板块列表 › Firefly-RK3399 › AIO3399 HDMI IN功能异常

nero2019 发表于 2020-9-21 16:48:51

AIO3399 HDMI IN功能异常

1.进入界面后，点击HDMI IN apk，apk弹出无响应
2.量硬件信,3.3V 1.8V 1.2V正常，27M晶振正常。下面是开机到点击HDMI IN报错的log.

DDR Version 1.17 20190115
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg = 0x32817281, stride = 0x9
OUT
Boot1: 2017-06-09, version: 1.09
CPUId = 0x0
ChipType = 0x10, 1833
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
SdmmcInit=0 20
StorageInit ok = 66689
LoadTrustBL
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x7a274
RunBL31 0x10000

NOTICE:BL31: v1.3(debug):2bb878d
NOTICE:BL31: Built : 11:57:30, Jan4 2019
NOTICE:BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1181): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec7 06:11:20 UTC 2018 aarch64)

INF TEE-CORE:init_primary_helper:338: Release version: 1.2

INF TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2014.10-RK3399-06 (Apr 11 2019 - 11:52:29)

CPU: rk3399
cpu version = 0
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 800000000HZ
               aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
               aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
               hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    cpll = 800000000HZ
    dpll = 800000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
Board:        Rockchip platform Board
Uboot as second level loader
DRAM:Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
SdmmcInit = 0 20
storage init OK!
Using default environment

GetParam
remotectl v0.1
pwm freq=0xb8320
pwm_freq_nstime=0x52d
Load FDT from resource image.
power key: bank-0 pin-5
can't find dts node for fixed
usb bc: can find node by path: /dwc-control-usb/usb_bc
dwc_otg_check_dpdm: usb bc disconnected
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=66
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 800000000HZ
               aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
               aclk_periph_l0 = 100000000HZ, hclk_periph_l0 = 100000000HZ, pclk_periph_l0 = 50000000HZ
               hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
    cpll = 800000000HZ
    dpll = 800000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2019-04-11#1.09
empty serial no.
normal boot.
checkKey
vbus = 0
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
failed to find phy node
failed to find panel driver
read logo on state from dts
no fuel gauge found
can't find dts node for deviceinfo
dw_rk_hdmi_register:fail to read deviceinfo
hdmi baseparamer 0x0@0-0
check header error
parse edid base block error-2
check header error
parse edid base block error-2
check header error
parse edid base block error-2
no edid message:use default vic config:4
hdmi_dev->video.vic is 4
rk lcdc - 0 dclk set: dclk = 74250000HZ, pll select = 0, div = 1
rockchip_panel_prepare: failed to find panel prepare funcs
hdmi_dev_config_video vic 4 color_output 1 color_output_depth 8
pixel clk is 74250000 tmds clk is 74250000
hsync_pol 1 vsync_pol 1
sucess output HDMI.
PHY PLL not locked: PCLK_ON=1,TMDSCLK_ON=0
rockchip_panel_enable: failed to find panel prepare funcs
ERROR: : Cannot find logo_kernel.bmp!
failed to display kernel logo
checkKey
vbus = 0
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
Hit any key to stop autoboot:0
load fdt from resouce.
vendor read error!
Set oem_unlocked=0Secure Boot state: 0
kernel   @ 0x00280000 (0x0125a008)
ramdisk@ 0x04bf0000 (0x001ad8d4)
bootrk: do_bootm_linux...
   Loading Device Tree to 0000000004600000, end 0000000004616a02 ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:000000000a200000, 0000000075e00000
WARNING: could not set reg FDT_ERR_BADOFFSET.

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Initializing cgroup subsys schedtune
[    0.000000] Linux version 4.4.103 (liangkd@tchip-server) (gcc version 4.9 20150123 (prerelease) (GCC) ) #1947 SMP PREEMPT Thu Apr 11 11:35:03 CST 2019
[    0.000000] Boot CPU: AArch64 Processor
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole enabled
[    0.000000] hdmi init vic is -1
[    0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eef7000 s45504 r8192 d32320 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 507912
[    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00010000@0x0002C000(recovery),0x00038000@0x0003C000(backup),0x00040000@0x00074000(cache),0x00300000@0x000B4000(system),0x00008000@0x003B4000(metadata),0x00002000@0x003BC000(baseparamer),-@0x003BE000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2019-04-11_11:52:29 hdmi.vic=-1 SecureBootCheckOk=0
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] software IO TLB (0MB) mapped at
[    0.000000] Memory: 1988584K/2064384K available (11006K kernel code, 1640K rwdata, 5256K rodata, 832K init, 1073K bss, 59416K reserved, 16384K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]   modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]   vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009070000 - 0xffffff8009140000   (   832 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008b40000   ( 11008 KB)
[    0.000000]   .rodata : 0xffffff8008b40000 - 0xffffff8009070000   (5312 KB)
[    0.000000]       .data : 0xffffff8009140000 - 0xffffff80092da008   (1641 KB)
[    0.000000]   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (   8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
[    0.000000]   fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (4108 KB)
[    0.000000]   PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]   memory: 0xffffffc000200000 - 0xffffffc080000000   (2046 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]         Build-time adjustment of leaf fanout to 64.
[    0.000000]         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x000000000a280000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x000000000a290000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[    0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001963] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[    0.002928] pid_max: default: 32768 minimum: 301
[    0.003445] Security Framework initialized
[    0.003836] SELinux:Initializing.
[    0.004252] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.004882] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.006319] Initializing cgroup subsys freezer
[    0.006746] Initializing cgroup subsys debug
[    0.008039] sched-energy: Sched-energy-costs installed from DT
[    0.008588] CPU0: update cpu_capacity 401
[    0.009043] ASID allocator initialised with 65536 entries
[    0.025869] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.027144] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.039264] Detected VIPT I-cache on CPU1
[    0.039296] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.039331] CPU1: using LPI pending table @0x000000000a3f0000
[    0.039374] CPU1: update cpu_capacity 401
[    0.039378] CPU1: Booted secondary processor
[    0.049260] Detected VIPT I-cache on CPU2
[    0.049280] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.049312] CPU2: using LPI pending table @0x000000007c020000
[    0.049340] CPU2: update cpu_capacity 401
[    0.049343] CPU2: Booted secondary processor
[    0.059297] Detected VIPT I-cache on CPU3
[    0.059315] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.059348] CPU3: using LPI pending table @0x000000007c060000
[    0.059374] CPU3: update cpu_capacity 401
[    0.059378] CPU3: Booted secondary processor
[    0.069346] Detected PIPT I-cache on CPU4
[    0.069374] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.069413] CPU4: using LPI pending table @0x000000007c0a0000
[    0.069453] CPU4: update cpu_capacity 1024
[    0.069456] CPU4: Booted secondary processor
[    0.079368] Detected PIPT I-cache on CPU5
[    0.079386] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.079422] CPU5: using LPI pending table @0x000000007c0e0000
[    0.079449] CPU5: update cpu_capacity 1024
[    0.079452] CPU5: Booted secondary processor
[    0.079537] Brought up 6 CPUs
[    0.091643] SMP: Total of 6 processors activated.
[    0.092086] CPU features: detected feature: GIC system register CPU interface
[    0.092757] CPU: All CPU(s) started at EL2
[    0.093179] alternatives: patching kernel code
[    0.095270] devtmpfs: initialized
[    0.115995] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.116971] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.118267] pinctrl core: initialized pinctrl subsystem
[    0.120361] Failed to find legacy iommu devices
[    0.121181] NET: Registered protocol family 16
[    0.121960] schedtune: init normalization constants...
[    0.122464] schedtune: CLUSTER      min_pwr:    56 max_pwr:   222
[    0.123099] schedtune: CPU            min_pwr:   0 max_pwr:   222
[    0.123746] schedtune: CPU            min_pwr:   0 max_pwr:   222
[    0.124380] schedtune: CPU            min_pwr:   0 max_pwr:   222
[    0.125014] schedtune: CPU            min_pwr:   0 max_pwr:   222
[    0.125649] schedtune: CLUSTER      min_pwr:    65 max_pwr:1108
[    0.126283] schedtune: CPU            min_pwr:   0 max_pwr:1108
[    0.126916] schedtune: CPU            min_pwr:   0 max_pwr:1108
[    0.127555] schedtune: SYSTEM            min_pwr:   121 max_pwr:4434
[    0.128189] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
[    0.128930] schedtune: verify normalization constants...
[    0.129447] schedtune: max_pwr/2^0: 4313 => norm_pwr:1024
[    0.129988] schedtune: max_pwr/2^1: 2156 => norm_pwr:   511
[    0.130528] schedtune: max_pwr/2^2: 1078 => norm_pwr:   255
[    0.131075] schedtune: max_pwr/2^3:539 => norm_pwr:   127
[    0.131615] schedtune: max_pwr/2^4:269 => norm_pwr:    63
[    0.132157] schedtune: max_pwr/2^5:134 => norm_pwr:    31
[    0.132697] schedtune: configured to support 5 boost groups
[    0.141111] cpuidle: using governor ladder
[    0.151114] cpuidle: using governor menu
[    0.151508] Registered FIQ tty driver
[    0.152181] vdso: 2 pages (1 code @ ffffff8008b46000, 1 data @ ffffff8009144000)
[    0.152923] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.154978] DMA: preallocated 2048 KiB pool for atomic allocations
[    0.175781] console enabled
[    0.176369] pstore: Registered ramoops as persistent store backend
[    0.176973] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.179778] fiq debugger fiq mode enabled
[[   0.180428] console enabled
   0.180428] console enabled
[[   0.181113] bootconsole disabled
   0.181113] bootconsole disabled
[    0.182034] Registered fiq debugger ttyFIQ0
[    0.212888] Rockchip hdmi driver version 2.0
.
[    0.215172] iommu: Adding device ff650000.vpu_service to group 0
[    0.215274] iommu: Adding device ff660000.rkvdec to group 1
[    0.215342] iommu: Adding device ff670000.iep to group 2
[    0.215436] iommu: Adding device ff8f0000.vop to group 3
[    0.215512] iommu: Adding device ff900000.vop to group 4
[    0.215620] iommu: Adding device ff910000.isp to group 5
[    0.215702] iommu: Adding device ff920000.isp to group 6
[    0.216392] rk_iommu ff670800.iommu: can't get aclk
[    0.216412] rk_iommu ff670800.iommu: can't get hclk
[    0.217285] SCSI subsystem initialized
[    0.222158] usbcore: registered new interface driver usbfs
[    0.222211] usbcore: registered new interface driver hub
[    0.222289] usbcore: registered new device driver usb
[    0.222698] media: Linux media interface: v0.10
[    0.222738] Linux video capture interface: v2.00
[    0.222867] pps_core: LinuxPPS API ver. 1 registered
[    0.222880] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.222912] PTP clock support registered
[    0.226162] Advanced Linux Sound Architecture Driver Initialized.
[    0.226637] Bluetooth: Core ver 2.21
[    0.226685] NET: Registered protocol family 31
[    0.226696] Bluetooth: HCI device and connection manager initialized
[    0.226712] Bluetooth: HCI socket layer initialized
[    0.226736] Bluetooth: L2CAP socket layer initialized
[    0.226769] Bluetooth: SCO socket layer initialized
[    0.227787] rockchip-cpuinfo cpuinfo: Serial                : 63e887619e731ae0
[    0.228257] clocksource: Switched to clocksource arch_sys_counter
[    0.272579] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.272823] NET: Registered protocol family 2
[    0.273277] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.273420] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.273698] TCP: Hash tables configured (established 16384 bind 16384)
[    0.273779] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.273842] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.274021] NET: Registered protocol family 1
[    0.274537] Trying to unpack rootfs image as initramfs...
[    0.363603] Freeing initrd memory: 1716K
[    0.364118] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.364210] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.366835] audit: initializing netlink subsys (disabled)
[    0.366897] audit: type=2000 audit(0.363:1): initialized
[    0.371919] VFS: Disk quotas dquot_6.6.0
[    0.372044] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.373431] fuse init (API version 7.23)
[    0.374546]
[    0.374546] TEE Core Framework initialization (ver 1:0.1)
[    0.374578] TEE armv7 Driver initialization
[    0.374980] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[    0.374997] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[    0.375178] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[    0.379173] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.379201] io scheduler noop registered
[    0.379376] io scheduler cfq registered (default)
[    0.380636] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
[    0.381674] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
[    0.386766] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    0.386793] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    0.386817] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    0.908306] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    0.909053] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    0.911015] iep: failed to find iep power down clock source.
[    0.912097] IEP Power ON
[    0.912554] IEP Power OFF
[    0.912899] IEP Driver loaded succesfully
[    0.913518] Module initialized.
[    0.914138] rk-vcodec ff650000.vpu_service: probe device
[    0.914197] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc07c2da010
[    0.914373] rk-vcodec ff650000.vpu_service: allocator is drm
[    0.914430] rk-vcodec ff650000.vpu_service: checking hw id 0
[    0.914937] rk-vcodec ff650000.vpu_service: init success
[    0.915523] rk-vcodec ff660000.rkvdec: probe device
[    0.915572] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc07c2da810
[    0.915708] rk-vcodec ff660000.rkvdec: allocator is drm
[    0.915762] rk-vcodec ff660000.rkvdec: checking hw id 6876
[    0.916090] rk-vcodec ff660000.rkvdec: init success
[    0.917776] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.917796] dma-pl330 ff6d0000.dma-controller:         DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.919159] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.919178] dma-pl330 ff6e0000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.920906] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    0.923258] console disabled
[    0.923472] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[    0.924323] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
[    0.925026] Initialized drm 1.1.0 20060810
[    0.930352] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops)
[    0.930686] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops)
[    0.930998] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    0.931020] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    0.931112] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    0.932007] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops)
[    0.932027] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.932040] No driver support for vblank timestamp query.
[    0.933667] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[    1.000115] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[    1.033773] rockchip-drm display-subsystem: fb0:frame buffer device
[    1.047946] mali ff9a0000.gpu: Failed to get regulator
[    1.047988] mali ff9a0000.gpu: Power control initialization failed
[    1.048335] Unable to detect cache hierarchy from DT for CPU 0
[    1.056260] brd: module loaded
[    1.061003] loop: module loaded
[    1.061524] zram: Added device: zram0
[    1.062210] SCSI Media Changer driver v0.25
[    1.063550] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[    1.063576] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[    1.064393] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max
[    1.234734] wk2xxx_serial_init()
[    1.234752] wk2xxx_request_port
[    1.234766] ttysWK0 at I/O 0x1 (irq = 103, base_baud = 460800) is a wk2xxx
[    1.235069] uart_add_one_port success for line i:= 0 with right 0
[    1.235082] wk2xxx_request_port
[    1.235094] ttysWK1 at I/O 0x2 (irq = 103, base_baud = 460800) is a wk2xxx
[    1.235287] uart_add_one_port success for line i:= 1 with right 0
[    1.235299] wk2xxx_request_port
[    1.235312] ttysWK2 at I/O 0x3 (irq = 103, base_baud = 460800) is a wk2xxx
[    1.235500] uart_add_one_port success for line i:= 2 with right 0
[    1.235512] wk2xxx_request_port
[    1.235523] ttysWK3 at I/O 0x4 (irq = 103, base_baud = 460800) is a wk2xxx
[    1.235709] uart_add_one_port success for line i:= 3 with right 0
[    1.235722] uart_add_one_port = 0x0
[    1.235751] register spi return v = :0
[    1.235804] tun: Universal TUN/TAP device driver, 1.6
[    1.235815] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.236729] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    1.236828] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.236849] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    1.236863] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
[    1.236891] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.237063] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.242083] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.242209] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.242221]Ring mode enabled
[    1.242230]DMA HW capability register supported
[    1.242240]Normal descriptors
[    1.242251]RX Checksum Offload Engine supported (type 2)
[    1.242262]Wake-Up On Lan supported
[    1.242305]Enable RX Mitigation via HW Watchdog Timer
[    1.317018] libphy: stmmac: probed
[    1.317044] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.317058] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.317071] eth%d: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02)
[    1.317083] eth%d: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03)
[    1.317095] eth%d: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04)
[    1.317106] eth%d: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05)
[    1.317118] eth%d: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06)
[    1.317129] eth%d: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07)
[    1.317140] eth%d: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08)
[    1.317152] eth%d: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09)
[    1.317163] eth%d: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a)
[    1.317174] eth%d: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b)
[    1.317185] eth%d: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c)
[    1.317196] eth%d: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d)
[    1.317207] eth%d: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e)
[    1.317219] eth%d: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f)
[    1.317230] eth%d: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10)
[    1.317241] eth%d: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11)
[    1.317252] eth%d: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12)
[    1.317264] eth%d: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13)
[    1.317275] eth%d: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14)
[    1.317286] eth%d: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15)
[    1.317298] eth%d: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16)
[    1.317308] eth%d: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17)
[    1.317320] eth%d: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18)
[    1.317330] eth%d: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19)
[    1.317342] eth%d: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a)
[    1.317352] eth%d: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b)
[    1.317363] eth%d: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c)
[    1.317375] eth%d: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d)
[    1.317385] eth%d: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e)
[    1.317396] eth%d: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f)
[    1.318323] PPP generic driver version 2.4.2
[    1.318501] PPP BSD Compression module registered
[    1.318517] PPP Deflate Compression module registered
[    1.318548] PPP MPPE Compression module registered
[    1.318566] NET: Registered protocol family 24
[    1.318604] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    1.318618] CSLIP: code copyright 1989 Regents of the University of California.
[    1.318687] usbcore: registered new interface driver mt7601u
[    1.318713] Rockchip WiFi SYS interface (V1.00) ...
[    1.318776] usbcore: registered new interface driver catc
[    1.318818] usbcore: registered new interface driver kaweth
[    1.318833] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.318872] usbcore: registered new interface driver pegasus
[    1.318913] usbcore: registered new interface driver rtl8150
[    1.318958] usbcore: registered new interface driver r8152
[    1.318973] hso: drivers/net/usb/hso.c: Option Wireless
[    1.319028] usbcore: registered new interface driver hso
[    1.319074] usbcore: registered new interface driver asix
[    1.319116] usbcore: registered new interface driver ax88179_178a
[    1.319160] usbcore: registered new interface driver cdc_ether
[    1.319202] usbcore: registered new interface driver cdc_eem
[    1.319244] usbcore: registered new interface driver dm9601
[    1.319293] usbcore: registered new interface driver smsc75xx
[    1.319342] usbcore: registered new interface driver smsc95xx
[    1.319386] usbcore: registered new interface driver gl620a
[    1.319427] usbcore: registered new interface driver net1080
[    1.319469] usbcore: registered new interface driver plusb
[    1.319511] usbcore: registered new interface driver rndis_host
[    1.319553] usbcore: registered new interface driver cdc_subset
[    1.319595] usbcore: registered new interface driver zaurus
[    1.319641] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.319705] usbcore: registered new interface driver int51x1
[    1.319747] usbcore: registered new interface driver kalmia
[    1.319789] usbcore: registered new interface driver ipheth
[    1.319833] usbcore: registered new interface driver sierra_net
[    1.319879] usbcore: registered new interface driver cx82310_eth
[    1.319930] usbcore: registered new interface driver cdc_ncm
[    1.319971] usbcore: registered new interface driver qmi_wwan
[    1.320015] usbcore: registered new interface driver cdc_mbim
[    1.325868] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd
[    1.331012] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[    1.331802] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.331822] ehci-pci: EHCI PCI platform driver
[    1.331885] ehci-platform: EHCI generic platform driver
[    1.335542] ehci-platform fe380000.usb: EHCI Host Controller
[    1.335571] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    1.335767] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    1.344937] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.345072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.345088] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.345103] usb usb1: Product: EHCI Host Controller
[    1.345115] usb usb1: Manufacturer: Linux 4.4.103 ehci_hcd
[    1.345127] usb usb1: SerialNumber: fe380000.usb
[    1.345625] hub 1-0:1.0: USB hub found
[    1.345658] hub 1-0:1.0: 1 port detected
[    1.349543] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.349570] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    1.349723] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    1.358293] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.358415] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.358431] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.358445] usb usb2: Product: EHCI Host Controller
[    1.358457] usb usb2: Manufacturer: Linux 4.4.103 ehci_hcd
[    1.358469] usb usb2: SerialNumber: fe3c0000.usb
[    1.358954] hub 2-0:1.0: USB hub found
[    1.358990] hub 2-0:1.0: 1 port detected
[    1.359533] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.359569] ohci-platform: OHCI generic platform driver
[    1.359882] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.359907] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    1.360045] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    1.415831] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    1.415877] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.415895] usb usb3: Product: Generic Platform OHCI controller
[    1.415911] usb usb3: Manufacturer: Linux 4.4.103 ohci_hcd
[    1.415925] usb usb3: SerialNumber: fe3a0000.usb
[    1.416565] hub 3-0:1.0: USB hub found
[    1.416608] hub 3-0:1.0: 1 port detected
[    1.417376] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.417409] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    1.417641] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    1.472455] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    1.472525] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.472542] usb usb4: Product: Generic Platform OHCI controller
[    1.472557] usb usb4: Manufacturer: Linux 4.4.103 ohci_hcd
[    1.472570] usb usb4: SerialNumber: fe3e0000.usb
[    1.473178] hub 4-0:1.0: USB hub found
[    1.473219] hub 4-0:1.0: 1 port detected
[    1.474657] usbcore: registered new interface driver cdc_acm
[    1.474671] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.474757] usbcore: registered new interface driver usblp
[    1.474821] usbcore: registered new interface driver cdc_wdm
[    1.474888] usbcore: registered new interface driver uas
[    1.475051] usbcore: registered new interface driver usb-storage
[    1.475112] usbcore: registered new interface driver ums-alauda
[    1.475170] usbcore: registered new interface driver ums-cypress
[    1.475235] usbcore: registered new interface driver ums-datafab
[    1.475291] usbcore: registered new interface driver ums_eneub6250
[    1.475346] usbcore: registered new interface driver ums-freecom
[    1.475404] usbcore: registered new interface driver ums-isd200
[    1.475465] usbcore: registered new interface driver ums-jumpshot
[    1.475522] usbcore: registered new interface driver ums-karma
[    1.475579] usbcore: registered new interface driver ums-onetouch
[    1.475637] usbcore: registered new interface driver ums-sddr09
[    1.475695] usbcore: registered new interface driver ums-sddr55
[    1.475756] usbcore: registered new interface driver ums-usbat
[    1.475867] usbcore: registered new interface driver usbserial
[    1.475918] usbcore: registered new interface driver usbserial_generic
[    1.475959] usbserial: USB Serial support registered for generic
[    1.476020] usbcore: registered new interface driver ch341
[    1.476058] usbserial: USB Serial support registered for ch341-uart
[    1.476124] usbcore: registered new interface driver cp210x
[    1.476162] usbserial: USB Serial support registered for cp210x
[    1.476250] usbcore: registered new interface driver option
[    1.476288] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.476562] usbcore: registered new interface driver pl2303
[    1.476600] usbserial: USB Serial support registered for pl2303
[    1.476677] usbcore: registered new interface driver trancevibrator
[    1.476695] usb20_otg: version 3.10a 21-DEC-2012
[    1.476995] usb20_host: version 3.10a 21-DEC-2012
[    1.477697] usbcore: registered new interface driver xpad
[    1.477755] usbcore: registered new interface driver usb_acecad
[    1.477808] usbcore: registered new interface driver aiptek
[    1.477859] usbcore: registered new interface driver gtco
[    1.477918] usbcore: registered new interface driver hanwang
[    1.477968] usbcore: registered new interface driver kbtab
[    1.477985] ==gsl_ts_init==
[    1.478018] ret=0
[    1.478454] .. rk pwm remotectl v1.1 init
[    1.478687] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    1.479226] sensor_register_slave:mma8452,id=17
[    1.479250] sensor_register_slave:lis3dh,id=7
[    1.479268] sensor_register_slave:mma7660,id=18
[    1.479285] sensor_register_slave:lsm303d,id=22
[    1.479302] sensor_register_slave:gs_mc3230,id=23
[    1.479311]    gsensor_init
[    1.479328] sensor_register_slave:mpu6880_acc,id=24
[    1.479344] sensor_register_slave:mpu6500_acc,id=25
[    1.479361] sensor_register_slave:lsm330_acc,id=26
[    1.479378] sensor_register_slave:akm8975,id=29
[    1.479396] sensor_register_slave:akm8963,id=30
[    1.479413] sensor_register_slave:l3g4200d,id=44
[    1.479429] sensor_register_slave:l3g20d,id=45
[    1.479446] sensor_register_slave:ewtsa,id=46
[    1.479463] sensor_register_slave:lsm330_gyro,id=50
[    1.479480] sensor_register_slave:cm3217,id=52
[    1.479497] sensor_register_slave:cm3218,id=53
[    1.480525] i2c /dev entries driver
[    1.482334] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[    1.482449] fan53555-reg: supplied by vcc5v0_sys
[    1.484382] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[    1.484452] fan53555-reg: supplied by vcc5v0_sys
[    1.486643] rk808 0-001b: Pmic Chip id: 0x0
[    1.490461] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.490538] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.490657] DCDC_REG1: supplied by vcc3v3_sys
[    1.491445] DCDC_REG2: supplied by vcc3v3_sys
[    1.492040] DCDC_REG3: supplied by vcc3v3_sys
[    1.492348] DCDC_REG4: supplied by vcc3v3_sys
[    1.492811] LDO_REG1: supplied by vcc3v3_sys
[    1.493959] LDO_REG2: supplied by vcc3v3_sys
[    1.495020] LDO_REG3: supplied by vcc3v3_sys
[    1.496031] LDO_REG4: supplied by vcc3v3_sys
[    1.497039] LDO_REG5: supplied by vcc3v3_sys
[    1.498072] LDO_REG6: supplied by vcc3v3_sys
[    1.499074] LDO_REG7: supplied by vcc3v3_sys
[    1.500083] LDO_REG8: supplied by vcc3v3_sys
[    1.501081] SWITCH_REG1: supplied by vcc3v3_sys
[    1.501394] SWITCH_REG2: supplied by vcc3v3_sys
[    1.505206] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.505821] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009950000
[    1.506682] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009952000
[    1.506809] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
[    1.506826] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
[    1.506842] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xferon device rockchip-pinctrl
[    1.506857] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
[    1.507325] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff8009954000
[    1.507967] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009956000
[    1.509226] IR NEC protocol handler initialized
[    1.509242] IR RC5(x/sz) protocol handler initialized
[    1.509257] IR RC6 protocol handler initialized
[    1.509271] IR JVC protocol handler initialized
[    1.509285] IR Sony protocol handler initialized
[    1.509300] IR SANYO protocol handler initialized
[    1.509314] IR Sharp protocol handler initialized
[    1.509329] IR MCE Keyboard/mouse protocol handler initialized
[    1.509343] IR XMP protocol handler initialized
[    1.509647] usbcore: registered new interface driver uvcvideo
[    1.509658] USB Video Class driver (1.1.1)
[    1.509677] CamSys driver version: v0.38.0, CamSys head file version: v1.0.0
[    1.515504] __power_supply_register: Expected proper parent device for 'test_ac'
[    1.515683] __power_supply_register: Expected proper parent device for 'test_battery'
[    1.516009] thermal thermal_zone2: power_allocator: sustainable_power will be estimated
[    1.516140] __power_supply_register: Expected proper parent device for 'test_usb'
[    1.519501] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    1.520651] device-mapper: uevent: version 1.0.3
[    1.521060] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.521283] Bluetooth: HCI UART driver ver 2.3
[    1.521297] Bluetooth: HCI UART protocol H4 registered
[    1.521308] Bluetooth: HCI UART protocol LL registered
[    1.521323] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
[    1.521333] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
[    1.521344] rtk_btusb: Register usb char device interface for BT driver
[    1.521662] usbcore: registered new interface driver rtk_btusb
[    1.522241] cpu cpu0: leakage=26
[    1.539505] cpu cpu0: temp=42777, pvtm=146639 (146573 + 66)
[    1.539883] cpu cpu0: pvtm-sel=1
[    1.540291] cpu cpu4: leakage=45
[    1.552459] cpu cpu4: temp=43333, pvtm=156477 (156407 + 70)
[    1.552601] cpu cpu4: pvtm-sel=2
[    1.558217] sdhci: Secure Digital Host Controller Interface driver
[    1.558287] sdhci: Copyright(c) Pierre Ossman
[    1.558307] Synopsys Designware Multimedia Card Interface Driver
[    1.559530] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.559698] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.559720] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.559790] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.559819] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.559873] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    1.559886] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    1.560946] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.561058] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.561078] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.561126] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    1.561151] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.561281] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    1.562207] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.564195] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    1.564209] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    1.591799] mmc0: SDHCI controller on fe330000.sdhci using ADMA
[    1.594089] hidraw: raw HID events driver (C) Jiri Kosina
[    1.599104] usbcore: registered new interface driver usbhid
[    1.599157] usbhid: USB HID core driver
[    1.599348] inv_mpu_iio: inv_mpu_init:746
[    1.600570] ashmem: initialized
[    1.603332] ff100000.saradc supply vref not found, using dummy regulator
[    1.605542] rknandbase v1.1 2016-11-08
[    1.606572] usbcore: registered new interface driver snd-usb-audio
[    1.609132] rt5640 1-001c: Can not read property hp-con-gpio
[    1.609158] rt5640 1-001c: Can not read property: linein-mute.
[    1.611813] lkd tc358749x_parse_dts: power(1)
[    1.611912] lkd tc358749x_parse_dts: int(0)
[    1.612000] lkd tc358749x_parse_dts: reset(1)
[    1.623168] tc358749x 1-000f: tc358749x_parse_dts success
[    1.623377] tc358749x 1-000f: tc358749x_i2c_probe success
[    1.630398] rk-hdmi-dp-sound hdmi-dp-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[    1.633887] mmc0: MAN_BKOPS_EN bit is not set
[    1.634109] u32 classifier
[    1.634129]   Actions configured
[    1.634199] Netfilter messages via NETLINK v0.30.
[    1.634296] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.634772] ctnetlink v0.93: registering with nfnetlink.
[    1.635839] xt_time: kernel timezone is -0000
[    1.636693] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.636949] arp_tables: (C) 2002 David S. Miller
[    1.637693] Initializing XFRM netlink socket
[    1.638301] NET: Registered protocol family 10
[    1.639605] mip6: Mobile IPv6
[    1.639666] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.641346] sit: IPv6 over IPv4 tunneling driver
[    1.641894] NET: Registered protocol family 17
[    1.641951] NET: Registered protocol family 15
[    1.641992] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.642830] Bridge firewalling registered
[    1.642850] Ebtables v2.0 registered
[    1.643065] Bluetooth: RFCOMM TTY layer initialized
[    1.643096] Bluetooth: RFCOMM socket layer initialized
[    1.643131] Bluetooth: RFCOMM ver 1.11
[    1.643159] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.643169] Bluetooth: BNEP filters: protocol multicast
[    1.643186] Bluetooth: BNEP socket layer initialized
[    1.643204] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.643219] Bluetooth: HIDP socket layer initialized
[    1.643269] l2tp_core: L2TP core driver, V2.0
[    1.643295] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.643317] : Enter rfkill_wlan_init
[    1.643808] : Enter rfkill_wlan_probe
[    1.643899] : wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[    1.643911] : wlan_platdata_parse_dt: enable wifi power control.
[    1.643922] : wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.644041] : wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    1.644052] : rfkill_wlan_probe: init gpio
[    1.644065] : Exit rfkill_wlan_probe
[    1.644150] : Enter rfkill_rk_init
[    1.644732] : bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    1.644787] : bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    1.644827] : bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[    1.644867] : bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    1.645357] : Request irq for bt wakeup host
[    1.645399] : BT_WAKE_HOST IRQ fired
[    1.645443] : ** disable irq
[    1.645610] : bt_default device registered.
[    1.645894] sensor_register_slave:mpu6880_gyro,id=49
[    1.646879] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    1.647567] mmcblk0: mmc0:0001 AJTD4R 14.6 GiB
[    1.647661] Registered cp15_barrier emulation handler
[    1.647777] Registered setend emulation handler
[    1.648966] registered taskstats version 1
[    1.650451] rockchip ion idev is NULL
[    1.650472] rga2 ff680000.rga: rga ion client create success!
[    1.650808] rga: Driver loaded successfully ver:3.02
[    1.651452] mmcblk0boot0: mmc0:0001 AJTD4R partition 1 4.00 MiB
[    1.652414] mali ff9a0000.gpu: leakage=37
[    1.655278] mmcblk0boot1: mmc0:0001 AJTD4R partition 2 4.00 MiB
[    1.655756] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB
[    1.656246]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    1.656262]      trust: 0x000800000 -- 0x000c00000 (4 MB)
[    1.656277]       misc: 0x000c00000 -- 0x001000000 (4 MB)
[    1.656290]   resource: 0x001000000 -- 0x002000000 (16 MB)
[    1.656302]   kernel: 0x002000000 -- 0x003800000 (24 MB)
[    1.656313]       boot: 0x003800000 -- 0x005800000 (32 MB)
[    1.656325]   recovery: 0x005800000 -- 0x007800000 (32 MB)
[    1.656337]   backup: 0x007800000 -- 0x00e800000 (112 MB)
[    1.656348]      cache: 0x00e800000 -- 0x016800000 (128 MB)
[    1.656361]   system: 0x016800000 -- 0x076800000 (1536 MB)
[    1.656372]   metadata: 0x076800000 -- 0x077800000 (16 MB)
[    1.656384] baseparamer: 0x077800000 -- 0x077c00000 (4 MB)
[    1.656396]   userdata: 0x077c00000 -- 0x3a3a00000 (12990 MB)
[    1.656444]mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13
[    1.664971] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    1.665160] mali ff9a0000.gpu: temp=43888, pvtm=123992 (123968 + 24)
[    1.666143] mali ff9a0000.gpu: pvtm-sel=1
[    1.667134] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    1.668019] I : : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; : 284; : kbase_devfreq_init(); success initing power_model_simple.
[    1.668770] mali ff9a0000.gpu: Probed as mali0
[    1.674628] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    1.674688] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    1.675269] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[    1.675368] xhci-hcd xhci-hcd.9.auto: irq 234, io mem 0xfe800000
[    1.675629] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.675664] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.675694] usb usb5: Product: xHCI Host Controller
[    1.675718] usb usb5: Manufacturer: Linux 4.4.103 xhci-hcd
[    1.675742] usb usb5: SerialNumber: xhci-hcd.9.auto
[    1.676599] hub 5-0:1.0: USB hub found
[    1.676666] hub 5-0:1.0: 1 port detected
[    1.677161] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    1.677205] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    1.677332] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.677517] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.677550] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.677577] usb usb6: Product: xHCI Host Controller
[    1.677600] usb usb6: Manufacturer: Linux 4.4.103 xhci-hcd
[    1.677623] usb usb6: SerialNumber: xhci-hcd.9.auto
[    1.678462] hub 6-0:1.0: USB hub found
[    1.678532] hub 6-0:1.0: 1 port detected
[    1.681178] xhci-hcd xhci-hcd.9.auto: remove, state 1
[    1.681225] usb usb6: USB disconnect, device number 1
[    1.710181] xhci-hcd xhci-hcd.9.auto: Host not halted after 16000 microseconds.
[    1.710269] xhci-hcd xhci-hcd.9.auto: Host controller not halted, aborting reset.
[    1.710506] xhci-hcd xhci-hcd.9.auto: USB bus 6 deregistered
[    1.710543] xhci-hcd xhci-hcd.9.auto: remove, state 1
[    1.710584] usb usb5: USB disconnect, device number 1
[    1.711292] xhci-hcd xhci-hcd.9.auto: USB bus 5 deregistered
[    1.716114] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    1.716162] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 5
[    1.716505] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[    1.716562] xhci-hcd xhci-hcd.10.auto: irq 235, io mem 0xfe900000
[    1.716706] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.716718] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.716728] usb usb5: Product: xHCI Host Controller
[    1.716736] usb usb5: Manufacturer: Linux 4.4.103 xhci-hcd
[    1.716745] usb usb5: SerialNumber: xhci-hcd.10.auto
[    1.717261] hub 5-0:1.0: USB hub found
[    1.717292] hub 5-0:1.0: 1 port detected
[    1.717553] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    1.717569] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 6
[    1.717626] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.717711] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    1.717722] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.717731] usb usb6: Product: xHCI Host Controller
[    1.717740] usb usb6: Manufacturer: Linux 4.4.103 xhci-hcd
[    1.717749] usb usb6: SerialNumber: xhci-hcd.10.auto
[    1.718215] hub 6-0:1.0: USB hub found
[    1.718242] hub 6-0:1.0: 1 port detected
[    1.719884] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.720072] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.720089] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.720119] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.720145] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.720191] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    1.720200] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    1.720515] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    1.735019] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.748566] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    1.749780] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.749944] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.749972] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.750007] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    1.750048] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.750146] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    1.750511] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq
[    1.750646] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.750866] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.761736] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.776238] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    1.776909] rt5640 1-001c: Can not read property hp-con-gpio
[    1.776950] rt5640 1-001c: Can not read property: linein-mute.
[    1.779967] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[    1.782393] rt5640 1-001c: Can not read property hp-con-gpio
[    1.782432] rt5640 1-001c: Can not read property: linein-mute.
[    1.784359] otg_wakelock_init: No USB transceiver found
[    1.785321] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:03 UTC (1358499003)
[    1.787767] It doesn't contain Rogue gpu
[    1.792556] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
[    1.792647] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.792675] usb 2-1: Product: USB 2.0 Hub
[    1.793975] hub 2-1:1.0: USB hub found
[    1.794053] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.794166] hub 2-1:1.0: 7 ports detected
[    1.796981] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.797543] rt5640 1-001c: Can not read property hp-con-gpio
[    1.797571] rt5640 1-001c: Can not read property: linein-mute.
[    1.798712] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.801719] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.818025] ret 1024
[    1.818601] I : : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; : 414; : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-Firefly-RK3399_Android7.1.1_170516_internal-2655-g05181af', rk_ko_ver is '5', built at '11:32:17', on 'Apr 11 2019'.
[    1.819164] Mali: Mali device driver loaded
[    1.819733] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
[    1.820571] rt5640 1-001c: Can not read property hp-con-gpio
[    1.820583] rt5640 1-001c: Can not read property: linein-mute.
[    1.821041] ALSA device list:
[    1.821052]   #0: rk-hdmi-dp-sound
[    1.821059]   #1: ROCKCHIP,SPDIF
[    1.821702] Freeing unused kernel memory: 832K
[    1.824380] init: init first stage started!
[    1.825997] init: init second stage started!
[    1.829055] init: Setting ro.rk.soc=rk3399
[    1.829214] init: OK,EMMC DRIVERS INIT OK
[    1.829246] init: property_set("ro.boot.mode", "emmc") failed
[    1.829327] init: property_set("ro.hardware", "rk30board") failed
[    1.829399] init: Running restorecon...
[    1.829554] init: waitpid failed: No child processes
[    1.830043] init: (Loading properties from /default.prop took 0.00s.)
[    1.832271] init: /init.rc: 588: invalid keyword 'echo'
[    1.832870] init: (Parsing /init.environ.rc took 0.00s.)
[    1.833505] init: (Parsing /init.usb.rc took 0.00s.)
[    1.834908] init: (Parsing init.rk30board.bootmode.emmc.rc took 0.00s.)
[    1.836110] init: (Parsing init.rk30board.usb.rc took 0.00s.)
[    1.836237] init: (Parsing init.rk30board.environment.rc took 0.00s.)
[    1.836351] init: could not import file '/init.stt_trace.rc' from '/init.debug.rc': No such file or directory
[    1.836613] init: (Parsing /init.logs.rc took 0.00s.)
[    1.836728] init: (Parsing /init.crashlogd.rc took 0.00s.)
[    1.836855] init: (Parsing /init.coredump.rc took 0.00s.)
[    1.836930] init: (Parsing /init.log-watch.rc took 0.00s.)
[    1.837012] init: (Parsing /init.kernel.rc took 0.00s.)
[    1.837166] init: (Parsing /init.debug-charging.rc took 0.00s.)
[    1.837191] init: (Parsing /init.debug.rc took 0.00s.)
[    1.837214] init: (Parsing init.rockchip.rc took 0.00s.)
[    1.837934] init: (Parsing init.connectivity.rc took 0.00s.)
[    1.838078] init: (Parsing init.box.samba.rc took 0.00s.)
[    1.838231] init: (Parsing init.rk3399.rc took 0.00s.)
[    1.838436] init: init.box.rc: 25: invalid keyword 'ioprio'
[    1.838471] init: (Parsing init.box.rc took 0.00s.)
[    1.838523] init: could not import file 'init.car.rc' from '/init.rk30board.rc': No such file or directory
[    1.838565] init: could not import file 'init.optee.rc' from '/init.rk30board.rc': No such file or directory
[    1.838590] init: (Parsing /init.rk30board.rc took 0.01s.)
[    1.839650] init: (Parsing /init.usb.configfs.rc took 0.00s.)
[    1.839794] init: (Parsing /init.zygote64_32.rc took 0.00s.)
[    1.839818] init: (Parsing /init.rc took 0.01s.)
[    1.840280] init: Starting service 'ueventd'...
[    1.842202] init: write_file: Unable to open '/proc/self/coredump_filter': No such file or directory
[    1.842266] init: write_file: Unable to open '/proc/sys/kernel/panic_on_stackoverflow': No such file or directory
[    1.844958] ueventd: ueventd started!
[    1.846523] ueventd: invalid gid 'trace'
[    1.856523] mmc_host mmc1: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[    1.863922] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 110
[    1.865932] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    1.865979] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    1.893343] init: Waiting for /dev/.coldboot_done...
[    1.959385] ueventd: Coldboot took 0.11s.
[    1.964543] init: Waiting for /dev/.coldboot_done took 0.07s.
[    1.964688] init: /dev/hw_random not found
[    1.965353] keychord: using input dev ff420030.pwm for fevent
[    1.965363] keychord: using input dev rk29-keypad for fevent
[    1.970064] init: write_file: Unable to open '/proc/cpu/alignment': No such file or directory
[    1.976739] Registered swp emulation handler
[    1.976959] init: write_file: Unable to open '/sys/module/rockchip_pm/parameters/policy': No such file or directory
[    1.977474] init: /dev/hw_random not found
[    1.978388] fs_mgr: Warning: unknown flag resize
[    1.981769] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[    1.981822] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/system,target=/system,type=ext4)=0
[    1.982555] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/cache,/cache,ext4)=-1: No such file or directory
[    1.983030] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/cache
[    1.989316] random: e2fsck: uninitialized urandom read (40 bytes read, 32 bits of entropy available)
[    2.035082] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    2.035082]
[    2.035652] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/cache: recovering journal
[    2.035652]
[    2.036498] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/cache: clean, 21/8192 files, 1589/32768 blocks
[    2.036498]
[    2.040956] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    2.040998] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/cache,target=/cache,type=ext4)=0
[    2.042114] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
[    2.044010] EXT4-fs (mmcblk0p11): recovery complete
[    2.044026] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
[    2.044058] fs_mgr: check_fs(): mount(/dev/block/platform/fe330000.sdhci/by-name/metadata,/metadata,ext4)=0: Success
[    2.059402] fs_mgr: check_fs(): unmount(/metadata) succeeded
[    2.059439] fs_mgr: Running /system/bin/e2fsck on /dev/block/platform/fe330000.sdhci/by-name/metadata
[    2.060336] random: e2fsck: uninitialized urandom read (40 bytes read, 34 bits of entropy available)
[    2.075065] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    2.075065]
[    2.075100] e2fsck: /dev/block/platform/fe330000.sdhci/by-name/metadata: clean, 11/1024 files, 1102/4096 blocks
[    2.075100]
[    2.077605] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    2.077646] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/metadata,target=/metadata,type=ext4)=0
[    2.077696] fs_mgr: Running /system/bin/fsck.f2fs -a /dev/block/platform/fe330000.sdhci/by-name/userdata
[    2.078927] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory
[    2.078927]
[    2.078955] fsck.f2fs: fsck.f2fs terminated by exit(255)
[    2.078955]
[    2.132476] F2FS-fs (mmcblk0p13): recover_inode: ino = 89f, name = .temp.whAbU5
[    2.135068] F2FS-fs (mmcblk0p13): recover_dentry: ino = 89f, name = .temp.whAbU5, dir = 2c, err = 0
[    2.135121] F2FS-fs (mmcblk0p13): recover_data: ino = 89f (i_size: recover) recovered = 0, err = 0
[    2.135136] F2FS-fs (mmcblk0p13): recover_inode: ino = 8a9, name = journal35001991.tmp
[    2.135516] F2FS-fs (mmcblk0p13): recover_dentry: ino = 8a9, name = journal35001991.tmp, dir = 3e8, err = 0
[    2.135539] F2FS-fs (mmcblk0p13): recover_data: ino = 8a9 (i_size: recover) recovered = 0, err = 0
[    2.135548] F2FS-fs (mmcblk0p13): recover_inode: ino = 8a9, name = journal35001991.tmp
[    2.135561] F2FS-fs (mmcblk0p13): recover_data: ino = 8a9 (i_size: recover) recovered = 0, err = 0
[    2.135569] F2FS-fs (mmcblk0p13): recover_inode: ino = 8a9, name = journal35001991.tmp
[    2.135582] F2FS-fs (mmcblk0p13): recover_data: ino = 8a9 (i_size: recover) recovered = 0, err = 0
[    2.138074] fs_mgr: __mount(source=/dev/block/platform/fe330000.sdhci/by-name/userdata,target=/data,type=f2fs)=0
[    2.140894] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
[    2.141126] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
[    2.141314] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
[    2.141565] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
[    2.141838] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
[    2.142021] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
[    2.142201] init: (Parsing /system/etc/init/debuggerd64.rc took 0.00s.)
[    2.142399] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
[    2.142668] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
[    2.142855] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
[    2.143066] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
[    2.143256] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
[    2.143442] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
[    2.143631] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
[    2.143980] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
[    2.144186] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
[    2.144375] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
[    2.144563] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
[    2.144749] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
[    2.144972] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
[    2.145179] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
[    2.145377] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
[    2.145569] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
[    2.145753] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
[    2.145942] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
[    2.146140] init: ignored duplicate definition of service 'ril-daemon'init: (Parsing /system/etc/init/rild.rc took 0.00s.)
[    2.146371] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
[    2.146562] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
[    2.146768] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
[    2.146968] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
[    2.147208] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
[    2.148144] init: property_set("ro.board.platform", "rk3399") failed
[    2.148643] init: property_set("ro.rk.screenoff_time", "2147483647") failed
[    2.148899] init: property_set("ro.rk.screenshot_enable", "true") failed
[    2.149067] init: (Loading properties from /system/build.prop took 0.00s.)
[    2.149120] init: (Loading properties from /vendor/build.prop took 0.00s.)
[    2.149151] init: (Loading properties from /factory/factory.prop took 0.00s.)
[    2.149450] fs_mgr: Warning: unknown flag resize
[    2.149668] init: /recovery not specified in fstab
[    2.149906] init: Starting service 'healthd'...
[    2.150568] init: cannot find '/system/bin/displayd' (No such file or directory), disabling 'displayd'
[    2.151063] init: Starting service 'earlylogs'...
[    2.151789] init: Starting service 'zygote'...
[    2.151922] binder: 225:225 transaction failed 29189/-22, size 0-0 line 2951
[    2.152281] init: Starting service 'zygote_secondary'...
[    2.152880] init: Starting service 'lmkd'...
[    2.153517] init: Starting service 'servicemanager'...
[    2.154031] init: Starting service 'surfaceflinger'...
[    2.154486] init: Starting service 'vold'...
[    2.163073] vendor storage:20160801 ret = 0
[    2.164932] random: surfaceflinger: uninitialized urandom read (40 bytes read, 44 bits of entropy available)
[    2.165440] random: elogs.sh: uninitialized urandom read (40 bytes read, 44 bits of entropy available)
[    2.165667] random: app_process64: uninitialized urandom read (40 bytes read, 44 bits of entropy available)
[    2.167971] random: lmkd: uninitialized urandom read (40 bytes read, 44 bits of entropy available)
[    2.169280] random: servicemanager: uninitialized urandom read (40 bytes read, 44 bits of entropy available)
[    2.170468] random: app_process32: uninitialized urandom read (40 bytes read, 44 bits of entropy available)
[    2.172426] random: vold: uninitialized urandom read (40 bytes read, 45 bits of entropy available)
[    2.172973] init: insmod: open("/system/lib/modules/ump.ko") failed: No such file or directoryinit: Service 'earlylogs' (pid 226) exited with status 0
[    2.173217] init: insmod: open("/system/lib/modules/mali.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/mali_kbase.ko") failed: No such file or directoryinit: insmod: open("/system/lib/modules/rk30_mirroring.ko") failed: No such file or directoryinit: finit_module for "/system/lib/modules/rk29-ipp.ko" failed: Exec format errorinit: insmod: open("/system/lib/modules/pvrsrvkm.ko") failed: No such file or directoryinit: finit_module for "/drmboot.ko" failed: Exec format errorfs_mgr: Warning: unknown flag resize
[    2.176693] zram0: detected capacity change from 0 to 533413888
[    2.181442] random: mkswap: uninitialized urandom read (40 bytes read, 45 bits of entropy available)
[    2.212127] Adding 520908k swap on /dev/block/zram0.Priority:-1 extents:1 across:520908k SS
[    2.215842] init: Starting service 'debuggerd'...
[    2.216400] init: Starting service 'debuggerd64'...
[    2.219906] init: Not bootcharting.
[    2.311908] fs_mgr: Warning: unknown flag resize
[    2.422653] init: Failed to reload policy
[    2.422774] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
[    2.436419] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 247) exited with status 0
[    2.451945] init: write_file: Unable to open '/proc/sys/kernel/core_pattern': No such file or directory
[    2.453877] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[    2.456842] init: (Loading properties from /data/local.prop took 0.00s.)
[    2.457914] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[    2.471479] init: Starting service 'logd'...
[    2.472366] init: Starting service 'logd-reinit'...
[    2.473398] init: write_file: Unable to open '/proc/sys/vm/min_free_order_shift': No such file or directory
[    2.475820] init: write_file: Unable to open '/proc/sys/vm/lazy_vfree_tlb_flush_all_threshold': No such file or directory
[    2.477602] init: Starting service 'fsud'...
[    2.478993] init: Starting service 'vm_daemon'...
[    2.480251] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    2.480276] init: write: cannot expand '${ro.serialno}'
[    2.481784] file system registered
[    2.482330] using random self ethernet address
[    2.482342] using random host ethernet address
[    2.482389] init: write_file: Unable to open '/config/usb_gadget/g1/functions/rndis.gs4/wceis': Permission denied
[    2.501850] init: Starting service 'console'...
[    2.502552] init: Starting service 'adbd'...
[    2.504296] init: Starting service 'ap_log_srv'...
[    2.505097] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 2 (/system/bin/update_verifier)'
[    2.505185] init: Starting service 'ril-daemon'...
[    2.505648] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
[    2.505709] init: Starting service 'drmservice'...
[    2.506038] init: cannot find '/system/bin/bplus_helper' (No such file or directory), disabling 'bplus_helper'
[    2.506082] init: Starting service 'up_eth0'...
[    2.506572] init: cannot find '/system/bin/rk_store_keybox' (No such file or directory), disabling 'rk_store_keybox'
[    2.506700] init: Starting service 'akmd'...
[    2.507385] init: Starting service 'audioserver'...
[    2.507869] init: Starting service 'cameraserver'...
[    2.510406] init: couldn't write 274 to /dev/cpuset/camera-daemon/tasks: No such file or directory
[    2.511018] init: Starting service 'drm'...
[    2.511733] init: Starting service 'installd'...
[    2.512244] rk_gmac-dwmac fe300000.ethernet: rk_get_eth_addr: mac address: 2a:1c:dc:ef:79:88
[    2.512262] eth0: device MAC address 2a:1c:dc:ef:79:88
[    2.512970] rt5640 1-001c: Can not read propertyrk3399_firefly_aio_box:/ $hp-con-gpio
[    2.512978] rt5640 1-001c: Can not read property: linein-mute.
[    2.513224] init: Starting service 'keystore'...
[    2.513949] logd.auditd: start
[    2.514358] logd.klogd: 2512421186
[    2.515146] init: Starting service 'mediacodec'...
[    2.515895] init: Starting service 'mediadrm'...
[    2.516557] init: Starting service 'mediaextractor'...
[    2.517239] init: Starting service 'media'...
[    2.517862] init: Starting service 'netd'...
[    2.518844] init: Starting service 'crashlogd'...
[    2.519573] init: Starting service 'log-watch'...
[    2.520227] init: Starting service 'gatekeeperd'...
[    2.520861] init: Starting service 'perfprofd'...
[    2.522193] init: Service 'logd-reinit' (pid 262) exited with status 145
[    2.524057] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[    2.565347] init: Service 'up_eth0' (pid 271) exited with status 0
[    2.565460] init: Service 'akmd' (pid 272) exited with status 254
[    2.566733] ret = ffffffffffffffff
[    2.568049] init: property 'sys.serialno' doesn't exist while expanding '${sys.serialno}'
[    2.568070] init: setprop: cannot expand '${sys.serialno}'
[    2.581019] init: Service 'drmservice' (pid 270) exited with status 0
[    2.716198] read descriptors
[    2.716490] read strings
[    2.729890] init: Starting service 'apk_logfs'...
[    2.733525] init: Service 'ap_log_srv' (pid 268) exited with status 0
[    2.969720] init: Starting service 'bootanim'...
[    3.049112] Freeing drm_logo memory: 488K
[    3.087794] init: Untracked pid 354 exited with status 0
[    3.145186] init: Untracked pid 367 exited with status 0
[    3.153219] healthd: BatteryCurrentNowPath not found
[    3.153244] healthd: BatteryCycleCountPath not found
[    3.588068] E:camsys_extdev_register(258): Request RK30_PIN2_PD4(92) failed
[    3.601955] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    3.602846] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    3.620705] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    3.621865] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    3.621880] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    3.621891] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    3.621899] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    3.633137] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[    3.634867] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[    3.648531] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    3.648549] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    3.648557] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    3.648567] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    3.648575] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    3.662123] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    3.663001] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    3.697530] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    3.698478] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    3.710865] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    3.711827] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    3.711842] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    3.711855] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    3.711863] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    3.724125] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[    3.725070] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[    3.737010] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    3.737086] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    3.737095] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    3.737108] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    3.737121] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    3.748907] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    3.749784] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    3.781616] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    3.782523] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    3.796759] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    3.796794] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    3.796804] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    3.796813] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    3.796821] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    3.810818] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[    3.811677] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[    3.823302] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    3.823345] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    3.823355] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    3.823365] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    3.823373] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    3.834701] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    3.835588] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    3.911746] random: nonblocking pool is initialized
[    4.213903] init: Untracked pid 370 exited with status 1
[    4.217800] init: Untracked pid 358 exited with status 1
[    4.716036] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
[    6.922765] acc_open
[    6.922797] acc_release
[    6.968764] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[    6.970838] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[    6.973118] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[    7.224424] dwhdmi-rockchip ff940000.hdmi: failed to get edid
[    7.987953] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    7.988832] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    8.000225] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    8.000250] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    8.000262] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    8.000275] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    8.000284] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    8.011705] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[    8.011950] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[    8.022561] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    8.022585] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    8.022594] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    8.022606] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    8.022613] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    8.033967] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    8.034867] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    8.068495] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    8.069379] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    8.079917] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    8.079940] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    8.079951] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    8.079963] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    8.079971] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    8.091433] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[    8.092347] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[    8.102796] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    8.102821] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    8.102831] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    8.102841] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    8.102849] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    8.114384] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    8.114566] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    8.143706] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    8.144575] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    8.155107] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    8.155140] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    8.155153] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    8.155165] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    8.155175] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    8.166668] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[    8.167544] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[    8.177863] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[    8.177884] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[    8.177895] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[    8.177908] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[    8.177916] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[    8.188953] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[    8.189751] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[    8.292771] FastMixer: unhandled level 1 translation fault (11) at 0x000000cc, esr 0x92000005
[    8.292794] pgd = ffffffc0764ae000
[    8.292799] *pgd=0000000000000000, *pud=0000000000000000
[    8.292809]
[    8.292817] CPU: 5 PID: 373 Comm: FastMixer Not tainted 4.4.103 #1947
[    8.292823] Hardware name: AIO Board BOX (Android) (DT)
[    8.292830] task: ffffffc07bf82700 task.stack: ffffffc0703cc000
[    8.292838] PC is at 0xf1a08c02
[    8.292842] LR is at 0xf193c265
[    8.292848] pc : [<00000000f1a08c02>] lr : [<00000000f193c265>] pstate: 00070030
[    8.292854] sp : 00000000f077f4f8
[    8.292858] x12: 00000000f1960db0
[    8.292865] x11: 00000000f194ff0a x10: 0000000000000000
[    8.292875] x9 : 00000000f194fff5 x8 : 00000000f0dd2200
[    8.292884] x7 : 00000000f077f738 x6 : 00000000f077f510
[    8.292894] x5 : 00000000f0dd2268 x4 : 0000000000000000
[    8.292903] x3 : 0000000000000080 x2 : 00000000f181a33c
[    8.292912] x1 : 0000000012dfc0f1 x0 : 00000000f1a0e008
[    8.292921]
[    8.296557] binder: release 273:378 transaction 9913 in, still active
[    8.296574] binder: send failed reply for transaction 9913 to 619:689
[    8.296595] binder: release 273:691 transaction 9919 in, still active
[    8.296602] binder: send failed reply for transaction 9919 to 619:619
[    8.297127] init: Service 'audioserver' (pid 273) killed by signal 11
[    8.297168] init: Service 'audioserver' (pid 273) killing any children in process group
[    8.297561] init: Starting service 'audioserver'...
[    8.578096] init: Untracked pid 1063 exited with status 0
[    8.604566] init: Untracked pid 1071 exited with status 0
[    8.730759] init: cannot find '/system/bin/glgps' (No such file or directory), disabling 'gpsd'
[    8.730843] init: Starting service 'mode_switch'...
[    8.731784] init: Starting service 'exec 3 (/system/bin/bootstat)'...
[    8.769207] init: Service 'exec 3 (/system/bin/bootstat)' (pid 1102) exited with status 0
[    8.771377] init: Starting service 'exec 4 (/system/bin/bootstat)'...
[    8.791630] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    8.791694] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 7
[    8.795245] init: Service 'exec 4 (/system/bin/bootstat)' (pid 1111) exited with status 0
[    8.796086] init: Starting service 'exec 5 (/system/bin/bootstat)'...
[    8.796356] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[    8.796403] xhci-hcd xhci-hcd.9.auto: irq 234, io mem 0xfe800000
[    8.796561] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    8.796572] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.796580] usb usb7: Product: xHCI Host Controller
[    8.796588] usb usb7: Manufacturer: Linux 4.4.103 xhci-hcd
[    8.796596] usb usb7: SerialNumber: xhci-hcd.9.auto
[    8.797346] hub 7-0:1.0: USB hub found
[    8.797398] hub 7-0:1.0: 1 port detected
[    8.797667] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    8.797685] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 8
[    8.798492] rt5640 1-001c: Can not read property hp-con-gpio
[    8.798503] rt5640 1-001c: Can not read property: linein-mute.
[    8.798742] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    8.798857] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    8.798868] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.798877] usb usb8: Product: xHCI Host Controller
[    8.798885] usb usb8: Manufacturer: Linux 4.4.103 xhci-hcd
[    8.798892] usb usb8: SerialNumber: xhci-hcd.9.auto
[    8.801937] hub 8-0:1.0: USB hub found
[    8.802016] hub 8-0:1.0: 1 port detected
[    8.802866] rt5640 1-001c: Can not read property hp-con-gpio
[    8.802879] rt5640 1-001c: Can not read property: linein-mute.
[    8.803236] rockchip-dwc3 usb@fe800000: USB HOST connected
[    8.807531] rt5640 1-001c: Can not read property hp-con-gpio
[    8.807543] rt5640 1-001c: Can not read property: linein-mute.
[    8.810800] init: Service 'mode_switch' (pid 1100) exited with status 0
[    8.827280] init: Service 'exec 5 (/system/bin/bootstat)' (pid 1113) exited with status 0
[    8.828130] init: Starting service 'exec 6 (/system/bin/bootstat)'...
[    8.848649] init: Service 'exec 6 (/system/bin/bootstat)' (pid 1114) exited with status 0
[    9.064953] FastMixer: unhandled level 1 translation fault (11) at 0x000000cc, esr 0x92000005
[    9.064985] pgd = ffffffc049356000
[    9.064991] *pgd=0000000000000000, *pud=0000000000000000
[    9.065001]
[    9.065009] CPU: 4 PID: 1076 Comm: FastMixer Not tainted 4.4.103 #1947
[    9.065016] Hardware name: AIO Board BOX (Android) (DT)
[    9.065022] task: ffffffc05205a700 task.stack: ffffffc047a50000
[    9.065029] PC is at 0xf6950c02
[    9.065034] LR is at 0xf6864265
[    9.065039] pc : [<00000000f6950c02>] lr : [<00000000f6864265>] pstate: 00070030
[    9.065045] sp : 00000000f56ff4f8
[    9.065051] x12: 00000000f6888db0
[    9.065057] x11: 00000000f6877f0a x10: 0000000000000000
[    9.065067] x9 : 00000000f6877ff5 x8 : 00000000f5d52200
[    9.065076] x7 : 00000000f56ff738 x6 : 00000000f56ff510
[    9.065085] x5 : 00000000f5d52268 x4 : 0000000000000000
[    9.065095] x3 : 0000000000000080 x2 : 00000000f622e33c
[    9.065104] x1 : 0000000070ca981f x0 : 00000000f6956008
[    9.065113]
[    9.067338] binder: release 1041:1081 transaction 12011 in, still active
[    9.067356] binder: send failed reply for transaction 12011 to 619:689
[    9.067879] init: Service 'audioserver' (pid 1041) killed by signal 11
[    9.067916] init: Service 'audioserver' (pid 1041) killing any children in process group
[    9.108388] usb 7-1: new low-speed USB device number 2 using xhci-hcd
[    9.235043] usb 7-1: New USB device found, idVendor=093a, idProduct=2510
[    9.235079] usb 7-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.235097] usb 7-1: Product: USB Optical Mouse
[    9.235106] usb 7-1: Manufacturer: PixArt
[    9.237705] usb 7-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    9.251793] input: PixArt USB Optical Mouse as /devices/platform/usb@fe800000/fe800000.dwc3/xhci-hcd.9.auto/usb7/7-1/7-1:1.0/0003:093A:2510.0001/input/input2
[    9.252842] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse on usb-xhci-hcd.9.auto-1/input0
[    9.254868] rt5640 1-001c: Can not read property hp-con-gpio
[    9.254894] rt5640 1-001c: Can not read property: linein-mute.
[   10.547033] init: Service 'bootanim' is being killed...
[   10.656899] init: Service 'bootanim' (pid 344) killed by signal 9
[   13.660620] init: Starting service 'audioserver'...
[   13.992728] init: Untracked pid 1371 exited with status 0
[   14.037617] init: Untracked pid 1379 exited with status 0
[   14.211786] init: Untracked pid 1419 exited with status 0
[   14.250961] init: Untracked pid 1427 exited with status 0
[   14.503537] FastMixer: unhandled level 1 translation fault (11) at 0x000000cc, esr 0x92000005
[   14.503567] pgd = ffffffc04b8fb000
[   14.503572] *pgd=0000000000000000, *pud=0000000000000000
[   14.503582]
[   14.503589] CPU: 4 PID: 1384 Comm: FastMixer Not tainted 4.4.103 #1947
[   14.503596] Hardware name: AIO Board BOX (Android) (DT)
[   14.503603] task: ffffffc04ea63400 task.stack: ffffffc04ea58000
[   14.503610] PC is at 0xeb2e3c02
[   14.503615] LR is at 0xeb217265
[   14.503620] pc : [<00000000eb2e3c02>] lr : [<00000000eb217265>] pstate: 00070030
[   14.503626] sp : 00000000ea07f4f8
[   14.503631] x12: 00000000eb23bdb0
[   14.503638] x11: 00000000eb22af0a x10: 0000000000000000
[   14.503647] x9 : 00000000eb22aff5 x8 : 00000000ea6d2200
[   14.503656] x7 : 00000000ea07f738 x6 : 00000000ea07f510
[   14.503665] x5 : 00000000ea6d2268 x4 : 0000000000000000
[   14.503675] x3 : 0000000000000080 x2 : 00000000eaa8b33c
[   14.503684] x1 : 0000000013974db7 x0 : 00000000eb2e9008
[   14.503693]
[   14.507962] init: Service 'audioserver' (pid 1362) killed by signal 11
[   14.508000] init: Service 'audioserver' (pid 1362) killing any children in process group
[   15.295657] init: Untracked pid 1066 exited with status 0
[   15.297983] init: Untracked pid 1074 exited with status 0
[   15.328046] init: Untracked pid 1382 exited with status 0
[   15.328735] init: Untracked pid 1430 exited with status 0
[   15.344157] init: Untracked pid 1422 exited with status 0
[   15.353755] init: Untracked pid 1374 exited with status 0
[   18.596667] init: Starting service 'audioserver'...
[   18.958613] init: Untracked pid 1571 exited with status 0
[   19.026049] init: Untracked pid 1579 exited with status 0
[   19.375260] FastMixer: unhandled level 1 translation fault (11) at 0x000000cc, esr 0x92000005
[   19.375295] pgd = ffffffc03cbb8000
[   19.375302] *pgd=0000000000000000, *pud=0000000000000000
[   19.375314]
[   19.375324] CPU: 3 PID: 1584 Comm: FastMixer Not tainted 4.4.103 #1947
[   19.375330] Hardware name: AIO Board BOX (Android) (DT)
[   19.375337] task: ffffffc067b40d00 task.stack: ffffffc04a814000
[   19.375346] PC is at 0xe8ce9c02
[   19.375352] LR is at 0xe8c04265
[   19.375358] pc : [<00000000e8ce9c02>] lr : [<00000000e8c04265>] pstate: 00070030
[   19.375366] sp : 00000000e7a7f4f8
[   19.375371] x12: 00000000e8c28db0
[   19.375378] x11: 00000000e8c17f0a x10: 0000000000000000
[   19.375388] x9 : 00000000e8c17ff5 x8 : 00000000e80d2200
[   19.375399] x7 : 00000000e7a7f738 x6 : 00000000e7a7f510
[   19.375409] x5 : 00000000e80d2268 x4 : 0000000000000000
[   19.375419] x3 : 0000000000000080 x2 : 00000000e882433c
[   19.375434] x1 : 0000000027a61f08 x0 : 00000000e8cef008
[   19.375444]
[   19.382184] binder: release 1562:1562 transaction 23307 in, still active
[   19.382202] binder: send failed reply for transaction 23307 to 619:689
[   19.382227] binder: release 1562:1590 transaction 23551 in, still active
[   19.382235] binder: send failed reply for transaction 23551 to 295:793
[   19.382493] init: Service 'audioserver' (pid 1562) killed by signal 11
[   19.382525] init: Service 'audioserver' (pid 1562) killing any children in process group
[   19.382790] binder: 619:689 transaction failed 29189/-22, size 80-0 line 2951
[   19.514183] init: Untracked pid 1574 exited with status 0
[   19.520233] init: Untracked pid 1582 exited with status 0
[   20.702640] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   20.703544] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   20.714346] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   20.714402] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   20.714414] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   20.714426] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   20.714434] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   20.726430] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[   20.727282] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[   20.738066] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   20.738096] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   20.738109] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   20.738121] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   20.738129] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   20.753188] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   20.753995] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   20.790372] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   20.791132] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   20.801821] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   20.801861] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   20.801873] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   20.801885] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   20.801893] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   20.815985] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[   20.816854] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[   20.827590] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   20.827653] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   20.827665] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   20.827678] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   20.827687] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   20.839748] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   20.840794] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   20.883243] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   20.884072] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   20.894494] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   20.894557] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   20.894569] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   20.894581] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   20.894590] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   20.906185] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[   20.907897] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[   20.918547] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   20.918591] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   20.918603] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   20.918615] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   20.918623] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   20.930912] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   20.932002] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   23.864318] init: Starting service 'audioserver'...
[   24.129731] init: Untracked pid 1650 exited with status 0
[   24.189419] init: Untracked pid 1658 exited with status 0
[   24.341633] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   24.342498] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   24.353052] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   24.353074] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   24.353085] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   24.353098] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   24.353105] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   24.363911] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[   24.364723] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[   24.375750] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   24.375779] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   24.375789] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   24.375800] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   24.375808] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   24.386910] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   24.387726] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   24.428462] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   24.429328] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   24.443817] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   24.443851] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   24.443869] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   24.443886] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   24.443899] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   24.455089] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[   24.455892] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[   24.467443] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   24.467476] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   24.467494] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   24.467514] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   24.467528] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   24.479012] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   24.479773] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   24.520395] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   24.521238] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   24.532796] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   24.532830] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   24.532847] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   24.532863] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   24.532876] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   24.544395] E:camsys_i2c_write(84): i2c write dev(addr:0x1f) failed!,err = -6
[   24.545432] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = -6
[   24.556764] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff920000.isp; cannot claim for ff910000.isp
[   24.556800] rockchip-pinctrl pinctrl: pin-75 (ff910000.isp) status -22
[   24.556818] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkouton device rockchip-pinctrl
[   24.556835] RockChip-CamSys ff910000.isp: Error applying setting, reverse things back
[   24.556848] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[   24.568409] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[   24.569410] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[   24.592934] init: Untracked pid 1653 exited with status 0
[   24.674969] init: Untracked pid 1661 exited with status 0

zhansb 发表于 2020-9-21 18:05:30

使用行业版本的最新固件试试，不行换其他HDMI输入源，如果还不行联系售后

nero2019 发表于 2020-9-21 19:10:08

log能看到358749 I2C通吗？

nero2019 发表于 2020-9-21 19:18:10

zhansb 发表于 2020-9-21 18:05
使用行业版本的最新固件试试，不行换其他HDMI输入源，如果还不行联系售后

log能看出来I2C通了吗？

jpchen 发表于 2020-9-23 15:47:42

nero2019 发表于 2020-9-21 19:18
log能看出来I2C通了吗？

这版本的固件太旧了，建议用最新rk3399 industry7.1 版本的固件

查看完整版本: AIO3399 HDMI IN功能异常