ 0.849250] Bluetooth: HCI UART protocol H4 registered
[ 0.849258] Bluetooth: HCI UART protocol LL registered
[ 0.849269] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
[ 0.849277] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
[ 0.849284] rtk_btusb: Register usb char device interface for BT driver
[ 0.849469] usbcore: registered new interface driver rtk_btusb
[ 0.849905] cpu cpu0: cpu_leakage=16
[ 0.849969] cpu cpu0: cpu_leakage=16
[ 0.862016] cpu cpu0: temp=25625, pvtm=142687 (144527 + -1840)
[ 0.862571] cpu cpu4: cpu_leakage=26
[ 0.862632] cpu cpu4: cpu_leakage=26
[ 0.875040] cpu cpu4: temp=25625, pvtm=148762 (149898 + -1136)
[ 0.879746] sdhci: Secure Digital Host Controller Interface driver
[ 0.879784] sdhci: Copyright(c) Pierre Ossman
[ 0.879797] Synopsys Designware Multimedia Card Interface Driver
[ 0.880710] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.880899] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 0.880938] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 0.880992] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 0.881034] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 0.881230] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
[ 0.881262] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[ 0.881273] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
[ 0.881284] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
[ 0.881293] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[ 0.881303] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
[ 0.881314] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
[ 0.881323] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[ 0.881333] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
[ 0.881342] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
[ 0.881351] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[ 0.881361] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
[ 0.881504] vccio_sd: unsupportable voltage range: 3300000-3000000uV
[ 0.881544] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 0.881556] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 0.893352] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.907722] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 0.908019] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.908540] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
[ 0.908575] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
[ 0.908587] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
[ 0.908598] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
[ 0.908608] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
[ 0.908618] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
[ 0.909783] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 0.909813] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 0.936672] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 0.937357] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power[0]' - status (0)
[ 0.937506] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/user[0]' - status (0)
[ 0.938905] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.943497] usbcore: registered new interface driver usbhid
[ 0.943553] usbhid: USB HID core driver
[ 0.943705] inv_mpu_iio: inv_mpu_init:746
[ 0.944271] ashmem: initialized
[ 0.945636] rockchip-dmc dmc: unable to get devfreq-event device : dfi
[ 0.951195] ff100000.saradc supply vref not found, using dummy regulator
[ 0.953573] rknandbase v1.2 2018-05-08
[ 0.954460] usbcore: registered new interface driver snd-usb-audio
[ 0.956978] tc358749x 1-000f: GPIO lookup for consumer power18
[ 0.956995] tc358749x 1-000f: using device tree for GPIO lookup
[ 0.957010] of_get_named_gpiod_flags: can't parse 'power18-gpios' property of node '/i2c@ff110000/tc358749x@0f[0]'
[ 0.957023] of_get_named_gpiod_flags: can't parse 'power18-gpio' property of node '/i2c@ff110000/tc358749x@0f[0]'
[ 0.957035] tc358749x 1-000f: using lookup tables for GPIO lookup
[ 0.957047] tc358749x 1-000f: lookup for GPIO power18 failed
[ 0.957059] tc358749x 1-000f: GPIO lookup for consumer power
[ 0.957070] tc358749x 1-000f: using device tree for GPIO lookup
[ 0.957134] of_get_named_gpiod_flags: parsed 'power-gpios' property of node '/i2c@ff110000/tc358749x@0f[0]' - status (0)
[ 0.957172] tc358749x 1-000f: GPIO lookup for consumer power33
[ 0.957184] tc358749x 1-000f: using device tree for GPIO lookup
[ 0.957196] of_get_named_gpiod_flags: can't parse 'power33-gpios' property of node '/i2c@ff110000/tc358749x@0f[0]'
[ 0.957208] of_get_named_gpiod_flags: can't parse 'power33-gpio' property of node '/i2c@ff110000/tc358749x@0f[0]'
[ 0.957219] tc358749x 1-000f: using lookup tables for GPIO lookup
[ 0.957230] tc358749x 1-000f: lookup for GPIO power33 failed
[ 0.957242] tc358749x 1-000f: GPIO lookup for consumer int
[ 0.957252] tc358749x 1-000f: using device tree for GPIO lookup
[ 0.957286] of_get_named_gpiod_flags: parsed 'int-gpios' property of node '/i2c@ff110000/tc358749x@0f[0]' - status (0)
[ 0.957314] tc358749x 1-000f: GPIO lookup for consumer reset
[ 0.957325] tc358749x 1-000f: using device tree for GPIO lookup
[ 0.957360] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/i2c@ff110000/tc358749x@0f[0]' - status (0)
[ 0.957392] tc358749x 1-000f: GPIO lookup for consumer csi-ctl
[ 0.957404] tc358749x 1-000f: using device tree for GPIO lookup
[ 0.957416] of_get_named_gpiod_flags: can't parse 'csi-ctl-gpios' property of node '/i2c@ff110000/tc358749x@0f[0]'
[ 0.957428] of_get_named_gpiod_flags: can't parse 'csi-ctl-gpio' property of node '/i2c@ff110000/tc358749x@0f[0]'
[ 0.957439] tc358749x 1-000f: using lookup tables for GPIO lookup
[ 0.957450] tc358749x 1-000f: lookup for GPIO csi-ctl failed
[ 0.957462] tc358749x 1-000f: GPIO lookup for consumer stanby
[ 0.957473] tc358749x 1-000f: using device tree for GPIO lookup
[ 0.957484] of_get_named_gpiod_flags: can't parse 'stanby-gpios' property of node '/i2c@ff110000/tc358749x@0f[0]'
[ 0.957496] of_get_named_gpiod_flags: can't parse 'stanby-gpio' property of node '/i2c@ff110000/tc358749x@0f[0]'
[ 0.957507] tc358749x 1-000f: using lookup tables for GPIO lookup
[ 0.957518] tc358749x 1-000f: lookup for GPIO stanby failed
[ 0.957527] gpiod_direction_output: invalid GPIO
[ 0.957534] gpiod_direction_output: invalid GPIO
[ 0.957550] gpiod_direction_output: invalid GPIO
[ 0.967762] tc358749x 1-000f: tc358749x_i2c_probe success
[ 0.972939] u32 classifier
[ 0.972951] Actions configured
[ 0.973005] Netfilter messages via NETLINK v0.30.
[ 0.973076] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.973535] ctnetlink v0.93: registering with nfnetlink.
[ 0.974124] fusb302 7-0022: port 1, state 6
[ 0.974247] xt_time: kernel timezone is -0000
[ 0.974687] fusb302 7-0022: port 1, state 19
[ 0.974713] fusb302 7-0022: CC connected in CC2 as UFP
[ 0.975141] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.975431] fusb302 7-0022: port 1, state 20
[ 0.975456] fusb302 7-0022: port 1
[ 0.975468] fusb302 7-0022: orientation 1
[ 0.975479] fusb302 7-0022: power_role 0
[ 0.975490] fusb302 7-0022: data_role 0
[ 0.975501] fusb302 7-0022: cc 1
[ 0.975512] fusb302 7-0022: pd 0
[ 0.975523] fusb302 7-0022: enter_mode 0
[ 0.975548] fusb302 7-0022: pin support 0
[ 0.975550] arp_tables: (C) 2002 David S. Miller
[ 0.975569] fusb302 7-0022: pin def 0
[ 0.975580] fusb302 7-0022: attention 0
[ 0.975911] Initializing XFRM netlink socket
[ 0.976131] fusb302 7-0022: port 1, state 21
[ 0.976394] NET: Registered protocol family 10
[ 0.977591] mmc1: MAN_BKOPS_EN bit is not set
[ 0.981260] mip6: Mobile IPv6
[ 0.981361] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.983351] sit: IPv6 over IPv4 tunneling driver
[ 0.984173] NET: Registered protocol family 17
[ 0.984396] NET: Registered protocol family 15
[ 0.984621] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.985723] Bridge firewalling registered
[ 0.985807] Ebtables v2.0 registered
[ 0.986367] Bluetooth: RFCOMM TTY layer initialized
[ 0.986464] Bluetooth: RFCOMM socket layer initialized
[ 0.986692] Bluetooth: RFCOMM ver 1.11
[ 0.986880] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.987066] Bluetooth: BNEP filters: protocol multicast
[ 0.987276] Bluetooth: BNEP socket layer initialized
[ 0.987482] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.987683] Bluetooth: HIDP socket layer initialized
[ 0.987951] l2tp_core: L2TP core driver, V2.0
[ 0.988101] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 0.988298] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 0.989014] [BT_RFKILL]: Enter rfkill_rk_init
[ 0.989544] sensor_register_slave:mpu6500_gyro,id=49
[ 0.989593] sensor_register_slave:mpu6880_gyro,id=50
[ 0.990540] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 0.991908] Registered cp15_barrier emulation handler
[ 0.992044] Registered setend emulation handler
[ 0.992965] registered taskstats version 1
[ 0.994051] rockchip ion idev is NULL
[ 0.994090] rga2 ff680000.rga: rga ion client create success!
[ 0.994429] rga: Driver loaded successfully ver:3.02
[ 0.994512] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[ 0.995718] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: GPIO lookup for consumer otg-vbus
[ 0.995737] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: using device tree for GPIO lookup
[ 0.995752] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpios' property of node '/syscon@ff770000/usb2-phy@e450[0]'
[ 0.995763] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpio' property of node '/syscon@ff770000/usb2-phy@e450[0]'
[ 0.995773] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: using lookup tables for GPIO lookup
[ 0.995784] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: lookup for GPIO otg-vbus failed
[ 0.995793] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
[ 0.995815] phy phy-ff770000.syscon:usb2-phy@e450.2: Failed to get VBUS supply regulator
[ 0.997188] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: GPIO lookup for consumer otg-vbus
[ 0.997212] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: using device tree for GPIO lookup
[ 0.997226] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpios' property of node '/syscon@ff770000/usb2-phy@e460[0]'
[ 0.997237] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpio' property of node '/syscon@ff770000/usb2-phy@e460[0]'
[ 0.997247] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: using lookup tables for GPIO lookup
[ 0.997258] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: lookup for GPIO otg-vbus failed
[ 0.997268] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
[ 0.997290] phy phy-ff770000.syscon:usb2-phy@e460.4: Failed to get VBUS supply regulator
[ 0.998245] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[ 0.999379] rockchip-drm display-subsystem: defer getting devfreq
recovery filesystem table
=========================
0 /system ext4 /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2 /mnt/internal_sd vfat /dev/block/platform/fe330000.sdhci/by-name/user 0
3 /mnt/external_sd vfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/platform/fe330000.sdhci/by-name/system 0
5 /vendor ext4 /dev/block/platform/fe330000.sdhci/by-name/vendor 0
6 /oem ext4 /dev/block/platform/fe330000.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform/fe330000.sdhci/by-name/cache 0
8 /metadata ext4 /dev/block/platform/fe330000.sdhci/by-name/metadata 0
9 /data f2fs /dev/block/platform/fe330000.sdhci/by-name/userdata 0
10 /cust ext4 /dev/block/platform/fe330000.sdhci/by-name/cust 0
11 /custom ext4 /dev/block/platform/fe330000.sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.rsdhci/by-oname/radical_update 0
13 /misc emmc /dev/block/platform/fe33000u.sdhci/by-namepmisc 0
14 /uboot emmc /dev/block/platform/fe330000.sdhci/by-name/uboot 0
15 /ch arge emmc /dev/block/platform/fe330000.sdhci/by-name/charge 0
dev/block/platform/fe330000.sdhci/by-name/resource 0
17 /parame
ter emmc /dev/ block/platform/fe330000.sdhci/by-name/parameter 0
18 /boot emmc /dev/bloc k/pl atfo rm/fe330000.sdhci/by-name/boot 0
19 /recovery emmc /dev/block/platfo0rm/f.e3309000.sdhci/by-name/recovery 0
20 /backup emmc /dev/block/platform/fe3300009.sdh9ci/b6y-name/backup 0
21 /trust emmc /dev/block/platfo9rm/f5e330]000.sdhci/by-name/trust 0
22 /baseparamer emmc /dev/block/platf rm/fe330000.sdhci/by-name/baseparamer 0
23 r/frpo emmc /dev/block/platform/fe330000.sdhci/by-name/frp 0
24 /tmp cramdkisk cramdisk 0
emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_phointi_2 ips (null)
read cmdline
I:Got 2 arguments from boot message
�� component
[ 0.9997locale is [en_US]
5tage is0 []
reason is [(null)]
]W:Failed to read max brightness: No such file or directory
I:Sc reenrsaveor dicsabled
[ 0.999731]
[ 0.999750]
[ 0.999769]
[ 0.999780]
[ 0.999799]
[ 0.999811]
[ 0.999822]
[ 0.999836]
[ 0.999847]
[ 0.999903]
[ 0.999919] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 0.999928]
[ 0.999970]
[ 0.999993]
[ 1.000022]
[ 1.000067]
[ 1.000222] rockchip-vop ff900000.vop: unable to request PWM
[ 1.000257] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[ 1.000309]
[ 1.000326]
[ 1.000343]
[ 1.000354]
[ 1.000369]
[ 1.000381]
[ 1.000392]
[ 1.000409]
[ 1.000419]
[ 1.000433]
[ 1.000445] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 1.000454]
[ 1.002789] metada
[ 1.000515]
[ 1.000550]
[ 1.000594]
[ 1.000677] rockchip-vop ff8f0000.vop: unable to request PWM
[ 1.000702] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[ 1.001220] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 1.001262] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.001379] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.002002] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[ 1.002251] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[ 1.002670] parameter: 0x000000000 -- 0x000400000 (4 MB)
[ 1.002692] uboot: 0x000400000 -- 0x000800000 (4 MB)
[ 1.002702] trust: 0x000800000 -- 0x000c00000 (4 MB)
[ 1.002711] misc: 0x000c00000 -- 0x001000000 (4 MB)
[ 1.002719] resource: 0x001000000 -- 0x002000000 (16 MB)
[ 1.002732] kernel: 0x002000000 -- 0x004000000 (32 MB)
[ 1.002740] boot: 0x004000000 -- 0x006000000 (32 MB)
[ 1.002748] recovery: 0x006000000 -- 0x00a000000 (64 MB)
[ 1.002757] backup: 0x00a000000 -- 0x011000000 (112 MB)
[ 1.002765] security: 0x011000000 -- 0x011400000 (4 MB)
[ 1.002773] cache: 0x011400000 -- 0x031400000 (512 MB)
[ 1.002781] system: 0x031400000 -- 0x0d1400000 (2560 MB)
ta: 0x0d1400000 -- 0x0d2400000 (16 MB)
[ 1.002797] vendor: 0x0d2400000 -- 0x0f2400000 (512 MB)
[ 1.002805] oem: 0x0f2800000 -- 0x112800000 (512 MB)
[ 1.002813] frp: 0x112800000 -- 0x112880000 (0 MB)
[ 1.002822] userdata: 0x112880000 -- 0x3a3a00000 (10513 MB)
[ 1.002901] mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17
[ 1.003203] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[ 1.004628] cdn-dp fec00000.dp: cdn_dp_bind
[ 1.004628]
[ 1.004725] cdn-dp fec00000.dp: cdn_dp_bind drm_dp_aux_register
[ 1.004725]
[ 1.005242] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
[ 1.005396] cdn-dp fec00000.dp: cdn_dp_bind drm_of_find_possible_crtcs
[ 1.005396]
[ 1.005598] cdn-dp fec00000.dp: cdn_dp_bind drm_encoder_init
[ 1.005598]
[ 1.005811] cdn-dp fec00000.dp: cdn_dp_bind drm_encoder_helper_add
[ 1.005811]
[ 1.005997] cdn-dp fec00000.dp: cdn_dp_bind drm_connector_init
[ 1.005997]
[ 1.006253] cdn-dp fec00000.dp: cdn_dp_bind drm_connector_helper_add
[ 1.006253]
[ 1.006493] cdn-dp fec00000.dp: cdn_dp_bind drm_mode_connector_attach_encoder
[ 1.006493]
[ 1.006638] cdn-dp fec00000.dp: cdn_dp_bind cdn_dp_audio_codec_init
[ 1.006638]
[ 1.007042] cdn-dp fec00000.dp: cdn_dp_bind pm_runtime_enable
[ 1.007042]
[ 1.007275] cdn-dp fec00000.dp: cdn_dp_bind drm_connector_attach_content_protection_property
[ 1.007275]
[ 1.007295]
[ 1.007535]
[ 1.007595]
[ 1.007609] cdn-dp fec00000.dp: [drm:cdn_dp_pd_event_work] Not connected. Disabling cdn
[ 1.007618]
[ 1.007643]
[ 1.007886] rockchip-drm display-subsystem: bound fec00000.dp (ops cdn_dp_component_ops)
[ 1.010058] rockchip-drm display-subsystem: bound ff968000.dsi (ops dw_mipi_dsi_ops)
[ 1.010105] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.010117] [drm] No driver support for vblank timestamp query.
[ 1.010568] setup_initial_state
[ 1.010574] setup_initial_state drm_atomic_get_connector_state
[ 1.010597] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
[ 1.011438] setup_initial_state
[ 1.011641] setup_initial_state drm_atomic_get_connector_state
[ 1.073327] mp8859 7-0066: mp8859 get notify
[ 1.073362] mp8859 7-0066: mp8859 get ufp 1 dp 0
[ 1.074461] mp8859 7-0066: set mp8859 out 12v ok
[ 1.078939] rockchip-vop ff8f0000.vop: wait line flag timeout
[ 1.079403] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.079445] rk_iommu ff8f3f00.iommu: Page fault at 0x00000000f5c4d440 of type read
[ 1.079461] rk_iommu ff8f3f00.iommu: iova = 0x00000000f5c4d440: dte_index: 0x3d7 pte_index: 0x4d page_offset: 0x440
[ 1.079479] rk_iommu ff8f3f00.iommu: mmu_dte_addr: 0x0000000005153000 dte@0x0000000005153f5c: 0x000000 valid: 0 pte@0x0000000000000000: 0x000000 valid: 0 page@0x0000000000000000 flags: 0x0
[ 1.079491] VOP [ff900000.vop]: DISABLED
[ 1.079500]
0x00000000: 00000001 03068896 20809800 0003d000
0x00000010: 00000000 8000e402 00000000 00711c08
0x00000020: ed000000 00000000 00000000 00000000
0x00000030: 3a001085 00400000 00000000 01400147
0x00000040: f5c00000 00000000 0101028d 0101028d
0x00000050: 034b00f2 10001000 10001000 00000000
0x00000060: 00000000 00000000 00000000 00000021
0x00000070: 00000000 00000000 00000000 00000000
0x00000080: 00000000 00000000 00000000 00000000
0x00000090: 00000000 00000000 00000000 00000000
0x000000a0: 00000000 00000000 00000000 00000000
0x000000b0: 00000001 00501d00 01400140 01400140
0x000000c0: 00000000 00ef013f 000a000a 00000000
0x000000d0: 00000000 00ef013f 000a000a 00000000
0x000000e0: 00000000 00ef013f 000a000a 00000000
0x000000f0: 00000000 00ef013f 000a000a 00000000
0x00000100: 00000000 00000000 00000000 00000000
0x00000110: 00000000 00000000 00000000 00000000
0x00000120: 00000000 00000000 00000000 00000000
0x00000130: 00000000 00000000 00000000 00000000
0x00000140: 00000000 00000000 00000000 00000000
0x00000150: 00000000 00701d00 00000000 000a000a
0x00000160: 00000000 00000000 00000000 00000000
0x00000170: 001d0455 000c078c 10001000 00000000
0x00000180: 00000000 000a00fa 045d0005 001d0455
0x00000190: 07980005 000c078c 00000000 00000000
0x000001a0: 0000200a 00000000 00000000 00000000
0x000001b0: 00000000 d0010000 01000000 00000044
0x000001c0: 001db000 001f4000 000110f0 00000000
0x000001d0: 15110903 00030911 1a150b04 00040b15
0x000001e0: 15110903 00030911 12844821 21488412
0x000001f0: a55a9696 5aa56969 deb77bed ed7bb7de
0x00000200: 00000000 00000000 00000000 00000000
0x00000210: 00000000 00000000 00000000 00000000
0x00000220: 00000000 00000000 00000000 00000000
0x00000230: 00000000 00000000 00000000 00000000
0x00000240: 00000000 00000000 00000000 00000000
0x00000250: 00000000 00000000 00000000 00000000
0x00000260: 00000000 00000000 00000000 00000000
0x00000270: 00000000 00000000 00000000 00000000
0x00000280: 00000fe1 00000000 00000800 00007812
0x00000290: 00000000 00000000 00000000 00008000
0x000002a0: 078c078b 00010451 00000000 00000000
0x000002b0: 00000000 00000000 00000000 00000000
0x000002c0: 00000000 00000000 00000000 00000000
0x000002d0: 00000000 00000000 00000000 00000000
0x000002e0: 00000000 00000000 00000000 00000000
0x000002f0: 00000000 00000000 00000000 00000000
0x00000300: 00000000 00000000 00000000 00000000
0x00000310: 000000ff 01000000 100d1d7f 00000000
0x00000320: 00f100f1 00f10000 00f20000 00000000
0x00000330: 00000000 00000000 00000000 00000000
0x00000340: 00000000 00000000 00000a00 00000000
0x00000350: 00000000 00000000 00000000 00000000
0x00000360: 043c00f2 00000000 044b0430 00000003
0x00000370: 00000000 00000000 00000000 00000000
0x00000380: 00000000 00000000 00000000 00000000
0x00000390: 00000000 00000000 00000000 00000000
0x000003a0: 00000000 00000000 00000000 00000000
0x000003b0: 00000000 00000000 00000000 00000000
0x000003c0: 00000000 00000000 00000000 00000000
0x000003d0: 00000000 00000000 00000000 00000000
0x000003e0: 00000000 00000000 00000000 00000000
0x000003f0: 00000000 00000000 00000000 00000000 VOP [ff8f0000.vop]: ACTIVE
[ 1.080861] Connector: DSI
[ 1.080870] overlay_mode[0] bus_format[100a] output_mode[0] color_space[0]
[ 1.080883] Display mode: 1080x1920p70
[ 1.080893] clk[153000] real_clk[153000] type[8] flag[a]
[ 1.080902] H: 1080 1088 1093 1117
[ 1.080911] V: 1920 1932 1937 1944
[ 1.080920] win0-0: ACTIVE
[ 1.080933] format: BG16 little-endian (0x36314742) SDR[0] color_space[0]
[ 1.080942] csc: y2r[0] r2r[0] r2y[0] csc mode[0]
[ 1.080950] zpos: 0
[ 1.080958] src: pos[0x0] rect[500x501]
[ 1.080967] dst: pos[290x709] rect[500x501]
[ 1.080978] buf[0]: addr: 0x0000000000000000 pitch: 1000 offset: 339968
[ 1.080987] win2-0: DISABLED
[ 1.081026] win2-1: DISABLED
[ 1.081035] win2-2: DISABLED
[ 1.081044] win2-3: DISABLED
[ 1.081051] post: sdr2hdr[0] hdr2sdr[0]
[ 1.081059] pre : sdr2hdr[0]
[ 1.081067] post CSC: r2y[0] y2r[0] CSC mode[1]
[ 1.081088] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.081107] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.081125] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.081143] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.081161] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.081179] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.081197] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.081240] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.081258] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 1.114014] random: nonblocking pool is initialized
drm_fb_helper.c drm_fb_helper_single_add_all_connectors add fb_helper_connector
[ 1.119647] drm_fb_helper.c drm_fb_helper_single_add_all_connectors add fb_helper_connector
[ 1.119656] drm_fb_helper.c drm_fb_helper_single_add_all_connectors add fb_helper_connector
[ 1.132319] rockchip-drm display-subsystem: fb0: frame buffer device
[ 1.147067] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 1.147521] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 1
[ 1.147915] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.147995] xhci-hcd xhci-hcd.11.auto: irq 228, io mem 0xfe800000
[ 1.148202] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.148237] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.148251] usb usb1: Product: xHCI Host Controller
[ 1.148263] usb usb1: Manufacturer: Linux 4.4.126 xhci-hcd
[ 1.148274] usb usb1: SerialNumber: xhci-hcd.11.auto
[ 1.148963] hub 1-0:1.0: USB hub found
[ 1.149025] hub 1-0:1.0: 1 port detected
[ 1.149360] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 1.149658] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 2
[ 1.149761] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.149936] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.149971] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.149984] usb usb2: Product: xHCI Host Controller
[ 1.149996] usb usb2: Manufacturer: Linux 4.4.126 xhci-hcd
[ 1.150008] usb usb2: SerialNumber: xhci-hcd.11.auto
[ 1.150750] hub 2-0:1.0: USB hub found
[ 1.150809] hub 2-0:1.0: 1 port detected
[ 1.152874] xhci-hcd xhci-hcd.11.auto: remove, state 1
[ 1.152931] usb usb2: USB disconnect, device number 1
[ 1.233796] xhci-hcd xhci-hcd.11.auto: Host not halted after 16000 microseconds.
[ 1.233817] xhci-hcd xhci-hcd.11.auto: Host controller not halted, aborting reset.
[ 1.233991] xhci-hcd xhci-hcd.11.auto: USB bus 2 deregistered
[ 1.234719] xhci-hcd xhci-hcd.11.auto: remove, state 1
[ 1.234779] usb usb1: USB disconnect, device number 1
[ 1.235522] xhci-hcd xhci-hcd.11.auto: USB bus 1 deregistered
[ 1.240581] rockchip-dwc3 usb@fe800000: USB peripheral connected
[ 1.241608] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
[ 1.242101] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 1
[ 1.242457] xhci-hcd xhci-hcd.12.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.242609] xhci-hcd xhci-hcd.12.auto: irq 229, io mem 0xfe900000
[ 1.242913] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.242972] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.243174] usb usb1: Product: xHCI Host Controller
[ 1.243377] usb usb1: Manufacturer: Linux 4.4.126 xhci-hcd
[ 1.243580] usb usb1: SerialNumber: xhci-hcd.12.auto
[ 1.244613] hub 1-0:1.0: USB hub found
[ 1.244728] hub 1-0:1.0: 1 port detected
[ 1.245208] xhci-hcd xhci-hcd.12.auto: xHCI Host Controller
[ 1.245683] xhci-hcd xhci-hcd.12.auto: new USB bus registered, assigned bus number 2
[ 1.245852] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.246089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.246204] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.246405] usb usb2: Product: xHCI Host Controller
[ 1.246610] usb usb2: Manufacturer: Linux 4.4.126 xhci-hcd
[ 1.246811] usb usb2: SerialNumber: xhci-hcd.12.auto
[ 1.247681] hub 2-0:1.0: USB hub found
[ 1.247731] hubStarting recovery (pid 209) on Fri Jan 18 08:50:14 2013
recovery filesystem table
=========================
0 /system ext4 /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2 /mnt/internal_sd vfat /dev/block/platform/fe330000.sdhci/by-name/user 0
3 /mnt/external_sd vfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/platform/fe330000.sdhci/by-name/system 0
5 /vendor ext4 /dev/block/platform/fe330000.sdhci/by-name/vendor 0
6 /oem ext4 /dev/block/platform/fe330000.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform/fe330000.sdhci/by-name/cache 0
8 /metadata ext4 /dev/ block/plat2form/fe330000.sdhci/by-name/m-tadata 0
9 /data f2fs /dev0block/platform/fe3:30000.sdhci/by-name/userdata 10
10 /cust ext4 /dev/block./platform/fe330000.sdhci/by-n0ame/cust 0
11 /custom ext4 /dev/block platform/fe330000.1sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.sdhci/by-name/radical_update 0
1 3 /misc emmc /dev/block/platfporm/fe330000.sdhci/by-name/mirsc 0
14 /uboot emmc /dev/btlock/platform/fe330000.sdhci/by-name/uboot 0
15 /charge emmc /dev/block/platform/fe330000.sdhcdi/by-name/charge 0
16 /reseource emmc /dev/block/platform/fe330000.sdhci/byt-name/resource 0
17 /parameter emmc /dev/blocek/platform/fe33000c0.sdhci/byt-name/parameter 0
0 18 /boot ememc /dev/block/platform/fe330000.sdhci/by-name/boot
19 /recovery
emmc /dev/block/platform/fe330000.sdhci/by-name/[recovery 0
20 /backup emmc /dev/block/platform/fe330000.sdhci/by-name/backup 0
21 /trust emmc /dev/block/platform/fe330000.sdhci/by-name/trust 0
22 /baseparamer emmc /dev/bloc k/platform/fe33000 .sdhci/by-name/baseparamer 0
23 /frp emmc /dev/block/platform/fe330000.sdhci/by-n ame/frp 0
24 /tmp ramdisk ramdisk 0
emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_point_2 is (null)
read cmdline
1.248400I:Boot command: boot-recove]ry
I:Got 2 argume nts from bxoot message
hci-hcd xhci-hcd.12.auto: relocale is [en_US]
stage is []
reason is [(null)]
W:Failed to read max brightness: No such file orm directory
I:Screensaver disabled
ove, state 1
[ 1.248585] usb usb2: USB disconnect, device number 1
[ 1.249450] xhci-hcd xhci-hcd.12.auto: USB bus 2 deregistered
[ 1.249721] xhci-hcd xhci-hcd.12.auto: remove, state 1
[ 1.249924] usb usb1: USB disconnect, device number 1
[ 1.250790] xhci-hcd xhci-hcd.12.auto: USB bus 1 deregistered
[ 1.253661] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.254199] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 1.254535] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
[ 1.266588] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.266930] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.266990] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.267191] usb usb1: Product: EHCI Host Controller
[ 1.267394] usb usb1: Manufacturer: Linux 4.4.126 ehci_hcd
[ 1.267597] usb usb1: SerialNumber: fe380000.usb
[ 1.268591] hub 1-0:1.0: USB hub found
[ 1.268712] hub 1-0:1.0: 1 port detected
[ 1.272966] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.273585] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 1.273842] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
[ 1.286641] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.286789] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.286816] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.286825] usb usb2: Product: EHCI Host Controller
[ 1.286833] usb usb2: Manufacturer: Linux 4.4.126 ehci_hcd
[ 1.286842] usb usb2: SerialNumber: fe3c0000.usb
[ 1.287587] hub 2-0:1.0: USB hub found
[ 1.287637] hub 2-0:1.0: 1 port detected
[ 1.288410] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 1.288776] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 1.288959] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
[ 1.344198] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.344229] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.344254] usb usb3: Product: Generic Platform OHCI controller
[ 1.344276] usb usb3: Manufacturer: Linux 4.4.126 ohci_hcd
[ 1.344299] usb usb3: SerialNumber: fe3a0000.usb
[ 1.345749] hub 3-0:1.0: USB hub found
[ 1.345828] hub 3-0:1.0: 1 port detected
[ 1.347615] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 1.348277] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 1.348636] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
[ 1.404104] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.404135] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.404146] usb usb4: Product: Generic Platform OHCI controller
[ 1.404156] usb usb4: Manufacturer: Linux 4.4.126 ohci_hcd
[ 1.404165] usb usb4: SerialNumber: fe3e0000.usb
[ 1.404828] hub 4-0:1.0: USB hub found
[ 1.404880] hub 4-0:1.0: 1 port detected
[ 1.406280] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[ 1.406454] rockchip-dmc dmc: could not find power_model node
[ 1.407282] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present
[ 1.407316] hdmi-audio-codec hdmi-audio-codec.10.auto: ASoC: Failed to add ELD: -16
[ 1.407926] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok
[ 1.408001] hdmi-audio-codec hdmi-audio-codec.10.auto: ASoC: Failed to create Playback debugfs file
[ 1.412066] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:03 UTC (1358499003)
[ 1.413472] It doesn't contain Rogue gpu
[ 1.476754] fusb302 7-0022: port 1, state 26
[ 1.484015] fusb302 7-0022: port 1, state 28
[ 1.485895] fusb302 7-0022: port 1, state 29
[ 1.491538] vcc_sd: disabling
[ 1.527739] ret 1024
[ 1.528450] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 415; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-b34db9406a', rk_ko_ver is '5', bui.
[ 1.529119] Mali: Mali device driver loaded
[ 1.529940] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
[ 1.530168] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
[ 1.530674] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
[ 1.544791] rockchip-pinctrl pinctrl: unsupported driver strength 20
[ 1.544822] rockchip-pinctrl pinctrl: pin_config_set op failed for pin 122
[ 1.544843] usb-ext-charge usb-charge: Error applying setting, reverse things back
[ 1.544938] usb-ext-charge usb-charge: GPIO lookup for consumer charge-en
[ 1.544957] usb-ext-charge usb-charge: using device tree for GPIO lookup
[ 1.545011] of_get_named_gpiod_flags: parsed 'charge-en-gpios' property of node '/usb-charge[0]' - status (0)
[ 1.545056] usb-ext-charge usb-charge: GPIO lookup for consumer cur-ctl
[ 1.545074] usb-ext-charge usb-charge: using device tree for GPIO lookup
[ 1.545127] of_get_named_gpiod_flags: parsed 'cur-ctl-gpios' property of node '/usb-charge[0]' - status (0)
[ 1.545171] usb-ext-charge usb-charge: GPIO lookup for consumer poe-state
[ 1.545189] usb-ext-charge usb-charge: using device tree for GPIO lookup
[ 1.545239] of_get_named_gpiod_flags: parsed 'poe-state-gpios' property of node '/usb-charge[0]' - status (0)
[ 1.545304] of_get_named_gpiod_flags: parsed 'bat-int' property of node '/usb-charge[0]' - status (0)
[ 1.545349] usb-ext-charge usb-charge: interrupt happend
[ 1.565235] usb-ext-charge usb-charge: register ext0 dev0
[ 1.571281] usb-ext-charge usb-charge: uec get notify
[ 1.571295] usb-ext-charge usb-charge: uec get ufp 1 pd 0
[ 1.571304] usb-ext-charge usb-charge: usb status 1 battery_online 0 poe_online 0
[ 1.571321] usb-ext-charge usb-charge: probe success
[ 1.571976] ALSA device list:
[ 1.571988] #0: rk-hdmi-dp-sound
[ 1.572463] Freeing unused kernel memory: 832K
[ 1.575357] init: init first stage started!
[ 1.575465] init: First stage mount skipped (recovery mode)
[ 1.575865] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 1.575919] vendor storage:20160801 ret = 0
[ 1.576086] init: Skipped setting INIT_AVB_VERSION (not vbmeta compatible)
[ 1.576113] init: Loading SELinux policy
[ 1.580421] SELinux: 4096 avtab hash slots, 13389 rules.
[ 1.586994] SELinux: 4096 avtab hash slots, 13389 rules.
[ 1.587037] SELinux: 1 users, 2 roles, 1196 types, 0 bools, 1 sens, 1024 cats
[ 1.587067] SELinux: 92 classes, 13389 rules
[ 1.589059] SELinux: Completing initialization.
[ 1.589076] SELinux: Setting up existing superblocks.
[ 1.593357] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 1.704757] audit: type=1403 audit(1358499003.790:2): policy loaded auid=4294967295 ses=4294967295
[ 1.705148] selinux: SELinux: Loaded policy from /sepolicy
[ 1.705148]
[ 1.711171] selinux: SELinux: Loaded file_contexts
[ 1.711171]
[ 1.715479] init: init second stage started!
[ 1.721089] init: Using Android DT directory /proc/device-tree/firmware/android/
[ 1.721580] init: Set boot.mode to emmc
[ 1.721619] init: property_set("ro.boot.mode", "emmc") failed: property already set
[ 1.724063] selinux: SELinux: Loaded file_contexts
[ 1.724063]
[ 1.724660] selinux: SELinux: Loaded property_contexts from /plat_property_contexts & /nonplat_property_contexts.
[ 1.724660]
[ 1.724687] init: Running restorecon...
[ 1.727938] selinux: SELinux: Could not stat /dev/block: No such file or directory.
[ 1.727938]
[ 1.728265] init: waitid failed: No child processes
[ 1.728328] init: Couldn't load property file: Unable to open '/system/etc/prop.default': No such file or directory: No such file or directory
[ 1.729105] init: property_set("ro.product.first_api_level", "26") failed: property already set
[ 1.729170] init: property_set("ro.board.platform", "rk3399") failed: property already set
[ 1.729970] init: property_set("ro.target.product", "tablet") failed: property already set
[ 1.730053] init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
[ 1.730099] init: Couldn't load property file: Unable to open '/vendor/default.prop': No such file or directory: No such file or directory
[ 1.730675] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
[ 1.730855] init: Parsing file /init.rc...
[ 1.730967] init: Added '/init.bootmode.emmc.rc' to import list
[ 1.730998] init: Added '/init.recovery.rk30board.rc' to import list
[ 1.731024] init: Added '/init.rk30board.usb.rc' to import list
[ 1.731044] init: Added '/init.usb.configfs.rc' to import list
[ 1.731398] init: Parsing file /init.bootmode.emmc.rc...
[ 1.731442] init: Unable to open '/init.bootmode.emmc.rc': No such file or directory
[ 1.731467] init: /init.rc: 1: Could not import file '/init.bootmode.emmc.rc': No such file or directory
[ 1.731500] init: Parsing file /init.recovery.rk30board.rc...
[ 1.731540] init: Unable to open '/init.recovery.rk30board.rc': No such file or directory
[ 1.731563] init: /init.rc: 2: Could not import file '/init.recovery.rk30board.rc': No such file or directory
[ 1.731593] init: Parsing file /init.rk30board.usb.rc...
[ 1.731917] init: Parsing file /init.usb.configfs.rc...
[ 1.732497] init: Parsing file /system/etc/init...
[ 1.732544] init: Unable to open '/system/etc/init': No such file or directory
[ 1.732577] init: Parsing file /vendor/etc/init...
[ 1.732616] init: Unable to open '/vendor/etc/init': No such file or directory
[ 1.732647] init: Parsing file /odm/etc/init...
[ 1.732684] init: Unable to open '/odm/etc/init': No such file or directory
[ 1.732747] init: processing action (early-init) from (/init.rc:6)
[ 1.732854] init: starting service 'ueventd'...
[ 1.733992] init: processing action (wait_for_coldboot_done) from (<Builtin Action>:0)
[ 1.736728] ueventd: ueventd started!
[ 1.870712] selinux: SELinux: Loaded file_contexts
[ 1.870712]
[ 1.981092] ueventd: Coldboot took 0.238 seconds
[ 1.984945] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_done (<Builtin Action>:0) returned 0 took 250ms.
[ 1.985037] init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
[ 1.985132] init: /dev/hw_random not found
[ 1.985222] init: processing action (set_mmap_rnd_bits) from (<Builtin Action>:0)
[ 1.986816] init: processing action (set_kptr_restrict) from (<Builtin Action>:0)
[ 1.987328] init: processing action (keychord_init) from (<Builtin Action>:0)
[ 1.987407] init: processing action (console_init) from (<Builtin Action>:0)
[ 1.987503] init: processing action (init) from (/init.rc:12)
[ 1.996983] init: processing action (mix_hwrng_into_linux_rng) from (<Builtin Action>:0)
[ 1.997080] init: /dev/hw_random not found
[ 1.997163] init: processing action (late-init) from (/init.rc:58)
[ 1.997323] init: processing action (queue_property_triggers) from (<Builtin Action>:0)
[ 1.997426] init: processing action (load_system_props_action) from (/init.rc:51)
[ 1.997528] init: Couldn't load property file: Unable to open '/system/build.prop': No such file or directory: No such file or directory
[ 1.997611] init: Couldn't load property file: Unable to open '/odm/build.prop': No such file or directory: No such file or directory
[ 1.997694] init: Couldn't load property file: Unable to open '/vendor/build.prop': No such file or directory: No such file or directory
[ 1.997774] init: Couldn't load property file: Unable to open '/factory/factory.prop': No such file or directory: No such file or directory
[ 2.006914] init: processing action (firmware_mounts_complete) from (/init.rc:54)
[ 2.007020] init: processing action (persist.sys.usb.config=* && boot) from (/init.rc:36)
[ 2.007091] init: processing action (boot) from (/init.rc:43)
[ 2.007783] init: starting service 'charger'...
[ 2.008623] init: starting service 'recovery'...
[ 2.009309] init: processing action (boot) from (/init.rk30board.usb.rc:1)
[ 2.019448] healthd: BatteryCurrentNowPath not found
[ 2.019494] healthd: BatteryCycleCountPath not found
[ 2.021233] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 2.024240] file system registered
[ 2.027008] using random self ethernet address
[ 2.027031] using random host ethernet address
[ 2.027149] init: Unable to open '/config/usb_gadget/g1/functions/rndis.gs4/wceis': Permission denied
[ 2.028375] init: processing action (enable_property_trigger) from (<Builtin Action>:0)
[ 2.028511] init: processing action (ro.debuggable=1) from (/init.rc:92)
[ 2.028548] init: starting service 'adbd'...
[ 2.029485] audit: type=1400 audit(1358499004.113:5): avc: granted { read } for pid=1 comm="init" name="ttyFIQ0" dev="tmpfs" ino=2880 scontext=u:r:init:s0 tcontext=u:object_r:serial_device:s0 tclass=ce
[ 2.029794] init: starting service 'console'...
[ 2.034538] read strings
[ 2.568460] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_SDP_CHARGER
[ 2.674999] fusb302 7-0022: port 1, state 28
[ 2.676870] fusb302 7-0022: port 1, state 29
[ 2.842059] android_work: did not send uevent (0 0 (null))
[ 2.991033] android_work: sent uevent USB_STATE=CONNECTED
[ 2.992775] configfs-gadget gadget: high-speed config #1: b
[ 2.993390] android_work: sent uevent USB_STATE=CONFIGURED
[ 3.363413] fusb302 7-0022: port 1, state 19
[ 3.364115] fusb302 7-0022: port 1, state 20
[ 3.364758] fusb302 7-0022: port 1, state 21
[ 3.865500] fusb302 7-0022: port 1, state 0
[ 3.865548] fusb302 7-0022: PD disabled
[ 5.590812] usb-ext-charge usb-charge: adc value = 319
[ 5.590847] usb-ext-charge usb-charge: usb status 1 battery_online 1 poe_online 0
[ 6.079868] vop_isr: 778595 callbacks suppressed
[ 6.079893] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 6.079917] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 6.079940] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 6.079962] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 6.079984] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 6.080006] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 6.080028] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 6.080049] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 6.080071] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 6.080093] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 7.008999] init: starting service 'recovery'...
[ 7.009725] init: property_set("ro.boottime.recovery", "7006129511") failed: property already set
[ 7.374249] init: Service 'recovery' (pid 207) killed by signal 11
[ 7.374364] init: Sending signal 9 to service 'recovery' (pid 207) process group...
[ 7.374620] init: Successfully killed process cgroup uid 0 pid 207 in 0ms
[ 11.105450] vop_isr: 618619 callbacks suppressed
[ 11.105493] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 11.105518] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 11.105542] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 11.105568] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 11.105591] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 11.105612] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 11.105634] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 11.105656] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 11.105678] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 11.105700] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 12.009382] init: starting service 'recovery'...
[ 12.010129] init: property_set("ro.boottime.recovery", "12006518514") failed: property already set
[ 12.310913] init: Service 'recovery' (pid 209) killed by signal 11
[ 12.311000] init: Sending signal 9 to service 'recovery' (pid 209) process group...
[ 12.311286] init: Successfully killed process cgroup uid 0 pid 209 in 0ms
[ 16.106539] vop_isr: 671299 callbacks suppressed
[ 16.106567] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 16.106585] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 16.106601] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 16.106619] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 16.106635] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 16.106651] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 16.106667] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 16.106683] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 16.106699] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 16.106715] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
** 95 console messages dropped **
[ 17.009770] init: starting service 'recovery'...
Starting recovery (pid 211) on Fri Jan 18 08:50:19 2013
recovery filesystem table
=========================
0 /system ext4 /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2 /mnt/internal_sd vfat /dev/block/platform/fe330000.sdhci/by-name/user 0
3 /mnt/external_sd vfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/platform/fe330000.sdhci/by-name/system 0
5 /vendor ext4 /dev/block/platform/fe330000.sdhci/by-name/vendor 0
6 /oem ext4 /dev/block/platform/fe330000.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform/fe330000.sdhci/by-name/cache 0
8 /metadata ext4 /dev/block/platform/fe330000.sdhci/by-name/metadata 0
9 /data f2fs /dev/block/platform/fe330000.sdhci/by-name/userdata 0
10 /cust ext4 /dev/block/platform/fe330000.sdhci/by-name/cust 0
11 /custom ext4 /dev/block/platform/fe330000.sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.sdhci/by-name/radical_update 0
13 /misc emmc /dev/block/platform/fe330000.sdhci/by-name/misc 0
14 /uboot emmc /dev/block/platform/fe330000.sdhci/by-name/uboot 0
15 /charge emmc /dev/block/platform/fe330000.sdhci/by-name/charge 0
16 /resource emmc /dev/block/platform/fe330000.sdhci/by-name/resource 0
17 /parameter emmc /dev/block/platform/fe330000.sdhci/by-name/parameter 0
18 /boot emmc /dev/b[lock /pla tform/fe330000.sdhci/by-name/boot 0
19 /recovery emmc /dev/block/platform fe33100007.sdh.ci/b0y-name/recovery 0
5 20 /backup emmc /dev/block/platform/fe330000.sdhci/by-name/b1acku0p 0
261 /trust emmc /dev/block/platform/fe330000.sdhci/by-name/trust 0
22 /baseparam4er e]mmc /dev/block/platform/fe330000.sdhci/by-name/baseparamer 0
23 /frp emmc /deiv/blnock/iplatform/fe330000.sdhci/by-name/frp 0
24 /ttmp ramdis:k ramdisk 0
emmc_point is /dev/block/mmcblk1
sd_point is (null )
sd_point_2 is (null)
read cmdline
property_set("ro.boottime.recovery", "17006916391") failed: property already set
I:Boot command: boot-recovery
I:Got 2 arguments from boot message
locale is [en_US]
stage is []
reason is [(null)]
W:Failed to read max brightness: No such file or directory
I:Screensaver disabled
[ 17.407322] init: Service 'recovery' (pid 211) killed by signal 11
[ 17.407446] init: Sending signal 9 to service 'recovery' (pid 211) process group...
[ 17.407703] init: Successfully killed process cgroup uid 0 pid 211 in 0ms
[ 21.109887] vop_isr: 529252 callbacks suppressed
[ 21.109992] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 21.110028] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 21.110060] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 21.110091] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 21.110123] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 21.110154] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 21.110184] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 21.110216] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 21.110246] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 21.110278] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 22.010170] init: starting service 'recovery'...
[ 22.010832] init: property_set("ro.boottime.recovery", "22007298935") failed: property already set
Starting recovery (pid 213) on Fri Jan 18 08:50:24 2013
recovery filesystem table
=========================
0 /system ext4 /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2 /mnt/internal_sd vfat /dev/block/platform/fe330000.sdhci/by-name/user 0
3 /mnt/external_sd vfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/platform/fe330000.sdhci/by-name/system 0
5 /vendor ext4 /dev/block/platform/fe330000.sdhci/by-name/vendor 0
6 /oem ext4 /dev/block/platform/fe330000.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform/fe330000.sdhci/by-name/cache 0
8 /metadata ext4 /dev/block/platform/fe330000.sdhci/by-name/metadata 0
9 /data f2fs /dev/block/platform/fe330000.sdhci/by-name/userdata 0
10 /cust ext4 /dev/block/platform/fe330000.sdhci/by-name/cust 0
11 /custom ext4 /dev/block/platform/fe330000.sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.sdhci/by-name/radical_update 0
13 /misc emmc /dev/block/platform/fe330000.sdhci/by-name/misc 0
14 /uboot emmc /dev/block/platform/fe330000.sdhci/by-name/uboot 0
15 /charge emmc /dev/block/platform/fe330000.sdhci/by-name/charge 0
16 /resource emmc /dev/block/platform/fe330000.sdhci/by-name/resource 0
17 /parameter emmc /dev/block/platform/fe330000.sdhci/by-name/parameter 0
18 /boot emmc /dev/block/platform/fe330000.sdhci/by-name/boot 0
19 /recovery emmc /dev/block/platform/fe330000.sdhci/by-name/recovery 0
20 /backup emmc /dev/block/platform/fe330000.sdhci/by-name/backup 0
21 /trust emmc /dev/block/platform/fe330000.sdhci/by-name/trust 0
22 /baseparamer emmc /dev/block/platform/fe330000.sdhci/by-name/baseparamer 0
23 /frp emmc /dev/block/platform/fe330000.sdhci/by-name/frp 0
24 /tmp ramdisk ramdisk 0
emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_point_2 is (null)
read cmdline
I:Boot command: boot-recovery
I:Got 2 arguments from boot message
locale is [en_US]
stage is []
reason is [(null)]
W:Failed to read max brightness: No such file or directory
I:Screensaver disabled
[ 22.390786] init: Service 'recovery' (pid 213) killed by signal 11
[ 22.390911] init: Sending signal 9 to service 'recovery' (pid 213) process group...
[ 22.391175] init: Successfully killed process cgroup uid 0 pid 213 in 0ms
[ 26.124810] vop_isr: 443267 callbacks suppressed
[ 26.124914] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 26.124967] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 26.125001] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 26.125032] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 26.125064] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 26.125095] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 26.125126] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 26.125157] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 26.125188] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 26.125219] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 27.010550] init: starting service 'recovery'...
Starting recovery (pid 215) on Fri Jan 18 08:50:29 2013
recovery filesystem table
=========================
0 /system ext4 /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2 /mnt/internal_sd vfat /dev/block/platform/fe330000.sdhci/by-name/user 0
3 /mnt/external_sd vfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/platform/fe330000.sdhci/by-name/system 0
5 /vendor ext4 /dev/block/platform/fe330000.sdhci/by-name/vendor 0
6 /oem ext4 /dev/block/platform/fe330000.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform/fe330000.sdhci/by-name/cache 0
8 /metadata ext4 /dev/block/platform/fe330000.sdhci/by-name/metadata 0
9 /data f2fs /dev/block/platform/fe330000.sdhci/by-name/userdata 0
10 /cust ext4 /dev/block/platform/fe330000.sdhci/by-name/cust 0
11 /custom ext4 /dev/block/platform/fe330000.sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.sdhci/by-name/radical_update 0
13 /misc emmc /dev/block/platform/fe330000.sdhci/by-name/misc 0
14 /uboot emmc /dev/block/platform/fe330000.sdhci/by-name/uboot 0
15 /charge emmc /dev/block/platform/fe330000.sdhci/by-name/charge 0
16 /resource emmc /dev/block/platform/fe330000.sdhci/by-name/resource 0
17 /parameter emmc /dev/block/platform/fe330000.sdhci/by-name/parameter 0
18 /boot emmc /dev/block/platform/fe330000.sdhci/by-name/boot 0
19 /recovery emmc /dev/block/platform/fe330000.sdhci/by-name/recovery 0
20 /backup emmc /dev/block/platform/fe330000.sdhci/by-name/backup 0
21 /trust emmc /dev/block/platform/fe330000.sdhci/by-name/trust 0
22 /baseparamer emmc /dev/block/platform/fe330000.sdhci/by-name/baseparamer 0
23 /frp emmc /dev/block/platform/fe330000.sdhci/by-name/frp[ 0
24 tmp ramdisk ramdisk 0
emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_po2int_72 is (null)
read cmdline
.011307] init: property_set("ro.boottI:Boot command: boot-recovery
I:Got 2 arguments from boot message
ime.recovery", "27007692896") falocale is [en_US]
stage is []
reason is [(null)]
iW:Failed to read max brightnelss: eNo sduch file or directory
I:Screensaver disabled
: property already set
[ 27.281120] init: Service 'recovery' (pid 215) killed by signal 11
[ 27.281255] init: Sending signal 9 to service 'recovery' (pid 215) process group...
[ 27.281471] init: Successfully killed process cgroup uid 0 pid 215 in 0ms
[ 31.126549] vop_isr: 470023 callbacks suppressed
[ 31.126653] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 31.126689] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 31.126721] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 31.126753] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 31.126784] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 31.126815] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 31.126845] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 31.126876] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 31.126907] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 31.126938] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 32.010923] init: starting service 'recovery'...
Starting recovery (pid 217) on Fri Jan 18 08:50:34 2013
recovery filesystem table
=========================
0 /system ext4 /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2 /mnt/internal_sd vfat /dev/block/platform/fe330000.sdhci/by-name/user 0
3 /mnt/external_sd vfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/platform/fe330000.sdhci/by-name/system 0
5 /vendor ext4 /dev/block/platform/fe330000.sdhci/by-name/vendor 0
6 /oem ext4 /dev/block/platform/fe330000.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform/fe330000.sdhci/by-name/cache 0
8 /metadata ext4 /dev/block/platform/fe330000.sdhci/by-name/metadata 0
9 /data f2fs /dev/block/platform/fe330000.sdhci/by-name/userdata 0
10 /cust ext4 /dev/block/platform/fe330000.sdhci/by-name/cust 0
11 /custom ext4 /dev/block/platform/fe330000.sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.sdhci/by-name/radical_update 0
13 /misc emmc /dev/block/platform/fe330000.sdhci/by-name/misc 0
14 /uboot emmc /dev/block/platform/fe330000.sdhci/by-name/uboot 0
15 /charge emmc /dev/block/platform/fe330000.sdhci/by-name/charge 0
16 /resource emmc /dev/block/platform/fe330000.sdhci/by-name/resource 0
17 /parameter emmc /dev/block/platform/fe330000.sdhci/by-name/parameter 0
18 /boot emmc /dev/block/platform/fe330000.sdhci/by-name/boot 0
19 /recovery emmc /dev/block/platform/fe330000.sdhci/by-name/recovery 0
20 /backup emmc /dev/block/platform/fe330000.sdhci/by-name/backup 0
21 /trust emmc /dev/block/platform/fe330000.sdhci/by-name/trust 0
22 /baseparamer emmc /dev/block/platform/fe330000.sdhci/by-name/baseparamer 0
23 /frp emmc /dev/block/platform/fe330000.sdhci/by-name/frp 0
24 /tm[p ra mdis k ramdisk 0
emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_poin t_2 3is (2null)
read cmdline
.011699]I:Boot command: boot-recovery
:Got 2 arguments from boot message
init: property_set("ro.bolocale is [en_US]
staoge its []t
reason is [(null)]
iW:Failed to read max brimghtness: No such file or directory
I:Screensa.ver disabled
recovery", "32008057148") failed: property already set
[ 32.277506] init: Service 'recovery' (pid 217) killed by signal 11
[ 32.277586] init: Sending signal 9 to service 'recovery' (pid 217) process group...
[ 32.277815] init: Successfully killed process cgroup uid 0 pid 217 in 0ms
[ 36.129878] vop_isr: 461035 callbacks suppressed
[ 36.129978] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 36.130015] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 36.130047] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 36.130079] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 36.130110] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 36.130141] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 36.130172] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 36.130204] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 36.130235] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 36.130266] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
Starting recovery (pid 219) on Fri Jan 18 08:50:39 2013
recovery filesystem table
=========================
0 /system ext4 /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2 /mnt/internal_sd vfat /dev/block/platform/fe330000.sdhci/by-name/user 0
3 /mnt/external_sd vfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/[platform/fe330000.sdhci/by-name/system 0
5 /vendor ext4 /dev/block/platform/fe330000.sdhci/by-name/vendor 0
6 /oem ext4 /dev/block/platform/fe330000.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform /fe330000.sdhci/by-name/cache 0
83 /metadata7 ext4 /dev./block/platform/fe330000.sdhci/by-name/metadata 0
9 /data f02fs /dev/block/platform/fe330000.sdhci/by-name/userdata 0
10 /cust ext4 /dev/block/platform/fe330000.sdhci/by-name/cust 0
11 /custom ext4 /dev/block/platform/fe330000.sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.sdhci/by-name/radical_update 0
13 /misc emmc /dev/block/platform/fe330000.sdhci/by-name/misc 0
14 /uboot emmc /dev/block/platform/fe330000.sdhci/by-name/uboot 0
15 /charge emmc /dev/block/platform/fe330000.sdhci/by-name/charge 0
16 /resource emmc /dev/block/platform/fe330000.sdhci/by-name/resource 0
17 /parameter emmc /dev/block/platform/fe330000.sdhci/by-name/parameter 0
18 /boot emmc /dev/block/platform/fe330000.sdhci/by-name/boot 0
19 /recovery emmc /dev/block/platform/fe330000.sdhci/by1-name/recovery 0
21 /backup emmc /dev/block/platform/fe330000.sdhci/by-name/backup 0
21 /3trust emmc /dev/block/platform/fe330000.sdhci/by-name/trust 0
22 /baseparamer emmc /dev/block/platform/fe330000.sdhci/by-name/baseparamer 0
203 /frp emm8c /dev/block/platform/fe330000.sdhci/by-name/frp 0
24 /tmp ramdisk ramdisk 0
emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_point_2 is (null)
read cmdline
] init: starting service 'recovery'...
[ 37.011978] init: propI:Boot command: boot-recovery
I:Got 2 areuments from boort message
ty_set("ro.boottime.reclocoale is [en_US]
stage is []
reason is [(null)]
We:Failed to readr max brightness: No such file or directory
I:Screensavery disabled
", "37008454692") failed: property already set
[ 37.401217] init: Service 'recovery' (pid 219) killed by signal 11
[ 37.401345] init: Sending signal 9 to service 'recovery' (pid 219) process group...
[ 37.401606] init: Successfully killed process cgroup uid 0 pid 219 in 0ms
[ 41.143993] vop_isr: 442726 callbacks suppressed
[ 41.144099] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 41.144142] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 41.144175] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 41.144207] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 41.144238] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 41.144270] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 41.144301] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 41.144332] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 41.144363] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 41.144394] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 42.011705] init: starting service 'recovery'...
[ 42.01238Starting recovery (pid 221) on Fri Jan 18 08:50:434 2013
] inirecovery filesystemt table
=========================
0 /system ext4 /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2: /mnt/internal_sd vfat /dev/blo ck/platform/fe330000.sdhci/by-name/user 0
3 /mnpt/external_sd vrfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/platform/fe330000.sdhci/by-name/system 0
5 /vendor ext4 /dev/block/platform/fe330000.sdhci/by-name/vendor 0
6 /oem ext4 /dev/block/platform/fe330000.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform/fe330000.sdhci/by-name/cache 0
8 /metadata ext4 /dev/block/platform/fe330000.sdhci/by-name/metadata 0
9 /data f2fs /dev/block/platform/fe330000.sdhci/by-name/userdata 0
10 /cust ext4 /dev/block/platform/fe330000.sdhci/by-name/cust 0
11 /custom ext4 /dev/block/platform/fe330000.sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.sdhci/by-name/radical_update 0
13 /misc emmc /dev/block/platform/fe330000.sdhci/by-name/misc 0
14 /uboot emmc /dev/block/plaotform/fe330000.sdhci/by-namep/uboot e0
15 /charge emmc /dev/block/platrform/fe330000.sdhci/by-name/charge 0
16 /resource emmct /dev/block/platform/fe330000.sdhci/yby-name_/resource 0
17 /parameters emmc /edev/block/platform/fe330000.tdhci/by-name/parameter 0
(18 /boot emmc /dev/block/platform/fe330000.sdhci/by-name/boot 0
" 19 /rercovery emmc /dev/block/platform/fe330000.sdhci/by-name/recovery 0
20 /backup emmc /dev/block/platform/fe330000.sdhci/by-name/backup 0
21 /trust emmc /dev/block/platform/fe330000.sdhci/by-name/trust 0
22 /baseparamer emmc /dev/block/platform/fe330000.sdhci/by-name/baseparamer 0
23 /frp emmc /dev/block/platform/fe330000.sdhci/by-name/frp 0
24 /tmp ramdisk ramdisk 0
emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_point_2 is (null)
read cmdline
o.boottime.recovery", "42008839487") failed: property already set
I:Boot command: boot-recovery
I:Got 2 arguments from boot message
locale is [en_US]
stage is []
reason is [(null)]
W:Failed to read max brightness: No such file or directory
I:Screensaver disabled
[ 42.377053] init: Service 'recovery' (pid 221) killed by signal 11
[ 42.377176] init: Sending signal 9 to service 'recovery' (pid 221) process group...
[ 42.377404] init: Successfully killed process cgroup uid 0 pid 221 in 0ms
[ 46.146548] vop_isr: 469053 callbacks suppressed
[ 46.146648] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 46.146685] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 46.146718] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 46.146750] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 46.146781] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 46.146812] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 46.146843] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 46.146874] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 46.146905] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 46.146936] rockchip-vop ff8f0000.vop: [drm:vop_isr] *ERROR* POST_BUF_EMPTY irq err
[ 47.012091] init: starting service 'recovery'...
Starting recovery (pid 223) on Fri Jan 18 08:50:49 2013
recovery filesystem table
=========================
0 /system ext4 /dev/block/by-name/system 0
1 /vendor ext4 /dev/block/by-name/vendor 0
2 /mnt/internal_sd vfat /dev/block/platform/fe330000.sdhci/by-name/user 0
3 /mnt/external_sd vfat /dev/block/mmcblk0p1 0
4 /system ext4 /dev/block/platform/fe330000.sdhci/by-name/system 0
5 /vendor ext4 /dev/block/platform/fe330000.sdhci/by-name/vendor 0
6 /oem ext4 /dev/block/platform/fe330000.sdhci/by-name/oem 0
7 /cache ext4 /dev/block/platform/fe330000.sdhci/by-name/cache 0
8 /metadata ext4 /dev/block/platform/fe330000.sdhci/by-name/metadata 0
9 /data f2fs /dev/block/platform/fe330000.sdhci/by-name/userdata 0
10 /cust ext4 /dev/block/platform/fe330000.sdhci/by-name/cust 0
11 /custom ext4 /dev/block/platform/fe330000.sdhci/by-name/custom 0
12 /radical_update ext4 /dev/block/platform/fe330000.sdhci/by-name/radical_update 0
13 /misc emmc /dev/block/platform/fe330000.sdhci/by-name/misc 0
14 /uboot emmc /dev/block/platform/fe330000.sdhci/by-name/uboot 0
15 /charge emmc /dev/block/platform/fe330000.sdhci/by-name/charge 0
16 /resource emmc /dev/block/platform/fe330000.sdhci/by-name/resource 0
17 /parameter emmc /dev/block/platform/fe330000.sdhci/by-name/parameter 0
18 /boot emmc /dev/block/platform/fe330000.sdhci/by-name/boot 0
19 /recovery emmc /dev/block/platform/fe330000.sdhci/by-name/recovery 0
20 /backup emmc /dev/block/platform/fe330000.sdhci/by-name/backup 0
21 /trust emmc /dev/block/platform/fe330000.sdhci/by-name/trust 0
22 /baseparamer emmc /dev/block/platform/fe330000.sdhci/by-name/baseparamer 0
23 /frp emmc /dev/block/platform/fe330000.sdhci/by-name/frp 0
24 /tmp ramdisk ramdisk 0
emmc_point is /dev/block/mmcblk1
sd_point is (null)
sd_point_2 is (null)
read cmdline
I:Boot command: boot-recovery
I:Got 2 arguments from boot message
locale is [en_US]
stage is []
reason is [(null)]
W:Failed to read max brightness: No such file or directory
I:Screensaver disabled
[ 47.012903] init: property_set("ro.boottime.recovery", "47009234281") failed: property already set
[ 47.290449] init: Service 'recovery' (pid 223) killed by signal 11
[ 47.290512] init: Sending signal 9 to service 'recovery' (pid 223) process group...
[ 47.290719] init: Successfully killed process cgroup uid 0 pid 223 in 0ms
----------- 请解决系统启动进入recovery 模式的情况。-----------
----------- 添加的dsi1 配置如下 -----------
&pwm1 {
status = "okay";
};
&dsi{
status = "disabled";
};
&dsi1{
status = "okay";
dsi_panel: panel {
compatible ="simple-panel-dsi";
reg = <0>;
//mipi接口不上电，只传指令操控外部的mipi设备，实现代码注释
//ddc-i2c-bu
//power-supply = <&vcc_lcd>;
//pinctrl-0 = <&lcd_panel_reset &lcd_panel_enable>;
//backlight = <&backlight>;
enable-gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
//dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST /*| MIPI_DSI_MODE_VIDEO_SYNC_PULSE*/)>;
dsi,flags = <(MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |MIPI_DSI_MODE_LPM)>;
dsi,format = <MIPI_DSI_FMT_RGB888>;
dsi,lanes = <4>;
dsi,channel = <0>;
enable-delay-ms = <10>;
reset-delay-ms = <50>;
stb-delay-ms = <10>;
cs-delay-ms = <10>;
prepare-delay-ms = <50>;
init-delay-ms = <50>;
disable-delay-ms = <50>;
unprepare-delay-ms = <50>;
status = "okay";
//不需要发送指令实现上电序列配置 实现代码注释
/*
panel-init-sequence = [
];*/
panel-exit-sequence = [
05 05 01 28
05 78 01 10
];
disp_timings: display-timings {
native-mode = <&timing0>;
//compatible = "rockchip,display-timings";
timing0: timing0 {
//screen-type = <SCREEN_MIPI>;
//lvds-format = <LVDS_8BIT_2>;
//out-face = <OUT_P888>;
clock-frequency = <153000000>;// 120000000 153000000 130000000
hactive = <1080>;
vactive = <1920>;
hsync-len = <5>;
hback-porch = <24>;
hfront-porch = <8>;
vsync-len = <5>;
vback-porch = <7>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
};
};
disp_mipi_init: mipi_dsi_init{
compatible = "rockchip,mipi_dsi_init";
rockchip,screen_init = <0>;
rockchip,dsi_lane = <4>;
rockchip,dsi_hs_clk = <1200>;
rockchip,mipi_dsi_num = <1>;
};
disp_mipi_power_ctr: mipi_power_ctr {
compatible = "rockchip,mipi_power_ctr";
mipi_lcd_rst:mipi_lcd_rst{
compatible = "rockchip,lcd_rst";
rockchip,gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
rockchip,delay = <100>;
};
};
disp_mipi_init_cmds: screen-on-cmds {
compatible = "rockchip,screen-on-cmds";
rockchip,cmd_debug = <1>;
rockchip,on-cmds1 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x7A 0xC1>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds2 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x20 0x80>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds3 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x21 0x38>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds4 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x22 0x47>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds5 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x23 0x08>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds6 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x24 0x05>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds7 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x25 0x18>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds8 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x26 0x00>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds9 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x27 0x0C>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds10 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x28 0x05>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds11 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x29 0x07>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds12 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x34 0x80>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds13 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0xB5 0xA0>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds14 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x5C 0xFF>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds15 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x87 0x1F>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds16 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x2A 0x01>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds17 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x56 0x90>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds18 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x6B 0x51>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds19 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x69 0x10>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds20 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x10 0x40>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds21 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x11 0x88>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds22 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0xB6 0x20>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds23 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x51 0x20>;
rockchip,cmd_delay = <0>;
};
rockchip,on-cmds24 {
compatible = "rockchip,on-cmds";
rockchip,cmd_type = <0>;
rockchip,dsi_id = <0>;
rockchip,cmd = <0x5 0x09 0x10>;
rockchip,cmd_delay = <0>;
};
};
};
};
&hdmi_dp_sound {
status = "okay";
};
&route_hdmi {
status = "okay";
logo,mode = "center";
};
&cdn_dp {
status = "disabled";
extcon = <&fusb0>;
phys = <&tcphy0_dp>;
};
&hdmi_in_vopl {
status = "disabled";
};
&dp_in_vopb {
status = "disabled";
};
&wdt {
status = "disabled";
};
&i2c1 {
status = "okay";
rt5640: rt5640@1c {
#sound-dai-cells = <1>;
};
tc358749x: tc358749x@0f {
compatible = "toshiba,tc358749x";
#sound-dai-cells = <0>;
reg = <0x0f>;
power-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
reset-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
int-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&hdmiin_gpios>;
status = "okay";
};
};
&i2s0 {
status = "disabled";
};
&i2s2 {
status = "okay";
};
&vopb {
assigned-clocks = <&cru DCLK_VOP0_DIV>;
assigned-clock-parents = <&cru PLL_CPLL>; //BPLL/LPLL/DPLL/CPLL/GPLL/NPLL/VPLL/PPLL
};
&vopl {
assigned-clocks = <&cru DCLK_VOP1_DIV>;
assigned-clock-parents = <&cru PLL_VPLL>;
};
&route_dsi {
status = "disabled";
};
&dsi_in_vopb {
status = "disabled";
};
&dsi_in_vopl {
status = "disabled";
};
&route_dsi1 {
status = "okay";
logo,mode = "center";
};
&dsi1_in_vopb {
status = "disabled";
};
&dsi1_in_vopl {
status = "okay";
};
/* 注释内容在dts文件中配置好了
&pinctrl {
lcd-panel {
lcd_panel_reset: lcd-panel-reset {
rockchip,pins = <4 29 RK_FUNC_GPIO &pcfg_pull_down>;
};
lcd_panel_enable: lcd-panel-enable {
rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_down>;
};
};
sdmmc-pwrseq {
sdcard_enable_h: sdcard-enable-h {
rockchip,pins =
<1 20 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
pcie {
pcie_drv: pcie-drv {
rockchip,pins =
<0 13 RK_FUNC_GPIO &pcfg_pull_none>;
};
pcie_3g_drv: pcie-3g-drv {
rockchip,pins =
<2 6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
hdmiin {
hdmiin_gpios: hdmiin_gpios {
rockchip,pins =
<2 3 RK_FUNC_GPIO &pcfg_pull_none>,
<0 2 RK_FUNC_GPIO &pcfg_pull_none>,
<2 28 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
led_power: led-power {
rockchip,pins = <2 7 RK_FUNC_GPIO &pcfg_pull_none>;
};
led_user: led-user {
rockchip,pins = <2 2 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
*/
----------- 请解决系统启动进入recovery 模式的情况。-----------
注释掉这个dtsi文件的include 编译系统正常启动，启动log如上面的 init: Added '/init.environ.rc'
|
|
