Firefly开源社区

[技术讨论] 不能起动

85

积分

0

威望

0

贡献

技术小白

积分
85
发表于 2020-7-27 15:53:32     
本帖最后由 keithc 于 2020-7-27 15:54 编辑

自已打版,并用 ROC-RK3308-CC_Buildroot_normal_20181114.img 镜像, 有以下的 讯息, 之後一直就在这里,请帮忙…

  1. pwm-regulator(vdd-core): init 1044000 uV
  2. regulator(vdd-core) init 1044000 uV
  3. MMC:   dwmmc@ff490000: 0
  4. Using default environment

  5. In:    serial@ff0c0000
  6. Out:   serial@ff0c0000
  7. Err:   serial@ff0c0000
  8. Model: Rockchip RK3308 EVB
  9. MMC Device 1 not found
  10. no mmc device at slot 1
  11. switch to partitions #0, OK
  12. mmc0(part 0) is current device
  13. enter Recovery mode!
  14. CLK:
  15. apll 816000 KHz
  16. dpll 1300000 KHz
  17. vpll0 1179647 KHz
  18. vpll1 903167 KHz
  19. aclk_bus 185714 KHz
  20. hclk_bus 100000 KHz
  21. pclk_bus 100000 KHz
  22. aclk_peri 185714 KHz
  23. hclk_peri 100000 KHz
  24. pclk_peri 100000 KHz
  25. hclk_audio 98303 KHz
  26. pclk_audio 98303 KHz
  27. Net:   Net Initialization Skipped
  28. No ethernet found.
  29. Hit any key to stop autoboot:  0
  30. ANDROID: reboot reason: "recovery"
  31. FDT load addr 0x10f00000 size 253 KiB
  32. Booting kernel at 0x4080000 with fdt at 4acb000...


  33. ## Booting Android Image at 0x04080000 ...
  34. Kernel load addr 0x02080000 size 4635 KiB
  35. RAM disk load addr 0x11000000 size 5900 KiB
  36. ## Flattened Device Tree blob at 04acb000
  37.    Booting using the fdt blob at 0x4acb000
  38.    Uncompressing Kernel Image ... OK
  39.    Loading Ramdisk to 0ef51000, end 0f513eff ... OK
  40.    Loading Device Tree to 000000000ef3d000, end 000000000ef50205 ... OK
  41. Adding bank: start=0x00200000, size=0x0fe00000

  42. Starting kernel ...


  43. [    0.000000] Booting Linux on physical CPU 0x0
  44. [    0.000000] Linux version 4.4.143 (guanzl@mid-server) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Tue Nov 13 10:30:07 CST 2018
  45. [    0.000000] Boot CPU: AArch64 Processor [410fd042]
  46. [    0.000000] earlycon: Early serial console at MMIO32 0xff0c0000 (options '')
  47. [    0.000000] bootconsole [uart0] enabled
  48. [    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
  49. [    0.000000] psci: probing for conduit method from DT.
  50. [    0.000000] psci: PSCIv1.0 detected in firmware.
  51. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  52. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  53. [    0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc00ff54000 s40088 r8192 d29544 u77824
  54. [    0.000000] Detected VIPT I-cache on CPU0
  55. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64008
  56. [    0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc androidboot.slot_suffix= androidboot.serialno=c3d9b8674f4b94f6  rootwait earlycon=uart8250,mmio32,0xff0c0000 swiotlb=1 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=squashfs snd_aloop.index=7
  57. [    0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
  58. [    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
  59. [    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
  60. [    0.000000] software IO TLB [mem 0x0feb4000-0x0fef4000] (0MB) mapped at [ffffffc00feb4000-ffffffc00fef3fff]
  61. [    0.000000] Memory: 239396K/260096K available (5758K kernel code, 418K rwdata, 2112K rodata, 384K init, 502K bss, 20700K reserved, 0K cma-reserved)
  62. [    0.000000] Virtual kernel memory layout:
  63. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  64. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
  65. [    0.000000]       .init : 0xffffff8008840000 - 0xffffff80088a0000   (   384 KB)
  66. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008620000   (  5760 KB)
  67. [    0.000000]     .rodata : 0xffffff8008620000 - 0xffffff8008840000   (  2176 KB)
  68. [    0.000000]       .data : 0xffffff80088a0000 - 0xffffff8008908808   (   419 KB)
  69. [    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
  70. [    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
  71. [    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc010000000   (   254 MB)
  72. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  73. [    0.000000] Preemptible hierarchical RCU implementation.
  74. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  75. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  76. [    0.000000] GIC: Using split EOI/Deactivate mode
  77. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  78. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  79. [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  80. [    0.001756] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  81. [    0.002706] pid_max: default: 32768 minimum: 301
  82. [    0.003258] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
  83. [    0.003860] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
  84. [    0.005289] sched-energy: CPU device node has no sched-energy-costs
  85. [    0.005907] Invalid sched_group_energy for CPU0
  86. [    0.006326] CPU0: update cpu_capacity 1024
  87. [    0.006750] ASID allocator initialised with 65536 entries
  88. [    0.016479] Detected VIPT I-cache on CPU1
  89. [    0.016534] Invalid sched_group_energy for CPU1
  90. [    0.016540] CPU1: update cpu_capacity 1024
  91. [    0.016544] CPU1: Booted secondary processor [410fd042]
  92. [    0.019500] Detected VIPT I-cache on CPU2
  93. [    0.019538] Invalid sched_group_energy for CPU2
  94. [    0.019542] CPU2: update cpu_capacity 1024
  95. [    0.019546] CPU2: Booted secondary processor [410fd042]
  96. [    0.022542] Detected VIPT I-cache on CPU3
  97. [    0.022577] Invalid sched_group_energy for CPU3
  98. [    0.022582] CPU3: update cpu_capacity 1024
  99. [    0.022586] CPU3: Booted secondary processor [410fd042]
  100. [    0.022654] Brought up 4 CPUs
  101. [    0.027858] SMP: Total of 4 processors activated.
  102. [    0.028297] CPU: All CPU(s) started at EL2
  103. [    0.028814] Invalid sched_group_energy for CPU3
  104. [    0.029236] Invalid sched_group_energy for Cluster3
  105. [    0.029698] Invalid sched_group_energy for CPU2
  106. [    0.030116] Invalid sched_group_energy for Cluster2
  107. [    0.030564] Invalid sched_group_energy for CPU1
  108. [    0.030991] Invalid sched_group_energy for Cluster1
  109. [    0.031440] Invalid sched_group_energy for CPU0
  110. [    0.031856] Invalid sched_group_energy for Cluster0
  111. [    0.032821] devtmpfs: initialized
  112. [    0.050982] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  113. [    0.051920] futex hash table entries: 1024 (order: 4, 65536 bytes)
  114. [    0.052884] pinctrl core: initialized pinctrl subsystem
  115. [    0.054474] NET: Registered protocol family 16
  116. [    0.059478] cpuidle: using governor menu
  117. [    0.059870] Registered FIQ tty driver
  118. [    0.060552] vdso: 2 pages (1 code @ ffffff8008626000, 1 data @ ffffff80088a4000)
  119. [    0.061260] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  120. [    0.062092] DMA: preallocated 256 KiB pool for atomic allocations
  121. [    0.065561] console [pstore-1] enabled
  122. [    0.065913] pstore: Registered ramoops as persistent store backend
  123. [    0.066498] ramoops: attached 0xf0000@0x110000, ecc: 0/0
  124. [    0.084998] fiq debugger fiq mode enabled
  125. [[    0.085747] console [ttyFIQ0] enabled
  126.     0.085747] console [ttyFIQ0] enabled
  127. [    0.086444] bootconsole [uart0] disabled
  128. [    0.086444] bootconsole [uart0] disabled
  129. [    0.087057] Registered fiq debugger ttyFIQ0
  130. WARNING: suspend_mode_handler: Not support call: 0x4
  131. [    0.101845] vcc_1v8: regulator get failed, ret=-517
  132. [    0.102691] vcc_1v8_codec: regulator get failed, ret=-517
  133. [    0.103481] vcc_1v8: supplied by vcc_io
  134. [    0.103571] vcc_1v8_codec: supplied by vcc_io
  135. [    0.105977] SCSI subsystem initialized
  136. [    0.106276] usbcore: registered new interface driver usbfs
  137. [    0.106353] usbcore: registered new interface driver hub
  138. [    0.106480] usbcore: registered new device driver usb
  139. [    0.106622] pps_core: LinuxPPS API ver. 1 registered
  140. [    0.106636] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  141. [    0.106672] PTP clock support registered
  142. [    0.107866] Advanced Linux Sound Architecture Driver Initialized.
  143. [    0.108534] Bluetooth: Core ver 2.21
  144. [    0.108596] NET: Registered protocol family 31
  145. [    0.108609] Bluetooth: HCI device and connection manager initialized
  146. [    0.108630] Bluetooth: HCI socket layer initialized
  147. [    0.108646] Bluetooth: L2CAP socket layer initialized
  148. [    0.108686] Bluetooth: SCO socket layer initialized
  149. [    0.109819] rockchip-cpuinfo cpuinfo: Serial         : a32b06ea995d4011
  150. [    0.110487] clocksource: Switched to clocksource arch_sys_counter
  151. [    0.112960] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  152. [    0.113255] NET: Registered protocol family 2
  153. [    0.113957] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  154. [    0.114018] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
  155. [    0.114079] TCP: Hash tables configured (established 2048 bind 2048)
  156. [    0.114161] UDP hash table entries: 256 (order: 1, 8192 bytes)
  157. [    0.114192] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  158. [    0.114411] NET: Registered protocol family 1
  159. [    0.114738] Unpacking initramfs...
  160. [    0.558239] Freeing initrd memory: 5896K
  161. [    0.558926] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  162. [    0.570326] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  163. [    0.570643] ntfs: driver 2.1.32 [Flags: R/W].
  164. [    0.573977] io scheduler noop registered (default)
  165. [    0.575124] phy phy-ff008000.syscon:usb2-phy@100.0: Failed to get VBUS supply regulator
  166. [    0.579445] dma-pl330 ff2c0000.dma-controller: Loaded driver for PL330 DMAC-241330
  167. [    0.579504] dma-pl330 ff2c0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  168. [    0.581926] dma-pl330 ff2d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  169. [    0.581964] dma-pl330 ff2d0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  170. [    0.582314] rockchip-pvtm ff000000.grf:pmu-pvtm: failed to get rst 0 pmu
  171. [    0.582462] rockchip-pvtm ff00c000.syscon:pvtm: failed to get rst 0 core
  172. [    0.584016] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  173. [    0.586313] ff0e0000.serial: ttyS4 at MMIO 0xff0e0000 (irq = 12, base_baud = 6770833) is a 16550A
  174. [    0.588167] [drm] Initialized drm 1.1.0 20060810
  175. [    0.588334] random: nonblocking pool is initialized
  176. [    0.591082] Unable to detect cache hierarchy for CPU 0
  177. [    0.598094] loop: module loaded
  178. [    0.598463] SCSI Media Changer driver v0.25
  179. [    0.600412] rk_gmac-dwmac ff4e0000.ethernet: clock input or output? (input).
  180. [    0.600459] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: tx_delay.
  181. [    0.600504] rk_gmac-dwmac ff4e0000.ethernet: set tx_delay to 0x30
  182. [    0.600527] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: rx_delay.
  183. [    0.600543] rk_gmac-dwmac ff4e0000.ethernet: set rx_delay to 0x10
  184. [    0.600566] rk_gmac-dwmac ff4e0000.ethernet: integrated PHY? (no).
  185. [    0.600807] rk_gmac-dwmac ff4e0000.ethernet: clock input from PHY
  186. [    0.605841] rk_gmac-dwmac ff4e0000.ethernet: init for RMII
  187. [    0.605980] stmmac - user ID: 0x10, Synopsys ID: 0x35
  188. [    0.605996]  Ring mode enabled
  189. [    0.606008]  DMA HW capability register supported
  190. [    0.606016]  Normal descriptors
  191. [    0.606028]  RX Checksum Offload Engine supported (type 2)
  192. [    0.606038]  TX Checksum insertion supported
  193. [    0.606048]  Wake-Up On Lan supported
  194. [    0.606108]  Enable RX Mitigation via HW Watchdog Timer
  195. [    0.689773] libphy: stmmac: probed
  196. [    0.689815] eth%d: PHY ID 0000ffff at 0 IRQ POLL (stmmac-0:00) active
  197. [    0.689832] eth%d: PHY ID 0000ffff at 1 IRQ POLL (stmmac-0:01)
  198. [    0.689845] eth%d: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02)
  199. [    0.689858] eth%d: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03)
  200. [    0.689871] eth%d: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04)
  201. [    0.689884] eth%d: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05)
  202. [    0.689897] eth%d: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06)
  203. [    0.689910] eth%d: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07)
  204. [    0.689923] eth%d: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08)
  205. [    0.689937] eth%d: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09)
  206. [    0.689950] eth%d: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a)
  207. [    0.689963] eth%d: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b)
  208. [    0.689976] eth%d: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c)
  209. [    0.689989] eth%d: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d)
  210. [    0.690002] eth%d: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e)
  211. [    0.690015] eth%d: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f)
  212. [    0.690029] eth%d: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10)
  213. [    0.690047] eth%d: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11)
  214. [    0.690060] eth%d: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12)
  215. [    0.690073] eth%d: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13)
  216. [    0.690086] eth%d: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14)
  217. [    0.690099] eth%d: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15)
  218. [    0.690113] eth%d: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16)
  219. [    0.690126] eth%d: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17)
  220. [    0.690139] eth%d: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18)
  221. [    0.690152] eth%d: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19)
  222. [    0.690165] eth%d: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a)
  223. [    0.690178] eth%d: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b)
  224. [    0.690191] eth%d: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c)
  225. [    0.690204] eth%d: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d)
  226. [    0.690216] eth%d: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e)
  227. [    0.690229] eth%d: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f)
  228. [    0.691434] Rockchip WiFi SYS interface (V1.00) ...
  229. [    0.691940] ff400000.usb supply vusb_d not found, using dummy regulator
  230. [    0.692033] ff400000.usb supply vusb_a not found, using dummy regulator
  231. [    0.804558] dwc2 ff400000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  232. [    0.805091] dwc2 ff400000.usb: DWC OTG Controller
  233. [    0.805142] dwc2 ff400000.usb: new USB bus registered, assigned bus number 1
  234. [    0.805193] dwc2 ff400000.usb: irq 22, io mem 0xff400000
  235. [    0.806285] hub 1-0:1.0: USB hub found
  236. [    0.806355] hub 1-0:1.0: 1 port detected
  237. [    0.807279] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  238. [    0.807313] ehci-platform: EHCI generic platform driver
  239. [    0.811142] ehci-platform ff440000.usb: EHCI Host Controller
  240. [    0.811194] ehci-platform ff440000.usb: new USB bus registered, assigned bus number 2
  241. [    0.811341] ehci-platform ff440000.usb: irq 23, io mem 0xff440000
  242. [    0.816518] ehci-platform ff440000.usb: USB 2.0 started, EHCI 1.00
  243. [    0.817557] hub 2-0:1.0: USB hub found
  244. [    0.817615] hub 2-0:1.0: 1 port detected
  245. [    0.818195] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  246. [    0.818246] ohci-platform: OHCI generic platform driver
  247. [    0.818667] ohci-platform ff450000.usb: Generic Platform OHCI controller
  248. [    0.818713] ohci-platform ff450000.usb: new USB bus registered, assigned bus number 3
  249. [    0.818894] ohci-platform ff450000.usb: irq 24, io mem 0xff450000
  250. [    0.874367] hub 3-0:1.0: USB hub found
  251. [    0.874424] hub 3-0:1.0: 1 port detected
  252. [    0.875090] usbcore: registered new interface driver uas
  253. [    0.875239] usbcore: registered new interface driver usb-storage
  254. [    0.875300] usbcore: registered new interface driver ums-alauda
  255. [    0.875366] usbcore: registered new interface driver ums-cypress
  256. [    0.875429] usbcore: registered new interface driver ums-datafab
  257. [    0.875516] usbcore: registered new interface driver ums_eneub6250
  258. [    0.875584] usbcore: registered new interface driver ums-freecom
  259. [    0.875650] usbcore: registered new interface driver ums-isd200
  260. [    0.875708] usbcore: registered new interface driver ums-jumpshot
  261. [    0.875769] usbcore: registered new interface driver ums-karma
  262. [    0.875838] usbcore: registered new interface driver ums-onetouch
  263. [    0.875900] usbcore: registered new interface driver ums-sddr09
  264. [    0.875961] usbcore: registered new interface driver ums-sddr55
  265. [    0.876027] usbcore: registered new interface driver ums-usbat
  266. [    0.876773] i2c /dev entries driver
  267. [    0.877913] rk3x-i2c ff050000.i2c: Initialized RK3xxx I2C bus at ffffff80089be000
  268. [    0.880695] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647
  269. [    0.880941] rockchip-thermal ff1f0000.tsadc: tsadc is probed successfully!
  270. [    0.881581] Bluetooth: HCI UART driver ver 2.3
  271. [    0.881607] Bluetooth: HCI UART protocol H4 registered
  272. [    0.881618] Bluetooth: HCI UART protocol LL registered
  273. [    0.881856] cpu cpu0: leakage=13
  274. [    0.882115] cpu cpu0: Failed to get pvtm
  275. [    0.884753] Synopsys Designware Multimedia Card Interface Driver
  276. [    0.886446] dwmmc_rockchip ff480000.dwmmc: num-slots property not found, assuming 1 slot is available
  277. [    0.886626] dwmmc_rockchip ff480000.dwmmc: IDMAC supports 32-bit address mode.
  278. [    0.886678] dwmmc_rockchip ff480000.dwmmc: Using internal DMA controller.
  279. [    0.886702] dwmmc_rockchip ff480000.dwmmc: Version ID is 270a
  280. [    0.886779] dwmmc_rockchip ff480000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  281. [    0.887590] rockchip-iodomain ff000000.grf:io-domains: Setting to 3300000 done
  282. [    0.887628] rockchip-iodomain ff000000.grf:io-domains: Setting to 3300000 done
  283. [    0.898582] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  284. [    0.909659] rockchip-iodomain ff000000.grf:io-domains: Setting to 3300000 done
  285. [    0.909694] rockchip-iodomain ff000000.grf:io-domains: Setting to 3300000 done
  286. [    0.909707] set vqmmc to 3.3v, ret=0
  287. [    0.910223] dwmmc_rockchip ff480000.dwmmc: 1 slots initialized
  288. [    0.910459] dwmmc_rockchip ff490000.dwmmc: No default pinctrl state
  289. [    0.910518] dwmmc_rockchip ff490000.dwmmc: No off pinctrl state
  290. [    0.910646] dwmmc_rockchip ff490000.dwmmc: IDMAC supports 32-bit address mode.
  291. [    0.910697] dwmmc_rockchip ff490000.dwmmc: Using internal DMA controller.
  292. [    0.910722] dwmmc_rockchip ff490000.dwmmc: Version ID is 270a
  293. [    0.910798] dwmmc_rockchip ff490000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
  294. [    0.910877] dwmmc_rockchip ff490000.dwmmc: No vmmc regulator found
  295. [    0.910894] dwmmc_rockchip ff490000.dwmmc: No vqmmc regulator found
  296. [    0.921658] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  297. [    0.932683] dwmmc_rockchip ff490000.dwmmc: 1 slots initialized
  298. [    0.933261] dwmmc_rockchip ff4a0000.dwmmc: No default pinctrl state
  299. [    0.933284] dwmmc_rockchip ff4a0000.dwmmc: No off pinctrl state
  300. [    0.933302] dwmmc_rockchip ff4a0000.dwmmc: num-slots property not found, assuming 1 slot is available
  301. [    0.933398] dwmmc_rockchip ff4a0000.dwmmc: IDMAC supports 32-bit address mode.
  302. [    0.933435] dwmmc_rockchip ff4a0000.dwmmc: Using internal DMA controller.
  303. [    0.933454] dwmmc_rockchip ff4a0000.dwmmc: Version ID is 270a
  304. [    0.933541] dwmmc_rockchip ff4a0000.dwmmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
  305. [    0.933601] dwmmc_rockchip ff4a0000.dwmmc: No vmmc regulator found
  306. [    0.933615] dwmmc_rockchip ff4a0000.dwmmc: No vqmmc regulator found
  307. [    0.933911] dwmmc_rockchip ff4a0000.dwmmc: allocated mmc-pwrseq
  308. [    0.944624] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  309. [    0.955637] dwmmc_rockchip ff4a0000.dwmmc: 1 slots initialized
  310. [    0.957045] is31fl32xx 1-003c: register write to 0x00 failed (error -6),val=0
  311. [    0.968375] mmc1: MAN_BKOPS_EN bit is not set
  312. [    0.971807] mmc_host mmc1: Bus speed (slot 0) = 147456000Hz (slot req 150000000Hz, actual 147456000HZ div = 0)
  313. [    0.980598] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
  314. [    0.988665] phy phy-ff008000.syscon:usb2-phy@100.0: charger = USB_CDP_CHARGER
  315. [    1.017579] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
  316. [    1.057701] is31fl32xx 1-003c: register write to 0x00 failed (error -6),val=0
  317. [    1.058571] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
  318. [    1.158682] is31fl32xx 1-003c: register write to 0x00 failed (error -6),val=0
  319. [    1.259645] is31fl32xx_init_regs, write to shutdown register failed
  320. [    1.259770] is31fl32xx 1-003c: register write to 0x26 failed (error -6),val=1
  321. [    1.348282] dwmmc_rockchip ff490000.dwmmc: Successfully tuned phase to 60
  322. [    1.348437] mmc1: new HS200 MMC card at address 0001
  323. [    1.349900] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
  324. [    1.350688] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
  325. [    1.352602] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 M[    1.359059]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
  326. [    1.360681] is31fl32xx 1-003c: register write to 0x26 failed (error -6),val=1
  327. [    1.461771] is31fl32xx 1-003c: register write to 0x26 failed (error -6),val=1
  328. [    1.563239] usbcore: registered new interface driver usbhid
  329. [    1.563286] usbhid: USB HID core driver
  330. [    1.563585] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node
  331. [    1.563993] rockchip-dmc dmc: Failed to get leakage
  332. [    1.564160] rockchip-dmc dmc: Failed to get pvtm
  333. [    1.564751] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
  334. [    [    1.568660] rknandc_base v1.1 2017-01-11
  335. [    1.569126] rksfc_base v1.1 2016-01-08
  336. [    1.577751] rk3308-acodec ff560000.acodec: Don't need pa-drv gpio
  337. [    1.577808] rk3308-acodec ff560000.acodec: De-pop as much as possible
  338. [    1.578946] 1-001a supply AVDD not found, using dummy regulator
  339. [    1.579092] 1-001a supply DVDD not found, using dummy regulator
  340. [    1.579206] 1-001a supply PVDD_A not found, using dummy regulator
  341. [    1.579318] 1-001a supply PVDD_001a supply PVDD_C not found, using dummy regulator
  342. [    1.5796ror requesting pdn_gpio: -16
  343. [    1.580683] tas571x: probe of 1-001a failed with error -16
  344. [    1.589346] rk-multicodecs bluetooth-sound: card: 0 has not been locked, re-probe again
  345. [    1.589420] rk-multicodecs bluetooth-sound: check_lock_card failed: -517
  346. [    1.589965] rk-multicodecs vad-sound: ASoC: CPU DAI (null) not registered
  347. [    1.591439] NET: Registered protocol family 10
  348. [    1.592852] NET: Registered protocol family 17
  349. [    1.592922] NET: Registered protocol family 15
  350. [    1.593192] Bluetooth: RFCOMM TTY layer initialized
  351. [    1.593217] Bluetooth: RFCOMM socket layer initialized
  352. [    1.593255] Bluetooth: RFCOMM ver 1.11
  353. [    1.593280] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  354. [    1.593297] Bluetooth: HIDP socket layer initialized
  355. [    1.593312] [WLAN_RFKILL]: Enter rfkill_wlan_init
  356. [    1.593868] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  357. [    1.593897] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6236
  358. [    1.593914] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  359. [    1.593923] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  360. [    1.594007] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 0, flags = 1.
  361. [    1.594023] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  362. [    1.594032] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  363. [    1.594044] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  364. [    1.594123] [BT_RFKILL]: Enter rfkill_rk_init
  365. [    1.594594] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 135.
  366. [    1.594635] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 139.
  367. [    1.594685] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 140.
  368. [    1.594697] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
  369. [    1.594766] [BT_RFKILL]: Request irq for bt wakeup host
  370. [    1.594826] [BT_RFKILL]: ** disable irq
  371. [    1.595005] [BT_RFKILL]: bt_default device registered.
  372. [    1.595549] flash vendor_init_thread!
  373. [    1.595576] flash vendor storage:20170308 ret = -1
  374. [    1.596596] vendor storage:20160801 ret = 0
  375. [    1.597968] input: adc-keys as /devices/platform/adc-keys/input/input0
  376. [    1.599212] rk-multicodecs bluetooth-sound: card: 0 has not been locked, re-probe again
  377. [    1.599245] rk-multicodecs bluetooth-sound: check_lock_card failed: -517
  378. [    1.671208] rk-multicodecs vad-sound: multicodec <-> pdm-i2s-dais mapping ok
  379. [    1.674539] rk-multicodecs bluetooth-sound: dummy_codec <-> ff350000.i2s mapping ok
  380. [    1.676041] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.2 (r)
  381. [    1.676070] ======== dhd_wlan_init_plat_data ========
  382. [    1.676081] dhd_wlan_init_gpio: GPIO(WL_REG_ON) = -1
  383. [    1.676090] dhd_wlan_init_gpio: GPIO(WL_HOST_WAKE) = -1
  384. [    1.676101] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
  385. [    1.676114] dhd_wlan_init_gpio: host_oob_irq: 36
  386. [    1.676123] dhd_wlan_init_gpio: host_oob_irq_flags=0x418
  387. [    1.676132] dhd_wifi_platform_load: Enter
  388. [    1.676163] Power-up adapter 'DHD generic adapter'
  389. [    1.676219] wifi_platform_set_power = 1
  390. [    1.676228] ======== PULL WL_REG_ON(-1) HIGH! ========
  391. [    1.676238] [WLAN_RFKILL]: rockchip_wifi_power: 1
  392. [    1.676248] [WLAN_RFKILL]: wifi turn on power. -1
  393. [    1.676311] hctosys: unable to open rtc device (rtc0)
  394. [    1.688011] vcc_sd: disabling
  395. [    1.688066] vccio_sd: disabling
  396. u▒   1.688696]
  397. pwm-regulator(vdd-core): init 1044000 uV
  398. regulator(vdd-core) init 1044000 uV
  399. MMC:   dwmmc@ff490000: 0
  400. Using default environment

  401. In:    serial@ff0c0000
  402. Out:   serial@ff0c0000
  403. Err:   serial@ff0c0000
  404. Model: Rockchip RK3308 EVB
  405. MMC Device 1 not found
  406. no mmc device at slot 1
  407. switch to partitions #0, OK
  408. mmc0(part 0) is current device
  409. enter Recovery mode!
  410. CLK:
  411. apll 816000 KHz
  412. dpll 1300000 KHz
  413. vpll0 1179647 KHz
  414. vpll1 903167 KHz
  415. aclk_bus 185714 KHz
  416. hclk_bus 100000 KHz
  417. pclk_bus 100000 KHz
  418. aclk_peri 185714 KHz
  419. hclk_peri 100000 KHz
  420. pclk_peri 100000 KHz
  421. hclk_audio 98303 KHz
  422. pclk_audio 98303 KHz
  423. Net:   Net Initialization Skipped
  424. No ethernet found.
  425. Hit any key to stop autoboot:  0
  426. ANDROID: reboot reason: "recovery"
  427. FDT load addr 0x10f00000 size 253 KiB
  428. Booting kernel at 0x4080000 with fdt at 4acb000...


  429. ## Booting Android Image at 0x04080000 ...
  430. Kernel load addr 0x02080000 size 4635 KiB
  431. RAM disk load addr 0x11000000 size 5900 KiB
  432. ## Flattened Device Tree blob at 04acb000
  433.    Booting using the fdt blob at 0x4acb000
  434.    Uncompressing Kernel Image ... OK
  435.    Loading Ramdisk to 0ef51000, end 0f513eff ... OK
  436.    Loading Device Tree to 000000000ef3d000, end 000000000ef50205 ... OK
  437. Adding bank: start=0x00200000, size=0x0fe00000

  438. Starting kernel ...


  439. [    0.000000] Booting Linux on physical CPU 0x0
  440. [    0.000000] Linux version 4.4.143 (guanzl@mid-server) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Tue Nov 13 10:30:07 CST 2018
  441. [    0.000000] Boot CPU: AArch64 Processor [410fd042]
  442. [    0.000000] earlycon: Early serial console at MMIO32 0xff0c0000 (options '')
  443. [    0.000000] bootconsole [uart0] enabled
  444. [    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
  445. [    0.000000] psci: probing for conduit method from DT.
  446. [    0.000000] psci: PSCIv1.0 detected in firmware.
  447. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  448. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  449. [    0.000000] PERCPU: Embedded 19 pages/cpu @ffffffc00ff54000 s40088 r8192 d29544 u77824
  450. [    0.000000] Detected VIPT I-cache on CPU0
  451. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64008
  452. [    0.000000] Kernel command line: storagemedia=emmc androidboot.mode=emmc androidboot.slot_suffix= androidboot.serialno=c3d9b8674f4b94f6  rootwait earlycon=uart8250,mmio32,0xff0c0000 swiotlb=1 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=squashfs snd_aloop.index=7
  453. [    0.000000] PID hash table entries: 1024 (order: 1, 8192 bytes)
  454. [    0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes)
  455. [    0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
  456. [    0.000000] software IO TLB [mem 0x0feb4000-0x0fef4000] (0MB) mapped at [ffffffc00feb4000-ffffffc00fef3fff]
  457. [    0.000000] Memory: 239396K/260096K available (5758K kernel code, 418K rwdata, 2112K rodata, 384K init, 502K bss, 20700K reserved, 0K cma-reserved)
  458. [    0.000000] Virtual kernel memory layout:
  459. [    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  460. [    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
  461. [    0.000000]       .init : 0xffffff8008840000 - 0xffffff80088a0000   (   384 KB)
  462. [    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008620000   (  5760 KB)
  463. [    0.000000]     .rodata : 0xffffff8008620000 - 0xffffff8008840000   (  2176 KB)
  464. [    0.000000]       .data : 0xffffff80088a0000 - 0xffffff8008908808   (   419 KB)
  465. [    0.000000]     fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (  4108 KB)
  466. [    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
  467. [    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc010000000   (   254 MB)
  468. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  469. [    0.000000] Preemptible hierarchical RCU implementation.
  470. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  471. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  472. [    0.000000] GIC: Using split EOI/Deactivate mode
  473. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  474. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  475. [    0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  476. [    0.001746] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
  477. [    0.002696] pid_max: default: 32768 minimum: 301
  478. [    0.003247] Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
  479. [    0.003849] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes)
  480. [    0.005268] sched-energy: CPU device node has no sched-energy-costs
  481. [    0.005885] Invalid sched_group_energy for CPU0
  482. [    0.006304] CPU0: update cpu_capacity 1024
  483. [    0.006727] ASID allocator initialised with 65536 entries
  484. [    0.016458] Detected VIPT I-cache on CPU1
  485. [    0.016514] Invalid sched_group_energy for CPU1
  486. [    0.016519] CPU1: update cpu_capacity 1024
  487. [    0.016524] CPU1: Booted secondary processor [410fd042]
  488. [    0.019479] Detected VIPT I-cache on CPU2
  489. [    0.019515] Invalid sched_group_energy for CPU2
  490. [    0.019519] CPU2: update cpu_capacity 1024
  491. [    0.019523] CPU2: Booted secondary processor [410fd042]
  492. [    0.022521] Detected VIPT I-cache on CPU3
  493. [    0.022555] Invalid sched_group_energy for CPU3
  494. [    0.022560] CPU3: update cpu_capacity 1024
  495. [    0.022564] CPU3: Booted secondary processor [410fd042]
  496. [    0.022634] Brought up 4 CPUs
  497. [    0.027837] SMP: Total of 4 processors activated.
  498. [    0.028275] CPU: All CPU(s) started at EL2
  499. [    0.028791] Invalid sched_group_energy for CPU3
  500. [    0.029212] Invalid sched_group_energy for Cluster3
  501. [    0.029675] Invalid sched_group_energy for CPU2
  502. [    0.030093] Invalid sched_group_energy for Cluster2
  503. [    0.030542] Invalid sched_group_energy for CPU1
  504. [    0.030970] Invalid sched_group_energy for Cluster1
  505. [    0.031418] Invalid sched_group_energy for CPU0
  506. [    0.031834] Invalid sched_group_energy for Cluster0
  507. [    0.032801] devtmpfs: initialized
  508. [    0.050950] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  509. [    0.051887] futex hash table entries: 1024 (order: 4, 65536 bytes)
  510. [    0.052847] pinctrl core: initialized pinctrl subsystem
  511. [    0.054429] NET: Registered protocol family 16
  512. [    0.059435] cpuidle: using governor menu
  513. [    0.059830] Registered FIQ tty driver
  514. [    0.060507] vdso: 2 pages (1 code @ ffffff8008626000, 1 data @ ffffff80088a4000)
  515. [    0.061215] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  516. [    0.062048] DMA: preallocated 256 KiB pool for atomic allocations
  517. [    0.065523] console [pstore-1] enabled
  518. [    0.065874] pstore: Registered ramoops as persistent store backend
  519. [    0.066458] ramoops: attached 0xf0000@0x110000, ecc: 0/0
  520. [    0.084953] fiq debugger fiq mode enabled
  521. [[    0.085703] console [ttyFIQ0] enabled
  522.     0.085703] console [ttyFIQ0] enabled
  523. [    0.086398] bootconsole [uart0] disabled
  524. [    0.086398] bootconsole [uart0] disabled
  525. [    0.087011] Registered fiq debugger ttyFIQ0
  526. WARNING: suspend_mode_handler: Not support call: 0x4
  527. [    0.101795] vcc_1v8: regulator get failed, ret=-517
  528. [    0.102648] vcc_1v8_codec: regulator get failed, ret=-517
  529. [    0.103441] vcc_1v8: supplied by vcc_io
  530. [    0.103532] vcc_1v8_codec: supplied by vcc_io
  531. [    0.105927] SCSI subsystem initialized
  532. [    0.106232] usbcore: registered new interface driver usbfs
  533. [    0.106307] usbcore: registered new interface driver hub
  534. [    0.106438] usbcore: registered new device driver usb
  535. [    0.106581] pps_core: LinuxPPS API ver. 1 registered
  536. [    0.106594] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  537. [    0.106630] PTP clock support registered
  538. [    0.107820] Advanced Linux Sound Architecture Driver Initialized.
  539. [    0.108491] Bluetooth: Core ver 2.21
  540. [    0.108553] NET: Registered protocol family 31
  541. [    0.108565] Bluetooth: HCI device and connection manager initialized
  542. [    0.108585] Bluetooth: HCI socket layer initialized
  543. [    0.108601] Bluetooth: L2CAP socket layer initialized
  544. [    0.108641] Bluetooth: SCO socket layer initialized
  545. [    0.109778] rockchip-cpuinfo cpuinfo: Serial         : a32b06ea995d4011
  546. [    0.110453] clocksource: Switched to clocksource arch_sys_counter
  547. [    0.112907] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  548. [    0.113242] NET: Registered protocol family 2
  549. [    0.113946] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
  550. [    0.114006] TCP bind hash table entries: 2048 (order: 3, 32768 bytes)
  551. [    0.114062] TCP: Hash tables configured (established 2048 bind 2048)
  552. [    0.114145] UDP hash table entries: 256 (order: 1, 8192 bytes)
  553. [    0.114181] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  554. [    0.114391] NET: Registered protocol family 1
  555. [    0.114747] Unpacking initramfs...
  556. [    0.558136] Freeing initrd memory: 5896K
  557. [    0.558812] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  558. [    0.570201] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  559. [    0.570512] ntfs: driver 2.1.32 [Flags: R/W].
  560. [    0.573905] io scheduler noop registered (default)
  561. [    0.575083] phy phy-ff008000.syscon:usb2-phy@100.0: Failed to get VBUS supply regulator
  562. [    0.579317] dma-pl330 ff2c0000.dma-controller: Loaded driver for PL330 DMAC-241330
  563. [    0.579366] dma-pl330 ff2c0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  564. [    0.581803] dma-pl330 ff2d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  565. [    0.581843] dma-pl330 ff2d0000.dma-controller:       DBUFF-128x8bytes Num_Cip-pvtm ff000000.grf:pmu-pvtm: failed to get rst 0 pmu
  566. [    0.582349] rockchip-pvtm ff00c000.syscon:pvtm: failed to get rst 0 core
  567. [    0.583854] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  568. [    0.586136] ff0e0000.serial: ttyS4 at MMIO 0xff0e0000 (irq = 12, base_baud = 6770833) is a 16550A
  569. [    0.588004] [drm] Initialized drm 1.1.0 20060810
  570. [    0.588171] random: nonblocking pool is initialized
  571. [    0.590946] Unable to detect cache hierarchy for CPU 0
  572. [    0.598053] loop: module loaded
  573. [    0.598413] SCSI Media Changer driver v0.25
  574. [    0.600315] rk_gmac-dwmac ff4e0000.ethernet: clock input or output? (input).
  575. [    0.600360] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: tx_delay.
  576. [    0.600377] rk_gmac-dwmac ff4e0000.ethernet: set tx_delay to 0x30
  577. [    0.600397] rk_gmac-dwmac ff4e0000.ethernet: Can not read property: rx_delay.
  578. [    0.600414] rk_gmac-dwmac ff4e0000.ethernet: set rx_delay to 0x10
  579. [    0.600437] rk_gmac-dwmac ff4e0000.ethernet: integrated PHY? (no).
  580. [    0.600723] rk_gmac-dwmac ff4e0000.ethernet: clock input from PHY
  581. [    0.605758] rk_gmac-dwmac ff4e0000.ethernet: init for RMII
  582. [    0.605895] stmmac - user ID: 0x10, Synopsys ID: 0x35
  583. [    0.605911]  Ring mode enabled
  584. [    0.605922]  DMA HW capability register supported
  585. [    0.605931]  Normal descriptors
  586. [    0.605942]  RX Checksum Offload Engine supported (type 2)
  587. [    0.605952]  TX Checksum insertion supported
  588. [    0.605963]  Wake-Up On Lan supported
  589. [    0.606028]  Enable RX Mitigation via HW Watchdog Timer
  590. [    0.689535] libphy: stmmac: probed
  591. [    0.689577] eth%d: PHY ID 0000ffff at 0 IRQ POLL (stmmac-0:00) active
  592. [    0.689594] eth%d: PHY ID 0000ffff at 1 IRQ POLL (stmmac-0:01)
  593. [    0.689608] eth%d: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02)
  594. [    0.689621] eth%d: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03)
  595. [    0.689634] eth%d: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04)
  596. [    0.689647] eth%d: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05)
  597. [    0.689660] eth%d: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06)
  598. [    0.689673] eth%d: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07)
  599. [    0.689686] eth%d: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08)
  600. [    0.689699] eth%d: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09)
  601. [    0.689712] eth%d: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a)
  602. [    0.689725] eth%d: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b)
  603. [    0.689739] eth%d: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c)
  604. [    0.689752] eth%d: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d)
  605. [    0.689765] eth%d: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e)
  606. [    0.689778] eth%d: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f)
  607. [    0.689799] eth%d: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10)
  608. [    0.689812] eth%d: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11)
  609. [    0.689826] eth%d: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12)
  610. [    0.689839] eth%d: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13)
  611. [    0.689852] eth%d: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14)
  612. [    0.689865] eth%d: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15)
  613. [    0.689878] eth%d: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16)
  614. [    0.689891] eth%d: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17)
  615. [    0.689904] eth%d: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18)
  616. [    0.689917] eth%d: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19)
  617. [    0.689931] eth%d: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a)
  618. [    0.689943] eth%d: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b)
  619. [    0.689957] eth%d: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c)
  620. [    0.689970] eth%d: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d)
  621. [    0.689982] eth%d: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e)
  622. [    0.689996] eth%d: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f)
  623. [    0.691196] Rockchip WiFi SYS interface (V1.00) ...
  624. [    0.691672] ff400000.usb supply vusb_d not found, using dummy regulator
  625. [    0.691801] ff400000.usb supply vusb_a not found, using dummy regulator
  626. [    0.804524] dwc2 ff400000.usb: EPs: 10, dedicated fifos, 972 entries in SPRAM
  627. [    0.805048] dwc2 ff400000.usb: DWC OTG Controller
  628. [    0.805096] dwc2 ff400000.usb: new USB bus registered, assigned bus number 1
  629. [    0.805144] dwc2 ff400000.usb: irq 22, io mem 0xff400000
  630. [    0.806062] hub 1-0:1.0: USB hub found
  631. [    0.806117] hub 1-0:1.0: 1 port detected
  632. [    1.029939] phy phy-ff008000.syscon:usb2-phy@100.0: charger = USB_SDP_CHARGER
  633. [    1.030190] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  634. [    1.030223] ehci-platform: EHCI generic platform driver
  635. [    1.034078] ehci-platform ff440000.usb: EHCI Host Controller
  636. [    1.034130] ehci-platform ff440000.usb: new USB bus registered, assigned bus number 2
  637. [    1.034274] ehci-platform ff440000.usb: irq 23, io mem 0xff440000
  638. [    1.039487] ehci-platform ff440000.usb: USB 2.0 started, EHCI 1.00
  639. [    1.040373] hub 2-0:1.0: USB hub found
  640. [    1.040426] hub 2-0:1.0: 1 port detected
  641. [    1.041053] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  642. [    1.041102] ohci-platform: OHCI generic platform driver
  643. [    1.041529] ohci-platform ff450000.usb: Generic Platform OHCI contq 24, io mem 0xff450000
  644. [    1.097336] hub 3-0:1.0: USB hub found
  645. [    1.097392] hub 3-0:1.0: 1 port detected
  646. [    1.098047] usbcore: registered new interface driver uas
  647. [    1.098201] usbcore: registered new interface driver usb-storage
  648. [    1.098264] usbcore: registered new interface driver ums-alauda
  649. [    1.098324] usbcore: registered new interface driver ums-cypress
  650. [    1.098391] usbcore: registered new interface driver ums-datafab
  651. [    1.098473] usbcore: registered new interface driver ums_eneub6250
  652. [    1.098537] usbcore: registered new interface driver ums-freecom
  653. [    1.098610] usbcore: registered new interface driver ums-isd200
  654. [    1.098670] usbcore: registered new interface driver ums-jumpshot
  655. [    1.098730] usbcore: registered new interface driver ums-karma
  656. [    1.098798] usbcore: registered new interface driver ums-onetouch
  657. [    1.098861] usbcore: registered new interface driver ums-sddr09
  658. [    1.098922] usbcore: registered new interface driver ums-sddr55
  659. [    1.098988] usbcore: registered new interface driver ums-usbat
  660. [    1.099726] i2c /dev entries driver
  661. [    1.100885] rk3x-i2c ff050000.i2c: Initialized RK3xxx I2C bus at ffffff80089be000
  662. [    1.103735] rk_tsadcv2_temp_to_code: Invalid conversion table: code=4095, temperature=2147483647
  663. [    1.103965] rockchip-thermal ff1f0000.tsadc: tsadc is probed successfully!
  664. [    1.104600] Bluetooth: HCI UART driver ver 2.3
  665. [    1.104626] Bluetooth: HCI UART protocol H4 registered
  666. [    1.104637] Bluetooth: HCI UART protocol LL registered
  667. [    1.104874] cpu cpu0: leakage=13
  668. [    1.105103] cpu cpu0: Failed to get pvtm
  669. [    1.107674] Synopsys Designware Multimedia Card Interface Driver
  670. [    1.109383] dwmmc_rockchip ff480000.dwmmc: num-slots property not found, assuming 1 slot is available
  671. [    1.109564] dwmmc_rockchip ff480000.dwmmc: IDMAC supports 32-bit address mode.
  672. [    1.109609] dwmmc_rockchip ff480000.dwmmc: Using internal DMA controller.
  673. [    1.109639] dwmmc_rockchip ff480000.dwmmc: Version ID is 270a
  674. [    1.109716] dwmmc_rockchip ff480000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  675. [    1.110549] rockchip-iodomain ff000000.grf:io-domains: Setting to 3300000 done
  676. [    1.110589] rockchip-iodomain ff000000.grf:io-domains: Setting to 3300000 done
  677. [    1.121553] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  678. [    1.132626] rockchip-iodomain ff000000.grf:io-domains: Setting to 3300000 done
  679. [    1.132659] rockchip-iodomain ff000000.grf:io-domains: Setting to 3300000 done
  680. [    1.132674] set vqmmc to 3.3v, ret=0
  681. [    1.133187] dwmmc_rockchip ff480000.dwmmc: 1 slots initialized
  682. [    1.133425] dwmmc_rockchip ff490000.dwmmc: No default pinctrl state
  683. [    1.133484] dwmmc_rockchip ff490000.dwmmc: No off pinctrl state
  684. [    1.133613] dwmmc_rockchip ff490000.dwmmc: IDMAC supports 32-bit address mode.
  685. [    1.133662] dwmmc_rockchip ff490000.dwmmc: Using internal DMA controller.
  686. [    1.133684] dwmmc_rockchip ff490000.dwmmc: Version ID is 270a
  687. [    1.133763] dwmmc_rockchip ff490000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
  688. [    1.133842] dwmmc_rockchip ff490000.dwmmc: No vmmc regulator found
  689. [    1.133859] dwmmc_rockchip ff490000.dwmmc: No vqmmc regulator found
  690. [    1.144628] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  691. [    1.155613] dwmmc_rockchip ff490000.dwmmc: 1 slots initialized
  692. [    1.156189] dwmmc_rockchip ff4a0000.dwmmc: No default pinctrl state
  693. [    1.156213] dwmmc_rockchip ff4a0000.dwmmc: No off pinctrl state
  694. [    1.156229] dwmmc_rockchip ff4a0000.dwmmc: num-slots property not found, assuming 1 slot is available
  695. [    1.156325] dwmmc_rockchip ff4a0000.dwmmc: IDMAC supports 32-bit address mode.
  696. [    1.156371] dwmmc_rockchip ff4a0000.dwmmc: Using internal DMA controller.
  697. [    14a0000.dwmmc: DW MMC controller at irq 27,32 bit host data width,256 deep fifo
  698. [    1.156552] dwmmc_rockchip ff4a0000.dwmmc: No vmmc regulator found
  699. [    1.156570] dwmmc_rockchip ff4a0000.dwmmc: No vqmmc regulator found
  700. [    1.156878] dwmmc_rockchip ff4a0000.dwmmc: allocated mmc-pwrseq
  701. [    1.167589] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  702. [    1.178617] dwmmc_rockchip ff4a0000.dwmmc: 1 slots initialized
  703. [    1.180007] is31fl32xx 1-003c: register write to 0x00 failed (error -6),val=0
  704. [    1.191360] mmc1: MAN_BKOPS_EN bit is not set
  705. [    1.194793] mmc_host mmc1: Bus speed (slot 0) = 147456000Hz (slot req 150000000Hz, actual 147456000HZ div = 0)
  706. [    1.203568] mmc_host mmc2: Bus speed (slot 0) = 300000Hz (slot req 300000Hz, actual 300000HZ div = 0)
  707. [    1.240545] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
  708. [    1.280620] is31fl32xx 1-003c: register write to 0x00 failed (error -6),val=0
  709. [    1.281527] mmc_host mmc2: Bus speed (slot 0) = 100000Hz (slot req 100000Hz, actual 100000HZ div = 0)
  710. [    1.381616] is31fl32xx 1-003c: register write to 0x00 failed (error -6),val=0
  711. [    1.482611] is31fl32xx_init_regs, write to shutdown register failed
  712. [    1.482735] is31fl32xx 1-003c: register write to 0x26 failed (error -6),val=1
  713. [    1.571286] dwmmc_rockchip ff490000.dwmmc: Successfully tuned phase to 60
  714. [    1.571443] mmc1: new HS200 MMC card at address 0001
  715. [    1.572991] mmcblk1: mmc1:0001 8GTF4R 7.28 GiB
  716. [    1.574856] mmcblk1boot0: mmc1:0001 8GTF4R partition 1 4.00 MiB
  717. [    1.576776] mmcblk1boot1: mmc1:0001 8GTF4R partition 2 4.00 MiB
  718. [    1.577781] mmcblk1rpmb: mmc1:0001 8GTF4R partition 3 512 KiB
  719. [    1.583644] is31fl32xx 1-003c: register write to 0x26 failed (error -6),val=1
  720. [    1.583826]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
  721. [    1.684743] is31fl32xx 1-003c: register write to 0x26 failed (error -6),val=1
  722. [    1.786182] usbcore: registered new interface driver usbhid
  723. [    1.786228] usbhid: USB HID core driver
  724. [    1.786515] rockchip-dmc dmc: failed to get the count of devfreq-event in /dmc node
  725. [    1.786943] rockchip-dmc dmc: Failed to get leakage
  726. [    1.787100] rockchip-dmc dmc: Failed to get pvtm
  727. [    1.787695] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
  728. [    [    1.791487] rknandc_base v1.1 2017-01-11
  729. [    1.791948] rksfc_base v1.1 2016-01-08
  730. [    1.800413] rk3308-acodec ff560000.acodec: Don't need pa-drv gpio
  731. [    1.800516] rk3308-acodec ff560000.acodec: De-pop as much as possible
  732. [    1.801729] 1-001a supply AVDD not found, using dummy regulator
  733. [    1.801878] 1-001a supply DVDD not found, using dummy regulator
  734. [    1.801988] 1-001a supply PVDD_A not found, using dummy regulator
  735. [    1.802091] 1-001a supply PVDD_B not found, using dummy regulator
  736. [    1.802202] 1-001a supply PVDD_C not found, using dummy regulator
  737. [    1.802316] 1-001a supply PVDD_D not found, using dting pdn_gpio: -16
  738. [    1.80334[    1.808898] rk-multicodecs bluetooth-sound: card: 0 has not been locked, re-probe again
  739. [    1.808943] rk-multicodecs bluetooth-sound: check_lock_card failed: -517
  740. [    1.809194] rk-multicodecs vad-sound: ASoC: CPU DAI (null) not registered
  741. [    1.810136] NET: Registered protocol family 10
  742. [    1.811386] NET: Registered protocol family 17
  743. [    1.811492] NET: Registered protocol family 15
  744. [    1.811766] Bluetooth: RFCOMM TTY layer initialized
  745. [    1.811793] Bluetooth: RFCOMM socket layer initialized
  746. [    1.811827] Bluetooth: RFCOMM ver 1.11
  747. [    1.811851] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  748. [    1.811867] Bluetooth: HIDP socket layer initialized
  749. [    1.811882] [WLAN_RFKILL]: Enter rfkill_wlan_init
  750. [    1.812391] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  751. [    1.812423] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6236
  752. [    1.812433] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  753. [    1.812477] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  754. [    1.812564] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 0, flags = 1.
  755. [    1.812580] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  756. [    1.812589] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  757. [    1.812610] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  758. [    1.812689] [BT_RFKILL]: Enter rfkill_rk_init
  759. [    1.813134] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 135.
  760. [    1.813175] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 139.
  761. [    1.813226] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 140.
  762. [    1.813238] [BT_RFKILL]: bluetooth_platdata_parse_dt: clk_get failed!!!.
  763. [    1.813305] [BT_RFKILL]: Request irq for bt wakeup host
  764. [    1.813371] [BT_RFKILL]: ** disable irq
  765. [    1.813568] [BT_RFKILL]: bt_default device registered.
  766. [    1.814110] flash vendor_init_thread!
  767. [    1.814151] flash vendor storage:20170308 ret = -1
  768. [    1.814813] vendor storage:20160801 ret = 0
  769. [    1.816134] input: adc-keys as /devices/platform/adc-keys/input/input0
  770. [    1.817331] rk-multicodecs bluetooth-sound: card: 0 has not been locked, re-probe again
  771. [    1.817356] rk-multicodecs bluetooth-sound: check_lock_card failed: -517
  772. [    1.890144] rk-multicodecs vad-sound: multicodec <-> pdm-i2s-dais mapping ok
  773. [    1.896249] rk-multicodecs bluetooth-sound: dummy_codec <-> ff350000.i2s mapping ok
  774. [    1.899553] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.2 (r)
  775. [    1.899614] ======== dhd_wlan_init_plat_data ========
  776. [    1.899637] dhd_wlan_init_gpio: GPIO(WL_REG_ON) = -1
  777. [    1.899658] dhd_wlan_init_gpio: GPIO(WL_HOST_WAKE) = -1
  778. [    1.899679] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
  779. [    1.899704] dhd_wlan_init_gpio: host_oob_irq: 36
  780. [    1.899742] dhd_wlan_init_gpio: host_oob_irq_flags=0x418
  781. [    1.899761] dhd_wifi_platform_load: Enter
  782. [    1.899855] Power-up adapter 'DHD generic adapter'
  783. [    1.899965] wifi_platform_set_power = 1
  784. [    1.899986] hctosys: unable to open rtc device (rtc0)
  785. [    1.900012] ======== PULL WL_REG_ON(-1) HIGH! ========
  786. [    1.900034] [WLAN_RFKILL]: rockchip_wifi_power: 1
  787. [    1.900055] [WLAN_RFKILL]: wifi turn on power. -1
  788. [    1.925158] vcc_sd: disabling
  789. [    1.925243] vccio_sd: disabling
  790. u▒   1.925960]
复制代码
回复

使用道具 举报

152

积分

0

威望

0

贡献

技术小白

积分
152
发表于 2020-7-27 16:41:35     
用自己的源码编译的镜像试试,  把wifi的配置先取消掉
回复

使用道具 举报

85

积分

0

威望

0

贡献

技术小白

积分
85
发表于 2020-8-7 17:18:37     
kernel/arch/arm64/configs/firefly-rk3308_linux_defconfig 檔內原本的CONFIG_WL_ROCKCHIP , CONFIG_WIFI_LOAD_DRIVER_WHEN_KERNEL_BOOTUP, CONFIG_AP6XXX 都已加 # 了

# CONFIG_WL_ROCKCHIP=y
# CONFIG_WIFI_LOAD_DRIVER_WHEN_KERNEL_BOOTUP=y
# CONFIG_AP6XXX=
回复

使用道具 举报

85

积分

0

威望

0

贡献

技术小白

积分
85
发表于 2020-8-20 13:27:56     
试过很多次 有时能 boot 有时不能 能boot 机的时候一定有 "ret 1024" 这个东西出现在 kernel,   不能 boot的时候便卡在 出 "ret 1024" 之前, 24 秒後 kernel 自动 reboot  ....

成功时:

  1. [    1.230567] input: adc-keys1 as /devices/platform/adc-keys1/input/input1
  2. [    1.231571] rk-multicodecs bluetooth-sound: card: 0 has not been locked, re-probe again
  3. [    1.231603] rk-multicodecs bluetooth-sound: check_lock_card failed: -517
  4. [    1.285904] rk-multicodecs vad-sound: multicodec <-> pdm-i2s-dais mapping ok
  5. [    1.289352] rk-multicodecs bluetooth-sound: dummy_codec <-> ff350000.i2s mapping ok
  6. [    1.291563] input: gpio-keys as /devices/platform/gpio-keys/input/input2
  7. [    2.305438] ret 1024
  8. [    2.306514] ALSA device list:
  9. [    2.306540]   #0: rockchip,rk3308-vad
  10. [    2.306572]   #1: rockchip,rk3308-pcm
  11. [    2.306591]   #7: Loopback 1
  12. [    2.310356] VFS: Mounted root (squashfs filesystem) readonly on device 179:6.
  13. [    2.312626] devtmpfs: mounted
  14. [    2.313009] Freeing unused kernel memory: 320K
复制代码


在 System.map 可看到

  1. ffffff80086db4a0 t __initcall_regulator_init_complete7s
  2. ffffff80086db4a8 t __initcall_drm_misc_init7s                          <---------------------
  3. ffffff80086db4b0 t __initcall_rockchip_clocks_loader_unprotect7s
  4. ffffff80086db4b8 t __initcall_clk_disable_unused7s
  5. ffffff80086db4c0 t __initcall_alsa_sound_last_init7s

复制代码


drm_misc_init 是跑在 regulator_init_complete 之後, rockchip_clocks_loader_unprotect 之前。 我在代码加了 "---->" 在 regulator_init_complete  rockchip_clocks_loader_unprotect  这2 个函数内, 证明了 "ret 1024" 是 drm_misc_init 内印出来。

  1.     1.230567] input: adc-keys1 as /devices/platform/adc-keys1/input/input1
  2. [    1.231571] rk-multicodecs bluetooth-sound: card: 0 has not been locked, re-probe again
  3. [    1.231603] rk-multicodecs bluetooth-sound: check_lock_card failed: -517
  4. [    1.285904] rk-multicodecs vad-sound: multicodec <-> pdm-i2s-dais mapping ok
  5. [    1.289352] rk-multicodecs bluetooth-sound: dummy_codec <-> ff350000.i2s mapping ok
  6. [    1.291563] input: gpio-keys as /devices/platform/gpio-keys/input/input2
  7. [    1.304214] ----->regulator_init_complete start 我加的
  8. [    1.304348] ----->regulator_init_complete stop 我加的
  9. [    2.305438] ret 1024
  10. [    2.305890] ----->start rockchip_clocks_loader_unprotect   我加的
  11. [    2.305933] ----->stop rockchip_clocks_loader_unprotect  我加的
  12. [    2.306514] ALSA device list:
  13. [    2.306540]   #0: rockchip,rk3308-vad
  14. [    2.306572]   #1: rockchip,rk3308-pcm
  15. [    2.306591]   #7: Loopback 1
  16. [    2.310356] VFS: Mounted root (squashfs filesystem) readonly on device 179:6.
  17. [    2.312626] devtmpfs: mounted
  18. [    2.313009] Freeing unused kernel memory: 320K
复制代码


但我找不到 drm_misc_init 这个函数!     

我亦试过在 kernel 不包含 DRM 这项,可是 kernel 便不能编译 !!!!


1. 那里可找到 drm_misc_init  这个函数 ?
2. DRM 可否 disable 而把 kernel 编译到?

回复

使用道具 举报

54

积分

0

威望

0

贡献

技术小白

积分
54
发表于 2020-8-23 21:26:43     
你好 问题解决了吗 我也是一样的问题
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表