saveu 发表于 2021-5-12 12:33:25

RK3399标准板Build IMG,更换emmc后无法进入Ubuntu

本帖最后由 saveu 于 2021-5-13 10:13 编辑

硬件:
Firefly-RK3399
2GB/16GB V15 , 20/12
https://www.t-firefly.com/product/rk3399.html

目的:

[*]Ubuntu系统放入TF卡, 系统从TF卡启动, EMMC当着从盘,在Ubuntu下对emmc进行测试操作
[*]我们需要修改kernel的部分emmc driver 重新build IMG

IMG准备:
IMG_RK : ROC-RK3399-PC-UBUNTU18.04-GPT-SDBOOT-20200507-1505.img//之前rk官方下载的
IMG_DIY: ROC-RK3399-PC-UBUNTU-ROOTFS-GPT-20210512-1129.img//自己build的IMG

IMG_DIY制作步骤:

[*]按照WIKI搭建环境
[*]./build.sh roc-rk3399-pc-ubuntu.mk
[*]./build.sh 后生成IMG_DIY
[*]通过TF卡制作SD启动

TF卡制作:
IMG_RK ----通过Etcher工具 Flash
IMG_DIY----通过SD_Firmware_Tool.exe (SD_Firmware_Tool_v1.59) > "SD启动" > "创建"

测试结果:
IMG_RK
原板 RK3399 > OK
更换EMMC RK3399 > OK
去掉EMMC RK3399 > OK

IMG_DIY
原板 RK3399 > OK
更换EMMC RK3399 > Fail
去掉EMMC RK3399 > OK

问题:
更换EMMC RK3399 > Fail , 为什么build出来额IMG_DIY, 在更换EMMC后,无法启动呢,串口log在下面这行 就停止了
"rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1"

但是官方下的 IMG_RK 又没问题, 现在就想知道官方IMG_RK 是如何制作的呢?非常感谢!!!!!

日志:
DIY_IMG_build.log
DIY_IMG_更换EMMC_RK3399.log         //这就是出问题的log, 卡在最后一行不动
DIY_IMG_原板_RK3399.log
RK_IMG_更换EMCC_RK3399.log

make环境:
根据官方wiki git最新
root@bw-MS-7C52:~/rk3399/rk3399_linux_release_v2.5.1_20210301# uname -r
5.8.0-50-generic
root@bw-MS-7C52:~/rk3399/rk3399_linux_release_v2.5.1_20210301# lsb_release -a
No LSB modules are available.
Distributor ID:      Ubuntu
Description:      Ubuntu 20.04.2 LTS
Release:      20.04
Codename:      focal

rootfs:
ubuntu_18.04_arm64_ext4_v2.04-1-g618089a_20210316-1035_DESKTOP.img.7z //官方下载的
rootfs.img //从IMG_RK提取的rootfs.img 也是同样的问题

解决办法1: 希望可以给出 IMG_RK build的详细方法
解决办法2: 可以根据DIY_IMG_更换EMMC_RK3399.log 定位为什么卡住,而不load Ubuntu.



saveu 发表于 2021-5-12 12:37:37

DIY_IMG_build.log


root@bw-MS-7C52:~/rk3399/rk3399_linux_release_v2.5.1_20210301# ./build.sh roc-rk3399-pc-ubuntu.mk
processing option: roc-rk3399-pc-ubuntu.mk
switching to board: /root/rk3399/rk3399_linux_release_v2.5.1_20210301/device/rockchip/rk3399/roc-rk3399-pc-ubuntu.mk
root@bw-MS-7C52:~/rk3399/rk3399_linux_release_v2.5.1_20210301# ./build.sh
processing option: allff
============================================
TARGET_ARCH=arm64
TARGET_PLATFORM=rk3399
TARGET_UBOOT_CONFIG=roc-rk3399-pc
TARGET_SPL_CONFIG=
TARGET_KERNEL_CONFIG=firefly_roc-rk3399-pc_defconfig
TARGET_KERNEL_DTS=rk3399-roc-pc
TARGET_TOOLCHAIN_CONFIG=
TARGET_BUILDROOT_CONFIG=
TARGET_RECOVERY_CONFIG=
TARGET_PCBA_CONFIG=rockchip_rk3399_pcba
TARGET_RAMBOOT_CONFIG=
============================================
============Start building uboot============
TARGET_UBOOT_CONFIG=roc-rk3399-pc
=========================================
## make roc-rk3399-pc_defconfig -j8
#
# configuration written to .config
#
scripts/kconfig/conf--silentoldconfig Kconfig
CHK   include/config.h
CFG   u-boot.cfg
GEN   include/autoconf.mk.dep
CFG   spl/u-boot.cfg
CFG   tpl/u-boot.cfg
GEN   include/autoconf.mk
GEN   spl/include/autoconf.mk
GEN   tpl/include/autoconf.mk
CHK   include/config/uboot.release
CHK   include/generated/timestamp_autogenerated.h
UPD   include/generated/timestamp_autogenerated.h
CHK   include/config.h
CFG   u-boot.cfg
CHK   include/generated/version_autogenerated.h
CHK   include/generated/generic-asm-offsets.h
CHK   include/generated/asm-offsets.h
HOSTCCtools/mkenvimage.o
HOSTCCtools/fit_image.o
HOSTCCtools/image-host.o
HOSTCCtools/dumpimage.o
HOSTCCtools/mkimage.o
HOSTCCtools/rockchip/boot_merger.o
HOSTCCtools/rockchip/loaderimage.o
HOSTLDtools/loaderimage
HOSTLDtools/mkenvimage
HOSTLDtools/dumpimage
HOSTLDtools/mkimage
tools/rockchip/boot_merger.c: In function ‘main’:
tools/rockchip/boot_merger.c:895:11: warning: array subscript 20 is outside array bounds of ‘char’ [-Warray-bounds]
895 |str = 0;
      |~~~~~~~~~^~~
tools/rockchip/boot_merger.c:933:7: note: while referencing ‘name’
933 |char name;
      |       ^~~~
HOSTLDtools/boot_merger
CC      arch/arm/cpu/armv8/fwcall.o
LD      arch/arm/cpu/armv8/built-in.o
CC      cmd/version.o
CC      common/main.o
LD      cmd/built-in.o
LD      common/built-in.o
CC      drivers/usb/gadget/f_fastboot.o
CC      lib/smbios.o
CC      lib/display_options.o
CC      lib/efi_loader/helloworld.o
LD      lib/efi_loader/helloworld.so
OBJCOPY lib/efi_loader/helloworld.efi
LD      lib/built-in.o
LD      drivers/usb/gadget/built-in.o
LD      u-boot
OBJCOPY u-boot.srec
OBJCOPY u-boot-nodtb.bin
SYM   u-boot.sym
start=$(/root/rk3399/rk3399_linux_release_v2.5.1_20210301/prebuilts/gcc/linux-x86/aarch64/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-nm u-boot | grep __rel_dyn_start | cut -f 1 -d ' '); end=$(/root/rk3399/rk3399_linux_release_v2.5.1_20210301/prebuilts/gcc/linux-x86/aarch64/gcc-linaro-6.3.1-2017.05-x86_64_aarch64-linux-gnu/bin/aarch64-linux-gnu-nm u-boot | grep __rel_dyn_end | cut -f 1 -d ' '); tools/relocate-rela u-boot-nodtb.bin 0x00200000 $start $end
make: 'arch/arm/dts/rk3399-roc-pc.dtb' is up to date.
CAT   u-boot-dtb.bin
MKIMAGE u-boot.img
COPY    u-boot.dtb
MKIMAGE u-boot-dtb.img
COPY    u-boot.bin
ALIGN   u-boot.bin
CC      spl/common/spl/spl.o
CC      spl/arch/arm/cpu/armv8/fwcall.o
CC      tpl/arch/arm/mach-rockchip/tpl.o
COPY    spl/u-boot-spl.dtb
LD      spl/arch/arm/cpu/armv8/built-in.o
LD      tpl/arch/arm/mach-rockchip/built-in.o
CC      tpl/arch/arm/cpu/armv8/fwcall.o
CC      spl/lib/display_options.o
LD      spl/common/spl/built-in.o
LD      tpl/arch/arm/cpu/armv8/built-in.o
CC      tpl/common/spl/spl.o
LD      spl/lib/built-in.o
COPY    tpl/u-boot-tpl.dtb
LD      tpl/common/spl/built-in.o
CC      tpl/lib/display_options.o
LD      tpl/lib/built-in.o
LD      spl/u-boot-spl
OBJCOPY spl/u-boot-spl-nodtb.bin
CAT   spl/u-boot-spl-dtb.bin
COPY    spl/u-boot-spl.bin
LD      tpl/u-boot-tpl
OBJCOPY tpl/u-boot-tpl-nodtb.bin
CAT   tpl/u-boot-tpl-dtb.bin
COPY    tpl/u-boot-tpl.bin
CFGCHKu-boot.cfg

load addr is 0x200000!
pack input u-boot.bin
pack file size: 929944(908 KB)
crc = 0xed40bf73
uboot version: U-Boot 2017.09-gc56bc3a030 #root (May 12 2021 - 11:29:17)
pack uboot.img success!
pack uboot okay! Input: u-boot.bin
out:trust.img
merge success(trust.img)
/root/rk3399/rk3399_linux_release_v2.5.1_20210301/u-boot
pack trust okay! Input: /root/rk3399/rk3399_linux_release_v2.5.1_20210301/rkbin/RKTRUST/RK3399TRUST.ini
out:rk3399_loader_v1.24.126.bin
fix opt:rk3399_loader_v1.24.126.bin
merge success(rk3399_loader_v1.24.126.bin)
/root/rk3399/rk3399_linux_release_v2.5.1_20210301/u-boot
pack rk3399_loader_v1.24.126.bin okay! Input: /root/rk3399/rk3399_linux_release_v2.5.1_20210301/rkbin/RKBOOT/RK3399MINIALL.ini

Platform RK3399 is build OK, with new .config(make roc-rk3399-pc_defconfig -j8)
Running build_uboot succeeded.
Skipping build_loader for missing configs:RK_LOADER_BUILD_TARGET.
============Start building kernel============
TARGET_ARCH          =arm64
TARGET_KERNEL_CONFIG =firefly_roc-rk3399-pc_defconfig
TARGET_KERNEL_DTS    =rk3399-roc-pc
TARGET_KERNEL_CONFIG_FRAGMENT =
==========================================
/root/rk3399/rk3399_linux_release_v2.5.1_20210301
#
# configuration written to .config
#
scripts/kconfig/conf--silentoldconfig Kconfig
CHK   include/config/kernel.release
CHK   include/generated/uapi/linux/version.h
CHK   scripts/mod/devicetable-offsets.h
DTC   arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtb
CHK   include/generated/utsrelease.h
CHK   include/generated/timeconst.h
CHK   include/generated/bounds.h
CHK   include/generated/asm-offsets.h
CALL    scripts/checksyscalls.sh
make: 'include/generated/vdso-offsets.h' is up to date.
CHK   include/generated/compile.h
make: 'arch/arm64/boot/Image.lz4' is up to date.
Image:kernel.img is ready
CHK   include/config/kernel.release
CHK   include/generated/uapi/linux/version.h
CHK   scripts/mod/devicetable-offsets.h
CHK   include/generated/utsrelease.h
CHK   include/generated/timeconst.h
CHK   include/generated/bounds.h
CHK   include/generated/asm-offsets.h
CALL    scripts/checksyscalls.sh
make: 'include/generated/vdso-offsets.h' is up to date.
Building modules, stage 2.
MODPOST 11 modules
Image:resource.img (with rk3399-roc-pc.dtb logo.bmp ) is ready
Image:boot.img (with Image ramdisk.img resource.img) is ready
Image:zboot.img (with Image.lz4 ramdisk.img resource.img) is ready
Running build_kernel succeeded.
Skipping build_toolchain for missing configs:RK_CFG_TOOLCHAIN.
Skipping build_buildroot for missing configs:RK_CFG_BUILDROOT.
buildroot/output//images/rootfs.ext4 not generated?
Running build_rootfs succeeded.
==========Start building recovery==========
TARGET_RECOVERY_CONFIG=
========================================
config is
use prebuilt recovery-arm64.cpio.gz for CPIO image
found kernel image
pack recovery.img...done.
you take 0:00.11 to build recovery
====Build recovery ok!====
Running build_recovery succeeded.
Skipping build_ramboot for missing configs:RK_CFG_RAMBOOT.
Running build_all succeeded.
/usr/bin/fakeroot
create rootfs.img...done.
create parameter...done.
/root/rk3399/rk3399_linux_release_v2.5.1_20210301/device/rockchip/rk3399/parameter-ubuntu.txt
0x00002000@0x00004000(uboot),0x00002000@0x00006000(trust),0x00002000@0x00008000(misc),0x00010000@0x0000a000(boot),0x00010000@0x0001a000(recovery),0x00010000@0x0002a000(backup),0x00600000@0x0005a000(rootfs),-@0x0065a000(userdata:grow)
create misc.img...done.
warning:   not found!
create uboot.img...done.
create trust.img...done.
create loader...done.
create boot.img...done.
Image: image in rockdev is ready
Make image ok!
File name isROC-RK3399-PC-UBUNTU-ROOTFS-GPT
Rename the file? N
Make update.img
start to make update.img...
Resize rootfs partition size
dumpe2fs 1.45.5 (07-Jan-2020)
Android Firmware Package Tool v1.66
------ PACKAGE ------
Add file: ./package-file
Add file: ./package-file done,offset=0x800,size=0x136,userspace=0x1
Add file: ./Image/MiniLoaderAll.bin
Add file: ./Image/MiniLoaderAll.bin done,offset=0x1000,size=0x5f94e,userspace=0xc0
Add file: ./Image/parameter.txt
Add file: ./Image/parameter.txt done,offset=0x61000,size=0x1ec,userspace=0x1
Add file: ./Image/trust.img
Add file: ./Image/trust.img done,offset=0x61800,size=0x400000,userspace=0x800
Add file: ./Image/uboot.img
Add file: ./Image/uboot.img done,offset=0x461800,size=0x400000,userspace=0x800
Add file: ./Image/boot.img
Add file: ./Image/boot.img done,offset=0x861800,size=0x1bae800,userspace=0x375d
Add file: ./Image/misc.img
Add file: ./Image/misc.img done,offset=0x2410000,size=0xc000,userspace=0x18
Add file: ./Image/recovery.img
Add file: ./Image/recovery.img done,offset=0x241c000,size=0x1bc8800,userspace=0x3791
Add file: ./Image/rootfs.img
Add file: ./Image/rootfs.img done,offset=0x3fe4800,size=0xb86fbe00,userspace=0x170df8
Add CRC...
Make firmware OK!
------ OK ------
********RKImageMaker ver 1.66********
Generating new image, please wait...
Writing head info...
Writing boot file...
Writing firmware...
Generating MD5 data...
MD5 data generated successfully!
New image generated successfully!
Making ./Image/update.img OK.
Make update image ok!
/root/rk3399/rk3399_linux_release_v2.5.1_20210301/rockdev/pack/ROC-RK3399-PC-UBUNTU-ROOTFS-GPT-20210512-1129.img
Running build_updateimg succeeded.
root@bw-MS-7C52:~/rk3399/rk3399_linux_release_v2.5.1_20210301#

saveu 发表于 2021-5-12 12:40:07

DIY_IMG_更换EMMC_RK3399.log

DDR Version 1.24 20191016
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg = 0x32817281, stride = 0x9
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 337
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=60906MB
FwPartOffset=2000 , 0
run on sd0
StorageInit ok = 78195
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:0, name:            uboot, start:0x4000, size:0x2000
GPT part:1, name:            trust, start:0x6000, size:0x2000
GPT part:2, name:             misc, start:0x8000, size:0x2000
GPT part:3, name:             boot, start:0xa000, size:0x10000
GPT part:4, name:         recovery, start:0x1a000, size:0x10000
GPT part:5, name:         backup, start:0x2a000, size:0x10000
GPT part:6, name:         rootfs, start:0x5a000, size:0x5dbe00
GPT part:7, name:         userdata, start:0x635e00, size:0x70bf1df
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xe3098
RunBL31 0x40000 @ 244566 us
NOTICE:BL31: v1.3(release):845ee93
NOTICE:BL31: Built : 15:51:11, Jul 22 2020
NOTICE:BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-266-gee81607c #1 Mon Aug 17 09:23:30 UTC 2020 aarch64)

INF TEE-CORE:init_primary_helper:338: Release version: 1.2

INF TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-gc56bc3a030 #root (May 12 2021 - 11:29:17 +0800)

Model: ROC-RK3399-PC Board
PreSerial: 2
DRAM:2 GiB
Sysmem: init
Relocation Offset: 7dbec000, fdt: 7bdd5728
I2c0 speed: 400000Hz
PMIC:RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log init 1100000 uV
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
Using default environment

In:    serial
Out:   serial
Err:   serial
Model: ROC-RK3399-PC Board
switch to partitions #0, OK
mmc1 is current device
Found IDB in SDcard
Bootdev(atags): mmc 1
MMC1: Legacy, 50Mhz
PartType: EFI
boot mode: None
Found DTB in boot part
Rockchip UBOOT DRM driver version: v1.0.1
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 816000 KHz
dpll 800000 KHz
cpll 24000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 24000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):0
ANDROID: reboot reason: "(none)"
DTB: rk-kernel.dtb
HASH(c): OK
Android header version 0
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 19455 KiB
RAM disk load addr 0x0a200000 size 8657 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831cade
No file: logo_kernel.bmp
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
Total: 2982.540 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.194-g50f0a60241aa-dirty (root@bw-MS-7C52) (firefly: 50f0a60241aa6c9af65d5bdbdaae40df4cd77be3) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #6 SMP Tue May 11 17:10:44 CST 2021
[    0.000000] Boot CPU: AArch64 Processor
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fedf000 s46312 r8192 d31512 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 507912
[    0.000000] Kernel command line: storagemedia=sd androidboot.storagemedia=sd androidboot.mode=normalandroidboot.slot_suffix= androidboot.serialno=e76abd2425d6bcefro rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] software IO TLB: mapped (0MB)
[    0.000000] Memory: 1996272K/2064384K available (11902K kernel code, 1662K rwdata, 4688K rodata, 1152K init, 1920K bss, 68112K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]   modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]   vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff80090c0000 - 0xffffff80091e0000   (1152 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008c20000   ( 11904 KB)
[    0.000000]   .rodata : 0xffffff8008c20000 - 0xffffff80090c0000   (4736 KB)
[    0.000000]       .data : 0xffffff80091e0000 - 0xffffff800937f808   (1663 KB)
[    0.000000]   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (   8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
[    0.000000]   fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (4116 KB)
[    0.000000]   PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]   memory: 0xffffffc000200000 - 0xffffffc080000000   (2046 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]Build-time adjustment of leaf fanout to 64.
[    0.000000]RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @7d480000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x000000007d410000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x000000007d420000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[    0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002200] Console: colour dummy device 80x25
[    0.002639] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003626] pid_max: default: 32768 minimum: 301
[    0.004144] Security Framework initialized
[    0.004605] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005245] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.006589] Initializing cgroup subsys io
[    0.006994] Initializing cgroup subsys memory
[    0.007432] Initializing cgroup subsys devices
[    0.007862] Initializing cgroup subsys freezer
[    0.008301] Initializing cgroup subsys perf_event
[    0.008756] Initializing cgroup subsys net_prio
[    0.009192] Initializing cgroup subsys pids
[    0.009622] ftrace: allocating 44598 entries in 175 pages
[    0.115528] sched-energy: Sched-energy-costs installed from DT
[    0.116091] CPU0: update cpu_capacity 401
[    0.116532] ASID allocator initialised with 32768 entries
[    0.120155] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.121491] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.123684] Detected VIPT I-cache on CPU1
[    0.123713] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.123737] CPU1: using LPI pending table @0x000000007d6a0000
[    0.123774] CPU1: update cpu_capacity 401
[    0.123778] CPU1: Booted secondary processor
[    0.124312] Detected VIPT I-cache on CPU2
[    0.124332] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.124354] CPU2: using LPI pending table @0x000000007d6d0000
[    0.124379] CPU2: update cpu_capacity 401
[    0.124383] CPU2: Booted secondary processor
[    0.124916] Detected VIPT I-cache on CPU3
[    0.124936] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.124958] CPU3: using LPI pending table @0x000000007d730000
[    0.124982] CPU3: update cpu_capacity 401
[    0.124986] CPU3: Booted secondary processor
[    0.125522] Detected PIPT I-cache on CPU4
[    0.125545] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.125578] CPU4: using LPI pending table @0x000000007d760000
[    0.125612] CPU4: update cpu_capacity 1024
[    0.125616] CPU4: Booted secondary processor
[    0.126149] Detected PIPT I-cache on CPU5
[    0.126167] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.126198] CPU5: using LPI pending table @0x000000007d790000
[    0.126223] CPU5: update cpu_capacity 1024
[    0.126226] CPU5: Booted secondary processor
[    0.126308] Brought up 6 CPUs
[    0.138646] SMP: Total of 6 processors activated.
[    0.139094] CPU features: detected feature: GIC system register CPU interface
[    0.139781] CPU features: detected feature: 32-bit EL0 Support
[    0.140339] CPU: All CPU(s) started at EL2
[    0.140766] alternatives: patching kernel code
[    0.142538] devtmpfs: initialized
[    0.160632] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.161590] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.162629] xor: measuring software checksum speed
[    0.172510]    8regs   :2856.000 MB/sec
[    0.182564]    8regs_prefetch:2564.000 MB/sec
[    0.192617]    32regs    :3208.000 MB/sec
[    0.202671]    32regs_prefetch:2848.000 MB/sec
[    0.203117] xor: using function: 32regs (3208.000 MB/sec)
[    0.203649] pinctrl core: initialized pinctrl subsystem
[    0.205833] Failed to find legacy iommu devices
[    0.206630] NET: Registered protocol family 16
[    0.212135] cpuidle: using governor ladder
[    0.216143] cpuidle: using governor menu
[    0.216534] Registered FIQ tty driver
[    0.217291] vdso: 2 pages (1 code @ ffffff8008c26000, 1 data @ ffffff80091e4000)
[    0.218016] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.219079] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.243270] console enabled
[    0.243632] pstore: Registered ramoops as persistent store backend
[    0.244229] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.247508] console enabled
[    0.247508] console enabled
[    0.248184] bootconsole disabled
[    0.248184] bootconsole disabled
[    0.249121] Registered fiq debugger ttyFIQ0
[    0.279172] raid6: int64x1gen()   468 MB/s
[    0.296204] raid6: int64x1xor()   412 MB/s
[    0.313343] raid6: int64x2gen()   675 MB/s
[    0.330422] raid6: int64x2xor()   601 MB/s
[    0.347491] raid6: int64x4gen()   980 MB/s
[    0.364584] raid6: int64x4xor()   673 MB/s
[    0.381724] raid6: int64x8gen()   781 MB/s
[    0.398749] raid6: int64x8xor()   630 MB/s
[    0.415877] raid6: neonx1   gen()   964 MB/s
[    0.432944] raid6: neonx1   xor()   675 MB/s
[    0.450023] raid6: neonx2   gen()1273 MB/s
[    0.467128] raid6: neonx2   xor()   980 MB/s
[    0.484206] raid6: neonx4   gen()1730 MB/s
[    0.501295] raid6: neonx4   xor()1166 MB/s
[    0.518404] raid6: neonx8   gen()1695 MB/s
[    0.535479] raid6: neonx8   xor()1234 MB/s
[    0.535863] raid6: using algorithm neonx4 gen() 1730 MB/s
[    0.536344] raid6: .... xor() 1166 MB/s, rmw enabled
[    0.536785] raid6: using intx1 recovery algorithm
[    0.542464] iommu: Adding device ff650000.vpu_service to group 0
[    0.543080] iommu: Adding device ff660000.rkvdec to group 1
[    0.543697] iommu: Adding device ff8f0000.vop to group 2
[    0.544265] iommu: Adding device ff900000.vop to group 3
[    0.544839] iommu: Adding device ff910000.rkisp1 to group 4
[    0.545425] iommu: Adding device ff920000.rkisp1 to group 5
[    0.546402] rk_iommu ff650800.iommu: can't get sclk
[    0.547092] rk_iommu ff660480.iommu: can't get sclk
[    0.547730] rk_iommu ff8f3f00.iommu: can't get sclk
[    0.548333] rk_iommu ff903f00.iommu: can't get sclk
[    0.548926] rk_iommu ff914000.iommu: can't get sclk
[    0.549533] rk_iommu ff924000.iommu: can't get sclk
[    0.550306] SCSI subsystem initialized
[    0.551001] usbcore: registered new interface driver usbfs
[    0.551524] usbcore: registered new interface driver hub
[    0.552092] usbcore: registered new device driver usb
[    0.552599] media: Linux media interface: v0.10
[    0.553046] Linux video capture interface: v2.00
[    0.553537] pps_core: LinuxPPS API ver. 1 registered
[    0.553979] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.554810] PTP clock support registered
[    0.556303] Advanced Linux Sound Architecture Driver Initialized.
[    0.557309] Bluetooth: Core ver 2.21
[    0.557646] NET: Registered protocol family 31
[    0.558054] Bluetooth: HCI device and connection manager initialized
[    0.558626] Bluetooth: HCI socket layer initialized
[    0.559067] Bluetooth: L2CAP socket layer initialized
[    0.559536] Bluetooth: SCO socket layer initialized
[    0.560464] nfc: nfc_init: NFC Core ver 0.1
[    0.560870] NET: Registered protocol family 39
[    0.561382] rockchip-cpuinfo cpuinfo: Serial         : e76abd2425d6bcef
[    0.562580] clocksource: Switched to clocksource arch_sys_counter
[    0.612198] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.613112] NET: Registered protocol family 2
[    0.613910] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.614690] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[    0.615722] TCP: Hash tables configured (established 16384 bind 16384)
[    0.616373] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[    0.616997] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[    0.617824] NET: Registered protocol family 1
[    0.618478] RPC: Registered named UNIX socket transport module.
[    0.619018] RPC: Registered udp transport module.
[    0.619436] RPC: Registered tcp transport module.
[    0.619863] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.621110] Trying to unpack rootfs image as initramfs...
[    1.031615] Freeing initrd memory: 8656K
[    1.032533] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.033355] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.037344] Initialise system trusted keyring
[    1.045784] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.047080] NFS: Registering the id_resolver key type
[    1.047565] Key type id_resolver registered
[    1.047965] Key type id_legacy registered
[    1.048342] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.049639] ntfs: driver 2.1.32 .
[    1.050398] fuse init (API version 7.23)
[    1.051103] SGI XFS with security attributes, no debug enabled
[    1.056912] NET: Registered protocol family 38
[    1.057328] Key type asymmetric registered
[    1.057708] Asymmetric key parser 'x509' registered
[    1.058296] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.059091] io scheduler noop registered
[    1.059447] io scheduler deadline registered
[    1.059877] io scheduler cfq registered (default)
[    1.065110] ace test_init function.
[    1.065613] ace test_init end.ret=0
[    1.066298] radar end.ret=0
[    1.069070] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.069679] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.070263] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.070832] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.071465] PCI host bridge /pcie@f8000000 ranges:
[    1.071945]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.072403]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    1.614642] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.615256] rockchip-pcie f8000000.pcie: deferred probe failed
[    1.615990] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    1.617443] backlight supply power not found, using dummy regulator
[    1.618615] Module initialized.
[    1.619319] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    1.620197] rk-vcodec ff650000.vpu_service: probe device
[    1.620923] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    1.622076] rk-vcodec ff650000.vpu_service: could not find power_model node
[    1.622710] rk-vcodec ff650000.vpu_service: init success
[    1.623424] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    1.624366] rk-vcodec ff660000.rkvdec: probe device
[    1.624998] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    1.625941] rk-vcodec ff660000.rkvdec: could not find power_model node
[    1.626523] rk-vcodec ff660000.rkvdec: init success
[    1.628399] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.629088] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.631283] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.631969] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.633814] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.635664] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.636837] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[    1.639403] Initialized drm 1.1.0 20060810
[    1.643790] Rockchip DRM driver version: v1.0.1
[    1.646408] mali ff9a0000.gpu: Failed to get regulator
[    1.646875] mali ff9a0000.gpu: Power control initialization failed
[    1.647789] Unable to detect cache hierarchy for CPU 0
[    1.649077] brd: module loaded
[    1.654628] loop: module loaded
[    1.655447] zram: Added device: zram0
[    1.656065] lkdtm: No crash points registered, enable through debugfs
[    1.656756] Loading dl1825 driver
[    1.658654] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    1.659733] m25p80 spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff
[    1.660321] m25p80: probe of spi32766.0 failed with error -2
[    1.661232] register spi return v = :0
[    1.662063] tun: Universal TUN/TAP device driver, 1.6
[    1.662517] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.664102] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.664745] rk_gmac-dwmac fe300000.ethernet: TX delay(0x2e).
[    1.665247] rk_gmac-dwmac fe300000.ethernet: RX delay(0x13).
[    1.665770] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.666482] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    1.667104] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.672661] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.673269] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.673730]Ring mode enabled
[    1.674011]DMA HW capability register supported
[    1.674417]Normal descriptors
[    1.674730]RX Checksum Offload Engine supported (type 2)
[    1.675216]TX Checksum insertion supported
[    1.675604]Wake-Up On Lan supported
[    1.675966]Enable RX Mitigation via HW Watchdog Timer
[    1.745736] libphy: stmmac: probed
[    1.746052] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.746631] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.748477] usbcore: registered new interface driver rndis_wlan
[    1.749276] Rockchip WiFi SYS interface (V1.00) ...
[    1.749870] usbcore: registered new interface driver rtl8150
[    1.750431] usbcore: registered new interface driver r8152
[    1.750991] usbcore: registered new interface driver asix
[    1.751521] usbcore: registered new interface driver ax88179_178a
[    1.752126] usbcore: registered new interface driver cdc_ether
[    1.752708] usbcore: registered new interface driver rndis_host
[    1.753313] usbcore: registered new interface driver cdc_ncm
[    1.753875] usbcore: registered new interface driver qmi_wwan
[    1.754433] usbcore: registered new interface driver cdc_mbim
[    1.756920] rockchip-dwc3 usb0: failed to get drvdata dwc3
[    1.758891] rockchip-dwc3 usb1: failed to get drvdata dwc3
[    1.760822] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.761416] ehci-pci: EHCI PCI platform driver
[    1.761906] ehci-platform: EHCI generic platform driver
[    1.763279] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.763862] ohci-platform: OHCI generic platform driver
[    1.765676] usbcore: registered new interface driver cdc_acm
[    1.766176] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.766946] usbcore: registered new interface driver cdc_wdm
[    1.767490] usbcore: registered new interface driver uas
[    1.768079] usbcore: registered new interface driver usb-storage
[    1.768708] usbcore: registered new interface driver usbserial
[    1.769255] usbcore: registered new interface driver usbserial_generic
[    1.769870] usbserial: USB Serial support registered for generic
[    1.770433] usbcore: registered new interface driver ch341
[    1.770952] usbserial: USB Serial support registered for ch341-uart
[    1.771537] usbcore: registered new interface driver cp210x
[    1.772071] usbserial: USB Serial support registered for cp210x
[    1.772633] usbcore: registered new interface driver ftdi_sio
[    1.773162] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.773849] usbcore: registered new interface driver keyspan
[    1.774368] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    1.775091] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    1.775771] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    1.776440] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    1.777128] usbcore: registered new interface driver option
[    1.777657] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.778298] usbcore: registered new interface driver oti6858
[    1.778828] usbserial: USB Serial support registered for oti6858
[    1.779388] usbcore: registered new interface driver pl2303
[    1.779918] usbserial: USB Serial support registered for pl2303
[    1.780467] usbcore: registered new interface driver qcserial
[    1.781018] usbserial: USB Serial support registered for Qualcomm USB modem
[    1.781670] usbcore: registered new interface driver sierra
[    1.782189] usbserial: USB Serial support registered for Sierra USB modem
[    1.783909] usbcore: registered new interface driver usbtouchscreen
[    1.784751] .. rk pwm remotectl v1.1 init
[    1.785349] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    1.786409] sensor_register_slave:mma8452,id=17
[    1.786838] sensor_register_slave:lis3dh,id=7
[    1.787227] sensor_register_slave:mma7660,id=18
[    1.787646] sensor_register_slave:lsm303d,id=22
[    1.788056] sensor_register_slave:gs_mc3230,id=23
[    1.788474]    gsensor_init
[    1.788802] sensor_register_slave:mpu6880_acc,id=24
[    1.789236] sensor_register_slave:mpu6500_acc,id=25
[    1.789677] sensor_register_slave:lsm330_acc,id=26
[    1.790111] sensor_register_slave:akm8975,id=30
[    1.790521] sensor_register_slave:akm8963,id=31
[    1.790939] sensor_register_slave:l3g4200d,id=45
[    1.791350] sensor_register_slave:l3g20d,id=46
[    1.791757] sensor_register_slave:ewtsa,id=47
[    1.792145] sensor_register_slave:lsm330_gyro,id=51
[    1.792586] sensor_register_slave:cm3217,id=53
[    1.792985] sensor_register_slave:cm3218,id=54
[    1.793880] i2c /dev entries driver
[    1.795428] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[    1.796121] fan53555-reg: supplied by vcc5v0_sys
[    1.798906] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[    1.799561] fan53555-reg: supplied by vcc5v0_sys
[    1.802391] rk808 0-001b: Pmic Chip id: 0x0
[    1.805829] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.806431] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.807076] DCDC_REG1: supplied by vcc3v3_sys
[    1.808240] DCDC_REG2: supplied by vcc3v3_sys
[    1.809245] DCDC_REG3: supplied by vcc3v3_sys
[    1.809962] DCDC_REG4: supplied by vcc3v3_sys
[    1.810854] LDO_REG1: supplied by vcc3v3_sys
[    1.812377] LDO_REG2: supplied by vcc3v3_sys
[    1.813804] LDO_REG3: supplied by vcc3v3_sys
[    1.815200] LDO_REG4: supplied by vcc3v3_sys
[    1.816629] LDO_REG5: supplied by vcc3v3_sys
[    1.818035] LDO_REG6: supplied by vcc3v3_sys
[    1.819440] LDO_REG7: supplied by vcc3v3_sys
[    1.820869] LDO_REG8: supplied by vcc3v3_sys
[    1.822272] SWITCH_REG1: supplied by vcc3v3_sys
[    1.823034] SWITCH_REG2: supplied by vcc3v3_sys
[    1.826844] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.827916] rk808 0-001b: Can not read property pmic,stby-gpio
[    1.828465] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80095e6000
[    1.829850] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80095ee000
[    1.831070] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80095fe000
[    1.832848] fusb302 7-0022: Can't get property of role, set role to default DRP
[    2.832612] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    2.833143] fusb302 7-0022: fusb302 send extcon to disable vbus 5v
[    3.833610] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    4.833620] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    5.833620] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    6.833618] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    7.833617] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    8.833617] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    9.833615] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   10.833616] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   11.833615] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   12.833607] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   13.833608] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   14.833616] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   15.833615] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   16.833615] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   17.833616] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   18.833615] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   19.833616] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   19.834496] fusb302 7-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[   19.835445] input: Typec_Headphone as /devices/platform/ff160000.i2c/i2c-7/7-0022/input/input1
[   20.836642] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   20.837175] mp8859 7-0066: failed to set slew_rate
[   20.837623] mp8859 7-0066: register ext0 dev0
[   20.838187] mp8859 7-0066: mp8859 probe successful
[   20.839072] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff80097c2000
[   20.841646] fusb302 4-0022: Can't get property of role, set role to default DRP
[   20.851485] fusb302 4-0022: port 1 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[   20.852486] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input2
[   20.853509] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80097c4000
[   20.855984] IR NEC protocol handler initialized
[   20.857546] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[   20.858149] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[   20.861051] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
[   20.861654] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[   20.864435] usbcore: registered new interface driver npu_acm
[   20.865038] usbcore: registered new interface driver uvcvideo
[   20.865548] USB Video Class driver (1.1.1)
[   20.866021] cw201x 2-0062: design_capacity missing!
[   21.865629] rk3x-i2c ff120000.i2c: timeout, ipd: 0x00, state: 1
[   21.866159] cw_bat_probe cw_init error
[   21.866510] cw201x: probe of 2-0062 failed with error -110
[   21.869837] Boot mode: coldboot
[   21.872221] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[   21.873230] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[   21.874806] dw_wdt ff848000.watchdog: Should better to setup a 'resets' property in dt, that must been named with reset
[   21.876677] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   21.877664] Bluetooth: Virtual HCI driver ver 1.5
[   21.878217] Bluetooth: HCI UART driver ver 2.3
[   21.878631] Bluetooth: HCI UART protocol H4 registered
[   21.879085] Bluetooth: HCI UART protocol LL registered
[   21.879538] Bluetooth: HCI UART protocol ATH3K registered
[   21.880085] usbcore: registered new interface driver bfusb
[   21.880625] usbcore: registered new interface driver btusb
[   21.881604] cpu cpu0: bin=1
[   21.881914] cpu cpu0: leakage=18
[   21.894839] cpu cpu0: temp=34444, pvtm=141341 (142146 + -805)
[   21.895838] cpu cpu0: pvtm-volt-sel=0
[   21.896254] cpu cpu0: bin-scale=34
[   21.897084] cpu cpu4: bin=1
[   21.897413] cpu cpu4: leakage=32
[   21.909836] cpu cpu4: temp=34444, pvtm=149108 (149605 + -497)
[   21.910459] cpu cpu4: pvtm-volt-sel=1
[   21.910869] cpu cpu4: bin-scale=17
[   21.912808] cpu cpu0: avs=0
[   21.913205] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   21.914716] cpu cpu0: failed to find power_model node
[   21.916529] cpu cpu4: avs=0
[   21.916945] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   21.919279] cpu cpu4: failed to find power_model node
[   21.920889] sdhci: Secure Digital Host Controller Interface driver
[   21.921435] sdhci: Copyright(c) Pierre Ossman
[   21.921850] Synopsys Designware Multimedia Card Interface Driver
[   21.923656] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[   21.924318] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[   21.924944] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[   21.925504] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[   21.926497] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[   21.927057] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[   21.928929] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[   21.929606] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[   21.930216] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[   21.930785] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[   21.931670] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[   21.932970] vccio_sd: unsupportable voltage range: 3300000-3000000uV
[   21.933553] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[   21.934261] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[   21.947565] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   21.961081] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[   21.962104] sdhci-pltfm: SDHCI platform and OF driver helper
[   21.964564] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[   21.965108] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[   21.995713] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[   21.997932] hidraw: raw HID events driver (C) Jiri Kosina
[   21.998734] usbcore: registered new interface driver usbhid
[   21.999233] usbhid: USB HID core driver
[   21.999725] inv_mpu_iio: inv_mpu_init:746
[   22.003349] usbcore: registered new interface driver snd-usb-audio
[   22.009401] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered
[   22.010102] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517
[   22.010994] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   22.011973] IPVS: Registered protocols (TCP, UDP)
[   22.012433] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[   22.013188] IPVS: Creating netns size=2104 id=0
[   22.013632] IPVS: ipvs loaded.
[   22.013909] IPVS: scheduler registered.
[   22.014565] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.015138] Initializing XFRM netlink socket
[   22.016159] NET: Registered protocol family 10
[   22.017515] NET: Registered protocol family 17
[   22.017988] NET: Registered protocol family 15
[   22.018420] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   22.019584] Bridge firewalling registered
[   22.020139] Bluetooth: RFCOMM socket layer initialized
[   22.020637] Bluetooth: RFCOMM ver 1.11
[   22.020987] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   22.021521] Bluetooth: HIDP socket layer initialized
[   22.022028] : Enter rfkill_wlan_init
[   22.022859] : Enter rfkill_rk_init
[   22.023528] Key type dns_resolver registered
[   22.024127] sensor_register_slave:mpu6880_gyro,id=50
[   22.025139] ov13850 1-0036: driver version: 00.01.03
[   22.028934] ov13850 1-0036: write SCCB_ID failed
[   22.029714] ov13850: probe of 1-0036 failed with error -5
[   22.030642] ov13850 1-0046: driver version: 00.01.03
[   22.033627] ov13850 1-0046: write SCCB_ID failed
[   22.034186] ov13850: probe of 1-0046 failed with error -5
[   22.035660] Registered cp15_barrier emulation handler
[   22.036192] Registered setend emulation handler
[   22.037702] Loading compiled-in X.509 certificates
[   22.040274] Btrfs loaded
[   22.041667] rga2: Driver loaded successfully ver:3.02
[   22.042476] rga2: Module initialized.
[   22.044062] phy phy-ff770000.syscon:usb2-phy@e450.3: Failed to get VBUS supply regulator
[   22.046753] phy phy-ff770000.syscon:usb2-phy@e460.5: Failed to get VBUS supply regulator
[   22.047424] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[   22.048311] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[   22.049310] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[   22.049971] rockchip-drm display-subsystem: dmc is disabled
[   22.050426] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[   22.050894] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[   22.051860] rockchip-vop ff900000.vop: missing rockchip,grf property
[   22.052750] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008ce2730)
[   22.053525] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[   22.054305] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008ce2730)
[   22.055414] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[   22.056041] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[   22.056833] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[   22.059518] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008cd6f88)
[   22.060777] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
[   22.061720] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008cd7fb8)
[   22.062417] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   22.063012] No driver support for vblank timestamp query.
[   22.063816] rockchip-drm display-subsystem: connector can't found any modes
[   22.064517] rockchip-drm display-subsystem: can't not find any loader display
[   22.065161] rockchip-drm display-subsystem: failed to show loader logo
[   22.065860] Freeing drm_logo memory: 616K
[   22.066232] rockchip-drm display-subsystem: No connectors reported connected with modes
[   22.066948] Cannot find any crtc or sizes - going 1024x768
[   22.077683] Console: switching to colour frame buffer device 128x48
[   22.083130] rockchip-drm display-subsystem: fb0:frame buffer device
[   22.089992] mali ff9a0000.gpu: leakage=24
[   22.114165] mali ff9a0000.gpu: temp=34444, pvtm=117293 (117615 + -322)
[   22.115892] mali ff9a0000.gpu: pvtm-volt-sel=0
[   22.116977] mali ff9a0000.gpu: avs=0
[   22.118099] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[   22.118984] mali ff9a0000.gpu: Protected mode not available
[   22.120047] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   22.120811] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[   22.121925] I : : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; : 423; : kbase_devfreq_init(); success initing power_model_simple.
[   22.123861] mali ff9a0000.gpu: Probed as mali0
[   22.128773] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[   22.129461] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 1
[   22.130286] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[   22.131111] xhci-hcd xhci-hcd.10.auto: irq 230, io mem 0xfe800000
[   22.131913] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   22.132515] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.133164] usb usb1: Product: xHCI Host Controller
[   22.133614] usb usb1: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty xhci-hcd
[   22.134249] usb usb1: SerialNumber: xhci-hcd.10.auto
[   22.135217] hub 1-0:1.0: USB hub found
[   22.135642] hub 1-0:1.0: 1 port detected
[   22.136293] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[   22.136944] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 2
[   22.137700] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   22.138516] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[   22.139132] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.139821] usb usb2: Product: xHCI Host Controller
[   22.140271] usb usb2: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty xhci-hcd
[   22.140969] usb usb2: SerialNumber: xhci-hcd.10.auto
[   22.142032] hub 2-0:1.0: USB hub found
[   22.142459] hub 2-0:1.0: 1 port detected
[   22.144458] xhci-hcd xhci-hcd.10.auto: remove, state 1
[   22.144951] usb usb2: USB disconnect, device number 1
[   22.161974] xhci-hcd xhci-hcd.10.auto: Host not halted after 16000 microseconds.
[   22.162640] xhci-hcd xhci-hcd.10.auto: Host controller not halted, aborting reset.
[   22.163364] xhci-hcd xhci-hcd.10.auto: USB bus 2 deregistered
[   22.164146] xhci-hcd xhci-hcd.10.auto: remove, state 1
[   22.164741] usb usb1: USB disconnect, device number 1
[   22.166183] xhci-hcd xhci-hcd.10.auto: USB bus 1 deregistered
[   22.167488] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[   22.168154] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 1
[   22.168981] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[   22.169806] xhci-hcd xhci-hcd.11.auto: irq 231, io mem 0xfe900000
[   22.170540] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   22.171165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.171819] usb usb1: Product: xHCI Host Controller
[   22.172257] usb usb1: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty xhci-hcd
[   22.172906] usb usb1: SerialNumber: xhci-hcd.11.auto
[   22.173763] hub 1-0:1.0: USB hub found
[   22.174122] hub 1-0:1.0: 1 port detected
[   22.174729] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[   22.175339] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 2
[   22.176088] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   22.176892] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[   22.177491] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.178150] usb usb2: Product: xHCI Host Controller
[   22.178599] usb usb2: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty xhci-hcd
[   22.179240] usb usb2: SerialNumber: xhci-hcd.11.auto
[   22.180107] hub 2-0:1.0: USB hub found
[   22.180484] hub 2-0:1.0: 1 port detected
[   22.181362] xhci-hcd xhci-hcd.11.auto: remove, state 1
[   22.181850] usb usb2: USB disconnect, device number 1
[   22.182735] xhci-hcd xhci-hcd.11.auto: USB bus 2 deregistered
[   22.183343] xhci-hcd xhci-hcd.11.auto: remove, state 1
[   22.183824] usb usb1: USB disconnect, device number 1
[   22.184774] xhci-hcd xhci-hcd.11.auto: USB bus 1 deregistered
[   22.189429] ehci-platform fe380000.usb: EHCI Host Controller
[   22.190103] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[   22.190907] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[   22.196622] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[   22.197329] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   22.197939] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.198591] usb usb1: Product: EHCI Host Controller
[   22.199030] usb usb1: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty ehci_hcd
[   22.199682] usb usb1: SerialNumber: fe380000.usb
[   22.200527] hub 1-0:1.0: USB hub found
[   22.200938] hub 1-0:1.0: 1 port detected
[   22.205457] ehci-platform fe3c0000.usb: EHCI Host Controller
[   22.206144] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[   22.206993] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[   22.212787] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[   22.213556] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   22.214174] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.214826] usb usb2: Product: EHCI Host Controller
[   22.215265] usb usb2: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty ehci_hcd
[   22.215914] usb usb2: SerialNumber: fe3c0000.usb
[   22.216866] hub 2-0:1.0: USB hub found
[   22.217224] hub 2-0:1.0: 1 port detected
[   22.218424] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[   22.219182] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[   22.219939] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[   22.220754] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
[   22.221455] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[   22.247457] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[   22.276970] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   22.277594] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.278230] usb usb3: Product: Generic Platform OHCI controller
[   22.278772] usb usb3: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty ohci_hcd
[   22.279407] usb usb3: SerialNumber: fe3a0000.usb
[   22.280412] hub 3-0:1.0: USB hub found
[   22.280854] hub 3-0:1.0: 1 port detected
[   22.282147] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[   22.282934] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[   22.283773] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[   22.339203] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   22.339861] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.340520] usb usb4: Product: Generic Platform OHCI controller
[   22.341086] usb usb4: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty ohci_hcd
[   22.341766] usb usb4: SerialNumber: fe3e0000.usb
[   22.343435] hub 4-0:1.0: USB hub found
[   22.343932] hub 4-0:1.0: 1 port detected
[   22.346081] input: adc-keys as /devices/platform/adc-keys/input/input3
[   22.349419] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[   22.350213] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[   22.350866] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[   22.351442] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[   22.352570] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[   22.353161] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[   22.354532] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[   22.370638] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   22.384110] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[   22.386134] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[   22.389672] rockchip-cdndp-sound dp-sound: spdif-hifi <-> ff870000.spdif mapping ok
[   22.390418] hdmi-audio-codec hdmi-audio-codec.9.auto: ASoC: Failed to create Playback debugfs file
[   22.392374] input: rockchip-cdndp-sound DP Jack as /devices/platform/dp-sound/sound/card1/input4
[   22.394942] input: gpio-keys as /devices/platform/gpio-keys/input/input5
[   22.396152] ==gsl_ts_init==
[   22.396533] ret=0
[   22.399723] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:26 UTC (1358499026)
[   22.430377] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[   22.431336] vcc_mipi: disabling
[   22.431641] dvdd_1v2: disabling
[   22.432661] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[   22.434881] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[   22.438464] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[   22.442774] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[   22.500420] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[   22.507683] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 228
[   22.508331] mmc0: new ultra high speed SDR104 SDXC card at address aaaa
[   22.510733] mmcblk0: mmc0:aaaa SD64G 59.5 GiB
[   22.517918] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0.
[   22.519824] usb 2-1: new high-speed USB device number 2 using ehci-platform
[   22.523118] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[   22.523717] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[   22.526949]mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[   22.529377] vendor storage:20190527 ret = 0
[   22.636658] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
[   22.637272] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   22.637944] usb 2-1: Product: USB 2.0 Hub
[   22.640183] hub 2-1:1.0: USB hub found
[   22.641207] hub 2-1:1.0: 7 ports detected
[   23.431879] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
M? 23.435478]

saveu 发表于 2021-5-12 12:42:12

DIY_IMG_原板_RK3399.log

DDR Version 1.24 20191016
In
soft reset
SRX
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg = 0x32817281, stride = 0x9
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 429
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=60906MB
FwPartOffset=2000 , 0
run on sd0
StorageInit ok = 78329
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:0, name:            uboot, start:0x4000, size:0x2000
GPT part:1, name:            trust, start:0x6000, size:0x2000
GPT part:2, name:             misc, start:0x8000, size:0x2000
GPT part:3, name:             boot, start:0xa000, size:0x10000
GPT part:4, name:         recovery, start:0x1a000, size:0x10000
GPT part:5, name:         backup, start:0x2a000, size:0x10000
GPT part:6, name:         rootfs, start:0x5a000, size:0x5dbe00
GPT part:7, name:         userdata, start:0x635e00, size:0x70bf1df
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xe3098
RunBL31 0x40000 @ 247454 us
NOTICE:BL31: v1.3(release):845ee93
NOTICE:BL31: Built : 15:51:11, Jul 22 2020
NOTICE:BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-266-gee81607c #1 Mon Aug 17 09:23:30 UTC 2020 aarch64)

INF TEE-CORE:init_primary_helper:338: Release version: 1.2

INF TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-gc56bc3a030 #root (May 12 2021 - 11:29:17 +0800)

Model: ROC-RK3399-PC Board
PreSerial: 2
DRAM:2 GiB
Sysmem: init
Relocation Offset: 7dbec000, fdt: 7bdd5728
I2c0 speed: 400000Hz
PMIC:RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log init 1100000 uV
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
Using default environment

In:    serial
Out:   serial
Err:   serial
Model: ROC-RK3399-PC Board
switch to partitions #0, OK
mmc1 is current device
Found IDB in SDcard
Bootdev(atags): mmc 1
MMC1: Legacy, 50Mhz
PartType: EFI
boot mode: normal
Found DTB in boot part
Rockchip UBOOT DRM driver version: v1.0.1
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 816000 KHz
dpll 800000 KHz
cpll 24000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 24000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):0
ANDROID: reboot reason: "(none)"
DTB: rk-kernel.dtb
HASH(c): OK
Android header version 0
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 19455 KiB
RAM disk load addr 0x0a200000 size 8657 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831cade
No file: logo_kernel.bmp
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
Total: 3106.568 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.194-g50f0a60241aa-dirty (root@bw-MS-7C52) (firefly: 50f0a60241aa6c9af65d5bdbdaae40df4cd77be3) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #6 SMP Tue May 11 17:10:44 CST 2021
[    0.000000] Boot CPU: AArch64 Processor
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fedf000 s46312 r8192 d31512 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 507912
[    0.000000] Kernel command line: storagemedia=sd androidboot.storagemedia=sd androidboot.mode=normalandroidboot.slot_suffix= androidboot.serialno=4eaf29be85563b5ero rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] software IO TLB: mapped (0MB)
[    0.000000] Memory: 1996272K/2064384K available (11902K kernel code, 1662K rwdata, 4688K rodata, 1152K init, 1920K bss, 68112K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]   modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]   vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff80090c0000 - 0xffffff80091e0000   (1152 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008c20000   ( 11904 KB)
[    0.000000]   .rodata : 0xffffff8008c20000 - 0xffffff80090c0000   (4736 KB)
[    0.000000]       .data : 0xffffff80091e0000 - 0xffffff800937f808   (1663 KB)
[    0.000000]   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (   8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
[    0.000000]   fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (4116 KB)
[    0.000000]   PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]   memory: 0xffffffc000200000 - 0xffffffc080000000   (2046 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]Build-time adjustment of leaf fanout to 64.
[    0.000000]RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @7d480000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x000000007d410000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x000000007d420000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[    0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002201] Console: colour dummy device 80x25
[    0.002641] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003627] pid_max: default: 32768 minimum: 301
[    0.004148] Security Framework initialized
[    0.004609] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005249] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.006594] Initializing cgroup subsys io
[    0.007000] Initializing cgroup subsys memory
[    0.007439] Initializing cgroup subsys devices
[    0.007870] Initializing cgroup subsys freezer
[    0.008308] Initializing cgroup subsys perf_event
[    0.008763] Initializing cgroup subsys net_prio
[    0.009200] Initializing cgroup subsys pids
[    0.009629] ftrace: allocating 44598 entries in 175 pages
[    0.115542] sched-energy: Sched-energy-costs installed from DT
[    0.116106] CPU0: update cpu_capacity 401
[    0.116548] ASID allocator initialised with 32768 entries
[    0.120156] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.121485] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.123671] Detected VIPT I-cache on CPU1
[    0.123700] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.123724] CPU1: using LPI pending table @0x000000007d6a0000
[    0.123761] CPU1: update cpu_capacity 401
[    0.123765] CPU1: Booted secondary processor
[    0.124296] Detected VIPT I-cache on CPU2
[    0.124316] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.124338] CPU2: using LPI pending table @0x000000007d6d0000
[    0.124364] CPU2: update cpu_capacity 401
[    0.124367] CPU2: Booted secondary processor
[    0.124899] Detected VIPT I-cache on CPU3
[    0.124919] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.124941] CPU3: using LPI pending table @0x000000007d730000
[    0.124966] CPU3: update cpu_capacity 401
[    0.124969] CPU3: Booted secondary processor
[    0.125501] Detected PIPT I-cache on CPU4
[    0.125525] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.125558] CPU4: using LPI pending table @0x000000007d760000
[    0.125592] CPU4: update cpu_capacity 1024
[    0.125595] CPU4: Booted secondary processor
[    0.126129] Detected PIPT I-cache on CPU5
[    0.126147] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.126178] CPU5: using LPI pending table @0x000000007d790000
[    0.126203] CPU5: update cpu_capacity 1024
[    0.126207] CPU5: Booted secondary processor
[    0.126288] Brought up 6 CPUs
[    0.138634] SMP: Total of 6 processors activated.
[    0.139085] CPU features: detected feature: GIC system register CPU interface
[    0.139772] CPU features: detected feature: 32-bit EL0 Support
[    0.140331] CPU: All CPU(s) started at EL2
[    0.140757] alternatives: patching kernel code
[    0.142525] devtmpfs: initialized
[    0.160659] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.161617] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.162646] xor: measuring software checksum speed
[    0.172498]    8regs   :2856.000 MB/sec
[    0.182553]    8regs_prefetch:2564.000 MB/sec
[    0.192606]    32regs    :3208.000 MB/sec
[    0.202659]    32regs_prefetch:2848.000 MB/sec
[    0.203106] xor: using function: 32regs (3208.000 MB/sec)
[    0.203637] pinctrl core: initialized pinctrl subsystem
[    0.205819] Failed to find legacy iommu devices
[    0.206618] NET: Registered protocol family 16
[    0.212125] cpuidle: using governor ladder
[    0.216133] cpuidle: using governor menu
[    0.216524] Registered FIQ tty driver
[    0.217279] vdso: 2 pages (1 code @ ffffff8008c26000, 1 data @ ffffff80091e4000)
[    0.218004] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.219066] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.243677] console enabled
[    0.244046] pstore: Registered ramoops as persistent store backend
[    0.244638] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.247907] console enabled
[    0.247907] console enabled
[    0.248595] bootconsole disabled
[    0.248595] bootconsole disabled
[    0.249520] Registered fiq debugger ttyFIQ0
[    0.280161] raid6: int64x1gen()   468 MB/s
[    0.297226] raid6: int64x1xor()   412 MB/s
[    0.314341] raid6: int64x2gen()   675 MB/s
[    0.331417] raid6: int64x2xor()   597 MB/s
[    0.348500] raid6: int64x4gen()   980 MB/s
[    0.365588] raid6: int64x4xor()   673 MB/s
[    0.382711] raid6: int64x8gen()   781 MB/s
[    0.399756] raid6: int64x8xor()   630 MB/s
[    0.416858] raid6: neonx1   gen()   964 MB/s
[    0.433944] raid6: neonx1   xor()   675 MB/s
[    0.451057] raid6: neonx2   gen()1277 MB/s
[    0.468127] raid6: neonx2   xor()   980 MB/s
[    0.485210] raid6: neonx4   gen()1730 MB/s
[    0.502285] raid6: neonx4   xor()1166 MB/s
[    0.519383] raid6: neonx8   gen()1691 MB/s
[    0.536471] raid6: neonx8   xor()1234 MB/s
[    0.536855] raid6: using algorithm neonx4 gen() 1730 MB/s
[    0.537336] raid6: .... xor() 1166 MB/s, rmw enabled
[    0.537777] raid6: using intx1 recovery algorithm
[    0.543475] iommu: Adding device ff650000.vpu_service to group 0
[    0.544090] iommu: Adding device ff660000.rkvdec to group 1
[    0.544704] iommu: Adding device ff8f0000.vop to group 2
[    0.545269] iommu: Adding device ff900000.vop to group 3
[    0.545840] iommu: Adding device ff910000.rkisp1 to group 4
[    0.546425] iommu: Adding device ff920000.rkisp1 to group 5
[    0.547414] rk_iommu ff650800.iommu: can't get sclk
[    0.548102] rk_iommu ff660480.iommu: can't get sclk
[    0.548737] rk_iommu ff8f3f00.iommu: can't get sclk
[    0.549340] rk_iommu ff903f00.iommu: can't get sclk
[    0.549933] rk_iommu ff914000.iommu: can't get sclk
[    0.550541] rk_iommu ff924000.iommu: can't get sclk
[    0.551314] SCSI subsystem initialized
[    0.552011] usbcore: registered new interface driver usbfs
[    0.552534] usbcore: registered new interface driver hub
[    0.553102] usbcore: registered new device driver usb
[    0.553610] media: Linux media interface: v0.10
[    0.554057] Linux video capture interface: v2.00
[    0.554548] pps_core: LinuxPPS API ver. 1 registered
[    0.554990] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.555821] PTP clock support registered
[    0.557307] Advanced Linux Sound Architecture Driver Initialized.
[    0.558318] Bluetooth: Core ver 2.21
[    0.558654] NET: Registered protocol family 31
[    0.559060] Bluetooth: HCI device and connection manager initialized
[    0.559632] Bluetooth: HCI socket layer initialized
[    0.560073] Bluetooth: L2CAP socket layer initialized
[    0.560543] Bluetooth: SCO socket layer initialized
[    0.561471] nfc: nfc_init: NFC Core ver 0.1
[    0.561877] NET: Registered protocol family 39
[    0.562388] rockchip-cpuinfo cpuinfo: Serial         : 4eaf29be85563b5e
[    0.563582] clocksource: Switched to clocksource arch_sys_counter
[    0.613269] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.614178] NET: Registered protocol family 2
[    0.614973] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.615754] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[    0.616789] TCP: Hash tables configured (established 16384 bind 16384)
[    0.617437] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[    0.618061] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[    0.618889] NET: Registered protocol family 1
[    0.619543] RPC: Registered named UNIX socket transport module.
[    0.620084] RPC: Registered udp transport module.
[    0.620503] RPC: Registered tcp transport module.
[    0.620929] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.622176] Trying to unpack rootfs image as initramfs...
[    1.033378] Freeing initrd memory: 8656K
[    1.034314] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.035138] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.039095] Initialise system trusted keyring
[    1.047517] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.048827] NFS: Registering the id_resolver key type
[    1.049296] Key type id_resolver registered
[    1.049690] Key type id_legacy registered
[    1.050065] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.051337] ntfs: driver 2.1.32 .
[    1.052107] fuse init (API version 7.23)
[    1.052809] SGI XFS with security attributes, no debug enabled
[    1.058535] NET: Registered protocol family 38
[    1.058973] Key type asymmetric registered
[    1.059341] Asymmetric key parser 'x509' registered
[    1.059939] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.060737] io scheduler noop registered
[    1.061094] io scheduler deadline registered
[    1.061508] io scheduler cfq registered (default)
[    1.066795] ace test_init function.
[    1.067281] ace test_init end.ret=0
[    1.067994] radar end.ret=0
[    1.070778] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.071364] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.071972] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.072531] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.073147] PCI host bridge /pcie@f8000000 ranges:
[    1.073705]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.074163]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    1.616642] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.617255] rockchip-pcie f8000000.pcie: deferred probe failed
[    1.617998] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    1.619407] backlight supply power not found, using dummy regulator
[    1.620560] Module initialized.
[    1.621280] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    1.622150] rk-vcodec ff650000.vpu_service: probe device
[    1.622882] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    1.624028] rk-vcodec ff650000.vpu_service: could not find power_model node
[    1.624664] rk-vcodec ff650000.vpu_service: init success
[    1.625384] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    1.626349] rk-vcodec ff660000.rkvdec: probe device
[    1.626982] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    1.627925] rk-vcodec ff660000.rkvdec: could not find power_model node
[    1.628506] rk-vcodec ff660000.rkvdec: init success
[    1.630379] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.631068] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.633266] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.633954] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.635795] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.637616] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.638782] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[    1.641297] Initialized drm 1.1.0 20060810
[    1.645660] Rockchip DRM driver version: v1.0.1
[    1.648281] mali ff9a0000.gpu: Failed to get regulator
[    1.648748] mali ff9a0000.gpu: Power control initialization failed
[    1.649659] Unable to detect cache hierarchy for CPU 0
[    1.650950] brd: module loaded
[    1.656457] loop: module loaded
[    1.657286] zram: Added device: zram0
[    1.657903] lkdtm: No crash points registered, enable through debugfs
[    1.658591] Loading dl1825 driver
[    1.660479] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    1.661557] m25p80 spi32766.0: unrecognized JEDEC id bytes: ff, ff, ff
[    1.662159] m25p80: probe of spi32766.0 failed with error -2
[    1.663074] register spi return v = :0
[    1.663905] tun: Universal TUN/TAP device driver, 1.6
[    1.664358] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.665951] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.666596] rk_gmac-dwmac fe300000.ethernet: TX delay(0x2e).
[    1.667098] rk_gmac-dwmac fe300000.ethernet: RX delay(0x13).
[    1.667623] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.668344] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    1.668967] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.674518] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.675144] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.675607]Ring mode enabled
[    1.675888]DMA HW capability register supported
[    1.676294]Normal descriptors
[    1.676608]RX Checksum Offload Engine supported (type 2)
[    1.677094]TX Checksum insertion supported
[    1.677477]Wake-Up On Lan supported
[    1.677845]Enable RX Mitigation via HW Watchdog Timer
[    1.747780] libphy: stmmac: probed
[    1.748095] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.748675] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.750517] usbcore: registered new interface driver rndis_wlan
[    1.751324] Rockchip WiFi SYS interface (V1.00) ...
[    1.751941] usbcore: registered new interface driver rtl8150
[    1.752500] usbcore: registered new interface driver r8152
[    1.753060] usbcore: registered new interface driver asix
[    1.753604] usbcore: registered new interface driver ax88179_178a
[    1.754196] usbcore: registered new interface driver cdc_ether
[    1.754781] usbcore: registered new interface driver rndis_host
[    1.755386] usbcore: registered new interface driver cdc_ncm
[    1.755947] usbcore: registered new interface driver qmi_wwan
[    1.756505] usbcore: registered new interface driver cdc_mbim
[    1.759002] rockchip-dwc3 usb0: failed to get drvdata dwc3
[    1.760967] rockchip-dwc3 usb1: failed to get drvdata dwc3
[    1.762904] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.763499] ehci-pci: EHCI PCI platform driver
[    1.763992] ehci-platform: EHCI generic platform driver
[    1.765371] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.765953] ohci-platform: OHCI generic platform driver
[    1.767600] usbcore: registered new interface driver cdc_acm
[    1.768102] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.768854] usbcore: registered new interface driver cdc_wdm
[    1.769386] usbcore: registered new interface driver uas
[    1.769920] usbcore: registered new interface driver usb-storage
[    1.770524] usbcore: registered new interface driver usbserial
[    1.771087] usbcore: registered new interface driver usbserial_generic
[    1.771700] usbserial: USB Serial support registered for generic
[    1.772262] usbcore: registered new interface driver ch341
[    1.772781] usbserial: USB Serial support registered for ch341-uart
[    1.773365] usbcore: registered new interface driver cp210x
[    1.773895] usbserial: USB Serial support registered for cp210x
[    1.774445] usbcore: registered new interface driver ftdi_sio
[    1.774986] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.775678] usbcore: registered new interface driver keyspan
[    1.776197] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    1.776921] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    1.777598] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    1.778264] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    1.778950] usbcore: registered new interface driver option
[    1.779468] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.780123] usbcore: registered new interface driver oti6858
[    1.780654] usbserial: USB Serial support registered for oti6858
[    1.781215] usbcore: registered new interface driver pl2303
[    1.781747] usbserial: USB Serial support registered for pl2303
[    1.782296] usbcore: registered new interface driver qcserial
[    1.782838] usbserial: USB Serial support registered for Qualcomm USB modem
[    1.783479] usbcore: registered new interface driver sierra
[    1.784012] usbserial: USB Serial support registered for Sierra USB modem
[    1.785682] usbcore: registered new interface driver usbtouchscreen
[    1.786506] .. rk pwm remotectl v1.1 init
[    1.787119] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    1.788196] sensor_register_slave:mma8452,id=17
[    1.788628] sensor_register_slave:lis3dh,id=7
[    1.789017] sensor_register_slave:mma7660,id=18
[    1.789427] sensor_register_slave:lsm303d,id=22
[    1.789848] sensor_register_slave:gs_mc3230,id=23
[    1.790266]    gsensor_init
[    1.790594] sensor_register_slave:mpu6880_acc,id=24
[    1.791028] sensor_register_slave:mpu6500_acc,id=25
[    1.791461] sensor_register_slave:lsm330_acc,id=26
[    1.791903] sensor_register_slave:akm8975,id=30
[    1.792313] sensor_register_slave:akm8963,id=31
[    1.792731] sensor_register_slave:l3g4200d,id=45
[    1.793142] sensor_register_slave:l3g20d,id=46
[    1.793541] sensor_register_slave:ewtsa,id=47
[    1.793937] sensor_register_slave:lsm330_gyro,id=51
[    1.794371] sensor_register_slave:cm3217,id=53
[    1.794777] sensor_register_slave:cm3218,id=54
[    1.795699] i2c /dev entries driver
[    1.797235] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[    1.797921] fan53555-reg: supplied by vcc5v0_sys
[    1.800467] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[    1.801148] fan53555-reg: supplied by vcc5v0_sys
[    1.803743] rk808 0-001b: Pmic Chip id: 0x0
[    1.806834] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.807435] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.808076] DCDC_REG1: supplied by vcc3v3_sys
[    1.809238] DCDC_REG2: supplied by vcc3v3_sys
[    1.810243] DCDC_REG3: supplied by vcc3v3_sys
[    1.810960] DCDC_REG4: supplied by vcc3v3_sys
[    1.811839] LDO_REG1: supplied by vcc3v3_sys
[    1.813373] LDO_REG2: supplied by vcc3v3_sys
[    1.814803] LDO_REG3: supplied by vcc3v3_sys
[    1.816198] LDO_REG4: supplied by vcc3v3_sys
[    1.817628] LDO_REG5: supplied by vcc3v3_sys
[    1.819034] LDO_REG6: supplied by vcc3v3_sys
[    1.820427] LDO_REG7: supplied by vcc3v3_sys
[    1.821866] LDO_REG8: supplied by vcc3v3_sys
[    1.823271] SWITCH_REG1: supplied by vcc3v3_sys
[    1.824028] SWITCH_REG2: supplied by vcc3v3_sys
[    1.827846] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.828920] rk808 0-001b: Can not read property pmic,stby-gpio
[    1.829469] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80095e6000
[    1.830857] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80095ee000
[    1.832080] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80095fe000
[    1.833865] fusb302 7-0022: Can't get property of role, set role to default DRP
[    2.833614] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    2.834145] fusb302 7-0022: fusb302 send extcon to disable vbus 5v
[    3.834602] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    4.834614] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    5.834615] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    6.834611] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    7.834611] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    8.834610] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    9.834610] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   10.834610] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   11.834609] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   12.834609] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   13.834609] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   14.834610] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   15.834609] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   16.834610] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   17.834609] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   18.834609] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   19.834609] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   19.835489] fusb302 7-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[   19.836456] input: Typec_Headphone as /devices/platform/ff160000.i2c/i2c-7/7-0022/input/input1
[   20.837645] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   20.838178] mp8859 7-0066: failed to set slew_rate
[   20.838626] mp8859 7-0066: register ext0 dev0
[   20.839190] mp8859 7-0066: mp8859 probe successful
[   20.840074] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff80097c2000
[   20.842553] fusb302 4-0022: Can't get property of role, set role to default DRP
[   20.852570] fusb302 4-0022: port 1 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[   20.853594] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input2
[   20.854609] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80097c4000
[   20.857026] IR NEC protocol handler initialized
[   20.858570] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[   20.859173] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[   20.862077] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
[   20.862680] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[   20.865462] usbcore: registered new interface driver npu_acm
[   20.866068] usbcore: registered new interface driver uvcvideo
[   20.866593] USB Video Class driver (1.1.1)
[   20.867051] cw201x 2-0062: design_capacity missing!
[   21.866631] rk3x-i2c ff120000.i2c: timeout, ipd: 0x00, state: 1
[   21.867161] cw_bat_probe cw_init error
[   21.867512] cw201x: probe of 2-0062 failed with error -110
[   21.870847] Boot mode: normal
[   21.873213] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[   21.874220] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[   21.875798] dw_wdt ff848000.watchdog: Should better to setup a 'resets' property in dt, that must been named with reset
[   21.877621] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   21.878604] Bluetooth: Virtual HCI driver ver 1.5
[   21.879173] Bluetooth: HCI UART driver ver 2.3
[   21.879588] Bluetooth: HCI UART protocol H4 registered
[   21.880043] Bluetooth: HCI UART protocol LL registered
[   21.880496] Bluetooth: HCI UART protocol ATH3K registered
[   21.881060] usbcore: registered new interface driver bfusb
[   21.881622] usbcore: registered new interface driver btusb
[   21.882770] cpu cpu0: bin=1
[   21.883099] cpu cpu0: leakage=23
[   21.896424] cpu cpu0: temp=36250, pvtm=146450 (147025 + -575)
[   21.897334] cpu cpu0: pvtm-volt-sel=1
[   21.897753] cpu cpu0: bin-scale=34
[   21.898465] cpu cpu4: bin=1
[   21.898860] cpu cpu4: leakage=40
[   21.911935] cpu cpu4: temp=36875, pvtm=154931 (155286 + -355)
[   21.913373] cpu cpu4: pvtm-volt-sel=1
[   21.913787] cpu cpu4: bin-scale=17
[   21.915739] cpu cpu0: avs=0
[   21.916137] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   21.917683] cpu cpu0: failed to find power_model node
[   21.919479] cpu cpu4: avs=0
[   21.919896] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   21.922210] cpu cpu4: failed to find power_model node
[   21.923868] sdhci: Secure Digital Host Controller Interface driver
[   21.924412] sdhci: Copyright(c) Pierre Ossman
[   21.924829] Synopsys Designware Multimedia Card Interface Driver
[   21.926634] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[   21.927296] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[   21.927922] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[   21.928479] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[   21.929475] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[   21.930039] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[   21.931871] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[   21.932528] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[   21.933161] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[   21.933725] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[   21.934605] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[   21.935942] vccio_sd: unsupportable voltage range: 3300000-3000000uV
[   21.936527] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[   21.937229] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[   21.950481] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   21.963992] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[   21.965006] sdhci-pltfm: SDHCI platform and OF driver helper
[   21.967445] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[   21.967990] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[   21.998741] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[   22.000770] hidraw: raw HID events driver (C) Jiri Kosina
[   22.001901] usbcore: registered new interface driver usbhid
[   22.002397] usbhid: USB HID core driver
[   22.002949] inv_mpu_iio: inv_mpu_init:746
[   22.007479] usbcore: registered new interface driver snd-usb-audio
[   22.013473] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered
[   22.014174] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517
[   22.015063] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   22.016049] IPVS: Registered protocols (TCP, UDP)
[   22.016512] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[   22.017274] IPVS: Creating netns size=2104 id=0
[   22.017719] IPVS: ipvs loaded.
[   22.018007] IPVS: scheduler registered.
[   22.018679] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.019238] Initializing XFRM netlink socket
[   22.020244] NET: Registered protocol family 10
[   22.021829] NET: Registered protocol family 17
[   22.022252] NET: Registered protocol family 15
[   22.022696] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   22.023835] Bridge firewalling registered
[   22.024619] Bluetooth: RFCOMM socket layer initialized
[   22.025099] Bluetooth: RFCOMM ver 1.11
[   22.025458] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   22.025997] Bluetooth: HIDP socket layer initialized
[   22.026494] : Enter rfkill_wlan_init
[   22.027246] : Enter rfkill_rk_init
[   22.027855] Key type dns_resolver registered
[   22.028491] sensor_register_slave:mpu6880_gyro,id=50
[   22.029637] ov13850 1-0036: driver version: 00.01.03
[   22.033381] ov13850 1-0036: write SCCB_ID failed
[   22.034085] ov13850: probe of 1-0036 failed with error -5
[   22.035058] ov13850 1-0046: driver version: 00.01.03
[   22.038239] ov13850 1-0046: write SCCB_ID failed
[   22.038825] ov13850: probe of 1-0046 failed with error -5
[   22.040320] Registered cp15_barrier emulation handler
[   22.040875] Registered setend emulation handler
[   22.042334] Loading compiled-in X.509 certificates
[   22.044918] Btrfs loaded
[   22.046287] rga2: Driver loaded successfully ver:3.02
[   22.047111] rga2: Module initialized.
[   22.048468] phy phy-ff770000.syscon:usb2-phy@e450.3: Failed to get VBUS supply regulator
[   22.050385] phy phy-ff770000.syscon:usb2-phy@e460.5: Failed to get VBUS supply regulator
[   22.052654] rockchip-drm display-subsystem: dmc is disabled
[   22.052720] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[   22.053437] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[   22.053967] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[   22.054388] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[   22.054859] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[   22.056008] rockchip-vop ff900000.vop: missing rockchip,grf property
[   22.056833] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008ce2730)
[   22.057614] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[   22.058353] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008ce2730)
[   22.059484] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[   22.060117] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[   22.060901] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[   22.063312] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008cd6f88)
[   22.064604] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
[   22.065540] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008cd7fb8)
[   22.066257] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   22.066852] No driver support for vblank timestamp query.
[   22.067620] rockchip-drm display-subsystem: connector can't found any modes
[   22.068340] rockchip-drm display-subsystem: can't not find any loader display
[   22.069009] rockchip-drm display-subsystem: failed to show loader logo
[   22.069759] Freeing drm_logo memory: 616K
[   22.070135] rockchip-drm display-subsystem: No connectors reported connected with modes
[   22.070861] Cannot find any crtc or sizes - going 1024x768
[   22.079080] Console: switching to colour frame buffer device 128x48
[   22.083744] rockchip-drm display-subsystem: fb0:frame buffer device
[   22.089741] mali ff9a0000.gpu: leakage=29
[   22.103040] mali ff9a0000.gpu: temp=36875, pvtm=121780 (122010 + -230)
[   22.105001] mali ff9a0000.gpu: pvtm-volt-sel=1
[   22.106717] mali ff9a0000.gpu: avs=0
[   22.108110] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[   22.109394] mali ff9a0000.gpu: Protected mode not available
[   22.111210] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   22.111999] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[   22.113277] I : : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; : 423; : kbase_devfreq_init(); success initing power_model_simple.
[   22.115872] mali ff9a0000.gpu: Probed as mali0
[   22.121898] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[   22.123032] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 1
[   22.124056] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[   22.124987] xhci-hcd xhci-hcd.10.auto: irq 230, io mem 0xfe800000
[   22.126104] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   22.126753] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.127411] usb usb1: Product: xHCI Host Controller
[   22.127886] usb usb1: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty xhci-hcd
[   22.128543] usb usb1: SerialNumber: xhci-hcd.10.auto
[   22.130322] hub 1-0:1.0: USB hub found
[   22.130870] hub 1-0:1.0: 1 port detected
[   22.132262] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[   22.133248] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 2
[   22.134127] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   22.135127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[   22.135776] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.136434] usb usb2: Product: xHCI Host Controller
[   22.136909] usb usb2: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty xhci-hcd
[   22.137566] usb usb2: SerialNumber: xhci-hcd.10.auto
[   22.139874] hub 2-0:1.0: USB hub found
[   22.140313] hub 2-0:1.0: 1 port detected
[   22.143986] xhci-hcd xhci-hcd.10.auto: remove, state 1
[   22.144490] usb usb2: USB disconnect, device number 1
[   22.162228] xhci-hcd xhci-hcd.10.auto: Host not halted after 16000 microseconds.
[   22.162672] dwmmc_rockchip fe320000.dwmmc: Unexpected interrupt latency
[   22.163484] xhci-hcd xhci-hcd.10.auto: Host controller not halted, aborting reset.
[   22.164259] xhci-hcd xhci-hcd.10.auto: USB bus 2 deregistered
[   22.166835] xhci-hcd xhci-hcd.10.auto: remove, state 1
[   22.167318] usb usb1: USB disconnect, device number 1
[   22.168871] xhci-hcd xhci-hcd.10.auto: USB bus 1 deregistered
[   22.170166] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[   22.170924] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 1
[   22.171756] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[   22.172569] xhci-hcd xhci-hcd.11.auto: irq 231, io mem 0xfe900000
[   22.173370] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   22.173997] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.174644] usb usb1: Product: xHCI Host Controller
[   22.175085] usb usb1: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty xhci-hcd
[   22.175731] usb usb1: SerialNumber: xhci-hcd.11.auto
[   22.176788] hub 1-0:1.0: USB hub found
[   22.177153] hub 1-0:1.0: 1 port detected
[   22.177803] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[   22.178545] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 2
[   22.179345] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   22.180176] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[   22.180790] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.181425] usb usb2: Product: xHCI Host Controller
[   22.181886] usb usb2: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty xhci-hcd
[   22.182521] usb usb2: SerialNumber: xhci-hcd.11.auto
[   22.183618] hub 2-0:1.0: USB hub found
[   22.183982] hub 2-0:1.0: 1 port detected
[   22.184905] xhci-hcd xhci-hcd.11.auto: remove, state 1
[   22.185382] usb usb2: USB disconnect, device number 1
[   22.186607] xhci-hcd xhci-hcd.11.auto: USB bus 2 deregistered
[   22.187359] xhci-hcd xhci-hcd.11.auto: remove, state 1
[   22.187847] usb usb1: USB disconnect, device number 1
[   22.189025] xhci-hcd xhci-hcd.11.auto: USB bus 1 deregistered
[   22.192349] ehci-platform fe380000.usb: EHCI Host Controller
[   22.193150] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[   22.193974] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[   22.199648] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[   22.200381] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   22.200997] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.201643] usb usb1: Product: EHCI Host Controller
[   22.202084] usb usb1: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty ehci_hcd
[   22.202728] usb usb1: SerialNumber: fe380000.usb
[   22.203841] hub 1-0:1.0: USB hub found
[   22.204203] hub 1-0:1.0: 1 port detected
[   22.208907] ehci-platform fe3c0000.usb: EHCI Host Controller
[   22.209775] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[   22.210607] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[   22.216784] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[   22.217568] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   22.218193] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.218837] usb usb2: Product: EHCI Host Controller
[   22.219297] usb usb2: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty ehci_hcd
[   22.219954] usb usb2: SerialNumber: fe3c0000.usb
[   22.221139] hub 2-0:1.0: USB hub found
[   22.221502] hub 2-0:1.0: 1 port detected
[   22.222846] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[   22.223821] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[   22.224683] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[   22.233169] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[   22.234459] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
[   22.261361] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[   22.280197] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   22.280848] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.281507] usb usb3: Product: Generic Platform OHCI controller
[   22.282074] usb usb3: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty ohci_hcd
[   22.282753] usb usb3: SerialNumber: fe3a0000.usb
[   22.284834] hub 3-0:1.0: USB hub found
[   22.285248] hub 3-0:1.0: 1 port detected
[   22.287569] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[   22.289251] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[   22.290196] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[   22.346081] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   22.346729] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.347389] usb usb4: Product: Generic Platform OHCI controller
[   22.347957] usb usb4: Manufacturer: Linux 4.4.194-g50f0a60241aa-dirty ohci_hcd
[   22.348637] usb usb4: SerialNumber: fe3e0000.usb
[   22.350539] hub 4-0:1.0: USB hub found
[   22.351022] hub 4-0:1.0: 1 port detected
[   22.353108] input: adc-keys as /devices/platform/adc-keys/input/input3
[   22.356689] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[   22.357397] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[   22.358056] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[   22.358649] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[   22.359770] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[   22.360333] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[   22.361737] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[   22.375735] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   22.389321] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[   22.392489] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[   22.395993] rockchip-cdndp-sound dp-sound: spdif-hifi <-> ff870000.spdif mapping ok
[   22.396763] hdmi-audio-codec hdmi-audio-codec.9.auto: ASoC: Failed to create Playback debugfs file
[   22.398516] input: rockchip-cdndp-sound DP Jack as /devices/platform/dp-sound/sound/card1/input4
[   22.402033] input: gpio-keys as /devices/platform/gpio-keys/input/input5
[   22.403478] ==gsl_ts_init==
[   22.403912] ret=0
[   22.406028] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:55 UTC (1358499055)
[   22.434287] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[   22.436483] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[   22.438637] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[   22.442097] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[   22.446143] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[   22.449468] vcc_mipi: disabling
[   22.449796] dvdd_1v2: disabling
[   22.500419] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[   22.513538] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0.
[   22.517745] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[   22.518288] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[   22.523751] usb 2-1: new high-speed USB device number 2 using ehci-platform
[   22.536880] vendor storage:20190527 ret = 0
[   22.587896] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 231
[   22.588561] mmc0: new ultra high speed SDR104 SDXC card at address aaaa
[   22.591062] mmcblk0: mmc0:aaaa SD64G 59.5 GiB
[   22.609902]mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[   22.640549] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
[   22.641233] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   22.641906] usb 2-1: Product: USB 2.0 Hub
[   22.643883] hub 2-1:1.0: USB hub found
[   22.644460] hub 2-1:1.0: 7 ports detected
[   23.449911] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   23.454755] ret 1024
[   23.456539] I : : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; : 417; : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '14:42:19', on 'May 11 2021'.
[   23.459360] Mali: Mali device driver loaded
[   23.460317] rkisp1 ff910000.rkisp1: clear unready subdev num: 1
[   23.462969] rockchip-mipi-dphy-rx: No link between dphy and sensor
[   23.463542] rockchip-mipi-dphy-rx: No link between dphy and sensor
[   23.464172] rkisp1: update sensor failed
[   23.464552] rkisp1 ff920000.rkisp1: clear unready subdev num: 1
[   23.466827] rockchip-mipi-dphy-rx: No link between dphy and sensor
[   23.467400] rockchip-mipi-dphy-rx: No link between dphy and sensor
[   23.468030] rkisp1: update sensor failed
[   23.469907] ALSA device list:
[   23.470192]   #0: rockchip,hdmi
[   23.470484]   #1: rockchip-cdndp-sound
[   23.472015] Freeing unused kernel memory: 1152K
Loading, please wait...
/dev/console is Ok
starting version 237
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
[   24.856163] EXT4-fs (mmcblk0p7): INFO: recovery required on readonly filesystem
[   24.856866] EXT4-fs (mmcblk0p7): write access will be enabled during recovery
[   24.861957] EXT4-fs (mmcblk0p7): recovery complete
[   24.891933] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Warning: overlayroot: configuring overlayroot with driver=overlay mode=device opts='dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' per kernel cmdline
[   25.175591] EXT4-fs (mmcblk0p8): recovery complete
[   25.177206] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
Success: overlayroot: configured root with 'device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' using overlay per kernel cmdline
Warning: Something odd, no /lib/modules/4.4.194-g50f0a60241aa-dirty in initramfs.
done.
[   25.510380] random: nonblocking pool is initialized
[   25.746092] systemd: System time before build time, advancing clock.
[   25.753786] cgroup: cgroup2: unknown option "nsdelegate"
[   25.772838] systemd: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   25.776274] systemd: Detected architecture arm64.

Welcome to Ubuntu 18.04.4 LTS!

[   25.793645] systemd: Set hostname to <firefly>.
[   26.078480] systemd: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   26.080073] systemd: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   26.473701] systemd: Reached target Remote File Systems.
Reached target Remote File Systems.
[   26.479294] systemd: Created slice System Slice.
Created slice System Slice.
[   26.480908] systemd: Listening on Journal Socket.
Listening on Journal Socket.
[   26.487198] systemd: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[   26.488785] systemd: Listening on udev Control Socket.
Listening on udev Control Socket.
[   26.489895] systemd: Listening on udev Kernel Socket.
Listening on udev Kernel Socket.
[   26.503304] systemd: Created slice system-serial\x2dgetty.slice.
Created slice system-serial\x2dgetty.slice.
[   26.517282] systemd: Mounting POSIX Message Queue File System...
         Mounting POSIX Message Queue File System...
[   26.518301] systemd: Reached target Swap.
Reached target Swap.
[   26.599168] systemd: Starting Create Static Device Nodes in /dev...
         Starting Create Static Device Nodes in /dev...
[   26.609386] systemd: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[   26.611870] systemd: Created slice User and Session Slice.
Created slice User and Session Slice.
[   26.612769] systemd: Reached target Slices.
Reached target Slices.
[   26.613794] systemd: Listening on /dev/initctl Compatibility Named Pipe.
Listening on /dev/initctl Compatibility Named Pipe.
[   26.650809] systemd: Starting Set the console keyboard layout...
         Starting Set the console keyboard layout...
[   26.652517] systemd: Listening on Syslog Socket.
Listening on Syslog Socket.
[   26.713832] systemd: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[   26.735059] systemd: Reached target User and Group Name Lookups.
Reached target User and Group Name Lookups.
[   26.736664] systemd: Listening on Journal Socket (/dev/log).
Listening on Journal Socket (/dev/log).
[   26.740831] systemd: Starting Journal Service...
         Starting Journal Service...
[   26.741913] systemd: Started Forward Password Requests to Wall Directory Watch.
Started Forward Password Requests to Wall Directory Watch.
[   26.747016] systemd: Mounting Kernel Debug File System...
         Mounting Kernel Debug File System...
[   26.754071] systemd: Started Remount Root and Kernel File Systems.
Started Remount Root and Kernel File Systems.
[   26.757868] systemd: Mounted POSIX Message Queue File System.
Mounted POSIX Message Queue File System.
[   26.760995] systemd: Started Create Static Device Nodes in /dev.
Started Create Static Device Nodes in /dev.
[   26.764872] systemd: Mounted Kernel Debug File System.
Mounted Kernel Debug File System.
[   26.770457] systemd: Started Load Kernel Modules.
Started Load Kernel Modules.
[   26.774881] systemd: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[   26.780151] systemd: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[   26.787439] systemd: Mounting Kernel Configuration File System...
         Mounting Kernel Configuration File System...
[   26.793073] systemd: Starting Load/Save Random Seed...
         Starting Load/Save Random Seed...
         Starting udev Kernel Device Manager...
Started Apply Kernel Variables.
Mounted FUSE Control File System.
Mounted Kernel Configuration File System.
Started Load/Save Random Seed.
Started udev Coldplug all Devices.
Started udev Kernel Device Manager.
Started Set the console keyboard layout.
Started Dispatch Password Requests to Console Directory Watch.
Reached target Local Encrypted Volumes.
Reached target Local File Systems (Pre).
Reached target Local File Systems.
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Set console font and keymap...
Started Tell Plymouth To Write Out Runtime Data.
Started Set console font and keymap.
Reached target Sound Card.
Created slice system-systemd\x2dbacklight.slice.
         Starting Load/Save Screen Backlight…ightness of backlight:backlight...
Started Load/Save Screen Backlight Brightness of backlight:backlight.
Started Journal Service.
         Starting Flush Journal to Persistent Storage...
Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
Started Create Volatile Files and Directories.
         Starting Network Name Resolution...
         Starting Network Time Synchronization...
         Starting Update UTMP about System Boot/Shutdown...
Started Update UTMP about System Boot/Shutdown.
Started Network Name Resolution.
Reached target Host and Network Name Lookups.
Started Network Time Synchronization.
Reached target System Initialization.
         Starting Docker Socket for the API.
Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Started Daily Cleanup of Temporary Directories.
Listening on D-Bus System Message Bus Socket.
Reached target Paths.
Reached target System Time Synchronized.
Started Daily apt download activities.
Started Daily apt upgrade and clean activities.
Started Discard unused blocks once a week.
Reached target Timers.
Listening on Docker Socket for the API.
Reached target Sockets.
Reached target Basic System.
         Starting System Logging Service...
         Starting LSB: automatic crash report generation...
         Starting Login Service...
         Starting Modem Manager...
Started Regular background program processing daemon.
         Starting Disk Manager...
         Starting Accounts Service...
         Starting rkisp 3A engine...
         Starting Adbd for linux...
Started D-Bus System Message Bus.
Started Login Service.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Dispatcher daemon for systemd-networkd...
         Starting Save/Restore Sound Card State...
Started Set the CPU Frequency Scaling governor.
         Starting Network Manager...
         Starting WPA supplicant...
         Starting Restore /etc/resolv.conf i…fore the ppp link was shut down...
Started System Logging Service.
Started rkisp 3A engine.
Found device /dev/ttyFIQ0.
Started Restore /etc/resolv.conf if…before the ppp link was shut down.
Started Save/Restore Sound Card State.
Started Avahi mDNS/DNS-SD Stack.
Started WPA supplicant.
         Starting Authorization Manager...
Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Started LSB: automatic crash report generation.
Started Authorization Manager.
Started Accounts Service.
Started Modem Manager.
         Starting Hostname Service...
Started Hostname Service.
Started Disk Manager.
Started Adbd for linux.
         Starting Network Manager Script Dispatcher Service...
Started Network Manager Script Dispatcher Service.
Started Dispatcher daemon for systemd-networkd.
Started Network Manager.
Reached target Network.
         Starting OpenBSD Secure Shell server...
         Starting Permit User Sessions...
         Starting /etc/rc.local Compatibility...
Started Permit User Sessions.
         Starting Light Display Manager...
Started /etc/rc.local Compatibility.
         Starting Hold until boot process finishes up...
Started Hold until boot process finishes up.
         Starting Set console scheme...
Started Serial Getty on ttyFIQ0.
Started Set console scheme.
Created slice system-getty.slice.
Started Getty on tty1.
Reached target Login Prompts.
Started OpenBSD Secure Shell server.
Reached target Multi-User System.
Started Light Display Manager.
Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
Started Update UTMP about System Runlevel Changes.

Ubuntu 18.04.4 LTS firefly ttyFIQ0

firefly login: root (automatic login)

Last login: Sun Jan 28 23:58:22 CST 2018 on ttyFIQ0
_____ _         __ _
|___(_)_ __ ___ / _| |_   _
| |_| | '__/ _ \ |_| | | | |
|_| | | | |__/_| | |_| |
|_|   |_|_|\___|_| |_|\__, |
                        |___/
Welcome to Ubuntu 18.04.4 LTS (GNU/Linux 4.4.194-g50f0a60241aa-dirty aarch64)

* Documentation:http://wiki.t-firefly.com
* Management:   http://www.t-firefly.com

System information as of Sun Jan 28 23:58:23 CST 2018

System load:   0.70 0.16 0.05   Up time:       0 min

saveu 发表于 2021-5-12 12:47:38

RK_IMG_更换EMCC_RK3399.log


DDR Version 1.22 20190506
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg = 0x32817281, stride = 0x9
OUT
Boot1: 2019-03-14, version: 1.19
CPUId = 0x0
ChipType = 0x10, 242
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=61120MB
FwPartOffset=2000 , 0
StorageInit ok = 66475
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:0, name:            uboot, start:0x6000, size:0x2000
GPT part:1, name:            trust, start:0x8000, size:0x2000
GPT part:2, name:             misc, start:0xa000, size:0x2000
GPT part:3, name:             boot, start:0xc000, size:0x10000
GPT part:4, name:         recovery, start:0x1c000, size:0x10000
GPT part:5, name:         backup, start:0x2c000, size:0x10000
GPT part:6, name:         rootfs, start:0x5c000, size:0x7703800
find part:uboot OK. first_lba:0x6000.
find part:trust OK. first_lba:0x8000.
LoadTrust Addr:0x8000
No find bl30.bin
Load uboot, ReadLba = 6000
Load OK, addr=0x200000, size=0xe402c
RunBL31 0x10000
NOTICE:BL31: v1.3(debug):51f2096
NOTICE:BL31: Built : 16:24:31, May6 2019
NOTICE:BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1181): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-221-gda2bcfdc #139 Mon Jun 17 03:14:33 UTC 2019 aarch64)

INF TEE-CORE:init_primary_helper:338: Release version: 1.2

INF TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-03043-ga246c18240 (May 07 2020 - 10:07:25 +0800)

Model: ROC-RK3399-PC Board
PreSerial: 2
DRAM:2 GiB
Sysmem: init
Relocation Offset is: 7dbeb000
I2c speed: 400000Hz
PMIC:RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd-log init 1100000 uV
MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
Using default environment

In:    serial
Out:   serial
Err:   serial
Model: ROC-RK3399-PC Board
switch to partitions #0, OK
mmc1 is current device
do_rkimg_test found IDB in SDcard
do_rkimg_test found IDB in SDcard
Bootdev(atags): mmc 1
MMC1: Legacy, 50Mhz
PartType: EFI
boot mode: None
Load FDT from boot part
Rockchip UBOOT DRM driver version: v1.0.1
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 24000 KHz, init 24000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 24000 KHz
dpll 800000 KHz
cpll 24000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 24000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):0
ANDROID: reboot reason: "(none)"
DTB: rk-kernel.dtb
Fdt Ramdisk skip relocation
Booting IMAGE kernel at 0x00280000 with fdt at 0x8300000...


## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 18703 KiB
RAM disk load addr 0x0a200000 size 9162 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image ... OK
'reserved-memory' region@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831c8f4
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
Can't find file:logo_kernel.bmp
Total: 2953.581 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.179-ge8a4ccd64f8f-dirty (jincheng@jincheng-H310M-H-2-0) (local/firefly-linux/rk3399/firefly: e8a4ccd64f8feb7072ed928ab0a6132cbcb7cff6) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #392 SMP Thu May 7 15:02:57 CST 2020
[    0.000000] Boot CPU: AArch64 Processor
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fedf000 s46184 r8192 d31640 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 507912
[    0.000000] Kernel command line: sdfwupdate sdfwupdate storagemedia=sd androidboot.storagemedia=sd androidboot.mode=normal androidboot.slot_suffix= androidboot.serialno=139c4730f61dff04rw rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.000000] software IO TLB: mapped (0MB)
[    0.000000] Memory: 1996528K/2064384K available (11390K kernel code, 1614K rwdata, 4492K rodata, 1152K init, 1912K bss, 67856K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]   modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]   vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009010000 - 0xffffff8009130000   (1152 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008ba0000   ( 11392 KB)
[    0.000000]   .rodata : 0xffffff8008ba0000 - 0xffffff8009010000   (4544 KB)
[    0.000000]       .data : 0xffffff8009130000 - 0xffffff80092c3808   (1615 KB)
[    0.000000]   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (   8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
[    0.000000]   fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (4116 KB)
[    0.000000]   PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]   memory: 0xffffffc000200000 - 0xffffffc080000000   (2046 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]Build-time adjustment of leaf fanout to 64.
[    0.000000]RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @7d480000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x000000007d410000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x000000007d420000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[    0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002286] Console: colour dummy device 80x25
[    0.002727] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003718] pid_max: default: 32768 minimum: 301
[    0.004247] Security Framework initialized
[    0.004714] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.005355] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.006753] Initializing cgroup subsys devices
[    0.007201] Initializing cgroup subsys freezer
[    0.007637] Initializing cgroup subsys net_prio
[    0.008089] ftrace: allocating 42619 entries in 167 pages
[    0.119322] sched-energy: Sched-energy-costs installed from DT
[    0.119889] CPU0: update cpu_capacity 401
[    0.120336] ASID allocator initialised with 32768 entries
[    0.124052] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.125451] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.127711] Detected VIPT I-cache on CPU1
[    0.127742] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.127772] CPU1: using LPI pending table @0x000000007d6a0000
[    0.127815] CPU1: update cpu_capacity 401
[    0.127818] CPU1: Booted secondary processor
[    0.128368] Detected VIPT I-cache on CPU2
[    0.128388] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.128415] CPU2: using LPI pending table @0x000000007d6d0000
[    0.128441] CPU2: update cpu_capacity 401
[    0.128445] CPU2: Booted secondary processor
[    0.128983] Detected VIPT I-cache on CPU3
[    0.129003] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.129030] CPU3: using LPI pending table @0x000000007d720000
[    0.129055] CPU3: update cpu_capacity 401
[    0.129058] CPU3: Booted secondary processor
[    0.129618] Detected PIPT I-cache on CPU4
[    0.129646] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.129684] CPU4: using LPI pending table @0x000000007d750000
[    0.129722] CPU4: update cpu_capacity 1024
[    0.129726] CPU4: Booted secondary processor
[    0.130283] Detected PIPT I-cache on CPU5
[    0.130302] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.130337] CPU5: using LPI pending table @0x000000007d780000
[    0.130363] CPU5: update cpu_capacity 1024
[    0.130366] CPU5: Booted secondary processor
[    0.130464] Brought up 6 CPUs
[    0.142835] SMP: Total of 6 processors activated.
[    0.143287] CPU features: detected feature: GIC system register CPU interface
[    0.143976] CPU features: detected feature: 32-bit EL0 Support
[    0.144535] CPU: All CPU(s) started at EL2
[    0.144967] alternatives: patching kernel code
[    0.146794] devtmpfs: initialized
[    0.164911] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.165828] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.166868] xor: measuring software checksum speed
[    0.176715]    8regs   :2856.000 MB/sec
[    0.186773]    8regs_prefetch:2564.000 MB/sec
[    0.196829]    32regs    :3208.000 MB/sec
[    0.206887]    32regs_prefetch:2848.000 MB/sec
[    0.207313] xor: using function: 32regs (3208.000 MB/sec)
[    0.207833] pinctrl core: initialized pinctrl subsystem
[    0.209088] NET: Registered protocol family 16
[    0.215879] cpuidle: using governor ladder
[    0.219890] cpuidle: using governor menu
[    0.220273] Registered FIQ tty driver
[    0.221029] vdso: 2 pages (1 code @ ffffff8008ba6000, 1 data @ ffffff8009134000)
[    0.221736] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.222912] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.247296] console enabled
[    0.247651] pstore: Registered ramoops as persistent store backend
[    0.248239] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.251570] console enabled
[    0.251570] console enabled
[    0.252238] bootconsole disabled
[    0.252238] bootconsole disabled
[    0.253170] Registered fiq debugger ttyFIQ0
[    0.284438] raid6: int64x1gen()   449 MB/s
[    0.301525] raid6: int64x1xor()   351 MB/s
[    0.318541] raid6: int64x2gen()   781 MB/s
[    0.335674] raid6: int64x2xor()   595 MB/s
[    0.352734] raid6: int64x4gen()1074 MB/s
[    0.369862] raid6: int64x4xor()   671 MB/s
[    0.386966] raid6: int64x8gen()   902 MB/s
[    0.404065] raid6: int64x8xor()   640 MB/s
[    0.421161] raid6: neonx1   gen()   914 MB/s
[    0.438251] raid6: neonx1   xor()   615 MB/s
[    0.455347] raid6: neonx2   gen()1523 MB/s
[    0.472429] raid6: neonx2   xor()   990 MB/s
[    0.489531] raid6: neonx4   gen()1921 MB/s
[    0.506632] raid6: neonx4   xor()1230 MB/s
[    0.523719] raid6: neonx8   gen()1691 MB/s
[    0.540817] raid6: neonx8   xor()1263 MB/s
[    0.541199] raid6: using algorithm neonx4 gen() 1921 MB/s
[    0.541679] raid6: .... xor() 1230 MB/s, rmw enabled
[    0.542124] raid6: using intx1 recovery algorithm
[    0.547989] iommu: Adding device ff650000.vpu_service to group 0
[    0.548592] iommu: Adding device ff660000.rkvdec to group 1
[    0.549203] iommu: Adding device ff8f0000.vop to group 2
[    0.549759] iommu: Adding device ff900000.vop to group 3
[    0.550322] iommu: Adding device ff910000.rkisp1 to group 4
[    0.550900] iommu: Adding device ff920000.rkisp1 to group 5
[    0.551882] rk_iommu ff650800.iommu: can't get sclk
[    0.552588] rk_iommu ff660480.iommu: can't get sclk
[    0.553229] rk_iommu ff8f3f00.iommu: can't get sclk
[    0.553834] rk_iommu ff903f00.iommu: can't get sclk
[    0.554433] rk_iommu ff914000.iommu: can't get sclk
[    0.555041] rk_iommu ff924000.iommu: can't get sclk
[    0.555832] SCSI subsystem initialized
[    0.556543] usbcore: registered new interface driver usbfs
[    0.557078] usbcore: registered new interface driver hub
[    0.557645] usbcore: registered new device driver usb
[    0.558147] media: Linux media interface: v0.10
[    0.558586] Linux video capture interface: v2.00
[    0.559077] pps_core: LinuxPPS API ver. 1 registered
[    0.559523] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.560355] PTP clock support registered
[    0.561864] Advanced Linux Sound Architecture Driver Initialized.
[    0.562885] Bluetooth: Core ver 2.21
[    0.563225] NET: Registered protocol family 31
[    0.563635] Bluetooth: HCI device and connection manager initialized
[    0.564202] Bluetooth: HCI socket layer initialized
[    0.564647] Bluetooth: L2CAP socket layer initialized
[    0.565110] Bluetooth: SCO socket layer initialized
[    0.566160] rockchip-cpuinfo cpuinfo: Serial         : 139c4730f61dff04
[    0.567403] clocksource: Switched to clocksource arch_sys_counter
[    0.617699] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.618627] NET: Registered protocol family 2
[    0.619452] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.620225] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[    0.621275] TCP: Hash tables configured (established 16384 bind 16384)
[    0.621944] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[    0.622575] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[    0.623418] NET: Registered protocol family 1
[    0.624102] RPC: Registered named UNIX socket transport module.
[    0.624646] RPC: Registered udp transport module.
[    0.625068] RPC: Registered tcp transport module.
[    0.625498] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.626775] Trying to unpack rootfs image as initramfs...
[    1.071809] Freeing initrd memory: 9160K
[    1.072840] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.073666] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.077635] Initialise system trusted keyring
[    1.086174] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.087497] NFS: Registering the id_resolver key type
[    1.087965] Key type id_resolver registered
[    1.088341] Key type id_legacy registered
[    1.088945] fuse init (API version 7.23)
[    1.089658] SGI XFS with security attributes, no debug enabled
[    1.095389] NET: Registered protocol family 38
[    1.095820] Key type asymmetric registered
[    1.096192] Asymmetric key parser 'x509' registered
[    1.096815] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.097528] io scheduler noop registered
[    1.097888] io scheduler deadline registered
[    1.098414] io scheduler cfq registered (default)
[    1.105857] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.106461] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.107051] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.107624] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.108228] PCI host bridge /pcie@f8000000 ranges:
[    1.108673]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.109134]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    1.651466] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.652088] rockchip-pcie f8000000.pcie: deferred probe failed
[    1.652733] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    1.654233] backlight supply power not found, using dummy regulator
[    1.655647] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    1.656603] rk-vcodec ff650000.vpu_service: probe device
[    1.657357] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    1.658750] rk-vcodec ff650000.vpu_service: could not find power_model node
[    1.659371] rk-vcodec ff650000.vpu_service: init success
[    1.660286] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    1.661335] rk-vcodec ff660000.rkvdec: probe device
[    1.662025] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    1.663013] rk-vcodec ff660000.rkvdec: could not find power_model node
[    1.663604] rk-vcodec ff660000.rkvdec: init success
[    1.665552] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.666225] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.668477] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.669148] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.671022] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.672896] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.674086] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 38, base_baud = 1500000) is a 16550A
[    1.676010] Initialized drm 1.1.0 20060810
[    1.680425] Rockchip DRM driver version: v1.0.1
[    1.683076] mali ff9a0000.gpu: Failed to get regulator
[    1.683548] mali ff9a0000.gpu: Power control initialization failed
[    1.684481] Unable to detect cache hierarchy for CPU 0
[    1.685683] brd: module loaded
[    1.691017] loop: module loaded
[    1.691841] zram: Added device: zram0
[    1.692499] lkdtm: No crash points registered, enable through debugfs
[    1.694645] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    1.696043] register spi return v = :0
[    1.696437] register firefly_spi_init spi return v = :0
[    1.698349] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    1.698989] rk_gmac-dwmac fe300000.ethernet: TX delay(0x2e).
[    1.699505] rk_gmac-dwmac fe300000.ethernet: RX delay(0x13).
[    1.700025] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    1.700754] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    1.701374] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    1.706929] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    1.707542] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.707987]Ring mode enabled
[    1.708260]DMA HW capability register supported
[    1.708669]Normal descriptors
[    1.708979]RX Checksum Offload Engine supported (type 2)
[    1.709476]TX Checksum insertion supported
[    1.709852]Wake-Up On Lan supported
[    1.710213]Enable RX Mitigation via HW Watchdog Timer
[    1.780602] libphy: stmmac: probed
[    1.780920] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.781505] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.783443] usbcore: registered new interface driver rndis_wlan
[    1.784173] Rockchip WiFi SYS interface (V1.00) ...
[    1.784769] usbcore: registered new interface driver rtl8150
[    1.785335] usbcore: registered new interface driver r8152
[    1.785900] usbcore: registered new interface driver asix
[    1.786449] usbcore: registered new interface driver ax88179_178a
[    1.787036] usbcore: registered new interface driver cdc_ether
[    1.787614] usbcore: registered new interface driver rndis_host
[    1.788228] usbcore: registered new interface driver cdc_ncm
[    1.788793] usbcore: registered new interface driver qmi_wwan
[    1.789362] usbcore: registered new interface driver cdc_mbim
[    1.791999] rockchip-dwc3 usb0: failed to get drvdata dwc3
[    1.793877] rockchip-dwc3 usb1: failed to get drvdata dwc3
[    1.795865] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.796489] ehci-pci: EHCI PCI platform driver
[    1.796959] ehci-platform: EHCI generic platform driver
[    1.798371] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.798965] ohci-platform: OHCI generic platform driver
[    1.800816] usbcore: registered new interface driver cdc_acm
[    1.801321] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.802095] usbcore: registered new interface driver cdc_wdm
[    1.802661] usbcore: registered new interface driver uas
[    1.803193] usbcore: registered new interface driver usb-storage
[    1.803840] usbcore: registered new interface driver usbserial
[    1.804389] usbcore: registered new interface driver usbserial_generic
[    1.805022] usbserial: USB Serial support registered for generic
[    1.805614] usbcore: registered new interface driver ch341
[    1.806134] usbserial: USB Serial support registered for ch341-uart
[    1.806800] usbcore: registered new interface driver cp210x
[    1.807321] usbserial: USB Serial support registered for cp210x
[    1.807897] usbcore: registered new interface driver ftdi_sio
[    1.808447] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.809121] usbcore: registered new interface driver keyspan
[    1.809656] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    1.810370] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    1.811045] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    1.811718] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    1.812390] usbcore: registered new interface driver option
[    1.812914] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.813571] usbcore: registered new interface driver oti6858
[    1.814093] usbserial: USB Serial support registered for oti6858
[    1.814659] usbcore: registered new interface driver pl2303
[    1.815175] usbserial: USB Serial support registered for pl2303
[    1.815741] usbcore: registered new interface driver qcserial
[    1.816275] usbserial: USB Serial support registered for Qualcomm USB modem
[    1.816934] usbcore: registered new interface driver sierra
[    1.817457] usbserial: USB Serial support registered for Sierra USB modem
[    1.819197] usbcore: registered new interface driver usbtouchscreen
[    1.820032] .. rk pwm remotectl v1.1 init
[    1.820649] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    1.821709] sensor_register_slave:mma8452,id=17
[    1.822115] sensor_register_slave:lis3dh,id=7
[    1.822522] sensor_register_slave:mma7660,id=18
[    1.822926] sensor_register_slave:lsm303d,id=22
[    1.823329] sensor_register_slave:gs_mc3230,id=23
[    1.823758]    gsensor_init
[    1.824082] sensor_register_slave:mpu6880_acc,id=24
[    1.824526] sensor_register_slave:mpu6500_acc,id=25
[    1.824964] sensor_register_slave:lsm330_acc,id=26
[    1.825390] sensor_register_slave:akm8975,id=30
[    1.825802] sensor_register_slave:akm8963,id=31
[    1.826206] sensor_register_slave:l3g4200d,id=45
[    1.826628] sensor_register_slave:l3g20d,id=46
[    1.827030] sensor_register_slave:ewtsa,id=47
[    1.827430] sensor_register_slave:lsm330_gyro,id=51
[    1.827867] sensor_register_slave:cm3217,id=53
[    1.828269] sensor_register_slave:cm3218,id=54
[    1.829168] i2c /dev entries driver
[    1.830786] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[    1.831490] fan53555-reg: supplied by vcc5v0_sys
[    1.834293] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[    1.834974] fan53555-reg: supplied by vcc5v0_sys
[    1.837825] rk808 0-001b: Pmic Chip id: 0x0
[    1.841641] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.842247] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.842902] DCDC_REG1: supplied by vcc3v3_sys
[    1.844083] DCDC_REG2: supplied by vcc3v3_sys
[    1.845094] DCDC_REG3: supplied by vcc3v3_sys
[    1.845821] DCDC_REG4: supplied by vcc3v3_sys
[    1.846705] LDO_REG1: supplied by vcc3v3_sys
[    1.848243] LDO_REG2: supplied by vcc3v3_sys
[    1.849668] LDO_REG3: supplied by vcc3v3_sys
[    1.851063] LDO_REG4: supplied by vcc3v3_sys
[    1.852488] LDO_REG5: supplied by vcc3v3_sys
[    1.853887] LDO_REG6: supplied by vcc3v3_sys
[    1.855280] LDO_REG7: supplied by vcc3v3_sys
[    1.856714] LDO_REG8: supplied by vcc3v3_sys
[    1.858120] SWITCH_REG1: supplied by vcc3v3_sys
[    1.858874] SWITCH_REG2: supplied by vcc3v3_sys
[    1.862732] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.863807] rk808 0-001b: Can not read property pmic,stby-gpio
[    1.864350] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80096c6000
[    1.865760] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80096ce000
[    1.866991] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80096de000
[    1.868799] fusb302 7-0022: Can't get property of role, set role to default DRP
[    2.869459] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    2.869995] fusb302 7-0022: fusb302 send extcon to disable vbus 5v
[    3.870441] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    4.870434] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    5.870435] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    6.870430] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    7.870434] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    8.870434] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[    9.870433] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   10.870434] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   11.870433] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   12.870433] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   13.870433] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   14.870432] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   15.870432] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   16.870433] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   17.870433] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   18.870433] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   19.870433] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   19.871333] fusb302 7-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[   19.872286] input: Typec_Headphone as /devices/platform/ff160000.i2c/i2c-7/7-0022/input/input1
[   20.873461] rk3x-i2c ff160000.i2c: timeout, ipd: 0x00, state: 1
[   20.873999] mp8859 7-0066: failed to set slew_rate
[   20.874450] mp8859 7-0066: register ext0 dev0
[   20.875013] mp8859 7-0066: mp8859 probe successful
[   20.875882] rk3x-i2c ff160000.i2c: Initialized RK3xxx I2C bus at ffffff80096f2000
[   20.878570] fusb302 4-0022: Can't get property of role, set role to default DRP
[   20.888725] fusb302 4-0022: port 1 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[   20.889725] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input2
[   20.890748] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80096f4000
[   20.893070] IR NEC protocol handler initialized
[   20.894655] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.04
[   20.895239] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[   20.898221] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.04
[   20.898824] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[   20.901689] usbcore: registered new interface driver uvcvideo
[   20.902204] USB Video Class driver (1.1.1)
[   20.902678] cw201x 2-0062: design_capacity missing!
[   21.902475] rk3x-i2c ff120000.i2c: timeout, ipd: 0x00, state: 1
[   21.903008] cw_bat_probe cw_init error
[   21.903363] cw201x: probe of 2-0062 failed with error -110
[   21.906779] Boot mode: coldboot
[   21.908496] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[   21.909530] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[   21.911140] dw_wdt ff848000.watchdog: Should better to setup a 'resets' property in dt, that must been named with reset
[   21.913053] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[   21.914198] Bluetooth: Virtual HCI driver ver 1.5
[   21.914804] Bluetooth: HCI UART driver ver 2.3
[   21.915207] Bluetooth: HCI UART protocol H4 registered
[   21.915679] Bluetooth: HCI UART protocol LL registered
[   21.916136] Bluetooth: HCI UART protocol ATH3K registered
[   21.916710] usbcore: registered new interface driver bfusb
[   21.917261] usbcore: registered new interface driver btusb
[   21.918486] cpu cpu0: bin=1
[   21.918819] cpu cpu0: leakage=23
[   21.932238] cpu cpu0: temp=39375, pvtm=145693 (145923 + -230)
[   21.933150] cpu cpu0: pvtm-volt-sel=1
[   21.933579] cpu cpu0: bin-scale=34
[   21.934317] cpu cpu4: bin=1
[   21.934707] cpu cpu4: leakage=40
[   21.947189] cpu cpu4: temp=38750, pvtm=153523 (153736 + -213)
[   21.947851] cpu cpu4: pvtm-volt-sel=1
[   21.948251] cpu cpu4: bin-scale=17
[   21.950285] cpu cpu0: avs=0
[   21.950700] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   21.952225] cpu cpu0: failed to find power_model node
[   21.954186] cpu cpu4: avs=0
[   21.954608] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   21.957071] cpu cpu4: failed to find power_model node
[   21.958711] sdhci: Secure Digital Host Controller Interface driver
[   21.959260] sdhci: Copyright(c) Pierre Ossman
[   21.959672] Synopsys Designware Multimedia Card Interface Driver
[   21.961572] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[   21.962242] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[   21.962877] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[   21.963460] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[   21.964461] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[   21.965011] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[   21.966957] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[   21.967646] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[   21.968259] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[   21.968830] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[   21.969716] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[   21.971082] vccio_sd: unsupportable voltage range: 3300000-3000000uV
[   21.972551] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[   21.973218] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[   21.984469] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   21.995495] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[   21.996621] sdhci-pltfm: SDHCI platform and OF driver helper
[   21.999111] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[   21.999664] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[   22.024514] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[   22.025373] rockchip-iodomain ff770000.syscon:io-domains: Setting to 1800000 done
[   22.026520] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[   22.029132] hidraw: raw HID events driver (C) Jiri Kosina
[   22.030286] usbcore: registered new interface driver usbhid
[   22.030814] usbhid: USB HID core driver
[   22.031316] inv_mpu_iio: inv_mpu_init:746
[   22.035551] usbcore: registered new interface driver snd-usb-audio
[   22.044080] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered
[   22.044800] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517
[   22.045808] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   22.046699] mmc_host mmc0: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[   22.046963] IPVS: Registered protocols (TCP, UDP)
[   22.047149] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[   22.047290] IPVS: Creating netns size=2104 id=0
[   22.047334] IPVS: ipvs loaded.
[   22.047344] IPVS: scheduler registered.
[   22.047682] ip_tables: (C) 2000-2006 Netfilter Core Team
[   22.047857] Initializing XFRM netlink socket
[   22.048717] NET: Registered protocol family 10
[   22.049807] NET: Registered protocol family 17
[   22.049834] NET: Registered protocol family 15
[   22.049875] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   22.049903] Bridge firewalling registered
[   22.050212] Bluetooth: RFCOMM socket layer initialized
[   22.050244] Bluetooth: RFCOMM ver 1.11
[   22.050263] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   22.050273] Bluetooth: HIDP socket layer initialized
[   22.050349] : Enter rfkill_wlan_init
[   22.050895] : Enter rfkill_rk_init
[   22.051210] Key type dns_resolver registered
[   22.051476] sensor_register_slave:mpu6880_gyro,id=50
[   22.052215] ov13850 1-0036: driver version: 00.01.01
[   22.056376] ov13850 1-0036: write SCCB_ID failed
[   22.056611] ov13850: probe of 1-0036 failed with error -5
[   22.056954] ov13850 1-0046: driver version: 00.01.01
[   22.060019] ov13850 1-0046: write SCCB_ID failed
[   22.060657] ov13850: probe of 1-0046 failed with error -5
[   22.062356] Registered cp15_barrier emulation handler
[   22.062939] Registered setend emulation handler
[   22.065047] Loading compiled-in X.509 certificates
[   22.068368] Btrfs loaded
[   22.070277] rga2: Driver loaded successfully ver:3.02
[   22.071044] rga2: Module initialized.
[   22.075469] phy phy-ff770000.syscon:usb2-phy@e450.3: Failed to get VBUS supply regulator
[   22.079281] phy phy-ff770000.syscon:usb2-phy@e460.5: Failed to get VBUS supply regulator
[   22.083786] rockchip-drm display-subsystem: dmc is disabled
[   22.084862] rockchip-vop ff900000.vop: missing rockchip,grf property
[   22.085969] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008c5d628)
[   22.086778] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[   22.087722] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008c5d628)
[   22.089217] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[   22.089896] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[   22.090811] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[   22.096236] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008c52348)
[   22.098052] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
[   22.099282] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[   22.100187] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008c53398)
[   22.100949] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   22.101554] No driver support for vblank timestamp query.
[   22.102458] rockchip-drm display-subsystem: connector can't found any modes
[   22.103222] rockchip-drm display-subsystem: can't not find any loader display
[   22.103918] rockchip-drm display-subsystem: failed to show loader logo
[   22.104727] Freeing drm_logo memory: 616K
[   22.105106] rockchip-drm display-subsystem: No connectors reported connected with modes
[   22.105838] Cannot find any crtc or sizes - going 1024x768
[   22.106268] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[   22.107218] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[   22.108378] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[   22.109600] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[   22.110930] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[   22.121249] Console: switching to colour frame buffer device 128x48
[   22.130069] rockchip-drm display-subsystem: fb0:frame buffer device
[   22.136428] mali ff9a0000.gpu: leakage=28
[   22.161710] mali ff9a0000.gpu: temp=38750, pvtm=122440 (122578 + -138)
[   22.163786] mali ff9a0000.gpu: pvtm-volt-sel=1
[   22.165042] mali ff9a0000.gpu: avs=0
[   22.166445] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[   22.168432] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[   22.169277] I : : drivers/gpu/arm/midgard_for_linux/backend/gpu/mali_kbase_devfreq.c; : 315; : kbase_devfreq_init(); success initing power_model_simple.
[   22.171561] mali ff9a0000.gpu: Probed as mali0
[   22.176623] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[   22.177286] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 1
[   22.178125] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[   22.178948] xhci-hcd xhci-hcd.10.auto: irq 230, io mem 0xfe800000
[   22.179704] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   22.180305] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.180964] usb usb1: Product: xHCI Host Controller
[   22.181410] usb usb1: Manufacturer: Linux 4.4.179-ge8a4ccd64f8f-dirty xhci-hcd
[   22.182053] usb usb1: SerialNumber: xhci-hcd.10.auto
[   22.182963] hub 1-0:1.0: USB hub found
[   22.183329] hub 1-0:1.0: 1 port detected
[   22.184000] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[   22.184637] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 2
[   22.185370] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[   22.186186] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[   22.186801] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.187456] usb usb2: Product: xHCI Host Controller
[   22.187892] usb usb2: Manufacturer: Linux 4.4.179-ge8a4ccd64f8f-dirty xhci-hcd
[   22.188544] usb usb2: SerialNumber: xhci-hcd.10.auto
[   22.189422] hub 2-0:1.0: USB hub found
[   22.189787] hub 2-0:1.0: 1 port detected
[   22.191597] xhci-hcd xhci-hcd.10.auto: remove, state 1
[   22.192078] usb usb2: USB disconnect, device number 1
[   22.195679] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[   22.196331] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 3
[   22.197179] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[   22.198006] xhci-hcd xhci-hcd.11.auto: irq 231, io mem 0xfe900000
[   22.198753] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[   22.199354] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.200014] usb usb3: Product: xHCI Host Controller
[   22.200459] usb usb3: Manufacturer: Linux 4.4.179-ge8a4ccd64f8f-dirty xhci-hcd
[   22.201102] usb usb3: SerialNumber: xhci-hcd.11.auto
[   22.201981] hub 3-0:1.0: USB hub found
[   22.202347] hub 3-0:1.0: 1 port detected
[   22.202986] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[   22.203619] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 4
[   22.204357] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[   22.205170] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[   22.205784] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.206436] usb usb4: Product: xHCI Host Controller
[   22.206872] usb usb4: Manufacturer: Linux 4.4.179-ge8a4ccd64f8f-dirty xhci-hcd
[   22.207522] usb usb4: SerialNumber: xhci-hcd.11.auto
[   22.208386] hub 4-0:1.0: USB hub found
[   22.208766] hub 4-0:1.0: 1 port detected
[   22.212057] ehci-platform fe380000.usb: EHCI Host Controller
[   22.212754] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[   22.213572] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[   22.216475] xhci-hcd xhci-hcd.10.auto: Host not halted after 16000 microseconds.
[   22.217135] xhci-hcd xhci-hcd.10.auto: Host controller not halted, aborting reset.
[   22.217849] xhci-hcd xhci-hcd.10.auto: USB bus 2 deregistered
[   22.218585] xhci-hcd xhci-hcd.11.auto: remove, state 1
[   22.219058] usb usb4: USB disconnect, device number 1
[   22.219985] xhci-hcd xhci-hcd.11.auto: USB bus 4 deregistered
[   22.220004] xhci-hcd xhci-hcd.10.auto: remove, state 1
[   22.220028] usb usb1: USB disconnect, device number 1
[   22.221473] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[   22.221890] xhci-hcd xhci-hcd.10.auto: USB bus 1 deregistered
[   22.222784] xhci-hcd xhci-hcd.11.auto: remove, state 1
[   22.223316] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[   22.223935] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.224584] usb usb5: Product: EHCI Host Controller
[   22.225018] usb usb5: Manufacturer: Linux 4.4.179-ge8a4ccd64f8f-dirty ehci_hcd
[   22.225665] usb usb5: SerialNumber: fe380000.usb
[   22.226454] hub 5-0:1.0: USB hub found
[   22.226814] hub 5-0:1.0: 1 port detected
[   22.227390] usb usb3: USB disconnect, device number 1
[   22.228294] xhci-hcd xhci-hcd.11.auto: USB bus 3 deregistered
[   22.233123] ehci-platform fe3c0000.usb: EHCI Host Controller
[   22.234052] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[   22.234932] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[   22.241494] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[   22.242266] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   22.242893] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.243549] usb usb1: Product: EHCI Host Controller
[   22.243986] usb usb1: Manufacturer: Linux 4.4.179-ge8a4ccd64f8f-dirty ehci_hcd
[   22.244641] usb usb1: SerialNumber: fe3c0000.usb
[   22.245809] hub 1-0:1.0: USB hub found
[   22.246191] hub 1-0:1.0: 1 port detected
[   22.247632] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[   22.248592] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 2
[   22.249465] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[   22.305011] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[   22.305674] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.306327] usb usb2: Product: Generic Platform OHCI controller
[   22.306897] usb usb2: Manufacturer: Linux 4.4.179-ge8a4ccd64f8f-dirty ohci_hcd
[   22.307571] usb usb2: SerialNumber: fe3a0000.usb
[   22.309381] hub 2-0:1.0: USB hub found
[   22.309824] hub 2-0:1.0: 1 port detected
[   22.312134] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[   22.313373] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 3
[   22.314332] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[   22.340846] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 176
[   22.341561] mmc0: new ultra high speed SDR104 SDXC card at address 59b4
[   22.344669] mmcblk0: mmc0:59b4 EC1S5 59.7 GiB
[   22.355687]mmcblk0: p1 p2 p3 p4 p5 p6 p7
[   22.369931] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   22.370588] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[   22.371241] usb usb3: Product: Generic Platform OHCI controller
[   22.371811] usb usb3: Manufacturer: Linux 4.4.179-ge8a4ccd64f8f-dirty ohci_hcd
[   22.372486] usb usb3: SerialNumber: fe3e0000.usb
[   22.374797] hub 3-0:1.0: USB hub found
[   22.375221] hub 3-0:1.0: 1 port detected
[   22.377444] input: adc-keys as /devices/platform/adc-keys/input/input3
[   22.381577] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[   22.382289] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[   22.382946] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[   22.383535] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[   22.384673] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[   22.385239] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[   22.386703] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[   22.399782] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[   22.411583] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[   22.414240] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[   22.418242] rockchip-cdndp-sound dp-sound: spdif-hifi <-> ff870000.spdif mapping ok
[   22.419018] hdmi-audio-codec hdmi-audio-codec.9.auto: ASoC: Failed to create Playback debugfs file
[   22.420824] input: rockchip-cdndp-sound DP Jack as /devices/platform/dp-sound/sound/card1/input4
[   22.424541] input: gpio-keys as /devices/platform/gpio-keys/input/input5
[   22.425857] ==gsl_ts_init==
[   22.426245] ret=0
[   22.428980] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:26 UTC (1358499026)
[   22.449444] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[   22.451655] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[   22.453831] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[   22.456539] vcc_mipi: disabling
[   22.456832] dvdd_1v2: disabling
[   22.457441] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[   22.457999] ret 1024
[   22.459705] I : : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; : 417; : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '15:00:00', on 'May7 2020'.
[   22.462826] Mali: Mali device driver loaded
[   22.463384] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[   22.463942] rkisp1 ff910000.rkisp1: clear unready subdev num: 1
[   22.465653] rockchip-mipi-dphy-rx: No link between dphy and sensor
[   22.466253] rkisp1 ff910000.rkisp1: failed to get fmt for rockchip-mipi-dphy-rx
[   22.466981] rkisp1 ff920000.rkisp1: clear unready subdev num: 1
[   22.468626] rockchip-mipi-dphy-rx: No link between dphy and sensor
[   22.469227] rkisp1 ff920000.rkisp1: failed to get fmt for rockchip-mipi-dphy-rx
[   22.471346] ALSA device list:
[   22.471693]   #0: rockchip,hdmi
[   22.471990]   #1: rockchip-cdndp-sound
[   22.473684] Freeing unused kernel memory: 1152K
Loading, please wait...
[   22.524706] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[   22.548614] usb 1-1: new high-speed USB device number 2 using ehci-platform
[   22.550915] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0.
[   22.555504] vendor storage:20190527 ret = 0
[   22.560246] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[   22.560836] mmc2: new ultra high speed SDR104 SDIO card at address 0001
starting version 237
[   22.671584] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[   22.672196] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[   22.672842] usb 1-1: Product: USB 2.0 Hub
[   22.674218] hub 1-1:1.0: USB hub found
[   22.674868] hub 1-1:1.0: 7 ports detected
[   23.100463] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
[   23.771436] random: nonblocking pool is initialized
[   23.877480] EXT4-fs (mmcblk0p7): recovery complete
[   23.880152] EXT4-fs (mmcblk0p7): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Failure: overlayroot: failed to convert PARTLABEL=userdata to a device
Failure: overlayroot: failed setup overlay for device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 (per kernel cmdline)
Warning: Something odd, no /lib/modules/4.4.179-ge8a4ccd64f8f-dirty in initramfs.
done.
[   24.615266] systemd: System time before build time, advancing clock.
[   24.622884] cgroup: cgroup2: unknown option "nsdelegate"
[   24.640519] systemd: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[   24.643910] systemd: Detected architecture arm64.

Welcome to Ubuntu 18.04.4 LTS!

[   24.657239] systemd: Set hostname to <firefly>.
[   24.936250] systemd: File /lib/systemd/system/systemd-udevd.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
[   24.937776] systemd: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
[   25.106365] cdn-dp fec00000.dp: Not connected. Disabling cdn
[   25.196982] systemd: Reached target Remote File Systems.
Reached target Remote File Systems.
[   25.198606] systemd: Started Forward Password Requests to Wall Directory Watch.
Started Forward Password Requests to Wall Directory Watch.
[   25.199729] systemd: Reached target Swap.
Reached target Swap.
[   25.202225] systemd: Created slice System Slice.
Created slice System Slice.
[   25.203628] systemd: Listening on Journal Socket (/dev/log).
Listening on Journal Socket (/dev/log).
[   25.204904] systemd: Listening on Journal Socket.
Listening on Journal Socket.
[   25.210199] systemd: Starting Create Static Device Nodes in /dev...
         Starting Create Static Device Nodes in /dev...
[   25.235006] systemd: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[   25.266793] systemd: Listening on /dev/initctl Compatibility Named Pipe.
Listening on /dev/initctl Compatibility Named Pipe.
[   25.270334] systemd: Listening on udev Control Socket.
Listening on udev Control Socket.
[   25.277280] systemd: Mounting Kernel Debug File System...
         Mounting Kernel Debug File System...
[   25.284657] systemd: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[   25.288925] systemd: Created slice User and Session Slice.
Created slice User and Session Slice.
[   25.290042] systemd: Reached target User and Group Name Lookups.
Reached target User and Group Name Lookups.
[   25.293465] systemd: Created slice system-serial\x2dgetty.slice.
Created slice system-serial\x2dgetty.slice.
[   25.294620] systemd: Reached target Slices.
Reached target Slices.
[   25.296188] systemd: Listening on Syslog Socket.
Listening on Syslog Socket.
[   25.300890] systemd: Starting Journal Service...
         Starting Journal Service...
[   25.307266] systemd: Starting Set the console keyboard layout...
         Starting Set the console keyboard layout...
[   25.309357] systemd: Listening on udev Kernel Socket.
Listening on udev Kernel Socket.
[   25.313126] systemd: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[   25.315525] systemd: Started Create Static Device Nodes in /dev.
Started Create Static Device Nodes in /dev.
[   25.321896] systemd: Started Load Kernel Modules.
Started Load Kernel Modules.
[   25.323892] systemd: Started Remount Root and Kernel File Systems.
Started Remount Root and Kernel File Systems.
[   25.328744] systemd: Starting Load/Save Random Seed...
         Starting Load/Save Random Seed...
[   25.340278] systemd: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[   25.343945] systemd: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[   25.347765] systemd: Mounting Kernel Configuration File System...
         Mounting Kernel Configuration File System...
[   25.351897] systemd: Starting udev Kernel Device Manager...
         Starting udev Kernel Device Manager...
[   25.357654] systemd: Mounted Kernel Debug File System.
Mounted Kernel Debug File System.
[   25.359745] systemd: Started Load/Save Random Seed.
Started Load/Save Random Seed.
[   25.360924] systemd: Mounted FUSE Control File System.
Mounted FUSE Control File System.
[   25.362020] systemd: Mounted Kernel Configuration File System.
Mounted Kernel Configuration File System.
Started Apply Kernel Variables.
Started udev Kernel Device Manager.
Started udev Coldplug all Devices.
Started Journal Service.
         Starting Flush Journal to Persistent Storage...
Started Set the console keyboard layout.
Reached target Local File Systems (Pre).
Reached target Local File Systems.
         Starting Set console font and keymap...
         Starting Tell Plymouth To Write Out Runtime Data...
Started Dispatch Password Requests to Console Directory Watch.
Reached target Local Encrypted Volumes.
Started Flush Journal to Persistent Storage.
         Starting Create Volatile Files and Directories...
Started Set console font and keymap.
Started Tell Plymouth To Write Out Runtime Data.
Started Create Volatile Files and Directories.
         Starting Network Name Resolution...
         Starting Update UTMP about System Boot/Shutdown...
         Starting Network Time Synchronization...
Started Update UTMP about System Boot/Shutdown.
Reached target Sound Card.
Created slice system-systemd\x2dbacklight.slice.
         Starting Load/Save Screen Backlight…ightness of backlight:backlight...
Started Load/Save Screen Backlight Brightness of backlight:backlight.
Started Network Name Resolution.
Reached target Host and Network Name Lookups.
Started Network Time Synchronization.
Reached target System Time Synchronized.
Reached target System Initialization.
Started Discard unused blocks once a week.
Reached target Paths.
Started Daily Cleanup of Temporary Directories.
Listening on D-Bus System Message Bus Socket.
         Starting Docker Socket for the API.
Started Daily apt download activities.
Started Daily apt upgrade and clean activities.
Reached target Timers.
Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Listening on Docker Socket for the API.
Reached target Sockets.
Reached target Basic System.
         Starting Adbd for linux...
         Starting Dispatcher daemon for systemd-networkd...
         Starting rkisp 3A engine...
         Starting Accounts Service...
Started Regular background program processing daemon.
         Starting Modem Manager...
Started D-Bus System Message Bus.
         Starting WPA supplicant...
         Starting Restore /etc/resolv.conf i…fore the ppp link was shut down...
Started Set the CPU Frequency Scaling governor.
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Disk Manager...
         Starting Network Manager...
         Starting Login Service...
         Starting Save/Restore Sound Card State...
         Starting System Logging Service...
         Starting LSB: automatic crash report generation...
Started Restore /etc/resolv.conf if…before the ppp link was shut down.
Started Save/Restore Sound Card State.
Found device /dev/ttyFIQ0.
Started System Logging Service.
Started Avahi mDNS/DNS-SD Stack.
         Starting Authorization Manager...
Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Started rkisp 3A engine.
Started WPA supplicant.
Started Login Service.
Started LSB: automatic crash report generation.
Started Authorization Manager.
Started Accounts Service.
Started Modem Manager.
         Starting Hostname Service...
Started Dispatcher daemon for systemd-networkd.
Started Hostname Service.
         Starting Network Manager Script Dispatcher Service...
Started Network Manager Script Dispatcher Service.
Started Disk Manager.
Started Adbd for linux.
Started Network Manager.
Reached target Network.
         Starting /etc/rc.local Compatibility...
         Starting Permit User Sessions...
         Starting OpenBSD Secure Shell server...
Started /etc/rc.local Compatibility.
Started Permit User Sessions.
         Starting Hold until boot process finishes up...
         Starting Light Display Manager...
Started Hold until boot process finishes up.
         Starting Set console scheme...
Started Serial Getty on ttyFIQ0.
Started Set console scheme.
Created slice system-getty.slice.
Started Getty on tty1.
Reached target Login Prompts.
Started OpenBSD Secure Shell server.
Reached target Multi-User System.
Started Light Display Manager.
Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
Started Update UTMP about System Runlevel Changes.

Ubuntu 18.04.4 LTS firefly ttyFIQ0

firefly login: root (automatic login)

Last login: Fri Apr 23 15:42:12 CST 2021 on ttyFIQ0
_____ _         __ _
|___(_)_ __ ___ / _| |_   _
| |_| | '__/ _ \ |_| | | | |
|_| | | | |__/_| | |_| |
|_|   |_|_|\___|_| |_|\__, |
                        |___/
Welcome to Ubuntu 18.04.4 LTS (GNU/Linux 4.4.179-ge8a4ccd64f8f-dirty aarch64)

* Documentation:http://wiki.t-firefly.com
* Management:   http://www.t-firefly.com

System information as of Fri Apr 23 15:42:12 CST 2021

System load:   0.42 0.10 0.03   Up time:       0 min
Memory usage:4 % of 1960MB    IP:            172.16.10.134
Usage of /:    5% of 60G

root@firefly:~# [   29.683646] rga: req argument is inval

hiction 发表于 2021-6-24 14:33:25

串口打印 好长

wx__EAxShN 发表于 2022-6-18 19:29:05

我换了emmc后直接到mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)就卡住了

wx__EAxShN 发表于 2022-6-18 19:34:33

wx__EAxShN 发表于 2022-6-18 19:29
我换了emmc后直接到mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 1000 ...

查到了,貌似是emmc的clock问题

wsd 发表于 2022-7-8 18:07:50

wx__EAxShN 发表于 2022-6-18 19:34
查到了,貌似是emmc的clock问题

能不能详细说下,降低时钟吗?遇到了同样的问题
页: [1]
查看完整版本: RK3399标准板Build IMG,更换emmc后无法进入Ubuntu