请问一下，烧写了最新的SDK编译出来的固件无法启动是什么原因
DDR Version 1.24 20191016In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg = 0x3AA17AA1, stride = 0xD
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 337
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 68505
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:0, name: uboot, start:0x4000, size:0x2000
GPT part:1, name: trust, start:0x6000, size:0x2000
GPT part:2, name: misc, start:0x8000, size:0x2000
GPT part:3, name: boot, start:0xa000, size:0x10000
GPT part:4, name: recovery, start:0x1a000, size:0x10000
GPT part:5, name: backup, start:0x2a000, size:0x10000
GPT part:6, name: oem, start:0x3a000, size:0x20000
GPT part:7, name: rootfs, start:0x5a000, size:0x180800
GPT part:8, name: userdata, start:0x1da800, size:0x1b447df
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xfac30
RunBL31 0x40000 @ 111124 us
NOTICE:BL31: v1.3(release):845ee93
NOTICE:BL31: Built : 15:51:11, Jul 22 2020
NOTICE:BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1196): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-266-gee81607c #1 Mon Aug 17 09:23:30 UTC 2020 aarch64)
INF TEE-CORE:init_primary_helper:338: Release version: 1.2
INF TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-gc56bc3a030 #meakboo (Aug 21 2021 - 09:23:01 +0800)
Model: Rockchip RK3399 Evaluation Board
PreSerial: 2
DRAM:3.8 GiB
Sysmem: init
Relocation Offset: f5bc9000, fdt: f3dbd358
Using default environment
dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
boot mode: recovery (misc)
Found DTB in recovery part
DTB: rk-kernel.dtb
HASH(c): OK
Android header version 0
I2c0 speed: 400000Hz
rk8xx_read: read reg 0xed failed, ret=-121
Model: Rockchip RK3399 EVB IND LPDDR4 Board edp (Linux)
Rockchip UBOOT DRM driver version: v1.0.1
Using display timing dts
Detailed mode clock 200000 kHz, flags
H: 1536 1548 1564 1612
V: 2048 2056 2060 2068
bus_format: 100e
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
AUX CH command reply failed!
AUX CH error happens: 2
failed to get Rx Max Link Rate
failed to init training
unable to do link train
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 816000 KHz
dpll 800000 KHz
cpll 24000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 200000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 133333 KHz
pclk_perilp1 50000 KHz
Net: eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):0
Card did not respond to voltage select!
mmc_init: -95, time 26
failed to read ca head from misc
Could not read from misc partition
WARNING: Unable to load the BCB.
ANDROID: reboot reason: "recovery"
ERR TEE-CORE:main_tee_entry_fast:229: optee api revision mismatch with u-boot/kernel, panic
PANIC: main_tee_entry_fast core/arch/arm/plat-rockchip/main.c:230
烧写流程肯定是没错的
编译的话，就直接运行的build.sh
还需要什么特殊的操作么 meakboo 发表于 2021-8-21 11:46
烧写流程肯定是没错的
编译的话，就直接运行的build.sh
还需要什么特殊的操作么
可以先确认sdk是否同步最新提交，再进行编译 本帖最后由 bufferman0823 于 2021-8-24 17:18 编辑
这是我刚编译后的启动log的你自己对比下不同:
DDR Version 1.24 20191016
In
soft reset
SRX
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg = 0x32817281, stride = 0x9
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 427
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 68973
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:0, name: uboot, start:0x4000, size:0x2000
GPT part:1, name: trust, start:0x6000, size:0x2000
GPT part:2, name: misc, start:0x8000, size:0x2000
GPT part:3, name: boot, start:0xa000, size:0x10000
GPT part:4, name: recovery, start:0x1a000, size:0x10000
GPT part:5, name: backup, start:0x2a000, size:0x10000
GPT part:6, name: rootfs, start:0x5a000, size:0x3c6000
GPT part:7, name: userdata, start:0x420000, size:0x18fefdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xd8cb8
RunBL31 0x40000 @ 111466 us
NOTICE:BL31: v1.3(release):845ee93
NOTICE:BL31: Built : 15:51:11, Jul 22 2020
NOTICE:BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1196): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-266-gee81607c #1 Mon Aug 17 09:23:30 UTC 2020 aarch64)
INF TEE-CORE:init_primary_helper:338: Release version: 1.2
INF TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-gc56bc3a030 #jmiao1 (Aug 16 2021 - 16:38:58 +0800)
Model: Firefly-RK3399 Board
PreSerial: 2
DRAM:2 GiB
Sysmem: init
Relocation Offset: 7dbeb000, fdt: 7bddf4d8
Using default environment
dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 150Mhz
PartType: EFI
boot mode: normal
Found DTB in boot part
DTB: rk-kernel.dtb
HASH(c): OK
Android header version 0
I2c0 speed: 400000Hz
PMIC:RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log 1100000 uV
In: serial
Out: serial
Err: serial
Model: Firefly-RK3399 Board (Linux Opensource)
Rockchip UBOOT DRM driver version: v1.0.1
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
Could not find baseparameter partition
mode:3840x2160
Detailed mode clock 594000 kHz, flags
H: 3840 4016 4104 4400
V: 2160 2168 2178 2250
bus_format: 100a
CEA mode used vic=97
final pixclk = 594000000 tmdsclk = 594000000
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
write offset 03 success
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
write offset 21 success
PHY powered down in 0 iterations
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
write offset 21 success
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
xfer: num: 2, addr: 0x54
xfer: num: 1, addr: 0x54
write offset 21 success
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=594.000MHz N=10240 cts=990000
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
aplll 816000 KHz
apllb 816000 KHz
dpll 800000 KHz
cpll 24000 KHz
gpll 800000 KHz
npll 600000 KHz
vpll 594000 KHz
aclk_perihp 133333 KHz
hclk_perihp 66666 KHz
pclk_perihp 33333 KHz
aclk_perilp0 266666 KHz
hclk_perilp0 88888 KHz
pclk_perilp0 44444 KHz
hclk_perilp1 100000 KHz
pclk_perilp1 50000 KHz
Net: eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):0
ANDROID: reboot reason: "(none)"
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...
Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 22407 KiB
RAM disk load addr 0x0a200000 size 8657 KiB
## Flattened Device Tree blob at 08300000
Booting using the fdt blob at 0x8300000
XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
'reserved-memory' ramoops@110000: addr=110000 size=f0000
Using Device Tree in place at 0000000008300000, end 000000000831c317
No file: logo_kernel.bmp
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0x80000000 (size: 0x75e00000)
Total: 3172.664 ms
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.194+ (jmiao1@pek-jmiao1-u16) (firefly: 021a2d9d5f486891ae334300b94bf05ef55e2b1b) (gcc version 6.3.1 20170404 (L1
[ 0.000000] Boot CPU: AArch64 Processor
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole enabled
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fee1000 s46312 r8192 d31512 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 507912
[ 0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normalandroidboot.slot_suffix= androidboo1
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] software IO TLB: mapped (0MB)
[ 0.000000] Memory: 1993232K/2064384K available (14014K kernel code, 1798K rwdata, 5320K rodata, 1216K init, 2010K bss, 71152K reserved, 0K c)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8009370000 - 0xffffff80094a0000 (1216 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008e30000 ( 14016 KB)
[ 0.000000] .rodata : 0xffffff8008e30000 - 0xffffff8009370000 (5376 KB)
[ 0.000000] .data : 0xffffff80094a0000 - 0xffffff8009661808 (1799 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 (4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory: 0xffffffc000200000 - 0xffffffc080000000 (2046 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000]Build-time adjustment of leaf fanout to 64.
[ 0.000000]RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @7d480000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000007d410000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000007d420000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[ 0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.002189] Console: colour dummy device 80x25
[ 0.002629] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.003614] pid_max: default: 32768 minimum: 301
[ 0.004132] Security Framework initialized
[ 0.004592] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.005232] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.006572] Initializing cgroup subsys io
[ 0.006979] Initializing cgroup subsys memory
[ 0.007418] Initializing cgroup subsys devices
[ 0.007848] Initializing cgroup subsys freezer
[ 0.008287] Initializing cgroup subsys perf_event
[ 0.008741] Initializing cgroup subsys net_prio
[ 0.009178] Initializing cgroup subsys pids
[ 0.009608] ftrace: allocating 50687 entries in 198 pages
[ 0.131375] sched-energy: Sched-energy-costs installed from DT
[ 0.131939] CPU0: update cpu_capacity 401
[ 0.132381] ASID allocator initialised with 32768 entries
[ 0.136027] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.137367] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.139568] Detected VIPT I-cache on CPU1
[ 0.139597] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.139621] CPU1: using LPI pending table @0x000000007d6c0000
[ 0.139659] CPU1: update cpu_capacity 401
[ 0.139663] CPU1: Booted secondary processor
[ 0.140198] Detected VIPT I-cache on CPU2
[ 0.140218] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.140240] CPU2: using LPI pending table @0x000000007d6f0000
[ 0.140265] CPU2: update cpu_capacity 401
[ 0.140269] CPU2: Booted secondary processor
[ 0.140797] Detected VIPT I-cache on CPU3
[ 0.140817] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.140840] CPU3: using LPI pending table @0x000000007d740000
[ 0.140865] CPU3: update cpu_capacity 401
[ 0.140868] CPU3: Booted secondary processor
[ 0.141407] Detected PIPT I-cache on CPU4
[ 0.141431] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.141464] CPU4: using LPI pending table @0x000000007d770000
[ 0.141499] CPU4: update cpu_capacity 1024
[ 0.141502] CPU4: Booted secondary processor
[ 0.142040] Detected PIPT I-cache on CPU5
[ 0.142059] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.142090] CPU5: using LPI pending table @0x000000007d7b0000
[ 0.142115] CPU5: update cpu_capacity 1024
[ 0.142118] CPU5: Booted secondary processor
[ 0.142200] Brought up 6 CPUs
[ 0.154537] SMP: Total of 6 processors activated.
[ 0.154987] CPU features: detected feature: GIC system register CPU interface
[ 0.155674] CPU features: detected feature: 32-bit EL0 Support
[ 0.156232] CPU: All CPU(s) started at EL2
[ 0.156657] alternatives: patching kernel code
[ 0.158421] devtmpfs: initialized
[ 0.176769] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.177720] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.178740] xor: measuring software checksum speed
[ 0.188390] 8regs :2856.000 MB/sec
[ 0.198445] 8regs_prefetch:2556.000 MB/sec
[ 0.208496] 32regs :3204.000 MB/sec
[ 0.218551] 32regs_prefetch:2848.000 MB/sec
[ 0.218998] xor: using function: 32regs (3204.000 MB/sec)
[ 0.219530] pinctrl core: initialized pinctrl subsystem
[ 0.221715] Failed to find legacy iommu devices
[ 0.222502] NET: Registered protocol family 16
[ 0.228153] cpuidle: using governor ladder
[ 0.232161] cpuidle: using governor menu
[ 0.232554] Registered FIQ tty driver
[ 0.233445] vdso: 2 pages (1 code @ ffffff8008e36000, 1 data @ ffffff80094a4000)
[ 0.234179] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.235236] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.259553] console enabled
[ 0.259914] pstore: Registered ramoops as persistent store backend
[ 0.260511] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.263574] console enabled
[ 0.263574] console enabled
[ 0.264251] bootconsole disabled
[ 0.264251] bootconsole disabled
[ 0.265181] Registered fiq debugger ttyFIQ0
[ 0.315171] raid6: int64x1gen() 468 MB/s
[ 0.332232] raid6: int64x1xor() 414 MB/s
[ 0.349323] raid6: int64x2gen() 675 MB/s
[ 0.366376] raid6: int64x2xor() 605 MB/s
[ 0.383494] raid6: int64x4gen() 972 MB/s
[ 0.400540] raid6: int64x4xor() 675 MB/s
[ 0.417692] raid6: int64x8gen() 781 MB/s
[ 0.434715] raid6: int64x8xor() 630 MB/s
[ 0.451798] raid6: neonx1 gen() 960 MB/s
[ 0.468926] raid6: neonx1 xor() 675 MB/s
[ 0.486000] raid6: neonx2 gen()1273 MB/s
[ 0.503082] raid6: neonx2 xor() 970 MB/s
[ 0.520165] raid6: neonx4 gen()1726 MB/s
[ 0.537254] raid6: neonx4 xor()1175 MB/s
[ 0.554366] raid6: neonx8 gen()1695 MB/s
[ 0.571448] raid6: neonx8 xor()1236 MB/s
[ 0.571838] raid6: using algorithm neonx4 gen() 1726 MB/s
[ 0.572314] raid6: .... xor() 1175 MB/s, rmw enabled
[ 0.572755] raid6: using intx1 recovery algorithm
[ 0.578010] iommu: Adding device ff650000.vpu_service to group 0
[ 0.578634] iommu: Adding device ff660000.rkvdec to group 1
[ 0.579240] iommu: Adding device ff8f0000.vop to group 2
[ 0.579810] iommu: Adding device ff900000.vop to group 3
[ 0.580376] iommu: Adding device ff910000.rkisp1 to group 4
[ 0.580970] iommu: Adding device ff920000.rkisp1 to group 5
[ 0.581944] rk_iommu ff650800.iommu: can't get sclk
[ 0.582620] rk_iommu ff660480.iommu: can't get sclk
[ 0.583267] rk_iommu ff8f3f00.iommu: can't get sclk
[ 0.583856] rk_iommu ff903f00.iommu: can't get sclk
[ 0.584459] rk_iommu ff914000.iommu: can't get sclk
[ 0.585047] rk_iommu ff924000.iommu: can't get sclk
[ 0.585845] SCSI subsystem initialized
[ 0.586535] usbcore: registered new interface driver usbfs
[ 0.587060] usbcore: registered new interface driver hub
[ 0.587625] usbcore: registered new device driver usb
[ 0.588141] media: Linux media interface: v0.10
[ 0.588589] Linux video capture interface: v2.00
[ 0.589075] pps_core: LinuxPPS API ver. 1 registered
[ 0.589517] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.590343] PTP clock support registered
[ 0.591842] Advanced Linux Sound Architecture Driver Initialized.
[ 0.592840] Bluetooth: Core ver 2.21
[ 0.593190] NET: Registered protocol family 31
[ 0.593597] Bluetooth: HCI device and connection manager initialized
[ 0.594170] Bluetooth: HCI socket layer initialized
[ 0.594611] Bluetooth: L2CAP socket layer initialized
[ 0.595085] Bluetooth: SCO socket layer initialized
[ 0.596023] nfc: nfc_init: NFC Core ver 0.1
[ 0.596430] NET: Registered protocol family 39
[ 0.596941] rockchip-cpuinfo cpuinfo: Serial : 8872ea202ee31427
[ 0.598283] clocksource: Switched to clocksource arch_sys_counter
[ 0.648885] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.649795] NET: Registered protocol family 2
[ 0.650593] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.651374] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.652418] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.653063] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.653686] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.654516] NET: Registered protocol family 1
[ 0.655173] RPC: Registered named UNIX socket transport module.
[ 0.655712] RPC: Registered udp transport module.
[ 0.656132] RPC: Registered tcp transport module.
[ 0.656558] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.657799] Trying to unpack rootfs image as initramfs...
[ 1.070534] Freeing initrd memory: 8656K
[ 1.071599] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 1.072422] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.075963] audit: initializing netlink subsys (disabled)
[ 1.076489] audit: type=2000 audit(0.988:1): initialized
[ 1.077382] Initialise system trusted keyring
[ 1.085647] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.086957] NFS: Registering the id_resolver key type
[ 1.087443] Key type id_resolver registered
[ 1.087818] Key type id_legacy registered
[ 1.088193] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 1.089488] ntfs: driver 2.1.32 .
[ 1.090247] fuse init (API version 7.23)
[ 1.090947] SGI XFS with security attributes, no debug enabled
[ 1.096874] NET: Registered protocol family 38
[ 1.097304] Key type asymmetric registered
[ 1.097671] Asymmetric key parser 'x509' registered
[ 1.098248] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 1.099041] io scheduler noop registered
[ 1.099412] io scheduler deadline registered
[ 1.099828] io scheduler cfq registered (default)
[ 1.101764] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
[ 1.106892] ace test_init function.
[ 1.107393] ace test_init end.ret=0
[ 1.108080] radar end.ret=0
[ 1.110831] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 1.111440] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 1.112034] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 1.112602] rockchip-pcie f8000000.pcie: missing "memory-region" property
[ 1.113211] PCI host bridge /pcie@f8000000 ranges:
[ 1.113768] MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[ 1.114226] IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[ 1.656339] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 1.656952] rockchip-pcie f8000000.pcie: deferred probe failed
[ 1.657692] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 1.659230] Module initialized.
[ 1.659990] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 1.660852] rk-vcodec ff650000.vpu_service: probe device
[ 1.661587] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[ 1.662746] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 1.663380] rk-vcodec ff650000.vpu_service: init success
[ 1.664090] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 1.665033] rk-vcodec ff660000.rkvdec: probe device
[ 1.665679] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[ 1.666632] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 1.667214] rk-vcodec ff660000.rkvdec: init success
[ 1.669107] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.669796] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 1.672031] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 1.672717] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 1.674554] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[ 1.675759] pwm-regulator: supplied by vcc5v0_sys
[ 1.676859] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 1.678006] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[ 1.679328] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 38, base_baud = 1500000) is a 16550A
[ 1.681843] Initialized drm 1.1.0 20060810
[ 1.686238] Rockchip DRM driver version: v1.0.1
[ 1.688911] mali ff9a0000.gpu: Failed to get regulator
[ 1.689379] mali ff9a0000.gpu: Power control initialization failed
[ 1.690271] Unable to detect cache hierarchy for CPU 0
[ 1.691572] brd: module loaded
[ 1.697085] loop: module loaded
[ 1.697916] zram: Added device: zram0
[ 1.698533] lkdtm: No crash points registered, enable through debugfs
[ 1.699481] Loading dl1825 driver
[ 1.701396] register spi return v = :0
[ 1.702228] tun: Universal TUN/TAP device driver, 1.6
[ 1.702697] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 1.704216] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[ 1.704937] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 1.705576] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 1.706079] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
[ 1.706601] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 1.707320] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 1.707935] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 1.713494] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 1.714104] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 1.714565]Ring mode enabled
[ 1.714847]DMA HW capability register supported
[ 1.715252]Normal descriptors
[ 1.715565]RX Checksum Offload Engine supported (type 2)
[ 1.716051]Wake-Up On Lan supported
[ 1.716419]Enable RX Mitigation via HW Watchdog Timer
[ 1.786373] libphy: stmmac: probed
[ 1.786686] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 1.787255] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 1.789125] usbcore: registered new interface driver rtl8192cu
[ 1.789712] usbcore: registered new interface driver rndis_wlan
[ 1.790558] usbcore: registered new interface driver mt7601u
[ 1.791175] Rockchip WiFi SYS interface (V1.00) ...
[ 1.791726] usbcore: registered new interface driver rtl8150
[ 1.792297] usbcore: registered new interface driver r8152
[ 1.792845] usbcore: registered new interface driver asix
[ 1.793380] usbcore: registered new interface driver ax88179_178a
[ 1.793968] usbcore: registered new interface driver cdc_ether
[ 1.794584] usbcore: registered new interface driver rndis_host
[ 1.795177] usbcore: registered new interface driver cdc_ncm
[ 1.795729] usbcore: registered new interface driver qmi_wwan
[ 1.796288] usbcore: registered new interface driver cdc_mbim
[ 1.798205] rockchip-dwc3 usb0: failed to get drvdata dwc3
[ 1.802768] rockchip-dwc3 usb1: fail to get drvdata hcd
[ 1.804499] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.805090] ehci-pci: EHCI PCI platform driver
[ 1.805552] ehci-platform: EHCI generic platform driver
[ 1.809863] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.810557] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[ 1.811362] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[ 1.817306] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.817998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.818617] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.819255] usb usb1: Product: EHCI Host Controller
[ 1.819696] usb usb1: Manufacturer: Linux 4.4.194+ ehci_hcd
[ 1.820196] usb usb1: SerialNumber: fe3c0000.usb
[ 1.821069] hub 1-0:1.0: USB hub found
[ 1.821448] hub 1-0:1.0: 1 port detected
[ 1.822366] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.822924] ohci-platform: OHCI generic platform driver
[ 1.823870] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 1.824649] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[ 1.825436] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[ 1.880516] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.881126] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.881779] usb usb2: Product: Generic Platform OHCI controller
[ 1.882316] usb usb2: Manufacturer: Linux 4.4.194+ ohci_hcd
[ 1.882817] usb usb2: SerialNumber: fe3e0000.usb
[ 1.883884] hub 2-0:1.0: USB hub found
[ 1.884257] hub 2-0:1.0: 1 port detected
[ 1.886024] usbcore: registered new interface driver cdc_acm
[ 1.886539] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.887309] usbcore: registered new interface driver cdc_wdm
[ 1.887861] usbcore: registered new interface driver uas
[ 1.888462] usbcore: registered new interface driver usb-storage
[ 1.889093] usbcore: registered new interface driver usbserial
[ 1.889672] usbcore: registered new interface driver usbserial_generic
[ 1.890296] usbserial: USB Serial support registered for generic
[ 1.890876] usbcore: registered new interface driver ch341
[ 1.891412] usbserial: USB Serial support registered for ch341-uart
[ 1.892014] usbcore: registered new interface driver cp210x
[ 1.892562] usbserial: USB Serial support registered for cp210x
[ 1.893155] usbcore: registered new interface driver ftdi_sio
[ 1.893709] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.894520] usbcore: registered new interface driver keyspan
[ 1.895049] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 1.895787] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 1.896476] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 1.897152] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 1.897870] usbcore: registered new interface driver option
[ 1.898415] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.899219] usbcore: registered new interface driver oti6858
[ 1.899762] usbserial: USB Serial support registered for oti6858
[ 1.900359] usbcore: registered new interface driver pl2303
[ 1.900886] usbserial: USB Serial support registered for pl2303
[ 1.901477] usbcore: registered new interface driver qcserial
[ 1.902022] usbserial: USB Serial support registered for Qualcomm USB modem
[ 1.902711] usbcore: registered new interface driver sierra
[ 1.903240] usbserial: USB Serial support registered for Sierra USB modem
[ 1.905321] usbcore: registered new interface driver usbtouchscreen
[ 1.906333] .. rk pwm remotectl v1.1 init
[ 1.907014] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[ 1.908195] sensor_register_slave:mma8452,id=17
[ 1.908632] sensor_register_slave:lis3dh,id=7
[ 1.909035] sensor_register_slave:mma7660,id=18
[ 1.909461] sensor_register_slave:lsm303d,id=22
[ 1.909875] sensor_register_slave:gs_mc3230,id=23
[ 1.910304] gsensor_init
[ 1.910639] sensor_register_slave:mpu6880_acc,id=24
[ 1.911076] sensor_register_slave:mpu6500_acc,id=25
[ 1.911524] sensor_register_slave:lsm330_acc,id=26
[ 1.911961] sensor_register_slave:akm8975,id=30
[ 1.912385] sensor_register_slave:akm8963,id=31
[ 1.912799] sensor_register_slave:l3g4200d,id=45
[ 1.913213] sensor_register_slave:l3g20d,id=46
[ 1.913626] sensor_register_slave:ewtsa,id=47
[ 1.914019] sensor_register_slave:lsm330_gyro,id=51
[ 1.914476] sensor_register_slave:cm3217,id=53
[ 1.914879] sensor_register_slave:cm3218,id=54
[ 1.915879] i2c /dev entries driver
[ 1.917880] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[ 1.918616] fan53555-reg: supplied by vcc5v0_sys
[ 1.921452] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[ 1.922141] fan53555-reg: supplied by vcc5v0_sys
[ 1.925085] rk808 0-001b: Pmic Chip id: 0x0
[ 1.928516] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.929137] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.929833] DCDC_REG1: supplied by vcc3v3_sys
[ 1.931133] DCDC_REG2: supplied by vcc3v3_sys
[ 1.932236] DCDC_REG3: supplied by vcc3v3_sys
[ 1.933020] DCDC_REG4: supplied by vcc3v3_sys
[ 1.934012] LDO_REG1: supplied by vcc3v3_sys
[ 1.935679] LDO_REG2: supplied by vcc3v3_sys
[ 1.937179] LDO_REG3: supplied by vcc3v3_sys
[ 1.938712] LDO_REG4: supplied by vcc3v3_sys
[ 1.940243] LDO_REG5: supplied by vcc3v3_sys
[ 1.941752] LDO_REG6: supplied by vcc3v3_sys
[ 1.943294] LDO_REG7: supplied by vcc3v3_sys
[ 1.944817] LDO_REG8: supplied by vcc3v3_sys
[ 1.946351] SWITCH_REG1: supplied by vcc3v3_sys
[ 1.947171] SWITCH_REG2: supplied by vcc3v3_sys
[ 1.951363] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 1.952568] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009af2000
[ 1.954388] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009af4000
[ 1.956749] fusb302 4-0022: Can't get property of role, set role to default DRP
[ 1.966729] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
[ 1.967735] input: Typec_Headphone as /devices/platform/ff3d0000.i2c/i2c-4/4-0022/input/input1
[ 1.968763] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009af6000
[ 1.971174] IR NEC protocol handler initialized
[ 1.972709] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[ 1.973312] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[ 1.976632] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
[ 1.977241] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[ 1.980002] usbcore: registered new interface driver npu_acm
[ 1.980659] usbcore: registered new interface driver uvcvideo
[ 1.981176] USB Video Class driver (1.1.1)
[ 1.984674] Boot mode: normal
[ 1.987167] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 1.988201] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[ 1.990391] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 1.991424] rtk_btusb: Realtek Bluetooth USB driver ver 3.1.a2fd257.20190430-133301
[ 1.992107] rtk_btcoex: rtk_btcoex_init: version: 1.2
[ 1.992577] rtk_btcoex: create workqueue
[ 1.992927] rtk_btcoex: Coex over UDP
[ 1.993576] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[ 1.994190] usbcore: registered new interface driver rtk_btusb
[ 1.994745] Bluetooth: Virtual HCI driver ver 1.5
[ 1.995307] Bluetooth: HCI UART driver ver 2.3
[ 1.995706] Bluetooth: HCI UART protocol H4 registered
[ 1.996160] Bluetooth: HCI UART protocol LL registered
[ 1.996631] Bluetooth: HCI UART protocol ATH3K registered
[ 1.997174] usbcore: registered new interface driver bfusb
[ 1.997746] usbcore: registered new interface driver btusb
[ 1.998912] cpu cpu0: bin=1
[ 1.999239] cpu cpu0: leakage=14
[ 2.012168] cpu cpu0: temp=53888, pvtm=136706 (135914 + 792)
[ 2.013062] cpu cpu0: pvtm-volt-sel=0
[ 2.013483] cpu cpu0: bin-scale=34
[ 2.014203] cpu cpu4: bin=1
[ 2.014602] cpu cpu4: leakage=24
[ 2.027380] cpu cpu4: temp=52777, pvtm=142864 (142479 + 385)
[ 2.028779] cpu cpu4: pvtm-volt-sel=0
[ 2.029172] cpu cpu4: bin-scale=17
[ 2.031119] cpu cpu0: avs=0
[ 2.031534] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 2.032985] cpu cpu0: failed to find power_model node
[ 2.034827] cpu cpu4: avs=0
[ 2.035226] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 2.037451] cpu cpu4: failed to find power_model node
[ 2.039037] sdhci: Secure Digital Host Controller Interface driver
[ 2.039612] sdhci: Copyright(c) Pierre Ossman
[ 2.040015] Synopsys Designware Multimedia Card Interface Driver
[ 2.041824] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 2.042504] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 2.043116] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 2.043687] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 2.044577] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 2.045416] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 2.045963] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 2.047971] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 2.048653] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 2.049263] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 2.049833] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[ 2.050718] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 2.052083] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[ 2.052793] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[ 2.066038] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 2.079635] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 2.080747] sdhci-pltfm: SDHCI platform and OF driver helper
[ 2.083243] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 2.083797] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 2.114814] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[ 2.117023] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.118112] usbcore: registered new interface driver usbhid
[ 2.118635] usbhid: USB HID core driver
[ 2.119110] inv_mpu_iio: inv_mpu_init:746
[ 2.123126] usbcore: registered new interface driver snd-usb-audio
[ 2.123322] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 2.125765] rt5640 1-001c: rt5640 have no aux_det_adc_value defined
[ 2.126411] rt5640 1-001c: Can not read property hp_det_gpio
[ 2.126912] rt5640 1-001c: Can not read property: linein-mute.
[ 2.142969] rockchip-cdndp-sound dp-sound: ASoC: CODEC DAI spdif-hifi not registered
[ 2.143673] rockchip-cdndp-sound dp-sound: rockchip_sound_probe snd_soc_register_card fail -517
[ 2.144569] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.145557] IPVS: Registered protocols (TCP, UDP)
[ 2.146015] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 2.146774] IPVS: Creating netns size=2104 id=0
[ 2.147205] IPVS: ipvs loaded.
[ 2.147504] IPVS: scheduler registered.
[ 2.148166] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.148733] Initializing XFRM netlink socket
[ 2.149754] NET: Registered protocol family 10
[ 2.151061] NET: Registered protocol family 17
[ 2.151507] NET: Registered protocol family 15
[ 2.151936] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 2.153076] Bridge firewalling registered
[ 2.153896] Bluetooth: RFCOMM socket layer initialized
[ 2.154403] Bluetooth: RFCOMM ver 1.11
[ 2.154764] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.155305] Bluetooth: HIDP socket layer initialized
[ 2.155810] : Enter rfkill_wlan_init
[ 2.156546] : Enter rfkill_wlan_probe
[ 2.157015] : wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[ 2.157639] : wlan_platdata_parse_dt: enable wifi power control.
[ 2.158264] : wlan_platdata_parse_dt: wifi power controled by gpio.
[ 2.158990] : wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[ 2.159802] : wlan_platdata_parse_dt: The ref_wifi_clk not found !
[ 2.160459] : rfkill_wlan_probe: init gpio
[ 2.160926] : Exit rfkill_wlan_probe
[ 2.161404] : Enter rfkill_rk_init
[ 2.162155] : bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[ 2.162923] : bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[ 2.163653] : bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[ 2.164387] : bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[ 2.165585] : Request irq for bt wakeup host
[ 2.166164] : ** disable irq
[ 2.166890] : bt_default device registered.
[ 2.167534] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 2.167556] Key type dns_resolver registered
[ 2.167867] sensor_register_slave:mpu6880_gyro,id=50
[ 2.168776] ov13850 1-0036: driver version: 00.01.03
[ 2.171485] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[ 2.172722] ov13850 1-0036: write SCCB_ID failed
[ 2.172937] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[ 2.173900] ov13850: probe of 1-0036 failed with error -5
[ 2.174019] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[ 2.175028] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[ 2.175486] ov13850 1-0046: driver version: 00.01.03
[ 2.178189] ov13850 1-0046: write SCCB_ID failed
[ 2.178821] ov13850: probe of 1-0046 failed with error -5
[ 2.180485] Registered cp15_barrier emulation handler
[ 2.180629]mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8
[ 2.181437] Registered setend emulation handler
[ 2.182951] Loading compiled-in X.509 certificates
[ 2.186771] Btrfs loaded
[ 2.188263] rga2: Driver loaded successfully ver:3.02
[ 2.189090] rga2: Module initialized.
[ 2.191687] phy phy-ff770000.syscon:usb2-phy@e450.7: Failed to get VBUS supply regulator
[ 2.197415] rockchip-drm display-subsystem: dmc is disabled
[ 2.198829] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 2.200381] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008ef40f0)
[ 2.201320] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 2.202033] fusb302 4-0022: CC connected in CC1 as UFP
[ 2.203015] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008ef40f0)
[ 2.205152] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 2.205867] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 2.206866] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 2.211483] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008ee8948)
[ 2.213584] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
[ 2.215241] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008ee9978)
[ 2.216096] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.216722] No driver support for vblank timestamp query.
[ 2.238783] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[ 2.239416] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 2.240054] usb 1-1: Product: USB 2.0 Hub
[ 2.241420] hub 1-1:1.0: USB hub found
[ 2.242029] hub 1-1:1.0: 7 ports detected
[ 2.526532] usb 1-1.2: new low-speed USB device number 3 using ehci-platform
[ 2.633765] usb 1-1.2: New USB device found, idVendor=413c, idProduct=2105
[ 2.634441] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.635097] usb 1-1.2: Product: Dell USB Keyboard
[ 2.635559] usb 1-1.2: Manufacturer: Dell
[ 2.656670] input: Dell Dell USB Keyboard as /devices/platform/fe3c0000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2105.0001/input/input2
[ 2.672532] vendor storage:20190527 ret = 0
[ 2.710675] hid-generic 0003:413C:2105.0001: input,hidraw0: USB HID v1.10 Keyboard on usb-fe3c0000.usb-1.2/input0
[ 2.765995] Freeing drm_logo memory: 616K
[ 2.913617] Console: switching to colour frame buffer device 480x135
[ 3.032946] rockchip-drm display-subsystem: fb0:frame buffer device
[ 3.040027] mali ff9a0000.gpu: leakage=17
[ 3.052598] mali ff9a0000.gpu: temp=52777, pvtm=116399 (116267 + 132)
[ 3.053907] mali ff9a0000.gpu: pvtm-volt-sel=0
[ 3.054700] mali ff9a0000.gpu: avs=0
[ 3.055625] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 3.056416] mali ff9a0000.gpu: Protected mode not available
[ 3.057390] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0
[ 3.058073] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 3.059174] I : : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; : 423; : kbase_devfreq_init(); success initi.
[ 3.061277] mali ff9a0000.gpu: Probed as mali0
[ 3.067566] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[ 3.068439] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 3
[ 3.069247] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[ 3.070070] xhci-hcd xhci-hcd.10.auto: irq 229, io mem 0xfe800000
[ 3.070795] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.071401] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.072040] usb usb3: Product: xHCI Host Controller
[ 3.072485] usb usb3: Manufacturer: Linux 4.4.194+ xhci-hcd
[ 3.072978] usb usb3: SerialNumber: xhci-hcd.10.auto
[ 3.074005] hub 3-0:1.0: USB hub found
[ 3.074418] hub 3-0:1.0: 1 port detected
[ 3.074994] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[ 3.075714] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 4
[ 3.076456] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.077233] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.077870] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.078526] usb usb4: Product: xHCI Host Controller
[ 3.078998] usb usb4: Manufacturer: Linux 4.4.194+ xhci-hcd
[ 3.079509] usb usb4: SerialNumber: xhci-hcd.10.auto
[ 3.080453] hub 4-0:1.0: USB hub found
[ 3.080806] hub 4-0:1.0: 1 port detected
[ 3.082414] xhci-hcd xhci-hcd.10.auto: remove, state 1
[ 3.082925] usb usb4: USB disconnect, device number 1
[ 3.086863] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 3.100342] xhci-hcd xhci-hcd.10.auto: Host not halted after 16000 microseconds.
[ 3.101009] xhci-hcd xhci-hcd.10.auto: Host controller not halted, aborting reset.
[ 3.101788] xhci-hcd xhci-hcd.10.auto: USB bus 4 deregistered
[ 3.102683] xhci-hcd xhci-hcd.10.auto: remove, state 1
[ 3.102688] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 5
[ 3.102818] xhci-hcd xhci-hcd.11.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[ 3.102856] xhci-hcd xhci-hcd.11.auto: irq 230, io mem 0xfe900000
[ 3.103058] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.103062] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.103066] usb usb5: Product: xHCI Host Controller
[ 3.103070] usb usb5: Manufacturer: Linux 4.4.194+ xhci-hcd
[ 3.103073] usb usb5: SerialNumber: xhci-hcd.11.auto
[ 3.108207] hub 5-0:1.0: USB hub found
[ 3.108615] hub 5-0:1.0: 1 port detected
[ 3.109212] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 3.109835] usb usb3: USB disconnect, device number 1
[ 3.110580] xhci-hcd xhci-hcd.11.auto: new USB bus registered, assigned bus number 4
[ 3.111527] xhci-hcd xhci-hcd.10.auto: USB bus 3 deregistered
[ 3.112147] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 3.113048] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 3.113655] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.114302] usb usb4: Product: xHCI Host Controller
[ 3.114739] usb usb4: Manufacturer: Linux 4.4.194+ xhci-hcd
[ 3.115233] usb usb4: SerialNumber: xhci-hcd.11.auto
[ 3.116133] hub 4-0:1.0: USB hub found
[ 3.116504] hub 4-0:1.0: 1 port detected
[ 3.121189] ehci-platform fe380000.usb: EHCI Host Controller
[ 3.122079] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 3
[ 3.122878] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[ 3.129537] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 3.130362] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.130960] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.131609] usb usb3: Product: EHCI Host Controller
[ 3.132047] usb usb3: Manufacturer: Linux 4.4.194+ ehci_hcd
[ 3.132548] usb usb3: SerialNumber: fe380000.usb
[ 3.133739] hub 3-0:1.0: USB hub found
[ 3.134094] hub 3-0:1.0: 1 port detected
[ 3.135240] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 3.136148] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[ 3.136941] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[ 3.192713] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.193338] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.193974] usb usb6: Product: Generic Platform OHCI controller
[ 3.194516] usb usb6: Manufacturer: Linux 4.4.194+ ohci_hcd
[ 3.195013] usb usb6: SerialNumber: fe3a0000.usb
[ 3.196619] hub 6-0:1.0: USB hub found
[ 3.197001] hub 6-0:1.0: 1 port detected
[ 3.198868] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 3.199552] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 3.200159] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 3.200707] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 3.201588] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 3.202407] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 3.202961] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 3.203911] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 3.217473] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.231046] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[ 3.233012] asoc-simple-card hdmi-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 3.248636] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[ 3.254617] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input3
[ 3.257537] rockchip-cdndp-sound dp-sound: spdif-hifi <-> ff870000.spdif mapping ok
[ 3.258272] hdmi-audio-codec hdmi-audio-codec.9.auto: ASoC: Failed to create Playback debugfs file
[ 3.260513] input: rockchip-cdndp-sound DP Jack as /devices/platform/dp-sound/sound/card2/input4
[ 3.263047]
[ 3.263197] =======================================================
[ 3.263790] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 3.264370] =======================================================
[ 3.264931] Realtek 8723DU USB WiFi driver (Powered by Rockchip) init.
[ 3.265534] : rockchip_wifi_power: 1
[ 3.265968] : wifi turn on power. -1
[ 3.266415] RTW: module init start
[ 3.266728] RTW: rtl8723du v5.6.5.1_34252.20190703_COEX20181130-2e2e
[ 3.267318] RTW: build time: Aug 15 2021 13:04:32
[ 3.267749] RTW: rtl8723du BT-Coex version = COEX20181130-2e2e
[ 3.268510] usbcore: registered new interface driver rtl8723du
[ 3.269038] RTW: module init ret=0
[ 3.270647] input: gpio-keys as /devices/platform/gpio-keys/input/input5
[ 3.271748] ==gsl_ts_init==
[ 3.272108] ret=0
[ 3.272604] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.10 (r)
[ 3.273265] ======== dhd_wlan_init_plat_data ========
[ 3.273745] : rockchip_wifi_get_oob_irq: Enter
[ 3.274255] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=70, oob_irq_flags=0x414
[ 3.274939] dhd_wlan_init_gpio: WL_REG_ON=-1
[ 3.275364] dhd_wifi_platform_load: Enter
[ 3.275790] Power-up adapter 'DHD generic adapter'
[ 3.276257] wifi_platform_set_power = 1
[ 3.276618] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 3.277077] : rockchip_wifi_power: 1
[ 3.277511] : wifi turn on power. -1
[ 3.289983] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.292201] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.294401] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.294564] phy phy-ff770000.syscon:usb2-phy@e450.7: charger = USB_CDP_CHARGER
[ 3.298330] rockchip-dwc3 usb0: USB peripheral connected
[ 3.298868] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.303331] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[ 3.359554] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[ 3.378680] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 10:35:47 UTC (1358505347)
[ 3.396834] vcc_sd: disabling
[ 3.397113] vcc_mipi: disabling
[ 3.397412] dvdd_1v2: disabling
[ 3.401379] ret 1024
[ 3.402805] I : : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; : 417; : mali_module_init(); svn_rev_string_fr.
[ 3.405621] Mali: Mali device driver loaded
[ 3.406624] rkisp1 ff910000.rkisp1: clear unready subdev num: 1
[ 3.408411] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 3.408974] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 3.409575] rkisp1: update sensor failed
[ 3.409949] rkisp1 ff920000.rkisp1: clear unready subdev num: 1
[ 3.411536] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 3.412098] rockchip-mipi-dphy-rx: No link between dphy and sensor
[ 3.412690] rkisp1: update sensor failed
[ 3.414311] ALSA device list:
[ 3.414597] #0: rockchip,hdmi
[ 3.414890] #1: rockchip,rt5640-codec
[ 3.415240] #2: rockchip-cdndp-sound
[ 3.416875] Freeing unused kernel memory: 1216K
Loading, please wait...
/dev/console is Ok
starting version 237
[ 3.499646] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 212
[ 3.507007] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[ 3.507571] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[ 3.578323] wifi_platform_bus_enumerate device present 1
[ 3.578804] ======== Card detection to detect SDIO card! ========
[ 3.579403] mmc2:mmc host rescan start!
[ 3.595352] bcmsdh_register: register client driver
[ 3.596073] bcmsdh_sdmmc_probe: Enter num=1
[ 3.596738] bcmsdh_sdmmc_probe: Enter num=2
[ 3.597129] bus num (host idx)=2, slot num (rca)=1
[ 3.597601] found adapter info 'DHD generic adapter'
[ 3.598118] sdioh_attach: set sd_f2_blocksize 256
[ 3.598620] sdioh_attach: sd clock rate = 0
[ 3.599349] dhdsdio_probe : no mutex held. set lock
[ 3.599923] F1 signature read @0x18000000=0x17224356
[ 3.605593] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[ 3.607060] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[ 3.607829] dhd_conf_set_chiprev: chip=0x4354, chiprev=2
[ 3.608687] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
[ 3.610593] CFG80211-ERROR) wl_init_prof : wl_init_prof: No profile
[ 3.612368] wl_escan_attach: Enter
[ 3.612736] wl_escan_init: Enter
[ 3.613249] wl_create_event_handler(): thread:wl_escan_handler:d7 started
[ 3.613266] tsk Enter, tsk = 0xffffffc0783101b0
[ 3.614623] dhd_attach(): thread:dhd_watchdog_thread:d8 started
[ 3.615381] dhd_attach(): thread:dhd_dpc:d9 started
[ 3.615995] dhd_attach(): thread:dhd_rxf:da started
[ 3.616524] dhd_deferred_work_init: work queue initialized
[ 3.617027] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[ 3.617673] dhd_bus_set_default_min_res_mask: Unhandled chip id
[ 3.618423] sdioh_cis_read: func_cis_ptr=0x10ac
[ 3.628144] Dongle Host Driver, version 1.579.77.41.10 (r)
[ 3.629767] wl_ext_iapsta_attach_netdev: ifidx=0, bssidx=0
[ 3.630269] Register interface MAC: d4:12:43:c2:f3:e0
[ 3.630269]
[ 3.631043] dhd_tcpack_suppress_set: TCP ACK Suppress mode 2 -> mode 0
[ 3.631663] dhd_wl_ioctl: returning as busstate=0
[ 3.632088] dhd_dbg_detach_pkt_monitor, 2204
[ 3.632494] dhd_bus_devreset: == Power OFF ==
[ 3.633418] bcmsdh_oob_intr_unregister: Enter
[ 3.633811] bcmsdh_oob_intr_unregister: irq is not registered
[ 3.634385] dhd_txglom_enable: enable 0
[ 3.634742] dhd_conf_set_txglom_params: txglom_mode=copy
[ 3.635222] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0
[ 3.635834] dhd_conf_set_txglom_params: txinrx_thres=128, dhd_txminmax=-1
[ 3.636455] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
[ 3.637072] dhd_bus_devreset:WLAN OFF DONE
[ 3.637648] wifi_platform_set_power = 0
[ 3.638008] ======== PULL WL_REG_ON(-1) LOW! ========
[ 3.638481] : rockchip_wifi_power: 0
[ 3.638915] : wifi shut off power.
[ 3.639338] dhdsdio_probe : the lock is released.
[ 3.639881] dhd_module_init: Exit err=0
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
[ 4.615956] EXT4-fs (mmcblk1p7): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Warning: overlayroot: configuring overlayroot with driver=overlay mode=device opts='dev=PARTLABEL=userdae
[ 4.842880] EXT4-fs (mmcblk1p8): recovery complete
[ 4.844019] EXT4-fs (mmcblk1p8): mounted filesystem with ordered data mode. Opts: (null)
Success: overlayroot: configured root with 'device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' using overlay per kernel cmdline
Warning: Something odd, no /lib/modules/4.4.194+ in initramfs.
done.
[ 5.113384] systemd: System time before build time, advancing clock.
[ 5.118560] cgroup: cgroup2: unknown option "nsdelegate"
[ 5.129649] systemd: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA
页:
[1]