31337401@qq.com 发表于 2021-5-6 16:13:58

rk3399 emmc启动一半卡死

请问各位,做的新板emmc启动到一半就卡死什么原因?:、
U-Boot 2017.09-ge9a3933-dirty (Apr 15 2021 - 16:25:25 +0800)

Model: Firefly-RK3399 Board
PreSerial: 2
DRAM:2 GiB
Sysmem: init
Relocation Offset is: 7dbeb000
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
get part misc fail -1
boot mode: None
Load FDT from boot part
DTB: rk-kernel.dtb
I2c speed: 400000Hz
PMIC:RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log 900000 uV
In:    serial
Out:   serial
Err:   serial
Model: Firefly-RK3399 Board (Linux Opensource)
Rockchip UBOOT DRM driver version: v1.0.1
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 24000 KHz
dpll 800000 KHz
cpll 24000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 24000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net:   No ethernet found.
Hit key to stop autoboot('CTRL+C'):0
Could not find misc partition
ANDROID: reboot reason: "(none)"
Fdt Ramdisk skip relocation
Booting IMAGE kernel at 0x00280000 with fdt at 0x8300000...


## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 11609 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image ... OK
'reserved-memory' region@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831c4fc
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
Can't find file:logo_kernel.bmp
Total: 2558.59 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.179-ga179e62-dirty (root@ubuntu) ((HEAD: a179e620b38958254c1f74d283a9cf853ae20813) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #119 SMP
Thu May 6 11:30:26 CST 2021[    0.000000] Boot CPU: AArch64 Processor
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fee0000 s45440 r8192 d32384 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 507912
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normalandroidboot.slot_suffix= androidboot.serialno=8e8ce1ab30f7a197rw roo
twait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTUUID=614e0000-0000 rootfstype=ext4 coherent_pool=1m systemd.gpt_auto=0[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] software IO TLB: mapped (0MB)
[    0.000000] Memory: 2012876K/2064384K available (7230K kernel code, 920K rwdata, 2668K rodata, 768K init, 1829K bss, 51508K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]   modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]   vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8008a30000 - 0xffffff8008af0000   (   768 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008790000   (7232 KB)
[    0.000000]   .rodata : 0xffffff8008790000 - 0xffffff8008a30000   (2688 KB)
[    0.000000]       .data : 0xffffff8008af0000 - 0xffffff8008bd6008   (   921 KB)
[    0.000000]   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (   8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
[    0.000000]   fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (4116 KB)
[    0.000000]   PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]   memory: 0xffffffc000200000 - 0xffffffc080000000   (2046 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]         Build-time adjustment of leaf fanout to 64.
[    0.000000]         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x000000000a280000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x000000000a290000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[    0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.010315] Console: colour dummy device 80x25
[    0.015213] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.026494] pid_max: default: 32768 minimum: 301
[    0.031648] Security Framework initialized
[    0.036208] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.043572] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.052113] Initializing cgroup subsys io
[    0.056533] Initializing cgroup subsys memory
[    0.061340] Initializing cgroup subsys devices
[    0.066226] Initializing cgroup subsys freezer
[    0.071110] Initializing cgroup subsys perf_event
[    0.076280] Initializing cgroup subsys pids
[    0.080897] ftrace: allocating 27026 entries in 106 pages
[    0.155805] sched-energy: Sched-energy-costs installed from DT
[    0.162225] CPU0: update cpu_capacity 401
[    0.166702] ASID allocator initialised with 32768 entries
[    0.174819] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.185001] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.196502] Detected VIPT I-cache on CPU1
[    0.196534] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.196564] CPU1: using LPI pending table @0x000000007d060000
[    0.196607] CPU1: update cpu_capacity 401
[    0.196611] CPU1: Booted secondary processor
[    0.197159] Detected VIPT I-cache on CPU2
[    0.197181] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.197209] CPU2: using LPI pending table @0x000000007d080000
[    0.197237] CPU2: update cpu_capacity 401
[    0.197240] CPU2: Booted secondary processor
[    0.197782] Detected VIPT I-cache on CPU3
[    0.197803] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.197829] CPU3: using LPI pending table @0x000000007d0e0000
[    0.197856] CPU3: update cpu_capacity 401
[    0.197859] CPU3: Booted secondary processor
[    0.198420] Detected PIPT I-cache on CPU4
[    0.198448] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.198487] CPU4: using LPI pending table @0x000000007d110000
[    0.198526] CPU4: update cpu_capacity 1024
[    0.198529] CPU4: Booted secondary processor
[    0.199088] Detected PIPT I-cache on CPU5
[    0.199106] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.199142] CPU5: using LPI pending table @0x000000007d140000
[    0.199167] CPU5: update cpu_capacity 1024
[    0.199170] CPU5: Booted secondary processor
[    0.199264] Brought up 6 CPUs
[    0.341649] SMP: Total of 6 processors activated.
[    0.346816] CPU features: detected feature: GIC system register CPU interface
[    0.354654] CPU features: detected feature: 32-bit EL0 Support
[    0.361062] CPU: All CPU(s) started at EL2
[    0.365600] alternatives: patching kernel code
[    0.371845] devtmpfs: initialized
[    0.392883] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.403598] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.410966] xor: measuring software checksum speed
[    0.425906]    8regs   :2856.000 MB/sec
[    0.439983]    8regs_prefetch:2556.000 MB/sec
[    0.454061]    32regs    :3208.000 MB/sec
[    0.468139]    32regs_prefetch:2848.000 MB/sec
[    0.473206] xor: using function: 32regs (3208.000 MB/sec)
[    0.479143] pinctrl core: initialized pinctrl subsystem
[    0.485600] NET: Registered protocol family 16
[    0.495528] cpuidle: using governor ladder
[    0.504052] cpuidle: using governor menu
[    0.508379] Registered FIQ tty driver
[    0.512571] vdso: 2 pages (1 code @ ffffff8008796000, 1 data @ ffffff8008af4000)
[    0.520715] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.528692] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.559884] console enabled
[    0.564000] pstore: Registered ramoops as persistent store backend
[    0.570786] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.579162] console enabled
[    0.579162] console enabled
[    0.586845] bootconsole disabled
[    0.586845] bootconsole disabled
[    0.595253] Registered fiq debugger ttyFIQ0
[    0.626088] raid6: int64x1gen()   468 MB/s
[    0.647223] raid6: int64x1xor()   414 MB/s
[    0.668336] raid6: int64x2gen()   675 MB/s
[    0.689436] raid6: int64x2xor()   599 MB/s
[    0.710564] raid6: int64x4gen()   980 MB/s
[    0.731648] raid6: int64x4xor()   673 MB/s
[    0.752771] raid6: int64x8gen()   781 MB/s
[    0.773865] raid6: int64x8xor()   632 MB/s
[    0.794991] raid6: neonx1   gen()   964 MB/s
[    0.816107] raid6: neonx1   xor()   669 MB/s
[    0.837252] raid6: neonx2   gen()1277 MB/s
[    0.858342] raid6: neonx2   xor()   980 MB/s
[    0.879470] raid6: neonx4   gen()1730 MB/s
[    0.900565] raid6: neonx4   xor()1214 MB/s
[    0.921682] raid6: neonx8   gen()1687 MB/s
[    0.942789] raid6: neonx8   xor()1261 MB/s
[    0.947068] raid6: using algorithm neonx4 gen() 1730 MB/s
[    0.952468] raid6: .... xor() 1214 MB/s, rmw enabled
[    0.957433] raid6: using intx1 recovery algorithm
[    0.966937] iommu: Adding device ff650000.vpu_service to group 0
[    0.973029] iommu: Adding device ff660000.rkvdec to group 1
[    0.978719] iommu: Adding device ff8f0000.vop to group 2
[    0.984124] iommu: Adding device ff900000.vop to group 3
[    0.989530] iommu: Adding device ff910000.rkisp1 to group 4
[    0.995211] iommu: Adding device ff920000.rkisp1 to group 5
[    1.001292] rk_iommu ff650800.iommu: can't get sclk
[    1.006438] rk_iommu ff660480.iommu: can't get sclk
[    1.011535] rk_iommu ff8f3f00.iommu: can't get sclk
[    1.016598] rk_iommu ff903f00.iommu: can't get sclk
[    1.021668] rk_iommu ff914000.iommu: can't get sclk
[    1.026734] rk_iommu ff924000.iommu: can't get sclk
[    1.031915] SCSI subsystem initialized
[    1.035781] usbcore: registered new interface driver usbfs
[    1.041308] usbcore: registered new interface driver hub
[    1.046721] usbcore: registered new device driver usb
[    1.051833] media: Linux media interface: v0.10
[    1.056398] Linux video capture interface: v2.00
[    1.062695] rockchip-cpuinfo cpuinfo: Serial                : 8e8ce1ab30f7a197
[    1.069128] clocksource: Switched to clocksource arch_sys_counter
[    1.112920] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    1.122063] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.130343] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.141659] Initialise system trusted keyring
[    1.153063] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.159143] ntfs: driver 2.1.32 .
[    1.163865] fuse init (API version 7.23)
[    1.168147] SGI XFS with security attributes, no debug enabled
[    1.179509] Key type asymmetric registered
[    1.183636] Asymmetric key parser 'x509' registered
[    1.188675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.196225] io scheduler noop registered
[    1.200183] io scheduler deadline registered
[    1.204506] io scheduler cfq registered (default)
[    1.210740] phy phy-ff770000.syscon:usb2-phy@e450.1: Failed to get VBUS supply regulator
[    1.220180] phy phy-ff770000.syscon:usb2-phy@e460.3: Failed to get VBUS supply regulator
[    1.234410] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.240872] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.247273] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.253633] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.260431] PCI host bridge /pcie@f8000000 ranges:
[    1.265245]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.270398]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    2.283149] pll lock timeout!
[    2.286159] phy phy-pcie-phy.7: phy poweron failed --> -22
[    2.291668] rockchip-pcie f8000000.pcie: fail to power on phy, err -22
[    2.298210] rockchip-pcie f8000000.pcie: deferred probe failed
[    2.304179] rockchip-pcie: probe of f8000000.pcie failed with error -22
[    2.311747] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    2.318403] rk-vcodec ff650000.vpu_service: probe device
[    2.324043] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    2.331707] rk-vcodec ff650000.vpu_service: could not find power_model node
[    2.338681] rk-vcodec ff650000.vpu_service: init success
[    2.344266] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    2.350573] rk-vcodec ff660000.rkvdec: probe device
[    2.355676] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    2.362512] rk-vcodec ff660000.rkvdec: could not find power_model node
[    2.369059] rk-vcodec ff660000.rkvdec: init success
[    2.375424] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.383009] dma-pl330 ff6d0000.dma-controller:         DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    2.393656] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.401240] dma-pl330 ff6e0000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    2.411638] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    2.420244] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    2.427227] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[    2.436605] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 37, base_baud = 1500000) is a 16550A
[    2.445891] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 43, base_baud = 1500000) is a 16550A
[    2.455813] Initialized drm 1.1.0 20060810
[    2.461739] Rockchip DRM driver version: v1.0.1
[    2.467248] Unable to detect cache hierarchy for CPU 0
[    2.473201] brd: module loaded
[    2.481515] loop: module loaded
[    2.485232] zram: Added device: zram0
[    2.488924] lkdtm: No crash points registered, enable through debugfs
[    2.496246] ---------spi-rockchip.c: pdev->id=0, dev_name=spi_flash(fpga1/2)
[    2.503322] rockchip-spi ff1c0000.spi: no high_speed pinctrl state
[    2.510231] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    2.517114] rockchip-spi ff1e0000.spi: no high_speed pinctrl state
[    2.524170] ---------spi-rockchip.c: pdev->id=4, dev_name=fpga1 r/w
[    2.530464] rockchip-spi ff1f0000.spi: no high_speed pinctrl state
[    2.541167] dwc3_gadget_init_hw_endpoints,num = 6
[    2.545889] dwc3_gadget_init_hw_endpoints,init 0 ep0out
[    2.551125] dwc3_gadget_init_hw_endpoints,init 2 ep1out
[    2.556365] dwc3_gadget_init_hw_endpoints,init 4 ep2out
[    2.561606] dwc3_gadget_init_hw_endpoints,init 6 ep3out
[    2.566846] dwc3_gadget_init_hw_endpoints,init 8 ep4out
[    2.572087] dwc3_gadget_init_hw_endpoints,init 10 ep5out
[    2.577411] dwc3_gadget_init_hw_endpoints,num = 7
[    2.582127] dwc3_gadget_init_hw_endpoints,init 1 ep0in
[    2.587275] dwc3_gadget_init_hw_endpoints,init 3 ep1in
[    2.592430] dwc3_gadget_init_hw_endpoints,init 5 ep2in
[    2.597585] dwc3_gadget_init_hw_endpoints,init 7 ep3in
[    2.602740] dwc3_gadget_init_hw_endpoints,init 9 ep4in
[    2.607902] dwc3_gadget_init_hw_endpoints,init 11 ep5in
[    2.613172] dwc3_gadget_init_hw_endpoints,init 13 ep6in
[    2.619179] rockchip-dwc3 usb0: fail to get drvdata hcd
[    2.848543] phy phy-ff770000.syscon:usb2-phy@e450.1: charger = USB_SDP_CHARGER
[    2.860260] rockchip-dwc3 usb1: fail to get drvdata hcd
[    2.867498] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.874114] ehci-pci: EHCI PCI platform driver
[    2.878655] ehci-platform: EHCI generic platform driver
[    2.887793] ehci-platform fe380000.usb: EHCI Host Controller
[    2.893720] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    2.901705] ehci-platform fe380000.usb: irq 26, io mem 0xfe380000
[    2.913161] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    2.919578] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.926391] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.933629] usb usb1: Product: EHCI Host Controller
[    2.938519] usb usb1: Manufacturer: Linux 4.4.179-ga179e62-dirty ehci_hcd
[    2.945322] usb usb1: SerialNumber: fe380000.usb
[    2.950599] hub 1-0:1.0: USB hub found
[    2.954465] hub 1-0:1.0: 1 port detected
[    2.962344] ehci-platform fe3c0000.usb: EHCI Host Controller
[    2.968215] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    2.976162] ehci-platform fe3c0000.usb: irq 28, io mem 0xfe3c0000
[    2.988148] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    2.994480] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.001280] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.008508] usb usb2: Product: EHCI Host Controller
[    3.013401] usb usb2: Manufacturer: Linux 4.4.179-ga179e62-dirty ehci_hcd
[    3.020193] usb usb2: SerialNumber: fe3c0000.usb
[    3.025293] hub 2-0:1.0: USB hub found
[    3.029087] hub 2-0:1.0: 1 port detected
[    3.033627] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.039843] ohci-platform: OHCI generic platform driver
[    3.045403] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    3.052277] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    3.060217] ohci-platform fe3a0000.usb: irq 27, io mem 0xfe3a0000
[    3.121286] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.128084] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.135322] usb usb3: Product: Generic Platform OHCI controller
[    3.141247] usb usb3: Manufacturer: Linux 4.4.179-ga179e62-dirty ohci_hcd
[    3.148038] usb usb3: SerialNumber: fe3a0000.usb
[    3.153109] hub 3-0:1.0: USB hub found
[    3.156907] hub 3-0:1.0: 1 port detected
[    3.161416] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    3.168319] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    3.176232] ohci-platform fe3e0000.usb: irq 29, io mem 0xfe3e0000
[    3.237268] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.244066] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.251292] usb usb4: Product: Generic Platform OHCI controller
[    3.257215] usb usb4: Manufacturer: Linux 4.4.179-ga179e62-dirty ohci_hcd
[    3.264030] usb usb4: SerialNumber: fe3e0000.usb
[    3.269088] hub 4-0:1.0: USB hub found
[    3.272887] hub 4-0:1.0: 1 port detected
[    3.277819] usbcore: registered new interface driver cdc_acm
[    3.283493] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.291542] usbcore: registered new interface driver cdc_wdm
[    3.297252] usbcore: registered new interface driver uas
[    3.302667] usbcore: registered new interface driver usb-storage
[    3.308752] usbcore: registered new interface driver usbserial
[    3.314621] usbcore: registered new interface driver usbserial_generic
[    3.321188] usbserial: USB Serial support registered for generic
[    3.327236] usbcore: registered new interface driver ch341
[    3.332750] usbserial: USB Serial support registered for ch341-uart
[    3.339060] usbcore: registered new interface driver cp210x
[    3.344666] usbserial: USB Serial support registered for cp210x
[    3.350650] usbcore: registered new interface driver ftdi_sio
[    3.356426] usbserial: USB Serial support registered for FTDI USB Serial Device
[    3.363873] usbcore: registered new interface driver keyspan
[    3.369569] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    3.377432] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    3.384767] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    3.392099] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    3.399449] usbcore: registered new interface driver option
[    3.405059] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.412205] usbcore: registered new interface driver oti6858
[    3.417900] usbserial: USB Serial support registered for oti6858
[    3.423944] usbcore: registered new interface driver pl2303
[    3.429571] usbserial: USB Serial support registered for pl2303
[    3.435541] usbcore: registered new interface driver qcserial
[    3.441318] usbserial: USB Serial support registered for Qualcomm USB modem
[    3.448331] usbcore: registered new interface driver sierra
[    3.453938] usbserial: USB Serial support registered for Sierra USB modem
[    3.461008] .. rk pwm remotectl v1.1 init
[    3.465274] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    3.473383] i2c /dev entries driver
[    3.478321] rk808 0-001b: Pmic Chip id: 0x0
[    3.485927] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    3.492187] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    3.498482] DCDC_REG1: supplied by vcc3v3_sys
[    3.503656] DCDC_REG2: supplied by vcc3v3_sys
[    3.508646] DCDC_REG3: supplied by vcc3v3_sys
[    3.513364] DCDC_REG4: supplied by vcc3v3_sys
[    3.518243] LDO_REG1: supplied by vcc3v3_sys
[    3.523681] LDO_REG2: supplied by vcc3v3_sys
[    3.528986] LDO_REG3: supplied by vcc3v3_sys
[    3.534316] LDO_REG4: supplied by vcc3v3_sys
[    3.539615] LDO_REG5: supplied by vcc3v3_sys
[    3.544921] LDO_REG6: supplied by vcc3v3_sys
[    3.550242] LDO_REG7: supplied by vcc3v3_sys
[    3.555550] LDO_REG8: supplied by vcc3v3_sys
[    3.560867] SWITCH_REG1: supplied by vcc3v3_sys
[    3.565734] SWITCH_REG2: supplied by vcc3v3_sys
[    3.573673] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    3.580829] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009048000
[    3.588810] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff800904a000
[    3.596872] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff800904c000
[    3.604786] rk3x-i2c ff140000.i2c: Initialized RK3xxx I2C bus at ffffff800904e000
[    3.612858] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009050000
[    3.621405] IR NEC protocol handler initialized
[    3.626529] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.04
[    3.632911] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[    3.639378] ---------rkisp1_register_isp_subdev
[    3.643922] ---------run rkisp1_isp_sd_init_default_fmt
[    3.649155] ---------rkisp1_isp_sd_init_default_fmt -->out_fmt.fmt_type=2
[    3.657162] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.04
[    3.663538] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[    3.669999] ---------rkisp1_register_isp_subdev
[    3.674542] ---------run rkisp1_isp_sd_init_default_fmt
[    3.679775] ---------rkisp1_isp_sd_init_default_fmt -->out_fmt.fmt_type=2
[    3.687679] usbcore: registered new interface driver uvcvideo
[    3.693440] USB Video Class driver (1.1.1)
[    3.699442] Boot mode: coldboot
[    3.703679] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    3.712618] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[    3.720559] cpu cpu0: bin=1
[    3.723415] cpu cpu0: leakage=20
[    3.738780] cpu cpu0: temp=40555, pvtm=141616 (141731 + -115)
[    3.744760] cpu cpu0: pvtm-volt-sel=0
[    3.748487] cpu cpu0: bin-scale=34
[    3.752224] cpu cpu4: bin=1
[    3.755077] cpu cpu4: leakage=31
[    3.758361] cpu cpu4: Failed to get reg
[    3.762217] cpu cpu4: bin-scale=17
[    3.766667] cpu cpu0: avs=0
[    3.769571] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[    3.776557] cpu cpu0: failed to find power_model node
[    3.782033] cpu cpu4: Failed to set regulator for cpu4: -517
[    3.787944] cpu cpu5: Failed to set regulator for cpu5: -517
[    3.794370] sdhci: Secure Digital Host Controller Interface driver
[    3.800560] sdhci: Copyright(c) Pierre Ossman
[    3.804932] Synopsys Designware Multimedia Card Interface Driver
[    3.811912] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    3.819181] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    3.825983] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    3.831774] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
[    3.841552] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.850136] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    3.857760] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    3.876474] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.896415] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    3.902641] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.910106] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    3.916124] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    3.949322] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[    3.957995] hidraw: raw HID events driver (C) Jiri Kosina
[    3.963909] usbcore: registered new interface driver usbhid
[    3.969512] usbhid: USB HID core driver
[    3.973533] inv_mpu_iio: inv_mpu_init:746
[    3.980551] mipi_csi_raw 2-0036: driver version: 00.01.01
[    3.986383] mipi_csi_raw 2-0036: could not get default pinstate
[    3.992319] mipi_csi_raw 2-0036: could not get sleep pinstate
[    4.000071] mipi_csi_raw 2-0036: grgbanking mipi_csi_raw port
[    4.006768] ---------rkisp1.c: fmt->code=0x3001
[    4.011316] ---------dev.c: fmt.format.code =MEDIA_BUS_FMT_SBGGR8_1X8
[    4.017756] ---------rkisp1.c: fmt->code=0x3001
[    4.022291] ---------dev.c: w=512,h=34,isp_ver=0
[    4.026913] ---------dev.c: RKISP1_STREAM_MP->V4L2_PIX_FMT_SBGGR8
[    4.033022] ---------dev.c: RKISP1_STREAM_SP->V4L2_PIX_FMT_YUYV
[    4.038946] rkisp1: Async subdev notifier completed
[    4.043856] ---------mipi_csi_raw.c->runtime_suspend
[    4.048911] mipi_csi_raw 2-0046: driver version: 00.01.01
[    4.054435] mipi_csi_raw 2-0046: Failed to init controls(-34)
[    4.062009] mipi_csi_raw 2-0046: grgbanking mipi_csi_raw port
[    4.068908] ---------rkisp1.c: fmt->code=0x3001
[    4.073460] ---------dev.c: fmt.format.code =MEDIA_BUS_FMT_SBGGR8_1X8
[    4.079905] ---------rkisp1.c: fmt->code=0x3001
[    4.084444] ---------dev.c: w=800,h=4800,isp_ver=0
[    4.089247] ---------dev.c: RKISP1_STREAM_MP->V4L2_PIX_FMT_SBGGR8
[    4.095351] ---------dev.c: RKISP1_STREAM_SP->V4L2_PIX_FMT_YUYV
[    4.101277] rkisp1: Async subdev notifier completed
[    4.106259] ---------mipi_csi_raw.c->runtime_suspend
[    4.111607] Registered cp15_barrier emulation handler
[    4.116800] Registered setend emulation handler
[    4.122260] Loading compiled-in X.509 certificates
[    4.123205] mmc1: new HS400 MMC card at address 0001
[    4.124280] mmcblk1: mmc1:0001 Biwin6.96 GiB
[    4.125163] mmcblk1boot0: mmc1:0001 Biwinpartition 1 4.00 MiB
[    4.126015] mmcblk1boot1: mmc1:0001 Biwinpartition 2 4.00 MiB
[    4.126918] mmcblk1rpmb: mmc1:0001 Biwinpartition 3 4.00 MiB
[    4.130567]mmcblk1: p1 p2 p3 p4 p5
[    4.160517] Btrfs loaded
[    4.164221] rga2: Driver loaded successfully ver:3.02
[    4.169589] rga2: Module initialized.
[    4.179334] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    4.185546] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 5
[    4.193398] xhci-hcd xhci-hcd.4.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    4.202152] xhci-hcd xhci-hcd.4.auto: irq 238, io mem 0xfe800000
[    4.208363] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    4.215163] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.222390] usb usb5: Product: xHCI Host Controller
[    4.227276] usb usb5: Manufacturer: Linux 4.4.179-ga179e62-dirty xhci-hcd
[    4.234068] usb usb5: SerialNumber: xhci-hcd.4.auto
[    4.239911] hub 5-0:1.0: USB hub found
[    4.243740] hub 5-0:1.0: 1 port detected
[    4.247987] xhci-hcd xhci-hcd.4.auto: xHCI Host Controller
[    4.253766] xhci-hcd xhci-hcd.4.auto: new USB bus registered, assigned bus number 6
[    4.261503] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.269695] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    4.276495] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.283722] usb usb6: Product: xHCI Host Controller
[    4.288608] usb usb6: Manufacturer: Linux 4.4.179-ga179e62-dirty xhci-hcd
[    4.295399] usb usb6: SerialNumber: xhci-hcd.4.auto
[    4.300852] hub 6-0:1.0: USB hub found
[    4.304664] hub 6-0:1.0: 1 port detected
[    4.308959] dwc3_gadget_init_hw_endpoints,num = 6
[    4.313689] dwc3_gadget_init_hw_endpoints,init 0 ep0out
[    4.318930] dwc3_gadget_init_hw_endpoints,init 2 ep1out
[    4.324177] dwc3_gadget_init_hw_endpoints,init 4 ep2out
[    4.329423] dwc3_gadget_init_hw_endpoints,init 6 ep3out
[    4.334663] dwc3_gadget_init_hw_endpoints,init 8 ep4out
[    4.339904] dwc3_gadget_init_hw_endpoints,init 10 ep5out
[    4.345248] dwc3_gadget_init_hw_endpoints,num = 7
[    4.349974] dwc3_gadget_init_hw_endpoints,init 1 ep0in
[    4.355136] dwc3_gadget_init_hw_endpoints,init 3 ep1in
[    4.360292] dwc3_gadget_init_hw_endpoints,init 5 ep2in
[    4.365447] dwc3_gadget_init_hw_endpoints,init 7 ep3in
[    4.370603] dwc3_gadget_init_hw_endpoints,init 9 ep4in
[    4.375758] dwc3_gadget_init_hw_endpoints,init 11 ep5in
[    4.380998] dwc3_gadget_init_hw_endpoints,init 13 ep6in
[    4.387151] xhci-hcd xhci-hcd.4.auto: remove, state 1
[    4.391521] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    4.391711] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 7
[    4.391860] xhci-hcd xhci-hcd.5.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    4.391903] xhci-hcd xhci-hcd.5.auto: irq 239, io mem 0xfe900000
[    4.392107] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    4.392113] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.392138] usb usb7: Product: xHCI Host Controller
[    4.392142] usb usb7: Manufacturer: Linux 4.4.179-ga179e62-dirty xhci-hcd
[    4.392147] usb usb7: SerialNumber: xhci-hcd.5.auto
[    4.392624] hub 7-0:1.0: USB hub found
[    4.392649] hub 7-0:1.0: 1 port detected
[    4.392938] xhci-hcd xhci-hcd.5.auto: xHCI Host Controller
[    4.393073] xhci-hcd xhci-hcd.5.auto: new USB bus registered, assigned bus number 8
[    4.393164] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    4.393251] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    4.393256] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.393260] usb usb8: Product: xHCI Host Controller
[    4.393265] usb usb8: Manufacturer: Linux 4.4.179-ga179e62-dirty xhci-hcd
[    4.393268] usb usb8: SerialNumber: xhci-hcd.5.auto
[    4.393728] hub 8-0:1.0: USB hub found
[    4.393757] hub 8-0:1.0: 1 port detected
[    4.463803] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:09 UTC (1358499009)
[    4.480788] vcc_sd: disabling
[    4.480796] vcc_mipi: disabling
[    4.480800] dvdd_1v2: disabling
u?    4.484142]
[    4.539775] usb usb6: USB disconnect, device number 1
[    4.568823] xhci-hcd xhci-hcd.4.auto: Host not halted after 16000 microseconds.
[    4.576130] xhci-hcd xhci-hcd.4.auto: Host controller not halted, aborting reset.
[    4.583629] xhci-hcd xhci-hcd.4.auto: USB bus 6 deregistered

dioonie 发表于 2022-4-19 16:32:50

也出现同样问题,楼主解决吗?

linfans 发表于 2022-4-29 16:20:25

解决了吗
页: [1]
查看完整版本: rk3399 emmc启动一半卡死