Firefly开源社区

标题: ubuntu 无法识别摄像头 [打印本页]

作者: wyglily    时间: 2022-4-15 17:22
标题: ubuntu 无法识别摄像头
ubuntu 无法识别摄像头
log  是连接图


tchip_askquestions

camera_pic.txt

132.04 KB, 下载次数: 5, 下载积分: 灯泡 -1 , 经验 -1


作者: 板蓝根    时间: 2022-4-16 18:18
什么摄像头?usb?,如果是 usb 的话留意一下是生成 /dev/videox 哪个设备
作者: wyglily    时间: 2022-4-18 09:30
是这个型号:800W单目摄像头CAM-8MS1M MIPI摄像机8M传感人脸识别门禁考勤机
作者: 板蓝根    时间: 2022-4-18 10:04
gst-launch-1.0 v4l2src device=/dev/video0 !  queue !video/x-raw,format=NV12,width=1920,height=1080, framerate=30/1 ! videoconvert ! glimagesink 不能打开吗 (独立问题已建立帖子,只在此贴交流)
作者: wyglily    时间: 2022-4-18 10:19
3588板子上接线图是不是 三角号的脚与对应摄像头的01脚。

作者: wyglily    时间: 2022-4-18 10:31
firefly@firefly:~$ gst-launch-1.0 v4l2src device=/dev/video0 ! queue !video/x-raw,format=NV12,width=1920,heithg=1080,framerate=30/1 ! videoconvert ! glimagesink
bash: !video/x: event not found

作者: wyglily    时间: 2022-4-18 11:26
irefly@firefly:~$ gst-launch-1.0 v4l2src device=/dev/video0 ! queue ! video/x-raw,format=NV12,width=1920,heithg=1080,framerate=30/1 ! videoconvert ! glimagesink
Setting pipeline to PAUSED ...
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '5'.
ERROR: Pipeline doesn't want to pause.
Got context from element 'sink': gst.gl.GLDisplay=context, gst.gl.GLDisplay=(GstGLDisplay)"\(GstGLDisplayWayland\)\ gldisplaywayland0";
ERROR: from element /GstPipeline:pipeline0/GstV4l2Src:v4l2src0: Could not open device '/dev/video0' for reading and writing.
Additional debug info:
v4l2_calls.c(621): gst_v4l2_open (): /GstPipeline:pipeline0/GstV4l2Src:v4l2src0:
system error: No such device
Setting pipeline to NULL ...
Freeing pipeline ...

作者: wyglily    时间: 2022-4-18 13:54
heithg=1080 改成height=1080  ,使用root权限,同时 /dev/video0~video8都进行了验证。还是无法识别。
作者: 板蓝根    时间: 2022-4-18 14:40
我这边测试没有问题,mipi 摄像头接在背后的 mipi 接口(背后只有一个),附件 log 乱码,还有可以用android 测试一下
作者: wyglily    时间: 2022-4-18 16:40
如果工作正常,dmsg 会有什么信息打印出来?
作者: wyglily    时间: 2022-4-18 18:08
我从官网下载的android img  :ITX-3588J_Android12_HDMI_220416.7z 无法烧录,提示“设备类型不匹配,停止烧录”
作者: wyglily    时间: 2022-4-19 09:13
  1. root@firefly:~# dmesg
  2. [    1.547782] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  3. [    1.547808] Linux version 5.10.66 (daijh@tchip16) (kernel commit id: 2a41db3ecf77) (sdk version: rk3588_linux_release_20220401_v0.0.1c) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #4 SMP Sat Apr 2 13:50:24 CST 2022
  4. [    1.557858] Machine model: Firefly ITX-3588J HDMI(Linux)
  5. [    1.557936] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
  6. [    1.562690] printk: bootconsole [uart8250] enabled
  7. [    1.568520] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
  8. [    1.569688] Reserved memory: created CMA memory pool at 0x00000000ef800000, size 8 MiB
  9. [    1.570416] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
  10. [    1.571136] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
  11. [    1.571879] OF: reserved mem: initialized node hdmirx-trans@10000000, compatible id shared-dma-pool
  12. [    1.651556] Zone ranges:
  13. [    1.651801]   DMA      [mem 0x0000000000200000-0x00000000efffffff]
  14. [    1.652374]   DMA32    empty
  15. [    1.652644]   Normal   empty
  16. [    1.652913] Movable zone start for each node
  17. [    1.653306] Early memory node ranges
  18. [    1.653637]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
  19. [    1.654214]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
  20. [    1.654795] Initmem setup node 0 [mem 0x0000000000200000-0x00000000efffffff]
  21. [    1.655444] On node 0 totalpages: 978432
  22. [    1.655450]   DMA zone: 15352 pages used for memmap
  23. [    1.655454]   DMA zone: 0 pages reserved
  24. [    1.655459]   DMA zone: 978432 pages, LIFO batch:63
  25. [    1.676287] psci: probing for conduit method from DT.
  26. [    1.676760] psci: PSCIv1.1 detected in firmware.
  27. [    1.677186] psci: Using standard PSCI v0.2 function IDs
  28. [    1.677671] psci: Trusted OS migration not required
  29. [    1.678122] psci: SMC Calling Convention v1.2
  30. [    1.678916] percpu: Embedded 30 pages/cpu s85160 r8192 d29528 u122880
  31. [    1.679549] pcpu-alloc: s85160 r8192 d29528 u122880 alloc=30*4096
  32. [    1.679557] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  33. [    1.679704] Detected VIPT I-cache on CPU0
  34. [    1.680121] CPU features: detected: GIC system register CPU interface
  35. [    1.680714] CPU features: detected: Virtualization Host Extensions
  36. [    1.681288] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  37. [    1.681934] alternatives: patching kernel code
  38. [    1.682683] Built 1 zonelists, mobility grouping on.  Total pages: 963080
  39. [    1.683313] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  storagenode=/mmc@fe2e0000 androidboot.verifiedbootstate=orange ro rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
  40. [    1.687852] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  41. [    1.688812] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  42. [    1.689526] mem auto-init: stack:off, heap alloc:off, heap free:off
  43. [    1.729973] Memory: 3521412K/3913728K available (17150K kernel code, 3488K rwdata, 6436K rodata, 6784K init, 609K bss, 121980K reserved, 270336K cma-reserved)
  44. [    1.731426] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  45. [    1.732063] ftrace: allocating 64024 entries in 251 pages
  46. [    1.846486] ftrace: allocated 251 pages with 7 groups
  47. [    1.847272] rcu: Hierarchical RCU implementation.
  48. [    1.847711] rcu:     RCU event tracing is enabled.
  49. [    1.848130]  Rude variant of Tasks RCU enabled.
  50. [    1.848549] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
  51. [    1.855138] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  52. [    1.857853] GICv3: GIC: Using split EOI/Deactivate mode
  53. [    1.858339] GICv3: 480 SPIs implemented
  54. [    1.858694] GICv3: 0 Extended SPIs implemented
  55. [    1.859133] GICv3: Distributor has no Range Selector support
  56. [    1.859660] GICv3: 16 PPIs implemented
  57. [    1.860049] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
  58. [    1.860812] ITS [mem 0xfe640000-0xfe65ffff]
  59. [    1.861259] ITS@0x00000000fe640000: allocated 8192 Devices @2c00000 (indirect, esz 8, psz 64K, shr 0)
  60. [    1.862131] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @2c10000 (flat, esz 2, psz 64K, shr 0)
  61. [    1.863069] ITS: using cache flushing for cmd queue
  62. [    1.863553] ITS [mem 0xfe660000-0xfe67ffff]
  63. [    1.863987] ITS@0x00000000fe660000: allocated 8192 Devices @2c30000 (indirect, esz 8, psz 64K, shr 0)
  64. [    1.864858] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @2c40000 (flat, esz 2, psz 64K, shr 0)
  65. [    1.865795] ITS: using cache flushing for cmd queue
  66. [    1.866410] GICv3: using LPI property table @0x0000000002c50000
  67. [    1.867101] GIC: using cache flushing for LPI property table
  68. [    1.867628] GICv3: CPU0: using allocated LPI pending table @0x0000000002c60000
  69. [    1.868479] random: get_random_bytes called from start_kernel+0x3dc/0x5d0 with crng_init=0
  70. [    2.003533] rockchip_cpuclk_pre_rate_change: limiting alt-divider 36254 to 31
  71. [    2.008395] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  72. [    2.008969] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  73. [    2.009970] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  74. [    2.012271] Console: colour dummy device 80x25
  75. [    2.012718] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
  76. [    2.013674] pid_max: default: 32768 minimum: 301
  77. [    2.014310] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  78. [    2.015008] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  79. [    2.018088] rcu: Hierarchical SRCU implementation.
  80. [    2.019794] Platform MSI: msi-controller@fe640000 domain created
  81. [    2.020374] Platform MSI: msi-controller@fe660000 domain created
  82. [    2.021353] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
  83. [    2.022143] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
  84. [    2.023569] smp: Bringing up secondary CPUs ...
  85. [    2.025422] Detected VIPT I-cache on CPU1
  86. [    2.025467] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
  87. [    2.025490] GICv3: CPU1: using allocated LPI pending table @0x0000000002c70000
  88. [    2.025542] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  89. [    2.027135] Detected VIPT I-cache on CPU2
  90. [    2.027176] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
  91. [    2.027200] GICv3: CPU2: using allocated LPI pending table @0x0000000002c80000
  92. [    2.027250] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  93. [    2.028742] Detected VIPT I-cache on CPU3
  94. [    2.028782] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
  95. [    2.028804] GICv3: CPU3: using allocated LPI pending table @0x0000000002c90000
  96. [    2.028850] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  97. [    2.030348] CPU features: detected: Spectre-v4
  98. [    2.030352] Detected PIPT I-cache on CPU4
  99. [    2.030368] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
  100. [    2.030378] GICv3: CPU4: using allocated LPI pending table @0x0000000002ca0000
  101. [    2.030404] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
  102. [    2.031823] Detected PIPT I-cache on CPU5
  103. [    2.031840] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
  104. [    2.031851] GICv3: CPU5: using allocated LPI pending table @0x0000000002cb0000
  105. [    2.031877] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
  106. [    2.033326] Detected PIPT I-cache on CPU6
  107. [    2.033343] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
  108. [    2.033353] GICv3: CPU6: using allocated LPI pending table @0x0000000002cc0000
  109. [    2.033379] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
  110. [    2.034787] Detected PIPT I-cache on CPU7
  111. [    2.034803] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
  112. [    2.034814] GICv3: CPU7: using allocated LPI pending table @0x0000000002cd0000
  113. [    2.034840] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
  114. [    2.034929] smp: Brought up 1 node, 8 CPUs
  115. [    2.051729] SMP: Total of 8 processors activated.
  116. [    2.052168] CPU features: detected: Privileged Access Never
  117. [    2.052685] CPU features: detected: User Access Override
  118. [    2.053179] CPU features: detected: 32-bit EL0 Support
  119. [    2.053657] CPU features: detected: Common not Private translations
  120. [    2.054237] CPU features: detected: RAS Extension Support
  121. [    2.054751] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
  122. [    2.055548] CPU features: detected: CRC32 instructions
  123. [    2.056025] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  124. [    2.056673] CPU features: detected: RCpc load-acquire (LDAPR)
  125. [    2.057319] CPU: All CPU(s) started at EL2
  126. [    2.058824] devtmpfs: initialized
  127. [    2.069420] Registered cp15_barrier emulation handler
  128. [    2.069892] Registered setend emulation handler
  129. [    2.070388] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  130. [    2.071295] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  131. [    2.074645] pinctrl core: initialized pinctrl subsystem
  132. [    2.075276] regulator-dummy: no parameters, enabled
  133. [    2.075557] NET: Registered protocol family 16
  134. [    2.077169] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  135. [    2.077949] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  136. [    2.080082] thermal_sys: Registered thermal governor 'fair_share'
  137. [    2.080085] thermal_sys: Registered thermal governor 'step_wise'
  138. [    2.080942] cpuidle: using governor menu
  139. [    2.081860] Registered FIQ tty driver
  140. [    2.082475] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  141. [    2.083236] ASID allocator initialised with 65536 entries
  142. [    2.085220] printk: console [ramoops-1] enabled
  143. [    2.085649] pstore: Registered ramoops as persistent store backend
  144. [    2.086218] ramoops: using 0xf0000@0x110000, ecc: 0
  145. [    2.131282] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
  146. [    2.132123] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
  147. [    2.132930] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
  148. [    2.133768] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
  149. [    2.134605] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
  150. [    2.135234] rockchip-pinctrl pinctrl: probed pinctrl
  151. [    2.205092] raid6: neonx8   gen()  5481 MB/s
  152. [    2.261870] raid6: neonx8   xor()  4222 MB/s
  153. [    2.318655] raid6: neonx4   gen()  5495 MB/s
  154. [    2.375436] raid6: neonx4   xor()  4253 MB/s
  155. [    2.432220] raid6: neonx2   gen()  5169 MB/s
  156. [    2.489005] raid6: neonx2   xor()  4037 MB/s
  157. [    2.545790] raid6: neonx1   gen()  4464 MB/s
  158. [    2.602573] raid6: neonx1   xor()  3324 MB/s
  159. [    2.659357] raid6: int64x8  gen()  1302 MB/s
  160. [    2.716139] raid6: int64x8  xor()   841 MB/s
  161. [    2.772923] raid6: int64x4  gen()  1638 MB/s
  162. [    2.829709] raid6: int64x4  xor()   909 MB/s
  163. [    2.886497] raid6: int64x2  gen()  2416 MB/s
  164. [    2.943276] raid6: int64x2  xor()  1327 MB/s
  165. [    3.000064] raid6: int64x1  gen()  2001 MB/s
  166. [    3.056856] raid6: int64x1  xor()  1090 MB/s
  167. [    3.057252] raid6: using algorithm neonx4 gen() 5495 MB/s
  168. [    3.057748] raid6: .... xor() 4253 MB/s, rmw enabled
  169. [    3.058204] raid6: using neon recovery algorithm
  170. [    3.059188] fiq_debugger fiq_debugger.0: IRQ fiq not found
  171. [    3.059698] fiq_debugger fiq_debugger.0: IRQ wakeup not found
  172. [    3.060227] fiq_debugger_probe: could not install nmi irq handler
  173. [    3.060845] printk: console [ttyFIQ0] enabled
  174. [    3.061623] printk: bootconsole [uart8250] disabled
  175. [    3.062142] Registered fiq debugger ttyFIQ0
  176. [    3.062371] vcc12v_dcin: 12000 mV, enabled
  177. [    3.062456] reg-fixed-voltage vcc12v-dcin: vcc12v_dcin supplying 12000000uV
  178. [    3.062506] reg-fixed-voltage vcc5v0-sys: Looking up vin-supply from device tree
  179. [    3.062510] vcc5v0_sys: supplied by vcc12v_dcin
  180. [    3.062518] vcc12v_dcin: could not add device link regulator.2: -ENOENT
  181. [    3.062533] vcc5v0_sys: 5000 mV, enabled
  182. [    3.062591] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
  183. [    3.062638] reg-fixed-voltage vcc5v0-usbdcin: Looking up vin-supply from device tree
  184. [    3.062642] vcc5v0_usbdcin: supplied by vcc12v_dcin
  185. [    3.062649] vcc12v_dcin: could not add device link regulator.3: -ENOENT
  186. [    3.062668] vcc5v0_usbdcin: 5000 mV, enabled
  187. [    3.062725] reg-fixed-voltage vcc5v0-usbdcin: vcc5v0_usbdcin supplying 5000000uV
  188. [    3.062770] reg-fixed-voltage vcc5v0-usb: Looking up vin-supply from device tree
  189. [    3.062773] vcc5v0_usb: supplied by vcc5v0_usbdcin
  190. [    3.062779] vcc5v0_usbdcin: could not add device link regulator.4: -ENOENT
  191. [    3.062793] vcc5v0_usb: 5000 mV, enabled
  192. [    3.062856] reg-fixed-voltage vcc5v0-usb: vcc5v0_usb supplying 5000000uV
  193. [    3.062911] reg-fixed-voltage vcc-1v1-nldo-s3: Looking up vin-supply from device tree
  194. [    3.062914] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
  195. [    3.062920] vcc5v0_sys: could not add device link regulator.5: -ENOENT
  196. [    3.062933] vcc_1v1_nldo_s3: 1100 mV, enabled
  197. [    3.062995] reg-fixed-voltage vcc-1v1-nldo-s3: vcc_1v1_nldo_s3 supplying 1100000uV
  198. [    3.063054] vcc3v3_pcie30: 3300 mV, disabled
  199. [    3.063107] reg-fixed-voltage vcc3v3-pcie30: Looking up vin-supply from device tree
  200. [    3.063111] vcc3v3_pcie30: supplied by vcc12v_dcin
  201. [    3.063146] reg-fixed-voltage vcc3v3-pcie30: vcc3v3_pcie30 supplying 3300000uV
  202. [    3.063418] iommu: Default domain type: Translated
  203. [    3.063499] rk_iommu fdab9000.iommu: version = 2
  204. [    3.063830] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply from device tree
  205. [    3.063846] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vdpu-supply property in node /power-management@fd8d8000/power-controller failed
  206. [    3.063886] rk_iommu fdb50800.iommu: version = 2
  207. [    3.064085] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply from device tree
  208. [    3.064099] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga30-supply property in node /power-management@fd8d8000/power-controller failed
  209. [    3.064116] rk_iommu fdb60f00.iommu: version = 2
  210. [    3.064309] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply from device tree
  211. [    3.064324] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rga31-supply property in node /power-management@fd8d8000/power-controller failed
  212. [    3.064344] rk_iommu fdb70f00.iommu: version = 2
  213. [    3.064504] rk_iommu fdb90480.iommu: version = 2
  214. [    3.064683] rk_iommu fdba0800.iommu: version = 2
  215. [    3.064864] rk_iommu fdba4800.iommu: version = 2
  216. [    3.065045] rk_iommu fdba8800.iommu: version = 2
  217. [    3.065221] rk_iommu fdbac800.iommu: version = 2
  218. [    3.065399] rk_iommu fdbb0800.iommu: version = 2
  219. [    3.065537] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply from device tree
  220. [    3.065551] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc0-supply property in node /power-management@fd8d8000/power-controller failed
  221. [    3.065573] rk_iommu fdbdf000.iommu: version = 2
  222. [    3.065682] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply from device tree
  223. [    3.065696] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vcodec-supply property in node /power-management@fd8d8000/power-controller failed
  224. [    3.065769] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply from device tree
  225. [    3.065783] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up venc1-supply property in node /power-management@fd8d8000/power-controller failed
  226. [    3.065809] rk_iommu fdbef000.iommu: version = 2
  227. [    3.066013] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply from device tree
  228. [    3.066027] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec0-supply property in node /power-management@fd8d8000/power-controller failed
  229. [    3.066054] rk_iommu fdc38700.iommu: version = 2
  230. [    3.066268] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply from device tree
  231. [    3.066281] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up rkvdec1-supply property in node /power-management@fd8d8000/power-controller failed
  232. [    3.066306] rk_iommu fdc48700.iommu: version = 2
  233. [    3.066464] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply from device tree
  234. [    3.066478] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up vi-supply property in node /power-management@fd8d8000/power-controller failed
  235. [    3.066502] rk_iommu fdce0800.iommu: version = 2
  236. [    3.066624] rk_iommu fdd97e00.iommu: version = 2
  237. [    3.066960] SCSI subsystem initialized
  238. [    3.067030] usbcore: registered new interface driver usbfs
  239. [    3.067047] usbcore: registered new interface driver hub
  240. [    3.067062] usbcore: registered new device driver usb
  241. [    3.067100] mc: Linux media interface: v0.10
  242. [    3.067112] videodev: Linux video capture interface: v2.00
  243. [    3.067139] pps_core: LinuxPPS API ver. 1 registered
  244. [    3.067143] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  245. [    3.067150] PTP clock support registered
  246. [    3.067417] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
  247. [    3.067455] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
  248. [    3.068698] Advanced Linux Sound Architecture Driver Initialized.
  249. [    3.068904] Bluetooth: Core ver 2.22
  250. [    3.068920] NET: Registered protocol family 31
  251. [    3.068924] Bluetooth: HCI device and connection manager initialized
  252. [    3.068930] Bluetooth: HCI socket layer initialized
  253. [    3.068935] Bluetooth: L2CAP socket layer initialized
  254. [    3.068942] Bluetooth: SCO socket layer initialized
  255. [    3.070198] rockchip-cpuinfo cpuinfo: SoC            : 35880000
  256. [    3.070204] rockchip-cpuinfo cpuinfo: Serial         : 0796c824252261e5
  257. [    3.070678] clocksource: Switched to clocksource arch_sys_counter
  258. [    3.393124] NET: Registered protocol family 2
  259. [    3.393224] IP idents hash table entries: 65536 (order: 7, 524288 bytes, linear)
  260. [    3.394312] tcp_listen_portaddr_hash hash table entries: 2048 (order: 4, 81920 bytes, linear)
  261. [    3.394357] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  262. [    3.394547] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes, linear)
  263. [    3.394947] TCP: Hash tables configured (established 32768 bind 32768)
  264. [    3.395004] UDP hash table entries: 2048 (order: 5, 196608 bytes, linear)
  265. [    3.395088] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes, linear)
  266. [    3.395229] NET: Registered protocol family 1
  267. [    3.395611] RPC: Registered named UNIX socket transport module.
  268. [    3.395616] RPC: Registered udp transport module.
  269. [    3.395620] RPC: Registered tcp transport module.
  270. [    3.395623] RPC: Registered tcp NFSv4.1 backchannel transport module.
  271. [    3.396136] PCI: CLS 0 bytes, default 64
  272. [    3.396491] Trying to unpack rootfs image as initramfs...
  273. [    3.617864] Freeing initrd memory: 8988K
  274. [    3.618902] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  275. [    3.622370] Initialise system trusted keyrings
  276. [    3.622481] workingset: timestamp_bits=46 max_order=20 bucket_order=0
  277. [    3.624988] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  278. [    3.625321] NFS: Registering the id_resolver key type
  279. [    3.625332] Key type id_resolver registered
  280. [    3.625335] Key type id_legacy registered
  281. [    3.625353] ntfs: driver 2.1.32 [Flags: R/O].
  282. [    3.625418] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
  283. [    3.625491] fuse: init (API version 7.32)
  284. [    3.625635] SGI XFS with security attributes, no debug enabled
  285. [    3.647733] NET: Registered protocol family 38
  286. [    3.647743] xor: measuring software checksum speed
  287. [    3.649319]    8regs           :  6265 MB/sec
  288. [    3.650504]    32regs          :  8346 MB/sec
  289. [    3.651475]    arm64_neon      : 10260 MB/sec
  290. [    3.651480] xor: using function: arm64_neon (10260 MB/sec)
  291. [    3.651487] Key type asymmetric registered
  292. [    3.651492] Asymmetric key parser 'x509' registered
  293. [    3.651510] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
  294. [    3.651655] io scheduler mq-deadline registered
  295. [    3.651661] io scheduler kyber registered
  296. [    3.652234] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
  297. [    3.652479] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
  298. [    3.653812] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply from device tree
  299. [    3.653820] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up phy-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
  300. [    3.653865] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply from device tree
  301. [    3.653871] phy phy-fd5d0000.syscon:usb2-phy@0.0: Looking up vbus-supply property in node /syscon@fd5d0000/usb2-phy@0/otg-port failed
  302. [    3.655088] phy phy-fd5d8000.syscon:usb2-phy@8000.1: Looking up phy-supply from device tree
  303. [    3.655167] rockchip-usb2phy fd5d8000.syscon:usb2-phy@8000: failed to create phy
  304. [    3.655570] phy phy-fd5dc000.syscon:usb2-phy@c000.1: Looking up phy-supply from device tree
  305. [    3.655577] rockchip-usb2phy fd5dc000.syscon:usb2-phy@c000: failed to create phy
  306. [    3.656285] phy phy-fd5d4000.syscon:usb2-phy@4000.1: Looking up phy-supply from device tree
  307. [    3.656292] rockchip-usb2phy fd5d4000.syscon:usb2-phy@4000: failed to create phy
  308. [    3.657123] phy phy-fee00000.phy.1: Looking up phy-supply from device tree
  309. [    3.657129] phy phy-fee00000.phy.1: Looking up phy-supply property in node /phy@fee00000 failed
  310. [    3.657306] phy phy-fee10000.phy.2: Looking up phy-supply from device tree
  311. [    3.657311] phy phy-fee10000.phy.2: Looking up phy-supply property in node /phy@fee10000 failed
  312. [    3.658065] phy phy-fed60000.hdmiphy.3: Looking up phy-supply from device tree
  313. [    3.658071] phy phy-fed60000.hdmiphy.3: Looking up phy-supply property in node /hdmiphy@fed60000 failed
  314. [    3.658682] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
  315. [    3.658846] phy phy-fed70000.hdmiphy.4: Looking up phy-supply from device tree
  316. [    3.658852] phy phy-fed70000.hdmiphy.4: Looking up phy-supply property in node /hdmiphy@fed70000 failed
  317. [    3.659425] rockchip-hdptx-phy-hdmi fed70000.hdmiphy: hdptx phy init success
  318. [    3.659722] phy phy-fee80000.phy.5: Looking up phy-supply from device tree
  319. [    3.659728] phy phy-fee80000.phy.5: Looking up phy-supply property in node /phy@fee80000 failed
  320. [    3.660505] phy phy-fed80000.phy.6: Looking up phy-supply from device tree
  321. [    3.660512] phy phy-fed80000.phy.6: Looking up phy-supply property in node /phy@fed80000/dp-port failed
  322. [    3.660544] phy phy-fed80000.phy.7: Looking up phy-supply from device tree
  323. [    3.660549] phy phy-fed80000.phy.7: Looking up phy-supply property in node /phy@fed80000/u3-port failed
  324. [    3.662010] rk-pcie fe150000.pcie: Looking up vpcie3v3-supply from device tree
  325. [    3.662185] rk-pcie fe170000.pcie: Looking up vpcie3v3-supply from device tree
  326. [    3.662209] rk-pcie fe170000.pcie: Looking up vpcie3v3-supply property in node /pcie@fe170000 failed
  327. [    3.662226] rk-pcie fe170000.pcie: no vpcie3v3 regulator found
  328. [    3.662255] mpp_service mpp-srv: 0789ed832862 author: daijh 2022-03-19 firefly: add itx-rk3588j support
  329. [    3.662262] mpp_service mpp-srv: probe start
  330. [    3.662700] rk-pcie fe170000.pcie: missing legacy IRQ resource
  331. [    3.662728] rk-pcie fe170000.pcie: Missing *config* reg space
  332. [    3.662753] rk-pcie fe170000.pcie: host bridge /pcie@fe170000 ranges:
  333. [    3.662792] rk-pcie fe170000.pcie:      err 0x00f2000000..0x00f20fffff -> 0x00f2000000
  334. [    3.662822] rk-pcie fe170000.pcie:       IO 0x00f2100000..0x00f21fffff -> 0x00f2100000
  335. [    3.662854] rk-pcie fe170000.pcie:      MEM 0x00f2200000..0x00f2ffffff -> 0x00f2200000
  336. [    3.662878] rk-pcie fe170000.pcie:      MEM 0x0980000000..0x09bfffffff -> 0x0980000000
  337. [    3.662932] rk-pcie fe170000.pcie: Missing *config* reg space
  338. [    3.662979] rk-pcie fe170000.pcie: invalid resource
  339. [    3.664397] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
  340. [    3.664625] mpp_vdpu2 fdb50400.vdpu: probe device
  341. [    3.664874] mpp_vdpu2 fdb50400.vdpu: probing finish
  342. [    3.665074] mpp_vepu2 jpege-ccu: probing start
  343. [    3.665080] mpp_vepu2 jpege-ccu: probing finish
  344. [    3.665207] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
  345. [    3.665328] mpp_vepu2 fdba0000.jpege-core: probing start
  346. [    3.665449] mpp_vepu2 fdba0000.jpege-core: attach ccu success
  347. [    3.665578] mpp_vepu2 fdba0000.jpege-core: probing finish
  348. [    3.665657] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
  349. [    3.665773] mpp_vepu2 fdba4000.jpege-core: probing start
  350. [    3.665899] mpp_vepu2 fdba4000.jpege-core: attach ccu success
  351. [    3.666025] mpp_vepu2 fdba4000.jpege-core: probing finish
  352. [    3.666105] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
  353. [    3.666222] mpp_vepu2 fdba8000.jpege-core: probing start
  354. [    3.666344] mpp_vepu2 fdba8000.jpege-core: attach ccu success
  355. [    3.666483] mpp_vepu2 fdba8000.jpege-core: probing finish
  356. [    3.666555] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
  357. [    3.666672] mpp_vepu2 fdbac000.jpege-core: probing start
  358. [    3.666794] mpp_vepu2 fdbac000.jpege-core: attach ccu success
  359. [    3.666924] mpp_vepu2 fdbac000.jpege-core: probing finish
  360. [    3.667207] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
  361. [    3.667293] mpp-iep2 fdbb0000.iep: probe device
  362. [    3.667450] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
  363. [    3.667572] mpp-iep2 fdbb0000.iep: probing finish
  364. [    3.667777] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
  365. [    3.667923] mpp_jpgdec fdb90000.jpegd: probe device
  366. [    3.668156] mpp_jpgdec fdb90000.jpegd: probing finish
  367. [    3.668493] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
  368. [    3.668553] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
  369. [    3.668644] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
  370. [    3.668869] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
  371. [    3.668998] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
  372. [    3.669003] rkvdec2_init:687: No niu aclk reset resource define
  373. [    3.669008] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
  374. [    3.669012] rkvdec2_init:690: No niu hclk reset resource define
  375. [    3.669050] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
  376. [    3.669055] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
  377. [    3.669130] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000fd600000
  378. [    3.669134] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x0000000010000000
  379. [    3.669139] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 524288
  380. [    3.669143] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
  381. [    3.669149] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
  382. [    3.669181] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
  383. [    3.669266] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
  384. [    3.669461] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
  385. [    3.669589] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
  386. [    3.669594] rkvdec2_init:687: No niu aclk reset resource define
  387. [    3.669598] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
  388. [    3.669602] rkvdec2_init:690: No niu hclk reset resource define
  389. [    3.669640] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
  390. [    3.669665] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
  391. [    3.669732] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000fd680000
  392. [    3.669736] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x0000000010100000
  393. [    3.669741] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 524288
  394. [    3.669745] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
  395. [    3.669751] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
  396. [    3.669779] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
  397. [    3.669980] mpp_rkvenc2 rkvenc-ccu: probing start
  398. [    3.669986] mpp_rkvenc2 rkvenc-ccu: probing finish
  399. [    3.670109] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
  400. [    3.670264] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
  401. [    3.670282] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
  402. [    3.670429] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
  403. [    3.670561] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
  404. [    3.670633] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
  405. [    3.670826] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
  406. [    3.670844] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
  407. [    3.671015] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
  408. [    3.671145] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
  409. [    3.671290] mpp_service mpp-srv: probe success
  410. [    3.678653] rk-pcie fe150000.pcie: missing legacy IRQ resource
  411. [    3.678680] rk-pcie fe150000.pcie: Missing *config* reg space
  412. [    3.678707] rk-pcie fe150000.pcie: host bridge /pcie@fe150000 ranges:
  413. [    3.678745] rk-pcie fe150000.pcie:      err 0x00f0000000..0x00f00fffff -> 0x00f0000000
  414. [    3.678775] rk-pcie fe150000.pcie:       IO 0x00f0100000..0x00f01fffff -> 0x00f0100000
  415. [    3.678808] rk-pcie fe150000.pcie:      MEM 0x00f0200000..0x00f0ffffff -> 0x00f0200000
  416. [    3.678831] rk-pcie fe150000.pcie:      MEM 0x0900000000..0x093fffffff -> 0x0900000000
  417. [    3.678877] rk-pcie fe150000.pcie: Missing *config* reg space
  418. [    3.678925] rk-pcie fe150000.pcie: invalid resource
  419. [    3.679303] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
  420. [    3.679311] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  421. [    3.680101] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
  422. [    3.680108] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  423. [    3.680897] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
  424. [    3.680904] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
  425. [    3.682002] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
  426. [    3.682057] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
  427. [    3.682108] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
  428. [    3.682156] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
  429. [    3.682203] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
  430. [    3.682863] rockchip-system-monitor rockchip-system-monitor: system monitor probe
  431. [    3.683584] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
  432. [    3.683975] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 27, base_baud = 1500000) is a 16550A
  433. [    3.684318] feb40000.serial: ttyS1 at MMIO 0xfeb40000 (irq = 89, base_baud = 1500000) is a 16550A
  434. [    3.684570] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 90, base_baud = 1500000) is a 16550A
  435. [    3.685615] random: fast init done
  436. [    3.685667] random: crng init done
  437. [    3.686739] rockchip-vop2 fdd90000.vop: Adding to iommu group 15
  438. [    3.698508] brd: module loaded
  439. [    3.701277] loop: module loaded
  440. [    3.701445] zram: Added device: zram0
  441. [    3.701572] lkdtm: No crash points registered, enable through debugfs
  442. [    3.703303] rockchip-spi feb20000.spi: no high_speed pinctrl state
  443. [    3.704376] rk806 spi2.0: chip id: RK806,ver:0x2, 0x0
  444. [    3.704513] rk806 spi2.0: ON: 0x40 OFF:0x0
  445. [    3.706120] rk806-regulator rk806-regulator.3.auto: Looking up vcc1-supply from device tree
  446. [    3.706174] vdd_gpu_s0: supplied by vcc5v0_sys
  447. [    3.706183] vcc5v0_sys: could not add device link regulator.7: -ENOENT
  448. [    3.706334] vdd_gpu_s0: 550 <--> 950 mV at 750 mV, enabled
  449. [    3.706649] rk806-regulator rk806-regulator.3.auto: Looking up vcc2-supply from device tree
  450. [    3.706654] vdd_cpu_lit_s0: supplied by vcc5v0_sys
  451. [    3.706661] vcc5v0_sys: could not add device link regulator.8: -ENOENT
  452. [    3.706739] vdd_cpu_lit_s0: 550 <--> 950 mV at 750 mV, enabled
  453. [    3.706982] rk806-regulator rk806-regulator.3.auto: Looking up vcc3-supply from device tree
  454. [    3.706987] vdd_log_s0: supplied by vcc5v0_sys
  455. [    3.706993] vcc5v0_sys: could not add device link regulator.9: -ENOENT
  456. [    3.707070] vdd_log_s0: 750 mV, enabled
  457. [    3.707374] rk806-regulator rk806-regulator.3.auto: Looking up vcc4-supply from device tree
  458. [    3.707379] vdd_vdenc_s0: supplied by vcc5v0_sys
  459. [    3.707385] vcc5v0_sys: could not add device link regulator.10: -ENOENT
  460. [    3.707467] vdd_vdenc_s0: 550 <--> 950 mV at 750 mV, enabled
  461. [    3.707839] rk806-regulator rk806-regulator.3.auto: Looking up vcc5-supply from device tree
  462. [    3.707843] vdd_ddr_s0: supplied by vcc5v0_sys
  463. [    3.707849] vcc5v0_sys: could not add device link regulator.11: -ENOENT
  464. [    3.707989] vdd_ddr_s0: 850 mV, enabled
  465. [    3.708088] rk806-regulator rk806-regulator.3.auto: Looking up vcc6-supply from device tree
  466. [    3.708092] vdd2_ddr_s3: supplied by vcc5v0_sys
  467. [    3.708098] vcc5v0_sys: could not add device link regulator.12: -ENOENT
  468. [    3.708234] vdd2_ddr_s3: at 500 mV, enabled
  469. [    3.708525] rk806-regulator rk806-regulator.3.auto: Looking up vcc7-supply from device tree
  470. [    3.708529] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
  471. [    3.708535] vcc5v0_sys: could not add device link regulator.13: -ENOENT
  472. [    3.708612] vdd_2v0_pldo_s3: 2000 mV, enabled
  473. [    3.708786] rk806-regulator rk806-regulator.3.auto: Looking up vcc8-supply from device tree
  474. [    3.708791] vcc_3v3_s3: supplied by vcc5v0_sys
  475. [    3.708796] vcc5v0_sys: could not add device link regulator.14: -ENOENT
  476. [    3.708873] vcc_3v3_s3: 3300 mV, enabled
  477. [    3.709092] rk806-regulator rk806-regulator.3.auto: Looking up vcc9-supply from device tree
  478. [    3.709096] vddq_ddr_s0: supplied by vcc5v0_sys
  479. [    3.709102] vcc5v0_sys: could not add device link regulator.15: -ENOENT
  480. [    3.709298] vddq_ddr_s0: at 500 mV, enabled
  481. [    3.709590] rk806-regulator rk806-regulator.3.auto: Looking up vcc10-supply from device tree
  482. [    3.709594] vcc_1v8_s3: supplied by vcc5v0_sys
  483. [    3.709600] vcc5v0_sys: could not add device link regulator.16: -ENOENT
  484. [    3.709677] vcc_1v8_s3: 1800 mV, enabled
  485. [    3.709921] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
  486. [    3.709968] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
  487. [    3.709976] vcc_1v1_nldo_s3: could not add device link regulator.17: -ENOENT
  488. [    3.710122] vdd_0v75_s3: 750 mV, enabled
  489. [    3.710420] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
  490. [    3.710425] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
  491. [    3.710431] vcc_1v1_nldo_s3: could not add device link regulator.18: -ENOENT
  492. [    3.710508] vdd_ddr_pll_s0: 850 mV, enabled
  493. [    3.710745] rk806-regulator rk806-regulator.3.auto: Looking up vcc13-supply from device tree
  494. [    3.710750] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
  495. [    3.710756] vcc_1v1_nldo_s3: could not add device link regulator.19: -ENOENT
  496. [    3.710836] avdd_0v75_s0: 750 mV, enabled
  497. [    3.711060] rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
  498. [    3.711065] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
  499. [    3.711073] vcc_1v1_nldo_s3: could not add device link regulator.20: -ENOENT
  500. [    3.711154] vdd_0v85_s0: 850 mV, enabled
  501. [    3.711441] nldo5_s0: at 750 mV, enabled
  502. [    3.711502] rk806-regulator rk806-regulator.3.auto: Looking up vcc14-supply from device tree
  503. [    3.711507] nldo5_s0: supplied by vcc_1v1_nldo_s3
  504. [    3.711750] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
  505. [    3.711756] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
  506. [    3.711762] vdd_2v0_pldo_s3: could not add device link regulator.22: -ENOENT
  507. [    3.711908] avcc_1v8_s0: 1800 mV, enabled
  508. [    3.712194] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
  509. [    3.712200] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
  510. [    3.712206] vdd_2v0_pldo_s3: could not add device link regulator.23: -ENOENT
  511. [    3.712285] vcc_1v8_s0: 1800 mV, enabled
  512. [    3.712512] rk806-regulator rk806-regulator.3.auto: Looking up vcc11-supply from device tree
  513. [    3.712517] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
  514. [    3.712523] vdd_2v0_pldo_s3: could not add device link regulator.24: -ENOENT
  515. [    3.712599] avdd_1v2_s0: 1200 mV, enabled
  516. [    3.712826] rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
  517. [    3.712831] vcc_3v3_s0: supplied by vcc5v0_sys
  518. [    3.712837] vcc5v0_sys: could not add device link regulator.25: -ENOENT
  519. [    3.712913] vcc_3v3_s0: 3300 mV, enabled
  520. [    3.713141] rk806-regulator rk806-regulator.3.auto: Looking up vcc12-supply from device tree
  521. [    3.713145] vccio_sd_s0: supplied by vcc5v0_sys
  522. [    3.713151] vcc5v0_sys: could not add device link regulator.26: -ENOENT
  523. [    3.713228] vccio_sd_s0: 1800 <--> 3300 mV at 3300 mV, enabled
  524. [    3.713471] rk806-regulator rk806-regulator.3.auto: Looking up vcca-supply from device tree
  525. [    3.713475] pldo6_s3: supplied by vcc5v0_sys
  526. [    3.713481] vcc5v0_sys: could not add device link regulator.27: -ENOENT
  527. [    3.713558] pldo6_s3: 1800 mV, enabled
  528. [    3.713736] rk806 spi2.0: no sleep-setting state
  529. [    3.713741] rk806 spi2.0: no reset-setting pinctrl state
  530. [    3.713746] rk806 spi2.0: no dvs-setting pinctrl state
  531. [    3.715900] libphy: Fixed MDIO Bus: probed
  532. [    3.716001] CAN device driver interface
  533. [    3.717372] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
  534. [    3.717477] rk_gmac-dwmac fe1b0000.ethernet: Looking up phy-supply from device tree
  535. [    3.717486] rk_gmac-dwmac fe1b0000.ethernet: Looking up phy-supply property in node /ethernet@fe1b0000 failed
  536. [    3.717496] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
  537. [    3.717502] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
  538. [    3.717508] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x45).
  539. [    3.717512] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
  540. [    3.717517] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
  541. [    3.717538] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
  542. [    3.717544] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
  543. [    3.717550] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
  544. [    3.717562] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
  545. [    3.717777] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
  546. [    3.717917] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  547. [    3.717923] rk_gmac-dwmac fe1b0000.ethernet:         DWMAC4/5
  548. [    3.717929] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
  549. [    3.717933] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
  550. [    3.717937] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
  551. [    3.717941] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
  552. [    3.717969] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
  553. [    3.717973] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  554. [    3.717979] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
  555. [    3.717983] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
  556. [    3.717987] rk_gmac-dwmac fe1b0000.ethernet: SPH feature enabled
  557. [    3.717991] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
  558. [    3.735788] hwrng: no data available
  559. [    3.850699] libphy: stmmac: probed
  560. [    3.855972] rk_gmac-dwmac fe1c0000.ethernet: IRQ eth_lpi not found
  561. [    3.856087] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply from device tree
  562. [    3.856096] rk_gmac-dwmac fe1c0000.ethernet: Looking up phy-supply property in node /ethernet@fe1c0000 failed
  563. [    3.856105] rk_gmac-dwmac fe1c0000.ethernet: no regulator found
  564. [    3.856111] rk_gmac-dwmac fe1c0000.ethernet: clock input or output? (output).
  565. [    3.856116] rk_gmac-dwmac fe1c0000.ethernet: TX delay(0x42).
  566. [    3.856121] rk_gmac-dwmac fe1c0000.ethernet: Can not read property: rx_delay.
  567. [    3.856125] rk_gmac-dwmac fe1c0000.ethernet: set rx_delay to 0xffffffff
  568. [    3.856137] rk_gmac-dwmac fe1c0000.ethernet: integrated PHY? (no).
  569. [    3.856143] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_rx
  570. [    3.856148] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock mac_clk_tx
  571. [    3.856160] rk_gmac-dwmac fe1c0000.ethernet: cannot get clock clk_mac_speed
  572. [    3.856377] rk_gmac-dwmac fe1c0000.ethernet: init for RGMII_RXID
  573. [    3.856512] rk_gmac-dwmac fe1c0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
  574. [    3.856518] rk_gmac-dwmac fe1c0000.ethernet:         DWMAC4/5
  575. [    3.856523] rk_gmac-dwmac fe1c0000.ethernet: DMA HW capability register supported
  576. [    3.856527] rk_gmac-dwmac fe1c0000.ethernet: RX Checksum Offload Engine supported
  577. [    3.856531] rk_gmac-dwmac fe1c0000.ethernet: TX Checksum insertion supported
  578. [    3.856536] rk_gmac-dwmac fe1c0000.ethernet: Wake-Up On Lan supported
  579. [    3.856564] rk_gmac-dwmac fe1c0000.ethernet: TSO supported
  580. [    3.856569] rk_gmac-dwmac fe1c0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  581. [    3.856574] rk_gmac-dwmac fe1c0000.ethernet: Enabled Flow TC (entries=2)
  582. [    3.856578] rk_gmac-dwmac fe1c0000.ethernet: TSO feature enabled
  583. [    3.856582] rk_gmac-dwmac fe1c0000.ethernet: SPH feature enabled
  584. [    3.856587] rk_gmac-dwmac fe1c0000.ethernet: Using 32 bits DMA width
  585. [    3.868513] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
  586. [    3.888486] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
  587. [    3.894049] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
  588. [    3.914047] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
  589. [    3.920713] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
  590. [    3.940714] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
  591. [    3.947379] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
  592. [    3.967379] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
  593. [    3.974046] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
  594. [    3.987345] libphy: stmmac: probed
  595. [    3.991155] phy_rtl8211f_led_fixup in
  596. [    3.994042] rk-pcie fe150000.pcie: PCIe Linking... LTSSM is 0x0
  597. [    4.015560] usbcore: registered new interface driver rtl8150
  598. [    4.015641] usbcore: registered new interface driver r8152
  599. [    4.015699] usbcore: registered new interface driver asix
  600. [    4.015757] usbcore: registered new interface driver ax88179_178a
  601. [    4.015807] usbcore: registered new interface driver cdc_ether
  602. [    4.015856] usbcore: registered new interface driver net1080
  603. [    4.015905] usbcore: registered new interface driver cdc_subset
  604. [    4.015953] usbcore: registered new interface driver zaurus
  605. [    4.016025] usbcore: registered new interface driver cdc_ncm
  606. [    4.016082] usbcore: registered new interface driver qmi_wwan_q
  607. [    4.016133] usbcore: registered new interface driver qmi_wwan
  608. [    4.028110] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  609. [    4.028135] ehci-pci: EHCI PCI platform driver
  610. [    4.028160] ehci-platform: EHCI generic platform driver
  611. [    4.028374] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  612. [    4.028382] ohci-platform: OHCI generic platform driver
  613. [    4.029016] usbcore: registered new interface driver cdc_acm
  614. [    4.029020] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  615. [    4.029035] usbcore: registered new interface driver cdc_wdm
  616. [    4.029158] usbcore: registered new interface driver uas
  617. [    4.029182] usbcore: registered new interface driver usb-storage
  618. [    4.029218] usbcore: registered new interface driver usbserial_generic
  619. [    4.029229] usbserial: USB Serial support registered for generic
  620. [    4.029242] usbcore: registered new interface driver ch341
  621. [    4.029251] usbserial: USB Serial support registered for ch341-uart
  622. [    4.029266] usbcore: registered new interface driver cp210x
  623. [    4.029275] usbserial: USB Serial support registered for cp210x
  624. [    4.029287] usbcore: registered new interface driver ftdi_sio
  625. [    4.029296] usbserial: USB Serial support registered for FTDI USB Serial Device
  626. [    4.029309] usbcore: registered new interface driver keyspan
  627. [    4.029318] usbserial: USB Serial support registered for Keyspan - (without firmware)
  628. [    4.029327] usbserial: USB Serial support registered for Keyspan 1 port adapter
  629. [    4.029336] usbserial: USB Serial support registered for Keyspan 2 port adapter
  630. [    4.029345] usbserial: USB Serial support registered for Keyspan 4 port adapter
  631. [    4.029358] usbcore: registered new interface driver option
  632. [    4.029367] usbserial: USB Serial support registered for GSM modem (1-port)
  633. [    4.029380] usbcore: registered new interface driver oti6858
  634. [    4.029388] usbserial: USB Serial support registered for oti6858
  635. [    4.029400] usbcore: registered new interface driver pl2303
  636. [    4.029409] usbserial: USB Serial support registered for pl2303
  637. [    4.029421] usbcore: registered new interface driver qcserial
  638. [    4.029430] usbserial: USB Serial support registered for Qualcomm USB modem
  639. [    4.029442] usbcore: registered new interface driver sierra
  640. [    4.029452] usbserial: USB Serial support registered for Sierra USB modem
  641. [    4.029837] [HXTP] himax_hx83102_init
  642. [    4.029842] [HXTP] himax_hx83102_probe:Enter
  643. [    4.029845] [HXTP] Himax common touch panel driver init
  644. [    4.029889] usbcore: registered new interface driver usbtouchscreen
  645. [    4.030845] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.2.auto/input/input0
  646. [    4.031065] i2c /dev entries driver
  647. [    4.034513] rk860-regulator 0-0042: Looking up vin-supply from device tree
  648. [    4.034568] vdd_cpu_big0_s0: supplied by vcc5v0_sys
  649. [    4.034577] vcc5v0_sys: could not add device link regulator.28: -ENOENT
  650. [    4.038658] vdd_cpu_big0_s0: 550 <--> 1050 mV at 800 mV, enabled
  651. [    4.043114] rk860-regulator 0-0043: Looking up vin-supply from device tree
  652. [    4.043119] vdd_cpu_big1_s0: supplied by vcc5v0_sys
  653. [    4.043127] vcc5v0_sys: could not add device link regulator.29: -ENOENT
  654. [    4.047203] vdd_cpu_big1_s0: 550 <--> 1050 mV at 800 mV, enabled
  655. [    4.052105] rk860-regulator 1-0042: Looking up vin-supply from device tree
  656. [    4.052111] vdd_npu_s0: supplied by vcc5v0_sys
  657. [    4.052121] vcc5v0_sys: could not add device link regulator.30: -ENOENT
  658. [    4.056191] vdd_npu_s0: 550 <--> 950 mV at 800 mV, enabled
  659. [    4.061381] pca953x 6-0021: Looking up vcc-supply from device tree
  660. [    4.061399] pca953x 6-0021: Looking up vcc-supply property in node /i2c@fec80000/gpio@21 failed
  661. [    4.061433] pca953x 6-0021: supply vcc not found, using dummy regulator
  662. [    4.061607] pca953x 6-0021: using no AI
  663. [    4.066030] rtc-hym8563 6-0051: rtc information is valid
  664. [    4.071281] rtc-hym8563 6-0051: registered as rtc0
  665. [    4.072291] rtc-hym8563 6-0051: setting system clock to 2022-04-18T10:10:27 UTC (1650276627)
  666. [    4.075448] rkcifhw fdce0000.rkcif: Adding to iommu group 14
  667. [    4.075783] rkcif rkcif-mipi-lvds2: Adding to iommu group 14
  668. [    4.075798] rkcif rkcif-mipi-lvds2: rkcif driver version: v00.01.0a
  669. [    4.075835] rkcif rkcif-mipi-lvds2: attach to cif hw node
  670. [    4.075840] rkcif rkcif-mipi-lvds2: rkcif wait line 0
  671. [    4.075846] : terminal subdev does not exist
  672. [    4.075850] : terminal subdev does not exist
  673. [    4.075853] : terminal subdev does not exist
  674. [    4.075857] : terminal subdev does not exist
  675. [    4.075862] : get_remote_sensor: video pad[0] is null
  676. [    4.075866] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
  677. [    4.075870] : get_remote_sensor: video pad[0] is null
  678. [    4.075874] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
  679. [    4.075878] : get_remote_sensor: video pad[0] is null
  680. [    4.075882] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
  681. [    4.075886] : get_remote_sensor: video pad[0] is null
  682. [    4.075890] : rkcif_update_sensor_info: stream[0] get remote sensor_sd failed!
  683. [    4.077419] rkcif rkcif-mipi-lvds2: Entity type for entity rockchip-mipi-csi2 was not initialized!
  684. [    4.077426] rockchip-mipi-csi2: Async registered subdev
  685. [    4.077439] rockchip-mipi-csi2: probe success, v4l2_dev:rkcif-mipi-lvds2!
  686. [    4.078993] rk_hdmirx fdee0000.hdmirx-controller: assigned reserved memory node hdmirx-trans@10000000
  687. [    4.080264] rk_hdmirx fdee0000.hdmirx-controller: fdee0000.hdmirx-controller driver probe ok!
  688. [    4.080344] usbcore: registered new interface driver uvcvideo
  689. [    4.080348] USB Video Class driver (1.1.1)
  690. [    4.081513] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
  691. [    4.082004] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
  692. [    4.082413] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
  693. [    4.082613] Bluetooth: HCI UART driver ver 2.3
  694. [    4.082619] Bluetooth: HCI UART protocol H4 registered
  695. [    4.082623] Bluetooth: HCI UART protocol ATH3K registered
  696. [    4.082644] usbcore: registered new interface driver bfusb
  697. [    4.082661] usbcore: registered new interface driver btusb
  698. [    4.082755] cpu cpu0: Failed to get cpu_leakage
  699. [    4.082783] cpu cpu0: Looking up cpu-supply from device tree
  700. [    4.082863] cpu cpu0: Looking up mem-supply from device tree
  701. [    4.082939] cpu cpu4: Failed to get cpu_leakage
  702. [    4.082955] cpu cpu4: Looking up cpu-supply from device tree
  703. [    4.083468] cpu cpu4: Looking up mem-supply from device tree
  704. [    4.083989] cpu cpu6: Failed to get cpu_leakage
  705. [    4.084015] cpu cpu6: Looking up cpu-supply from device tree
  706. [    4.084521] cpu cpu6: Looking up mem-supply from device tree
  707. [    4.085538] cpu cpu0: avs=0
  708. [    4.086085] cpu cpu4: avs=0
  709. [    4.086643] cpu cpu6: avs=0
  710. [    4.086773] cpu cpu0: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 1 >= em_perf_state0
  711. [    4.086852] cpu cpu0: EM: created perf domain
  712. [    4.086898] cpu cpu0: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
  713. [    4.087200] cpu cpu4: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 1 >= em_perf_state0
  714. [    4.087304] cpu cpu4: EM: created perf domain
  715. [    4.087347] cpu cpu4: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
  716. [    4.096146] cpu cpu6: EM: hertz/watts ratio non-monotonically decreasing: em_perf_state 1 >= em_perf_state0
  717. [    4.096252] cpu cpu6: EM: created perf domain
  718. [    4.096297] cpu cpu6: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
  719. [    4.113329] sdhci: Secure Digital Host Controller Interface driver
  720. [    4.113338] sdhci: Copyright(c) Pierre Ossman
  721. [    4.113341] Synopsys Designware Multimedia Card Interface Driver
  722. [    4.113752] sdhci-pltfm: SDHCI platform and OF driver helper
  723. [    4.114194] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
  724. [    4.114214] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
  725. [    4.114224] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
  726. [    4.114258] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 77,32 bit host data width,256 deep fifo
  727. [    4.114333] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply from device tree
  728. [    4.114342] dwmmc_rockchip fe2c0000.mmc: Looking up vmmc-supply property in node /mmc@fe2c0000 failed
  729. [    4.114506] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply from device tree
  730. [    4.114512] sdhci-dwcmshc fe2e0000.mmc: Looking up vmmc-supply property in node /mmc@fe2e0000 failed
  731. [    4.115673] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
  732. [    4.115700] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
  733. [    4.116022] hid: raw HID events driver (C) Jiri Kosina
  734. [    4.116161] usbcore: registered new interface driver usbhid
  735. [    4.116165] usbhid: USB HID core driver
  736. [    4.117386] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply from device tree
  737. [    4.117397] dwmmc_rockchip fe2c0000.mmc: Looking up vqmmc-supply from device tree
  738. [    4.117405] sdhci-dwcmshc fe2e0000.mmc: Looking up vqmmc-supply property in node /mmc@fe2e0000 failed
  739. [    4.117948] rockchip-saradc fec10000.saradc: Looking up vref-supply from device tree
  740. [    4.125134] usbcore: registered new interface driver snd-usb-audio
  741. [    4.129559] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply from device tree
  742. [    4.129579] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up audio-supply property in node /power-management@fd8d8000/power-controller failed
  743. [    4.131902] debugfs: File 'Capture' in directory 'dapm' already present!
  744. [    4.132940] input: rockchip,dp0 rockchip,dp0 as /devices/platform/dp0-sound/sound/card0/input1
  745. [    4.134439] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  746. [    4.143109] ES8323 3-0011: ASoC: error at soc_component_write_no_lock on ES8323.3-0011: -5
  747. [    4.148397] mmc1: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
  748. [    4.179514] mmc1: new HS400 Enhanced strobe MMC card at address 0001
  749. [    4.180001] mmcblk1: mmc1:0001 TX2932 29.1 GiB
  750. [    4.180148] mmcblk1boot0: mmc1:0001 TX2932 partition 1 4.00 MiB
  751. [    4.180299] mmcblk1boot1: mmc1:0001 TX2932 partition 2 4.00 MiB
  752. [    4.180426] mmcblk1rpmb: mmc1:0001 TX2932 partition 3 4.00 MiB, chardev (237:0)
  753. [    4.182649]  mmcblk1: p1 p2 p3 p4 p5 p6 p7
  754. [    4.191017] input: rockchip-es8388 Headset as /devices/platform/es8388-sound/sound/card1/input2
  755. [    4.193138] IPVS: Registered protocols (TCP, UDP)
  756. [    4.193260] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  757. [    4.193535] IPVS: ipvs loaded.
  758. [    4.193553] IPVS: [rr] scheduler registered.
  759. [    4.194240] Initializing XFRM netlink socket
  760. [    4.195014] NET: Registered protocol family 10
  761. [    4.196618] Segment Routing with IPv6
  762. [    4.196830] NET: Registered protocol family 17
  763. [    4.196864] NET: Registered protocol family 15
  764. [    4.196978] Bridge firewalling registered
  765. [    4.196992] can: controller area network core
  766. [    4.197063] NET: Registered protocol family 29
  767. [    4.197077] can: raw protocol
  768. [    4.197092] can: broadcast manager protocol
  769. [    4.197113] can: netlink gateway - max_hops=1
  770. [    4.197668] Bluetooth: RFCOMM socket layer initialized
  771. [    4.197770] Bluetooth: RFCOMM ver 1.11
  772. [    4.197794] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  773. [    4.197813] Bluetooth: HIDP socket layer initialized
  774. [    4.197889] [BT_RFKILL]: Enter rfkill_rk_init
  775. [    4.197902] [WLAN_RFKILL]: Enter rfkill_wlan_init
  776. [    4.198849] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  777. [    4.198902] [WLAN_RFKILL]: can't find rockchip,grf property
  778. [    4.198918] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6275p
  779. [    4.198932] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  780. [    4.198946] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  781. [    4.199050] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,poweren_gpio = 20 flags = 0.
  782. [    4.199109] [WLAN_RFKILL]: wlan_platdata_parse_dt: WIFI,host_wake_irq = 10, flags = 0.
  783. [    4.199128] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  784. [    4.199141] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  785. [    4.199156] [WLAN_RFKILL]: rfkill_set_wifi_bt_power: 1
  786. [    4.199170] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  787. [    4.200532] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 34.
  788. [    4.200657] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 22.
  789. [    4.200727] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 21.
  790. [    4.200760] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 0.
  791. [    4.201720] [BT_RFKILL]: Request irq for bt wakeup host
  792. [    4.201844] [BT_RFKILL]: ** disable irq
  793. [    4.202046] [BT_RFKILL]: bt_default device registered.
  794. [    4.202243] Key type dns_resolver registered
  795. [    4.204087] xc7160 3-001b: T-chip firefly camera driver version: 00.01.02
  796. [    4.204215] xc7160 3-001b: Failed to get power-gpios, maybe no use
  797. [    4.204306] xc7160 3-001b: Looking up avdd-supply from device tree
  798. [    4.204332] xc7160 3-001b: Looking up avdd-supply property in node /i2c@feab0000/XC7160b@1b failed
  799. [    4.204397] xc7160 3-001b: supply avdd not found, using dummy regulator
  800. [    4.204619] xc7160 3-001b: Looking up dovdd-supply from device tree
  801. [    4.204645] xc7160 3-001b: Looking up dovdd-supply property in node /i2c@feab0000/XC7160b@1b failed
  802. [    4.204730] xc7160 3-001b: supply dovdd not found, using dummy regulator
  803. [    4.204805] xc7160 3-001b: Looking up dvdd-supply from device tree
  804. [    4.204828] xc7160 3-001b: Looking up dvdd-supply property in node /i2c@feab0000/XC7160b@1b failed
  805. [    4.204854] xc7160 3-001b: supply dvdd not found, using dummy regulator
  806. [    4.204941] xc7160 3-001b: could not get default pinstate
  807. [    4.204957] xc7160 3-001b: could not get sleep pinstate
  808. [    4.204991] xc7160 3-001b: Success to get xc7160 endpoint data lanes, dts uses 4 lanes
  809. [    4.205007] xc7160 3-001b: xc7160 num data lanes is 4
  810. [    4.221375] xc7160 3-001b: isp chip is xc7160
  811. [    4.222080] rockchip-csi2-dphy csi2-dphy0: dphy0 matches m00_b_xc7160 3-001b:bus type 5
  812. [    4.223403] rkcif-mipi-lvds2: Async subdev notifier completed
  813. [    4.225644] Loading compiled-in X.509 certificates
  814. [    4.227395] vendor storage:20190527 ret = 0
  815. [    4.229972] Btrfs loaded, crc32c=crc32c-generic
  816. [    4.230436] pstore: Using crash dump compression: deflate
  817. [    4.231418] rga3_core0 fdb60000.rga: Adding to iommu group 2
  818. [    4.232090] rga: rga3_core0_irq, irq = 35, match scheduler
  819. [    4.232899] rga: Driver loaded successfully rga[3] ver:3.0.76831
  820. [    4.233042] rga: probe successfully
  821. [    4.234380] rga3_core1 fdb70000.rga: Adding to iommu group 3
  822. [    4.235040] rga: rga3_core1_irq, irq = 36, match scheduler
  823. [    4.235798] rga: Driver loaded successfully rga[3] ver:3.0.76831
  824. [    4.235936] rga: probe successfully
  825. [    4.237270] rga: rga2_irq, irq = 37, match scheduler
  826. [    4.238159] rga: Driver loaded successfully rga[3] ver:3.2.63318
  827. [    4.238291] rga: probe successfully
  828. [    4.239451] rga: Module initialized. v1.2.0
  829. [    4.253392] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply from device tree
  830. [    4.253468] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up usb-supply property in node /power-management@fd8d8000/power-controller failed
  831. [    4.282902] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply from device tree
  832. [    4.282979] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up gpu-supply property in node /power-management@fd8d8000/power-controller failed
  833. [    4.283077] mali fb000000.gpu: Kernel DDK version g10p0-01eac0
  834. [    4.283156] mali fb000000.gpu: Looking up mali-supply from device tree
  835. [    4.283338] reg-fixed-voltage vcc5v0-host: Looking up vin-supply from device tree
  836. [    4.283371] vcc5v0_host: supplied by vcc5v0_usb
  837. [    4.283411] vcc5v0_usb: could not add device link regulator.31: -ENOENT
  838. [    4.283490] mali fb000000.gpu: Looking up mem-supply from device tree
  839. [    4.283689] mali fb000000.gpu: Looking up mali-supply from device tree
  840. [    4.283730] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
  841. [    4.283740] vdd_gpu_s0: Failed to create debugfs directory
  842. [    4.283758] mali fb000000.gpu: Looking up mem-supply from device tree
  843. [    4.283791] vdd_gpu_s0: could not add device link fb000000.gpu: -EEXIST
  844. [    4.283800] vdd_gpu_s0: Failed to create debugfs directory
  845. [    4.283922] vcc5v0_host: 5000 mV, enabled
  846. [    4.284071] mali fb000000.gpu: Failed to get gpu_leakage
  847. [    4.284404] reg-fixed-voltage vcc5v0-host: vcc5v0_host supplying 5000000uV
  848. [    4.285574] reg-fixed-voltage vcc5v0-host3: Looking up vin-supply from device tree
  849. [    4.285601] vcc5v0_host3: supplied by vcc5v0_usb
  850. [    4.285675] vcc5v0_usb: could not add device link regulator.32: -ENOENT
  851. [    4.286396] mali fb000000.gpu: avs=0
  852. [    4.286631] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 132; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
  853. [    4.286924] vcc5v0_host3: 5000 mV, enabled
  854. [    4.287138] mali fb000000.gpu: r0p0 status 5 is unknown; treating as r0p0 status 0
  855. [    4.287168] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
  856. [    4.287256] reg-fixed-voltage vcc5v0-host3: vcc5v0_host3 supplying 5000000uV
  857. [    4.287323] mali fb000000.gpu: No priority control manager is configured
  858. [    4.287380] mali fb000000.gpu: No memory group manager is configured
  859. [    4.287449] mali fb000000.gpu: Protected memory allocator not available
  860. [    4.287601] reg-fixed-voltage pcie30-avdd1v8: Looking up vin-supply from device tree
  861. [    4.287705] pcie30_avdd1v8: supplied by avcc_1v8_s0
  862. [    4.287729] avcc_1v8_s0: could not add device link regulator.33: -ENOENT
  863. [    4.287796] pcie30_avdd1v8: 1800 mV, enabled
  864. [    4.288075] reg-fixed-voltage pcie30-avdd1v8: pcie30_avdd1v8 supplying 1800000uV
  865. [    4.288308] reg-fixed-voltage pcie30-avdd0v75: Looking up vin-supply from device tree
  866. [    4.288330] pcie30_avdd0v75: supplied by avdd_0v75_s0
  867. [    4.288352] avdd_0v75_s0: could not add device link regulator.34: -ENOENT
  868. [    4.288406] pcie30_avdd0v75: 750 mV, enabled
  869. [    4.288649] reg-fixed-voltage pcie30-avdd0v75: pcie30_avdd0v75 supplying 750000uV
  870. [    4.288789] mali fb000000.gpu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
  871. [    4.289989] vcc_hub_reset: no parameters, enabled
  872. [    4.290030] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
  873. [    4.290059] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
  874. [    4.290409] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
  875. [    4.290569] reg-fixed-voltage vcc-hub-reset-regulator: vcc_hub_reset supplying 0uV
  876. [    4.290791] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
  877. [    4.291142] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
  878. [    4.295080] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
  879. [    4.295490] vcc_hub3_reset: no parameters, enabled
  880. [    4.295520] mali fb000000.gpu: Probed as mali0
  881. [    4.295790] reg-fixed-voltage vcc-hub3-reset-regulator: vcc_hub3_reset supplying 0uV
  882. [    4.297636] vcc_sata_pwr_en: no parameters, enabled
  883. [    4.297735] reg-fixed-voltage vcc-sata-pwr-en-regulator: vcc_sata_pwr_en supplying 0uV
  884. [    4.298864] vcc_fan_pwr_en: no parameters, enabled
  885. [    4.298969] reg-fixed-voltage vcc-fan-pwr-en-regulator: vcc_fan_pwr_en supplying 0uV
  886. [    4.299749] vbus5v0_typec_pwr_en: no parameters, disabled
  887. [    4.299844] reg-fixed-voltage vbus5v0-typec-pwr-en-regulator: vbus5v0_typec_pwr_en supplying 0uV
  888. [    4.300979] vcc_sdcard_pwr_en: no parameters, enabled
  889. [    4.301083] reg-fixed-voltage vcc-sdcard-pwr-en-regulator: vcc_sdcard_pwr_en supplying 0uV
  890. [    4.301788] phy phy-fd5d8000.syscon:usb2-phy@8000.8: Looking up phy-supply from device tree
  891. [    4.301880] vcc5v0_host: could not add device link phy-fd5d8000.syscon:usb2-phy@8000.8: -ENOENT
  892. [    4.303455] phy phy-fd5dc000.syscon:usb2-phy@c000.9: Looking up phy-supply from device tree
  893. [    4.303470] vcc5v0_host: could not add device link phy-fd5dc000.syscon:usb2-phy@c000.9: -ENOENT
  894. [    4.304026] rk-pcie fe170000.pcie: PCIe Link up, LTSSM is 0x30011
  895. [    4.304142] rk-pcie fe170000.pcie: PCI host bridge to bus 0002:20
  896. [    4.304153] pci_bus 0002:20: root bus resource [bus 20-2f]
  897. [    4.304161] pci_bus 0002:20: root bus resource [??? 0xf2000000-0xf20fffff flags 0x0]
  898. [    4.304169] pci_bus 0002:20: root bus resource [io  0x0000-0xfffff] (bus address [0xf2100000-0xf21fffff])
  899. [    4.304177] pci_bus 0002:20: root bus resource [mem 0xf2200000-0xf2ffffff]
  900. [    4.304184] pci_bus 0002:20: root bus resource [mem 0x980000000-0x9bfffffff pref]
  901. [    4.304216] pci 0002:20:00.0: [1d87:3588] type 01 class 0x060400
  902. [    4.304239] pci 0002:20:00.0: reg 0x38: [mem 0x00000000-0x0000ffff pref]
  903. [    4.304297] pci 0002:20:00.0: supports D1 D2
  904. [    4.304303] pci 0002:20:00.0: PME# supported from D0 D1 D3hot
  905. [    4.308751] pci 0002:20:00.0: Primary bus is hard wired to 0
  906. [    4.308760] pci 0002:20:00.0: bridge configuration invalid ([bus 01-ff]), reconfiguring
  907. [    4.308977] pci 0002:21:00.0: [14e4:449d] type 00 class 0x028000
  908. [    4.309083] pci 0002:21:00.0: reg 0x10: [mem 0x00000000-0x0000ffff 64bit]
  909. [    4.309147] pci 0002:21:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
  910. [    4.309780] pci 0002:21:00.0: supports D1 D2
  911. [    4.309787] pci 0002:21:00.0: PME# supported from D0 D1 D2 D3hot D3cold
  912. [    4.311174] phy phy-fd5d4000.syscon:usb2-phy@4000.10: Looking up phy-supply from device tree
  913. [    4.311214] vcc5v0_host: could not add device link phy-fd5d4000.syscon:usb2-phy@4000.10: -ENOENT
  914. [    4.311477] phy phy-fd5d4000.syscon:usb2-phy@4000.10: Looking up vbus-supply from device tree
  915. [    4.311501] phy phy-fd5d4000.syscon:usb2-phy@4000.10: Looking up vbus-supply property in node /syscon@fd5d4000/usb2-phy@4000/otg-port failed
  916. [    4.316349] phy phy-fed90000.phy.11: Looking up phy-supply from device tree
  917. [    4.316374] phy phy-fed90000.phy.11: Looking up phy-supply property in node /phy@fed90000/dp-port failed
  918. [    4.316521] phy phy-fed90000.phy.12: Looking up phy-supply from device tree
  919. [    4.316540] phy phy-fed90000.phy.12: Looking up phy-supply property in node /phy@fed90000/u3-port failed
  920. [    4.330021] pci_bus 0002:21: busn_res: [bus 21-2f] end is updated to 21
  921. [    4.330223] pci 0002:20:00.0: BAR 8: assigned [mem 0xf2200000-0xf27fffff]
  922. [    4.330233] pci 0002:20:00.0: BAR 6: assigned [mem 0xf2800000-0xf280ffff pref]
  923. [    4.330244] pci 0002:21:00.0: BAR 2: assigned [mem 0xf2400000-0xf27fffff 64bit]
  924. [    4.330298] pci 0002:21:00.0: BAR 0: assigned [mem 0xf2200000-0xf220ffff 64bit]
  925. [    4.330354] pci 0002:20:00.0: PCI bridge to [bus 21]
  926. [    4.330363] pci 0002:20:00.0:   bridge window [mem 0xf2200000-0xf27fffff]
  927. [    4.331314] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
  928. [    4.331329] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
  929. [    4.331348] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
  930. [    4.331358] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
  931. [    4.331594] [drm] failed to init overlay plane Cluster0-win1
  932. [    4.331631] [drm] failed to init overlay plane Cluster1-win1
  933. [    4.331665] [drm] failed to init overlay plane Cluster2-win1
  934. [    4.331702] [drm] failed to init overlay plane Cluster3-win1
  935. [    4.332200] pcieport 0002:20:00.0: PME: Signaling with IRQ 145
  936. [    4.352191] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc0111da960)
  937. [    4.353268] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
  938. [    4.353521] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc0111e2640)
  939. [    4.354171] dwhdmi-rockchip fdea0000.hdmi: registered ddc I2C bus driver
  940. [    4.354392] rockchip-drm display-subsystem: bound fdea0000.hdmi (ops 0xffffffc0111e2640)
  941. [    4.354449] rockchip-drm display-subsystem: bound fde50000.dp (ops 0xffffffc0111e4800)
  942. [    4.354483] rockchip-drm display-subsystem: bound fde60000.dp (ops 0xffffffc0111e4800)
  943. [    4.354925] rockchip-drm display-subsystem: connector[HDMI-A-1] can't found any modes
  944. [    4.456605] rockchip-usbdp-phy fed90000.phy: cmn ana lcpll lock timeout
  945. [    4.456663] rockchip-usbdp-phy fed90000.phy: failed to init combophy
  946. [    4.456708] phy phy-fed90000.phy.11: phy poweron failed --> -110
  947. [    4.456745] rockchip-drm display-subsystem: connector[DP-2] can't found any modes
  948. [    4.456994] rockchip-drm display-subsystem: connector[HDMI-A-2] can't found any modes
  949. [    4.457026] rockchip-drm display-subsystem: can't not find any logo display
  950. [    4.457062] rockchip-drm display-subsystem: failed to show kernel logo
  951. [    4.457180] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
  952. [    4.459768] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
  953. [    4.467933] phy phy-fd5d4000.syscon:usb2-phy@4000.10: illegal mode
  954. [    4.468011] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
  955. [    4.468398] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 1
  956. [    4.468663] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  957. [    4.468771] xhci-hcd xhci-hcd.11.auto: irq 130, io mem 0xfc400000
  958. [    4.469395] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  959. [    4.469428] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  960. [    4.469452] usb usb1: Product: xHCI Host Controller
  961. [    4.469476] usb usb1: Manufacturer: Linux 5.10.66 xhci-hcd
  962. [    4.469498] usb usb1: SerialNumber: xhci-hcd.11.auto
  963. [    4.470530] hub 1-0:1.0: USB hub found
  964. [    4.470610] hub 1-0:1.0: 1 port detected
  965. [    4.471394] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
  966. [    4.471748] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 2
  967. [    4.471792] xhci-hcd xhci-hcd.11.auto: Host supports USB 3.0 SuperSpeed
  968. [    4.471936] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  969. [    4.472185] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
  970. [    4.472214] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  971. [    4.472237] usb usb2: Product: xHCI Host Controller
  972. [    4.472260] usb usb2: Manufacturer: Linux 5.10.66 xhci-hcd
  973. [    4.472282] usb usb2: SerialNumber: xhci-hcd.11.auto
  974. [    4.473247] hub 2-0:1.0: USB hub found
  975. [    4.473323] hub 2-0:1.0: 1 port detected
  976. [    4.475108] input: adc-keys as /devices/platform/adc-keys/input/input3
  977. [    4.476148] typec_fusb302 6-0022: Looking up vbus-supply from device tree
  978. [    4.499511] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card3/input4
  979. [    4.503785] input: rockchip-hdmi1 rockchip-hdmi1 as /devices/platform/hdmi1-sound/sound/card4/input5
  980. [    4.509436] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
  981. [    4.509828] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 3
  982. [    4.510055] ohci-platform fc8c0000.usb: irq 22, io mem 0xfc8c0000
  983. [    4.568405] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
  984. [    4.568459] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  985. [    4.568484] usb usb3: Product: Generic Platform OHCI controller
  986. [    4.568508] usb usb3: Manufacturer: Linux 5.10.66 ohci_hcd
  987. [    4.568531] usb usb3: SerialNumber: fc8c0000.usb
  988. [    4.569661] hub 3-0:1.0: USB hub found
  989. [    4.569778] hub 3-0:1.0: 1 port detected
  990. [    4.571632] ehci-platform fc880000.usb: EHCI Host Controller
  991. [    4.572087] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 4
  992. [    4.572335] ehci-platform fc880000.usb: irq 21, io mem 0xfc880000
  993. [    4.584098] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
  994. [    4.584502] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  995. [    4.584533] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  996. [    4.584558] usb usb4: Product: EHCI Host Controller
  997. [    4.584581] usb usb4: Manufacturer: Linux 5.10.66 ehci_hcd
  998. [    4.584603] usb usb4: SerialNumber: fc880000.usb
  999. [    4.585615] hub 4-0:1.0: USB hub found
  1000. [    4.585693] hub 4-0:1.0: 1 port detected
  1001. [    4.589864] ohci-platform fc840000.usb: Generic Platform OHCI controller
  1002. [    4.590365] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 5
  1003. [    4.590562] ohci-platform fc840000.usb: irq 20, io mem 0xfc840000
  1004. [    4.648436] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
  1005. [    4.648500] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1006. [    4.648525] usb usb5: Product: Generic Platform OHCI controller
  1007. [    4.648549] usb usb5: Manufacturer: Linux 5.10.66 ohci_hcd
  1008. [    4.648571] usb usb5: SerialNumber: fc840000.usb
  1009. [    4.649569] hub 5-0:1.0: USB hub found
  1010. [    4.649645] hub 5-0:1.0: 1 port detected
  1011. [    4.651404] ehci-platform fc800000.usb: EHCI Host Controller
  1012. [    4.651804] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 6
  1013. [    4.652042] ehci-platform fc800000.usb: irq 19, io mem 0xfc800000
  1014. [    4.720772] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  1015. [    4.734106] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
  1016. [    4.734629] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
  1017. [    4.734661] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  1018. [    4.734685] usb usb6: Product: EHCI Host Controller
  1019. [    4.734708] usb usb6: Manufacturer: Linux 5.10.66 ehci_hcd
  1020. [    4.734730] usb usb6: SerialNumber: fc800000.usb
  1021. [    4.735736] hub 6-0:1.0: USB hub found
  1022. [    4.735814] hub 6-0:1.0: 1 port detected
  1023. [    4.737588] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply from device tree
  1024. [    4.737697] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up sdio-supply property in node /power-management@fd8d8000/power-controller failed
  1025. [    4.737868] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply from device tree
  1026. [    4.737950] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu-supply property in node /power-management@fd8d8000/power-controller failed
  1027. [    4.740504] [dhd] _dhd_module_init: in Dongle Host Driver, version 101.10.361.11 (wlan=r892223-20210630-1)
  1028.                drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd compiled on Apr  1 2022 at 10:26:45

  1029. [    4.740528] [dhd] ======== dhd_wlan_init_plat_data ========
  1030. [    4.740539] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
  1031. [    4.740618] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=147, oob_irq_flags=0x411
  1032. [    4.740628] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
  1033. [    4.740636] [dhd] dhd_wifi_platform_load: Enter
  1034. [    4.740642] rkcif rkcif-mipi-lvds2: clear unready subdev num: 0
  1035. [    4.740864] [dhd] dhdpcie_pci_probe : no mutex held. set lock
  1036. [    4.740878] [dhd] PCI_PROBE:  bus 21, slot 0,vendor 14E4, device 449D(good PCI location)
  1037. [    4.740890] [dhd] dhdpcie_init: found adapter info 'DHD generic adapter'
  1038. [    4.740972] pcieh 0002:21:00.0: enabling device (0000 -> 0002)
  1039. [    4.741259] RKNPU fdab0000.npu: Adding to iommu group 0
  1040. [    4.741385] [dhd] Disable CTO
  1041. [    4.741486] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
  1042. [    4.741557] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
  1043. [    4.742098] RKNPU fdab0000.npu: Looking up mem-supply from device tree
  1044. [    4.742137] [dhd] ******** Perform FLR ********
  1045. [    4.742587] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
  1046. [    4.742610] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
  1047. [    4.742621] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
  1048. [    4.742917] [drm] Initialized rknpu 0.6.4 20211227 for fdab0000.npu on minor 1
  1049. [    4.743257] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply from device tree
  1050. [    4.743276] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up nputop-supply property in node /power-management@fd8d8000/power-controller failed
  1051. [    4.743313] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply from device tree
  1052. [    4.743336] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu1-supply property in node /power-management@fd8d8000/power-controller failed
  1053. [    4.743362] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply from device tree
  1054. [    4.743377] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up npu2-supply property in node /power-management@fd8d8000/power-controller failed
  1055. [    4.743451] RKNPU fdab0000.npu: Looking up rknpu-supply from device tree
  1056. [    4.743467] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
  1057. [    4.743470] vdd_npu_s0: Failed to create debugfs directory
  1058. [    4.743924] RKNPU fdab0000.npu: Looking up mem-supply from device tree
  1059. [    4.743938] vdd_npu_s0: could not add device link fdab0000.npu: -EEXIST
  1060. [    4.743941] vdd_npu_s0: Failed to create debugfs directory
  1061. [    4.744461] RKNPU fdab0000.npu: Failed to get npu_leakage
  1062. [    4.744973] RKNPU fdab0000.npu: avs=0
  1063. [    4.745061] RKNPU fdab0000.npu: l=-2147483648 h=2147483647 hyst=0 l_limit=0 h_limit=0 h_table=0
  1064. [    4.757179] RKNPU fdab0000.npu: failed to find power_model node
  1065. [    4.757233] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
  1066. [    4.757257] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
  1067. [    4.758513] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  1068. [    4.766579] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  1069. [    4.767757] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  1070. [    4.767779] cfg80211: failed to load regulatory.db
  1071. [    4.768706] rockchip-pm rockchip-suspend: not set pwm-regulator-config
  1072. [    4.770821] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '10:26:23', on 'Apr  1 2022'.
  1073. [    4.771648] Mali:
  1074. [    4.771654] Mali device driver loaded
  1075. [    4.778022] ret 1024 0
  1076. [    4.778410] ALSA device list:
  1077. [    4.778496]   #0: rockchip,dp0
  1078. [    4.778517]   #1: rockchip-es8388
  1079. [    4.778535]   #2: rockchip,hdmiin
  1080. [    4.778554]   #3: rockchip-hdmi0
  1081. [    4.778571]   #4: rockchip-hdmi1
  1082. [    4.791824] Freeing unused kernel memory: 6784K
  1083. [    4.817571] [dhd] read_config: reg=0x88 read val=0xb080
  1084. [    4.817650] [dhd] read_config: reg=0x88 read val=0xb080
  1085. [    4.817719] [dhd] read_config: reg=0x88 read val=0xb080
  1086. [    4.817786] [dhd] read_config: reg=0x88 read val=0xb080
  1087. [    4.817854] [dhd] read_config: reg=0x88 read val=0xb080
  1088. [    4.817921] [dhd] read_config: reg=0x88 read val=0xb080
  1089. [    4.817990] [dhd] read_config: reg=0x88 read val=0xb080
  1090. [    4.818058] [dhd] read_config: reg=0x88 read val=0xb080
  1091. [    4.818126] [dhd] read_config: reg=0x88 read val=0xb080
  1092. [    4.818194] [dhd] read_config: reg=0x88 read val=0xb080
  1093. [    4.818261] [dhd] read_config: reg=0x88 read val=0xb080
  1094. [    4.818329] [dhd] read_config: reg=0x88 read val=0xb080
  1095. [    4.818396] [dhd] read_config: reg=0x88 read val=0xb080
  1096. [    4.818464] [dhd] read_config: reg=0x88 read val=0xb080
  1097. [    4.818531] [dhd] read_config: reg=0x88 read val=0xb080
  1098. [    4.818599] [dhd] read_config: reg=0x88 read val=0xb080
  1099. [    4.818667] [dhd] read_config: reg=0x88 read val=0xb080
  1100. [    4.818735] [dhd] read_config: reg=0x88 read val=0x8080
  1101. [    4.819255] [dhd] ******** FLR Succedeed ********
  1102. [    4.819564] [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
  1103. [    4.819571] [dhd] dhdpcie_bar1_window_switch_enab: bar1_switch_enab=0 ramstart=0x170000 ramend=0x2affff bar1_size=0x0
  1104. [    4.819622] [dhd] dhd_conf_set_chiprev : devid=0x449d, chip=0xaae8, chiprev=2, svid=0x14e4, ssid=0xaae8
  1105. [    4.820987] [dhd] dhd_pktid_map_init:2458: pktid_audit init succeeded 1025
  1106. [    4.821028] [dhd] dhd_pktid_map_init:2458: pktid_audit init succeeded 4097
  1107. [    4.821219] [dhd] dhd_pktid_map_init:2458: pktid_audit init succeeded 36865
  1108. [    4.822004] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1109. [    4.822012] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1110. [    4.822017] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1111. [    4.822021] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1112. [    4.822026] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1113. [    4.822383] [dhd] dhd_attach(): thread:dhd_watchdog_thread:f8 started
  1114. [    4.822394] [dhd] dhd_deferred_work_init: work queue initialized
  1115. [    4.822399] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 3
  1116. [    4.822409] [dhd] dhd_cpumasks_init CPU masks primary(big)=0x0 secondary(little)=0xfe
  1117. [    4.822737] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
  1118. [    4.822761] [dhd] dhdpcie_bus_attach: making DHD_BUS_DOWN
  1119. [    4.822781] [dhd] dhdpcie_init: rc_dev from dev->bus->self (1d87:3588) is 0000000047859425
  1120. [    4.822933] [dhd] dhdpcie_init: rc_ep_aspm_cap: 1 rc_ep_l1ss_cap: 1
  1121. [    4.822969] [dhd] dhdpcie_request_irq: INTx enabled
  1122. [    4.823032] [dhd] dhdpcie_bar1_window_switch_enab: bar1_switch_enab=0 ramstart=0x170000 ramend=0x2affff bar1_size=0x400000
  1123. [    4.823053] [dhd] Dongle Host Driver, version 101.10.361.11 (wlan=r892223-20210630-1)
  1124.                drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd compiled on Apr  1 2022 at 10:26:45

  1125. [    4.823923] [dhd] Register interface [wlan0]  MAC: 00:90:4c:50:dc:a7

  1126. [    4.824060] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 3 -> mode 0
  1127. [    4.824099] [dhd] dhd_rtt_deinit: ENTER
  1128. [    4.824113] [dhd] dhd_rtt_deinit: EXIT, err = 0
  1129. [    4.824115] Run /init as init process
  1130. [    4.824122]   with arguments:
  1131. [    4.824129] [dhd] dhd_bus_devreset: == Power OFF ==
  1132. [    4.824143]     /init
  1133. [    4.824146]   with environment:
  1134. [    4.824148]     HOME=/
  1135. [    4.824150]     TERM=linux
  1136. [    4.824154] [dhd] dhdpcie_oob_intr_unregister: irq is not registered
  1137. [    4.824161] [dhd] dhd_dpc_kill: tasklet disabled
  1138. [    4.824167]     storagemedia=emmc
  1139. [    4.824170]     storagenode=/mmc@fe2e0000
  1140. [    4.824172]     overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1
  1141. [    4.824175]     cgroup_enable=memory
  1142. [    4.837872] [dhd] dhd_bus_devreset:  WLAN OFF Done
  1143. [    4.837883] [dhd] wifi_platform_set_power = 0, delay: 0 msec
  1144. [    4.837889] [dhd] ======== PULL WL_REG_ON(-1) LOW! ========
  1145. [    4.837895] [WLAN_RFKILL]: rockchip_wifi_power: 0
  1146. [    4.837901] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
  1147. [    4.837906] wifi power off
  1148. [    4.860823] usb 4-1: new high-speed USB device number 2 using ehci-platform
  1149. [    4.880195] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=93.91
  1150. [    4.880258] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1151. [    4.880282] usb 1-1: Product: USB2.1 Hub
  1152. [    4.880304] usb 1-1: Manufacturer: GenesysLogic
  1153. [    4.920500] hub 1-1:1.0: USB hub found
  1154. [    4.920754] hub 1-1:1.0: 4 ports detected
  1155. [    4.944112] [WLAN_RFKILL]: wifi shut off power [GPIO20-0]
  1156. [    4.944168] [dhd] dhdpcie_pci_probe : the lock is released.
  1157. [    4.944445] [dhd] _dhd_module_init: Exit err=0
  1158. [    5.007830] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  1159. [    5.011501] usb 4-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.00
  1160. [    5.011510] usb 4-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  1161. [    5.011514] usb 4-1: Product: USB 2.0 Hub [MTT]
  1162. [    5.011809] hub 4-1:1.0: USB hub found
  1163. [    5.011874] hub 4-1:1.0: 4 ports detected
  1164. [    5.026907] usb 2-1: New USB device found, idVendor=05e3, idProduct=0620, bcdDevice=93.91
  1165. [    5.026933] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1166. [    5.026942] usb 2-1: Product: USB3.2 Hub
  1167. [    5.026950] usb 2-1: Manufacturer: GenesysLogic
  1168. [    5.048296] hub 2-1:1.0: USB hub found
  1169. [    5.048638] hub 2-1:1.0: 4 ports detected
  1170. [    5.157658] es8323_line1_line2_line2diff_switch:2
  1171. [    5.294030] usb 1-1.4: new low-speed USB device number 3 using xhci-hcd
  1172. [    5.412777] usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
  1173. [    5.412838] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  1174. [    5.412866] usb 1-1.4: Product: USB Keyboard
  1175. [    5.412890] usb 1-1.4: Manufacturer: SEM
  1176. [    5.501333] input: SEM USB Keyboard as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.11.auto/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A2C:2124.0001/input/input6
  1177. [    5.558538] hid-generic 0003:1A2C:2124.0001: input,hidraw0: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-xhci-hcd.11.auto-1.4/input0
  1178. [    5.564226] input: SEM USB Keyboard Consumer Control as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.11.auto/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:2124.0002/input/input7
  1179. [    5.621376] input: SEM USB Keyboard System Control as /devices/platform/usbdrd3_1/fc400000.usb/xhci-hcd.11.auto/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:2124.0002/input/input8
  1180. [    5.622157] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Device [SEM USB Keyboard] on usb-xhci-hcd.11.auto-1.4/input1
  1181. [    6.574090] rk-pcie fe150000.pcie: PCIe Link Fail
  1182. [    6.574166] rk-pcie fe150000.pcie: failed to initialize host
  1183. [    6.575250] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply from device tree
  1184. [    6.575360] rockchip-pm-domain fd8d8000.power-management:power-controller: Looking up pcie-supply property in node /power-management@fd8d8000/power-controller failed
  1185. [    7.032578] EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null)
  1186. [    7.260192] EXT4-fs (mmcblk1p7): recovery complete
  1187. [    7.260465] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Opts: (null)
  1188. [    7.385416] EXT4-fs (mmcblk1p3): recovery complete
  1189. [    7.385817] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
  1190. [    7.385866] ext4 filesystem being mounted at /root/boot supports timestamps until 2038 (0x7fffffff)
  1191. [    7.551884] systemd[1]: Failed to find module 'autofs4'
  1192. [    7.640590] systemd[1]: systemd 245.4-4ubuntu4.0firefly1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
  1193. [    7.641103] systemd[1]: Detected architecture arm64.
  1194. [    7.685183] systemd[1]: Set hostname to <firefly>.
  1195. [    7.686089] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1196. [    7.686171] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1197. [    7.975145] systemd[1]: system-modprobe.slice: unit configures an IP firewall, but the local system does not support BPF/cgroup firewalling.
  1198. [    7.975170] systemd[1]: (This warning is only shown for the first unit using IP firewalling.)
  1199. [    7.976204] systemd[1]: Created slice system-modprobe.slice.
  1200. [    7.977172] systemd[1]: Created slice system-serial\x2dgetty.slice.
  1201. [    7.978070] systemd[1]: Created slice User and Session Slice.
  1202. [    7.978641] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  1203. [    7.979413] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
  1204. [    7.979464] systemd[1]: Reached target User and Group Name Lookups.
  1205. [    7.979964] systemd[1]: Reached target Remote File Systems.
  1206. [    7.980490] systemd[1]: Reached target Slices.
  1207. [    7.980938] systemd[1]: Reached target Swap.
  1208. [    7.981523] systemd[1]: Listening on Syslog Socket.
  1209. [    7.982115] systemd[1]: Listening on initctl Compatibility Named Pipe.
  1210. [    7.994101] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
  1211. [    7.994306] systemd[1]: Listening on Journal Socket (/dev/log).
  1212. [    7.994934] systemd[1]: Listening on Journal Socket.
  1213. [    7.995539] systemd[1]: Listening on udev Control Socket.
  1214. [    7.996175] systemd[1]: Listening on udev Kernel Socket.
  1215. [    7.996857] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
  1216. [    7.998549] systemd[1]: Mounting POSIX Message Queue File System...
  1217. [    8.000694] systemd[1]: Mounting Kernel Debug File System...
  1218. [    8.002877] systemd[1]: Mounting Kernel Trace File System...
  1219. [    8.005722] systemd[1]: Starting Journal Service...
  1220. [    8.008088] systemd[1]: Starting Set the console keyboard layout...
  1221. [    8.008826] systemd[1]: Condition check resulted in Create list of static device nodes for the current kernel being skipped.
  1222. [    8.008921] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
  1223. [    8.010660] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
  1224. [    8.013540] systemd[1]: Starting Load Kernel Modules...
  1225. [    8.016073] systemd[1]: Starting Remount Root and Kernel File Systems...
  1226. [    8.018896] systemd[1]: Starting udev Coldplug all Devices...
  1227. [    8.022203] systemd[1]: Mounted Kernel Trace File System.
  1228. [    8.026140] systemd[1]: Mounted POSIX Message Queue File System.
  1229. [    8.027084] systemd[1]: Mounted Kernel Debug File System.
  1230. [    8.028575] systemd[1]: Finished Remount Root and Kernel File Systems.
  1231. [    8.044511] systemd[1]: Finished Load Kernel Modules.
  1232. [    8.046330] systemd[1]: Mounting FUSE Control File System...
  1233. [    8.047876] systemd[1]: Mounting Kernel Configuration File System...
  1234. [    8.049025] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
  1235. [    8.049095] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
  1236. [    8.050050] systemd[1]: Starting Load/Save Random Seed...
  1237. [    8.051423] systemd[1]: Starting Apply Kernel Variables...
  1238. [    8.052466] systemd[1]: Starting Create System Users...
  1239. [    8.054325] systemd[1]: Mounted FUSE Control File System.
  1240. [    8.055040] systemd[1]: Mounted Kernel Configuration File System.
  1241. [    8.065389] systemd[1]: Finished Create System Users.
  1242. [    8.068244] systemd[1]: Starting Create Static Device Nodes in /dev...
  1243. [    8.082044] systemd[1]: Finished Load/Save Random Seed.
  1244. [    8.100153] systemd[1]: Finished Apply Kernel Variables.
  1245. [    8.104663] systemd[1]: Finished Create Static Device Nodes in /dev.
  1246. [    8.105999] systemd[1]: Starting udev Kernel Device Manager...
  1247. [    8.110106] systemd[1]: Finished Set the console keyboard layout.
  1248. [    8.110377] systemd[1]: Reached target Local File Systems (Pre).
  1249. [    8.110829] systemd[1]: Reached target Local File Systems.
  1250. [    8.111386] systemd[1]: Condition check resulted in Load AppArmor profiles being skipped.
  1251. [    8.112422] systemd[1]: Starting Set console font and keymap...
  1252. [    8.113467] systemd[1]: Starting Tell Plymouth To Write Out Runtime Data...
  1253. [    8.113623] systemd[1]: Condition check resulted in Load AppArmor profiles managed internally by snapd being skipped.
  1254. [    8.113677] systemd[1]: Condition check resulted in Store a System Token in an EFI Variable being skipped.
  1255. [    8.113759] systemd[1]: Condition check resulted in Commit a transient machine-id on disk being skipped.
  1256. [    8.126159] systemd[1]: Finished Set console font and keymap.
  1257. [    8.131842] systemd[1]: plymouth-read-write.service: Succeeded.
  1258. [    8.132317] systemd[1]: Finished Tell Plymouth To Write Out Runtime Data.
  1259. [    8.144023] systemd[1]: Started Journal Service.
  1260. [    8.161149] systemd-journald[491]: Received client request to flush runtime journal.
  1261. [    8.165504] systemd-journald[491]: File /var/log/journal/634553a90ac84a93bd8f946cfc7ea9d8/system.journal corrupted or uncleanly shut down, renaming and replacing.
  1262. [    8.394626] libata version 3.00 loaded.
  1263. [    8.405125] ahci fe210000.sata: Looking up ahci-supply from device tree
  1264. [    8.405144] ahci fe210000.sata: Looking up ahci-supply property in node /sata@fe210000 failed
  1265. [    8.405192] ahci fe210000.sata: supply ahci not found, using dummy regulator
  1266. [    8.405322] ahci fe210000.sata: Looking up phy-supply from device tree
  1267. [    8.405331] ahci fe210000.sata: Looking up phy-supply property in node /sata@fe210000 failed
  1268. [    8.405346] ahci fe210000.sata: supply phy not found, using dummy regulator
  1269. [    8.405461] ahci fe210000.sata: Looking up target-supply from device tree
  1270. [    8.405469] ahci fe210000.sata: Looking up target-supply property in node /sata@fe210000 failed
  1271. [    8.405484] ahci fe210000.sata: supply target not found, using dummy regulator
  1272. [    8.405589] ahci fe210000.sata: forcing port_map 0x0 -> 0x1
  1273. [    8.405616] ahci fe210000.sata: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl platform mode
  1274. [    8.405623] ahci fe210000.sata: flags: ncq sntf pm led clo only pmp fbs pio slum part ccc apst
  1275. [    8.405635] ahci fe210000.sata: port 0 can do FBS, forcing FBSCP
  1276. [    8.416656] scsi host0: ahci
  1277. [    8.416782] ata1: SATA max UDMA/133 mmio [mem 0xfe210000-0xfe210fff] port 0x100 irq 76
  1278. [    8.538005] xc7160 3-001b: isp chip is xc7160
  1279. [    8.575192] xc7160 3-001b: isp chip is xc7160
  1280. [    8.583252] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1281. [    8.583681] phy_rtl8211f_led_fixup in
  1282. [    8.617572] phy_rtl8211f_led_fixup in
  1283. [    8.674022] rk_gmac-dwmac fe1b0000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
  1284. [    8.675539] dwmac4: Master AXI performs any burst length
  1285. [    8.675551] rk_gmac-dwmac fe1b0000.ethernet eth0: No Safety Features support found
  1286. [    8.675560] rk_gmac-dwmac fe1b0000.ethernet eth0: IEEE 1588-2008 Advanced Timestamp supported
  1287. [    8.675731] rk_gmac-dwmac fe1b0000.ethernet eth0: registered PTP clock
  1288. [    8.675864] rk_gmac-dwmac fe1b0000.ethernet eth0: configuring for phy/rgmii-rxid link mode
  1289. [    8.701093] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1290. [    8.701201] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1291. [    8.701380] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1292. [    8.701701] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1293. [    8.706428] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1294. [    8.706706] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1295. [    8.707036] [BT_RFKILL]: bt shut off power
  1296. [    8.707304] file system registered
  1297. [    8.823689] read descriptors
  1298. [    8.823748] read strings
  1299. [    9.184857] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1300. [    9.185195] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1301. [    9.185696] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1302. [    9.185817] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1303. [    9.315999] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1304. [    9.322526] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1305. [    9.322563] phy_rtl8211f_led_fixup in
  1306. [    9.344477] phy_rtl8211f_led_fixup in
  1307. [    9.397374] rk_gmac-dwmac fe1c0000.ethernet eth1: PHY [stmmac-1:01] driver [RTL8211F Gigabit Ethernet] (irq=POLL)
  1308. [    9.406570] dwmac4: Master AXI performs any burst length
  1309. [    9.406586] rk_gmac-dwmac fe1c0000.ethernet eth1: No Safety Features support found
  1310. [    9.406595] rk_gmac-dwmac fe1c0000.ethernet eth1: IEEE 1588-2008 Advanced Timestamp supported
  1311. [    9.406714] rk_gmac-dwmac fe1c0000.ethernet eth1: registered PTP clock
  1312. [    9.406895] rk_gmac-dwmac fe1c0000.ethernet eth1: configuring for phy/rgmii-rxid link mode
  1313. [    9.431325] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1314. [    9.437657] [dhd] Dongle Host Driver, version 101.10.361.11 (wlan=r892223-20210630-1)
  1315.                drivers/net/wireless/rockchip_wlan/rkwifi/bcmdhd compiled on Apr  1 2022 at 10:26:45

  1316. [    9.437671] [dhd] dhd_open : no mutex held. set lock
  1317. [    9.437685] [dhd] dhd_open: ######### called for ifidx=0 #########
  1318. [    9.437704] [dhd] wifi_platform_set_power = 1, delay: 200 msec
  1319. [    9.437713] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
  1320. [    9.437723] [WLAN_RFKILL]: rockchip_wifi_power: 1
  1321. [    9.437733] [WLAN_RFKILL]: rockchip_wifi_power: toggle = false
  1322. [    9.547407] [WLAN_RFKILL]: wifi turn on power [GPIO20-1]
  1323. [    9.854109] [dhd] dhd_bus_devreset: == Power ON ==
  1324. [    9.854130] [dhd] dhd_bus_devreset: dhdpcie_bus_start_host_dev OK
  1325. [    9.854772] [dhd] Disable CTO
  1326. [    9.855794] [dhd] DHD: dongle ram size is set to 1310720(orig 1310720) at 0x170000
  1327. [    9.855813] [dhd] dhdpcie_bar1_window_switch_enab: bar1_switch_enab=0 ramstart=0x170000 ramend=0x2affff bar1_size=0x400000
  1328. [    9.855850] [dhd] dhdpcie_request_irq: INTx enabled
  1329. [    9.855911] [dhd] dhd_bus_download_firmware: firmware path=/vendor/etc/firmware/fw_bcmdhd.bin, nvram path=/vendor/etc/firmware/nvram.txt
  1330. [    9.855933] [dhd] dhdpcie_dump_resource: BAR0(VA): 0x0000000000000000, BAR0(PA): 0x00000000f2200000, SIZE: 32768
  1331. [    9.855949] [dhd] dhdpcie_dump_resource: BAR1(VA): 0x0000000000000000, BAR1(PA): 0x00000000f2400000, SIZE: 4194304
  1332. [    9.857681] [dhd] dhd_os_open_image1: /vendor/etc/firmware/config.txt (205 bytes) open success
  1333. [    9.858124] [dhd] dhd_conf_read_country : regrev = 0
  1334. [    9.858222] [dhd] dhd_conf_read_others : srl = 15
  1335. [    9.858251] [dhd] dhd_conf_read_others : lrl = 15
  1336. [    9.858303] [dhd] dhd_conf_set_path_params : Final fw_path=/vendor/etc/firmware/fw_bcm43752a2_pcie_ag.bin
  1337. [    9.858326] [dhd] dhd_conf_set_path_params : Final nv_path=/vendor/etc/firmware/nvram_AP6275P.txt
  1338. [    9.858347] [dhd] dhd_conf_set_path_params : Final clm_path=/vendor/etc/firmware/clm_bcm43752a2_pcie_ag.blob
  1339. [    9.858408] [dhd] dhd_conf_set_path_params : Final conf_path=/vendor/etc/firmware/config.txt
  1340. [    9.858527] [dhd] dhdpcie_download_code_file: dhd_tcm_test_enable 0
  1341. [    9.858541] [dhd] dhdpcie_download_code_file: download firmware /vendor/etc/firmware/fw_bcm43752a2_pcie_ag.bin
  1342. [    9.858707] [dhd] dhd_os_open_image1: /vendor/etc/firmware/fw_bcm43752a2_pcie_ag.bin (857142 bytes) open success
  1343. [    9.930880] android_work: did not send uevent (0 0 0000000000000000)
  1344. [    9.946634] [dhd] dhd_os_open_image1: /vendor/etc/firmware/nvram_AP6275P.txt (7335 bytes) open success
  1345. [    9.947325] [dhd] dhdpcie_download_nvram: dhd_get_download_buffer len 7335
  1346. [    9.947331] [dhd] NVRAM version:  AP6275P_NVRAM_V1.1_20200702
  1347. [    9.947417] [dhd] dhdpcie_download_nvram: process_nvram_vars len 5860
  1348. [    9.965668] [dhd] dhdpcie_bus_write_vars: Download, Upload and compare of NVRAM succeeded.
  1349. [    9.965879] [dhd] dhd_bus_aer_config: Configure AER registers for EP
  1350. [    9.965907] [dhd] dhd_bus_aer_config: Configure AER registers for RC
  1351. [   10.045778] [dhd] ### Total time ARM OOR to Readshared pass took 79951 usec ###
  1352. [   10.045785] [dhd] dhdpcie_readshared: PCIe shared addr (0x001f8974) read took 80000 usec before dongle is ready
  1353. [   10.046209] [dhd] H2D DMA WR INDX : array size 172 = 4 * 43
  1354. [   10.046217] [dhd] D2H DMA RD INDX : array size 16 = 4 * 4
  1355. [   10.046225] [dhd] D2H DMA WR INDX : array size 16 = 4 * 4
  1356. [   10.046233] [dhd] H2D DMA RD INDX : array size 172 = 4 * 43
  1357. [   10.046237] [dhd] dhdpcie_readshared: max H2D queues 40
  1358. [   10.046239] [dhd] FW supports debug buf dest ? N
  1359. [   10.046271] [dhd] dhd_bus_init: Enabling bus->intr_enabled
  1360. [   10.046276] [dhd] dhdpcie_oob_intr_register OOB irq=147 flags=0x1
  1361. [   10.046312] [dhd] dhdpcie_oob_intr_register: enable_irq_wake
  1362. [   10.046316] [dhd] dhd_bus_start: Initializing 43 h2drings
  1363. [   10.046348] [dhd] dhd_prot_init:3925: h2d_max_txpost = 512
  1364. [   10.046354] [dhd] dhd_prot_init:3940: MAX_RXBUFPOST = 511
  1365. [   10.046357] [dhd] ENABLING DW:0
  1366. [   10.046360] [dhd] IDMA inited
  1367. [   10.046362] [dhd] IFRM not enabled in FW !!
  1368. [   10.046364] [dhd] DAR not enabled in FW !!
  1369. [   10.046366] [dhd] Enable hostcap: EXTD TXS in txcpl
  1370. [   10.046391] [dhd] dhd_prot_d2h_sync_init(): D2H sync mechanism is NONE
  1371. [   10.046406] [dhd] dhd_bus_hostready : Read PCICMD Reg: 0x00100006
  1372. [   10.046421] [dhd] dhd_bus_dump_dar_registers: dar_clk_ctrl(0xa08:0x10b0040) dar_pwr_ctrl(0xa0c:0x30000) dar_intstat(0xa10:0x0)
  1373. [   10.046425] [dhd] dhd_bus_dump_dar_registers: dar_errlog(0xa60:0x0) dar_erraddr(0xa64:0x0) dar_pcie_mbint(0xa68:0x0)
  1374. [   10.046431] [dhd] dhd_bus_hostready: Ring Hostready:1
  1375. [   10.046435] [dhd] Attach flowrings pool for 40 rings
  1376. [   10.073041] [dhd] iDMA enabled PCIEControl = 00000001
  1377. [   10.075454] [dhd] dhd_send_d2h_ringcreate ringid: 3 idx: 46 max_h2d: 43
  1378. [   10.075639] [dhd] dhd_prot_process_d2h_ring_create_complete ring create Response status = 0 ring 3, id 0xfffc
  1379. [   10.075729] [dhd] info buffer post after ring create
  1380. [   10.077475] [dhd] wlc_ver_major 12, wlc_ver_minor 1
  1381. [   10.077485] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
  1382. [   10.078025] [dhd] dhd_sync_with_dongle: GET_REVINFO device 0x449d, vendor 0x14e4, chipnum 0xaae8
  1383. [   10.078554] [dhd] dhd_sync_with_dongle: RxBuf Post : 2048
  1384. [   10.082354] [dhd] dhd_preinit_ioctls: preinit_status IOVAR not supported, use legacy preinit
  1385. [   10.082368] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 3
  1386. [   10.083304] [dhd] dhd_legacy_preinit_ioctls: hostwake_oob enabled
  1387. [   10.084601] [dhd] dhd_legacy_preinit_ioctls: use firmware generated mac_address 10:2c:6b:fc:f6:a8
  1388. [   10.084782] [dhd] dhd_os_open_image1: /vendor/etc/firmware/clm_bcm43752a2_pcie_ag.blob (29225 bytes) open success
  1389. [   10.086107] [dhd] dhd_check_current_clm_data: ----- This FW is not included CLM data -----
  1390. [   10.117791] [dhd] dhd_check_current_clm_data: ----- This FW is included CLM data -----
  1391. [   10.121167] [dhd] Firmware up: op_mode=0x0005, MAC=10:2c:6b:fc:f6:a8
  1392. [   10.129711] [dhd] dhd_legacy_preinit_ioctls: event_log_max_sets: 26 ret: 0
  1393. [   10.135680] [dhd] arp_enable:1 arp_ol:0
  1394. [   10.141808] [dhd]   Driver: 101.10.361.11 (wlan=r892223-20210630-1)
  1395.                  Firmware: wl0: Aug  3 2021 17:38:16 version 18.35.387.23.57 (gdc961cae) FWID 01-ea656a70
  1396.                  CLM: 9.9.8_SS (2021-05-10 15:05:58)
  1397. [   10.142391] [dhd] dhd_pno_init: Support Android Location Service
  1398. [   10.142405] [dhd] dhd_rtt_init ENTRY
  1399. [   10.143068] [dhd] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
  1400. [   10.143082] [dhd] dhd_rtt_init : FTM is not supported
  1401. [   10.143092] [dhd] dhd_rtt_init EXIT, err = 0
  1402. [   10.152606] [dhd] [INIT] logset:8 is preserve/chatty
  1403. [   10.154168] [dhd] [INIT] logset:10 is preserve/chatty
  1404. [   10.165562] [dhd] dhd_ecounter_autoconfig Ecounter autoconfig in FW not supported
  1405. [   10.194624] [dhd] dhd_conf_set_country : set country CN, revision 0
  1406. [   10.194649] [dhd] dhd_rx_frame: net device is NOT registered. drop event packet
  1407. [   10.199333] [dhd] dhd_conf_set_country : Country code: CN (CN/0)
  1408. [   10.207767] [dhd] dhd_bus_devreset: WLAN Power On Done
  1409. [   10.232907] [dhd] dhd_rx_frame: net device is NOT registered. drop event packet
  1410. [   10.262465] [dhd] dhd_open : the lock is released.
  1411. [   10.263879] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1412. [   10.450261] [dhd] P2P interface registered
  1413. [   10.450269] [dhd] wl_cfgp2p_add_p2p_disc_if: wdev: 00000000c412b110, wdev->net: 0000000000000000
  1414. [   10.524527] ttyFIQ ttyFIQ0: tty_port_close_start: tty->count = 1 port count = 2
  1415. [   10.554104] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1416. [   10.554327] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1417. [   10.554505] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1418. [   10.979670] systemd-journald[491]: File /var/log/journal/634553a90ac84a93bd8f946cfc7ea9d8/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
  1419. [   11.452591] rk_gmac-dwmac fe1c0000.ethernet eth1: Link is Up - 100Mbps/Full - flow control rx/tx
  1420. [   11.452617] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  1421. [   11.452727] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1422. [   11.454130] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1423. [   11.462792] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1424. [   11.471057] xc7160 3-001b: isp chip is xc7160
  1425. [   11.510696] xc7160 3-001b: isp chip is xc7160
  1426. [   11.547968] xc7160 3-001b: isp chip is xc7160
  1427. [   11.581152] xc7160 3-001b: isp chip is xc7160
  1428. [   11.624672] xc7160 3-001b: isp chip is xc7160
  1429. [   11.664441] xc7160 3-001b: isp chip is xc7160
  1430. [   11.702334] xc7160 3-001b: isp chip is xc7160
  1431. [   11.738162] xc7160 3-001b: isp chip is xc7160
  1432. [   12.965687] rockchip-i2s-tdm fddf8000.i2s: reset rx
  1433. [   13.631617] xc7160 3-001b: isp chip is xc7160
  1434. [   13.691666] xc7160 3-001b: isp chip is xc7160
  1435. [   13.744763] xc7160 3-001b: isp chip is xc7160
  1436. [   13.792324] xc7160 3-001b: isp chip is xc7160
  1437. [   13.837840] xc7160 3-001b: isp chip is xc7160
  1438. [   13.869729] rockchip-i2s-tdm fddf8000.i2s: reset rx
  1439. [   13.871781] xc7160 3-001b: isp chip is xc7160
  1440. [   13.890693] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  1441. [   13.891136] ata1.15: Port Multiplier 1.2, 0x197b:0x5755 r0, 5 ports, feat 0x5/0xf
  1442. [   13.899022] ahci fe210000.sata: FBS is enabled
  1443. [   13.899475] ata1.00: hard resetting link
  1444. [   13.914477] xc7160 3-001b: isp chip is xc7160
  1445. [   13.947785] xc7160 3-001b: isp chip is xc7160
  1446. [   14.215713] ata1.00: SATA link down (SStatus 0 SControl 330)
  1447. [   14.215882] ata1.01: hard resetting link
  1448. [   14.437446] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
  1449. [   14.532734] ata1.01: SATA link down (SStatus 0 SControl 330)
  1450. [   14.532859] ata1.02: hard resetting link
  1451. [   14.768602] rockchip-i2s-tdm fddf8000.i2s: reset rx
  1452. [   14.845299] ata1.02: SATA link down (SStatus 0 SControl 330)
  1453. [   14.845521] ata1.03: hard resetting link
  1454. [   15.158372] ata1.03: SATA link down (SStatus 0 SControl 330)
  1455. [   15.158547] ata1.04: hard resetting link
  1456. [   15.472651] ata1.04: SATA link down (SStatus 0 SControl 330)
  1457. [   15.472788] ata1: EH complete
  1458. [   35.770731] vcc3v3_pcie30: disabling
  1459. [   35.770782] vbus5v0_typec_pwr_en: disabling
  1460. [   41.616313] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1461. [   41.616929] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
  1462. [   41.617613] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
复制代码

作者: 板蓝根    时间: 2022-4-19 09:25
一切正常,XDG_RUNTIME_DIR=/run/user/1000 gst-launch-1.0 v4l2src device=/dev/video0 !  queue !video/x-raw,format=NV12,width=1920,height=1080, framerate=30/1 ! videoconvert ! glimagesink 试一下
作者: wyglily    时间: 2022-4-19 10:45
root@firefly:/home/firefly#
root@firefly:/home/firefly# XDG_RUNTIME_DIR=/run/user/1000 gst-launch-1.0 v4l2src device=/dev/video0 !  queue ! video/x-raw,format=NV12,width=1920,height=1080, framerate=30/1 ! videoconvert ! glimagesink
Setting pipeline to PAUSED ...
arm_release_ver of this libmali is 'g6p0-01eac0', rk_so_ver is '5'.
ERROR: Pipeline doesn't want to pause.
Got context from element 'sink': gst.gl.GLDisplay=context, gst.gl.GLDisplay=(GstGLDisplay)"\(GstGLDisplayWayland\)\ gldisplaywayland0";
ERROR: from element /GstPipeline:pipeline0/GstGLImageSinkBin:glimagesinkbin0/GstGLImageSink:sink: Failed to bind OpenGL API: EGL_BAD_PARAMETER
Additional debug info:
gstglimagesink.c(1010): _ensure_gl_setup (): /GstPipeline:pipeline0/GstGLImageSinkBin:glimagesinkbin0/GstGLImageSink:sink
Setting pipeline to NULL ...
Freeing pipeline ...
root@firefly:/home/firefly#
作者: wyglily    时间: 2022-4-20 09:46
4月6的android image 可以识别摄像头,ubuntu 的img 就是无法成功,你能不否把你们验证过的imag给我们一份我试下。同时再问下怎么用ffmpeg 测试这个摄像头,命令行参数如何下?谢谢!
作者: wyglily    时间: 2022-4-20 11:33
板蓝根 发表于 2022-4-19 09:25
一切正常,XDG_RUNTIME_DIR=/run/user/1000 gst-launch-1.0 v4l2src device=/dev/video0 !  queue !video/x ...

具体是什么原因,你们查到了吗?这可是你们官方image说的是支持的,实际上却不能在ubuntu 下工作。
作者: 板蓝根    时间: 2022-4-20 14:54
ITX-3588J_Ubuntu20.04-Gnome-r211_v0.0.1c_220402.img 我们验证的就是这个 image,已经有几个客户在用了同样的方法点亮了,请确认客户自己有没有修改过环境。另外 ffmpeg 不支持摄像头抓取,目前支持 gstreamer 或者直接用 v4l2 接口抓图
作者: wyglily    时间: 2022-4-20 15:13
原有的是android,没有改过环境,我们直接把ITX-3588J_Ubuntu20.04-Gnome-r211_v0.0.1c_220402.img用v2.84烧录工具直接升级。
作者: wyglily    时间: 2022-4-20 18:07
v4l2-ctl --verbose -d /dev/video0 --set-fmt-video=width=1920,height=1080,pixelformat='NV12' --stream-mmap=4 --set-selection=target=crop,flags=0,top=0,left=0,width=1920,height=1080 --stream-to=/userdata/out.yuv


cap dqbuf: 2 seq:   1588 bytesused: 3110400 ts: 296.503253 delta: 33.329 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 3 seq:   1589 bytesused: 3110400 ts: 296.536591 delta: 33.338 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 1 seq:   1590 bytesused: 3110400 ts: 296.569923 delta: 33.332 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 0 seq:   1591 bytesused: 3110400 ts: 296.603248 delta: 33.325 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 2 seq:   1592 bytesused: 3110400 ts: 296.636581 delta: 33.333 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 3 seq:   1593 bytesused: 3110400 ts: 296.669956 delta: 33.375 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 1 seq:   1594 bytesused: 3110400 ts: 296.703244 delta: 33.288 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 0 seq:   1595 bytesused: 3110400 ts: 296.736577 delta: 33.333 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 2 seq:   1596 bytesused: 3110400 ts: 296.769911 delta: 33.334 ms fps: 29.88 (ts-monotonic, ts-src-eof)
cap dqbuf: 3 seq:   1597 bytesused: 3110400 ts: 296.803244 delta: 33.333 ms fps: 29.88 (ts-monotonic, ts-src-eof)

root@firefly:/userdata# ls out.yuv  -l
-rw-r--r-- 1 root root 0 Apr 20 09:55 out.yuv
root@firefly:/userdata#

out.yuv size is 0

作者: 板蓝根    时间: 2022-4-22 09:44
ubuntu20.04 的v4l2-ctl 不能用于抓图,如果需要用 v4l2-ctl 只能回退的 v4l2-ctl 1.16.5 的版本,但是看帧率都出来了应该 gstreamer 可以抓才对
作者: Ziven_zhou    时间: 2022-4-29 13:49
你可以先记录一下你插入USB摄像头之前的  ls /dev/video*  看有几个 /dev/video0~/dev/videoN   N 为几个;
再插入USB摄像头 ls /dev/video* 增加在那个就是 ,
我也碰到了这个问题 , 人机器上 是用的  /dev/video9 才能 ;
作者: suchb    时间: 2022-8-31 10:51
板蓝根 发表于 2022-4-18 14:40
我这边测试没有问题,mipi 摄像头接在背后的 mipi 接口(背后只有一个),附件 log 乱码,还有可以用androi ...

您好,你这边使用的是ubuntu来测试cam-8ms1m没有问题是吗,我们需要在rk3588 ubuntu上使用这个摄像头,请问目前是否支持,盼复 感谢。




欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/) Powered by Discuz! X3.1