face_rk3399 v2 无声音
Face-RK3399 V2硬件,使用rk3399-firefly-industry-71编译出的固件,ES8323无声音输出 官方下载固件启动输出如下DDR Version 1.23 20190709Inchannel 0CS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x72MR14=0x72MR18=0x0MR19=0x0MR24=0x8MR25=0x0channel 1CS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x72MR14=0x72MR18=0x0MR19=0x0MR24=0x8MR25=0x0channel 0 training pass!channel 1 training pass!change freq to 416MHz 0,1Channel 0: LPDDR4,416MHzBus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MBChannel 1: LPDDR4,416MHzBus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB256B stridechannel 0CS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x72MR14=0x72MR18=0x0MR19=0x0MR24=0x8MR25=0x0channel 1CS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x72MR14=0x72MR18=0x0MR19=0x0MR24=0x8MR25=0x0channel 0 training pass!channel 1 training pass!channel 0, cs 0, advanced training donechannel 1, cs 0, advanced training donechange freq to 856MHz 1,0ch 0 ddrconfig = 0x101, ddrsize = 0x20ch 1 ddrconfig = 0x101, ddrsize = 0x20pmugrf_os_reg = 0x3281F281, stride = 0x9OUTBoot1: 2018-08-06, version: 1.15CPUId = 0x0ChipType = 0x10, 224SdmmcInit=2 0BootCapSize=100000UserCapSize=14910MBFwPartOffset=2000 , 100000mmc0:cmd8,20mmc0:cmd5,20mmc0:cmd55,20mmc0:cmd1,20mmc0:cmd8,20mmc0:cmd5,20mmc0:cmd55,20mmc0:cmd1,20mmc0:cmd8,20mmc0:cmd5,20mmc0:cmd55,20mmc0:cmd1,20SdmmcInit=0 1StorageInit ok = 67847SecureMode = 0SecureInit read PBA: 0x4SecureInit read PBA: 0x404SecureInit read PBA: 0x804SecureInit read PBA: 0xc04SecureInit read PBA: 0x1004SecureInit read PBA: 0x1404SecureInit read PBA: 0x1804SecureInit read PBA: 0x1c04SecureInit ret = 0, SecureMode = 0GPT 0x3190d20 signature is wrongLoadTrust Addr:0x4000No find bl30.binLoad uboot, ReadLba = 2000Load OK, addr=0x200000, size=0x8ac34RunBL31 0x10000NOTICE:BL31: v1.3(debug):22b599aNOTICE:BL31: Built : 11:03:32, Jul 10 2019NOTICE:BL31: Rockchip release version: v1.1INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3INFO: Using opteed sec cpu_context!INFO: boot cpu mask: 0INFO: plat_rockchip_pmu_init(1181): pd status 3eINFO: BL31: Initializing runtime servicesINFO: BL31: Initializing BL32INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec7 06:11:20 UTC 2018 aarch64)INF TEE-CORE:init_primary_helper:338: Release version: 1.2
INF TEE-CORE:init_teecore:83: teecore inits doneINFO: BL31: Preparing for EL3 exit to normal worldINFO: Entry point address = 0x200000INFO: SPSR = 0x3c9
U-Boot 2014.10-RK3399-06 (Mar 18 2020 - 18:02:18)
CPU: rk3399cpu version = 0CPU's clock information: aplll = 816000000HZ apllb = 24000000HZ gpll = 800000000HZ aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ cpll = 800000000HZ dpll = 856000000HZ vpll = 24000000HZ npll = 24000000HZ ppll = 676000000HZBoard:Rockchip platform BoardUboot as second level loaderDRAM:Found dram banks: 1Adding bank:0000000000200000(000000007fe00000)Reserve memory for trust os.dram reserve bank: base = 0x08400000, size = 0x01e00000128 MiBSdmmcInit = 0 20storage init OK!Using default environment
GetParamremotectl v0.1pwm freq=0xb8320pwm_freq_nstime=0x52dLoad FDT from boot image.power key: bank-0 pin-5can't find dts node for fixedusb bc: can find node by path: /dwc-control-usb/usb_bcdwc_otg_check_dpdm: usb bc disconnectedpmic:rk808can't find dts node for pwm1set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=60CPU's clock information: aplll = 816000000HZ apllb = 24000000HZ gpll = 800000000HZ aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ cpll = 800000000HZ dpll = 856000000HZ vpll = 24000000HZ npll = 24000000HZ ppll = 676000000HZinvalide header tagca head not foundSecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2020-03-18#1.15empty serial no.normal boot.checkKeyvbus = 0board_fbt_key_pressed: ir_keycode = 0x0, frt = 0no fuel gauge foundno fuel gauge foundRockchip UBOOT DRM driver version: develop-v1.0.0pwrctr_name:lcd-55power, parse gpio:280, atv_val=1,delay:6mspwrctr_name:lcd-rst, parse gpio:540, atv_val=1,delay:6msread logo on state from dts no fuel gauge foundUsing display timing dtsDetailed mode clock 67000 kHz, flags H: 0800 0980 0990 1000 V: 1280 1288 1292 1296bus_format: 1009rk lcdc - 0 dclk set: dclk = 67000000HZ, pll select = 1, div = 1pwrctr: set lcd-55power(280)=1,delay:6mspwrctr: set lcd-rst(540)=1,delay:6msfinal DSI-Link bandwidth: 504 Mbps x 4ERROR: : Cannot find logo_kernel.bmp!failed to display kernel logocheckKeyvbus = 0board_fbt_key_pressed: ir_keycode = 0x0, frt = 0Hit any key to stop autoboot:0 Secure Boot state: 0kernel @ 0x00280000 (0x0133e008)ramdisk@ 0x04bf0000 (0x001e72e0)bootrk: do_bootm_linux... Loading Device Tree to 0000000004600000, end 0000000004618109 ... OKAdd bank:0000000000200000, 0000000008200000Add bank:000000000a200000, 0000000075e00000WARNING: could not set reg FDT_ERR_BADOFFSET.
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Initializing cgroup subsys cpuacct[ 0.000000] Initializing cgroup subsys schedtune[ 0.000000] Linux version 4.4.126 (zhengjy@tchipserver2) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #8 SMP PREEMPT Mon Mar 30 10:33:01 CST 2020[ 0.000000] Boot CPU: AArch64 Processor [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')[ 0.000000] bootconsole enabled[ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000[ 0.000000] psci: probing for conduit method from DT.[ 0.000000] psci: PSCIv1.0 detected in firmware.[ 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] psci: Trusted OS migration not required[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eef3000 s45528 r8192 d32296 u86016[ 0.000000] Detected VIPT I-cache on CPU0[ 0.000000] CPU features: enabling workaround for ARM erratum 845719[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 507912[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 coherent_pool=1m console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=disabled androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00020000@0x0002C000(recovery),0x00038000@0x0004C000(backup),0x00040000@0x00084000(cache),0x00300000@0x000C4000(system),0x00100000@0x003C4000(oem),0x00008000@0x004C4000(metadata),0x00000040@0x004CC000(verity_mode),0x00002000@0x004CC040(reserved),0x00000400@0x004CE040(frp),-@0x004CE440(userdata) storagemedia=emmc androidboot.oem_unlocked=0 uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2020-03-18_18:02:18 hdmi.vic=-1 SecureBootCheckOk=0 hwversion=0x00020003[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.000000] software IO TLB (0MB) mapped at [ 0.000000] Memory: 1984832K/2064384K available (11390K kernel code, 1720K rwdata, 5716K rodata, 832K init, 1137K bss, 63168K reserved, 16384K cma-reserved)[ 0.000000] Virtual kernel memory layout:[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)[ 0.000000] .init : 0xffffff8009140000 - 0xffffff8009210000 ( 832 KB)[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008ba0000 ( 11392 KB)[ 0.000000] .rodata : 0xffffff8008ba0000 - 0xffffff8009140000 (5760 KB)[ 0.000000] .data : 0xffffff8009210000 - 0xffffff80093be008 (1721 KB)[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 (4116 KB)[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)[ 0.000000] memory: 0xffffffc000200000 - 0xffffffc080000000 (2046 MB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1[ 0.000000] Preemptible hierarchical RCU implementation.[ 0.000000]Build-time adjustment of leaf fanout to 64.[ 0.000000]RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6[ 0.000000] NR_IRQS:64 nr_irqs:64 0[ 0.000000] GIC: Using split EOI/Deactivate mode[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000[ 0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)[ 0.000000] ITS: using cache flushing for cmd queue[ 0.000000] GIC: using LPI property table @0x000000000a280000[ 0.000000] ITS: Allocated 1792 chunks for LPIs[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000[ 0.000000] CPU0: using LPI pending table @0x000000000a290000[ 0.000000] GIC: using cache flushing for LPI property table[ 0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }[ 0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns[ 0.001988] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)[ 0.002974] pid_max: default: 32768 minimum: 301[ 0.003479] Security Framework initialized[ 0.003877] SELinux:Initializing.[ 0.004321] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)[ 0.004965] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)[ 0.006445] Initializing cgroup subsys memory[ 0.006888] Initializing cgroup subsys freezer[ 0.008245] sched-energy: Sched-energy-costs installed from DT[ 0.008807] CPU0: update cpu_capacity 401[ 0.009270] ASID allocator initialised with 32768 entries[ 0.026109] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created[ 0.027447] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created[ 0.039515] Detected VIPT I-cache on CPU1[ 0.039549] CPU1: found redistributor 1 region 0:0x00000000fef20000[ 0.039583] CPU1: using LPI pending table @0x000000000a3f0000[ 0.039625] CPU1: update cpu_capacity 401[ 0.039629] CPU1: Booted secondary processor [ 0.049490] Detected VIPT I-cache on CPU2[ 0.049510] CPU2: found redistributor 2 region 0:0x00000000fef40000[ 0.049543] CPU2: using LPI pending table @0x000000007bc20000[ 0.049570] CPU2: update cpu_capacity 401[ 0.049573] CPU2: Booted secondary processor [ 0.059523] Detected VIPT I-cache on CPU3[ 0.059542] CPU3: found redistributor 3 region 0:0x00000000fef60000[ 0.059574] CPU3: using LPI pending table @0x000000007bc60000[ 0.059599] CPU3: update cpu_capacity 401[ 0.059602] CPU3: Booted secondary processor [ 0.069571] Detected PIPT I-cache on CPU4[ 0.069598] CPU4: found redistributor 100 region 0:0x00000000fef80000[ 0.069637] CPU4: using LPI pending table @0x000000007bcb0000[ 0.069676] CPU4: update cpu_capacity 1024[ 0.069679] CPU4: Booted secondary processor [ 0.079595] Detected PIPT I-cache on CPU5[ 0.079612] CPU5: found redistributor 101 region 0:0x00000000fefa0000[ 0.079648] CPU5: using LPI pending table @0x000000007bce0000[ 0.079675] CPU5: update cpu_capacity 1024[ 0.079677] CPU5: Booted secondary processor [ 0.079762] Brought up 6 CPUs[ 0.092160] SMP: Total of 6 processors activated.[ 0.092613] CPU features: detected feature: GIC system register CPU interface[ 0.093300] CPU: All CPU(s) started at EL2[ 0.093735] alternatives: patching kernel code[ 0.096120] devtmpfs: initialized[ 0.118381] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns[ 0.119337] futex hash table entries: 2048 (order: 5, 131072 bytes)[ 0.121086] pinctrl core: initialized pinctrl subsystem[ 0.124542] Failed to find legacy iommu devices[ 0.125505] NET: Registered protocol family 16[ 0.126812] schedtune: init normalization constants...[ 0.127310] schedtune: CLUSTER min_pwr: 56 max_pwr: 222[ 0.127950] schedtune: CPU min_pwr: 0 max_pwr: 222[ 0.128577] schedtune: CPU min_pwr: 0 max_pwr: 222[ 0.129203] schedtune: CPU min_pwr: 0 max_pwr: 222[ 0.129828] schedtune: CPU min_pwr: 0 max_pwr: 222[ 0.130455] schedtune: CLUSTER min_pwr: 65 max_pwr:1108[ 0.131081] schedtune: CPU min_pwr: 0 max_pwr:1108[ 0.131715] schedtune: CPU min_pwr: 0 max_pwr:1108[ 0.132341] schedtune: SYSTEM min_pwr: 121 max_pwr:4434[ 0.132965] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12[ 0.133696] schedtune: verify normalization constants...[ 0.134205] schedtune: max_pwr/2^0: 4313 => norm_pwr:1024[ 0.134739] schedtune: max_pwr/2^1: 2156 => norm_pwr: 511[ 0.135280] schedtune: max_pwr/2^2: 1078 => norm_pwr: 255[ 0.135813] schedtune: max_pwr/2^3:539 => norm_pwr: 127[ 0.136347] schedtune: max_pwr/2^4:269 => norm_pwr: 63[ 0.136881] schedtune: max_pwr/2^5:134 => norm_pwr: 31[ 0.137415] schedtune: configured to support 5 boost groups[ 0.149148] cpuidle: using governor ladder[ 0.163122] cpuidle: using governor menu[ 0.163529] Registered FIQ tty driver[ 0.164726] vdso: 2 pages (1 code @ ffffff8008ba6000, 1 data @ ffffff8009214000)[ 0.165456] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[ 0.167286] DMA: preallocated 1024 KiB pool for atomic allocations[ 0.195233] console enabled[ 0.195873] pstore: Registered ramoops as persistent store backend[ 0.196470] ramoops: attached 0xf0000@0x110000, ecc: 0/0[ 0.201067] fiq debugger fiq mode enabled[[ 0.201823] console enabled 0.201823] console enabled[ 0.202506] bootconsole disabled[ 0.202506] bootconsole disabled[ 0.203129] Registered fiq debugger ttyFIQ0[ 0.235654] rockchip-pinctrl pinctrl: pin gpio4-29 already requested by pinctrl; cannot claim for vcc5v0-host-regulator[ 0.235674] rockchip-pinctrl pinctrl: pin-157 (vcc5v0-host-regulator) status -22[ 0.235686] rockchip-pinctrl pinctrl: could not request pin 157 (gpio4-29) from group host-vbus-drvon device rockchip-pinctrl[ 0.235697] reg-fixed-voltage vcc5v0-host-regulator: Error applying setting, reverse things back[ 0.237384] firefly_hwversion: V2.3[ 0.237821] iommu: Adding device ff650000.vpu_service to group 0[ 0.237889] iommu: Adding device ff660000.rkvdec to group 1[ 0.237953] iommu: Adding device ff670000.iep to group 2[ 0.238042] iommu: Adding device ff8f0000.vop to group 3[ 0.238112] iommu: Adding device ff900000.vop to group 4[ 0.238220] iommu: Adding device ff910000.isp to group 5[ 0.238291] iommu: Adding device ff920000.isp to group 6[ 0.238977] rk_iommu ff670800.iommu: can't get aclk[ 0.238997] rk_iommu ff670800.iommu: can't get hclk[ 0.239899] SCSI subsystem initialized[ 0.240227] usbcore: registered new interface driver usbfs[ 0.240268] usbcore: registered new interface driver hub[ 0.240344] usbcore: registered new device driver usb[ 0.240731] media: Linux media interface: v0.10[ 0.240767] Linux video capture interface: v2.00[ 0.240935] pps_core: LinuxPPS API ver. 1 registered[ 0.240944] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.240966] PTP clock support registered[ 0.242591] Advanced Linux Sound Architecture Driver Initialized.[ 0.243094] Bluetooth: Core ver 2.21[ 0.243141] NET: Registered protocol family 31[ 0.243149] Bluetooth: HCI device and connection manager initialized[ 0.243162] Bluetooth: HCI socket layer initialized[ 0.243174] Bluetooth: L2CAP socket layer initialized[ 0.243200] Bluetooth: SCO socket layer initialized[ 0.243930] rockchip-cpuinfo cpuinfo: Serial : 0425f331ba9645e5[ 0.244520] clocksource: Switched to clocksource arch_sys_counter[ 0.289425] thermal thermal_zone1: power_allocator: sustainable_power will be estimated[ 0.289668] NET: Registered protocol family 2[ 0.290114] TCP established hash table entries: 16384 (order: 5, 131072 bytes)[ 0.290259] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)[ 0.290534] TCP: Hash tables configured (established 16384 bind 16384)[ 0.290616] UDP hash table entries: 1024 (order: 3, 32768 bytes)[ 0.290674] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)[ 0.290862] NET: Registered protocol family 1[ 0.291805] Trying to unpack rootfs image as initramfs...[ 0.390550] Freeing initrd memory: 1948K[ 0.391266] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available[ 0.391359] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available[ 0.394319] audit: initializing netlink subsys (disabled)[ 0.394419] audit: type=2000 audit(0.386:1): initialized[ 0.399741] VFS: Disk quotas dquot_6.6.0[ 0.399876] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 0.400942] Registering sdcardfs 0.1[ 0.401525] fuse init (API version 7.23)[ 0.402642] [ 0.402642] TEE Core Framework initialization (ver 1:0.1)[ 0.402670] TEE armv7 Driver initialization[ 0.403077] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"[ 0.403096] TEE core: Alloc the misc device "opteearmtz00" (id=0)[ 0.403278] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=61)[ 0.407079] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)[ 0.407104] io scheduler noop registered[ 0.407271] io scheduler cfq registered (default)[ 0.408539] phy phy-ff770000.syscon:usb2-phy@e450.0: Failed to get VBUS supply regulator[ 0.409443] phy phy-ff770000.syscon:usb2-phy@e460.2: Failed to get VBUS supply regulator[ 0.412684] ace test_init function.[ 0.412845] wiegandOut_probe[ 0.412900] wiegandOut_probe gpiod0 41 [ 0.412931] wiegandOut_probe gpiod1 42 [ 0.412962] wiegandOut_probe gpio_mode_switch 49 [ 0.412974] wiegandOut_probe level-effect 1[ 0.412997] wiegandOut_probe, end ret=0 [ 0.413025] ace test_init end.ret=0 [ 0.413183] firefly_hwversion_in_range firefly,wiegand-receive: hwversion >= 0x00020000[ 0.413193] firefly_hwversion_in_range firefly,wiegand-receive: hwversion in range(1 conditions)[ 0.413211] wiegand_rec_probe: start [ 0.413368] input: firefly_wiegand_recv as /devices/platform/wiegand-receive/input/input0[ 0.413618] wiegand_rec_probe:d0_irq=106,d1_irq=104[ 0.413706] wiegand initialized[ 0.414028] input: firefly_radar as /devices/platform/radar-gpio/input/input1[ 0.414071] radar gpio:98[ 0.414124] radar_probe, end ret=0 [ 0.414160] radar end.ret=0 [ 0.415632] firefly_hwversion_in_range firefly,rk3399-face-white-led: hwversion >= 0x00020003[ 0.415651] firefly_hwversion_in_range firefly,rk3399-face-white-led: hwversion in range(1 conditions)[ 0.415659] face_white_led_probe [ 0.415682] zjy face_white_led_parse_dt 36 [ 0.416468] backlight supply power not found, using dummy regulator[ 0.416853] iep: failed to find iep power down clock source.[ 0.417201] IEP Power ON[ 0.417360] IEP Power OFF[ 0.417435] IEP Driver loaded succesfully[ 0.417560] Module initialized.[ 0.417830] rk-vcodec ff650000.vpu_service: no regulator for vcodec[ 0.418064] rk-vcodec ff650000.vpu_service: probe device[ 0.418227] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled[ 0.418725] rk-vcodec f000.vpu_service: could not find power_model node[ 0.418742] rk-vcodec ff650000.vpu_service: init success[ 0.418935] rk-vcodec ff660000.rkvdec: no regulator for vcodec[ 0.419338] rk-vcodec ff660000.rkvdec: probe device[ 0.419525] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled[ 0.419918] rk-vcodec ff660000.rkvdec: could not find power_model node[ 0.419936] rk-vcodec ff660000.rkvdec: init success[ 0.421609] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330[ 0.421631] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12[ 0.422968] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330[ 0.422990] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16[ 0.425056] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled[ 0.425641] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A[ 0.426197] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 38, base_baud = 1500000) is a 16550A[ 0.426653] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 40, base_baud = 1500000) is a 16550A[ 0.427060] Initialized drm 1.1.0 20060810[ 0.430937] Rockchip DRM driver version: v1.0.0[ 0.431285] rockchip-drm display-subsystem: dmc is disabled[ 0.431584] rockchip-vop ff900000.vop: missing rockchip,grf property[ 0.431843] rockchip-vop ff900000.vop: unable to request PWM[ 0.431874] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)[ 0.431925] rockchip-vop ff8f0000.vop: missing rockchip,grf property[ 0.432100] rockchip-vop ff8f0000.vop: unable to request PWM[ 0.432124] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)[ 0.432146] rockchip-drm display-subsystem: failed to bind ff960000.dsi (ops dw_mipi_dsi_ops): -517[ 0.432393] rockchip-drm display-subsystem: master bind failed: -517[ 0.434277] panel_simple: parse lcd-55power: gpio=56, atv_val=1, delay=6ms[ 0.434292] panel_simple: parse lcd-rst: gpio=92, atv_val=1, delay=6ms[ 0.434325] ff960000.dsi.0 supply power not found, using dummy regulator[ 0.435063] mali ff9a0000.gpu: Failed to get regulator[ 0.435082] mali ff9a0000.gpu: Power control initialization failed[ 0.435406] Unable to detect cache hierarchy for CPU 0[ 0.443477] brd: module loaded[ 0.448490] loop: module loaded[ 0.449023] zram: Added device: zram0[ 0.449749] Loading dl1825 driver[ 0.449984] SCSI Media Changer driver v0.25 [ 0.450797] register spi return v = :0[ 0.450844] register firefly_spi_init spi return v = :0[ 0.450913] tun: Universal TUN/TAP device driver, 1.6[ 0.450921] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>[ 0.451913] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.[ 0.452009] rk_gmac-dwmac fe300000.ethernet: clock input or output? (output).[ 0.452026] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).[ 0.452037] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).[ 0.452076] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).[ 0.452316] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed[ 0.457348] rk_gmac-dwmac fe300000.ethernet: init for RMII[ 0.457476] stmmac - user ID: 0x10, Synopsys ID: 0x35[ 0.457489]Ring mode enabled[ 0.457496]DMA HW capability register supported[ 0.457503]Normal descriptors[ 0.457513]RX Checksum Offload Engine supported (type 2)[ 0.457519]Wake-Up On Lan supported[ 0.457560]Enable RX Mitigation via HW Watchdog Timer[ 0.524016] libphy: stmmac: probed[ 0.524036] eth%d: PHY ID 001cc816 at 0 IRQ POLL (stmmac-0:00) active[ 0.524046] eth%d: PHY ID 001cc816 at 1 IRQ POLL (stmmac-0:01)[ 0.525016] PPP generic driver version 2.4.2[ 0.525281] PPP BSD Compression module registered[ 0.525319] PPP Deflate Compression module registered[ 0.525361] PPP MPPE Compression module registered[ 0.525423] NET: Registered protocol family 24[ 0.525494] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).[ 0.525503] CSLIP: code copyright 1989 Regents of the University of California.[ 0.525620] usbcore: registered new interface driver mt7601u[ 0.525673] Rockchip WiFi SYS interface (V1.00) ... [ 0.525769] usbcore: registered new interface driver catc[ 0.525867] usbcore: registered new interface driver kaweth[ 0.525885] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver[ 0.525941] usbcore: registered new interface driver pegasus[ 0.525999] usbcore: registered new interface driver rtl8150[ 0.526085] usbcore: registered new interface driver r8152[ 0.526103] hso: drivers/net/usb/hso.c: Option Wireless[ 0.526179] usbcore: registered new interface driver hso[ 0.526251] usbcore: registered new interface driver asix[ 0.526339] usbcore: registered new interface driver ax88179_178a[ 0.526396] usbcore: registered new interface driver cdc_ether[ 0.526453] usbcore: registered new interface driver cdc_eem[ 0.526538] usbcore: registered new interface driver dm9601[ 0.526611] usbcore: registered new interface driver smsc75xx[ 0.526679] usbcore: registered new interface driver smsc95xx[ 0.526766] usbcore: registered new interface driver gl620a[ 0.526823] usbcore: registered new interface driver net1080[ 0.526879] usbcore: registered new interface driver plusb[ 0.526972] usbcore: registered new interface driver rndis_host[ 0.527036] usbcore: registered new interface driver cdc_subset[ 0.527093] usbcore: registered new interface driver zaurus[ 0.527151] usbcore: registered new interface driver MOSCHIP usb-ethernet driver[ 0.527261] usbcore: registered new interface driver int51x1[ 0.527318] usbcore: registered new interface driver kalmia[ 0.527417] usbcore: registered new interface driver ipheth[ 0.527478] usbcore: registered new interface driver sierra_net[ 0.527536] usbcore: registered new interface driver cx82310_eth[ 0.527604] usbcore: registered new interface driver cdc_ncm[ 0.527691] usbcore: registered new interface driver qmi_wwan[ 0.527757] usbcore: registered new interface driver cdc_mbim[ 0.534437] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd[ 0.539219] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd[ 0.540385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 0.540403] ehci-pci: EHCI PCI platform driver[ 0.540497] ehci-platform: EHCI generic platform driver[ 0.544154] ehci-platform fe380000.usb: EHCI Host Controller[ 0.544351] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1[ 0.544561] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000[ 0.554747] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00[ 0.554892] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002[ 0.554922] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.554933] usb usb1: Product: EHCI Host Controller[ 0.554943] usb usb1: Manufacturer: Linux 4.4.126 ehci_hcd[ 0.554952] usb usb1: SerialNumber: fe380000.usb[ 0.555391] hub 1-0:1.0: USB hub found[ 0.555442] hub 1-0:1.0: 1 port detected[ 0.559324] ehci-platform fe3c0000.usb: EHCI Host Controller[ 0.559497] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2[ 0.559656] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000[ 0.567894] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00[ 0.568139] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002[ 0.568163] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.568177] usb usb2: Product: EHCI Host Controller[ 0.568189] usb usb2: Manufacturer: Linux 4.4.126 ehci_hcd[ 0.568201] usb usb2: SerialNumber: fe3c0000.usb[ 0.568832] hub 2-0:1.0: USB hub found[ 0.568882] hub 2-0:1.0: 1 port detected[ 0.569722] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 0.569782] ohci-platform: OHCI generic platform driver[ 0.570208] ohci-platform fe3a0000.usb: Generic Platform OHCI controller[ 0.570469] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3[ 0.570684] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000[ 0.625401] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001[ 0.625439] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.625454] usb usb3: Product: Generic Platform OHCI controller[ 0.625468] usb usb3: Manufacturer: Linux 4.4.126 ohci_hcd[ 0.625481] usb usb3: SerialNumber: fe3a0000.usb[ 0.626108] hub 3-0:1.0: USB hub found[ 0.626169] hub 3-0:1.0: 1 port detected[ 0.626843] ohci-platform fe3e0000.usb: Generic Platform OHCI controller[ 0.627115] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4[ 0.627306] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000[ 0.661199] drivers/gpio/gpio-wiegand-receive.c,wiegand_do_timer,201,rf_card->count=2 arg=0[ 0.682055] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001[ 0.682094] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.682109] usb usb4: Product: Generic Platform OHCI controller[ 0.682122] usb usb4: Manufacturer: Linux 4.4.126 ohci_hcd[ 0.682135] usb usb4: SerialNumber: fe3e0000.usb[ 0.682777] hub 4-0:1.0: USB hub found[ 0.682985] hub 4-0:1.0: 1 port detected[ 0.685000] usbcore: registered new interface driver cdc_acm[ 0.685124] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters[ 0.685402] usbcore: registered new interface driver usblp[ 0.685633] usbcore: registered new interface driver cdc_wdm[ 0.685863] usbcore: registered new interface driver uas[ 0.686145] usbcore: registered new interface driver usb-storage[ 0.686290] usbcore: registered new interface driver ums-alauda[ 0.686511] usbcore: registered new interface driver ums-cypress[ 0.686732] usbcore: registered new interface driver ums-datafab[ 0.686952] usbcore: registered new interface driver ums_eneub6250[ 0.687173] usbcore: registered new interface driver ums-freecom[ 0.687401] usbcore: registered new interface driver ums-isd200[ 0.687615] usbcore: registered new interface driver ums-jumpshot[ 0.687837] usbcore: registered new interface driver ums-karma[ 0.688061] usbcore: registered new interface driver ums-onetouch[ 0.688283] usbcore: registered new interface driver ums-sddr09[ 0.688503] usbcore: registered new interface driver ums-sddr55[ 0.688724] usbcore: registered new interface driver ums-usbat[ 0.688853] usbcore: registered new interface driver usbserial[ 0.688908] usbcore: registered new interface driver usbserial_generic[ 0.688948] usbserial: USB Serial support registered for generic[ 0.689013] usbcore: registered new interface driver option[ 0.689051] usbserial: USB Serial support registered for GSM modem (1-port)[ 0.689309] usbcore: registered new interface driver trancevibrator[ 0.689328] usb20_otg: version 3.10a 21-DEC-2012[ 0.689637] usb20_host: version 3.10a 21-DEC-2012[ 0.690862] usbcore: registered new interface driver xpad[ 0.690954] usbcore: registered new interface driver usb_acecad[ 0.691026] usbcore: registered new interface driver aiptek[ 0.691109] usbcore: registered new interface driver gtco[ 0.691168] usbcore: registered new interface driver hanwang[ 0.691259] usbcore: registered new interface driver kbtab[ 0.692162] .. rk pwm remotectl v1.1 init[ 0.692509] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input2[ 0.693077] sensor_register_slave:mma8452,id=17[ 0.693117] sensor_register_slave:lis3dh,id=7[ 0.693133] sensor_register_slave:mma7660,id=18[ 0.693148] sensor_register_slave:lsm303d,id=22[ 0.693162] sensor_register_slave:gs_mc3230,id=23[ 0.693172] gsensor_init[ 0.693187] sensor_register_slave:mpu6880_acc,id=24[ 0.693224] sensor_register_slave:mpu6500_acc,id=25[ 0.693239] sensor_register_slave:lsm330_acc,id=26[ 0.693253] sensor_register_slave:bma2xx_acc,id=27[ 0.693268] sensor_register_slave:akm8975,id=30[ 0.693282] sensor_register_slave:akm8963,id=31[ 0.693296] sensor_register_slave:l3g4200d,id=45[ 0.693310] sensor_register_slave:l3g20d,id=46[ 0.693324] sensor_register_slave:ewtsa,id=47[ 0.693338] sensor_register_slave:lsm330_gyro,id=51[ 0.693353] sensor_register_slave:cm3217,id=53[ 0.693367] sensor_register_slave:cm3218,id=54[ 0.693381] sensor_register_slave:ls_stk3410,id=62[ 0.693397] sensor_register_slave:ps_stk3410,id=67[ 0.694500] i2c /dev entries driver[ 0.696215] fan53555-regulator 0-0040: FAN53555 Option Rev Detected![ 0.696338] fan53555-reg: supplied by vcc5v0_sys[ 0.699015] fan53555-regulator 0-0041: FAN53555 Option Rev Detected![ 0.699108] fan53555-reg: supplied by vcc5v0_sys[ 0.701424] rockchip-pinctrl pinctrl: pin gpio1-18 already requested by 0-0040; cannot claim for 0-001b[ 0.701462] rockchip-pinctrl pinctrl: pin-50 (0-001b) status -22[ 0.701478] rockchip-pinctrl pinctrl: could not request pin 50 (gpio1-18) from group pmic-dvs2on device rockchip-pinctrl[ 0.701490] rk808 0-001b: Error applying setting, reverse things back[ 0.701953] rk808 0-001b: Pmic Chip id: 0x0[ 0.705502] rk808-regulator rk808-regulator: there is no dvs0 gpio[ 0.705604] rk808-regulator rk808-regulator: there is no dvs1 gpio[ 0.705760] DCDC_REG1: supplied by vcc3v3_sys[ 0.706709] DCDC_REG2: supplied by vcc3v3_sys[ 0.707442] DCDC_REG3: supplied by vcc3v3_sys[ 0.707803] DCDC_REG4: supplied by vcc3v3_sys[ 0.708420] LDO_REG1: supplied by vcc3v3_sys[ 0.709693] LDO_REG2: supplied by vcc3v3_sys[ 0.710807] LDO_REG3: supplied by vcc3v3_sys[ 0.711874] LDO_REG4: supplied by vcc3v3_sys[ 0.712789] vcc_sd: Failed to create debugfs directory[ 0.712913] LDO_REG5: supplied by vcc3v3_sys[ 0.714003] LDO_REG6: supplied by vcc3v3_sys[ 0.715124] LDO_REG7: supplied by vcc3v3_sys[ 0.716201] LDO_REG8: supplied by vcc3v3_sys[ 0.717300] SWITCH_REG1: supplied by vcc3v3_sys[ 0.717707] SWITCH_REG2: supplied by vcc3v3_sys[ 0.718336] firefly_hwversion_in_range rockchip,rk808-rtc: hwversion should < 0x00020000![ 0.718381] rk808-rtc: probe of rk808-rtc failed with error -22[ 0.718512] rk808 0-001b: Can not read property pmic,stby-gpio[ 0.718584] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009948000[ 0.719445] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff800994a000[ 0.720295] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff800994c000[ 0.721127] firefly_hwversion_in_range haoyu,hym8563: hwversion >= 0x00020000[ 0.721163] firefly_hwversion_in_range haoyu,hym8563: hwversion in range(1 conditions)[ 0.728601] rtc-hym8563 7-0051: rtc core: registered hym8563 as rtc0[ 0.729833] firefly_hwversion_in_range firefly,dl1825: hwversion >= 0x00020000[ 0.729869] firefly_hwversion_in_range firefly,dl1825: hwversion in range(1 conditions)[ 0.730090] input: firefly_nfc as /devices/platform/ff160000.i2c/i2c-7/7-0035/input/input3[ 0.730317] zjy dl1825_probe [ 0.730616] dl1825_probe : requesting IRQ 137[ 0.730674] zjy dl1825 exited successfully[ 0.730728] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff800994e000[ 1.064582] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009950000[ 1.065917] IR NEC protocol handler initialized[ 1.065959] IR RC5(x/sz) protocol handler initialized[ 1.065977] IR RC6 protocol handler initialized[ 1.065993] IR JVC protocol handler initialized[ 1.066010] IR Sony protocol handler initialized[ 1.066026] IR SANYO protocol handler initialized[ 1.066041] IR Sharp protocol handler initialized[ 1.066057] IR MCE Keyboard/mouse protocol handler initialized[ 1.066072] IR XMP protocol handler initialized[ 1.066425] usbcore: registered new interface driver uvcvideo[ 1.066451] USB Video Class driver (1.1.1)[ 1.066473] CamSys driver version: v0.41.0, CamSys head file version: v1.0.0[ 1.072401] __power_supply_register: Expected proper parent device for 'test_ac'[ 1.072607] __power_supply_register: Expected proper parent device for 'test_battery'[ 1.072970] thermal thermal_zone2: power_allocator: sustainable_power will be estimated[ 1.073134] __power_supply_register: Expected proper parent device for 'test_usb'[ 1.076676] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647[ 1.078164] pc9202: sw2001_read(0x1) return 0x1[ 1.078196] status=0x1[ 1.078207] ====== i2c detect success watchdog init========[ 1.078652] device-mapper: uevent: version 1.0.3[ 1.079053] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com[ 1.079306] Bluetooth: HCI UART driver ver 2.3[ 1.079328] Bluetooth: HCI UART protocol H4 registered[ 1.079338] Bluetooth: HCI UART protocol LL registered[ 1.079352] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x[ 1.079361] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2[ 1.079369] rtk_btusb: Register usb char device interface for BT driver[ 1.079633] usbcore: registered new interface driver rtk_btusb[ 1.080316] cpu cpu0: bin=1[ 1.080409] cpu cpu0: leakage=27[ 1.092698] cpu cpu0: temp=45625, pvtm=151834 (151570 + 264)[ 1.093094] cpu cpu0: pvtm-volt-sel=2[ 1.093201] cpu cpu0: bin-scale=34[ 1.093597] cpu cpu4: bin=1[ 1.093689] cpu cpu4: leakage=50[ 1.105708] cpu cpu4: temp=45625, pvtm=160251 (160111 + 140)[ 1.105864] cpu cpu4: pvtm-volt-sel=3[ 1.105954] cpu cpu4: bin-scale=17[ 1.107452] cpu cpu0: avs=0, target-scale=34[ 1.107587] cpu cpu0: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0[ 1.109359] cpu cpu4: avs=0, target-scale=17[ 1.109490] cpu cpu4: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0[ 1.112012] sdhci: Secure Digital Host Controller Interface driver[ 1.112047] sdhci: Copyright(c) Pierre Ossman[ 1.112064] Synopsys Designware Multimedia Card Interface Driver[ 1.113356] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.[ 1.113515] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.[ 1.113535] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a[ 1.113609] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo[ 1.113663] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.[ 1.113721] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found[ 1.113732] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found[ 1.114873] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.[ 1.114979] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.[ 1.114998] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a[ 1.115047] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo[ 1.115070] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.[ 1.115672] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done[ 1.115859] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done[ 1.128016] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)[ 1.142372] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized[ 1.142894] sdhci-pltfm: SDHCI platform and OF driver helper[ 1.144970] sdhci-arasan fe330000.sdhci: No vmmc regulator found[ 1.145008] sdhci-arasan fe330000.sdhci: No vqmmc regulator found[ 1.171337] mmc1: SDHCI controller on fe330000.sdhci using ADMA[ 1.175876] hidraw: raw HID events driver (C) Jiri Kosina[ 1.178459] usbcore: registered new interface driver usbhid[ 1.178479] usbhid: USB HID core driver[ 1.178632] inv_mpu_iio: inv_mpu_init:746[ 1.179282] ashmem: initialized[ 1.185086] rknandbase v1.1 2016-11-08[ 1.186030] usbcore: registered new interface driver snd-usb-audio[ 1.187240] firefly_hwversion_in_range everest,es8323: hwversion > 0x00010000[ 1.187302] firefly_hwversion_in_range everest,es8323: hwversion in range(1 conditions)[ 1.212148] mmc1: MAN_BKOPS_EN bit is not set[ 1.224409] mmc1: new HS400 Enhanced strobe MMC card at address 0001[ 1.225469] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB [ 1.226517] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB[ 1.227152] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB[ 1.227694] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB[ 1.228357] rkpart: partition size too small (2)[ 1.228383] uboot: 0x000400000 -- 0x000800000 (4 MB)[ 1.228395] trust: 0x000800000 -- 0x000c00000 (4 MB)[ 1.228406] misc: 0x000c00000 -- 0x001000000 (4 MB)[ 1.228417] resource: 0x001000000 -- 0x002000000 (16 MB)[ 1.228428] kernel: 0x002000000 -- 0x003800000 (24 MB)[ 1.228439] boot: 0x003800000 -- 0x005800000 (32 MB)[ 1.228450] recovery: 0x005800000 -- 0x009800000 (64 MB)[ 1.228461] backup: 0x009800000 -- 0x010800000 (112 MB)[ 1.228471] cache: 0x010800000 -- 0x018800000 (128 MB)[ 1.228482] system: 0x018800000 -- 0x078800000 (1536 MB)[ 1.228496] oem: 0x078800000 -- 0x098800000 (512 MB)[ 1.228508] metadata: 0x098800000 -- 0x099800000 (16 MB)[ 1.228518] verity_mode: 0x099800000 -- 0x099808000 (0 MB)[ 1.228529] reserved: 0x099808000 -- 0x099c08000 (4 MB)[ 1.228540] frp: 0x099c08000 -- 0x099c88000 (0 MB)[ 1.228551] userdata: 0x099c88000 -- 0x3a3a00000 (12445 MB)[ 1.228637]mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16[ 2.184930] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 2.185086] ES8323 1-0010: i2c recv Failed[ 2.185165] ES8323: probe of 1-0010 failed with error -110[ 2.185642] firefly_hwversion_in_range everest,es8323: hwversion in range(0 conditions)[ 2.186968] ES8323 7-0011: Can not read property hp_ctl_gpio[ 2.187063] ES8323 7-0011: Can not read property hp_det_gpio[ 2.187261] ES8323 7-0011: Can not read property aux_det_gpio[ 2.200621] u32 classifier[ 2.200681] Actions configured[ 2.200796] Netfilter messages via NETLINK v0.30.[ 2.200938] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)[ 2.201933] ctnetlink v0.93: registering with nfnetlink.[ 2.203759] xt_time: kernel timezone is -0000[ 2.206257] ip_tables: (C) 2000-2006 Netfilter Core Team[ 2.206859] arp_tables: (C) 2002 David S. Miller[ 2.207963] Initializing XFRM netlink socket[ 2.208998] NET: Registered protocol family 10[ 2.211852] mip6: Mobile IPv6[ 2.211947] ip6_tables: (C) 2000-2006 Netfilter Core Team[ 2.216293] sit: IPv6 over IPv4 tunneling driver[ 2.217345] NET: Registered protocol family 17[ 2.217468] NET: Registered protocol family 15[ 2.217685] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.[ 2.220954] Bridge firewalling registered[ 2.221042] Ebtables v2.0 registered[ 2.221870] Bluetooth: RFCOMM TTY layer initialized[ 2.222055] Bluetooth: RFCOMM socket layer initialized[ 2.222281] Bluetooth: RFCOMM ver 1.11[ 2.222534] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 2.222736] Bluetooth: BNEP filters: protocol multicast[ 2.222971] Bluetooth: BNEP socket layer initialized[ 2.223201] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 2.223423] Bluetooth: HIDP socket layer initialized[ 2.223678] l2tp_core: L2TP core driver, V2.0[ 2.223885] l2tp_ppp: PPPoL2TP kernel driver, V2.0[ 2.224105] : Enter rfkill_wlan_init[ 2.224982] : Enter rfkill_wlan_probe[ 2.225166] : wlan_platdata_parse_dt: wifi_chip_type = ap6181[ 2.225323] : wlan_platdata_parse_dt: enable wifi power control.[ 2.225549] : wlan_platdata_parse_dt: wifi power controled by gpio.[ 2.225898] : wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.[ 2.225999] : rfkill_wlan_probe: init gpio[ 2.226229] : Exit rfkill_wlan_probe[ 2.226542] : Enter rfkill_rk_init[ 2.227587] sensor_register_slave:mpu6500_gyro,id=49[ 2.227623] sensor_register_slave:mpu6880_gyro,id=50[ 2.230807] Registered cp15_barrier emulation handler[ 2.230967] Registered setend emulation handler[ 2.232719] registered taskstats version 1[ 2.233809] rockchip ion idev is NULL[ 2.233883] rga2 ff680000.rga: rga ion client create success![ 2.234435] rga: Driver loaded successfully ver:3.02[ 2.237294] Rockchip DRM driver version: v1.0.0[ 2.238309] rockchip-drm display-subsystem: dmc is disabled[ 2.239200] rockchip-vop ff900000.vop: missing rockchip,grf property[ 2.239893] rockchip-vop ff900000.vop: unable to request PWM[ 2.240029] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)[ 2.240137] rockchip-vop ff8f0000.vop: missing rockchip,grf property[ 2.240623] rockchip-vop ff8f0000.vop: unable to request PWM[ 2.240746] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)[ 2.240901] rockchip-drm display-subsystem: bound ff960000.dsi (ops dw_mipi_dsi_ops)[ 2.242387] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports[ 2.242544] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver[ 2.243026] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)[ 2.247520] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)[ 2.247644] Supports vblank timestamp caching Rev 2 (21.10.2013).[ 2.247899] No driver support for vblank timestamp query.[ 2.249615] vendor storage:20160801 ret = 0[ 2.290621] rockchip-drm display-subsystem: fb0:frame buffer device[ 2.304276] mali ff9a0000.gpu: leakage=35[ 2.316970] mali ff9a0000.gpu: temp=46250, pvtm=127420 (127360 + 60)[ 2.317825] mali ff9a0000.gpu: pvtm-volt-sel=2[ 2.319461] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0[ 2.319849] mali ff9a0000.gpu: Protected mode not available[ 2.320405] mali ff9a0000.gpu: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0[ 2.320473] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model[ 2.320605] I : : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; : 414; : kbase_devfreq_init(); success initing power_model_simple.[ 2.321653] mali ff9a0000.gpu: Probed as mali0[ 2.328884] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller[ 2.329331] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5[ 2.329966] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010[ 2.330079] xhci-hcd xhci-hcd.10.auto: irq 236, io mem 0xfe800000[ 2.330534] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002[ 2.330755] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.330980] usb usb5: Product: xHCI Host Controller[ 2.331244] usb usb5: Manufacturer: Linux 4.4.126 xhci-hcd[ 2.331461] usb usb5: SerialNumber: xhci-hcd.10.auto[ 2.332732] hub 5-0:1.0: USB hub found[ 2.332850] hub 5-0:1.0: 1 port detected[ 2.333621] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller[ 2.334081] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6[ 2.334361] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.[ 2.334692] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003[ 2.334985] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.335207] usb usb6: Product: xHCI Host Controller[ 2.335432] usb usb6: Manufacturer: Linux 4.4.126 xhci-hcd[ 2.335657] usb usb6: SerialNumber: xhci-hcd.10.auto[ 2.336831] hub 6-0:1.0: USB hub found[ 2.336950] hub 6-0:1.0: 1 port detected[ 2.340839] xhci-hcd xhci-hcd.10.auto: remove, state 1[ 2.340908] usb usb6: USB disconnect, device number 1[ 2.346072] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller[ 2.346540] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 7[ 2.347137] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010[ 2.347499] xhci-hcd xhci-hcd.11.auto: irq 237, io mem 0xfe900000[ 2.347986] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002[ 2.348169] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.348390] usb usb7: Product: xHCI Host Controller[ 2.348611] usb usb7: Manufacturer: Linux 4.4.126 xhci-hcd[ 2.348834] usb usb7: SerialNumber: xhci-hcd.11.auto[ 2.349720] hub 7-0:1.0: USB hub found[ 2.349808] hub 7-0:1.0: 1 port detected[ 2.350385] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller[ 2.350638] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 8[ 2.350771] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.[ 2.351029] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003[ 2.351148] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 2.351371] usb usb8: Product: xHCI Host Controller[ 2.351591] usb usb8: Manufacturer: Linux 4.4.126 xhci-hcd[ 2.351815] usb usb8: SerialNumber: xhci-hcd.11.auto[ 2.352657] hub 8-0:1.0: USB hub found[ 2.352787] hub 8-0:1.0: 1 port detected[ 2.354849] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.[ 2.355039] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.[ 2.355190] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a[ 2.355425] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo[ 2.355637] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.[ 2.355890] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found[ 2.356067] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found[ 2.356712] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq[ 2.365889] xhci-hcd xhci-hcd.10.auto: Host not halted after 16000 microseconds.[ 2.365922] xhci-hcd xhci-hcd.10.auto: Host controller not halted, aborting reset.[ 2.365982] xhci-hcd xhci-hcd.10.auto: USB bus 6 deregistered[ 2.366319] xhci-hcd xhci-hcd.10.auto: remove, state 1[ 2.366357] usb usb5: USB disconnect, device number 1[ 2.366858] xhci-hcd xhci-hcd.10.auto: USB bus 5 deregistered[ 2.367962] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)[ 2.381535] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized[ 2.399782] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)[ 2.401457] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)[ 2.403112] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)[ 2.406056] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)[ 2.409693] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)[ 2.496885] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)[ 2.503508] mmc2: new high speed SDIO card at address 0001[ 2.507562] asoc-simple-card es8323-sound-new: ES8323 HiFi <-> ff890000.i2s mapping ok[ 2.507726] asoc-simple-card es8323-sound-new: ASoC: no source widget found for MICBIAS1[ 2.508040] asoc-simple-card es8323-sound-new: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack[ 2.508231] asoc-simple-card es8323-sound-new: ASoC: no sink widget found for IN1P[ 2.508456] asoc-simple-card es8323-sound-new: ASoC: Failed to add route Mic Jack -> direct -> IN1P[ 2.508680] asoc-simple-card es8323-sound-new: ASoC: no source widget found for HPOL[ 2.508904] asoc-simple-card es8323-sound-new: ASoC: Failed to add route HPOL -> direct -> Headphone Jack[ 2.509128] asoc-simple-card es8323-sound-new: ASoC: no source widget found for HPOR[ 2.509352] asoc-simple-card es8323-sound-new: ASoC: Failed to add route HPOR -> direct -> Headphone Jack[ 2.513921] input: rockchip,es8323-codec Headphone Jack as /devices/platform/es8323-sound-new/sound/card0/input4[ 2.517762] i2c i2c-2: sensor_probe: gs_mc3230,ffffffc07b2f0000[ 2.517944] sensors 2-004c: sensor_chip_init:gs_mc3230:devid=0x0,ops=0xffffff80092dcfe8[ 2.548765] init_3230_ctl_data 445 : error: -6[ 2.548836] sensors 2-004c: sensor_initial:fail to init sensor[ 2.548860] sensors 2-004c: sensor_chip_init:fail to init sensor[ 2.548884] i2c i2c-2: sensor_probe failed -2[ 2.548884] [ 2.548942] sensors: probe of 2-004c failed with error -2[ 2.550482] rtc-hym8563 7-0051: setting system clock to 2017-02-01 16:51:33 UTC (1485967893)[ 2.553227] It doesn't contain Rogue gpu[ 2.587417] vcc_sd: disabling[ 2.588999] ret 1024[ 2.589744] I : : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; : 417; : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-5a358d3302', rk_ko_ver is '5', built at '10:32:37', on 'Mar 30 2020'.[ 2.590499] Mali: Mali device driver loaded[ 2.591587] input: rk29-keypad as /devices/platform/rockchip-key/input/input5[ 2.594937] ALSA device list:[ 2.595001] #0: rockchip,es8323-codec[ 2.595759] Freeing unused kernel memory: 832K[ 2.598690] init: init first stage started![ 2.600328] init: init second stage started![ 2.603094] init: Setting ro.rk.soc=rk3399[ 2.603253] init: OK,EMMC DRIVERS INIT OK[ 2.603387] init: property_set("ro.boot.mode", "emmc") failed[ 2.603674] init: property_set("ro.hardware", "rk30board") failed[ 2.603959] init: Running restorecon...[ 2.604199] init: waitpid failed: No child processes[ 2.604734] init: (Loading properties from /default.prop took 0.00s.)[ 2.607250] init: (Parsing /init.environ.rc took 0.00s.)[ 2.607838] init: (Parsing /init.usb.rc took 0.00s.)[ 2.609403] init: (Parsing init.rk30board.bootmode.emmc.rc took 0.00s.)[ 2.610459] init: (Parsing init.rk30board.usb.rc took 0.00s.)[ 2.610576] init: (Parsing init.rk30board.environment.rc took 0.00s.)[ 2.610811] init: could not import file '/init.stt_trace.rc' from '/init.debug.rc': No such file or directory[ 2.611309] init: (Parsing /init.logs.rc took 0.00s.)[ 2.611624] init: (Parsing /init.crashlogd.rc took 0.00s.)[ 2.611827] init: (Parsing /init.coredump.rc took 0.00s.)[ 2.612014] init: (Parsing /init.log-watch.rc took 0.00s.)[ 2.612238] init: (Parsing /init.kernel.rc took 0.00s.)[ 2.612521] init: (Parsing /init.debug-charging.rc took 0.00s.)[ 2.612629] init: (Parsing /init.debug.rc took 0.00s.)[ 2.612846] init: (Parsing init.rockchip.rc took 0.00s.)[ 2.613739] init: (Parsing init.connectivity.rc took 0.00s.)[ 2.613824] init: could not import file 'init.box.samba.rc' from '/init.rk30board.rc': No such file or directory[ 2.614143] init: (Parsing init.rk3399.rc took 0.00s.)[ 2.614326] init: init.tablet.rc: 23: invalid keyword 'ioprio'[ 2.614487] init: (Parsing init.tablet.rc took 0.00s.)[ 2.614692] init: could not import file 'init.car.rc' from '/init.rk30board.rc': No such file or directory[ 2.614905] init: could not import file 'init.optee.rc' from '/init.rk30board.rc': No such file or directory[ 2.615109] init: (Parsing /init.rk30board.rc took 0.01s.)[ 2.616316] init: (Parsing /init.usb.configfs.rc took 0.00s.)[ 2.616626] init: (Parsing /init.zygote64_32.rc took 0.00s.)[ 2.616736] init: (Parsing /init.rc took 0.01s.)[ 2.617368] init: Starting service 'ueventd'...[ 2.623219] ueventd: ueventd started![ 2.624132] ueventd: invalid gid 'trace'[ 2.629561] init: write_file: Unable to open '/proc/self/coredump_filter': No such file or directory[ 2.629789] init: write_file: Unable to open '/proc/sys/kernel/panic_on_stackoverflow': No such file or directory[ 2.629972] init: Waiting for /dev/.coldboot_done...[ 2.812664] ueventd: Coldboot took 0.19s.[ 2.814226] init: Waiting for /dev/.coldboot_done took 0.18s.[ 2.814468] init: /dev/hw_random not found[ 2.816680] keychord: using input dev ff420030.pwm for fevent[ 2.816776] keychord: using input dev rk29-keypad for fevent[ 2.828809] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory[ 2.846146] EXT4-fs (mmcblk1p11): mounted filesystem with ordered data mode. Opts: (null)[ 2.846288] Registered swp emulation handler[ 2.846596] init: write_file: Unable to open '/sys/module/rockchip_pm/parameters/policy': No such file or directory[ 2.847294] fs_mgr: Warning: unknown flag resize[ 2.847446] init: /dev/hw_random not found[ 2.847662] init: write_file: Unable to open '/sys/block/mmcblk0/bdi/read_ahead_kb': No such file or directory[ 2.848564] fs_mgr: Warning: unknown flag resize[ 2.853069] EXT4-fs (mmcblk1p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc[ 2.853133] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/system,target=/system,type=ext4)=0[ 2.854815] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/cache,/cache,ext4)=-1: No such file or directory[ 2.855347] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/cache[ 2.862603] random: e2fsck: uninitialized urandom read (40 bytes read, 34 bits of entropy available)[ 2.908941] e2fsck: e2fsck 1.42.9 (28-Dec-2013)[ 2.908941] [ 2.909139] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/cache: recovering journal[ 2.909139] [ 2.909268] e2fsck: Setting free inodes count to 8153 (was 8154)[ 2.909268] [ 2.909311] e2fsck: Setting free blocks count to 31027 (was 31029)[ 2.909311] [ 2.909448] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/cache: clean, 39/8192 files, 1741/32768 blocks[ 2.909448] [ 2.916406] EXT4-fs (mmcblk1p9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard[ 2.916560] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/cache,target=/cache,type=ext4)=0[ 2.918597] EXT4-fs (mmcblk1p12): Ignoring removed nomblk_io_submit option[ 2.921324] EXT4-fs (mmcblk1p12): recovery complete[ 2.921369] EXT4-fs (mmcblk1p12): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit[ 2.921452] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/metadata,/metadata,ext4)=0: Success[ 2.941011] fs_mgr: check_fs(): unmount(/metadata) succeeded[ 2.941081] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/metadata[ 2.943293] random: e2fsck: uninitialized urandom read (40 bytes read, 37 bits of entropy available)[ 2.963394] e2fsck: e2fsck 1.42.9 (28-Dec-2013)[ 2.963394] [ 2.963580] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/metadata: clean, 12/1024 files, 1105/4096 blocks (check in 3 mounts)[ 2.963580] [ 2.968699] EXT4-fs (mmcblk1p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard[ 2.968861] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/metadata,target=/metadata,type=ext4)=0[ 2.970766] EXT4-fs (mmcblk1p16): Ignoring removed nomblk_io_submit option[ 3.034359] EXT4-fs (mmcblk1p16): recovery complete[ 3.035112] EXT4-fs (mmcblk1p16): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit[ 3.035228] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/userdata,/data,ext4)=0: Success[ 3.054917] fs_mgr: check_fs(): unmount(/data) succeeded[ 3.055132] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/userdata[ 3.059105] random: e2fsck: uninitialized urandom read (40 bytes read, 45 bits of entropy available)[ 3.095693] e2fsck: e2fsck 1.42.9 (28-Dec-2013)[ 3.095693] [ 3.095812] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/userdata: clean, 1122/796544 files, 167929/3186040 blocks[ 3.095812] [ 3.105126] EXT4-fs (mmcblk1p16): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,errors=panic[ 3.105231] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/userdata,target=/data,type=ext4)=0[ 3.110272] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)[ 3.110641] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)[ 3.110941] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)[ 3.111372] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)[ 3.111721] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)[ 3.112062] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)[ 3.112370] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)[ 3.112679] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)[ 3.113070] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)[ 3.113365] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)[ 3.113677] init: (Parsing /system/etc/init/gtinpu.rc took 0.00s.)[ 3.114001] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)[ 3.114294] init: (Parsing /system/etc/init/installd.rc took 0.00s.)[ 3.114651] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)[ 3.114935] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)[ 3.115440] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)[ 3.115785] init: (Parsing /system/etc/init/logd.rc took 0.00s.)[ 3.116086] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)[ 3.116387] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)[ 3.116686] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)[ 3.116990] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)[ 3.117320] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)[ 3.117655] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)[ 3.118042] init: (Parsing /system/etc/init/netd.rc took 0.00s.)[ 3.118342] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)[ 3.118637] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)[ 3.118949] init: ignored duplicate definition of service 'ril-daemon'init: (Parsing /system/etc/init/rild.rc took 0.00s.)[ 3.119301] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)[ 3.119582] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)[ 3.119882] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)[ 3.120184] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)[ 3.120469] init: (Parsing /system/etc/init/vold.rc took 0.00s.)[ 3.121100] init: Starting service 'logd'...[ 3.127148] init: insmod: open("/system/lib/modules/ump.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/mali.ko") failed: No such file or directory[ 3.127386] random: logd: uninitialized urandom read (40 bytes read, 47 bits of entropy available)[ 3.171459] logd.auditd: start[ 3.171532] logd.klogd: 3167009500[ 3.209231] midgard_kbase: disagrees about version of symbol module_layout[ 3.214077] init: finit_module for "/system/lib/modules/mali_kbase.ko" failed: Exec format errorinit: insmod: open("/system/lib/modules/rk30_mirroring.ko") failed: No such file or directoryinit: finit_module for "/system/lib/modules/rk29-ipp.ko" failed: Exec format errorinit: insmod: open("/system/lib/modules/pvrsrvkm.ko") failed: No such file or directoryinit: finit_module for "/drmboot.ko" failed: Exec format errorfs_mgr: Warning: unknown flag resize[ 3.219533] zram0: detected capacity change from 0 to 533413888[ 3.224140] random: mkswap: uninitialized urandom read (40 bytes read, 52 bits of entropy available)[ 3.262087] random: mkswap: uninitialized urandom read (16 bytes read, 54 bits of entropy available)[ 3.264019] Adding 520908k swap on /dev/block/zram0.Priority:-1 extents:1 across:520908k SS[ 3.266852] init: property_set("ro.board.platform", "rk3399") failed[ 3.267626] init: property_set("ro.rk.screenoff_time", "60000") failed[ 3.267983] init: property_set("ro.rk.screenshot_enable", "true") failed[ 3.268216] init: (Loading properties from /system/build.prop took 0.00s.)[ 3.268372] init: (Loading properties from /vendor/build.prop took 0.00s.)[ 3.268434] init: (Loading properties from /factory/factory.prop took 0.00s.)[ 3.268690] fs_mgr: Warning: unknown flag resize[ 3.268867] init: /recovery not specified in fstab[ 3.269285] init: Starting service 'debuggerd'...[ 3.270038] init: Starting service 'debuggerd64'...[ 3.271353] init: Starting service 'vold'...[ 3.273433] random: debuggerd64: uninitialized urandom read (40 bytes read, 54 bits of entropy available)[ 3.273850] init: Not bootcharting.[ 3.278109] random: debuggerd: uninitialized urandom read (40 bytes read, 55 bits of entropy available)[ 3.289257] random: vold: uninitialized urandom read (40 bytes read, 56 bits of entropy available)[ 3.308933] random: vdc: uninitialized urandom read (40 bytes read, 58 bits of entropy available)[ 3.385109] fs_mgr: Warning: unknown flag resize[ 3.409859] init: Failed to reload policy[ 3.410202] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...[ 3.433672] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 221) exited with status 0[ 3.441497] EXT4-fs (mmcblk1p16): Unrecognized mount option "seclabel" or missing value[ 3.443427] init: write_file: Unable to open '/proc/sys/kernel/core_pattern': No such file or directory[ 3.443767] init: (Loading properties from /data/local.prop took 0.00s.)[ 3.538697] init: Starting service 'logd-reinit'...[ 3.540841] init: write_file: Unable to open '/proc/sys/vm/min_free_order_shift': No such file or directory[ 3.544939] init: Starting service 'healthd'...[ 3.545814] init: cannot find '/system/bin/displayd' (No such file or directory), disabling 'displayd'[ 3.546912] init: Starting service 'earlylogs'...[ 3.547938] init: Starting service 'lmkd'...[ 3.548968] init: Starting service 'servicemanager'...[ 3.550084] init: Starting service 'surfaceflinger'...[ 3.555721] init: write_file: Unable to open '/proc/sys/vm/lazy_vfree_tlb_flush_all_threshold': No such file or directory[ 3.561839] init: Starting service 'exec 2 (/system/bin/busybox)'...[ 3.562985] binder: 224:224 transaction failed 29189/-22, size 0-0 line 2948[ 3.573517] init: Service 'exec 2 (/system/bin/busybox)' (pid 229) exited with status 1[ 3.574652] init: Starting service 'fsud'...[ 3.576022] init: Starting service 'vm_daemon'...[ 3.580359] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'[ 3.580401] init: write: cannot expand '${ro.serialno}'[ 3.582513] init: Service 'earlylogs' (pid 225) exited with status 0[ 3.584679] file system registered[ 3.586740] using random self ethernet address[ 3.586769] using random host ethernet address[ 3.586866] init: write_file: Unable to open '/config/usb_gadget/g1/functions/rndis.gs4/wceis': Permission denied[ 3.597573] init: Starting service 'console'...[ 3.598816] init: Starting service 'adbd'...[ 3.605276] logd.daemon: reinit[ 3.607573] init: Service 'logd-reinit' (pid 223) exited with status 0[ 3.607733] init: Starting service 'ap_log_srv'...[ 3.608471] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_verifier)'[ 3.608553] init: Starting service 'ril-daemon'...[ 3.609091] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'[ 3.609145] init: Starting service 'drmservice'...[ 3.609679] init: cannot find '/system/bin/bplus_helper' (No such file or directory), disabling 'bplus_helper'[ 3.609716] init: Starting service 'up_eth0'...[ 3.610417] init: cannot find '/system/bin/rk_store_keybox' (No such file or directory), disabling 'rk_store_keybox'[ 3.610624] init: Starting service 'akmd'...[ 3.611686] rk_gmac-dwmac fe300000.ethernet: rk_get_eth_addr: mac address: 76:8f:08:20:b9:69[ 3.611689] init: Starting service 'zygote'...[ 3.611720] eth0: device MAC address 76:8f:08:20:b9:69[ 3.612404] init: Starting service 'zygote_secondary'...[ 3.613386] init: Starting service 'audioserver'...[ 3.614414] init: Starting service 'cameraserver'...[ 3.617006] init: couldn't write 244 to /dev/cpuset/camera-daemon/tasks: No such file or directory[ 3.623375] init: Starting service 'drm'...[ 3.624286] init: Starting service 'installd'...[ 3.630069] init: Starting service 'keystore'...[ 3.634065] init: Starting service 'mediacodec'...[ 3.637457] init: Starting service 'mediadrm'...[ 3.639663] init: Starting service 'mediaextractor'...rk3399_firefly_face:/ $ [ 3.641062] init: Starting service 'media'...[ 3.641871] init: Starting service 'netd'...[ 3.643443] init: Service 'up_eth0' (pid 238) exited with status 0[ 3.643706] init: Service 'akmd' (pid 239) exited with status 254[ 3.643939] init: Starting service 'crashlogd'...[ 3.644772] init: Starting service 'log-watch'...[ 3.645604] init: Starting service 'gatekeeperd'...[ 3.646317] init: Starting service 'perfprofd'...[ 3.667782] ret = ffffffffffffffff[ 3.676009] init: property 'sys.serialno' doesn't exist while expanding '${sys.serialno}'[ 3.677161] init: setprop: cannot expand '${sys.serialno}'[ 3.679861] init: Service 'drmservice' (pid 237) exited with status 0[ 3.753031] init: Starting service 'apk_logfs'...[ 3.762803] init: Service 'ap_log_srv' (pid 235) exited with status 0[ 3.815729] read descriptors[ 3.815786] read strings[ 4.026426] init: Untracked pid 318 exited with status 0[ 4.122321] init: Untracked pid 334 exited with status 0[ 4.234479] init: Starting service 'bootanim'...[ 4.565992] healthd: BatteryCurrentNowPath not found[ 4.566045] healthd: BatteryCycleCountPath not found[ 4.836806] random: nonblocking pool is initialized[ 5.032326] Freeing drm_logo memory: 3000K[ 5.124580] init: Untracked pid 322 exited with status 1[ 5.129865] init: Untracked pid 338 exited with status 1[ 5.171234] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 5.171281] E:camsys_i2c_write(84): i2c write dev(addr:0x36) failed!,err = -110[ 5.346504] capability: warning: `system_server' uses 32-bit capabilities (legacy support in use)[ 6.171229] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 6.171264] E:camsys_i2c_write(84): i2c write dev(addr:0x80) failed!,err = -110[ 6.183318] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp[ 6.183466] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22[ 6.183667] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl[ 6.183887] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back[ 6.184103] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed![ 7.194770] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 7.194845] E:camsys_i2c_write(84): i2c write dev(addr:0x46) failed!,err = -110[ 8.194777] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 8.194858] E:camsys_i2c_write(84): i2c write dev(addr:0x80) failed!,err = -110[ 8.309910] acc_open[ 8.309941] acc_release[ 9.110281] sdcardfs version 2.0[ 9.110377] sdcardfs: dev_name -> /data/media[ 9.110567] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,mask=6,userid=0,gid=1015[ 9.110815] sdcardfs: mnt -> ffffffc069033360[ 9.111127] sdcardfs: mounted on top of /data/media type ext4[ 9.112660] sdcardfs version 2.0[ 9.112805] sdcardfs: dev_name -> /data/media[ 9.113004] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,mask=23,userid=0,gid=9997[ 9.113257] sdcardfs: mnt -> ffffffc046042aa0[ 9.113537] sdcardfs: mounted on top of /data/media type ext4[ 9.115168] sdcardfs version 2.0[ 9.115349] sdcardfs: dev_name -> /data/media[ 9.115547] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,mask=7,userid=0,gid=9997[ 9.116579] sdcardfs: mnt -> ffffffc0460438a0[ 9.116663] sdcardfs: mounted on top of /data/media type ext4[ 9.247918] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 9.247969] E:camsys_i2c_write(84): i2c write dev(addr:0x36) failed!,err = -110[ 10.247905] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 10.247938] E:camsys_i2c_write(84): i2c write dev(addr:0x80) failed!,err = -110[ 10.262762] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp[ 10.262783] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22[ 10.262794] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl[ 10.262804] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back[ 10.262818] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed![ 10.751619] init: cannot find '/system/bin/glgps' (No such file or directory), disabling 'gpsd'[ 10.751817] init: Starting service 'mode_switch'...[ 10.752702] init: Starting service 'tp_mode_switch'...[ 10.753831] init: Starting service 'exec 4 (/system/bin/gti_npu_permission.sh)'...[ 10.789846] init: Service 'tp_mode_switch' (pid 1056) exited with status 1[ 11.012496] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller[ 11.012919] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5[ 11.028739] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010[ 11.028819] xhci-hcd xhci-hcd.10.auto: irq 236, io mem 0xfe800000[ 11.029017] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002[ 11.029041] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 11.029051] usb usb5: Product: xHCI Host Controller[ 11.029059] usb usb5: Manufacturer: Linux 4.4.126 xhci-hcd[ 11.029067] usb usb5: SerialNumber: xhci-hcd.10.auto[ 11.032108] hub 5-0:1.0: USB hub found[ 11.032582] hub 5-0:1.0: 1 port detected[ 11.033058] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller[ 11.037423] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6[ 11.037999] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.[ 11.038146] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003[ 11.038157] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 11.038167] usb usb6: Product: xHCI Host Controller[ 11.038175] usb usb6: Manufacturer: Linux 4.4.126 xhci-hcd[ 11.038184] usb usb6: SerialNumber: xhci-hcd.10.auto[ 11.040149] hub 6-0:1.0: USB hub found[ 11.040457] hub 6-0:1.0: 1 port detected[ 11.041581] rockchip-dwc3 usb@fe800000: USB HOST connected[ 11.042364] rockchip-dwc3 usb@fe800000: set new mode successfully[ 11.042557] rockchip-dwc3 usb@fe900000: Not support set mode![ 11.043772] init: Service 'mode_switch' (pid 1054) exited with status 1[ 11.051832] init: Service 'exec 4 (/system/bin/gti_npu_permission.sh)' (pid 1058) exited with status 0[ 11.052168] init: Starting service 'exec 5 (/system/bin/bootstat)'...[ 11.084133] init: Service 'exec 5 (/system/bin/bootstat)' (pid 1113) exited with status 0[ 11.084851] init: Starting service 'exec 6 (/system/bin/bootstat)'...[ 11.095564] init: Service 'exec 6 (/system/bin/bootstat)' (pid 1116) exited with status 0[ 11.095879] init: Starting service 'exec 7 (/system/bin/bootstat)'...[ 11.122609] init: Service 'exec 7 (/system/bin/bootstat)' (pid 1117) exited with status 0[ 11.122861] init: Starting service 'exec 8 (/system/bin/bootstat)'...[ 11.143812] init: Service 'exec 8 (/system/bin/bootstat)' (pid 1119) exited with status 0[ 11.145996] init: Starting service 'exec 9 (/system/bin/gti_npu_permission.sh)'...[ 11.274593] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 11.274647] E:camsys_i2c_write(84): i2c write dev(addr:0x46) failed!,err = -110[ 11.615206] init: Service 'exec 9 (/system/bin/gti_npu_permission.sh)' (pid 1128) exited with status 0[ 11.615614] init: Starting service 'exec 10 (/system/bin/gti_npu_permission.sh)'...[ 11.818875] init: Untracked pid 1299 exited with status 0[ 11.818937] init: Untracked pid 1322 exited with status 0[ 11.903677] init: Untracked pid 1339 exited with status 0[ 11.907838] init: Untracked pid 1330 exited with status 0[ 11.908923] ttyS0 - failed to request DMA, use interrupt mode[ 11.954044] init: Service 'exec 10 (/system/bin/gti_npu_permission.sh)' (pid 1283) exited with status 0[ 12.274631] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 12.274676] E:camsys_i2c_write(84): i2c write dev(addr:0x80) failed!,err = -110[ 13.318143] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 13.318207] E:camsys_i2c_write(84): i2c write dev(addr:0x36) failed!,err = -110[ 13.666609] init: Service 'bootanim' is being killed...[ 13.903797] init: Service 'bootanim' (pid 349) killed by signal 9[ 13.921134] init: Untracked pid 1517 exited with status 0[ 13.959241] init: Untracked pid 1528 exited with status 0[ 14.317984] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 14.318032] E:camsys_i2c_write(84): i2c write dev(addr:0x80) failed!,err = -110[ 14.329562] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp[ 14.329591] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22[ 14.329602] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl[ 14.329855] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back[ 14.329863] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed![ 14.959148] init: Untracked pid 1303 exited with status 0[ 14.969422] init: Untracked pid 1335 exited with status 0[ 14.982503] init: Untracked pid 1531 exited with status 0[ 14.991814] init: Untracked pid 1520 exited with status 0[ 15.338156] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 15.338237] E:camsys_i2c_write(84): i2c write dev(addr:0x46) failed!,err = -110[ 16.338129] rk3x-i2c ff110000.i2c: timeout, ipd: 0x00, state: 1[ 16.338201] E:camsys_i2c_write(84): i2c write dev(addr:0x80) failed!,err = -110
下载官方rk3399_firefly_industry_android7.1,按照官方教程编译固件,升级固件后,启动输出如下DDR Version 1.15 20181010InChannel 0: LPDDR4,50MHzCS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x4DMR14=0x4DMR18=0x0MR19=0x0MR24=0x8MR25=0x0Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MBChannel 1: LPDDR4,50MHzCS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x4DMR14=0x4DMR18=0x0MR19=0x0MR24=0x8MR25=0x0Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB256B stridechannel 0CS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x72MR14=0x72MR18=0x0MR19=0x0MR24=0x8MR25=0x0channel 1CS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x72MR14=0x72MR18=0x0MR19=0x0MR24=0x8MR25=0x0channel 0 training pass!channel 1 training pass!change freq to 400MHz 0,1channel 0CS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x72MR14=0x72MR18=0x0MR19=0x0MR24=0x8MR25=0x0channel 1CS = 0MR0=0x98MR4=0x2MR5=0xFFMR8=0x8MR12=0x72MR14=0x72MR18=0x0MR19=0x0MR24=0x8MR25=0x0channel 0 training pass!channel 1 training pass!change freq to 800MHz 1,0ch 0 ddrconfig = 0x101, ddrsize = 0x20ch 1 ddrconfig = 0x101, ddrsize = 0x20pmugrf_os_reg = 0x3281F281, stride = 0x9OUTBoot1: 2018-08-06, version: 1.15CPUId = 0x0ChipType = 0x10, 219SdmmcInit=2 0BootCapSize=100000UserCapSize=14910MBFwPartOffset=2000 , 100000mmc0:cmd8,20mmc0:cmd5,20mmc0:cmd55,20mmc0:cmd1,20mmc0:cmd8,20mmc0:cmd5,20mmc0:cmd55,20mmc0:cmd1,20mmc0:cmd8,20mmc0:cmd5,20mmc0:cmd55,20mmc0:cmd1,20SdmmcInit=0 1StorageInit ok = 67755SecureMode = 0SecureInit read PBA: 0x4SecureInit read PBA: 0x404SecureInit read PBA: 0x804SecureInit read PBA: 0xc04SecureInit read PBA: 0x1004SecureInit read PBA: 0x1404SecureInit read PBA: 0x1804SecureInit read PBA: 0x1c04SecureInit ret = 0, SecureMode = 0GPT 0x3190d20 signature is wrongLoadTrust Addr:0x4000No find bl30.binLoad uboot, ReadLba = 2000Load OK, addr=0x200000, size=0xbfa0cRunBL31 0x10000NOTICE:BL31: v1.3(debug):4f4079bNOTICE:BL31: Built : 17:40:23, Oct 11 2018NOTICE:BL31: Rockchip release version: v1.1INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3INFO: Using opteed sec cpu_context!INFO: boot cpu mask: 0INFO: plat_rockchip_pmu_init(1151): pd status 3eINFO: BL31: Initializing runtime servicesINFO: BL31: Initializing BL32INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-170-gc4654a6 #16 Wed May 30 08:54:30 UTC 2018 aarch64)
INF TEE-CORE:init_primary_helper:338: Release version: 1.2
INF TEE-CORE:init_teecore:83: teecore inits doneINFO: BL31: Preparing for EL3 exit to normal worldINFO: Entry point address = 0x200000INFO: SPSR = 0x3c9
U-Boot 2014.10-RK3399-06 (May 09 2020 - 15:21:28)
CPU: rk3399cpu version = 0CPU's clock information: aplll = 816000000HZ apllb = 24000000HZ gpll = 800000000HZ aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ cpll = 800000000HZ dpll = 800000000HZ vpll = 24000000HZ npll = 24000000HZ ppll = 676000000HZBoard:Rockchip platform BoardUboot as second level loaderDRAM:Found dram banks: 1Adding bank:0000000000200000(000000007fe00000)Reserve memory for trust os.dram reserve bank: base = 0x08400000, size = 0x01e00000128 MiBSdmmcInit = 0 20storage init OK!Using default environment
GetParamLoad FDT from resource image.power key: bank-0 pin-5can't find dts node for fixedusb bc: can find node by path: /dwc-control-usb/usb_bcpmic:rk808can't find dts node for pwm1set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=60CPU's clock information: aplll = 816000000HZ apllb = 24000000HZ gpll = 800000000HZ aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ cpll = 800000000HZ dpll = 800000000HZ vpll = 24000000HZ npll = 24000000HZ ppll = 676000000HZCan't find dts node for fuel guage cw201xcan't find dts node for ec-batteryCan't find dts node for charger bq25700invalide header tagca head not foundSecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2020-05-09#1.15empty serial no.normal boot.checkKeyvbus = 1no fuel gauge foundno fuel gauge foundRockchip UBOOT DRM driver version: develop-v1.0.0pwrctr_name:lcd-55power, parse gpio:280, atv_val=1,delay:6mspwrctr_name:lcd-rst, parse gpio:540, atv_val=1,delay:6msread logo on state from dts no fuel gauge foundERROR: : Cannot find logo_face.bmp!failed to display uboot logoERROR: : Cannot find logo_kernel.bmp!failed to display kernel logoHit any key to stop autoboot:0 load fdt from resouce.hwversion: get version fail!hwversion: V<NULL>Secure Boot state: 0kernel @ 0x00280000 (0x012c6008)ramdisk@ 0x04bf0000 (0x001e6e9c)bootrk: do_bootm_linux... Loading Device Tree to 0000000004600000, end 00000000046173ce ... OKAdd bank:0000000000200000, 0000000008200000Add bank:000000000a200000, 0000000075e00000WARNING: could not set reg FDT_ERR_BADOFFSET.
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0[ 0.000000] Initializing cgroup subsys cpuset[ 0.000000] Initializing cgroup subsys cpu[ 0.000000] Initializing cgroup subsys cpuacct[ 0.000000] Initializing cgroup subsys schedtune[ 0.000000] Linux version 4.4.126 (ljrh@ljrh-srv) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Sat May 9 12:02:22 CST 2020[ 0.000000] Boot CPU: AArch64 Processor [ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')[ 0.000000] bootconsole enabled[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB[ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000[ 0.000000] psci: probing for conduit method from DT.[ 0.000000] psci: PSCIv1.0 detected in firmware.[ 0.000000] psci: Using standard PSCI v0.2 function IDs[ 0.000000] psci: Trusted OS migration not required[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eef8000 s45528 r8192 d32296 u86016[ 0.000000] Detected VIPT I-cache on CPU0[ 0.000000] CPU features: enabling workaround for ARM erratum 845719[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 507912[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=disabled androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00020000@0x0002C000(recovery),0x00038000@0x0004C000(backup),0x00040000@0x00084000(cache),0x00300000@0x000C4000(system),0x00100000@0x003C4000(oem),0x00008000@0x004C4000(metadata),0x00000040@0x004CC000(verity_mode),0x00002000@0x004CC040(reserved),0x00000400@0x004CE040(frp),-@0x004CE440(userdata) storagemedia=emmc androidboot.oem_unlocked=0 uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2020-05-09_15:21:28 SecureBootCheckOk=0 hwversion=<NULL>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)[ 0.000000] software IO TLB (0MB) mapped at [ 0.000000] Memory: 1988356K/2064384K available (11134K kernel code, 1688K rwdata, 5516K rodata, 832K init, 1131K bss, 59644K reserved, 16384K cma-reserved)[ 0.000000] Virtual kernel memory layout:[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)[ 0.000000] .init : 0xffffff80090d0000 - 0xffffff80091a0000 ( 832 KB)[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008b60000 ( 11136 KB)[ 0.000000] .rodata : 0xffffff8008b60000 - 0xffffff80090d0000 (5568 KB)[ 0.000000] .data : 0xffffff80091a0000 - 0xffffff8009346008 (1689 KB)[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 (4116 KB)[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)[ 0.000000] memory: 0xffffffc000200000 - 0xffffffc080000000 (2046 MB)[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1[ 0.000000] Preemptible hierarchical RCU implementation.[ 0.000000]Build-time adjustment of leaf fanout to 64.[ 0.000000]RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6[ 0.000000] NR_IRQS:64 nr_irqs:64 0[ 0.000000] GIC: Using split EOI/Deactivate mode[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000[ 0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)[ 0.000000] ITS: using cache flushing for cmd queue[ 0.000000] GIC: using LPI property table @0x000000000a280000[ 0.000000] ITS: Allocated 1792 chunks for LPIs[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000[ 0.000000] CPU0: using LPI pending table @0x000000000a290000[ 0.000000] GIC: using cache flushing for LPI property table[ 0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }[ 0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns[ 0.001881] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)[ 0.002844] pid_max: default: 32768 minimum: 301[ 0.003338] Security Framework initialized[ 0.003726] SELinux:Initializing.[ 0.004162] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)[ 0.004791] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)[ 0.006240] Initializing cgroup subsys memory[ 0.006671] Initializing cgroup subsys freezer[ 0.007997] sched-energy: Sched-energy-costs installed from DT[ 0.008545] CPU0: update cpu_capacity 401[ 0.009002] ASID allocator initialised with 32768 entries[ 0.025832] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created[ 0.027097] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created[ 0.039237] Detected VIPT I-cache on CPU1[ 0.039269] CPU1: found redistributor 1 region 0:0x00000000fef20000[ 0.039303] CPU1: using LPI pending table @0x000000000a3f0000[ 0.039346] CPU1: update cpu_capacity 401[ 0.039350] CPU1: Booted secondary processor [ 0.049219] Detected VIPT I-cache on CPU2[ 0.049238] CPU2: found redistributor 2 region 0:0x00000000fef40000[ 0.049272] CPU2: using LPI pending table @0x000000007c020000[ 0.049300] CPU2: update cpu_capacity 401[ 0.049303] CPU2: Booted secondary processor [ 0.059249] Detected VIPT I-cache on CPU3[ 0.059268] CPU3: found redistributor 3 region 0:0x00000000fef60000[ 0.059301] CPU3: using LPI pending table @0x000000007c060000[ 0.059328] CPU3: update cpu_capacity 401[ 0.059331] CPU3: Booted secondary processor [ 0.069298] Detected PIPT I-cache on CPU4[ 0.069327] CPU4: found redistributor 100 region 0:0x00000000fef80000[ 0.069366] CPU4: using LPI pending table @0x000000007c0b0000[ 0.069407] CPU4: update cpu_capacity 1024[ 0.069410] CPU4: Booted secondary processor [ 0.079324] Detected PIPT I-cache on CPU5[ 0.079342] CPU5: found redistributor 101 region 0:0x00000000fefa0000[ 0.079378] CPU5: using LPI pending table @0x000000007c0e0000[ 0.079407] CPU5: update cpu_capacity 1024[ 0.079410] CPU5: Booted secondary processor [ 0.079493] Brought up 6 CPUs[ 0.091599] SMP: Total of 6 processors activated.[ 0.092041] CPU features: detected feature: GIC system register CPU interface[ 0.092712] CPU: All CPU(s) started at EL2[ 0.093137] alternatives: patching kernel code[ 0.095481] devtmpfs: initialized[ 0.116326] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns[ 0.117283] futex hash table entries: 2048 (order: 5, 131072 bytes)[ 0.118577] pinctrl core: initialized pinctrl subsystem[ 0.120541] Failed to find legacy iommu devices[ 0.121354] NET: Registered protocol family 16[ 0.122196] schedtune: init normalization constants...[ 0.122698] schedtune: CLUSTER min_pwr: 56 max_pwr: 222[ 0.123349] schedtune: CPU min_pwr: 0 max_pwr: 222[ 0.123982] schedtune: CPU min_pwr: 0 max_pwr: 222[ 0.124615] schedtune: CPU min_pwr: 0 max_pwr: 222[ 0.125248] schedtune: CPU min_pwr: 0 max_pwr: 222[ 0.125881] schedtune: CLUSTER min_pwr: 65 max_pwr:1108[ 0.126513] schedtune: CPU min_pwr: 0 max_pwr:1108[ 0.127152] schedtune: CPU min_pwr: 0 max_pwr:1108[ 0.127784] schedtune: SYSTEM min_pwr: 121 max_pwr:4434[ 0.128417] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12[ 0.129156] schedtune: verify normalization constants...[ 0.129671] schedtune: max_pwr/2^0: 4313 => norm_pwr:1024[ 0.130211] schedtune: max_pwr/2^1: 2156 => norm_pwr: 511[ 0.130757] schedtune: max_pwr/2^2: 1078 => norm_pwr: 255[ 0.131296] schedtune: max_pwr/2^3:539 => norm_pwr: 127[ 0.131836] schedtune: max_pwr/2^4:269 => norm_pwr: 63[ 0.132375] schedtune: max_pwr/2^5:134 => norm_pwr: 31[ 0.132915] schedtune: configured to support 5 boost groups[ 0.144134] cpuidle: using governor ladder[ 0.154137] cpuidle: using governor menu[ 0.154535] Registered FIQ tty driver[ 0.155266] vdso: 2 pages (1 code @ ffffff8008b66000, 1 data @ ffffff80091a4000)[ 0.156004] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.[ 0.157401] DMA: preallocated 256 KiB pool for atomic allocations[ 0.178398] console enabled[ 0.179006] pstore: Registered ramoops as persistent store backend[ 0.179609] ramoops: attached 0xf0000@0x110000, ecc: 0/0[ 0.182507] fiq debugger fiq mode enabled[ [ 0.183145] console enabled 0.183145] console enabled[ 0.183828] bootconsole disabled[ 0.183828] bootconsole disabled[ 0.184398] Registered fiq debugger ttyFIQ0[ 0.213706] rockchip-pinctrl pinctrl: pin gpio4-29 already requested by pinctrl; cannot claim for vcc5v0-host-regulator[ 0.213726] rockchip-pinctrl pinctrl: pin-157 (vcc5v0-host-regulator) status -22[ 0.213738] rockchip-pinctrl pinctrl: could not request pin 157 (gpio4-29) from group host-vbus-drvon device rockchip-pinctrl[ 0.213748] reg-fixed-voltage vcc5v0-host-regulator: Error applying setting, reverse things back[ 0.215489] iommu: Adding device ff650000.vpu_service to group 0[ 0.215564] iommu: Adding device ff660000.rkvdec to group 1[ 0.215625] iommu: Adding device ff670000.iep to group 2[ 0.215716] iommu: Adding device ff8f0000.vop to group 3[ 0.215786] iommu: Adding device ff900000.vop to group 4[ 0.215892] iommu: Adding device ff910000.isp to group 5[ 0.215966] iommu: Adding device ff920000.isp to group 6[ 0.216631] rk_iommu ff670800.iommu: can't get aclk[ 0.216646] rk_iommu ff670800.iommu: can't get hclk[ 0.217489] SCSI subsystem initialized[ 0.217663] usbcore: registered new interface driver usbfs[ 0.217714] usbcore: registered new interface driver hub[ 0.217791] usbcore: registered new device driver usb[ 0.218134] media: Linux media interface: v0.10[ 0.218197] Linux video capture interface: v2.00[ 0.218376] pps_core: LinuxPPS API ver. 1 registered[ 0.218386] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>[ 0.218404] PTP clock support registered[ 0.219907] Advanced Linux Sound Architecture Driver Initialized.[ 0.220365] Bluetooth: Core ver 2.21[ 0.220394] NET: Registered protocol family 31[ 0.220402] Bluetooth: HCI device and connection manager initialized[ 0.220415] Bluetooth: HCI socket layer initialized[ 0.220426] Bluetooth: L2CAP socket layer initialized[ 0.220452] Bluetooth: SCO socket layer initialized[ 0.221142] rockchip-cpuinfo cpuinfo: Serial : fb3de255a38d74a4[ 0.221690] clocksource: Switched to clocksource arch_sys_counter[ 0.265187] thermal thermal_zone1: power_allocator: sustainable_power will be estimated[ 0.265424] NET: Registered protocol family 2[ 0.265860] TCP established hash table entries: 16384 (order: 5, 131072 bytes)[ 0.266001] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)[ 0.266275] TCP: Hash tables configured (established 16384 bind 16384)[ 0.266354] UDP hash table entries: 1024 (order: 3, 32768 bytes)[ 0.266412] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)[ 0.266580] NET: Registered protocol family 1[ 0.267439] Trying to unpack rootfs image as initramfs...[ 0.364968] Freeing initrd memory: 1944K[ 0.365618] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available[ 0.365706] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available[ 0.368510] audit: initializing netlink subsys (disabled)[ 0.368575] audit: type=2000 audit(0.366:1): initialized[ 0.373587] VFS: Disk quotas dquot_6.6.0[ 0.373721] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)[ 0.374698] Registering sdcardfs 0.1[ 0.375268] fuse init (API version 7.23)[ 0.376338] [ 0.376338] TEE Core Framework initialization (ver 1:0.1)[ 0.376365] TEE armv7 Driver initialization[ 0.376741] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"[ 0.376758] TEE core: Alloc the misc device "opteearmtz00" (id=0)[ 0.376933] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=61)[ 0.381016] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)[ 0.381038] io scheduler noop registered[ 0.381197] io scheduler cfq registered (default)[ 0.382417] phy phy-ff770000.syscon:usb2-phy@e450.0: Failed to get VBUS supply regulator[ 0.383302] phy phy-ff770000.syscon:usb2-phy@e460.2: Failed to get VBUS supply regulator[ 0.386330] ace test_init function.[ 0.386481] wiegandOut_probe[ 0.386531] wiegandOut_probe gpiod0 41 [ 0.386561] wiegandOut_probe gpiod1 42 [ 0.386591] wiegandOut_probe gpio_mode_switch 49 [ 0.386605] wiegandOut_probe level-effect 1[ 0.386627] wiegandOut_probe, end ret=0 [ 0.386651] ace test_init end.ret=0 [ 0.388463] backlight supply power not found, using dummy regulator[ 0.388828] iep: failed to find iep power down clock source.[ 0.389191] IEP Power ON[ 0.389352] IEP Power OFF[ 0.389427] IEP Driver loaded succesfully[ 0.389552] Module initialized.[ 0.389805] rk-vcodec ff650000.vpu_service: no regulator for vcodec[ 0.390017] rk-vcodec ff650000.vpu_service: probe device[ 0.390060] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc07c2d9c10[ 0.390192] rk-vcodec ff650000.vpu_service: allocator is drm[ 0.390247] rk-vcodec ff650000.vpu_service: checking hw id 0[ 0.390694] rk-vcodec ff650000.vpu_service: could not find power_model node[ 0.390709] rk-vcodec ff650000.vpu_service: init success[ 0.390893] rk-vcodec ff660000.rkvdec: no regulator for vcodec[ 0.391296] rk-vcodec ff660000.rkvdec: probe device[ 0.391340] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc07c2da410[ 0.391498] rk-vcodec ff660000.rkvdec: allocator is drm[ 0.391553] rk-vcodec ff660000.rkvdec: checking hw id 6876[ 0.391918] rk-vcodec ff660000.rkvdec: could not find power_model node[ 0.391932] rk-vcodec ff660000.rkvdec: init success[ 0.393411] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-66 0.393430] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12[ 0.394752] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330[ 0.394765] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16[ 0.396510] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled[ 0.398250] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A[ 0.398690] rockchip-pinctrl pinctrl: pin gpio4-19 already requested by fiq-debugger; cannot claim for ff1a0000.serial[ 0.398707] rockchip-pinctrl pinctrl: pin-147 (ff1a0000.serial) status -22[ 0.398719] rockchip-pinctrl pinctrl: could not request pin 147 (gpio4-19) from group uart2c-xferon device rockchip-pinctrl[ 0.398729] dw-apb-uart ff1a0000.serial: Error applying setting, reverse things back[ 0.399010] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A[ 0.399606] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 38, base_baud = 1500000) is a 16550A[ 0.400173] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 40, base_baud = 1500000) is a 16550A[ 0.400557] Initialized drm 1.1.0 20060810[ 0.404207] Rockchip DRM driver version: v1.0.0[ 0.404534] rockchip-drm display-subsystem: dmc is disabled[ 0.404814] rockchip-vop ff900000.vop: missing rockchip,grf property[ 0.405097] rockchip-vop ff900000.vop: unable to request PWM[ 0.405125] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)[ 0.405169] rockchip-vop ff8f0000.vop: missing rockchip,grf property[ 0.405338] rockchip-vop ff8f0000.vop: unable to request PWM[ 0.405362] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)[ 0.405388] rockchip-drm display-subsystem: failed to bind ff960000.dsi (ops dw_mipi_dsi_ops): -517[ 0.405629] rockchip-drm display-subsystem: master bind failed: -517[ 0.407268] panel_simple: parse lcd-55power: gpio=56, atv_val=1, delay=6ms[ 0.407277] panel_simple: parse lcd-rst: gpio=92, atv_val=1, delay=6ms[ 0.407319] ff960000.dsi.0 supply power not found, using dummy regulator[ 0.407996] mali ff9a0000.gpu: Failed to get regulator[ 0.408023] mali ff9a0000.gpu: Power control initialization failed[ 0.408372] Unable to detect cache hierarchy for CPU 0[ 0.419711] brd: module loaded[ 0.427901] loop: module loaded[ 0.428461] zram: Added device: zram0[ 0.432716] SCSI Media Changer driver v0.25 [ 0.433325] register spi return v = :0[ 0.433363] register firefly_spi_init spi return v = :0[ 0.433420] tun: Universal TUN/TAP device driver, 1.6[ 0.433431] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>[ 0.434407] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.[ 0.434501] rk_gmac-dwmac fe300000.ethernet: clock input or output? (output).[ 0.434517] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).[ 0.434528] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).[ 0.434552] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).[ 0.434781] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed[ 0.439815] rk_gmac-dwmac fe300000.ethernet: init for RMII[ 0.439940] stmmac - user ID: 0x10, Synopsys ID: 0x35[ 0.439950]Ring mode enabled[ 0.439958]DMA HW capability register supported[ 0.439964]Normal descriptors[ 0.439974]RX Checksum Offload Engine supported (type 2)[ 0.439981]Wake-Up On Lan supported[ 0.440023]Enable RX Mitigation via HW Watchdog Timer[ 0.508041] libphy: stmmac: probed[ 0.508090] eth%d: PHY ID 001cc816 at 0 IRQ POLL (stmmac-0:00) active[ 0.508104] eth%d: PHY ID 001cc816 at 1 IRQ POLL (stmmac-0:01)[ 0.509692] PPP generic driver version 2.4.2[ 0.509934] PPP BSD Compression module registered[ 0.509960] PPP Deflate Compression module registered[ 0.510005] PPP MPPE Compression module registered[ 0.510030] NET: Registered protocol family 24[ 0.510094] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).[ 0.510103] CSLIP: code copyright 1989 Regents of the University of California.[ 0.510123] Rockchip WiFi SYS interface (V1.00) ... [ 0.510255] usbcore: registered new interface driver catc[ 0.510321] usbcore: registered new interface driver kaweth[ 0.510340] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver[ 0.510391] usbcore: registered new interface driver pegasus[ 0.510452] usbcore: registered new interface driver rtl8150[ 0.510513] usbcore: registered new interface driver r8152[ 0.510530] hso: drivers/net/usb/hso.c: Option Wireless[ 0.510600] usbcore: registered new interface driver hso[ 0.510666] usbcore: registered new interface driver asix[ 0.510732] usbcore: registered new interface driver ax88179_178a[ 0.510787] usbcore: registered new interface driver cdc_ether[ 0.510841] usbcore: registered new interface driver cdc_eem[ 0.510900] usbcore: registered new interface driver dm9601[ 0.510973] usbcore: registered new interface driver smsc75xx[ 0.511042] usbcore: registered new interface driver smsc95xx[ 0.511100] usbcore: registered new interface driver gl620a[ 0.511157] usbcore: registered new interface driver net1080[ 0.511218] usbcore: registered new interface driver plusb[ 0.511273] usbcore: registered new interface driver rndis_host[ 0.511337] usbcore: registered new interface driver cdc_subset[ 0.511403] usbcore: registered new interface driver zaurus[ 0.511462] usbcore: registered new interface driver MOSCHIP usb-ethernet driver[ 0.511543] usbcore: registered new interface driver int51x1[ 0.511601] usbcore: registered new interface driver kalmia[ 0.511663] usbcore: registered new interface driver ipheth[ 0.511751] usbcore: registered new interface driver sierra_net[ 0.511813] usbcore: registered new interface driver cx82310_eth[ 0.511885] usbcore: registered new interface driver cdc_ncm[ 0.511940] usbcore: registered new interface driver qmi_wwan[ 0.511998] usbcore: registered new interface driver cdc_mbim[ 0.519194] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd[ 0.524889] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd[ 0.526141] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver[ 0.526190] ehci-pci: EHCI PCI platform driver[ 0.526309] ehci-platform: EHCI generic platform driver[ 0.530081] ehci-platform fe380000.usb: EHCI Host Controller[ 0.530410] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1[ 0.530675] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000[ 0.538395] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00[ 0.538636] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002[ 0.538684] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.538697] usb usb1: Product: EHCI Host Controller[ 0.538746] usb usb1: Manufacturer: Linux 4.4.126 ehci_hcd[ 0.538758] usb usb1: SerialNumber: fe380000.usb[ 0.539408] hub 1-0:1.0: USB hub found[ 0.539488] hub 1-0:1.0: 1 port detected[ 0.543701] ehci-platform fe3c0000.usb: EHCI Host Controller[ 0.544057] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2[ 0.544550] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000[ 0.551707] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00[ 0.551925] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002[ 0.551962] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.551975] usb usb2: Product: EHCI Host Controller[ 0.551987] usb usb2: Manufacturer: Linux 4.4.126 ehci_hcd[ 0.551999] usb usb2: SerialNumber: fe3c0000.usb[ 0.552575] hub 2-0:1.0: USB hub found[ 0.552636] hub 2-0:1.0: 1 port detected[ 0.553526] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver[ 0.553565] ohci-platform: OHCI generic platform driver[ 0.554007] ohci-platform fe3a0000.usb: Generic Platform OHCI controller[ 0.554271] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3[ 0.554437] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000[ 0.609244] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001[ 0.609338] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.609561] usb usb3: Product: Generic Platform OHCI controller[ 0.609785] usb usb3: Manufacturer: Linux 4.4.126 ohci_hcd[ 0.610011] usb usb3: SerialNumber: fe3a0000.usb[ 0.610907] hub 3-0:1.0: USB hub found[ 0.611004] hub 3-0:1.0: 1 port detected[ 0.612000] ohci-platform fe3e0000.usb: Generic Platform OHCI controller[ 0.612489] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4[ 0.612864] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000[ 0.669216] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001[ 0.669307] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 0.669530] usb usb4: Product: Generic Platform OHCI controller[ 0.669753] usb usb4: Manufacturer: Linux 4.4.126 ohci_hcd[ 0.669979] usb usb4: SerialNumber: fe3e0000.usb[ 0.670854] hub 4-0:1.0: USB hub found[ 0.670962] hub 4-0:1.0: 1 port detected[ 0.672681] usbcore: registered new interface driver cdc_acm[ 0.672761] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters[ 0.673030] usbcore: registered new interface driver usblp[ 0.673216] usbcore: registered new interface driver cdc_wdm[ 0.673485] usbcore: registered new interface driver uas[ 0.673769] usbcore: registered new interface driver usb-storage[ 0.673919] usbcore: registered new interface driver ums-alauda[ 0.674143] usbcore: registered new interface driver ums-cypress[ 0.674370] usbcore: registered new interface driver ums-datafab[ 0.674595] usbcore: registered new interface driver ums_eneub6250[ 0.674818] usbcore: registered new interface driver ums-freecom[ 0.675073] usbcore: registered new interface driver ums-isd200[ 0.675271] usbcore: registered new interface driver ums-jumpshot[ 0.675494] usbcore: registered new interface driver ums-karma[ 0.675720] usbcore: registered new interface driver ums-onetouch[ 0.675945] usbcore: registered new interface driver ums-sddr09[ 0.676168] usbcore: registered new interface driver ums-sddr55[ 0.676392] usbcore: registered new interface driver ums-usbat[ 0.676670] usbcore: registered new interface driver usbserial[ 0.676840] usbcore: registered new interface driver usbserial_generic[ 0.677052] usbserial: USB Serial support registered for generic[ 0.677297] usbcore: registered new interface driver option[ 0.677500] usbserial: USB Serial support registered for GSM modem (1-port)[ 0.677999] usbcore: registered new interface driver trancevibrator[ 0.678180] usb20_otg: version 3.10a 21-DEC-2012[ 0.678722] usb20_host: version 3.10a 21-DEC-2012[ 0.679649] usbcore: registered new interface driver xpad[ 0.679762] usbcore: registered new interface driver usb_acecad[ 0.679858] usbcore: registered new interface driver aiptek[ 0.679921] usbcore: registered new interface driver gtco[ 0.679987] usbcore: registered new interface driver hanwang[ 0.680080] usbcore: registered new interface driver kbtab[ 0.680815] .. rk pwm remotectl v1.1 init[ 0.681155] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0[ 0.681599] sensor_register_slave:mma8452,id=17[ 0.681616] sensor_register_slave:lis3dh,id=7[ 0.681629] sensor_register_slave:mma7660,id=18[ 0.681646] sensor_register_slave:lsm303d,id=22[ 0.681658] sensor_register_slave:gs_mc3230,id=23[ 0.681666] gsensor_init[ 0.681695] sensor_register_slave:mpu6880_acc,id=24[ 0.681709] sensor_register_slave:mpu6500_acc,id=25[ 0.681721] sensor_register_slave:lsm330_acc,id=26[ 0.681732] sensor_register_slave:bma2xx_acc,id=27[ 0.681745] sensor_register_slave:akm8975,id=30[ 0.681757] sensor_register_slave:akm8963,id=31[ 0.681769] sensor_register_slave:l3g4200d,id=45[ 0.681781] sensor_register_slave:l3g20d,id=46[ 0.681792] sensor_register_slave:ewtsa,id=47[ 0.681804] sensor_register_slave:lsm330_gyro,id=51[ 0.681816] sensor_register_slave:cm3217,id=53[ 0.681828] sensor_register_slave:cm3218,id=54[ 0.681839] sensor_register_slave:ls_stk3410,id=62[ 0.681851] sensor_register_slave:ps_stk3410,id=67[ 0.682642] i2c /dev entries driver[ 0.683937] fan53555-regulator 0-0040: FAN53555 Option Rev Detected![ 0.684079] fan53555-reg: supplied by vcc5v0_sys[ 0.686677] fan53555-regulator 0-0041: FAN53555 Option Rev Detected![ 0.686785] fan53555-reg: supplied by vcc5v0_sys[ 0.688979] rockchip-pinctrl pinctrl: pin gpio1-18 already requested by 0-0040; cannot claim for 0-001b[ 0.688998] rockchip-pinctrl pinctrl: pin-50 (0-001b) status -22[ 0.689015] rockchip-pinctrl pinctrl: could not request pin 50 (gpio1-18) from group pmic-dvs2on device rockchip-pinctrl[ 0.689028] rk808 0-001b: Error applying setting, reverse things back[ 0.689512] rk808 0-001b: Pmic Chip id: 0x0[ 0.692823] rk808-regulator rk808-regulator: there is no dvs0 gpio[ 0.692937] rk808-regulator rk808-regulator: there is no dvs1 gpio[ 0.693094] DCDC_REG1: supplied by vcc3v3_sys[ 0.693923] DCDC_REG2: supplied by vcc3v3_sys[ 0.694546] DCDC_REG3: supplied by vcc3v3_sys[ 0.694907] DCDC_REG4: supplied by vcc3v3_sys[ 0.695451] LDO_REG1: supplied by vcc3v3_sys[ 0.696708] LDO_REG2: supplied by vcc3v3_sys[ 0.697772] LDO_REG3: supplied by vcc3v3_sys[ 0.698878] LDO_REG4: supplied by vcc3v3_sys[ 0.699998] LDO_REG5: supplied by vcc3v3_sys[ 0.701063] LDO_REG6: supplied by vcc3v3_sys[ 0.702118] LDO_REG7: supplied by vcc3v3_sys[ 0.703226] LDO_REG8: supplied by vcc3v3_sys[ 0.704295] SWITCH_REG1: supplied by vcc3v3_sys[ 0.704672] SWITCH_REG2: supplied by vcc3v3_sys[ 0.708456] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0[ 0.709041] rk808 0-001b: Can not read property pmic,stby-gpio[ 0.709119] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80097e2000[ 0.709944] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80097e4000[ 0.710775] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80097e6000[ 0.711641] goodix_ts_probe() start[ 0.711716] 4-005d supply tp not found, using dummy regulator[ 0.849949] input: goodix-ts as /devices/platform/ff3d0000.i2c/i2c-4/4-005d/input/input1[ 0.850485] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80097e8000[ 0.851869] IR NEC protocol handler initialized[ 0.851900] IR RC5(x/sz) protocol handler initialized[ 0.851919] IR RC6 protocol handler initialized[ 0.851937] IR JVC protocol handler initialized[ 0.851954] IR Sony protocol handler initialized[ 0.851972] IR SANYO protocol handler initialized[ 0.851988] IR Sharp protocol handler initialized[ 0.852004] IR MCE Keyboard/mouse protocol handler initialized[ 0.852019] IR XMP protocol handler initialized[ 0.852360] usbcore: registered new interface driver uvcvideo[ 0.852392] USB Video Class driver (1.1.1)[ 0.852415] CamSys driver version: v0.41.0, CamSys head file version: v1.0.0[ 0.858302] __power_supply_register: Expected proper parent device for 'test_ac'[ 0.858548] __power_supply_register: Expected proper parent device for 'test_battery'[ 0.858920] thermal thermal_zone2: power_allocator: sustainable_power will be estimated[ 0.859059] __power_supply_register: Expected proper parent device for 'test_usb'[ 0.862395] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647[ 0.863790] pc9202: sw2001_read(0x1) return 0x1[ 0.863834] status=0x1[ 0.863843] ====== i2c detect success watchdog init========[ 0.864287] device-mapper: uevent: version 1.0.3[ 0.864690] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com[ 0.864947] Bluetooth: HCI UART driver ver 2.3[ 0.864967] Bluetooth: HCI UART protocol H4 registered[ 0.864977] Bluetooth: HCI UART protocol LL registered[ 0.864991] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x[ 0.864999] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2[ 0.865008] rtk_btusb: Register usb char device interface for BT driver[ 0.865340] usbcore: registered new interface driver rtk_btusb[ 0.866021] cpu cpu0: leakage=26[ 0.878396] cpu cpu0: temp=48125, pvtm=155529 (155067 + 462)[ 0.878857] cpu cpu0: pvtm-volt-sel=3[ 0.879507] cpu cpu4: leakage=46[ 0.891651] cpu cpu4: temp=48125, pvtm=163981 (163736 + 245)[ 0.891861] cpu cpu4: pvtm-volt-sel=3[ 0.893476] cpu cpu0: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0[ 0.895334] cpu cpu4: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0[ 0.897798] sdhci: Secure Digital Host Controller Interface driver[ 0.897845] sdhci: Copyright(c) Pierre Ossman[ 0.897864] Synopsys Designware Multimedia Card Interface Driver[ 0.899100] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.[ 0.899286] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.[ 0.899338] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a[ 0.899404] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo[ 0.899457] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.[ 0.899513] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found[ 0.899525] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found[ 0.900590] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.[ 0.900691] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.[ 0.900741] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a[ 0.900791] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo[ 0.900814] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.[ 0.901883] sdhci-pltfm: SDHCI platform and OF driver helper[ 0.903886] sdhci-arasan fe330000.sdhci: No vmmc regulator found[ 0.903933] sdhci-arasan fe330000.sdhci: No vqmmc regulator found[ 0.931801] mmc0: SDHCI controller on fe330000.sdhci using ADMA[ 0.933782] hidraw: raw HID events driver (C) Jiri Kosina[ 0.938506] usbcore: registered new interface driver usbhid[ 0.938531] usbhid: USB HID core driver[ 0.938723] inv_mpu_iio: inv_mpu_init:746[ 0.939579] ashmem: initialized[ 0.945921] rknandbase v1.1 2016-11-08[ 0.946892] usbcore: registered new interface driver snd-usb-audio[ 0.948418] ES8323 1-0010: i2c recv Failed[ 0.954429] u32 classifier[ 0.954490] Actions configured[ 0.954555] Netfilter messages via NETLINK v0.30.[ 0.954651] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)[ 0.955210] ctnetlink v0.93: registering with nfnetlink.[ 0.956298] xt_time: kernel timezone is -0000[ 0.957246] ip_tables: (C) 2000-2006 Netfilter Core Team[ 0.957571] arp_tables: (C) 2002 David S. Miller[ 0.958050] Initializing XFRM netlink socket[ 0.958693] NET: Registered protocol family 10[ 0.959886] mip6: Mobile IPv6[ 0.959936] ip6_tables: (C) 2000-2006 Netfilter Core Team[ 0.961361] sit: IPv6 over IPv4 tunneling driver[ 0.962016] NET: Registered protocol family 17[ 0.962086] NET: Registered protocol family 15[ 0.962139] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.[ 0.962897] Bridge firewalling registered[ 0.962947] Ebtables v2.0 registered[ 0.963253] Bluetooth: RFCOMM TTY layer initialized[ 0.963283] Bluetooth: RFCOMM socket layer initialized[ 0.963319] Bluetooth: RFCOMM ver 1.11[ 0.963344] Bluetooth: BNEP (Ethernet Emulation) ver 1.3[ 0.963353] Bluetooth: BNEP filters: protocol multicast[ 0.963368] Bluetooth: BNEP socket layer initialized[ 0.963384] Bluetooth: HIDP (Human Interface Emulation) ver 1.2[ 0.963398] Bluetooth: HIDP socket layer initialized[ 0.963448] l2tp_core: L2TP core driver, V2.0[ 0.963481] l2tp_ppp: PPPoL2TP kernel driver, V2.0[ 0.963499] : Enter rfkill_wlan_init[ 0.964015] : Enter rfkill_wlan_probe[ 0.964116] : wlan_platdata_parse_dt: wifi_chip_type = ap6181[ 0.964128] : wlan_platdata_parse_dt: enable wifi power control.[ 0.964137] : wlan_platdata_parse_dt: wifi power controled by gpio.[ 0.964260] : wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.[ 0.964269] : rfkill_wlan_probe: init gpio[ 0.964282] : Exit rfkill_wlan_probe[ 0.964357] : Enter rfkill_rk_init[ 0.964787] sensor_register_slave:mpu6500_gyro,id=49[ 0.964811] sensor_register_slave:mpu6880_gyro,id=50[ 0.966374] Registered cp15_barrier emulation handler[ 0.966407] Registered setend emulation handler[ 0.967118] registered taskstats version 1[ 0.967795] rockchip ion idev is NULL[ 0.967814] rga2 ff680000.rga: rga ion client create success![ 0.967952] rga: Driver loaded successfully ver:3.02[ 0.968956] Rockchip DRM driver version: v1.0.0[ 0.969286] rockchip-drm display-subsystem: dmc is disabled[ 0.969604] rockchip-vop ff900000.vop: missing rockchip,grf property[ 0.969852] rockchip-vop ff900000.vop: unable to request PWM[ 0.969882] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)[ 0.969924] rockchip-vop ff8f0000.vop: missing rockchip,grf property[ 0.970082] rockchip-vop ff8f0000.vop: unable to request PWM[ 0.970102] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)[ 0.970177] rockchip-drm display-subsystem: bound ff960000.dsi (ops dw_mipi_dsi_ops)[ 0.970698] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports[ 0.970745] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver[ 0.970867] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)[ 0.972742] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)[ 0.972769] Supports vblank timestamp caching Rev 2 (21.10.2013).[ 0.972777] No driver support for vblank timestamp query.[ 0.973159] rockchip-drm display-subsystem: failed to parse loader memory[ 0.978774] rockchip-drm display-subsystem: fb0:frame buffer device[ 0.979298] mmc0: MAN_BKOPS_EN bit is not set[ 0.992093] mmc0: new HS400 Enhanced strobe MMC card at address 0001[ 0.996516] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB [ 0.996972] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB[ 0.997396] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB[ 0.997633] mali ff9a0000.gpu: leakage=35[ 0.997705] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB[ 0.998242] uboot: 0x000400000 -- 0x000800000 (4 MB)[ 0.998260] trust: 0x000800000 -- 0x000c00000 (4 MB)[ 0.998271] misc: 0x000c00000 -- 0x001000000 (4 MB)[ 0.998280] resource: 0x001000000 -- 0x002000000 (16 MB)[ 0.998289] kernel: 0x002000000 -- 0x003800000 (24 MB)[ 0.998307] boot: 0x003800000 -- 0x005800000 (32 MB)[ 0.998315] recovery: 0x005800000 -- 0x009800000 (64 MB)[ 0.998324] backup: 0x009800000 -- 0x010800000 (112 MB)[ 0.998333] cache: 0x010800000 -- 0x018800000 (128 MB)[ 0.998342] system: 0x018800000 -- 0x078800000 (1536 MB)[ 0.998387] oem: 0x078800000 -- 0x098800000 (512 MB)[ 0.998396] metadata: 0x098800000 -- 0x099800000 (16 MB)[ 0.998405] verity_mode: 0x099800000 -- 0x099808000 (0 MB)[ 0.998414] reserved: 0x099808000 -- 0x099c08000 (4 MB)[ 0.998423] frp: 0x099c08000 -- 0x099c88000 (0 MB)[ 0.998432] userdata: 0x099c88000 -- 0x3a3a00000 (12445 MB)[ 0.998504]mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16[ 1.011275] mali ff9a0000.gpu: temp=46250, pvtm=128198 (128138 + 60)[ 1.012594] mali ff9a0000.gpu: pvtm-volt-sel=2[ 1.014134] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0[ 1.015986] mali ff9a0000.gpu: l=10000 h=2147483647 hyst=5000 l_limit=0 h_limit=0[ 1.016253] I : : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; : 307; : kbase_devfreq_init(); success initing power_model_simple.[ 1.016990] mali ff9a0000.gpu: Probed as mali0[ 1.022092] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller[ 1.022345] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5[ 1.022604] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010[ 1.022665] xhci-hcd xhci-hcd.10.auto: irq 235, io mem 0xfe800000[ 1.022832] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002[ 1.022847] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.022860] usb usb5: Product: xHCI Host Controller[ 1.022871] usb usb5: Manufacturer: Linux 4.4.126 xhci-hcd[ 1.022880] usb usb5: SerialNumber: xhci-hcd.10.auto[ 1.023392] hub 5-0:1.0: USB hub found[ 1.023437] hub 5-0:1.0: 1 port detected[ 1.023721] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller[ 1.023886] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6[ 1.023957] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.[ 1.024064] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003[ 1.024081] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.024092] usb usb6: Product: xHCI Host Controller[ 1.024101] usb usb6: Manufacturer: Linux 4.4.126 xhci-hcd[ 1.024111] usb usb6: SerialNumber: xhci-hcd.10.auto[ 1.024539] hub 6-0:1.0: USB hub found[ 1.024588] hub 6-0:1.0: 1 port detected[ 1.026178] xhci-hcd xhci-hcd.10.auto: remove, state 1[ 1.026228] usb usb6: USB disconnect, device number 1[ 1.050058] xhci-hcd xhci-hcd.10.auto: Host not halted after 16000 microseconds.[ 1.050070] xhci-hcd xhci-hcd.10.auto: Host controller not halted, aborting reset.[ 1.050203] xhci-hcd xhci-hcd.10.auto: USB bus 6 deregistered[ 1.050550] xhci-hcd xhci-hcd.10.auto: remove, state 1[ 1.050654] usb usb5: USB disconnect, device number 1[ 1.051294] xhci-hcd xhci-hcd.10.auto: USB bus 5 deregistered[ 1.056228] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller[ 1.056471] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 5[ 1.056719] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010[ 1.056812] xhci-hcd xhci-hcd.11.auto: irq 236, io mem 0xfe900000[ 1.057126] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002[ 1.057218] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.057441] usb usb5: Product: xHCI Host Controller[ 1.057663] usb usb5: Manufacturer: Linux 4.4.126 xhci-hcd[ 1.057886] usb usb5: SerialNumber: xhci-hcd.11.auto[ 1.058580] hub 5-0:1.0: USB hub found[ 1.058651] hub 5-0:1.0: 1 port detected[ 1.059132] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller[ 1.059452] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 6[ 1.059592] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.[ 1.059844] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003[ 1.059991] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.060214] usb usb6: Product: xHCI Host Controller[ 1.060437] usb usb6: Manufacturer: Linux 4.4.126 xhci-hcd[ 1.060659] usb usb6: SerialNumber: xhci-hcd.11.auto[ 1.061292] hub 6-0:1.0: USB hub found[ 1.061375] hub 6-0:1.0: 1 port detected[ 1.063193] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.[ 1.063437] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.[ 1.063579] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a[ 1.063821] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo[ 1.064034] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.[ 1.064280] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found[ 1.064464] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found[ 1.065079] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq[ 1.078486] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)[ 1.091781] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized[ 1.092919] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.[ 1.093029] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.[ 1.093058] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a[ 1.093090] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo[ 1.093112] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.[ 1.093632] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq[ 1.094834] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done[ 1.094862] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done[ 1.094880] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done[ 1.094890] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done[ 1.105106] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)[ 1.107817] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)[ 1.109358] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)[ 1.110896] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)[ 1.113641] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)[ 1.116980] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)[ 1.119865] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized[ 1.121872] i2c i2c-2: sensor_probe: gs_mc3230,ffffffc07b6e6400[ 1.122029] sensors 2-004c: sensor_chip_init:gs_mc3230:devid=0x0,ops=0xffffff8009266140[ 1.152166] init_3230_ctl_data 445 : error: -6[ 1.152259] sensors 2-004c: sensor_initial:fail to init sensor[ 1.152286] sensors 2-004c: sensor_chip_init:fail to init sensor[ 1.152312] i2c i2c-2: sensor_probe failed -2[ 1.152312] [ 1.152431] sensors: probe of 2-004c failed with error -2[ 1.153442] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:57:21 UTC (1358499441)[ 1.156255] It doesn't contain Rogue gpu[ 1.192401] ret 1024[ 1.193001] I : : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; : 417; : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-8856fe9', rk_ko_ver is '5', built at '12:01:06', on 'May9 2020'.[ 1.193453] Mali: Mali device driver loaded[ 1.194053] input: rk29-keypad as /devices/platform/rockchip-key/input/input2[ 1.195079] ALSA device list:[ 1.195121] No soundcards found.[ 1.195749] Freeing unused kernel memory: 832K[ 1.198768] init: init first stage started![ 1.200546] init: init second stage started![ 1.203364] init: Setting ro.rk.soc=rk3399[ 1.203498] init: OK,EMMC DRIVERS INIT OK[ 1.203547] init: property_set("ro.boot.mode", "emmc") failed[ 1.203617] init: property_set("ro.hardware", "rk30board") failed[ 1.203767] init: Running restorecon...[ 1.203958] init: waitpid failed: No child processes[ 1.204378] init: (Loading properties from /default.prop took 0.00s.)[ 1.206859] init: (Parsing /init.environ.rc took 0.00s.)[ 1.207421] init: (Parsing /init.usb.rc took 0.00s.)[ 1.208657] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)[ 1.208937] init: (Parsing init.rk30board.bootmode.emmc.rc took 0.00s.)[ 1.210738] mmc1: new high speed SDIO card at address 0001[ 1.210785] init: (Parsing init.rk30board.usb.rc took 0.00s.)[ 1.210857] init: (Parsing init.rk30board.environment.rc took 0.00s.)[ 1.210964] init: could not import file '/init.stt_trace.rc' from '/init.debug.rc': No such file or directory[ 1.211197] init: (Parsing /init.logs.rc took 0.00s.)[ 1.211317] init: (Parsing /init.crashlogd.rc took 0.00s.)[ 1.211426] init: (Parsing /init.coredump.rc took 0.00s.)[ 1.211494] init: (Parsing /init.log-watch.rc took 0.00s.)[ 1.211577] init: (Parsing /init.kernel.rc took 0.00s.)[ 1.211737] init: (Parsing /init.debug-charging.rc took 0.00s.)[ 1.211761] init: (Parsing /init.debug.rc took 0.00s.)[ 1.211796] init: (Parsing init.rockchip.rc took 0.00s.)[ 1.212357] init: (Parsing init.connectivity.rc took 0.00s.)[ 1.212424] init: could not import file 'init.box.samba.rc' from '/init.rk30board.rc': No such file or directory[ 1.212586] init: (Parsing init.rk3399.rc took 0.00s.)[ 1.212713] init: init.tablet.rc: 23: invalid keyword 'ioprio'[ 1.212791] init: (Parsing init.tablet.rc took 0.00s.)[ 1.212828] init: could not import file 'init.car.rc' from '/init.rk30board.rc': No such file or directory[ 1.212870] init: could not import file 'init.optee.rc' from '/init.rk30board.rc': No such file or directory[ 1.212895] init: (Parsing /init.rk30board.rc took 0.01s.)[ 1.213771] init: (Parsing /init.usb.configfs.rc took 0.00s.)[ 1.213911] init: (Parsing /init.zygote64_32.rc took 0.00s.)[ 1.213946] init: (Parsing /init.rc took 0.01s.)[ 1.214351] init: Starting service 'ueventd'...[ 1.216288] init: write_file: Unable to open '/proc/self/coredump_filter': No such file or directory[ 1.216365] init: write_file: Unable to open '/proc/sys/kernel/panic_on_stackoverflow': No such file or directory[ 1.216403] init: Waiting for /dev/.coldboot_done...[ 1.219143] ueventd: ueventd started![ 1.220933] ueventd: invalid gid 'trace'[ 1.386009] ueventd: Coldboot took 0.16s.[ 1.389782] init: Waiting for /dev/.coldboot_done took 0.17s.[ 1.389989] init: /dev/hw_random not found[ 1.392009] keychord: using input dev ff420030.pwm for fevent[ 1.392104] keychord: using input dev rk29-keypad for fevent[ 1.403994] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory[ 1.417128] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: (null)[ 1.417292] Registered swp emulation handler[ 1.417573] init: write_file: Unable to open '/sys/module/rockchip_pm/parameters/policy': No such file or directory[ 1.418238] fs_mgr: Warning: unknown flag resize[ 1.418536] init: /dev/hw_random not found[ 1.419449] fs_mgr: Warning: unknown flag resize[ 1.423821] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc[ 1.423865] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/system,target=/system,type=ext4)=0[ 1.425360] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/cache,/cache,ext4)=-1: No such file or directory[ 1.425973] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/cache[ 1.435602] random: e2fsck: uninitialized urandom read (40 bytes read, 24 bits of entropy available)[ 1.500865] vendor storage:20160801 ret = 0[ 1.527955] e2fsck: e2fsck 1.42.9 (28-Dec-2013)[ 1.527955] [ 1.528138] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/cache: recovering journal[ 1.528138] [ 1.528249] e2fsck: Setting free inodes count to 8159 (was 8160)[ 1.528249] [ 1.528293] e2fsck: Setting free blocks count to 31078 (was 31080)[ 1.528293] [ 1.528337] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/cache: clean, 33/8192 files, 1690/32768 blocks[ 1.528337] [ 1.535228] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard[ 1.535390] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/cache,target=/cache,type=ext4)=0[ 1.537528] EXT4-fs (mmcblk0p12): Ignoring removed nomblk_io_submit option[ 1.544773] EXT4-fs (mmcblk0p12): recovery complete[ 1.545425] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit[ 1.545584] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/metadata,/metadata,ext4)=0: Success[ 1.562630] fs_mgr: check_fs(): unmount(/metadata) succeeded[ 1.562794] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/metadata[ 1.566157] random: e2fsck: uninitialized urandom read (40 bytes read, 34 bits of entropy available)[ 1.599339] e2fsck: e2fsck 1.42.9 (28-Dec-2013)[ 1.599339] [ 1.599484] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/metadata has been mounted 10 times without being checked, check forced.[ 1.599484] [ 1.599581] e2fsck: Pass 1: Checking inodes, blocks, and sizes[ 1.599581] [ 1.599624] e2fsck: Pass 2: Checking directory structure[ 1.599624] [ 1.599665] e2fsck: Pass 3: Checking directory connectivity[ 1.599665] [ 1.599705] e2fsck: Pass 4: Checking reference counts[ 1.599705] [ 1.599788] e2fsck: Pass 5: Checking group summary information[ 1.599788] [ 1.599832] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/metadata: 12/1024 files (8.3% non-contiguous), 1105/4096 blocks[ 1.599832] [ 1.604724] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard[ 1.604802] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/metadata,target=/metadata,type=ext4)=0[ 1.605077] fs_mgr: Running /system/bin/fsck.f2fs -a /dev/block/platform/fe330000.sdhci/by-name/userdata[ 1.608311] random: fsck.f2fs: uninitialized urandom read (40 bytes read, 35 bits of entropy available)[ 1.634282] fsck.f2fs: Info: Fix the reported corruption.[ 1.634282] [ 1.634351] fsck.f2fs: c->start_sector=0[ 1.634351] [ 1.634371] fsck.f2fs: Info: Segments per section = 1[ 1.634371] [ 1.634388] fsck.f2fs: Info: Sections per zone = 1[ 1.634388] [ 1.634404] fsck.f2fs: Info: sector size = 512[ 1.634404] [ 1.634421] fsck.f2fs: Info: total sectors = 25488320 (12445 MB)[ 1.634421] [ 1.634438] fsck.f2fs: Can't find a valid F2FS superblock at 0x0[ 1.634438] [ 1.634455] fsck.f2fs: Can't find a valid F2FS superblock at 0x1[ 1.634455] [ 1.634477] fsck.f2fs: fsck.f2fs terminated by exit(255)[ 1.634477] [ 1.637975] F2FS-fs (mmcblk0p16): Magic Mismatch, valid(0xf2f52010) - read(0x58a9f6ea)[ 1.638052] F2FS-fs (mmcblk0p16): Can't find valid F2FS filesystem in 1th superblock[ 1.638402] F2FS-fs (mmcblk0p16): Magic Mismatch, valid(0xf2f52010) - read(0xf21daaad)[ 1.638427] F2FS-fs (mmcblk0p16): Can't find valid F2FS filesystem in 2th superblock[ 1.638501] F2FS-fs (mmcblk0p16): Magic Mismatch, valid(0xf2f52010) - read(0x58a9f6ea)[ 1.638576] F2FS-fs (mmcblk0p16): Can't find valid F2FS filesystem in 1th superblock[ 1.638599] F2FS-fs (mmcblk0p16): Magic Mismatch, valid(0xf2f52010) - read(0xf21daaad)[ 1.638618] F2FS-fs (mmcblk0p16): Can't find valid F2FS filesystem in 2th superblock[ 1.638866] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/userdata,target=/data,type=f2fs)=-1[ 1.639603] fs_mgr: fs_mgr_mount_all(): possibly an encryptable blkdev /dev/block/platform/fe330000.sdhci/by-name/userdata for mount /data type f2fs )[ 1.645058] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)[ 1.645512] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)[ 1.645897] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)[ 1.646359] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)[ 1.646758] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)[ 1.647116] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)[ 1.647496] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)[ 1.647886] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)[ 1.648592] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)[ 1.649153] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)[ 1.649742] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)[ 1.650281] init: (Parsing /system/etc/init/installd.rc took 0.00s.)[ 1.650824] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)[ 1.651564] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)[ 1.652998] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)[ 1.653825] init: (Parsing /system/etc/init/logd.rc took 0.00s.)[ 1.654421] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)[ 1.655001] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)[ 1.655625] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)[ 1.656250] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)[ 1.656826] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)[ 1.657422] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)[ 1.658033] init: (Parsing /system/etc/init/netd.rc took 0.00s.)[ 1.658662] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)[ 1.659245] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)[ 1.659905] init: ignored duplicate definition of service 'ril-daemon'init: (Parsing /system/etc/init/rild.rc took 0.00s.)[ 1.660602] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)[ 1.661204] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)[ 1.661930] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)[ 1.662574] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)[ 1.663211] init: (Parsing /system/etc/init/vold.rc took 0.00s.)[ 1.664427] init: Starting service 'logd'...[ 1.669776] init: insmod: open("/system/lib/modules/ump.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/mali.ko") failed: No such file or directory[ 1.680636] random: logd: uninitialized urandom read (40 bytes read, 37 bits of entropy available)[ 1.746771] midgard_kbase: disagrees about version of symbol devfreq_cooling_unregister[ 1.746853] midgard_kbase: Unknown symbol devfreq_cooling_unregister (err -22)[ 1.746957] midgard_kbase: disagrees about version of symbol of_devfreq_cooling_register_power[ 1.746997] midgard_kbase: Unknown symbol of_devfreq_cooling_register_power (err -22)[ 1.748624] midgard_kbase: Unknown symbol rockchip_of_get_lkg_volt_sel (err 0)[ 1.748777] midgard_kbase: Unknown symbol rockchip_of_get_pvtm_volt_sel (err 0)[ 1.748841] midgard_kbase: disagrees about version of symbol thermal_zone_get_zone_by_name[ 1.748852] midgard_kbase: Unknown symbol thermal_zone_get_zone_by_name (err -22)[ 1.759107] logd.auditd: start[ 1.759185] logd.klogd: 1757494402[ 1.771130] init: finit_module for "/system/lib/modules/mali_kbase.ko" failed: Invalid argumentinit: insmod: open("/system/lib/modules/rk30_mirroring.ko") failed: No such file or directoryinit: finit_module for "/system/lib/modules/rk29-ipp.ko" failed: Exec format errorinit: insmod: open("/system/lib/modules/pvrsrvkm.ko") failed: No such file or directoryinit: finit_module for "/drmboot.ko" failed: Exec format errorfs_mgr: Warning: unknown flag resize[ 1.774435] zram0: detected capacity change from 0 to 533413888[ 1.778675] random: mkswap: uninitialized urandom read (40 bytes read, 38 bits of entropy available)[ 1.795456] random: mkswap: uninitialized urandom read (16 bytes read, 38 bits of entropy available)[ 1.797876] Adding 520908k swap on /dev/block/zram0.Priority:-1 extents:1 across:520908k SS[ 1.800947] init: property_set("ro.board.platform", "rk3399") failed[ 1.801440] init: property_set("ro.rk.screenoff_time", "60000") failed[ 1.801616] init: property_set("ro.rk.screenshot_enable", "true") failed[ 1.801805] init: (Loading properties from /system/build.prop took 0.00s.)[ 1.801898] init: (Loading properties from /vendor/build.prop took 0.00s.)[ 1.801935] init: (Loading properties from /factory/factory.prop took 0.00s.)[ 1.802064] fs_mgr: Warning: unknown flag resize[ 1.802179] init: /recovery not specified in fstab[ 1.802466] init: Starting service 'debuggerd'...[ 1.803007] init: Starting service 'debuggerd64'...[ 1.803558] init: Starting service 'vold'...[ 1.804390] init: Not bootcharting.[ 1.810172] random: debuggerd: uninitialized urandom read (40 bytes read, 39 bits of entropy available)[ 1.810228] random: vdc: uninitialized urandom read (40 bytes read, 39 bits of entropy available)[ 1.813329] random: debuggerd64: uninitialized urandom read (40 bytes read, 39 bits of entropy available)[ 1.814981] random: vold: uninitialized urandom read (40 bytes read, 39 bits of entropy available)[ 1.918881] fs_mgr: Warning: unknown flag resize[ 1.946356] init: Failed to reload policy[ 1.946699] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...[ 1.969139] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 216) exited with status 0[ 1.973633] tmpfs: No value for mount option 'seclabel'[ 1.974275] init: write_file: Unable to open '/proc/sys/kernel/core_pattern': No such file or directory[ 1.974529] init: (Loading properties from /data/local.prop took 0.00s.)[ 1.974655] init: Starting service 'logd-reinit'...[ 1.975980] init: write_file: Unable to open '/proc/sys/vm/min_free_order_shift': No such file or directory[ 1.978021] init: Starting service 'healthd'...[ 1.978697] init: cannot find '/system/bin/displayd' (No such file or directory), disabling 'displayd'[ 1.979383] init: Starting service 'earlylogs'...[ 1.980194] init: Starting service 'lmkd'...[ 1.980796] init: Starting service 'servicemanager'...[ 1.981804] init: Starting service 'surfaceflinger'...[ 1.981904] binder: 218:218 transaction failed 29189/-22, size 0-0 line 2948[ 1.985821] init: write_file: Unable to open '/proc/sys/vm/lazy_vfree_tlb_flush_all_threshold': No such file or directory[ 1.996755] init: cannot find '/system/xbin/fsu' (No such file or directory), disabling 'fsud'[ 1.996917] init: Service 'earlylogs' (pid 219) exited with status 0[ 1.997119] init: Starting service 'vm_daemon'...[ 1.998629] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'[ 1.998741] init: write: cannot expand '${ro.serialno}'[ 1.999724] file system registered[ 2.000393] using random self ethernet address[ 2.000409] using random host ethernet address[ 2.000493] init: write_file: Unable to open '/config/usb_gadget/g1/functions/rndis.gs4/wceis': Permission denied[ 2.008661] init: Starting service 'console'...[ 2.009992] init: Starting service 'adbd'...[ 2.011460] init: Starting service 'exec 2 (/system/bin/vdc)'...[ 2.012865] logd.daemon: reinit[ 2.013035] init: Service 'logd-reinit' (pid 217) exited with status 0[ 2.025415] init: Service 'exec 2 (/system/bin/vdc)' (pid 227) exited with status 0rk3399_firefly_face:/ $ [ 2.589598] init: Starting service 'bootanim'...[ 2.642760] rockchip-vop ff900000.vop: Update mode to 800x1280p60, type: 16[ 2.643333] dw-mipi-dsi ff960000.dsi: final DSI-Link bandwidth: 504 x 4 Mbps[ 2.654789] dw-mipi-dsi ff960000.dsi: failed to wait for phy clk lane stop state[ 2.661810] panel_simple: set lcd-55power(56) active=1,delay:6ms[ 2.667889] panel_simple: set lcd-rst(92) active=1,delay:6ms[ 2.978944] fs_mgr: Running /system/bin/fsck.f2fs -a /dev/block/dm-0[ 2.983651] healthd: BatteryCurrentNowPath not found[ 2.983680] healthd: BatteryCycleCountPath not found[ 2.994824] dw-mipi-dsi ff960000.dsi: lane module is not in stop state[ 2.995559] fsck.f2fs: Info: Fix the reported corruption.[ 2.995559] [ 2.995603] fsck.f2fs: c->start_sector=0[ 2.995603] [ 2.995613] fsck.f2fs: Info: Segments per section = 1[ 2.995613] [ 2.995622] fsck.f2fs: Info: Sections per zone = 1[ 2.995622] [ 2.995631] fsck.f2fs: Info: sector size = 512[ 2.995631] [ 2.995640] fsck.f2fs: Info: total sectors = 25488320 (12445 MB)[ 2.995640] [ 2.995649] fsck.f2fs: Info: MKFS version[ 2.995649] [ 2.995660] fsck.f2fs: "Linux version 4.4.126 (ljrh@ljrh-srv) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Sat May 9 12:02:22 CST 2020"[ 2.995660] [ 2.995669] fsck.f2fs: Info: FSCK version[ 2.995669] [ 2.995679] fsck.f2fs: from "Linux version 4.4.126 (ljrh@ljrh-srv) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Sat May 9 12:02:22 CST 2020"[ 2.995679] [ 2.995689] fsck.f2fs: to "Linux version 4.4.126 (ljrh@ljrh-srv) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #1 SMP PREEMPT Sat May 9 12:02:22 CST 2020"[ 2.995689] [ 2.995724] fsck.f2fs: Info: superblock features = 0 : [ 2.995724] [ 2.995734] fsck.f2fs: Info: superblock encrypt level = 0, salt = 00000000000000000000000000000000[ 2.995734] [ 2.995743] fsck.f2fs: Info: total FS sectors = 25488320 (12445 MB)[ 2.995743] [ 2.995752] fsck.f2fs: Info: CKPT version = ef[ 2.995752] [ 2.995760] fsck.f2fs: Info: No error was reported[ 2.995760] [ 3.066367] F2FS-fs (dm-0): Mounted with checkpoint version = ef[ 3.066492] fs_mgr: __mount(source=/dev/block/dm-0,target=/data,type=f2fs)=0[ 3.074482] init: (Loading properties from /data/local.prop took 0.01s.)[ 3.148060] init: Starting service 'logd-reinit'...[ 3.162856] init: Starting service 'ap_log_srv'...[ 3.175480] init: Not bootcharting.[ 3.188176] logd.daemon: reinit[ 3.189937] init: Service 'logd-reinit' (pid 292) exited with status 0[ 3.226561] init: Failed to reload policy[ 3.226709] init: Starting service 'exec 3 (/system/bin/tzdatacheck)'...[ 3.241438] init: Service 'exec 3 (/system/bin/tzdatacheck)' (pid 307) exited with status 0[ 3.246087] F2FS-fs (dm-0): Unrecognized mount option "seclabel" or missing value[ 3.249013] init: write_file: Unable to open '/proc/sys/kernel/core_pattern': No such file or directory[ 3.249750] init: Starting service 'exec 4 (/system/bin/bootstat)'...[ 3.262820] init: Starting service 'apk_logfs'...[ 3.264117] init: Service 'ap_log_srv' (pid 293) exited with status 0[ 3.265552] init: Service 'exec 4 (/system/bin/bootstat)' (pid 310) exited with status 0[ 3.266244] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 5 (/system/bin/update_verifier)'[ 3.266411] init: Starting service 'ril-daemon'...[ 3.268159] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'[ 3.268333] init: Starting service 'drmservice'...[ 3.269133] init: cannot find '/system/bin/bplus_helper' (No such file or directory), disabling 'bplus_helper'[ 3.269356] init: Starting service 'up_eth0'...[ 3.270417] init: cannot find '/system/bin/rk_store_keybox' (No such file or directory), disabling 'rk_store_keybox'[ 3.270793] init: Starting service 'akmd'...[ 3.272480] init: Starting service 'zygote'...[ 3.273114] init: Starting service 'zygote_secondary'...[ 3.273948] init: Starting service 'audioserver'...[ 3.274732] init: Starting service 'cameraserver'...[ 3.275253] init: couldn't write 320 to /dev/cpuset/camera-daemon/tasks: No such file or directory[ 3.276660] init: Starting service 'drm'...[ 3.276919] rk_gmac-dwmac fe300000.ethernet: rk_get_eth_addr: mac address: aa:42:d4:e1:7f:d6[ 3.276951] eth0: device MAC address aa:42:d4:e1:7f:d6[ 3.277822] init: Starting service 'installd'...[ 3.279143] init: Starting service 'keystore'...[ 3.279960] init: Starting service 'mediacodec'...[ 3.280838] init: Starting service 'mediadrm'...[ 3.283762] init: Starting service 'mediaextractor'...[ 3.285590] init: Starting service 'media'...[ 3.286910] init: Starting service 'netd'...[ 3.289580] init: Starting service 'crashlogd'...[ 3.290572] init: Starting service 'log-watch'...[ 3.291493] init: Starting service 'gatekeeperd'...[ 3.292480] init: Starting service 'perfprofd'...[ 3.293605] init: Service 'akmd' (pid 316) exited with status 254[ 3.317029] init: Service 'up_eth0' (pid 315) exited with status 0[ 3.358411] init: Service 'drmservice' (pid 314) exited with status 0[ 3.421723] read descriptors[ 3.421752] read strings[ 3.719076] init: Untracked pid 368 exited with status 0[ 3.816998] init: Untracked pid 379 exited with status 0[ 4.290709] E:camsys_extdev_register(258): Request RK30_PIN1_PC6(54) failed[ 4.291066] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp[ 4.291074] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22[ 4.291081] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl[ 4.291087] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back[ 4.291092] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed![ 4.505151] random: nonblocking pool is initialized[ 4.539282] W:camsys_phy_ops(530): mipiphy->phy_index(0) != extdev->phy.info.mipi.phy_index(1)![ 4.937852] init: Untracked pid 383 exited with status 1[ 4.944889] init: Untracked pid 372 exited with status 1[ 5.579597] capability: warning: `main' uses 32-bit capabilities (legacy support in use)[ 10.171994] configfs-gadget gadget: unbind function 'mtp'/ffffffc07c13b000[ 10.172063] configfs-gadget gadget: unbind function 'Function FS Gadget'/ffffffc07c096c38[ 10.172428] android_work: did not send uevent (0 0 (null))[ 10.172524] init: Service 'adbd' is being killed...[ 10.173392] init: Service 'adbd' (pid 226) killed by signal 9[ 10.173449] init: Service 'adbd' (pid 226) killing any children in process group[ 10.223695] init: Starting service 'adbd'...[ 10.233346] read descriptors[ 10.233456] read strings[ 10.276327] acc_open[ 10.276429] acc_release[ 11.069285] sdcardfs version 2.0[ 11.069331] sdcardfs: dev_name -> /data/media[ 11.069337] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,mask=6,userid=0,gid=1015[ 11.069345] sdcardfs: mnt -> ffffffc04cb36aa0[ 11.069435] sdcardfs: mounted on top of /data/media type f2fs[ 11.071488] sdcardfs version 2.0[ 11.071515] sdcardfs: dev_name -> /data/media[ 11.071522] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,mask=23,userid=0,gid=9997[ 11.071530] sdcardfs: mnt -> ffffffc04c8f2aa0[ 11.071609] sdcardfs: mounted on top of /data/media type f2fs[ 11.072240] sdcardfs version 2.0[ 11.072260] sdcardfs: dev_name -> /data/media[ 11.072266] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,mask=7,userid=0,gid=9997[ 11.072273] sdcardfs: mnt -> ffffffc04c8f38a0[ 11.072324] sdcardfs: mounted on top of /data/media type f2fs[ 12.451942] W:camsys_phy_ops(530): mipiphy->phy_index(0) != extdev->phy.info.mipi.phy_index(1)![ 13.534242] init: cannot find '/system/bin/glgps' (No such file or directory), disabling 'gpsd'[ 13.534451] init: Starting service 'mode_switch'...[ 13.537923] init: Starting service 'tp_mode_switch'...[ 13.539789] init: Starting service 'exec 6 (/system/bin/bootstat)'...[ 13.563858] init: Service 'tp_mode_switch' (pid 1162) exited with status 1[ 13.572119] init: Service 'exec 6 (/system/bin/bootstat)' (pid 1164) exited with status 0[ 13.572471] init: Starting service 'exec 7 (/system/bin/bootstat)'...[ 13.580154] init: Service 'exec 7 (/system/bin/bootstat)' (pid 1168) exited with status 0[ 13.580251] init: Starting service 'exec 8 (/system/bin/bootstat)'...[ 13.595304] init: Service 'exec 8 (/system/bin/bootstat)' (pid 1169) exited with status 0[ 13.595455] init: Starting service 'exec 9 (/system/bin/bootstat)'...[ 13.605396] init: Service 'exec 9 (/system/bin/bootstat)' (pid 1170) exited with status 0[ 13.795920] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller[ 13.796929] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 7[ 13.807825] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010[ 13.807897] xhci-hcd xhci-hcd.10.auto: irq 235, io mem 0xfe800000[ 13.808094] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002[ 13.808117] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 13.808126] usb usb7: Product: xHCI Host Controller[ 13.808135] usb usb7: Manufacturer: Linux 4.4.126 xhci-hcd[ 13.808143] usb usb7: SerialNumber: xhci-hcd.10.auto[ 13.809075] hub 7-0:1.0: USB hub found[ 13.809301] hub 7-0:1.0: 1 port detected[ 13.809689] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller[ 13.811170] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 8[ 13.811851] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.[ 13.812003] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003[ 13.812020] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 13.812028] usb usb8: Product: xHCI Host Controller[ 13.812037] usb usb8: Manufacturer: Linux 4.4.126 xhci-hcd[ 13.812044] usb usb8: SerialNumber: xhci-hcd.10.auto[ 13.820705] hub 8-0:1.0: USB hub found[ 13.821151] hub 8-0:1.0: 1 port detected[ 13.822512] rockchip-dwc3 usb@fe800000: USB HOST connected[ 13.828135] init: Service 'mode_switch' (pid 1161) exited with status 1[ 16.263662] init: Untracked pid 1445 exited with status 0[ 16.301405] init: Untracked pid 1454 exited with status 0[ 16.681113] init: Service 'bootanim' is being killed...[ 16.760398] init: Service 'bootanim' (pid 276) killed by signal 9[ 17.281812] init: Untracked pid 1457 exited with status 0[ 17.285458] init: Untracked pid 1448 exited with status 0
自行编译的固件,无法识别硬件为V2
自行编译固件,启动缺少
麻烦按照face-rk3399 官网维基更新到最新源码
页:
[1]