Firefly开源社区

12
发表新贴
打印 上一主题 下一主题

[Linux] rk3588 USB DEVICE

94

积分

0

威望

0

贡献

技术小白

积分
94

rk3588 USB DEVICE

发表于 2023-1-11 17:15:18      浏览:5204 | 回复:14        打印      只看该作者   [复制链接] 楼主
我们想将typec1配置为usb2-phy的usb device使用,使用rndis配置为网口,这边按照手册修改为device后配置randis只能看到typec0的网卡usb0,找不到typec1的网卡,请问一下该如何配置。
回复

使用道具 举报

1033

积分

1

威望

3

贡献

官方团队

Rank: 9Rank: 9Rank: 9

积分
1033
发表于 2023-1-12 10:00:45        只看该作者  沙发
你们用的是哪个3588的板子?是使用我们的核心板CORE-3588J,然后你们自行设计的底版?你描述的按照手册是哪份文档呢?另外还有的配置是如何配置的方便展示出来吗?
回复

使用道具 举报

94

积分

0

威望

0

贡献

技术小白

积分
94
发表于 2023-1-12 14:57:41        只看该作者  板凳
zhangzhenzhao 发表于 2023-1-12 10:00
你们用的是哪个3588的板子?是使用我们的核心板CORE-3588J,然后你们自行设计的底版?你描述的按照手册是哪 ...

使用的是你们的核心板CORE-3588J,搭载我们自己设计的底板,然后typec0就是全功能typec0,目前功能正常,typec1有特殊要求,现在就想用他都usb2.0的device功能,SDK默认配置的是host功能,可以挂载u盘,功能是正常的,我按照《Rockchip_RK3588_Developer_Guide_USB_CN.pdf》设备树进行配置的,配置为device模式后确实不能挂载U盘了,但配置rndis模式时,只能看到typc0一张网卡。我修改的设备树部分见图片,望解答一下。

rk3588-firfly-itx-3588j.dtsi.png (24.6 KB, 下载次数: 165)

rk3588-firfly-itx-3588j.dtsi.png
回复

使用道具 举报

1033

积分

1

威望

3

贡献

官方团队

Rank: 9Rank: 9Rank: 9

积分
1033
发表于 2023-1-12 15:14:26        只看该作者  地板
热心市民小左 发表于 2023-1-12 14:57
使用的是你们的核心板CORE-3588J,搭载我们自己设计的底板,然后typec0就是全功能typec0,目前功能正常, ...

可以复现问题抓份开机log,上层和内核的都提供看看

还有这个应该也要添加吧
&usbdrd3_1 {
        status = "okay";
};
回复

使用道具 举报

94

积分

0

威望

0

贡献

技术小白

积分
94
发表于 2023-1-16 14:45:05        只看该作者  5#
zhangzhenzhao 发表于 2023-1-12 15:14
可以复现问题抓份开机log,上层和内核的都提供看看

还有这个应该也要添加吧

DDR Version V1.08 20220617
LPDDR4, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
Manufacturer ID:0xff
CH0 RX Vref:28.7%, TX Vref:12.2%,0.0%
CH1 RX Vref:28.7%, TX Vref:12.2%,0.0%
CH2 RX Vref:29.7%, TX Vref:12.2%,0.0%
CH3 RX Vref:27.7%, TX Vref:12.2%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 1
spl: mmc init failed with error: -123
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(ce2098067b...) + OK
## Checking uboot 0x00200000 ... sha256(2efcb2855d...) + OK
## Checking fdt 0x0035b2f8 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(ebc45c531e...) + OK
## Checking atf-3 0xff100000 ... sha256(9ded9f3bb5...) + OK
## Checking optee 0x08400000 ... sha256(fde0860845...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 118.721 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-444-g1450d21e8:derrick.huang
NOTICE:  BL31: Built : 16:25:50, Oct 12 2022
INFO:    spec: 0x1
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC:
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09(u-boot commit id: e8b5ef0c39)(sdk version: rk3588_linux_release_20221012_v1.0.2a)-ge8b5ef0c39 #root (Jan 16 2023 - 14:22:46 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: eda1c000
Relocation fdt: eb9f9fb8 - eb9fecc0
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: None
=================begin===================
162343 bytes read in 7 ms (22.1 MiB/s)
DTB(Distro): rk-kernel.dtb
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
I2c6 speed: 400000Hz
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Firefly ITX-3588J HDMI(Linux)
No resource partition
No file: logo.bmp
=================begin===================
512 bytes read in 2 ms (250 KiB/s)
logo(Distro): logo.bmp
=================begin===================
127818 bytes read in 4 ms (30.5 MiB/s)
logo(Distro): logo.bmp
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
hdmi@fde80000 disconnected
CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 594000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image FIT: No fit blob
FIT: No FIT image
Unknown command 'bootrkp' - try 'help'
MMC: no card present
mmc_init: -123, time 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:3...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
=================begin===================
104 bytes read in 3 ms (33.2 KiB/s)
FIREFLY: use /rk-kernel.dtb
1:      rk-kernel.dtb linux-5.10.110
Retrieving file: /initrd-5.10.110
=================begin===================
9233322 bytes read in 54 ms (163.1 MiB/s)
Retrieving file: /Image-5.10.110
=================begin===================
41757184 bytes read in 263 ms (151.4 MiB/s)
Retrieving file: /rk-kernel.dtb
=================begin===================
162343 bytes read in 8 ms (19.4 MiB/s)
Fdt Ramdisk skip relocation
## Flattened Device Tree blob at 0x08300000
   Booting using the fdt blob at 0x08300000
  'reserved-memory' cma: addr=10000000 size=10000000
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000832aa26
No resource partition
No file: logo_kernel.bmp
=================begin===================
512 bytes read in 3 ms (166 KiB/s)
logo(Distro): logo_kernel.bmp
=================begin===================
127818 bytes read in 4 ms (30.5 MiB/s)
logo(Distro): logo_kernel.bmp
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 643.929 ms

Starting kernel ...

[    0.773385] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.773411] Linux version 5.10.110 (root@zh-virtual-machine) (kernel commit id: 4a55b55733a0) (sdk version: rk3588_linux_release_20221012_v1.0.2a) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #5 SMP Fri Jan 13 16:43:37 CST 2023
[    0.780968] Machine model: Firefly ITX-3588J HDMI(Linux)
[    0.781051] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.785895] printk: bootconsole [uart8250] enabled
[    0.788120] efi: UEFI not found.
[    0.792470] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.793622] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[    0.794364] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    0.910064] Zone ranges:
[    0.910303]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.910875]   DMA32    empty
[    0.911144]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.911713] Movable zone start for each node
[    0.912105] Early memory node ranges
[    0.912435]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.913011]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    0.913587]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.914165] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.961530] psci: probing for conduit method from DT.
[    0.962002] psci: PSCIv1.1 detected in firmware.
[    0.962426] psci: Using standard PSCI v0.2 function IDs
[    0.962907] psci: Trusted OS migration not required
[    0.963358] psci: SMC Calling Convention v1.2
[    0.964164] percpu: Embedded 32 pages/cpu s93160 r8192 d29720 u131072
[    0.964968] Detected VIPT I-cache on CPU0
[    0.965370] CPU features: detected: GIC system register CPU interface
[    0.965962] CPU features: detected: Virtualization Host Extensions
[    0.966534] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.967180] alternatives: patching kernel code
[    0.969773] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[    0.970411] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  storagenode=/mmc@fe2e0000 androidboot.verifiedbootstate=orange ro rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.974935] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.976062] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.976782] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.983644] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)
[    1.049296] Memory: 7571076K/8108032K available (22336K kernel code, 3786K rwdata, 6892K rodata, 7616K init, 656K bss, 274812K reserved, 262144K cma-reserved)
[    1.050719] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    1.051346] ftrace: allocating 67468 entries in 264 pages
[    1.150441] ftrace: allocated 264 pages with 2 groups
[    1.151173] rcu: Hierarchical RCU implementation.
[    1.151610] rcu:     RCU event tracing is enabled.
[    1.152027]  Rude variant of Tasks RCU enabled.
[    1.152443]  Tracing variant of Tasks RCU enabled.
[    1.152883] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.158684] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.161116] GICv3: GIC: Using split EOI/Deactivate mode
[    1.161600] GICv3: 480 SPIs implemented
[    1.161953] GICv3: 0 Extended SPIs implemented
[    1.162386] GICv3: Distributor has no Range Selector support
[    1.162911] GICv3: 16 PPIs implemented
[    1.163297] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.164031] ITS [mem 0xfe640000-0xfe65ffff]
[    1.164459] ITS@0x00000000fe640000: allocated 8192 Devices @100220000 (indirect, esz 8, psz 64K, shr 0)
[    1.165338] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100230000 (flat, esz 2, psz 64K, shr 0)
[    1.166289] ITS: using cache flushing for cmd queue
[    1.166765] ITS [mem 0xfe660000-0xfe67ffff]
[    1.167187] ITS@0x00000000fe660000: allocated 8192 Devices @100250000 (indirect, esz 8, psz 64K, shr 0)
[    1.168066] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100260000 (flat, esz 2, psz 64K, shr 0)
[    1.169015] ITS: using cache flushing for cmd queue
[    1.169593] GICv3: using LPI property table @0x0000000100270000
[    1.170248] GIC: using cache flushing for LPI property table
[    1.170771] GICv3: CPU0: using allocated LPI pending table @0x0000000100280000
[    1.171583] random: get_random_bytes called from start_kernel+0x3f0/0x65c with crng_init=0
[    1.281316] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.282586] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.283546] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.285161] Console: colour dummy device 80x25
[    1.285581] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.286496] pid_max: default: 32768 minimum: 301
[    1.286993] LSM: Security Framework initializing
[    1.287465] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.288154] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.290374] rcu: Hierarchical SRCU implementation.
[    1.291577] Platform MSI: msi-controller@fe640000 domain created
[    1.292125] Platform MSI: msi-controller@fe660000 domain created
[    1.292927] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.293674] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.294505] EFI services will not be available.
[    1.295180] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.296725] Detected VIPT I-cache on CPU1
[    1.296754] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.296769] GICv3: CPU1: using allocated LPI pending table @0x0000000100290000
[    1.296813] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.298007] Detected VIPT I-cache on CPU2
[    1.298029] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.298043] GICv3: CPU2: using allocated LPI pending table @0x00000001002a0000
[    1.298080] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.299238] Detected VIPT I-cache on CPU3
[    1.299256] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.299270] GICv3: CPU3: using allocated LPI pending table @0x00000001002b0000
[    1.299305] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.300471] CPU features: detected: Spectre-v4
[    1.300473] CPU features: detected: Spectre-BHB
[    1.300475] Detected PIPT I-cache on CPU4
[    1.300486] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.300494] GICv3: CPU4: using allocated LPI pending table @0x00000001002c0000
[    1.300517] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.301633] Detected PIPT I-cache on CPU5
[    1.301644] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.301652] GICv3: CPU5: using allocated LPI pending table @0x00000001002d0000
[    1.301676] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.302805] Detected PIPT I-cache on CPU6
[    1.302817] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.302824] GICv3: CPU6: using allocated LPI pending table @0x00000001002e0000
[    1.302848] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.303962] Detected PIPT I-cache on CPU7
[    1.303974] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.303981] GICv3: CPU7: using allocated LPI pending table @0x00000001002f0000
[    1.304004] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.304060] smp: Brought up 1 node, 8 CPUs
[    1.320529] SMP: Total of 8 processors activated.
[    1.320952] CPU features: detected: Privileged Access Never
[    1.321448] CPU features: detected: User Access Override
[    1.321921] CPU features: detected: 32-bit EL0 Support
[    1.322376] CPU features: detected: Common not Private translations
[    1.322929] CPU features: detected: RAS Extension Support
[    1.323407] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.324170] CPU features: detected: CRC32 instructions
[    1.324631] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.325249] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.325834] CPU: All CPU(s) started at EL2
[    1.328314] devtmpfs: initialized
[    1.336540] Registered cp15_barrier emulation handler
[    1.336996] Registered setend emulation handler
[    1.337468] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.338337] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.339064] pinctrl core: initialized pinctrl subsystem
[    1.339738] DMI not present or invalid.
[    1.340178] NET: Registered protocol family 16
[    1.341056] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.341755] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.342466] audit: initializing netlink subsys (disabled)
[    1.342999] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1
[    1.343421] thermal_sys: Registered thermal governor 'fair_share'
[    1.343691] thermal_sys: Registered thermal governor 'step_wise'
[    1.344238] thermal_sys: Registered thermal governor 'user_space'
[    1.344772] thermal_sys: Registered thermal governor 'power_allocator'
[    1.345420] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.346728] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.347460] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.348198] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.348933] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.349665] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.350390] cpuidle: using governor menu
[    1.350745] Registered FIQ tty driver
[    1.351179] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.351870] ASID allocator initialised with 65536 entries
[    1.353329] ramoops: dmesg-0 0x20000@0x0000000000110000
[    1.353802] ramoops: console 0x80000@0x0000000000130000
[    1.354280] ramoops: pmsg    0x50000@0x00000000001b0000
[    1.354950] printk: console [ramoops-1] enabled
[    1.355353] pstore: Registered ramoops as persistent store backend
[    1.355902] ramoops: using 0xf0000@0x110000, ecc: 0
[    1.387711] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.388470] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.389203] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.389952] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.390713] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.391314] rockchip-pinctrl pinctrl: probed pinctrl
[    1.397828] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    1.398434] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    1.399033] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.399628] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    1.458139] raid6: neonx8   gen()  5614 MB/s
[    1.514864] raid6: neonx8   xor()  4430 MB/s
[    1.571589] raid6: neonx4   gen()  5545 MB/s
[    1.628313] raid6: neonx4   xor()  4636 MB/s
[    1.685041] raid6: neonx2   gen()  5357 MB/s
[    1.741765] raid6: neonx2   xor()  4423 MB/s
[    1.798490] raid6: neonx1   gen()  4368 MB/s
[    1.855216] raid6: neonx1   xor()  3628 MB/s
[    1.911941] raid6: int64x8  gen()  2630 MB/s
[    1.968668] raid6: int64x8  xor()  1558 MB/s
[    2.025397] raid6: int64x4  gen()  2946 MB/s
[    2.082121] raid6: int64x4  xor()  1567 MB/s
[    2.138847] raid6: int64x2  gen()  2513 MB/s
[    2.195575] raid6: int64x2  xor()  1355 MB/s
[    2.252301] raid6: int64x1  gen()  2060 MB/s
[    2.309020] raid6: int64x1  xor()  1082 MB/s
[    2.309399] raid6: using algorithm neonx8 gen() 5614 MB/s
[    2.309879] raid6: .... xor() 4430 MB/s, rmw enabled
[    2.310321] raid6: using neon recovery algorithm
[    2.311196] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    2.311684] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    2.312198] fiq_debugger_probe: could not install nmi irq handler
[[    2.312782] printk: console [ttyFIQ0] enabled
    2.312782] printk: console [ttyFIQ0] enabled
[    2.313543] printk: bootconsole [uart8250] disabled
[    2.313543] printk: bootconsole [uart8250] disabled
[    2.314051] Registered fiq debugger ttyFIQ0
[    2.314329] vcc5v0_sys: supplied by vcc12v_dcin
[    2.314417] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    2.314504] vcc5v0_usb: supplied by vcc12v_dcin
[    2.314585] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    2.314871] iommu: Default domain type: Passthrough
[    2.314931] rk_iommu fdab9000.iommu: version = 2
[    2.315212] rk_iommu fdb50800.iommu: version = 2
[    2.315408] rk_iommu fdb60f00.iommu: version = 2
[    2.315548] rk_iommu fdb70f00.iommu: version = 2
[    2.315682] rk_iommu fdb90480.iommu: version = 2
[    2.315834] rk_iommu fdba0800.iommu: version = 2
[    2.315986] rk_iommu fdba4800.iommu: version = 2
[    2.316147] rk_iommu fdba8800.iommu: version = 2
[    2.316299] rk_iommu fdbac800.iommu: version = 2
[    2.316449] rk_iommu fdbb0800.iommu: version = 2
[    2.316602] rk_iommu fdbdf000.iommu: version = 2
[    2.316814] rk_iommu fdbef000.iommu: version = 2
[    2.317044] rk_iommu fdc38700.iommu: version = 2
[    2.317282] rk_iommu fdc48700.iommu: version = 2
[    2.317454] rk_iommu fdce0800.iommu: version = 2
[    2.317541] rk_iommu fdd97e00.iommu: version = 2
[    2.317779] usbcore: registered new interface driver usbfs
[    2.317793] usbcore: registered new interface driver hub
[    2.317806] usbcore: registered new device driver usb
[    2.317834] mc: Linux media interface: v0.10
[    2.317842] videodev: Linux video capture interface: v2.00
[    2.317863] pps_core: LinuxPPS API ver. 1 registered
[    2.317867] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.317872] PTP clock support registered
[    2.318071] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    2.318101] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    2.318924] Advanced Linux Sound Architecture Driver Initialized.
[    2.319097] Bluetooth: Core ver 2.22
[    2.319108] NET: Registered protocol family 31
[    2.319111] Bluetooth: HCI device and connection manager initialized
[    2.319115] Bluetooth: HCI socket layer initialized
[    2.319119] Bluetooth: L2CAP socket layer initialized
[    2.319126] Bluetooth: SCO socket layer initialized
[    2.320391] rockchip-cpuinfo cpuinfo: SoC            : 35880000
[    2.320396] rockchip-cpuinfo cpuinfo: Serial         : b82e58b2f6342537
[    2.320653] clocksource: Switched to clocksource arch_sys_counter
[    2.583074] NET: Registered protocol family 2
[    2.583186] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    2.585101] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    2.585191] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.585521] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    2.586292] TCP: Hash tables configured (established 65536 bind 65536)
[    2.586336] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.586490] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.586682] NET: Registered protocol family 1
[    2.586866] RPC: Registered named UNIX socket transport module.
[    2.586869] RPC: Registered udp transport module.
[    2.586872] RPC: Registered tcp transport module.
[    2.586875] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.587185] PCI: CLS 0 bytes, default 64
[    2.587427] Trying to unpack rootfs image as initramfs...
[    2.792218] Freeing initrd memory: 9016K
[    2.792779] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    2.793156] kvm [1]: IPA Size Limit: 40 bits
[    2.793168] kvm [1]: GICv3: no GICV resource entry
[    2.793172] kvm [1]: disabling GICv2 emulation
[    2.793176] kvm [1]: GIC system register CPU interface enabled
[    2.793276] kvm [1]: vgic interrupt IRQ9
[    2.793403] kvm [1]: VHE mode initialized successfully
[    2.795146] Initialise system trusted keyrings
[    2.795193] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    2.797090] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.797303] NFS: Registering the id_resolver key type
[    2.797319] Key type id_resolver registered
[    2.797323] Key type id_legacy registered
[    2.797329] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.797769] Key type cifs.spnego registered
[    2.797775] Key type cifs.idmap registered
[    2.797779] ntfs: driver 2.1.32 [Flags: R/O].
[    2.797828] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
[    2.797908] fuse: init (API version 7.32)
[    2.798042] SGI XFS with security attributes, no debug enabled
[    2.819005] NET: Registered protocol family 38
[    2.819013] xor: measuring software checksum speed
[    2.820421]    8regs           :  7017 MB/sec
[    2.821597]    32regs          :  8428 MB/sec
[    2.822474]    arm64_neon      : 11302 MB/sec
[    2.822478] xor: using function: arm64_neon (11302 MB/sec)
[    2.822483] Key type asymmetric registered
[    2.822487] Asymmetric key parser 'x509' registered
[    2.822504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    2.822548] io scheduler mq-deadline registered
[    2.822554] io scheduler kyber registered
[    2.822951] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
[    2.823141] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[    2.824826] rockchip-usb2phy fd5d8000.syscon:usb2-phy@8000: failed to create phy
[    2.825167] rockchip-usb2phy fd5dc000.syscon:usb2-phy@c000: failed to create phy
[    2.825622] rockchip-usb2phy fd5d4000.syscon:usb2-phy@4000: failed to create phy
[    2.827014] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    2.827853] Firefly gpio driver init!
[    2.827927] Firefly gpio driver register return : 0
[    2.828784] iep: Module initialized.
[    2.828811] mpp_service mpp-srv: 75e32fd43421 author: daijh 2022-11-02 Merge branch 'rk3588/rockchip' into rk3588/firefly
[    2.828816] mpp_service mpp-srv: probe start
[    2.829753] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    2.829775] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.829946] mpp_vdpu2 fdb50400.vdpu: probe device
[    2.830030] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    2.830038] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    2.830111] mpp_vdpu2 fdb50400.vdpu: probing finish
[    2.830270] mpp_vepu2 jpege-ccu: probing start
[    2.830275] mpp_vepu2 jpege-ccu: probing finish
[    2.830357] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    2.830366] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.830491] mpp_vepu2 fdba0000.jpege-core: probing start
[    2.830568] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    2.830630] mpp_vepu2 fdba0000.jpege-core: probing finish
[    2.830715] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    2.830727] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.830850] mpp_vepu2 fdba4000.jpege-core: probing start
[    2.830929] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    2.830991] mpp_vepu2 fdba4000.jpege-core: probing finish
[    2.831064] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    2.831073] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.831211] mpp_vepu2 fdba8000.jpege-core: probing start
[    2.831287] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    2.831347] mpp_vepu2 fdba8000.jpege-core: probing finish
[    2.831420] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    2.831429] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.831547] mpp_vepu2 fdbac000.jpege-core: probing start
[    2.831621] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    2.831682] mpp_vepu2 fdbac000.jpege-core: probing finish
[    2.831885] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    2.831894] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.832013] mpp-iep2 fdbb0000.iep: probe device
[    2.832109] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    2.832164] mpp-iep2 fdbb0000.iep: probing finish
[    2.832322] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    2.832332] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.832500] mpp_jpgdec fdb90000.jpegd: probe device
[    2.832643] mpp_jpgdec fdb90000.jpegd: probing finish
[    2.832921] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    2.832962] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    2.833019] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    2.833029] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.833238] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    2.833327] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    2.833330] rkvdec2_init:1008: No niu aclk reset resource define
[    2.833335] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    2.833338] rkvdec2_init:1011: No niu hclk reset resource define
[    2.833352] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
[    2.833403] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    2.833406] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    2.833544] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[    2.833548] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[    2.833551] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[    2.833554] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    2.833558] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    2.833580] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    2.833635] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    2.833645] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.833829] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    2.833913] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    2.833917] rkvdec2_init:1008: No niu aclk reset resource define
[    2.833921] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    2.833924] rkvdec2_init:1011: No niu hclk reset resource define
[    2.833936] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
[    2.833971] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    2.833994] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    2.834153] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[    2.834157] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[    2.834161] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[    2.834165] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    2.834168] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    2.834195] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    2.834325] mpp_rkvenc2 rkvenc-ccu: probing start
[    2.834330] mpp_rkvenc2 rkvenc-ccu: probing finish
[    2.834412] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    2.834423] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.834575] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    2.834590] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    2.834696] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    2.834761] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    2.834819] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    2.834829] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.835028] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    2.835042] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[    2.835171] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    2.835236] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    2.835632] mpp_av1dec: Adding child /av1d@fdc70000
[    2.835688] mpp_av1dec: register device av1d-master
[    2.835712] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    2.835728] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    2.835755] mpp_av1dec av1d-master: Adding to iommu group 16
[    2.835765] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.835948] mpp_av1dec av1d-master: probing start
[    2.836101] mpp_av1dec av1d-master: probing finish
[    2.836126] mpp_service mpp-srv: probe success
[    2.841870] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.841877] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.842558] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.842564] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.843243] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.843249] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.843548] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    2.843592] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    2.843631] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    2.843671] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    2.843708] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    2.844101] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.845016] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    2.845316] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 28, base_baud = 1500000) is a 16550A
[    2.845593] feb40000.serial: ttyS1 at MMIO 0xfeb40000 (irq = 87, base_baud = 1500000) is a 16550A
[    2.845783] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 88, base_baud = 1500000) is a 16550A
[    2.846702] random: fast init done
[    2.846798] random: crng init done
[    2.847288] rockchip-vop2 fdd90000.vop: Adding to iommu group 15
[    2.847302] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.851990] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.852003] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.852015] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.852023] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.852084] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -517
[    2.852262] [drm] failed to init overlay plane Cluster0-win1
[    2.852288] [drm] failed to init overlay plane Cluster1-win1
[    2.852312] [drm] failed to init overlay plane Cluster2-win1
[    2.852335] [drm] failed to init overlay plane Cluster3-win1
[    2.860035] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc011721660)
[    2.860527] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.860664] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc011729568)
[    2.860974] rockchip-drm display-subsystem: route-hdmi0: failed to get logo,offset
[    2.860981] rockchip-drm display-subsystem: can't not find any logo display
[    2.860986] rockchip-drm display-subsystem: failed to show kernel logo
[    2.861023] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    2.861062] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    2.861424] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    2.866408] brd: module loaded
[    2.869140] loop: module loaded
[    2.869322] zram: Added device: zram0
[    2.869438] lkdtm: No crash points registered, enable through debugfs
[    2.869737] system_heap: orders[0] = 6
[    2.869741] system_heap: orders[1] = 4
[    2.869744] system_heap: orders[2] = 0
[    2.871103] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    2.872010] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    2.872129] rk806 spi2.0: ON: 0x40 OFF:0x0
[    2.873736] vdd_gpu_s0: supplied by vcc5v0_sys
[    2.874730] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    2.875247] vdd_log_s0: supplied by vcc5v0_sys
[    2.875759] vdd_vdenc_s0: supplied by vcc5v0_sys
[    2.876326] vdd_ddr_s0: supplied by vcc5v0_sys
[    2.876659] vdd2_ddr_s3: supplied by vcc5v0_sys
[    2.877169] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    2.877632] vcc_3v3_s3: supplied by vcc5v0_sys
[    2.878074] vddq_ddr_s0: supplied by vcc5v0_sys
[    2.878584] vcc_1v8_s3: supplied by vcc5v0_sys
[    2.879087] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    2.879603] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    2.880059] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.880514] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    2.880970] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.881453] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.881978] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.882498] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    2.883017] vcc_3v3_s0: supplied by vcc5v0_sys
[    2.883460] vccio_sd_s0: supplied by vcc5v0_sys
[    2.883921] pldo6_s3: supplied by vcc5v0_sys
[    2.884317] rk806 spi2.0: no sleep-setting state
[    2.884322] rk806 spi2.0: no reset-setting pinctrl state
[    2.884326] rk806 spi2.0: no dvs-setting pinctrl state
[    2.885947] register firefly_spi_init spi return v = :0
[    2.886220] wireguard: allowedips self-tests: pass
[    2.890610] wireguard: nonce counter self-tests: pass
[    3.166108] wireguard: ratelimiter self-tests: pass
[    3.166198] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    3.166203] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    3.166554] tun: Universal TUN/TAP device driver, 1.6
[    3.166693] CAN device driver interface
[    3.167714] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    3.167859] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    3.167865] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    3.167871] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x45).
[    3.167875] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    3.167879] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    3.167892] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    3.167898] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    3.167903] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    3.167914] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    3.168131] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
[    3.168206] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    3.168212] rk_gmac-dwmac fe1b0000.ethernet:         DWMAC4/5
[    3.168218] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    3.168222] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    3.168226] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    3.168230] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    3.168267] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    3.168271] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.168276] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
[    3.168281] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    3.168286] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
[    3.305173] usbcore: registered new interface driver asix
[    3.305208] usbcore: registered new interface driver ax88179_178a
[    3.305222] usbcore: registered new interface driver cdc_ether
[    3.305234] usbcore: registered new interface driver net1080
[    3.305247] usbcore: registered new interface driver cdc_subset
[    3.305260] usbcore: registered new interface driver zaurus
[    3.305277] usbcore: registered new interface driver cdc_ncm
[    3.305291] usbcore: registered new interface driver qmi_wwan_q
[    3.305303] usbcore: registered new interface driver qmi_wwan
[    3.312564] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.312583] ehci-pci: EHCI PCI platform driver
[    3.312612] ehci-platform: EHCI generic platform driver
[    3.312796] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.312803] ohci-platform: OHCI generic platform driver
[    3.313096] usbcore: registered new interface driver cdc_acm
[    3.313100] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.313114] usbcore: registered new interface driver cdc_wdm
[    3.313145] usbcore: registered new interface driver usbserial_generic
[    3.313157] usbserial: USB Serial support registered for generic
[    3.313170] usbcore: registered new interface driver ch341
[    3.313178] usbserial: USB Serial support registered for ch341-uart
[    3.313190] usbcore: registered new interface driver cp210x
[    3.313199] usbserial: USB Serial support registered for cp210x
[    3.313211] usbcore: registered new interface driver ftdi_sio
[    3.313220] usbserial: USB Serial support registered for FTDI USB Serial Device
[    3.313232] usbcore: registered new interface driver keyspan
[    3.313241] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    3.313249] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    3.313258] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    3.313265] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    3.313277] usbcore: registered new interface driver option
[    3.313285] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.313298] usbcore: registered new interface driver oti6858
[    3.313307] usbserial: USB Serial support registered for oti6858
[    3.313318] usbcore: registered new interface driver pl2303
[    3.313327] usbserial: USB Serial support registered for pl2303
[    3.313339] usbcore: registered new interface driver qcserial
[    3.313348] usbserial: USB Serial support registered for Qualcomm USB modem
[    3.313359] usbcore: registered new interface driver sierra
[    3.313367] usbserial: USB Serial support registered for Sierra USB modem
[    3.313412] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[    3.313416] udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers
[    3.313738] [HXTP] himax_hx83102_init
[    3.313742] [HXTP] himax_hx83102_probe:Enter
[    3.313746] [HXTP] Himax common touch panel driver init
[    3.313786] usbcore: registered new interface driver usbtouchscreen
[    3.315178] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0
[    3.315788] i2c /dev entries driver
[    3.320013] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    3.329062] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    3.339105] vdd_npu_s0: supplied by vcc5v0_sys
[    3.347305] pca953x 6-0021: supply vcc not found, using dummy regulator
[    3.347461] pca953x 6-0021: using no AI
[    3.348973] rtc-hym8563 6-0051: could not init device, -6
[    3.351268] rkcifhw fdce0000.rkcif: Adding to iommu group 14
[    3.351324] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.351897] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
[    3.353445] rockchip-mipi-csi2: probe success, v4l2_dev:(efault)!
[    3.356370] usbcore: registered new interface driver uvcvideo
[    3.356387] USB Video Class driver (1.1.1)
[    3.360495] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    3.361454] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    3.362650] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[    3.362862] Bluetooth: HCI UART driver ver 2.3
[    3.362876] Bluetooth: HCI UART protocol H4 registered
[    3.362885] Bluetooth: HCI UART protocol ATH3K registered
[    3.362935] usbcore: registered new interface driver bfusb
[    3.364014] cpu cpu0: bin=0
[    3.364211] cpu cpu0: leakage=10
[    3.365766] cpu cpu0: pvtm=1428
[    3.365900] cpu cpu0: pvtm-volt-sel=1
[    3.367873] cpu cpu4: bin=0
[    3.368045] cpu cpu4: leakage=8
[    3.374493] cpu cpu4: pvtm=1671
[    3.378388] cpu cpu4: pvtm-volt-sel=3
[    3.381010] cpu cpu6: bin=0
[    3.381182] cpu cpu6: leakage=8
[    3.387643] cpu cpu6: pvtm=1658
[    3.391554] cpu cpu6: pvtm-volt-sel=3
[    3.393068] cpu cpu0: avs=0
[    3.393667] cpu cpu4: avs=0
[    3.394268] cpu cpu6: avs=0
[    3.394466] cpu cpu0: EM: created perf domain
[    3.394497] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[    3.39erf domain
[    3.395136] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    3.403604] cpu cpu6: EM: created perf domain
[    3.403949] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    3.417731] using random self ethernet address
[    3.417739] using random host ethernet address
[    3.417900] usb0: HOST MAC 52:e7:df:b9:7a:ba
[    3.417903] usb0: MAC 2e:35:0b:69:8b:13
[    3.417914] using random self ethernet address
[    3.417917] using random host ethernet 3] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    3.417947] g_ether gadget: g_ether ready
[    3.421462] sdhci: Secure Digital Host Controller Interface driver
[    3.421477] sdhci: Copyright(c) Pierre Ossman
[    3.421483] Synopsys Designware Multimedia Card Interface Driver
[    3.421717] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.423419] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    3.423468] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    3.424126] cryptodev: driver 1.12 loaded.
[    3.424179] hid: raw HID events driver (C) Jiri Kosina
[    3.424396] usbcore: registered new interface driver usbhid
[    3.424402] usbhid: USB HID core driver
[    3.432141] Firefly adc init
[    3.432156] Firefly adc-->FIREFLY_ADC_SAMPLE_JIFFIES:  16
[    3.432160] Firefly adc-->MSEC_PER_SEC:  1000
[    3.432165] Firefly adc-->HZ:  300
[    3.432322] Firefly adc-->ret:  0
[    3.432451] optee: probing for conduit method.
[    3.432468] optee: revision 3.13 (4542e1ef)
[    3.432878] optee: initialized driver
[    3.433324] usbcore: registered new interface driver snd-usb-audio
[    3.439613] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
[    3.441369] Initializing XFRM netlink socket
[    3.441612] NET: Registered protocol family 10
[    3.442476] Segment Routing with IPv6
[    3.442717] NET: Registered protocol family 17
[    3.442769] NET: Registered protocol family 15
[    3.442804] Bridge firewalling registered
[    3.442811] can: controller area network core
[    3.442840] NET: Registered protocol family 29
[    3.442846] can: raw protocol
[    3.442853] can: broadcast manager protocol
[    3.442862] can: netlink gateway - max_hops=1
[    3.443034] Bluetooth: RFCOMM TTY layer initialized
[    3.443043] Bluetooth: RFCOMM socket layer initialized
[    3.443066] Bluetooth: RFCOMM ver 1.11
[    3.443075] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.443081] Bluetooth: BNEP filters: protocol multicast
[    3.443089] Bluetooth: BNEP socket layer initialized
[    3.443095] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.443102] Bluetooth: HIDP socket layer initialized
[    3.443135] 8021q: 802.1Q VLAN Support v1.8
[    3.443150] [BT_RFKILL]: Enter rfkill_rk_init
[    3.443155] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.443552] Key type dns_resolver registered
[    3.444572] xc7160 3-001b: T-chip firefly camera driver version: 00.01.04
[    3.444611] xc7160 3-001b: Failed to get power-gpios, maybe no use
[    3.444698] xc7160 3-001b: supply avdd not found, using dummy regulator
[    3.444778] xc7160 3-001b: supply dovdd not found, using dummy regulator
[    3.444813] xc7160 3-001b: supply dvdd not found, using dummy regulator
[    3.444839] xc7160 3-001b: could not get default pinstate
[    3.444845] xc7160 3-001b: could not get sleep pinstate
[    3.444860] xc7160 3-001b: Success to get xc7160 endpoint data lanes, dts uses 4 lanes
[    3.454233] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    3.488946] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    3.489714] mmcblk0: mmc0:0001 Y2P064 58.2 GiB
[    3.489945] mmcblk0boot0: mmc0:0001 Y2P064 partition 1 4.00 MiB
[    3.490169] mmcblk0boot1: mmc0:0001 Y2P064 partition 2 4.00 MiB
[    3.490324] mmcblk0rpmb: mmc0:0001 Y2P064 partition 3 16.0 MiB, chardev (234:0)
[    3.494655]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    3.521688] dwc3 fc000000.usb: device reset
[    3.564194] rk3x-i2c feab0000.i2c: timeout, ipd: 0x90, state: 3
[    3.564221] xc7160 3-001b: write XC7160_REG_HIGH_SELECT failed
[    3.564498] xc7160: probe of 3-001b failed with error -5
[    3.564886] registered taskstats version 1
[    3.564895] Loading compiled-in X.509 certificates
[    3.565993] Btrfs loaded, crc32c=crc32c-generic
[    3.566087] pstore: Using crash dump compression: deflate
[    3.566587] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    3.566619] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.566787] rga: rga3_core0_irq, irq = 34, match scheduler
[    3.567132] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
[    3.567151] rga: rga3_core0 probe successfully
[    3.567482] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    3.567497] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.567631] rga: rga3_core1_irq, irq = 35, match scheduler
[    3.568050] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
[    3.568071] rga: rga3_core1 probe successfully
[    3.568386] rga: rga2_irq, irq = 36, match scheduler
[    3.568805] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[    3.568818] rga: rga2 probe successfully
[    3.569006] rga2_mmu: IOMMU binding successfully, default mapping core[0x1]
[    3.569150] rga: Module initialized. v1.2.20
[    3.569158]
[    3.569163] ********************************************************************
[    3.569169] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    3.569174] **                                                                **
[    3.569179] **  WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[    3.569184] **                                                                **
[    3.569188] ** This means that this kernel is built to expose clk operations  **
[    3.569193] ** such as parent or rate setting, enabling, disabling, etc.      **
[    3.569198] ** to userspace, which may compromise security on your system.    **
[    3.569202] **                                                                **
[    3.569207] ** If you see this message and you are not debugging the          **
[    3.569211] ** kernel, report this immediately to your vendor!                **
[    3.569216] **                                                                **
[    3.569220] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    3.569225] ********************************************************************
[    3.574901] vendor storage:20190527 ret = 0
[    3.604422] mali fb000000.gpu: Kernel DDK version g13p0-01eac0
[    3.604591] vcc5v0_host: supplied by vcc5v0_usb
[    3.605191] mali fb000000.gpu: leakage=14
[    3.605246] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    3.606041] vcc5v0_host3: supplied by vcc5v0_usb
[    3.607506] mali fb000000.gpu: pvtm=854
[    3.607588] mali fb000000.gpu: pvtm-volt-sel=2
[    3.608528] mali fb000000.gpu: avs=0
[    3.608641] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    3.609282] mali fb000000.gpu: GPU hardware issue table may need updating:
[    3.609282] r0p0 status 5 is unknown; treating as r0p0 status 0
[    3.609298] mali fb000000.gpu: GPU identified as 0x7 arch 1
                                                              [    3.609399] mali fb000000.gpu: No priority control manager is configured
[    3.609411] mali fb000000.gpu: No memory group manager is configured
[    3.609439] mali fb000000.gpu: Protected memory allocator not available
[    3.609972] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
[    3.610426] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    3.610816] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[    3.610832] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[    3.611096] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[    3.611335] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[    3.611573] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[    3.614267] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    3.615149] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
[    3.615335] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    3.616309] mali fb000000.gpu: Probed as mali0
[    3.625229] rockchip-dmc dmc: leakage=31
[    3.625268] rockchip-dmc dmc: leakage-volt-sel=0
[    3.625651] rockchip-dmc dmc: avs=0
[    3.625668] rockchip-dmc dmc: current ATF version 0x100
[    3.625787] rockchip-dmc dmc: normal_rate = 1560000000
[    3.625797] rockchip-dmc dmc: reboot_rate = 2112000000
[   : suspend_rate = 528000000
[    3.625814] rockchip-dmc dmc: video_4k_rate = 1560000000
[    3.625823] rockchip-dmc dmc: video_4k_10b_rate = 1560000000
[    3.625831] rockchip-dmc dmc: video_svep_rate = 1560000000
[    3.625840] rockchip-dmc dmc: boost_rate = 2112000000
[    3.625848] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
[    3.625856] rockchip-dmc dmc: performance_rate = 2112000000
[    3.625865] rockchip-dmc dmc: hdmirx_rate = 2112000000
[    3.625877] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[    3.625885] rockchip-dmc dmc: failed to get vop pn to msch rl
[    3.626025] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.626670] rockchip-dmc dmc: could not find power_model node
[    3.640525] using random self ethernet address
[    3.640560] using random host ethernet address
[    3.641707] usb1: HOST MAC 5a:8d:f3:33:10:33
[    3.641738] usb1: MAC 72:46:a7:14:0a:e3
[    3.641787] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
[    3.641798] g_cdc gadget: g_cdc ready
[    3.643033] input: adc-keys as /devices/platform/adc-keys/input/input2
[    3.650789] dwc3 fc000000.usb: device disconnect
[    3.653535] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    3.653682] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 1
[    3.653755] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
[    3.711858] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    3.711916] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.711937] usb usb1: Product: Generic Platform OHCI controller
[    3.711954] usb usb1: Manufacturer: Linux 5.10.110 ohci_hcd
[    3.711971] usb usb1: SerialNumber: fc8c0000.usb
[    3.712907] hub 1-0:1.0: USB hub found
[    3.712978] hub 1-0:1.0: 1 port detected
[    3.715963] ehci-platform fc880000.usb: EHCI Host Controller
[    3.716189] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    3.716267] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
[    3.727425] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    3.727559] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.727567] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.727576] usb usb2: Product: EHCI Host Controller
[    3.727585] usb usb2: Manufacturer: Linux 5.10.110 ehci_hcd
[    3.727592] usb usb2: SerialNumber: fc880000.usb
[    3.727941] hub 2-0:1.0: USB hub found
[    3.728040] hub 2-0:1.0: 1 port detected
[    3.732912] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    3.733708] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    3.733955] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
[    3.795388] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    3.795468] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.795498] usb usb3: Product: Generic Platform OHCI controller
[    3.795525] usb usb3: Manufacturer: Linux 5.10.110 ohci_hcd
[    3.795552] usb usb3: SerialNumber: fc840000.usb
[    3.797175] hub 3-0:1.0: USB hub found
[    3.797277] hub 3-0:1.0: 1 port detected
[    3.800255] ehci-platform fc800000.usb: EHCI Host Controller
[    3.800992] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 4
[    3.801495] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
[    3.814338] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    3.815008] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.815072] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.815104] usb usb4: Product: EHCI Host Controller
[    3.815131] usb usb4: Manufacturer: Linux 5.10.110 ehci_hcd
[    3.815158] usb usb4: SerialNumber: fc800000.usb
[    3.816804] hub 4-0:1.0: USB hub found
[    3.816891] hub 4-0:1.0: 1 port detected
[    3.821929] register spi return v = :0
[    3.824431] RKNPU fdab0000.npu: Adding to iommu group 0
[    3.824466] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.824624] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    3.825680] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    3.825702] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    3.825716] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    3.825758] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 76,32 bit host data width,256 deep fifo
[    3.825846] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    3.825882] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    3.825899] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    3.826559] [drm] Initialized rknpu 0.8.2 20220829 for fdab0000.npu on minor 1
[    3.829908] RKNPU fdab0000.npu: leakage=8
[    3.829994] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[    3.836745] RKNPU fdab0000.npu: pvtm=849
[    3.840925] RKNPU fdab0000.npu: pvtm-volt-sel=2
[    3.842243] RKNPU fdab0000.npu: avs=0
[    3.842581] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    3.842662] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.853760] RKNPU fdab0000.npu: failed to find power_model node
[    3.853808] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    3.853825] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    3.862572] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.869763] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.871253] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    3.872003] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '17:07:37', on 'Jan 12 2023'.
[    3.872329] Mali:
[    3.872332] Mali device driver loaded
[    3.873434] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.873446] cfg80211: failed to load regulatory.db
[    3.879093] ret 1024 0
[    3.879426] ALSA device list:
[    3.879442]   #0: rockchip-hdmi0
[    3.884419] Freeing unused kernel memory: 7616K
[    3.900833] Run /init as init process
Loading, please wait...
/dev/console is Ok
starting version 237
[    4.514860] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    4.515093] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    4.515264] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000082002010010
[    4.515307] xhci-hcd xhci-hcd.5.auto: irq 110, io mem 0xfc000000
[    4.515607] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    4.515620] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.515631] usb usb5: Product: xHCI Host Controller
[    4.515641] usb usb5: Manufacturer: Linux 5.10.110 xhci-hcd
[    4.515651] usb usb5: SerialNumber: xhci-hcd.5.auto
[    4.516143] hub 5-0:1.0: USB hub found
[    4.516180] hub 5-0:1.0: 1 port detected
[    4.516503] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    4.516659] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    4.516679] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[    4.516739] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.516828] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    4.516840] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.516850] usb usb6: Product: xHCI Host Controller
[    4.516862] usb usb6: Manufacturer: Linux 5.10.110 xhci-hcd
[    4.516872] usb usb6: SerialNumber: xhci-hcd.5.auto
[    4.517258] hub 6-0:1.0: USB hub found
[    4.517289] hub 6-0:1.0: 1 port detected
[    4.827625] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[    4.968675] usb 5-1: New USB device found, idVendor=23a9, idProduct=ef18, bcdDevice= 1.00
[    4.968774] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    4.968802] usb 5-1: Product: DISK
[    4.968827] usb 5-1: Manufacturer: USB
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36.1-4309-dirty
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p6] fsck.ext4 -a -C0 /dev/mmcblk0p6
Ubuntu20.04: clean, 100703/212992 files, 732188/832914 blocks
done.
[    5.814938] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Warning: overlayroot: configuring overlayroot with driver=overlay mode=device opts='dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' per kernel cmdline
[    5.984771] EXT4-fs (mmcblk0p7): 4 orphan inodes deleted
[    5.984814] EXT4-fs (mmcblk0p7): recovery complete
[    5.987508] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
Success: overlayroot: configured root with 'device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' using overlay per kernel cmdline
Warning: Something odd, no /lib/modules/5.10.110 in initramfs.
done.
[    6.098363] EXT4-fs (mmcblk0p3): recovery complete
[    6.098860] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    6.269642] systemd[1]: System time before build time, advancing clock.
[    6.282877] systemd[1]: Failed to find module 'autofs4'
[    6.385878] systemd[1]: systemd 245.4-4ubuntu4.0firefly1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    6.386620] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 20.04.5 LTS!

[    6.389685] systemd[1]: Set hostname to <firefly>.
[    6.626717] systemd[1]: Created slice system-modprobe.slice.
[  OK  ] Created slice system-modprobe.slice.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Reached target User and Group Name Lookups.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target Slices.
[  OK  ] Reached target Swap.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on udev Kernel Socket.
[    6.627866] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.628416] systemd[1]: Created slice User and Session Slice.
[    6.628696] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[            Mounting Huge Pages File System...
6.629354] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
[    6.629444] systemd[1]: Reached target User and Group Name Lookups.
[    6.629878] systemd[1]: R         Mounting POSeIX Message Queue File System...
ached target Remote File Systems.
[    6.630421] systemd[1]: Reached target Slices.
[    6.630843] systemd[1]: Reached target Swap.
[    6.631472] systemd[1]: Listening on Syslog Socket.
[         Mounting Kernel Debug File System...
    6.631799] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    6.632630] systemd[1]: Listening on Journal Audit Socket.
[    6.632963] systemd[1]: Listening on Journal Socket (/dev/log).
[          Mounting Ker nel Trace File System...
  6.633538] systemd[1]: Listening on Journal Socket.
[    6.634032] systemd[1]: Listening on udev Control Socket.
[    6.634463] systemd[1]: Listening on udev Kernel Socket.
[    6.636702] systemd[1]: Mounting Huge Pages File System...
[    6.638927] systemd[1]: Mounti         Starting Journal Service...
ng POSIX Message Queue File System...
[    6.640975] systemd[1]: Mounting Kernel Debug File System...
[    6.642764] systemd[1]: Mounting Kernel Trace File System...
[    6.645264] systemd[1]: Starting Journ         Starting Set the console keyboard layout 0m...
l Service...
[    6.647366] systemd[1]: Starting Set the console keyboard layout...
[    6.649687] systemd[1]: Starting Create list of static device nod         Starting Creeate list of st…odes for the current kernel...
s for the current kernel...
[    6.650439] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    6.651421] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    6.653569] systemd[1]: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
         Starting Remount Root and Kernel File Systems...
[    6.655529] systemd[1]: Starting Remount Root and Kernel File Systems...
[    6.657247] systemd[1]: Starting udev Coldplug   a l l   D e v iStarting udev Coldplug all Devices...
ces...
[    6.660372] systemd[1]: Mounted Huge Pages File System.
[  OK  ] Mounted Huge Pages File System.
POSIX Message Queue File SyMounted POSIX Message Queue File Sys[t[0;32m  OK  ] Mounted
                           stem.
[    6.663251] systemd[1]: Mounted Kernel Debug File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted Kernel Trace File System.
[    6.664378] systemd[1]: Mounted Kernel Trace File System.
[  OK  ] Finished Create list of st… nodes for the current kernel.
[    6.665481] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    6.673510] systemd[1]: Finished Remount Root and Kernel File Sys[  OK  ] Finished [0;1;39mRemount Root and Kerneel File Systems.
ms.
[    6.676625] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    6.676726] systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
[    6.678480] systemd[1]: Starting Load/Save Random Seed...
         Starting Load/Save Random Seed...
[    6.680686] systemd[1]: Starting Create System Users...
         Starting Create System Users...
[    6.682099] systemd[1]: Finished Load Kernel Modules.
[  OK  ] Finished Load Kernel Modules.
[    6.684633] systemd[1]: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[    6.686832] systemd[1]: Mounting Kernel Configuration File System         Mounting K.ernel Configuration File Sys..tem...

         Starting Apply Kernel Variables...
[    6.689051] systemd[1]: Starting Apply Kernel Variables...
[    6.701734] systemd[1]: Finished Load/Save Random Seed.
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Finished Create System Users.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Finished Apply Kernel Variables.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Finished Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
[  OK  ] Finished Set the console keyboard layout.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Set console font and keymap...
         Starting Tell Plymouth To Write Out Runtime Data...
[  OK  ] Finished Set console font and keymap.
[  OK  ] Finished Tell Plymouth To Write Out Runtime Data.
[  OK  ] Finished Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
[  OK  ] Finished udev Coldplug all Devices.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Network Name Resolution...
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Finished Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Started CUPS Scheduler.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Ubuntu Advantage Timer for running repeated jobs.
[  OK  ] Reached target Paths.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Trigger anacron every hour.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[  OK  ] Started Discard unused blocks once a week.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily man-db regeneration.
[  OK  ] Reached target Timers.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on CUPS Scheduler.
[  OK  ] Listening on D-Bus System Message Bus Socket.
         Starting Socket activation for snappy daemon.
[  OK  ] Listening on Socket activation for snappy daemon.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Accounts Service...
         Starting Adbd for linux...
[  OK  ] Started Run anacron jobs.
         Starting LSB: automatic crash report generation...
         Starting enable ASYNC for Debian Display...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Bluetooth management mechanism...
[  OK  ] Started CUPS Scheduler.
[  OK  ] Started D-Bus System Message Bus.
         Starting Network Manager...
[  OK  ] Started Save initial kernel messages after boot.
         Starting Remove Stale Onli…t4 Metadata Check Snapshots...
[  OK  ] Started start firefly-fan service.
[  OK  ] Started Set the CPU Frequency Scaling governor.
         Starting Authorization Manager...
         Starting Restore /etc/reso… the ppp link was shut down...
         Starting rkisp 3A engine...
[  OK  ] Started start rknn_server service.
         Starting System Logging Service...
[  OK  ] Reached target Login Prompts (Pre).
         Starting Snap Daemon...
         Starting Login Service...
         Starting Disk Manager...
         Starting WPA supplicant...
[  OK  ] Finished Restore /etc/reso…re the ppp link was shut down.
[  OK  ] Found device /dev/ttyFIQ0.
[  OK  ] Started rkisp 3A engine.
[  OK  ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[  OK  ] Started Network Name Resolution.
[  OK  ] Reached target Host and Network Name Lookups.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
         Starting Save/Restore Sound Card State...
[  OK  ] Started enable ASYNC for Debian Display.
[  OK  ] Started LSB: automatic crash report generation.
[  OK  ] Started System Logging Service.
[  OK  ] Finished Save/Restore Sound Card State.
[  OK  ] Reached target Sound Card.
[  OK  ] Started Login Service.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started WPA supplicant.
[  OK  ] Started Authorization Manager.
         Starting Modem Manager...
         Starting Hostname Service...
[  OK  ] Started Hostname Service.
[  OK  ] Started Accounts Service.
         Starting Network Manager Script Dispatcher Service...
[  OK  ] Started Network Manager Script Dispatcher Service.
[  OK  ] Started Network Manager.
[  OK  ] Reached target Network.
         Starting Net-Smp-Affinity...
         Starting OpenVPN service...
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
[  OK  ] Started Net-Smp-Affinity.
[  OK  ] Finished OpenVPN service.
[  OK  ] Started Modem Manager.
[  OK  ] Finished Permit User Sessions.
         Starting GNOME Display Manager...
         Starting Hold until boot process finishes up...
[  OK  ] Started Disk Manager.
[  OK  ] Finished Hold until boot process finishes up.
[  OK  ] Started Serial Getty on ttyFIQ0.
[  OK  ] Reached target Login Prompts.
         Starting Set console scheme...
[  OK  ] Finished Set console scheme.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Started Snap Daemon.
         Starting Wait until snapd is fully seeded...
[  OK  ] Started OpenBSD Secure Shell server.
         Starting Time & Date Service...
[  OK  ] Started GNOME Display Manager.
[  OK  ] Started Time & Date Service.
[  OK  ] Finished Wait until snapd is fully seeded.
[    8.217481] sd 0:0:0:0: [sda] No Caching mode page found
[    8.217497] sd 0:0:0:0: [sda] Assuming drive cache: write through
[FAILED] Failed to start Adbd for linux.
See 'systemctl status adbd.service' for details.
[  OK  ] Started Setup rockchip platform environment.
[  OK  ] Created slice User Slice of UID 1000.
         Starting User Runtime Directory /run/user/1000...
[  OK  ] Finished User Runtime Directory /run/user/1000.
         Starting User Manager for UID 1000...
[  OK  ] Started Bluetooth management mechanism.
[  OK  ] Reached target Multi-User System.
[  OK  ] Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
[  OK  ] Finished Update UTMP about System Runlevel Changes.
[  OK  ] Started User Manager for UID 1000.
[  OK  ] Started Session 1 of user firefly.

Ubuntu 20.04.5 LTS firefly ttyFIQ0

firefly login: root (automatic login)

_____ _           __ _
|  ___(_)_ __ ___ / _| |_   _
| |_  | | '__/ _ \ |_| | | | |
|  _| | | | |  __/  _| | |_| |
|_|   |_|_|  \___|_| |_|\__, |
                        |___/
Welcome to Ubuntu 20.04.5 LTS (GNU/Linux 5.10.110 aarch64)

* Documentation:  http://wiki.t-firefly.com
* Management:     http://www.t-firefly.com

System information as of Mon Jun 28 09:40:31 UTC 2021

System load:   0.16 0.03 0.01   Up time:       0 min
Memory usage:  3 % of 7409MB    IP:
Usage of /:    1% of 51G

Last login: Mon Jun 28 09:40:31 UTC 2021 on ttyFIQ0
root@firefly:~# ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether fa:98:db:46:3f:69  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 74

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 241  bytes 21071 (21.0 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 241  bytes 21071 (21.0 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@firefly:~# ifconfig -a
dummy0: flags=130<BROADCAST,NOARP>  mtu 1500
        ether c6:35:36:24:9a:29  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether fa:98:db:46:3f:69  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 74

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 242  bytes 21138 (21.1 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 242  bytes 21138 (21.1 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

usb1: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 72:46:a7:14:0a:e3  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@firefly:~#


方式1.png (31.15 KB, 下载次数: 149)

方式1.png
回复

使用道具 举报

94

积分

0

威望

0

贡献

技术小白

积分
94
发表于 2023-1-16 14:48:33        只看该作者  6#
zhangzhenzhao 发表于 2023-1-12 15:14
可以复现问题抓份开机log,上层和内核的都提供看看

还有这个应该也要添加吧

DDR Version V1.08 20220617
LPDDR4, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
Manufacturer ID:0xff
CH0 RX Vref:28.7%, TX Vref:12.2%,0.0%
CH1 RX Vref:27.7%, TX Vref:12.2%,0.0%
CH2 RX Vref:28.7%, TX Vref:12.2%,0.0%
CH3 RX Vref:27.7%, TX Vref:12.2%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(ce2098067b...) + OK
## Checking uboot 0x00200000 ... sha256(77b6741b0d...) + OK
## Checking fdt 0x0035b2f8 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(ebc45c531e...) + OK
## Checking atf-3 0xff100000 ... sha256(9ded9f3bb5...) + OK
## Checking optee 0x08400000 ... sha256(fde0860845...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 119.429 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-444-g1450d21e8:derrick.huang
NOTICE:  BL31: Built : 16:25:50, Oct 12 2022
INFO:    spec: 0x1
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC:
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09(u-boot commit id: e8b5ef0c39)(sdk version: rk3588_linux_release_20221012_v1.0.2a)-ge8b5ef0c39 #root (Jan 16 2023 - 14:04:55 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: eda1c000
Relocation fdt: eb9f9fb8 - eb9fecc0
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: recovery (misc)
FIT: no signed, no conf required
=================begin===================
162383 bytes read in 8 ms (19.4 MiB/s)
DTB(Distro): rk-kernel.dtb
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
I2c6 speed: 400000Hz
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Firefly ITX-3588J HDMI(Linux)
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
hdmi@fde80000 disconnected
CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 594000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "recovery"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image at 0xe6cc5380 with size 0x04b33c00
Fdt Ramdisk skip relocation
## Loading kernel from FIT Image at e6cc5380 ...
   Using 'conf' configuration
## Verified-boot: 0
   Trying 'kernel' kernel subimage
     Description:  unavailable
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0xe6ced780
     Data Size:    41757184 Bytes = 39.8 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x00400000
     Entry Point:  0x00400000
     Hash algo:    sha256
     Hash value:   8c5f1989ad43740e2f4f95131c29e0748e28bd922166bd1e9997301f3a81e64a
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at e6cc5380 ...
   Using 'conf' configuration
   Trying 'ramdisk' ramdisk subimage
     Description:  unavailable
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0xe94c0180
     Data Size:    36932945 Bytes = 35.2 MiB
     Architecture: AArch64
     OS:           Linux
     Load Address: 0x0a200000
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   993174280a559715c65c49c171ee705cba9c0043aa3dcea430d4bae4a474bb1e
   Verifying Hash Integrity ... sha256+ OK
   Loading ramdisk from 0xe94c0180 to 0x0a200000
## Loading fdt from FIT Image at e6cc5380 ...
   Using 'conf' configuration
   Trying 'fdt' fdt subimage
     Description:  unavailable
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0xe6cc5b80
     Data Size:    162383 Bytes = 158.6 KiB
     Architecture: AArch64
     Load Address: 0x08300000
     Hash algo:    sha256
     Hash value:   025c137c03bccb6717869dc032928c615dc2ead041d08e676cebce3337e96ff6
   Verifying Hash Integrity ... sha256+ OK
   Loading fdt from 0x08300000 to 0x08300000
   Booting using the fdt blob at 0x08300000
   Loading Kernel Image from 0xe6ced780 to 0x00400000 ... OK
   kernel loaded at 0x00400000, end = 0x02bd2a00
  'reserved-memory' cma: addr=10000000 size=10000000
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000832aa4e
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 999.728 ms

Starting kernel ...

[    1.129208] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    1.129233] Linux version 5.10.110 (root@zh-virtual-machine) (kernel commit id: 4a55b55733a0) (sdk version: rk3588_linux_release_20221012_v1.0.2a) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #5 SMP Fri Jan 13 16:43:37 CST 2023
[    1.136786] Machine model: Firefly ITX-3588J HDMI(Linux)
[    1.136867] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    1.141711] printk: bootconsole [uart8250] enabled
[    1.143925] efi: UEFI not found.
[    1.148275] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    1.149427] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[    1.150167] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    1.265745] Zone ranges:
[    1.265991]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    1.266565]   DMA32    empty
[    1.266833]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    1.267402] Movable zone start for each node
[    1.267794] Early memory node ranges
[    1.268125]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    1.268701]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    1.269277]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    1.269855] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    1.317216] psci: probing for conduit method from DT.
[    1.317686] psci: PSCIv1.1 detected in firmware.
[    1.318111] psci: Using standard PSCI v0.2 function IDs
[    1.318593] psci: Trusted OS migration not required
[    1.319044] psci: SMC Calling Convention v1.2
[    1.319845] percpu: Embedded 32 pages/cpu s93160 r8192 d29720 u131072
[    1.320648] Detected VIPT I-cache on CPU0
[    1.321054] CPU features: detected: GIC system register CPU interface
[    1.321646] CPU features: detected: Virtualization Host Extensions
[    1.322218] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    1.322864] alternatives: patching kernel code
[    1.325434] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[    1.326072] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  storagenode=/mmc@fe2e0000 androidboot.verifiedbootstate=orange ro rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    1.330593] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    1.331722] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    1.332441] mem auto-init: stack:off, heap alloc:off, heap free:off
[    1.339332] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)
[    1.404789] Memory: 7544028K/8108032K available (22336K kernel code, 3786K rwdata, 6892K rodata, 7616K init, 656K bss, 301860K reserved, 262144K cma-reserved)
[    1.406207] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    1.406834] ftrace: allocating 67468 entries in 264 pages
[    1.505959] ftrace: allocated 264 pages with 2 groups
[    1.506687] rcu: Hierarchical RCU implementation.
[    1.507124] rcu:     RCU event tracing is enabled.
[    1.507542]  Rude variant of Tasks RCU enabled.
[    1.507958]  Tracing variant of Tasks RCU enabled.
[    1.508399] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.514203] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.516652] GICv3: GIC: Using split EOI/Deactivate mode
[    1.517136] GICv3: 480 SPIs implemented
[    1.517489] GICv3: 0 Extended SPIs implemented
[    1.517922] GICv3: Distributor has no Range Selector support
[    1.518447] GICv3: 16 PPIs implemented
[    1.518833] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.519568] ITS [mem 0xfe640000-0xfe65ffff]
[    1.519997] ITS@0x00000000fe640000: allocated 8192 Devices @100220000 (indirect, esz 8, psz 64K, shr 0)
[    1.520876] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100230000 (flat, esz 2, psz 64K, shr 0)
[    1.521827] ITS: using cache flushing for cmd queue
[    1.522303] ITS [mem 0xfe660000-0xfe67ffff]
[    1.522726] ITS@0x00000000fe660000: allocated 8192 Devices @100250000 (indirect, esz 8, psz 64K, shr 0)
[    1.523604] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100260000 (flat, esz 2, psz 64K, shr 0)
[    1.524554] ITS: using cache flushing for cmd queue
[    1.525134] GICv3: using LPI property table @0x0000000100270000
[    1.525788] GIC: using cache flushing for LPI property table
[    1.526312] GICv3: CPU0: using allocated LPI pending table @0x0000000100280000
[    1.527122] random: get_random_bytes called from start_kernel+0x3f0/0x65c with crng_init=0
[    1.636977] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.638250] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.639209] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.640830] Console: colour dummy device 80x25
[    1.641249] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.642159] pid_max: default: 32768 minimum: 301
[    1.642657] LSM: Security Framework initializing
[    1.643128] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.643812] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.646038] rcu: Hierarchical SRCU implementation.
[    1.647255] Platform MSI: msi-controller@fe640000 domain created
[    1.648602] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.649350] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.650186] EFI services will not be available.
[    1.650862] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.652410] Detected VIPT I-cache on CPU1
[    1.652438] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.652453] GICv3: CPU1: using allocated LPI pending table @0x0000000100290000
[    1.652496] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.653691] Detected VIPT I-cache on CPU2
[    1.653713] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.653727] GICv3: CPU2: using allocated LPI pending table @0x00000001002a0000
[    1.653764] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.654924] Detected VIPT I-cache on CPU3
[    1.654942] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.654956] GICv3: CPU3: using allocated LPI pending table @0x00000001002b0000
[    1.654991] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.656160] CPU features: detected: Spectre-v4
[    1.656163] CPU features: detected: Spectre-BHB
[    1.656165] Detected PIPT I-cache on CPU4
[    1.656176] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.656184] GICv3: CPU4: using allocated LPI pending table @0x00000001002c0000
[    1.656207] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.657324] Detected PIPT I-cache on CPU5
[    1.657336] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.657343] GICv3: CPU5: using allocated LPI pending table @0x00000001002d0000
[    1.657367] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.658496] Detected PIPT I-cache on CPU6
[    1.658508] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.658515] GICv3: CPU6: using allocated LPI pending table @0x00000001002e0000
[    1.658538] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.659651] Detected PIPT I-cache on CPU7
[    1.659663] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.659670] GICv3: CPU7: using allocated LPI pending table @0x00000001002f0000
[    1.659693] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.659747] smp: Brought up 1 node, 8 CPUs
[    1.676226] SMP: Total of 8 processors activated.
[    1.676649] CPU features: detected: Privileged Access Never
[    1.677144] CPU features: detected: User Access Override
[    1.677617] CPU features: detected: 32-bit EL0 Support
[    1.678076] CPU features: detected: Common not Private translations
[    1.678630] CPU features: detected: RAS Extension Support
[    1.679109] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.679874] CPU features: detected: CRC32 instructions
[    1.680335] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.680951] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.681532] CPU: All CPU(s) started at EL2
[    1.684006] devtmpfs: initialized
[    1.692221] Registered cp15_barrier emulation handler
[    1.692677] Registered setend emulation handler
[    1.693151] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.694021] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.694749] pinctrl core: initialized pinctrl subsystem
[    1.695422] DMI not present or invalid.
[    1.695864] NET: Registered protocol family 16
[    1.696747] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.697446] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.698154] audit: initializing netlink subsys (disabled)
[    1.698688] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1
[    1.699118] thermal_sys: Registered thermal governor 'fair_share'
[    1.699381] thermal_sys: Registered thermal governor 'step_wise'
[    1.699928] thermal_sys: Registered thermal governor 'user_space'
[    1.700462] thermal_sys: Registered thermal governor 'power_allocator'
[    1.701112] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.702422] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.703155] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.703892] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.704626] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.705358] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.706084] cpuidle: using governor menu
[    1.706438] Registered FIQ tty driver
[    1.706872] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.707567] ASID allocator initialised with 65536 entries
[    1.709044] ramoops: dmesg-0 0x20000@0x0000000000110000
[    1.709517] ramoops: console 0x80000@0x0000000000130000
[    1.709995] ramoops: pmsg    0x50000@0x00000000001b0000
[    1.710665] printk: console [ramoops-1] enabled
[    1.711067] pstore: Registered ramoops as persistent store backend
[    1.711615] ramoops: using 0xf0000@0x110000, ecc: 0
[    1.743290] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.744054] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.744788] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.745536] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.746295] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.746894] rockchip-pinctrl pinctrl: probed pinctrl
[    1.753492] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    1.754091] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    1.754685] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.755279] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    1.813846] raid6: neonx8   gen()  5619 MB/s
[    1.870577] raid6: neonx8   xor()  4438 MB/s
[    1.927313] raid6: neonx4   gen()  5523 MB/s
[    1.984043] raid6: neonx4   xor()  4718 MB/s
[    2.040774] raid6: neonx2   gen()  5361 MB/s
[    2.097509] raid6: neonx2   xor()  4429 MB/s
[    2.154243] raid6: neonx1   gen()  4372 MB/s
[    2.210974] raid6: neonx1   xor()  3630 MB/s
[    2.267704] raid6: int64x8  gen()  2633 MB/s
[    2.324441] raid6: int64x8  xor()  1559 MB/s
[    2.381172] raid6: int64x4  gen()  2948 MB/s
[    2.437906] raid6: int64x4  xor()  1568 MB/s
[    2.494637] raid6: int64x2  gen()  2515 MB/s
[    2.551370] raid6: int64x2  xor()  1358 MB/s
[    2.608100] raid6: int64x1  gen()  2061 MB/s
[    2.664832] raid6: int64x1  xor()  1083 MB/s
[    2.665212] raid6: using algorithm neonx8 gen() 5619 MB/s
[    2.665692] raid6: .... xor() 4438 MB/s, rmw enabled
[    2.666134] raid6: using neon recovery algorithm
[    2.667005] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    2.667496] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    2.668009] fiq_debugger_probe: could not install nmi irq handler
[[    2.668595] printk: console [ttyFIQ0] enabled
    2.668595] printk: console [ttyFIQ0] enabled
[    2.669360] printk: bootconsole [uart8250] disabled
[    2.669360] printk: bootconsole [uart8250] disabled
[    2.669868] Registered fiq debugger ttyFIQ0
[    2.670147] vcc5v0_sys: supplied by vcc12v_dcin
[    2.670239] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    2.670326] vcc5v0_usb: supplied by vcc12v_dcin
[    2.670409] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    2.670695] iommu: Default domain type: Passthrough
[    2.670755] rk_iommu fdab9000.iommu: version = 2
[    2.671029] rk_iommu fdb50800.iommu: version = 2
[    2.671223] rk_iommu fdb60f00.iommu: version = 2
[    2.671363] rk_iommu fdb70f00.iommu: version = 2
[    2.671494] rk_iommu fdb90480.iommu: version = 2
[    2.671649] rk_iommu fdba0800.iommu: version = 2
[    2.671800] rk_iommu fdba4800.iommu: version = 2
[    2.671971] rk_iommu fdba8800.iommu: version = 2
[    2.672125] rk_iommu fdbac800.iommu: version = 2
[    2.672276] rk_iommu fdbb0800.iommu: version = 2
[    2.672427] rk_iommu fdbdf000.iommu: version = 2
[    2.672640] rk_iommu fdbef000.iommu: version = 2
[    2.672869] rk_iommu fdc38700.iommu: version = 2
[    2.673104] rk_iommu fdc48700.iommu: version = 2
[    2.673278] rk_iommu fdce0800.iommu: version = 2
[    2.673366] rk_iommu fdd97e00.iommu: version = 2
[    2.673605] usbcore: registered new interface driver usbfs
[    2.673619] usbcore: registered new interface driver hub
[    2.673631] usbcore: registered new device driver usb
[    2.673660] mc: Linux media interface: v0.10
[    2.673669] videodev: Linux video capture interface: v2.00
[    2.673689] pps_core: LinuxPPS API ver. 1 registered
[    2.673692] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.673698] PTP clock support registered
[    2.673899] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    2.673929] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    2.674753] Advanced Linux Sound Architecture Driver Initialized.
[    2.674923] Bluetooth: Core ver 2.22
[    2.674933] NET: Registered protocol family 31
[    2.674936] Bluetooth: HCI device and connection manager initialized
[    2.674941] Bluetooth: HCI socket layer initialized
[    2.674945] Bluetooth: L2CAP socket layer initialized
[    2.674952] Bluetooth: SCO socket layer initialized
[    2.676211] rockchip-cpuinfo cpuinfo: SoC            : 35880000
[    2.676216] rockchip-cpuinfo cpuinfo: Serial         : b82e58b2f6342537
[    2.676471] clocksource: Switched to clocksource arch_sys_counter
[    2.938516] NET: Registered protocol family 2
[    2.938620] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    2.940534] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    2.940625] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.940955] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    2.941716] TCP: Hash tables configured (established 65536 bind 65536)
[    2.941761] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.941912] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.942106] NET: Registered protocol family 1
[    2.942360] RPC: Registered named UNIX socket transport module.
[    2.942364] RPC: Registered udp transport module.
[    2.942367] RPC: Registered tcp transport module.
[    2.942370] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.942681] PCI: CLS 0 bytes, default 64
[    2.942885] Trying to unpack rootfs image as initramfs...
[    3.491668] Freeing initrd memory: 36064K
[    3.492265] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    3.492716] kvm [1]: IPA Size Limit: 40 bits
[    3.492728] kvm [1]: GICv3: no GICV resource entry
[    3.492732] kvm [1]: disabling GICv2 emulation
[    3.492735] kvm [1]: GIC system register CPU interface enabled
[    3.492831] kvm [1]: vgic interrupt IRQ9
[    3.492953] kvm [1]: VHE mode initialized successfully
[    3.495326] Initialise system trusted keyrings
[    3.495402] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    3.497285] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.497522] NFS: Registering the id_resolver key type
[    3.497531] Key type id_resolver registered
[    3.497535] Key type id_legacy registered
[    3.497541] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    3.498103] Key type cifs.spnego registered
[    3.498110] Key type cifs.idmap registered
[    3.498115] ntfs: driver 2.1.32 [Flags: R/O].
[    3.498165] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
[    3.498246] fuse: init (API version 7.32)
[    3.498384] SGI XFS with security attributes, no debug enabled
[    3.518980] NET: Registered protocol family 38
[    3.518989] xor: measuring software checksum speed
[    3.520386]    8regs           :  7097 MB/sec
[    3.521544]    32regs          :  8524 MB/sec
[    3.522413]    arm64_neon      : 11405 MB/sec
[    3.522418] xor: using function: arm64_neon (11405 MB/sec)
[    3.522423] Key type asymmetric registered
[    3.522427] Asymmetric key parser 'x509' registered
[    3.522441] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    3.522513] io scheduler mq-deadline registered
[    3.522519] io scheduler kyber registered
[    3.522980] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
[    3.523205] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[    3.524897] rockchip-usb2phy fd5d8000.syscon:usb2-phy@8000: failed to create phy
[    3.525242] rockchip-usb2phy fd5dc000.syscon:usb2-phy@c000: failed to create phy
[    3.525697] rockchip-usb2phy fd5d4000.syscon:usb2-phy@4000: failed to create phy
[    3.527105] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    3.527944] Firefly gpio driver init!
[    3.528017] Firefly gpio driver register return : 0
[    3.528869] iep: Module initialized.
[    3.528896] mpp_service mpp-srv: 75e32fd43421 author: daijh 2022-11-02 Merge branch 'rk3588/rockchip' into rk3588/firefly
[    3.528900] mpp_service mpp-srv: probe start
[    3.530193] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    3.530214] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.530383] mpp_vdpu2 fdb50400.vdpu: probe device
[    3.530470] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    3.530476] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    3.530578] mpp_vdpu2 fdb50400.vdpu: probing finish
[    3.530735] mpp_vepu2 jpege-ccu: probing start
[    3.530739] mpp_vepu2 jpege-ccu: probing finish
[    3.530818] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    3.530828] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.530951] mpp_vepu2 fdba0000.jpege-core: probing start
[    3.531029] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    3.531110] mpp_vepu2 fdba0000.jpege-core: probing finish
[    3.531184] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    3.531195] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.531316] mpp_vepu2 fdba4000.jpege-core: probing start
[    3.531393] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    3.531471] mpp_vepu2 fdba4000.jpege-core: probing finish
[    3.531542] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    3.531551] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.531689] mpp_vepu2 fdba8000.jpege-core: probing start
[    3.531763] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    3.531868] mpp_vepu2 fdba8000.jpege-core: probing finish
[    3.531941] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    3.531950] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.532069] mpp_vepu2 fdbac000.jpege-core: probing start
[    3.532142] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    3.532231] mpp_vepu2 fdbac000.jpege-core: probing finish
[    3.532432] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    3.532442] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.532562] mpp-iep2 fdbb0000.iep: probe device
[    3.532655] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    3.532740] mpp-iep2 fdbb0000.iep: probing finish
[    3.532896] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    3.532905] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.533076] mpp_jpgdec fdb90000.jpegd: probe device
[    3.533255] mpp_jpgdec fdb90000.jpegd: probing finish
[    3.533531] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    3.533575] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    3.533633] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    3.533643] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.533850] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    3.533936] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    3.533940] rkvdec2_init:1008: No niu aclk reset resource define
[    3.533943] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    3.533946] rkvdec2_init:1011: No niu hclk reset resource define
[    3.533961] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
[    3.534012] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    3.534015] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    3.534157] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[    3.534160] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[    3.534164] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[    3.534167] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    3.534171] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    3.534195] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    3.534250] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    3.534260] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.534444] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    3.534529] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    3.534533] rkvdec2_init:1008: No niu aclk reset resource define
[    3.534537] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    3.534540] rkvdec2_init:1011: No niu hclk reset resource define
[    3.534557] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
[    3.534591] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    3.534606] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    3.534764] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[    3.534768] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[    3.534771] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[    3.534774] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    3.534778] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    3.534802] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    3.534932] mpp_rkvenc2 rkvenc-ccu: probing start
[    3.534936] mpp_rkvenc2 rkvenc-ccu: probing finish
[    3.535016] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    3.535026] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.535175] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    3.535189] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    3.535296] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    3.535387] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    3.535444] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    3.535453] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.535650] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    3.535664] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[    3.535798] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    3.535890] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    3.536283] mpp_av1dec: Adding child /av1d@fdc70000
[    3.536338] mpp_av1dec: register device av1d-master
[    3.536360] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    3.536375] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    3.536402] mpp_av1dec av1d-master: Adding to iommu group 16
[    3.536412] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.536605] mpp_av1dec av1d-master: probing start
[    3.536784] mpp_av1dec av1d-master: probing finish
[    3.536808] mpp_service mpp-srv: probe success
[    3.542477] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    3.542484] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    3.543173] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    3.543179] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    3.543861] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    3.543867] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    3.544167] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    3.544212] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    3.544252] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    3.544294] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    3.544338] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    3.544719] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    3.545637] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    3.545930] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 28, base_baud = 1500000) is a 16550A
[    3.546206] feb40000.serial: ttyS1 at MMIO 0xfeb40000 (irq = 87, base_baud = 1500000) is a 16550A
[    3.546398] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 88, base_baud = 1500000) is a 16550A
[    3.547359] random: fast init done
[    3.547448] random: crng init done
[    3.547946] rockchip-vop2 fdd90000.vop: Adding to iommu group 15
[    3.547960] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.552618] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    3.552629] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    3.552641] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    3.552648] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    3.552707] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -517
[    3.552884] [drm] failed to init overlay plane Cluster0-win1
[    3.552909] [drm] failed to init overlay plane Cluster1-win1
[    3.552933] [drm] failed to init overlay plane Cluster2-win1
[    3.552956] [drm] failed to init overlay plane Cluster3-win1
[    3.560551] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc011721660)
[    3.561197] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    3.561333] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc011729568)
[    3.561638] rockchip-drm display-subsystem: route-hdmi0: failed to get logo,offset
[    3.561645] rockchip-drm display-subsystem: can't not find any logo display
[    3.561650] rockchip-drm display-subsystem: failed to show kernel logo
[    3.561687] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    3.561727] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    3.562090] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    3.567066] brd: module loaded
[    3.569761] loop: module loaded
[    3.569961] zram: Added device: zram0
[    3.570078] lkdtm: No crash points registered, enable through debugfs
[    3.570378] system_heap: orders[0] = 6
[    3.570382] system_heap: orders[1] = 4
[    3.570386] system_heap: orders[2] = 0
[    3.571739] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    3.572636] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    3.572842] rk806 spi2.0: ON: 0x40 OFF:0x0
[    3.574389] vdd_gpu_s0: supplied by vcc5v0_sys
[    3.575451] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    3.576045] vdd_log_s0: supplied by vcc5v0_sys
[    3.576607] vdd_vdenc_s0: supplied by vcc5v0_sys
[    3.577179] vdd_ddr_s0: supplied by vcc5v0_sys
[    3.577512] vdd2_ddr_s3: supplied by vcc5v0_sys
[    3.578064] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    3.578532] vcc_3v3_s3: supplied by vcc5v0_sys
[    3.578976] vddq_ddr_s0: supplied by vcc5v0_sys
[    3.579506] vcc_1v8_s3: supplied by vcc5v0_sys
[    3.580024] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    3.580548] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    3.581001] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    3.581459] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    3.581915] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    3.582396] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    3.583029] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    3.583649] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    3.584258] vcc_3v3_s0: supplied by vcc5v0_sys
[    3.584711] vccio_sd_s0: supplied by vcc5v0_sys
[    3.585193] pldo6_s3: supplied by vcc5v0_sys
[    3.585575] rk806 spi2.0: no sleep-setting state
[    3.585580] rk806 spi2.0: no reset-setting pinctrl state
[    3.585584] rk806 spi2.0: no dvs-setting pinctrl state
[    3.587194] register firefly_spi_init spi return v = :0
[    3.587460] wireguard: allowedips self-tests: pass
[    3.591807] wireguard: nonce counter self-tests: pass
[    3.881778] wireguard: ratelimiter self-tests: pass
[    3.881878] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    3.881882] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    3.882230] tun: Universal TUN/TAP device driver, 1.6
[    3.882332] CAN device driver interface
[    3.883328] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    3.883470] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    3.883476] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    3.883480] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x45).
[    3.883485] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    3.883489] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    3.883501] rk_gmac-dwmac fe1b0000.ethernet: integrated PHYmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    3.883512] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    3.883523] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    3.883739] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
[    3.883847] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    3.883853] rk_gmac-dwmac fe1b0000.ethernet:         DWMAC4/5
[    3.883858] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    3.883863] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    3.883866] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    3.883870] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    3.883903] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    3.883907] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.883912] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
[    3.883916] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    3.883921] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
[    4.020509] usbcore: registered new interface driver asix
[    4.020543] usbcore: registered new interface driver ax88179_178a
[    4.020555] usbcore: registered new interface driver cdc_ether
[    4.020568] usbcore: registered new interface driver net1080
[    4.020582] usbcore: registered new interface driver cdc_subset
[    4.020594] usbcore: registered new interface driver zaurus
[    4.020612] usbcore: registered new interface driver cdc_ncm
[    4.020626] usbcore: registered new interface driver qmi_wwan_q
[    4.020638] usbcore: registered new interface driver qmi_wwan
[    4.027760] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.027774] ehci-pci: EHCI PCI platform driver
[    4.027798] ehci-platform: EHCI generic platform driver
[    4.028016] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.028023] ohci-platform: OHCI generic platform driver
[    4.028320] usbcore: registered new interface driver cdc_acm
[    4.028325] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    4.028338] usbcore: registered new interface driver cdc_wdm
[    4.028371] usbcore: registered new interface driver usbserial_generic
[    4.028382] usbserial: USB Serial support registered for generic
[    4.028395] usbcore: registered new interface driver ch341
[    4.028403] usbserial: USB Serial support registered for ch341-uart
[    4.028415] usbcore: registered new interface driver cp210x
[    4.028423] usbserial: USB Serial support registered for cp210x
[    4.028435] usbcore: registered new interface driver ftdi_sio
[    4.028443] usbserial: USB Serial support registered for FTDI USB Serial Device
[    4.028455] usbcore: registered new interface driver keyspan
[    4.028464] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    4.028473] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    4.028481] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    4.028488] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    4.028500] usbcore: registered new interface driver option
[    4.028508] usbserial: USB Serial support registered for GSM modem (1-port)
[    4.028520] usbcore: registered new interface driver oti6858
[    4.028528] usbserial: USB Serial support registered for oti6858
[    4.028539] usbcore: registered new interface driver pl2303
[    4.028548] usbserial: USB Serial support registered for pl2303
[    4.028560] usbcore: registered new interface driver qcserial
[    4.028568] usbserial: USB Serial support registered for Qualcomm USB modem
[    4.028580] usbcore: registered new interface driver sierra
[    4.028588] usbserial: USB Serial support registered for Sierra USB modem
[    4.028632] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[    4.028637] udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers
[    4.028952] [HXTP] himax_hx83102_init
[    4.028957] [HXTP] himax_hx83102_probe:Enter
[    4.028960] [HXTP] Himax common touch panel driver init
[    4.029001] usbcore: registered new interface driver usbtouchscreen
[    4.029882] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0
[    4.030088] i2c /dev entries driver
[    4.033462] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    4.041895] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    4.050736] vdd_npu_s0: supplied by vcc5v0_sys
[    4.058420] pca953x 6-0021: supply vcc not found, using dummy regulator
[    4.058553] pca953x 6-0021: using no AI
[    4.059509] rtc-hym8563 6-0051: could not init device, -6
[    4.060402] rkcifhw fdce0000.rkcif: Adding to iommu group 14
[    4.060427] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    4.060707] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
[    4.061315] rockchip-mipi-csi2: probe success, v4l2_dev:(efault)!
[    4.062369] usbcore: registered new interface driver uvcvideo
[    4.062373] USB Video Class driver (1.1.1)
[    4.063969] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    4.064961] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    4.065888] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[    4.065991] Bluetooth: HCI UART driver ver 2.3
[    4.065996] Bluetooth: HCI UART protocol H4 registered
[    4.066000] Bluetooth: HCI UART protocol ATH3K registered
[    4.066020] usbcore: registered new interface driver bfusb
[    4.066618] cpu cpu0: bin=0
[    4.066791] cpu cpu0: leakage=10
[    4.068206] cpu cpu0: pvtm=1428
[    4.068259] cpu cpu0: pvtm-volt-sel=1
[    4.070125] cpu cpu4: bin=0
[    4.070296] cpu cpu4: leakage=8
[    4.076760] cpu cpu4: pvtm=1672
[    4.080673] cpu cpu4: pvtm-volt-sel=3
[    4.083308] cpu cpu6: bin=0
[    4.083480] cpu cpu6: leakage=8
[    4.089920] cpu cpu6: pvtm=1657
[    4.093818] cpu cpu6: pvtm-volt-sel=3
[    4.095321] cpu cpu0: avs=0
[    4.095918] cpu cpu4: avs=0
[    4.096515] cpu cpu6: avs=0
[    4.096719] cpu cpu0: EM: created perf domain
[    4.096751] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[    4.097407] cpu cpu4: EM: created perf domain
[    4.097433] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    4.105683] cpu cpu6: EM: created perf domain
[    4.106033] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    4.115960] sdhci: Secure Digital Host Controller Interface driver
[    4.115975] sdhci: Copyright(c) Pierre Ossman
[    4.115980] Synopsys Designware Multimedia Card Interface Driver
[    4.116165] sdhci-pltfm: SDHCI platform and OF driver helper
[    4.117794] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    4.117851] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    4.118527] cryptodev: driver 1.12 loaded.
[    4.118564] hid: raw HID events driver (C) Jiri Kosina
[    4.118676] usbcore: registered new interface driver usbhid
[    4.118681] usbhid: USB HID core driver
[    4.122933] Firefly adc init
[    4.122948] Firefly adc-->FIREFLY_ADC_SAMPLE_JIFFIES:  16
[    4.122952] Firefly adc-->MSEC_PER_SEC:  1000
[    4.122956] Firefly adc-->HZ:  300
[    4.123113] Firefly adc-->ret:  0
[    4.123238] optee: probing for conduit method.
[    4.123253] optee: revision 3.13 (4542e1ef)
[    4.123837] optee: initialized driver
[    4.124389] usbcore: registered new interface driver snd-usb-audio
[    4.129560] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
[    4.131156] Initializing XFRM netlink socket
[    4.131360] NET: Registered protocol family 10
[    4.132029] Segment Routing with IPv6
[    4.132171] NET: Registered protocol family 17
[    4.132235] NET: Registered protocol family 15
[    4.132266] Bridge firewalling registered
[    4.132271] can: controller area network core
[    4.132311] NET: Registered protocol family 29
[    4.132316] can: raw protocol
[    4.132321] can: broadcast manager protocol
[    4.132328] can: netlink gateway - max_hops=1
[    4.132528] Bluetooth: RFCOMM TTY layer initialized
[    4.132535] Bluetooth: RFCOMM socket layer initialized
[    4.132546] Bluetooth: RFCOMM ver 1.11
[    4.132553] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    4.132557] Bluetooth: BNEP filters: protocol multicast
[    4.132563] Bluetooth: BNEP socket layer initialized
[    4.132568] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    4.132574] Bluetooth: HIDP socket layer initialized
[    4.132601] 8021q: 802.1Q VLAN Support v1.8
[    4.132613] [BT_RFKILL]: Enter rfkill_rk_init
[    4.132617] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    4.132897] Key type dns_resolver registered
[    4.133711] using random self ethernet address
[    4.133718] using random host ethernet address
[    4.133971] usb0: HOST MAC ba:7c:1e:f3:96:2a
[    4.133977] usb0: MAC 06:09:74:27:87:c2
[    4.133989] using random self ethernet address
[    4.133993] using random host ethernet address
[    4.134024] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    4.134028] g_ether gadget: g_ether ready
[    4.134600] xc7160 3-001b: T-chip firefly camera driver version: 00.01.04
[    4.134625] xc7160 3-001b: Failed to get power-gpios, maybe no use
[    4.134668] xc7160 3-001b: supply avdd not found, using dummy regulator
[    4.134721] xc7160 3-001b: supply dovdd not found, using dummy regulator
[    4.134742] xc7160 3-001b: supply dvdd not found, using dummy regulator
[    4.134757] xc7160 3-001b: could not get default pinstate
[    4.134761] xc7160 3-001b: could not get sleep pinstate
[    4.134772] xc7160 3-001b: Success to get xc7160 endpoint data lanes, dts uses 4 lanes
[    4.143273] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    4.176809] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    4.177463] mmcblk0: mmc0:0001 Y2P064 58.2 GiB
[    4.177630] mmcblk0boot0: mmc0:0001 Y2P064 partition 1 4.00 MiB
[    4.177795] mmcblk0boot1: mmc0:0001 Y2P064 partition 2 4.00 MiB
[    4.178037] mmcblk0rpmb: mmc0:0001 Y2P064 partition 3 16.0 MiB, chardev (234:0)
[    4.181381]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    4.237930] dwc3 fc000000.usb: device reset
[    4.253322] rk3x-i2c feab0000.i2c: timeout, ipd: 0x90, state: 3
[    4.253354] xc7160 3-001b: write XC7160_REG_HIGH_SELECT failed
[    4.253557] xc7160: probe of 3-001b failed with error -5
[    4.253764] registered taskstats version 1
[    4.253771] Loading compiled-in X.509 certificates
[    4.254751] Btrfs loaded, crc32c=crc32c-generic
[    4.254868] pstore: Using crash dump compression: deflate
[    4.255181] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    4.255196] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    4.255341] rga: rga3_core0_irq, irq = 34, match scheduler
[    4.255700] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
[    4.255731] rga: rga3_core0 probe successfully
[    4.255964] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    4.255976] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    4.256103] rga: rga3_core1_irq, irq = 35, match scheduler
[    4.256438] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
[    4.256496] rga: rga3_core1 probe successfully
[    4.256710] rga: rga2_irq, irq = 36, match scheduler
[    4.257176] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[    4.257191] rga: rga2 probe successfully
[    4.257386] rga2_mmu: IOMMU binding successfully, default mapping core[0x1]
[    4.257488] rga: Module initialized. v1.2.20
[    4.257493]
[    4.257496] ********************************************************************
[    4.257500] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    4.257503] **                                                                **
[    4.257507] **  WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[    4.257509] **                                                                **
[    4.257513] ** This means that this kernel is built to expose clk operations  **
[    4.257516] ** such as parent or rate setting, enabling, disabling, etc.      **
[    4.257519] ** to userspace, which may compromise security on your system.    **
[    4.257523] **                                                                **
[    4.257526] ** If you see this message and you are not debugging the          **
[    4.257529] ** kernel, report this immediately to your vendor!                **
[    4.257532] **                                                                **
[    4.257535] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    4.257538] ********************************************************************
[    4.266610] vendor storage:20190527 ret = 0
[    4.285390] mali fb000000.gpu: Kernel DDK version g13p0-01eac0
[    4.285613] vcc5v0_host: supplied by vcc5v0_usb
[    4.286585] mali fb000000.gpu: leakage=14
[    4.286685] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    4.286854] vcc5v0_host3: supplied by vcc5v0_usb
[    4.288567] mali fb000000.gpu: pvtm=854
[    4.288688] mali fb000000.gpu: pvtm-volt-sel=2
[    4.290421] mali fb000000.gpu: avs=0
[    4.290619] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    4.291816] mali fb000000.gpu: GPU hardware issue table may need updating:
[    4.291816] r0p0 status 5 is unknown; treating as r0p0 status 0
[    4.291844] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    4.292065] mali fb000000.gpu: No priority control manager is configured
[    4.292089] mali fb000000.gpu: No memory group manager is configured
[    4.292142] mali fb000000.gpu: Protected memory allocator not available
[    4.292905] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
[    4.293008] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    4.294599] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[    4.294612] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[    4.294740] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[    4.294860] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[    4.294977] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[    4.296139] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    4.296828] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
[    4.296995] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    4.297946] mali fb000000.gpu: Probed as mali0
[    4.298952] rockchip-dmc dmc: leakage=31
[    4.298969] rockchip-dmc dmc: leakage-volt-sel=0
[    4.299330] rockchip-dmc dmc: avs=0
[    4.299346] rockchip-dmc dmc: current ATF version 0x100
[    4.299444] rockchip-dmc dmc: normal_rate = 1560000000
[    4.299451] rockchip-dmc dmc: reboot_rate = 2112000000
[    4.299458] rockchip-dmc dmc: suspend_rate = 528000000
[    4.299464] rockchip-dmc dmc: video_4k_rate = 1560000000
[    4.299471] rockchip-dmc dmc: video_4k_10b_rate = 1560000000
[    4.299478] rockchip-dmc dmc: video_svep_rate = 1560000000
[    4.299484] rockchip-dmc dmc: boost_rate = 2112000000
[    4.299492] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
[    4.299498] rockchip-dmc dmc: performance_rate = 2112000000
[    4.299506] rockchip-dmc dmc: hdmirx_rate = 2112000000
[    4.299517] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[    4.299523] rockchip-dmc dmc: failed to get vop pn to msch rl
[    4.299627] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    4.299897] rockchip-dmc dmc: could not find power_model node
[    4.320700] using random self ethernet address
[    4.320717] using random host ethernet address
[    4.321282] usb1: HOST MAC 46:1a:db:b5:fd:87
[    4.321290] usb1: MAC 2a:34:a6:57:eb:d5
[    4.321321] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
[    4.321328] g_cdc gadget: g_cdc ready
[    4.322202] input: adc-keys as /devices/platform/adc-keys/input/input2
[    4.330147] dwc3 fc000000.usb: device disconnect
[    4.337676] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    4.338019] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 1
[    4.338197] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
[    4.397542] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    4.397577] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.397591] usb usb1: Product: Generic Platform OHCI controller
[    4.397606] usb usb1: Manufacturer: Linux 5.10.110 ohci_hcd
[    4.397619] usb usb1: SerialNumber: fc8c0000.usb
[    4.398459] hub 1-0:1.0: USB hub found
[    4.398530] hub 1-0:1.0: 1 port detected
[    4.400306] ehci-platform fc880000.usb: EHCI Host Controller
[    4.400896] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    4.401092] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
[    4.413486] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    4.413938] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    4.413972] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.413997] usb usb2: Product: EHCI Host Controller
[    4.414024] usb usb2: Manufacturer: Linux 5.10.110 ehci_hcd
[    4.414048] usb usb2: SerialNumber: fc880000.usb
[    4.415486] hub 2-0:1.0: USB hub found
[    4.415587] hub 2-0:1.0: 1 port detected
[    4.420218] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    4.421040] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    4.421347] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
[    4.432962] dwc3 fc400000.usb: device reset
[    4.481133] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    4.481208] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.481237] usb usb3: Product: Generic Platform OHCI controller
[    4.481262] usb usb3: Manufacturer: Linux 5.10.110 ohci_hcd
[    4.481288] usb usb3: SerialNumber: fc840000.usb
[    4.482658] hub 3-0:1.0: USB hub found
[    4.482752] hub 3-0:1.0: 1 port detected
[    4.485899] ehci-platform fc800000.usb: EHCI Host Controller
[    4.486403] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 4
[    4.486499] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
[    4.500039] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    4.500566] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    4.500604] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.500631] usb usb4: Product: EHCI Host Controller
[    4.500657] usb usb4: Manufacturer: Linux 5.10.110 ehci_hcd
[    4.500680] usb usb4: SerialNumber: fc800000.usb
[    4.501737] hub 4-0:1.0: USB hub found
[    4.501757] hub 4-0:1.0: 1 port detected
[    4.503692] register spi return v = :0
[    4.505713] RKNPU fdab0000.npu: Adding to iommu group 0
[    4.505749] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    4.505770] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    4.505820] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    4.505832] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    4.505868] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 76,32 bit host data width,256 deep fifo
[    4.505896] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    4.509430] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    4.509461] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    4.509480] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    4.510231] [drm] Initialized rknpu 0.8.2 20220829 for fdab0000.npu on minor 1
[    4.514235] RKNPU fdab0000.npu: leakage=8
[    4.514315] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[    4.521748] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    4.522434] RKNPU fdab0000.npu: pvtm=849
[    4.527688] RKNPU fdab0000.npu: pvtm-volt-sel=2
[    4.528959] RKNPU fdab0000.npu: avs=0
[    4.529187] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    4.542220] RKNPU fdab0000.npu: failed to find power_model node
[    4.542275] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    4.542296] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    4.544211] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    4.553234] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    4.554889] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    4.555925] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '17:07:37', on 'Jan 12 2023'.
[    4.556333] Mali:
[    4.556336] Mali device driver loaded
[    4.557530] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    4.557627] cfg80211: failed to load regulatory.db
[    4.563474] ret 1024 0
[    4.563837] ALSA device list:
[    4.563858]   #0: rockchip-hdmi0
[    4.569662] Freeing unused kernel memory: 7616K
[    4.603588] Run /init as init process
Starting syslogd: OK
Starting klogd: OK
Running sysctl: OK
Populating /dev using udev: [    4.658950] udevd[278]: starting version 3.2.10
[    4.664410] udevd[279]: starting eudev-3.2.10
done
Saving random seed: OK
Will now mount all partitions in /etc/fstab
Note: Will skip fsck, remove /.skip_fsck to enable
Handling misc: /dev/mmcblk0p2 /misc emmc defaults 0
Unsupported file system emmc for /dev/mmcblk0p2
Handling userdata: /dev/mmcblk0p7 /userdata ext4 defaults 0
Resizing /dev/mmcblk0p7(ext4)
[    5.175664] EXT4-fs (mmcblk0p7): recovery complete
[    5.175714] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
resize2fs 1.46.4 (18-Aug-2021)
The filesystem is already 13583352 (4k) blocks long.  Nothing to do!

tune2fs 1.46.4 (18-Aug-2021)
Mounting /dev/mmcblk0p7(ext4) on /userdata
[    5.206705] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
Handling userdata: /dev/mmcblk0p7 /userdata ext4 defaults 2
[    5.303929] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    5.304229] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    5.304423] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000082002010010
[    5.304470] xhci-hcd xhci-hcd.5.auto: irq 110, io mem 0xfc000000
[    5.304803] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    5.304817] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.304827] usb usb5: Product: xHCI Host Controller
[    5.304837] usb usb5: Manufacturer: Linux 5.10.110 xhci-hcd
[    5.304847] usb usb5: SerialNumber: xhci-hcd.5.auto
[    5.305397] hub 5-0:1.0: USB hub found
[    5.305461] hub 5-0:1.0: 1 port detected
[    5.305804] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    5.305992] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    5.306012] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[    5.306077] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.306181] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    5.306204] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.306215] usb usb6: Product: xHCI Host Controller
[    5.306224] usb usb6: Manufacturer: Linux 5.10.110 xhci-hcd
[    5.306233] usb usb6: SerialNumber: xhci-hcd.5.auto
[    5.306746] hub 6-0:1.0: USB hub found
[    5.306802] hub 6-0:1.0: 1 port detected
Mounting /dev/mmcblk0p7(ext4) on /userdata
[    5.326759] dwc3 fc400000.usb: device reset
[    5.330097] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
Log saved to /tmp/mountall.log
Starting network: cmdline=storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  storagenode=/mmc@fe2e0000 androidboot.verifiedbootstate=orange ro rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1

read console from cmdline is /dev/ttyFIQ0
Starting recovery on Thu Jan  1 00:00:03 1970

Recovery System have UI defined.
failed to read font: res=-1, fall back to the compiled-in font
cannot find/open a drm device: No such file or directory
recovery filesystem table
=========================
  0 (null) /tmp ramdisk (null) (null) (null)
  1 /dev/root / ext4 rw,noauto 0 1
  2 proc /proc proc defaults 0 0
  3 devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
  4 tmpfs /dev/shm tmpfs mode=0777 0 0
  5 tmpfs /tmp tmpfs mode=1777 0 0
  6 tmpfs /run tmpfs mode=0755,nosuid,nodev 0 0
  7 sysfs /sys sysfs defaults 0 0
  8 /dev/block/by-name/misc /misc emmc defaults 0 0
  9 /dev/block/by-name/userdata /userdata ext4 defaults 0 0
  10 /dev/block/by-name/oem /oem ext2 defaults 0 0
  11 /dev/sda1 /mnt/usb_storage vfat defaults 0 0
  12 /dev/mmcblk1p1 /mnt/external_sd vfat defaults 0 0
  13 /dev/block/by-name/oem /oem ext2 defaults 0 2
  14 /dev/block/by-name/userdata /userdata ext4 defaults 0 2

executing '/usr/bin/relink-block.sh'
OK
Debug: configfs_init
mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac1.gs0': No such file or directory
mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac2.gs0': No such file or directory
[    5.388593] file system registered
mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory
[    5.394845] using random self ethernet address
[    5.394882] using random host ethernet address
[    5.398984] Mass Storage Function, version: 2009/09/11
[    5.399030] LUN: removable file: (no medium)
mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/hid.usb0': No such file or directory
[    5.430915] read descriptors
[    5.430967] read strings
executed '/usr/bin/relink-block.sh' done
executed '/usr/bin/relink-block.sh' return 0
emmc_point is /dev/mmcblk0
sd_point is (null)
sd_point_2 is (null)
Recovery start....................
read cmdline
>>> Boot from non-SDcard
executing '/usr/bin/relink-block.sh'
executed '/usr/bin/relink-block.sh' done
executed '/usr/bin/relink-block.sh' return 0
[I/]RECOVERY devices is not MTD.
[I/]RECOVERY Boot command: boot-recovery
[I/]RECOVERY Got arguments from boot message
executing '/usr/bin/relink-block.sh'
[    5.619860] usb 5-1: new high-speed USB device number 2 using xhci-hcd
executed '/usr/bin/relink-block.sh' done
executed '/usr/bin/relink-block.sh' return 0
[I/]RECOVERY devices is not MTD.
Command: "recovery" "--wipe_all"

firefly: umount sdcard
[    5.664643] dwc3 fc400000.usb: device reset
[    5.764204] usb 5-1: New USB device found, idVendor=23a9, idProduct=ef18, bcdDevice= 1.00
[    5.764301] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.764328] usb 5-1: Product: DISK
[    5.764353] usb 5-1: Manufacturer: USB
sh: write error: Device or resource busy
[    6.439454] udc-core: couldn't find an available UDC or it's busy
Starting input-event-daemon: input-event-daemon: Start parsing /etc/input-event-daemon.conf...
input-event-daemon: Adding device: /dev/input/event0...
input-event-daemon: Adding device: /dev/input/event1...
input-event-daemon: Adding device: /dev/input/event2...
input-event-daemon: Start listening on 3 devices...
done
[root@RK3588:/]# Formatting /userdata...
executing '/usr/bin/relink-block.sh'
executed '/usr/bin/relink-block.sh' done
executed '/usr/bin/relink-block.sh' return 0
executing '/usr/bin/relink-block.sh'
executed '/usr/bin/relink-block.sh' done
executed '/usr/bin/relink-block.sh' return 0
format '/dev/block/by-name/userdata' to ext4 filesystem
executing '/sbin/mke2fs'
executed '/sbin/mke2fs' done
executed '/sbin/mke2fs' return 0
executing '/sbin/e2fsck'
e2fsck 1.46.4 (18-Aug-2021)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/by-name/userdata: 11/3399680 files (0.0% non-contiguous), 292268/13583352 blocks
executed '/sbin/e2fsck' done
executed '/sbin/e2fsck' return 0
Data wipe done.
userdata wipe done.
resize oem done.
finish_recovery Enter.....
[    9.694425] executing '/usr/bin/relink-block.sh'
EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts:
executed '/usr/bin/relink-block.sh' done
executed '/usr/bin/relink-block.sh' return 0
[E/]RECOVERY Can't open /tmp/recovery.log
executing '/usr/bin/relink-block.sh'
executed '/usr/bin/relink-block.sh' done
executed '/usr/bin/relink-block.sh' return 0
[E/]RECOVERY Can't open /tmp/recovery.log
executing '/usr/bin/relink-block.sh'
executed '/usr/bin/relink-block.sh' done
executed '/usr/bin/relink-block.sh' return 0
[I/]RECOVERY devices is not MTD.
executing '/usr/bin/relink-block.sh'
executed '/usr/bin/relink-block.sh' done
executed '/usr/bin/relink-block.sh' return 0
Rebooting...
Reboot...
[   10.079971] kvm: exiting hardware virtualization
[   10.180880] rk860-regulator 1-0042: rk860..... reset
[   10.182276] rk860-regulator 1-0042: force rk860x_reset ok!
[   10.182775] rk860-regulator 0-0043: rk860..... reset
[   10.184247] rk860-regulator 0-0043: force rk860x_reset ok!
[   10.184741] rk860-regulator 0-0042: rk860..... reset
[   10.186081] rk860-regulator 0-0042: force rk860x_reset ok!
[   10.186984] mpp_av1dec av1d-master: shutdown device
[   10.187420] mpp_av1dec av1d-master: shutdown success
[   10.237492] mpp_rkvdec2 fdc48100.rkvdec-core: shutdown device
[   10.238099] mpp_rkvdec2 fdc48100.rkvdec-core: shutdown success
[   10.238629] mpp_rkvdec2 fdc38100.rkvdec-core: shutdown device
[   10.239135] mpp_rkvdec2 fdc38100.rkvdec-core: shutdown success
[   10.239652] mpp_rkvenc2 fdbe0000.rkvenc-core: shutdown device
[   10.240169] mpp_rkvenc2 fdbe0000.rkvenc-core: shutdown success
[   10.240689] mpp_rkvenc2 fdbd0000.rkvenc-core: shutdown device
[   10.241194] mpp_rkvenc2 fdbd0000.rkvenc-core: shutdown success
[   10.241712] mpp-iep2 fdbb0000.iep: shutdown device
[   10.242130] mpp-iep2 fdbb0000.iep: shutdown success
[   10.242566] mpp_vepu2 fdbac000.jpege-core: shutdown device
[   10.243050] mpp_vepu2 fdbac000.jpege-core: shutdown success
[   10.243555] mpp_vepu2 fdba8000.jpege-core: shutdown device
[   10.244038] mpp_vepu2 fdba8000.jpege-core: shutdown success
[   10.244529] mpp_vepu2 fdba4000.jpege-core: shutdown device
[   10.245013] mpp_vepu2 fdba4000.jpege-core: shutdown success
[   10.245505] mpp_vepu2 fdba0000.jpege-core: shutdown device
[   10.245989] mpp_vepu2 fdba0000.jpege-core: shutdown success
[   10.246485] mpp_jpgdec fdb90000.jpegd: shutdown device
[   10.246935] mpp_jpgdec fdb90000.jpegd: shutdown success
[   10.247418] mpp_vdpu2 fdb50400.vdpu: shutdown device
[   10.247848] mpp_vdpu2 fdb50400.vdpu: shutdown success
[   10.248411] xhci-hcd xhci-hcd.5.auto: remove, state 4
[   10.248855] usb usb6: USB disconnect, device number 1
[   10.249778] xhci-hcd xhci-hcd.5.auto: USB bus 6 deregistered
[   10.250802] xhci-hcd xhci-hcd.5.auto: remove, state 1
[   10.251254] usb usb5: USB disconnect, device number 1
[   10.251701] usb 5-1: USB disconnect, device number 2
[   10.253652] xhci-hcd xhci-hcd.5.auto: USB bus 5 deregistered
[   10.255215] reboot: Restarting system
DDR Version V1.08 20220617
LPDDR4, 2112MHz
channel[0] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
channel[1] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
channel[2] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
channel[3] BW=16 Col=10 Bk=8 CS0 Row=17 CS=1 Die BW=16 Size=2048MB
Manufacturer ID:0xff
CH0 RX Vref:28.7%, TX Vref:12.2%,0.0%
CH1 RX Vref:28.7%, TX Vref:12.2%,0.0%
CH2 RX Vref:28.7%, TX Vref:12.2%,0.0%
CH3 RX Vref:27.7%, TX Vref:12.2%,0.0%
change to F1: 528MHz
change to F2: 1068MHz
change to F3: 1560MHz
change to F0: 2112MHz
out
U-Boot SPL board init
U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34)
Failed to set cpub01
Failed to set cpub23
unknown raw ID phN
unrecognized JEDEC id bytes: 00, 00, 00
Trying to boot from MMC2
MMC: no card present
mmc_init: -123, time 0
spl: mmc init failed with error: -123
Trying to boot from MMC1
Trying fit image at 0x4000 sector
## Verified-boot: 0
## Checking atf-1 0x00040000 ... sha256(ce2098067b...) + OK
## Checking uboot 0x00200000 ... sha256(77b6741b0d...) + OK
## Checking fdt 0x0035b2f8 ... sha256(c07f4a4d71...) + OK
## Checking atf-2 0x000f0000 ... sha256(ebc45c531e...) + OK
## Checking atf-3 0xff100000 ... sha256(9ded9f3bb5...) + OK
## Checking optee 0x08400000 ... sha256(fde0860845...) + OK
Jumping to U-Boot(0x00200000) via ARM Trusted Firmware(0x00040000)
Total: 118.482 ms

INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-444-g1450d21e8:derrick.huang
NOTICE:  BL31: Built : 16:25:50, Oct 12 2022
INFO:    spec: 0x1
INFO:    ext 32k is not valid
INFO:    ddr: stride-en 4CH
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    valid_cpu_msk=0xff bcore0_rst = 0x0, bcore1_rst = 0x0
INFO:    system boots from cpu-hwid-0
INFO:    idle_st=0x21fff, pd_st=0x11fff9, repair_st=0xfff70001
INFO:    dfs DDR fsp_params[0].freq_mhz= 2112MHz
INFO:    dfs DDR fsp_params[1].freq_mhz= 528MHz
INFO:    dfs DDR fsp_params[2].freq_mhz= 1068MHz
INFO:    dfs DDR fsp_params[3].freq_mhz= 1560MHz
INFO:    BL31: Initialising Exception Handling Framework
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INFO:    hdmirx_handler: dma not on, ret
I/TC:
I/TC: OP-TEE version: 3.13.0-652-g4542e1efd #derrick.huang (gcc version 10.2.1 20201103 (GNU Toolchain for the A-profile Architecture 10.2-2020.11 (arm-10.16))) #5 2022年 09月 20日 星期二 09:41:09 CST aarch64
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09(u-boot commit id: e8b5ef0c39)(sdk version: rk3588_linux_release_20221012_v1.0.2a)-ge8b5ef0c39 #root (Jan 16 2023 - 14:04:55 +0800)

Model: Rockchip RK3588 Evaluation Board
PreSerial: 2, raw, 0xfeb50000
DRAM:  7.7 GiB
Sysmem: init
Relocation Offset: eda1c000
Relocation fdt: eb9f9fb8 - eb9fecc0
CR: M/C/I
Using default environment

mmc@fe2c0000: 1, mmc@fe2e0000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 200Mhz
PartType: EFI
DM: v2
boot mode: normal
=================begin===================
162383 bytes read in 7 ms (22.1 MiB/s)
DTB(Distro): rk-kernel.dtb
I2c0 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big0_s0 800000 uV
vsel-gpios- not found!
en-gpios- not found!
vdd_cpu_big1_s0 800000 uV
I2c1 speed: 100000Hz
vsel-gpios- not found!
en-gpios- not found!
vdd_npu_s0 800000 uV
spi2: RK806: 2
ON=0x00, OFF=0x00
vdd_gpu_s0 750000 uV
vdd_cpu_lit_s0 750000 uV
vdd_log_s0 750000 uV
vdd_vdenc_s0 init 750000 uV
vdd_ddr_s0 850000 uV
I2c6 speed: 400000Hz
get vp0 plane mask:0x5, primary id:2, cursor_plane:-1, from dts
get vp1 plane mask:0xa, primary id:3, cursor_plane:-1, from dts
get vp2 plane mask:0x140, primary id:8, cursor_plane:-1, from dts
get vp3 plane mask:0x280, primary id:9, cursor_plane:-1, from dts
Could not find baseparameter partition
Model: Firefly INo resource partition
No file: logo.bmp
=================begin===================
512 bytes read in 3 ms (166 KiB/s)
logo(Distro): logo.bmp
=================begin===================
127818 bytes read in 4 ms (30.5 MiB/s)
logo(Distro): logo.bmp
Rockchip UBOOT DRM driver version: v1.0.1
vp0 have layer nr:2[0 2 ], primary plane: 2
vp1 have layer nr:2[1 3 ], primary plane: 3
vp2 have layer nr:2[6 8 ], primary plane: 8
vp3 have layer nr:2[7 9 ], primary plane: 9
hdmi@fde80000 disconnected
CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  b0pll 24000 KHz
  b1pll 24000 KHz
  lpll 24000 KHz
  v0pll 24000 KHz
  aupll 786431 KHz
  cpll 1500000 KHz
  gpll 1188000 KHz
  npll 850000 KHz
  ppll 1100000 KHz
  aclk_center_root 702000 KHz
  pclk_center_root 100000 KHz
  hclk_center_root 396000 KHz
  aclk_center_low_root 500000 KHz
  aclk_top_root 594000 KHz
  pclk_top_root 100000 KHz
  aclk_low_top_root 396000 KHz
Net:   eth0: ethernet@fe1b0000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "(none)"
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
No valid android hdr
Android image load failed
Android boot failed, error -1.
## Booting FIT Image FIT: No fit blob
FIT: No FIT image
Unknown command 'bootrkp' - try 'help'
MMC: no card present
mmc_init: -123, time 1
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:3...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
=================begin===================
104 bytes read in 3 ms (33.2 KiB/s)
FIREFLY: use /rk-kernel.dtb
1:      rk-kernel.dtb linux-5.10.110
Retrieving file: /initrd-5.10.110
=================begin===================
9233322 bytes read in 54 ms (163.1 MiB/s)
Retrieving file: /Image-5.10.110
=================begin===================
41757184 bytes read in 262 ms (152 MiB/s)
Retrieving file: /rk-kernel.dtb
=================begin===================
162383 bytes read in 8 ms (19.4 MiB/s)
Fdt Ramdisk skip relocation
## Flattened Device Tree blob at 0x08300000
   Booting using the fdt blob at 0x08300000
  'reserved-memory' cma: addr=10000000 size=10000000
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000832aa4e
No resource partition
No file: logo_kernel.bmp
=================begin===================
512 bytes read in 3 ms (166 KiB/s)
logo(Distro): logo_kernel.bmp
=================begin===================
127818 bytes read in 3 ms (40.6 MiB/s)
logo(Distro): logo_kernel.bmp
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x09400000 - 0xf0000000 (size: 0xe6c00000)
Adding bank: 0x100000000 - 0x200000000 (size: 0x100000000)
Total: 641.781 ms

Starting kernel ...

[    0.771200] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
[    0.771226] Linux version 5.10.110 (root@zh-virtual-machine) (kernel commit id: 4a55b55733a0) (sdk version: rk3588_linux_release_20221012_v1.0.2a) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 10.3.1 20210621, GNU ld (GNU Toolchain for the A-profile Architecture 10.3-2021.07 (arm-10.29)) 2.36.1.20210621) #5 SMP Fri Jan 13 16:43:37 CST 2023
[    0.778750] Machine model: Firefly ITX-3588J HDMI(Linux)
[    0.778832] earlycon: uart8250 at MMIO32 0x00000000feb50000 (options '')
[    0.783676] printk: bootconsole [uart8250] enabled
[    0.785890] efi: UEFI not found.
[    0.790238] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@00000000': base 0x0000000000000000, size 0 MiB
[    0.791390] Reserved memory: created CMA memory pool at 0x0000000010000000, size 256 MiB
[    0.792132] OF: reserved mem: initialized node cma, compatible id shared-dma-pool
[    0.907811] Zone ranges:
[    0.908050]   DMA      [mem 0x0000000000200000-0x00000000ffffffff]
[    0.908622]   DMA32    empty
[    0.908890]   Normal   [mem 0x0000000100000000-0x00000001ffffffff]
[    0.909460] Movable zone start for each node
[    0.909852] Early memory node ranges
[    0.910182]   node   0: [mem 0x0000000000200000-0x00000000083fffff]
[    0.910758]   node   0: [mem 0x0000000009400000-0x00000000efffffff]
[    0.911335]   node   0: [mem 0x0000000100000000-0x00000001ffffffff]
[    0.911913] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff]
[    0.959262] psci: probing for conduit method from DT.
[    0.959733] psci: PSCIv1.1 detected in firmware.
[    0.960157] psci: Using standard PSCI v0.2 function IDs
[    0.960640] psci: Trusted OS migration not required
[    0.961090] psci: SMC Calling Convention v1.2
[    0.961888] percpu: Embedded 32 pages/cpu s93160 r8192 d29720 u131072
[    0.962692] Detected VIPT I-cache on CPU0
[    0.963096] CPU features: detected: GIC system register CPU interface
[    0.963688] CPU features: detected: Virtualization Host Extensions
[    0.964259] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    0.964907] alternatives: patching kernel code
[    0.967472] Built 1 zonelists, mobility grouping on.  Total pages: 1995336
[    0.968110] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  storagenode=/mmc@fe2e0000 androidboot.verifiedbootstate=orange ro rootwait earlycon=uart8250,mmio32,0xfeb50000 console=ttyFIQ0 irqchip.gicv3_pseudo_nmi=0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.972627] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.973750] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.974470] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.981298] software IO TLB: mapped [mem 0x00000000e9f00000-0x00000000edf00000] (64MB)
[    1.045070] Memory: 7571076K/8108032K available (22336K kernel code, 3786K rwdata, 6892K rodata, 7616K init, 656K bss, 274812K reserved, 262144K cma-reserved)
[    1.046489] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    1.047117] ftrace: allocating 67468 entries in 264 pages
[    1.145986] ftrace: allocated 264 pages with 2 groups
[    1.146712] rcu: Hierarchical RCU implementation.
[    1.147148] rcu:     RCU event tracing is enabled.
[    1.147566]  Rude variant of Tasks RCU enabled.
[    1.147982]  Tracing variant of Tasks RCU enabled.
[    1.148423] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    1.154213] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    1.156641] GICv3: GIC: Using split EOI/Deactivate mode
[    1.157125] GICv3: 480 SPIs implemented
[    1.157478] GICv3: 0 Extended SPIs implemented
[    1.157911] GICv3: Distributor has no Range Selector support
[    1.158436] GICv3: 16 PPIs implemented
[    1.158822] GICv3: CPU0: found redistributor 0 region 0:0x00000000fe680000
[    1.159557] ITS [mem 0xfe640000-0xfe65ffff]
[    1.159984] ITS@0x00000000fe640000: allocated 8192 Devices @100220000 (indirect, esz 8, psz 64K, shr 0)
[    1.160863] ITS@0x00000000fe640000: allocated 32768 Interrupt Collections @100230000 (flat, esz 2, psz 64K, shr 0)
[    1.161814] ITS: using cache flushing for cmd queue
[    1.162290] ITS [mem 0xfe660000-0xfe67ffff]
[    1.162713] ITS@0x00000000fe660000: allocated 8192 Devices @100250000 (indirect, esz 8, psz 64K, shr 0)
[    1.163592] ITS@0x00000000fe660000: allocated 32768 Interrupt Collections @100260000 (flat, esz 2, psz 64K, shr 0)
[    1.164543] ITS: using cache flushing for cmd queue
[    1.165118] GICv3: using LPI property table @0x0000000100270000
[    1.165772] GIC: using cache flushing for LPI property table
[    1.166296] GICv3: CPU0: using allocated LPI pending table @0x0000000100280000
[    1.167107] random: get_random_bytes called from start_kernel+0x3f0/0x65c with crng_init=0
[    1.276871] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    1.278141] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    1.279101] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    1.280713] Console: colour dummy device 80x25
[    1.281131] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    1.282043] pid_max: default: 32768 minimum: 301
[    1.282540] LSM: Security Framework initializing
[    1.283011] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.283700] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    1.285916] rcu: Hierarchical SRCU implementation.
[    1.287120] Platform MSI: msi-controller@fe640000 domain created
[    1.287666] Platform MSI: msi-controller@fe660000 domain created
[    1.288465] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe640000 domain created
[    1.289209] PCI/MSI: /interrupt-controller@fe600000/msi-controller@fe660000 domain created
[    1.290038] EFI services will not be available.
[    1.290712] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    1.292254] Detected VIPT I-cache on CPU1
[    1.292284] GICv3: CPU1: found redistributor 100 region 0:0x00000000fe6a0000
[    1.292299] GICv3: CPU1: using allocated LPI pending table @0x0000000100290000
[    1.292342] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
[    1.293536] Detected VIPT I-cache on CPU2
[    1.293558] GICv3: CPU2: found redistributor 200 region 0:0x00000000fe6c0000
[    1.293572] GICv3: CPU2: using allocated LPI pending table @0x00000001002a0000
[    1.293609] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
[    1.294768] Detected VIPT I-cache on CPU3
[    1.294787] GICv3: CPU3: found redistributor 300 region 0:0x00000000fe6e0000
[    1.294800] GICv3: CPU3: using allocated LPI pending table @0x00000001002b0000
[    1.294834] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
[    1.296008] CPU features: detected: Spectre-v4
[    1.296011] CPU features: detected: Spectre-BHB
[    1.296013] Detected PIPT I-cache on CPU4
[    1.296024] GICv3: CPU4: found redistributor 400 region 0:0x00000000fe700000
[    1.296032] GICv3: CPU4: using allocated LPI pending table @0x00000001002c0000
[    1.296055] CPU4: Booted secondary processor 0x0000000400 [0x414fd0b0]
[    1.297170] Detected PIPT I-cache on CPU5
[    1.297182] GICv3: CPU5: found redistributor 500 region 0:0x00000000fe720000
[    1.297189] GICv3: CPU5: using allocated LPI pending table @0x00000001002d0000
[    1.297213] CPU5: Booted secondary processor 0x0000000500 [0x414fd0b0]
[    1.298341] Detected PIPT I-cache on CPU6
[    1.298352] GICv3: CPU6: found redistributor 600 region 0:0x00000000fe740000
[    1.298360] GICv3: CPU6: using allocated LPI pending table @0x00000001002e0000
[    1.298383] CPU6: Booted secondary processor 0x0000000600 [0x414fd0b0]
[    1.299494] Detected PIPT I-cache on CPU7
[    1.299506] GICv3: CPU7: found redistributor 700 region 0:0x00000000fe760000
[    1.299514] GICv3: CPU7: using allocated LPI pending table @0x00000001002f0000
[    1.299537] CPU7: Booted secondary processor 0x0000000700 [0x414fd0b0]
[    1.299592] smp: Brought up 1 node, 8 CPUs
[    1.316080] SMP: Total of 8 processors activated.
[    1.316504] CPU features: detected: Privileged Access Never
[    1.316999] CPU features: detected: User Access Override
[    1.317470] CPU features: detected: 32-bit EL0 Support
[    1.317928] CPU features: detected: Common not Private translations
[    1.318486] CPU features: detected: RAS Extension Support
[    1.318967] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    1.319729] CPU features: detected: CRC32 instructions
[    1.320192] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
[    1.320811] CPU features: detected: RCpc load-acquire (LDAPR)
[    1.321391] CPU: All CPU(s) started at EL2
[    1.323874] devtmpfs: initialized
[    1.332096] Registered cp15_barrier emulation handler
[    1.332551] Registered setend emulation handler
[    1.333025] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    1.333893] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    1.334618] pinctrl core: initialized pinctrl subsystem
[    1.335289] DMI not present or invalid.
[    1.335735] NET: Registered protocol family 16
[    1.336620] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    1.337320] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[    1.338029] audit: initializing netlink subsys (disabled)
[    1.338563] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1
[    1.338992] thermal_sys: Registered thermal governor 'fair_share'
[    1.339253] thermal_sys: Registered thermal governor 'step_wise'
[    1.339800] thermal_sys: Registered thermal governor 'user_space'
[    1.340332] thermal_sys: Registered thermal governor 'power_allocator'
[    1.340982] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.342294] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.343025] thermal thermal_zone3: power_allocator: sustainable_power will be estimated
[    1.343758] thermal thermal_zone4: power_allocator: sustainable_power will be estimated
[    1.344494] thermal thermal_zone5: power_allocator: sustainable_power will be estimated
[    1.345228] thermal thermal_zone6: power_allocator: sustainable_power will be estimated
[    1.345952] cpuidle: using governor menu
[    1.346306] Registered FIQ tty driver
[    1.346740] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    1.347433] ASID allocator initialised with 65536 entries
[    1.348910] ramoops: dmesg-0 0x20000@0x0000000000110000
[    1.349490] ramoops: console 0x80000@0x0000000000130000
[    1.349973] ramoops: pmsg    0x50000@0x00000000001b0000
[    1.350648] printk: console [ramoops-1] enabled
[    1.351052] pstore: Registered ramoops as persistent store backend
[    1.351602] ramoops: using 0xf0000@0x110000, ecc: 0
[    1.383343] rockchip-gpio fd8a0000.gpio: probed /pinctrl/gpio@fd8a0000
[    1.384104] rockchip-gpio fec20000.gpio: probed /pinctrl/gpio@fec20000
[    1.384833] rockchip-gpio fec30000.gpio: probed /pinctrl/gpio@fec30000
[    1.385577] rockchip-gpio fec40000.gpio: probed /pinctrl/gpio@fec40000
[    1.386334] rockchip-gpio fec50000.gpio: probed /pinctrl/gpio@fec50000
[    1.386940] rockchip-pinctrl pinctrl: probed pinctrl
[    1.393524] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    1.394127] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    1.394723] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    1.395319] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    1.453701] raid6: neonx8   gen()  5617 MB/s
[    1.510425] raid6: neonx8   xor()  4437 MB/s
[    1.567153] raid6: neonx4   gen()  5548 MB/s
[    1.623877] raid6: neonx4   xor()  4717 MB/s
[    1.680602] raid6: neonx2   gen()  5289 MB/s
[    1.737326] raid6: neonx2   xor()  4187 MB/s
[    1.794053] raid6: neonx1   gen()  4370 MB/s
[    1.850780] raid6: neonx1   xor()  3630 MB/s
[    1.907509] raid6: int64x8  gen()  2632 MB/s
[    1.964234] raid6: int64x8  xor()  1558 MB/s
[    2.020956] raid6: int64x4  gen()  2944 MB/s
[    2.077682] raid6: int64x4  xor()  1567 MB/s
[    2.134411] raid6: int64x2  gen()  2515 MB/s
[    2.191140] raid6: int64x2  xor()  1359 MB/s
[    2.247863] raid6: int64x1  gen()  2061 MB/s
[    2.304585] raid6: int64x1  xor()  1082 MB/s
[    2.304967] raid6: using algorithm neonx8 gen() 5617 MB/s
[    2.305447] raid6: .... xor() 4437 MB/s, rmw enabled
[    2.305886] raid6: using neon recovery algorithm
[    2.306761] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    2.307251] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    2.307761] fiq_debugger_probe: could not install nmi irq handler
[[    2.308348] printk: console [ttyFIQ0] enabled
    2.308348] printk: console [ttyFIQ0] enabled
[    2.309111] printk: bootconsole [uart8250] disabled
[    2.309111] printk: bootconsole [uart8250] disabled
[    2.309622] Registered fiq debugger ttyFIQ0
[    2.309900] vcc5v0_sys: supplied by vcc12v_dcin
[    2.309991] vcc5v0_usbdcin: supplied by vcc12v_dcin
[    2.310079] vcc5v0_usb: supplied by vcc12v_dcin
[    2.310157] vcc_1v1_nldo_s3: supplied by vcc5v0_sys
[    2.310445] iommu: Default domain type: Passthrough
[    2.310504] rk_iommu fdab9000.iommu: version = 2
[    2.310786] rk_iommu fdb50800.iommu: version = 2
[    2.310983] rk_iommu fdb60f00.iommu: version = 2
[    2.311125] rk_iommu fdb70f00.iommu: version = 2
[    2.311257] rk_iommu fdb90480.iommu: version = 2
[    2.311409] rk_iommu fdba0800.iommu: version = 2
[    2.311560] rk_iommu fdba4800.iommu: version = 2
[    2.311719] rk_iommu fdba8800.iommu: version = 2
[    2.311871] rk_iommu fdbac800.iommu: version = 2
[    2.312022] rk_iommu fdbb0800.iommu: version = 2
[    2.312174] rk_iommu fdbdf000.iommu: version = 2
[    2.312388] rk_iommu fdbef000.iommu: version = 2
[    2.312618] rk_iommu fdc38700.iommu: version = 2
[    2.312855] rk_iommu fdc48700.iommu: version = 2
[    mmu: version = 2
[    2.313116] rk_iommu fdd97e00.iommu: version = 2
[    2.313351] usbcore: registered new interface driver usbfs
[    2.313364] usbcore: registered new interface driver hub
[    2.313377] usbcore: registered new device driver usb
[    2.313407] mc: Linux media interface: v0.10
[    2.313415] videodev: Linux video capture interface: v2.00
[    2.313435] pps_core: LinuxPPS API ver. 1 registered
[    2.313438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    2.313444] PTP clock support registered
[    2.313644] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled.
[    2.313674] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0
[    2.314499] Advanced Linux Sound Architecture Driver Initialized.
[    2.314665] Bluetooth: Core ver 2.22
[    2.314676] NET: Registered protocol family 31
[    2.314680] Bluetooth: HCI device and connection manager initialized
[    2.314685] Bluetooth: HCI socket layer initialized
[    2.314689] Bluetooth: L2CAP socket layer initialized
[    2.314695] Bluetooth: SCO socket layer initialized
[    2.315962] rockchip-cpuinfo cpuinfo: SoC            : 35880000
[    2.315966] rockchip-cpuinfo cpuinfo: Serial         : b82e58b2f6342537
[    2.316217] clocksource: Switched to clocksource arch_sys_counter
[    2.578189] NET: Registered protocol family 2
[    2.578292] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[    2.580206] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    2.580296] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    2.580627] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    2.581395] TCP: Hash tables configured (established 65536 bind 65536)
[    2.581441] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.581593] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    2.581786] NET: Registered protocol family 1
[    2.582028] RPC: Registered named UNIX socket transport module.
[    2.582032] RPC: Registered udp transport module.
[    2.582034] RPC: Registered tcp transport module.
[    2.582037] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    2.582352] PCI: CLS 0 bytes, default 64
[    2.582562] Trying to unpack rootfs image as initramfs...
[    2.787260] Freeing initrd memory: 9016K
[    2.787828] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    2.788204] kvm [1]: IPA Size Limit: 40 bits
[    2.788216] kvm [1]: GICv3: no GICV resource entry
[    2.788220] kvm [1]: disabling GICv2 emulation
[    2.788223] kvm [1]: GIC system register CPU interface enabled
[    2.788328] kvm [1]: vgic interrupt IRQ9
[    2.788455] kvm [1]: VHE mode initialized successfully
[    2.790804] Initialise system trusted keyrings
[    2.790899] workingset: timestamp_bits=46 max_order=21 bucket_order=0
[    2.792817] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.793067] NFS: Registering the id_resolver key type
[    2.793076] Key type id_resolver registered
[    2.793079] Key type id_legacy registered
[    2.793085] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    2.793662] Key type cifs.spnego registered
[    2.793669] Key type cifs.idmap registered
[    2.793673] ntfs: driver 2.1.32 [Flags: R/O].
[    2.793722] jffs2: version 2.2. (NAND) ? 2001-2006 Red Hat, Inc.
[    2.793804] fuse: init (API version 7.32)
[    2.793933] SGI XFS with security attributes, no debug enabled
[    2.814730] NET: Registered protocol family 38
[    2.814737] xor: measuring software checksum speed
[    2.816144]    8regs           :  7017 MB/sec
[    2.817319]    32regs          :  8428 MB/sec
[    2.818194]    arm64_neon      : 11313 MB/sec
[    2.818198] xor: using function: arm64_neon (11313 MB/sec)
[    2.818203] Key type asymmetric registered
[    2.818207] Asymmetric key parser 'x509' registered
[    2.818221] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
[    2.818297] io scheduler mq-deadline registered
[    2.818303] io scheduler kyber registered
[    2.818697] rockchip-csi2-dphy-hw fedc0000.csi2-dphy0-hw: csi2 dphy hw probe successfully!
[    2.818884] rockchip-csi2-dphy csi2-dphy0: csi2 dphy0 probe successfully!
[    2.820629] rockchip-usb2phy fd5d8000.syscon:usb2-phy@8000: failed to create phy
[    2.820973] rockchip-usb2phy fd5dc000.syscon:usb2-phy@c000: failed to create phy
[    2.821430] rockchip-usb2phy fd5d4000.syscon:usb2-phy@4000: failed to create phy
[    2.822851] rockchip-hdptx-phy-hdmi fed60000.hdmiphy: hdptx phy init success
[    2.823708] Firefly gpio driver init!
[    2.823783] Firefly gpio driver register return : 0
[    2.824642] iep: Module initialized.
[    2.824670] mpp_service mpp-srv: 75e32fd43421 author: daijh 2022-11-02 Merge branch 'rk3588/rockchip' into rk3588/firefly
[    2.824674] mpp_service mpp-srv: probe start
[    2.825983] mpp_vdpu2 fdb50400.vdpu: Adding to iommu group 1
[    2.826004] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.826180] mpp_vdpu2 fdb50400.vdpu: probe device
[    2.826277] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    2.826284] mpp_vdpu2 fdb50400.vdpu: reset_group->rw_sem_on=0
[    2.826383] mpp_vdpu2 fdb50400.vdpu: probing finish
[    2.826542] mpp_vepu2 jpege-ccu: probing start
[    2.826547] mpp_vepu2 jpege-ccu: probing finish
[    2.826627] mpp_vepu2 fdba0000.jpege-core: Adding to iommu group 5
[    2.826637] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.826761] mpp_vepu2 fdba0000.jpege-core: probing start
[    2.826846] mpp_vepu2 fdba0000.jpege-core: attach ccu success
[    2.826936] mpp_vepu2 fdba0000.jpege-core: probing finish
[    2.827010] mpp_vepu2 fdba4000.jpege-core: Adding to iommu group 6
[    2.827020] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.827141] mpp_vepu2 fdba4000.jpege-core: probing start
[    2.827217] mpp_vepu2 fdba4000.jpege-core: attach ccu success
[    2.827302] mpp_vepu2 fdba4000.jpege-core: probing finish
[    2.827374] mpp_vepu2 fdba8000.jpege-core: Adding to iommu group 7
[    2.827383] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.827521] mpp_vepu2 fdba8000.jpege-core: probing start
[    2.827596] mpp_vepu2 fdba8000.jpege-core: attach ccu success
[    2.827679] mpp_vepu2 fdba8000.jpege-core: probing finish
[    2.827751] mpp_vepu2 fdbac000.jpege-core: Adding to iommu group 8
[    2.827760] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.827877] mpp_vepu2 fdbac000.jpege-core: probing start
[    2.827951] mpp_vepu2 fdbac000.jpege-core: attach ccu success
[    2.828037] mpp_vepu2 fdbac000.jpege-core: probing finish
[    2.828238] mpp-iep2 fdbb0000.iep: Adding to iommu group 9
[    2.828248] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.828364] mpp-iep2 fdbb0000.iep: probe device
[    2.828461] mpp-iep2 fdbb0000.iep: allocate roi buffer failed
[    2.828542] mpp-iep2 fdbb0000.iep: probing finish
[    2.828700] mpp_jpgdec fdb90000.jpegd: Adding to iommu group 4
[    2.828709] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.828882] mpp_jpgdec fdb90000.jpegd: probe device
[    2.829051] mpp_jpgdec fdb90000.jpegd: probing finish
[    2.829328] mpp_rkvdec2 fdc30000.rkvdec-ccu: rkvdec-ccu, probing start
[    2.829371] mpp_rkvdec2 fdc30000.rkvdec-ccu: probing finish
[    2.829430] mpp_rkvdec2 fdc38100.rkvdec-core: Adding to iommu group 12
[    2.829440] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.829653] mpp_rkvdec2 fdc38100.rkvdec-core: rkvdec-core, probing start
[    2.829743] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_a is not found!
[    2.829746] rkvdec2_init:1008: No niu aclk reset resource define
[    2.829750] mpp_rkvdec2 fdc38100.rkvdec-core: shared_niu_h is not found!
[    2.829753] rkvdec2_init:1011: No niu hclk reset resource define
[    2.829767] mpp_rkvdec2 fdc38100.rkvdec-core: no regulator, devfreq is disabled
[    2.829820] mpp_rkvdec2 fdc38100.rkvdec-core: core_mask=00010001
[    2.829823] mpp_rkvdec2 fdc38100.rkvdec-core: attach ccu as core 0
[    2.829972] mpp_rkvdec2 fdc38100.rkvdec-core: sram_start 0x00000000ff001000
[    2.829977] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_iova 0x00000000fff00000
[    2.829980] mpp_rkvdec2 fdc38100.rkvdec-core: sram_size 491520
[    2.829984] mpp_rkvdec2 fdc38100.rkvdec-core: rcb_size 1048576
[    2.829988] mpp_rkvdec2 fdc38100.rkvdec-core: min_width 512
[    2.830011] mpp_rkvdec2 fdc38100.rkvdec-core: probing finish
[    2.830065] mpp_rkvdec2 fdc48100.rkvdec-core: Adding to iommu group 13
[    2.830074] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.830267] mpp_rkvdec2 fdc48100.rkvdec-core: rkvdec-core, probing start
[    2.830353] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_a is not found!
[    2.830357] rkvdec2_init:1008: No niu aclk reset resource define
[    2.830360] mpp_rkvdec2 fdc48100.rkvdec-core: shared_niu_h is not found!
[    2.830363] rkvdec2_init:1011: No niu hclk reset resource define
[    2.830376] mpp_rkvdec2 fdc48100.rkvdec-core: no regulator, devfreq is disabled
[    2.830410] mpp_rkvdec2 fdc48100.rkvdec-core: core_mask=00020002
[    2.830425] mpp_rkvdec2 fdc48100.rkvdec-core: attach ccu as core 1
[    2.830584] mpp_rkvdec2 fdc48100.rkvdec-core: sram_start 0x00000000ff079000
[    2.830588] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_iova 0x00000000ffe00000
[    2.830591] mpp_rkvdec2 fdc48100.rkvdec-core: sram_size 487424
[    2.830594] mpp_rkvdec2 fdc48100.rkvdec-core: rcb_size 1048576
[    2.830598] mpp_rkvdec2 fdc48100.rkvdec-core: min_width 512
[    2.830622] mpp_rkvdec2 fdc48100.rkvdec-core: probing finish
[    2.830754] mpp_rkvenc2 rkvenc-ccu: probing start
[    2.830758] mpp_rkvenc2 rkvenc-ccu: probing finish
[    2.830840] mpp_rkvenc2 fdbd0000.rkvenc-core: Adding to iommu group 10
[    2.830849] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.831001] mpp_rkvenc2 fdbd0000.rkvenc-core: probing start
[    2.831016] mpp_rkvenc2 fdbd0000.rkvenc-core: link mode task capacity 8
[    2.831123] mpp_rkvenc2 fdbd0000.rkvenc-core: attach ccu as core 0
[    2.831218] mpp_rkvenc2 fdbd0000.rkvenc-core: probing finish
[    2.831273] mpp_rkvenc2 fdbe0000.rkvenc-core: Adding to iommu group 11
[    2.831282] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.831479] mpp_rkvenc2 fdbe0000.rkvenc-core: probing start
[    2.831492] mpp_rkvenc2 fdbe0000.rkvenc-core: link mode task capacity 8
[    2.831622] mpp_rkvenc2 fdbe0000.rkvenc-core: attach ccu as core 1
[    2.831719] mpp_rkvenc2 fdbe0000.rkvenc-core: probing finish
[    2.832118] mpp_av1dec: Adding child /av1d@fdc70000
[    2.832175] mpp_av1dec: register device av1d-master
[    2.832198] mpp_av1dec av1d-master: av1_iommu_of_xlate,784
[    2.832213] av1_iommu_probe_device,736, consumer : av1d-master, supplier : fdca0000.iommu
[    2.832241] mpp_av1dec av1d-master: Adding to iommu group 16
[    2.832251] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.832432] mpp_av1dec av1d-master: probing start
[    2.832611] mpp_av1dec av1d-master: probing finish
[    2.832636] mpp_service mpp-srv: probe success
[    2.838389] dma-pl330 fea10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.838396] dma-pl330 fea10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.839075] dma-pl330 fea30000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.839081] dma-pl330 fea30000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.839768] dma-pl330 fed10000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.839774] dma-pl330 fed10000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16
[    2.840077] rockchip-pvtm fda40000.pvtm: pvtm@0 probed
[    2.840119] rockchip-pvtm fda50000.pvtm: pvtm@1 probed
[    2.840158] rockchip-pvtm fda60000.pvtm: pvtm@2 probed
[    2.840197] rockchip-pvtm fdaf0000.pvtm: pvtm@3 probed
[    2.840237] rockchip-pvtm fdb30000.pvtm: pvtm@4 probed
[    2.840621] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.841537] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[    2.841830] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 28, base_baud = 1500000) is a 16550A
[    2.842111] feb40000.serial: ttyS1 at MMIO 0xfeb40000 (irq = 87, base_baud = 1500000) is a 16550A
[    2.842307] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 88, base_baud = 1500000) is a 16550A
[    2.843271] random: fast init done
[    2.843359] random: crng init done
[    2.843862] rockchip-vop2 fdd90000.vop: Adding to iommu group 15
[    2.843875] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    2.848552] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp0 assign plane mask: 0x5, primary plane phy id: 2
[    2.848564] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp1 assign plane mask: 0xa, primary plane phy id: 3
[    2.848577] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp2 assign plane mask: 0x140, primary plane phy id: 8
[    2.848584] rockchip-vop2 fdd90000.vop: [drm:vop2_bind] vp3 assign plane mask: 0x280, primary plane phy id: 9
[    2.848643] rockchip-drm display-subsystem: failed to get hdmi1_phy_pll: -517
[    2.848819] [drm] failed to init overlay plane Cluster0-win1
[    2.848845] [drm] failed to init overlay plane Cluster1-win1
[    2.848871] [drm] failed to init overlay plane Cluster2-win1
[    2.848895] [drm] failed to init overlay plane Cluster3-win1
[    2.856552] rockchip-drm display-subsystem: bound fdd90000.vop (ops 0xffffffc011721660)
[    2.857215] dwhdmi-rockchip fde80000.hdmi: registered ddc I2C bus driver
[    2.857342] rockchip-drm display-subsystem: bound fde80000.hdmi (ops 0xffffffc011729568)
[    2.857782] rockchip-drm display-subsystem: route-hdmi0: failed to get logo,offset
[    2.857788] rockchip-drm display-subsystem: can't not find any logo display
[    2.857794] rockchip-drm display-subsystem: failed to show kernel logo
[    2.857834] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    2.857875] rockchip-drm display-subsystem: [drm] Cannot find any crtc or sizes
[    2.858251] [drm] Initialized rockchip 3.0.0 20140818 for display-subsystem on minor 0
[    2.863248] brd: module loaded
[    2.865960] loop: module loaded
[    2.866145] zram: Added device: zram0
[    2.866269] lkdtm: No crash points registered, enable through debugfs
[    2.866616] system_heap: orders[0] = 6
[    2.866620] system_heap: orders[1] = 4
[    2.866624] system_heap: orders[2] = 0
[    2.868113] rockchip-spi feb20000.spi: no high_speed pinctrl state
[    2.869054] rk806 spi2.0: chip id: RK806,ver:0x2, 0x1
[    2.869280] rk806 spi2.0: ON: 0x40 OFF:0x0
[    2.870900] vdd_gpu_s0: supplied by vcc5v0_sys
[    2.871888] vdd_cpu_lit_s0: supplied by vcc5v0_sys
[    2.872403] vdd_log_s0: supplied by vcc5v0_sys
[    2.872921] vdd_vdenc_s0: supplied by vcc5v0_sys
[    2.873489] vdd_ddr_s0: supplied by vcc5v0_sys
[    2.873824] vdd2_ddr_s3: supplied by vcc5v0_sys
[    2.874336] vdd_2v0_pldo_s3: supplied by vcc5v0_sys
[    2.874794] vcc_3v3_s3: supplied by vcc5v0_sys
[    2.875239] vddq_ddr_s0: supplied by vcc5v0_sys
[    2.875746] vcc_1v8_s3: supplied by vcc5v0_sys
[    2.876260] vdd_0v75_s3: supplied by vcc_1v1_nldo_s3
[    2.876780] vdd_ddr_pll_s0: supplied by vcc_1v1_nldo_s3
[    2.877232] avdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.877685] vdd_0v85_s0: supplied by vcc_1v1_nldo_s3
[    2.878132] vdd_0v75_s0: supplied by vcc_1v1_nldo_s3
[    2.878612] avcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.879131] vcc_1v8_s0: supplied by vdd_2v0_pldo_s3
[    2.879648] avdd_1v2_s0: supplied by vdd_2v0_pldo_s3
[    2.880168] vcc_3v3_s0: supplied by vcc5v0_sys
[    2.880611] vccio_sd_s0: supplied by vcc5v0_sys
[    2.881072] pldo6_s3: supplied by vcc5v0_sys
[    2.881458] rk806 spi2.0: no sleep-setting state
[    2.881463] rk806 spi2.0: no reset-setting pinctrl state
[    2.881467] rk806 spi2.0: no dvs-setting pinctrl state
[    2.883064] register firefly_spi_init spi return v = :0
[    2.883336] wireguard: allowedips self-tests: pass
[    2.887744] wireguard: nonce counter self-tests: pass
[    3.159120] wireguard: ratelimiter self-tests: pass
[    3.159210] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
[    3.159215] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
[    3.159572] tun: Universal TUN/TAP device driver, 1.6
[    3.159714] CAN device driver interface
[    3.160697] rk_gmac-dwmac fe1b0000.ethernet: IRQ eth_lpi not found
[    3.160842] rk_gmac-dwmac fe1b0000.ethernet: no regulator found
[    3.160847] rk_gmac-dwmac fe1b0000.ethernet: clock input or output? (output).
[    3.160853] rk_gmac-dwmac fe1b0000.ethernet: TX delay(0x45).
[    3.160857] rk_gmac-dwmac fe1b0000.ethernet: Can not read property: rx_delay.
[    3.160861] rk_gmac-dwmac fe1b0000.ethernet: set rx_delay to 0xffffffff
[    3.160874] rk_gmac-dwmac fe1b0000.ethernet: integrated PHY? (no).
[    3.160879] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_rx
[    3.160884] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock mac_clk_tx
[    3.160895] rk_gmac-dwmac fe1b0000.ethernet: cannot get clock clk_mac_speed
[    3.161112] rk_gmac-dwmac fe1b0000.ethernet: init for RGMII_RXID
[    3.161247] rk_gmac-dwmac fe1b0000.ethernet: User ID: 0x30, Synopsys ID: 0x51
[    3.161253] rk_gmac-dwmac fe1b0000.ethernet:         DWMAC4/5
[    3.161258] rk_gmac-dwmac fe1b0000.ethernet: DMA HW capability register supported
[    3.161262] rk_gmac-dwmac fe1b0000.ethernet: RX Checksum Offload Engine supported
[    3.161266] rk_gmac-dwmac fe1b0000.ethernet: TX Checksum insertion supported
[    3.161270] rk_gmac-dwmac fe1b0000.ethernet: Wake-Up On Lan supported
[    3.161305] rk_gmac-dwmac fe1b0000.ethernet: TSO supported
[    3.161309] rk_gmac-dwmac fe1b0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[    3.161314] rk_gmac-dwmac fe1b0000.ethernet: Enabled Flow TC (entries=2)
[    3.161318] rk_gmac-dwmac fe1b0000.ethernet: TSO feature enabled
[    3.161323] rk_gmac-dwmac fe1b0000.ethernet: Using 32 bits DMA width
[    3.297359] usbcore: registered new interface driver asix
[    3.297391] usbcore: registered new interface driver ax88179_178a
[    3.297404] usbcore: registered new interface driver cdc_ether
[    3.297417] usbcore: registered new interface driver net1080
[    3.297432] usbcore: registered new interface driver cdc_subset
[    3.297444] usbcore: registered new interface driver zaurus
[    3.297463] usbcore: registered new interface driver cdc_ncm
[    3.297477] usbcore: registered new interface driver qmi_wwan_q
[    3.297489] usbcore: registered new interface driver qmi_wwan
[    3.304678] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.304729] ehci-pci: EHCI PCI platform driver
[    3.304790] ehci-platform: EHCI generic platform driver
[    3.305335] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.305357] ohci-platform: OHCI generic platform driver
[    3.306246] usbcore: registered new interface driver cdc_acm
[    3.306258] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.306301] usbcore: registered new interface driver cdc_wdm
[    3.306383] usbcore: registered new interface driver usbserial_generic
[    3.306411] usbserial: USB Serial support registered for generic
[    3.306451] usbcore: registered new interface driver ch341
[    3.306476] usbserial: USB Serial support registered for ch341-uart
[    3.306513] usbcore: registered new interface driver cp210x
[    3.306538] usbserial: USB Serial support registered for cp210x
[    3.306573] usbcore: registered new interface driver ftdi_sio
[    3.306599] usbserial: USB Serial support registered for FTDI USB Serial Device
[    3.306635] usbcore: registered new interface driver keyspan
[    3.306660] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    3.306686] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    3.306713] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    3.306738] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    3.306774] usbcore: registered new interface driver option
[    3.306799] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.306834] usbcore: registered new interface driver oti6858
[    3.306858] usbserial: USB Serial support registered for oti6858
[    3.306893] usbcore: registered new interface driver pl2303
[    3.306918] usbserial: USB Serial support registered for pl2303
[    3.306954] usbcore: registered new interface driver qcserial
[    3.306978] usbserial: USB Serial support registered for Qualcomm USB modem
[    3.307017] usbcore: registered new interface driver sierra
[    3.307043] usbserial: USB Serial support registered for Sierra USB modem
[    3.307147] udc-core: couldn't find an available UDC - added [g_ether] to list of pending drivers
[    3.307159] udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers
[    3.308006] [HXTP] himax_hx83102_init
[    3.308018] [HXTP] himax_hx83102_probe:Enter
[    3.308027] [HXTP] Himax common touch panel driver init
[    3.308134] usbcore: registered new interface driver usbtouchscreen
[    3.309722] input: rk805 pwrkey as /devices/platform/feb20000.spi/spi_master/spi2/spi2.0/rk805-pwrkey.3.auto/input/input0
[    3.310265] i2c /dev entries driver
[    3.314414] vdd_cpu_big0_s0: supplied by vcc5v0_sys
[    3.323421] vdd_cpu_big1_s0: supplied by vcc5v0_sys
[    3.333446] vdd_npu_s0: supplied by vcc5v0_sys
[    3.341639] pca953x 6-0021: supply vcc not found, using dummy regulator
[    3.341782] pca953x 6-0021: using no AI
[    3.343330] rtc-hym8563 6-0051: could not init device, -6
[    3.345603] rkcifhw fdce0000.rkcif: Adding to iommu group 14
[    3.345662] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.346254] rkcifhw fdce0000.rkcif: No reserved memory region assign to CIF
[    3.347815] rockchip-mipi-csi2: probe success, v4l2_dev:(efault)!
[    3.350747] usbcore: registered new interface driver uvcvideo
[    3.350767] USB Video Class driver (1.1.1)
[    3.354910] rockchip-thermal fec00000.tsadc: Missing rockchip,grf property
[    3.355885] rockchip-thermal fec00000.tsadc: tsadc is probed successfully!
[    3.357093] device-mapper: ioctl: 4.44.0-ioctl (2021-02-01) initialised: dm-devel@redhat.com
[    3.357269] Bluetooth: HCI UART driver ver 2.3
[    3.357284] Bluetooth: HCI UART protocol H4 registered
[    3.357293] Bluetooth: HCI UART protocol ATH3K registered
[    3.357351] usbcore: registered new interface driver bfusb
[    3.358391] cpu cpu0: bin=0
[    3.358587] cpu cpu0: leakage=10
[    3.360157] cpu cpu0: pvtm=1428
[    3.360331] cpu cpu0: pvtm-volt-sel=1
[    3.362709] cpu cpu4: bin=0
[    3.362910] cpu cpu4: leakage=8
[    3.369574] cpu cpu4: pvtm=1672
[    3.373690] cpu cpu4: pvtm-volt-sel=3
[    3.376791] cpu cpu6: bin=0
[    3.376989] cpu cpu6: leakage=8
[    3.383677] cpu cpu6: pvtm=1658
[    3.387789] cpu cpu6: pvtm-volt-sel=3
[    3.390321] cpu cpu0: avs=0
[    3.391927] cpu cpu4: avs=0
[    3.393542] cpu cpu6: avs=0
[    3.394065] cpu cpu0: EM: created perf domain
[    3.394146] cpu cpu0: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=1608000000 h_table=0
[    3.394831] cpu cpu4: EM: created perf domain
[    3.394862] cpu cpu4: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    3.403424] cpu cpu6: EM: created perf domain
[    3.403461] cpu cpu6: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=2208000000 h_table=0
[    3.413436] using random self ethernet address
[    3.413450] using random host ethernet address
[    3.413653] usb0: HOST MAC ba:35:55:f0:9c:92
[    3.413658] usb0: MAC d6:17:2a:d0:e0:65
[    3.413671] using random self ethernet address
[    3.413675] using random host ethernet address
[    3.413707] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[    3.413712] g_ether gadget: g_ether ready
[    3.417624] sdhci: Secure Digital Host Controller Interface driver
[    3.417649] sdhci: Copyright(c) Pierre Ossman
[    3.417654] Synopsys Designware Multimedia Card Interface Driver
[    3.417968] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.420033] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    3.420105] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
[    3.421159] cryptodev: driver 1.12 loaded.
[    3.421223] hid: raw HID events driver (C) Jiri Kosina
[    3.421534] usbcore: registered new interface driver usbhid
[    3.421543] usbhid: USB HID core driver
[    3.425345] Firefly adc init
[    3.425360] Firefly adc-->FIREFLY_ADC_SAMPLE_JIFFIES:  16
[    3.425367] Firefly adc-->MSEC_PER_SEC:  1000
[    3.425374] Firefly adc-->HZ:  300
[    3.425607] Firefly adc-->ret:  0
[    3.425792] optee: probing for conduit method.
[    3.425815] optee: revision 3.13 (4542e1ef)
[    3.426223] optee: initialized driver
[    3.426830] usbcore: registered new interface driver snd-usb-audio
[    3.433634] input: rockchip-hdmi0 rockchip-hdmi0 as /devices/platform/hdmi0-sound/sound/card0/input1
[    3.435392] Initializing XFRM netlink socket
[    3.435576] NET: Registered protocol family 10
[    3.436179] Segment Routing with IPv6
[    3.436312] NET: Registered protocol family 17
[    3.436324] NET: Registered protocol family 15
[    3.436350] Bridge firewalling registered
[    3.436354] can: controller area network core
[    3.436379] NET: Registered protocol family 29
[    3.436384] can: raw protocol
[    3.436388] can: broadcast manager protocol
[    3.436395] can: netlink gateway - max_hops=1
[    3.436797] Bluetooth: RFCOMM TTY layer initialized
[    3.436812] Bluetooth: RFCOMM socket layer initialized
[    3.436827] Bluetooth: RFCOMM ver 1.11
[    3.436835] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.436839] Bluetooth: BNEP filters: protocol multicast
[    3.436845] Bluetooth: BNEP socket layer initialized
[    3.436850] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.436855] Bluetooth: HIDP socket layer initialized
[    3.436886] 8021q: 802.1Q VLAN Support v1.8
[    3.436902] [BT_RFKILL]: Enter rfkill_rk_init
[    3.436906] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.437186] Key type dns_resolver registered
[    3.438090] xc7160 3-001b: T-chip firefly camera driver version: 00.01.04
[    3.438120] xc7160 3-001b: Failed to get power-gpios, maybe no use
[    3.438164] xc7160 3-001b: supply avdd not found, using dummy regulator
[    3.438232] xc7160 3-001b: supply dovdd not found, using dummy regulator
[    3.438258] xc7160 3-001b: supply dvdd not found, using dummy regulator
[    3.438283] xc7160 3-001b: could not get default pinstate
[    3.438288] xc7160 3-001b: could not get sleep pinstate
[    3.438300] xc7160 3-001b: Success to get xc7160 endpoint data lanes, dts uses 4 lanes
[    3.446292] mmc0: SDHCI controller on fe2e0000.mmc [fe2e0000.mmc] using ADMA
[    3.478551] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    3.479278] mmcblk0: mmc0:0001 Y2P064 58.2 GiB
[    3.479497] mmcblk0boot0: mmc0:0001 Y2P064 partition 1 4.00 MiB
[    3.479748] mmcblk0boot1: mmc0:0001 Y2P064 partition 2 4.00 MiB
[    3.479986] mmcblk0rpmb: mmc0:0001 Y2P064 partition 3 16.0 MiB, chardev (234:0)
[    3.483238]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
[    3.517413] dwc3 fc000000.usb: device reset
[    3.553080] rk3x-i2c feab0000.i2c: timeout, ipd: 0x90, state: 3
[    3.553111] xc7160 3-001b: write XC7160_REG_HIGH_SELECT failed
[    3.553382] xc7160: probe of 3-001b failed with error -5
[    3.553722] registered taskstats version 1
[    3.553731] Loading compiled-in X.509 certificates
[    3.554995] Btrfs loaded, crc32c=crc32c-generic
[    3.555134] pstore: Using crash dump compression: deflate
[    3.555921] rga3_core0 fdb60000.rga: Adding to iommu group 2
[    3.555947] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.556159] rga: rga3_core0_irq, irq = 34, match scheduler
[    3.556589] rga: rga3_core0 hardware loaded successfully, hw_version:3.0.76831.
[    3.556654] rga: rga3_core0 probe successfully
[    3.557068] rga3_core1 fdb70000.rga: Adding to iommu group 3
[    3.557090] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.557270] rga: rga3_core1_irq, irq = 35, match scheduler
[    3.557670] rga: rga3_core1 hardware loaded successfully, hw_version:3.0.76831.
[    3.557726] rga: rga3_core1 probe successfully
[    3.558103] rga: rga2_irq, irq = 36, match scheduler
[    3.558616] rga: rga2 hardware loaded successfully, hw_version:3.2.63318.
[    3.558632] rga: rga2 probe successfully
[    3.558877] rga2_mmu: IOMMU binding successfully, default mapping core[0x1]
[    3.559110] rga: Module initialized. v1.2.20
[    3.559120]
[    3.559126] ********************************************************************
[    3.559133] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    3.559138] **                                                                **
[    3.559145] **  WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **
[    3.559150] **                                                                **
[    3.559156] ** This means that this kernel is built to expose clk operations  **
[    3.559162] ** such as parent or rate setting, enabling, disabling, etc.      **
[    3.559167] ** to userspace, which may compromise security on your system.    **
[    3.559173] **                                                                **
[    3.559178] ** If you see this message and you are not debugging the          **
[    3.559184] ** kernel, report this immediately to your vendor!                **
[    3.559189] **                                                                **
[    3.559195] **     NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE           **
[    3.559200] ********************************************************************
[    3.567541] vendor storage:20190527 ret = 0
[    3.596896] mali fb000000.gpu: Kernel DDK version g13p0-01eac0
[    3.597076] vcc5v0_host: supplied by vcc5v0_usb
[    3.597592] mali fb000000.gpu: leakage=14
[    3.597651] debugfs: Directory 'fb000000.gpu-mali' with parent 'vdd_gpu_s0' already present!
[    3.597745] vcc5v0_host3: supplied by vcc5v0_usb
[    3.599012] mali fb000000.gpu: pvtm=853
[    3.599048] mali fb000000.gpu: pvtm-volt-sel=2
[    3.599798] mali fb000000.gpu: avs=0
[    3.599898] W : [File] : drivers/gpu/arm/bifrost/platform/rk/mali_kbase_config_rk.c; [Line] : 136; [Func] : kbase_platform_rk_init(); power-off-delay-ms not available.
[    3.600432] mali fb000000.gpu: GPU hardware issue table may need updating:
[    3.600432] r0p0 status 5 is unknown; treating as r0p0 status 0
[    3.600446] mali fb000000.gpu: GPU identified as 0x7 arch 10.8.6 r0p0 status 0
[    3.600547] mali fb000000.gpu: No priority control manager is configured
[    3.600559] mali fb000000.gpu: No memory group manager is configured
[    3.600587] mali fb000000.gpu: Protected memory allocator not available
[    3.601029] mali fb000000.gpu: Capping CSF_FIRMWARE_TIMEOUT to CSF_FIRMWARE_PING_TIMEOUT
[    3.601419] pcie30_avdd1v8: supplied by avcc_1v8_s0
[    3.601883] mali fb000000.gpu: Couldn't find power_model DT node matching 'arm,mali-simple-power-model'
[    3.601898] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[    3.602102] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[    3.602281] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.ts = 4*[0]
[    3.602463] mali fb000000.gpu: Error -22, no DT entry: mali-simple-power-model.thermal-zone = ''
[    3.604308] pcie30_avdd0v75: supplied by avdd_0v75_s0
[    3.605154] mali fb000000.gpu: Using configured power model mali-lodx-power-model, and fallback mali-simple-power-model
[    3.605344] mali fb000000.gpu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    3.606177] mali fb000000.gpu: Probed as mali0
[    3.606612] rockchip-dmc dmc: leakage=31
[    3.606630] rockchip-dmc dmc: leakage-volt-sel=0
[    3.607079] rockchip-dmc dmc: avs=0
[    3.607097] rockchip-dmc dmc: current ATF version 0x100
[    3.607214] rockchip-dmc dmc: normal_rate = 1560000000
[    3.607225] rockchip-dmc dmc: reboot_rate = 2112000000
[    3.607234] rockchip-dmc dmc: suspend_rate = 528000000
[    3.607242] rockchip-dmc dmc: video_4k_rate = 1560000000
[    3.607250] rockchip-dmc dmc: video_4k_10b_rate = 1560000000
[    3.607259] rockchip-dmc dmc: video_svep_rate = 1560000000
[    3.607267] rockchip-dmc dmc: boost_rate = 2112000000
[    3.607275] rockchip-dmc dmc: fixed_rate(isp|cif0|cif1|dualview) = 2112000000
[    3.607283] rockchip-dmc dmc: performance_rate = 2112000000
[    3.607292] rockchip-dmc dmc: hdmirx_rate = 2112000000
[    3.607304] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[    3.607311] rockchip-dmc dmc: failed to get vop pn to msch rl
[    3.607440] rockchip-dmc dmc: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.607745] rockchip-dmc dmc: could not find power_model node
[    3.625182] using random self ethernet address
[    3.625200] using random host ethernet address
[    3.625892] usb1: HOST MAC fe:bc:54:b0:fd:62
[    3.625901] usb1: MAC 16:f5:20:f7:02:e0
[    3.625936] g_cdc gadget: CDC Composite Gadget, version: King Kamehameha Day 2008
[    3.625943] g_cdc gadget: g_cdc ready
[    3.626780] input: adc-keys as /devices/platform/adc-keys/input/input2
[    3.631896] dwc3 fc000000.usb: device disconnect
[    3.635043] ohci-platform fc8c0000.usb: Generic Platform OHCI controller
[    3.635270] ohci-platform fc8c0000.usb: new USB bus registered, assigned bus number 1
[    3.635396] ohci-platform fc8c0000.usb: irq 23, io mem 0xfc8c0000
[    3.694381] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    3.694458] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.694486] usb usb1: Product: Generic Platform OHCI controller
[    3.694512] usb usb1: Manufacturer: Linux 5.10.110 ohci_hcd
[    3.694541] usb usb1: SerialNumber: fc8c0000.usb
[    3.695835] hub 1-0:1.0: USB hub found
[    3.695945] hub 1-0:1.0: 1 port detected
[    3.698159] ehci-platform fc880000.usb: EHCI Host Controller
[    3.698466] ehci-platform fc880000.usb: new USB bus registered, assigned bus number 2
[    3.698658] ehci-platform fc880000.usb: irq 22, io mem 0xfc880000
[    3.709752] ehci-platform fc880000.usb: USB 2.0 started, EHCI 1.00
[    3.710250] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.710284] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.710311] usb usb2: Product: EHCI Host Controller
[    3.710339] usb usb2: Manufacturer: Linux 5.10.110 ehci_hcd
[    3.710366] usb usb2: SerialNumber: fc880000.usb
[    3.711773] hub 2-0:1.0: USB hub found
[    3.711871] hub 2-0:1.0: 1 port detected
[    3.716622] ohci-platform fc840000.usb: Generic Platform OHCI controller
[    3.717454] ohci-platform fc840000.usb: new USB bus registered, assigned bus number 3
[    3.717758] ohci-platform fc840000.usb: irq 21, io mem 0xfc840000
[    3.737882] dwc3 fc400000.usb: device reset
[    3.777066] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.10
[    3.777085] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.777093] usb usb3: Product: Generic Platform OHCI controller
[    3.777101] usb usb3: Manufacturer: Linux 5.10.110 ohci_hcd
[    3.777108] usb usb3: SerialNumber: fc840000.usb
[    3.777590] hub 3-0:1.0: USB hub found
[    3.777616] hub 3-0:1.0: 1 port detected
[    3.779523] ehci-platform fc800000.usb: EHCI Host Controller
[    3.779733] ehci-platform fc800000.usb: new USB bus registered, assigned bus number 4
[    3.779815] ehci-platform fc800000.usb: irq 20, io mem 0xfc800000
[    3.793141] ehci-platform fc800000.usb: USB 2.0 started, EHCI 1.00
[    3.793598] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    3.793636] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.793664] usb usb4: Product: EHCI Host Controller
[    3.793691] usb usb4: Manufacturer: Linux 5.10.110 ehci_hcd
[    3.793715] usb usb4: SerialNumber: fc800000.usb
[    3.795067] hub 4-0:1.0: USB hub found
[    3.795159] hub 4-0:1.0: 1 port detected
[    3.800650] register spi return v = :0
[    3.802772] RKNPU fdab0000.npu: Adding to iommu group 0
[    3.802815] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[    3.802978] RKNPU fdab0000.npu: RKNPU: rknpu iommu is enabled, using iommu mode
[    3.803836] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode.
[    3.803860] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller.
[    3.803872] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a
[    3.803902] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 76,32 bit host data width,256 deep fifo
[    3.804161] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdab0000-0xfdabffff]
[    3.804183] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdac0000-0xfdacffff]
[    3.804199] RKNPU fdab0000.npu: can't request region for resource [mem 0xfdad0000-0xfdadffff]
[    3.804628] [drm] Initialized rknpu 0.8.2 20220829 for fdab0000.npu on minor 1
[    3.811343] RKNPU fdab0000.npu: leakage=8
[    3.811445] debugfs: Directory 'fdab0000.npu-rknpu' with parent 'vdd_npu_s0' already present!
[    3.818217] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.819334] RKNPU fdab0000.npu: pvtm=849
[    3.824845] RKNPU fdab0000.npu: pvtm-volt-sel=2
[    3.826145] RKNPU fdab0000.npu: avs=0
[    3.826420] RKNPU fdab0000.npu: l=10000 h=85000 hyst=5000 l_limit=0 h_limit=800000000 h_table=0
[    3.838441] RKNPU fdab0000.npu: failed to find power_model node
[    3.838483] RKNPU fdab0000.npu: RKNPU: failed to initialize power model
[    3.838500] RKNPU fdab0000.npu: RKNPU: failed to get dynamic-coefficient
[    3.840087] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.848552] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.850221] rockchip-pm rockchip-suspend: not set pwm-regulator-config
[    3.851549] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 405; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '17:07:37', on 'Jan 12 2023'.
[    3.852035] Mali:
[    3.852040] Mali device driver loaded
[    3.853376] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.853392] cfg80211: failed to load regulatory.db
[    3.859467] ret 1024 0
[    3.859640] ALSA device list:
[    3.859651]   #0: rockchip-hdmi0
[    3.865297] Freeing unused kernel memory: 7616K
[    3.883130] Run /init as init process
Loading, please wait...
/dev/console is Ok
starting version 237
[    4.597041] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    4.597554] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 5
[    4.597755] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000082002010010
[    4.597805] xhci-hcd xhci-hcd.5.auto: irq 110, io mem 0xfc000000
[    4.598183] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10
[    4.598197] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.598209] usb usb5: Product: xHCI Host Controller
[    4.598219] usb usb5: Manufacturer: Linux 5.10.110 xhci-hcd
[    4.598230] usb usb5: SerialNumber: xhci-hcd.5.auto
[    4.598993] hub 5-0:1.0: USB hub found
[    4.599031] hub 5-0:1.0: 1 port detected
[    4.599406] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    4.599644] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 6
[    4.599665] xhci-hcd xhci-hcd.5.auto: Host supports USB 3.0 SuperSpeed
[    4.599729] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.599872] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10
[    4.599884] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.599895] usb usb6: Product: xHCI Host Controller
[    4.599904] usb usb6: Manufacturer: Linux 5.10.110 xhci-hcd
[    4.599913] usb usb6: SerialNumber: xhci-hcd.5.auto
[    4.600403] hub 6-0:1.0: USB hub found
[    4.600431] hub 6-0:1.0: 1 port detected
[    4.646823] dwc3 fc400000.usb: device reset
[    4.913159] usb 5-1: new high-speed USB device number 2 using xhci-hcd
[    4.982008] dwc3 fc400000.usb: device reset
[    5.054283] usb 5-1: New USB device found, idVendor=23a9, idProduct=ef18, bcdDevice= 1.00
[    5.054367] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.054398] usb 5-1: Product: DISK
[    5.054424] usb 5-1: Manufacturer: USB
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Begin: Will now check root file system ... fsck from util-linux 2.36.1-4309-dirty
[/sbin/fsck.ext4 (1) -- /dev/mmcblk0p6] fsck.ext4 -a -C0 /dev/mmcblk0p6
Ubuntu20.04: clean, 100703/212992 files, 732188/832914 blocks
done.
[    5.614859] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Warning: overlayroot: configuring overlayroot with driver=overlay mode=device opts='dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' per kernel cmdline
[    5.756283] EXT4-fs (mmcblk0p7): recovery complete
[    5.756712] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
Success: overlayroot: configured root with 'device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' using overlay per kernel cmdline
Warning: Something odd, no /lib/modules/5.10.110 in initramfs.
done.
[    5.849178] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
[    6.011758] systemd[1]: System time before build time, advancing clock.
[    6.024669] systemd[1]: Failed to find module 'autofs4'
[    6.126997] systemd[1]: systemd 245.4-4ubuntu4.0firefly1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    6.127690] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 20.04.5 LTS!

[    6.130726] systemd[1]: Set hostname to <firefly>.
[    6.421491] systemd[1]: Created slice system-modprobe[.[l0i;c3e2m  OK  ] Created slice 0;1;39msystem-modprobe.slice.

[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Started Forward Password R…uests to Wall Directory Watch.
[  OK  ] Reached target User and Group Name Lookups.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target Slices.
[  OK  ] Reached target Swap.
[  OK  ] Listening on Syslog Socket.
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Listening on Journal Audit Socket.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on udev Kernel Socket.
[    6.422617] systemd[1]: Created slice system-serial\x2dgetty.slice.
[    6.423153] systemd[1]: Created slice User and Session Slice.
[    6.423438] systemd[1]: Started Forward Password Requ         Mounting Huge Pages File System...
ests to Wall Directory Watch.
[    6.424097] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
         Mounting POSIX Message Queue File System..Group Name Lookups.
                                                   .
[    6.424627] systemd[1]: Reached target Remote File Systems.
[    6.425155] systemd[1]: Reached target Slices.
[    6.425587] systemd[1]: Reached target Swap.
g    6.426220] systemd[1]: Listening on Sysl       o g  MSooucnkteitn.
  [0;1;39mKernel Debug File System...
   6.426536] systemd[1]: Listening on initctl Compatibility Named Pipe.
[    6.427355] systemd[1]: Listening on Journal Audit Socket.
         Mounting Kerd[1]: Listening on Journal Socket (/dev/log).
                     nel Trace File System...
[    6.428276] systemd[1]: Listening on Journal Socket.
[    6.428762] systemd[1]: Listening on udev Control Socket.
[    6.429201] systemd[1]: Listening on udev Kernel Socket.
[    6.431406] systemd[1]: Mounting Huge Pages File System...
[    6.433490] systemd[1         Starting Journal Service...
]: Mounting POSIX Message Queue File System...
[    6.435715] systemd[1]: Mounting Kernel Debug File System...
[    6.437580] systemd[1]: Mounting Kernel Trace File System...
[    6.440108] systemd[1]: Starting          Starting SeJt the console keyboard layouout...
rnal Service...
[    6.442060] systemd[1]: Starting Set the console keyboard layout...
[    6.444438] systemd[1]: Starting Create list of static device n         Starting Create list of std…odes for the current kernel[0m...
s for the current kernel...
[    6.445202] systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
[    6.446045] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[    6.448133] systemd[1]: Starting Loa d   K e r n e l  SMtoadrutlng Load Kernel Modules...
es...
[    6.450034] systemd[1]: Starting Remount Root and Kernel File Sys         Starting Remtount Root and Kernel File Systems...
ems...
[    6.453105] systemd[1]: Starting   u d e v   C o lSdtpalrutgi na udev Coldplug all Devices...
ll Devices...
[    6.457368] systemd[1]: Mounted Huge Pages File System.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted Kernel Trace File System.
[    6.458199] systemd[1]: Mounted POSIX Message Queue File System.
[    6.458670] systemd[1]: Moun[  OK  ] Finished Create list of st… tnodes for the current kernele.
d Kernel Debug File System.
[    6.459180] systemd[1]: Mounted Kernel Trace File System.
[    6.460431] systemd[1]: Finished Create list of static device nodes for the current kernel.
[    6.468622] systemd[1]: Finished Remount Root and Ker[n[l0 ;F3i2m  OK  ] Finished 39mRemount Root and Kernel Fiele Systems.
Systems.
[    6.470107] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[    6.471795] systemd[1]: Starting Platform Persistent Storage Arch         Starting Plaitform Persistent Storage Archival...
val...
[    6.474261] systemd[1]: Starting Load/Save Random Seed...
         Starting Load/Save Random Seed...
         Starting Create System Users...
[    6.476312] systemd[1]: Starting Create System Users...
[0 ; 3 2 m6 . 4O7K7 5 3[]0 ms]y sFtienmids[h1e]d:  [i0n;is1;39mLoad Kernel Modules.
hed Load Kernel Modules.
[    6.479968] systemd[1]: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[    6.482418] systemd[1]: Mounting Kernel Configuration File System         Mounting Ke.rnel Configuration File Syst.em...
.
[    6.484770] systemd[1]: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[    6.486994] systemd[1]: Finished Platform Persistent Storage Archiv[  OK  ] Finished aPlatform Persistentl Storage Archival.
.
[    6.490454] systemd[1]: Finished Load/Save Random Seed.
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Mounted FUSE Control File System.
[    6.491299] systemd[1]: Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configurati[o n   F i6l. System.
495707] systemd[1]: Mounted Kernel Configuration File System.
[  OK  ] Finished Apply Kernel Variables.
[  OK  ] Finished Create System Users.
[  OK  ] Started Journal Service.
         Starting Flush Journal to Persistent Storage...
         Starting Create Static Device Nodes in /dev...
[  OK  ] Finished Set the console keyboard layout.
[  OK  ] Finished Create Static Device Nodes in /dev.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
         Starting Set console font and keymap...
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting udev Kernel Device Manager...
[  OK  ] Finished Flush Journal to Persistent Storage.
[  OK  ] Finished Set console font and keymap.
         Starting Create Volatile Files and Directories...
[  OK  ] Finished Tell Plymouth To Write Out Runtime Data.
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Network Name Resolution...
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Finished udev Coldplug all Devices.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Finished Update UTMP about System Boot/Shutdown.
[  OK  ] Started Dispatch Password …ts to Console Directory Watch.
[  OK  ] Reached target Local Encrypted Volumes.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Started CUPS Scheduler.
[  OK  ] Started Daily Cleanup of Temporary Directories.
[  OK  ] Started Ubuntu Advantage Timer for running repeated jobs.
[  OK  ] Reached target Paths.
[  OK  ] Reached target System Time Set.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Trigger anacron every hour.
[  OK  ] Started Daily apt download activities.
[  OK  ] Started Daily apt upgrade and clean activities.
[  OK  ] Started Periodic ext4 Onli…ata Check for All Filesystems.
[  OK  ] Started Discard unused blocks once a week.
[  OK  ] Started Daily rotation of log files.
[  OK  ] Started Daily man-db regeneration.
[  OK  ] Reached target Timers.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on CUPS Scheduler.
[  OK  ] Listening on D-Bus System Message Bus Socket.
         Starting Socket activation for snappy daemon.
[  OK  ] Listening on Socket activation for snappy daemon.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
         Starting Accounts Service...
         Starting Adbd for linux...
[  OK  ] Started Run anacron jobs.
         Starting LSB: automatic crash report generation...
         Starting enable ASYNC for Debian Display...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Bluetooth management mechanism...
[  OK  ] Started D-Bus System Message Bus.
         Starting Network Manager...
[  OK  ] Started Save initial kernel messages after boot.
         Starting Remove Stale Onli…t4 Metadata Check Snapshots...
[  OK  ] Started start firefly-fan service.
[  OK  ] Started Set the CPU Frequency Scaling governor.
         Starting Authorization Manager...
         Starting Restore /etc/reso… the ppp link was shut down...
         Starting Resize root files…to fit available disk space...
         Starting rkisp 3A engine...
[  OK  ] Started start rknn_server service.
         Starting System Logging Service...
[  OK  ] Reached target Login Prompts (Pre).
         Starting Snap Daemon...
         Starting Login Service...
         Starting Disk Manager...
         Starting WPA supplicant...
[  OK  ] Started Network Name Resolution.
[  OK  ] Finished Restore /etc/reso…re the ppp link was shut down.
[  OK  ] Started rkisp 3A engine.
[  OK  ] Found device /dev/ttyFIQ0.
[  OK  ] Reached target Host and Network Name Lookups.
         Starting Save/Restore Sound Card State...
[  OK  ] Finished Remove Stale Onli…ext4 Metadata Check Snapshots.
[  OK  ] Listening on Load/Save RF …itch Status /dev/rfkill Watch.
[  OK  ] Started enable ASYNC for Debian Display.
[  OK  ] Started System Logging Service.
[  OK  ] Started LSB: automatic crash report generation.
[  OK  ] Finished Save/Restore Sound Card State.
[  OK  ] Reached target Sound Card.
[  OK  ] Finished Resize root files…m to fit available disk space.
[  OK  ] Started WPA supplicant.
[  OK  ] Started Accounts Service.
[  OK  ] Started Login Service.
[  OK  ] Started Avahi mDNS/DNS-SD Stack.
[  OK  ] Started Authorization Manager.
         Starting Modem Manager...
         Starting Setup rockchip platform environment...
         Starting Hostname Service...
[  OK  ] Started Hostname Service.
[  OK  ] Started Disk Manager.
         Starting Network Manager Script Dispatcher Service...
[  OK  ] Started Network Manager Script Dispatcher Service.
[  OK  ] Started Network Manager.
[  OK  ] Started Modem Manager.
[  OK  ] Reached target Network.
         Starting Net-Smp-Affinity...
         Starting OpenVPN service...
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
[  OK  ] Started Net-Smp-Affinity.
[  OK  ] Finished OpenVPN service.
[  OK  ] Finished Permit User Sessions.
         Starting GNOME Display Manager...
         Starting Hold until boot process finishes up...
[  OK  ] Finished Hold until boot process finishes up.
[  OK  ] Finished Setup rockchip platform environment.
[FAILED] Failed to start Adbd for linux.
See 'systemctl status adbd.service' for details.
[  OK  ] Started Setup rockchip platform environment.
[  OK  ] Started Serial Getty on ttyFIQ0.
[  OK  ] Reached target Login Prompts.
         Starting Set console scheme...
[  OK  ] Started Snap Daemon.
         Starting Wait until snapd is fully seeded...
[  OK  ] Finished Set console scheme.
[  OK  ] Created slice system-getty.slice.
[  OK  ] Started OpenBSD Secure Shell server.
[    8.154926] sd 0:0:0:0: [sda] No Caching mode page found
[    8.154960] sd 0:0:0:0: [sda] Assuming drive cache: write through
[  OK  ] Started GNOME Display Manager.
         Starting Time & Date Service...
[  OK  ] Started Time & Date Service.
[  OK  ] Created slice User Slice of UID 1000.
         Starting User Runtime Directory /run/user/1000...
[  OK  ] Started Bluetooth management mechanism.
[  OK  ] Finished User Runtime Directory /run/user/1000.
         Starting User Manager for UID 1000...
[  OK  ] Started User Manager for UID 1000.
[  OK  ] Started Session 1 of user firefly.
         Starting Bluetooth service...
[  OK  ] Started Bluetooth service.
         Starting Daemon for power management...
[  OK  ] Started Daemon for power management.

Ubuntu 20.04.5 LTS firefly ttyFIQ0

firefly login: root (automatic login)

_____ _           __ _
|  ___(_)_ __ ___ / _| |_   _
| |_  | | '__/ _ \ |_| | | | |
|  _| | | | |  __/  _| | |_| |
|_|   |_|_|  \___|_| |_|\__, |
                        |___/
Welcome to Ubuntu 20.04.5 LTS (GNU/Linux 5.10.110 aarch64)

* Documentation:  http://wiki.t-firefly.com
* Management:     http://www.t-firefly.com

System information as of Mon Jun 28 09:40:35 UTC 2021

System load:   0.23 0.05 0.02   Up time:       0 min
Memory usage:  4 % of 7409MB    IP:
Usage of /:    1% of 51G


The programs included with the Ubuntu system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.

Ubuntu comes with ABSOLUTELY NO WARRANTY, to the extent permitted by
applicable law.

root@firefly:~# ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether fa:98:db:46:3f:69  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 74

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 356  bytes 30094 (30.0 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 356  bytes 30094 (30.0 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@firefly:~# ifconfig -a
dummy0: flags=130<BROADCAST,NOARP>  mtu 1500
        ether d6:8b:e2:6e:06:93  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether fa:98:db:46:3f:69  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 74

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 404  bytes 34462 (34.4 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 404  bytes 34462 (34.4 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

usb1: flags=4098<BROADCAST,MULTICAST>  mtu 1500
        ether 16:f5:20:f7:02:e0  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@firefly:~# ifconfig usb1 192.168.1.6 netmask 255.255.255.0 up
root@firefly:~# ping 192.168.1.3 -I usb1
PING 192.168.1.3 (192.168.1.3) from 192.168.1.6 usb1: 56(84) bytes of data.
From 192.168.1.6 icmp_seq=1 Destination Host Unreachable
^C
--- 192.168.1.3 ping statistics ---
6 packets transmitted, 0 received, +1 errors, 100% packet loss, time 5067ms
pipe 4
root@firefly:~# ifconfig
eth0: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether fa:98:db:46:3f:69  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
        device interrupt 74

lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
        inet 127.0.0.1  netmask 255.0.0.0
        inet6 ::1  prefixlen 128  scopeid 0x10<host>
        loop  txqueuelen 1000  (Local Loopback)
        RX packets 1063  bytes 89054 (89.0 KB)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 1063  bytes 89054 (89.0 KB)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

usb1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
        inet 192.168.1.6  netmask 255.255.255.0  broadcast 192.168.1.255
        inet6 fe80::14f5:20ff:fef7:2e0  prefixlen 64  scopeid 0x20<link>
        ether 16:f5:20:f7:02:e0  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

root@firefly:~#


方式2.png (28.26 KB, 下载次数: 148)

方式2.png
回复

使用道具 举报

94

积分

0

威望

0

贡献

技术小白

积分
94
发表于 2023-1-16 14:56:35        只看该作者  7#
zhangzhenzhao 发表于 2023-1-12 15:14
可以复现问题抓份开机log,上层和内核的都提供看看

还有这个应该也要添加吧

我这边尝试了两种调试方法,在3588端可以看到usb网卡,通过方式1在电脑端检测不到usb设备,而使用方式2在电脑端能够检测到usb设备,但是配置ip后网络不通,且方式2开机会显示usb2phy无法创建等错误,求帮助。

图片2.png (6.62 KB, 下载次数: 149)

图片2.png

图片3.png (9.46 KB, 下载次数: 152)

图片3.png
回复

使用道具 举报

1万

积分

14

威望

13

贡献

管理员

Rank: 9Rank: 9Rank: 9

积分
11139

优秀版主

发表于 2023-1-29 10:58:42        只看该作者  8#
请先单独使能一个typec ,调通 rndis 功能。

根据以往调试经验,USB Gadget 驱动只支持一个  usb device 设备,如果你是通过 /etc/init.d/adbd.sh 来配置 rndis 功能,脚本会默认绑定 /sys/kernel/config/usb_gadget/rockchip/UDC 设备为 typec0,你可以追踪一下脚本。

由于  USB Gadget 框架的特性,“typec0 全功能 ,typec1 device 虚拟 rndis”,这个可能做不到,typec0  otg 无法和 typec1 同时切换成 device 模式
回复

使用道具 举报

94

积分

0

威望

0

贡献

技术小白

积分
94
发表于 2023-1-30 09:55:21        只看该作者  9#
板蓝根 发表于 2023-1-29 10:58
请先单独使能一个typec ,调通 rndis 功能。

根据以往调试经验,USB Gadget 驱动只支持一个  usb device ...

您好,我这边调试typec0虚拟rndis功能一切正常,但是把typec0禁掉后,typec1虚拟的rndis只能在windows下可以ping通,ubuntu下网络不通,sdk中默认是将typec1配置为host模式的,请教一下该如何配置typec1。

图片1.png (42.68 KB, 下载次数: 151)

图片1.png
回复

使用道具 举报

92

积分

0

威望

0

贡献

技术小白

积分
92
发表于 2023-5-9 19:21:41        只看该作者  10#
正在调dwc3_1的otg,参考下楼主的~
回复

使用道具 举报

返回列表
12
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表