frankseu 发表于 2016-10-13 23:08:06

烧写update.img后无法启动,麻烦各位大佬帮忙看看

烧写update.img后无法启动,麻烦各位大佬帮忙看看:
1 按照编译指导编译出各种img文件;
2 按照windows下update.bin打包方式完成打包;
3 烧写正常,但是无法启动;
日志如下:

U-Boot 2014.10-RK3288-10-g65679f1 (Jul 20 2015 - 10:28:11)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 300000000HZ
    ddr pll = 200000000HZ
    codec pll = 594000000HZ
Board:Rockchip platform Board
DRAM:Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
remotectl v0.1
storage init OK!
Using default environment

GetParam
check parameter success
failed to prepare fdt from boot!
power key: bank-0 pin-5
can't find dts node for ricoh619
pmic:act8846
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2015-07-20#2.19
empty serial no.
checkKey
vbus = 0
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
read logo_on switch from dts
no fuel gauge found
checkKey
vbus = 0
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
got recovery cmd from misc.
boot/recovery image sha mismatch!
Unable to boot:recovery
try to start backup
bad image magic.
load boot image failed
ERROR: : bootrk: bad boot or kernel image
Unable to boot:backup
try to start rockusb

frankseu 发表于 2016-10-13 23:08:51

烧写成功的截图为:

guoke5 发表于 2016-10-13 23:30:11

是不是没烧resource.img? update.img里面有包含吗、

frankseu 发表于 2016-10-14 22:24:46

好像不是。我烧写resource.img了还是无法启动。

东风21 发表于 2016-10-18 12:38:47

楼主这个问题解决了吗,我现在也是这样的情况

tangjiang713 发表于 2016-10-22 09:05:17

一样问题,解决了吗?

晚情 发表于 2019-12-8 18:45:21

我也出现一样的问题呢

moccnc 发表于 2021-7-18 18:19:35

有解决吗?

新手上路 发表于 2022-1-21 20:10:23

我也是刷机之后就是一直开不了机

YG-閸氭潙娴 发表于 2022-9-15 15:47:53

哎,我的是烧写都没成功
页: [1] 2
查看完整版本: 烧写update.img后无法启动,麻烦各位大佬帮忙看看