编译好内核下载到板子启动不出来，求大神指导~~~在线等答案
按照http://wiki.t-firefly.com/index.php/Firefly-RK3288/Build_kerne做的，下载内核之前统一固件Firefly-RK3288_Ubuntu14.04_201611021526.img，自己编译的内核放进去出问题，串口打印：DDR Version 1.00 20160530
In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT
U-Boot 2014.10-RK3288-10 (Oct 13 2016 - 10:04:48)
CPU: rk3288
cpu version = 0
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board: Rockchip platform Board
DRAM:Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 400
SdmmcInit = 2 0
storage init OK!
Using default environment
GetParam
Load FDT from resource image.
power key: bank-0 pin-5
pmic:act8846
can't find dts node for pwm1
DCDC vdd_logic has been used, pwm regulator not init it.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2016-10-13#2.30
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts
can't find power_ctr node for lcdc0
pll_src = 1, dclk_hz = 148500000, dclk_div = 2
no fuel gauge found
Hit any key to stop autoboot:0
boot or recovery image sha mismatch!
Unable to boot:boot
try to start recovery
http://blog.csdn.net/kris_fei/article/details/53410703 boot or recovery image sha mismatch!
Unable to boot:boot
提示你boot.img有问题。 isle 发表于 2016-12-5 10:28
boot or recovery image sha mismatch!
Unable to boot:boot
提示你boot.img有问题。
编译都是按照WIKI上做的，做的过程也没出现错误。不知道怎么弄了{:4_158:} 按照wiki上做应该没有问题，在重新做一次试试。论坛上之前也有很多帖子讨论的，搜搜看。 可以开机？问题描述的清楚点，不然弄不懂你的问题是什么。 同样问题 请问版主问题解决了吗（我用的内核firefly-3.14-kernel）按照http://developer.t-firefly.com/thread-10907-1-1.html做
开发板为RK3288原先烧录固件为Firefly-RK3288_Ubuntu14.04_201611211031.img
想换个自己编译的内核
DDR Version 1.00 20160530
In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
OUT
U-Boot 2014.10-RK3288-10 (Mar 13 2017 - 18:07:53)
CPU: rk3288
cpu version = 0
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board:Rockchip platform Board
DRAM:Found dram banks: 1
Adding bank:0000000000000000(0000000100000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 400
SdmmcInit = 2 0
storage init OK!
Using default environment
GetParam
Load FDT from boot image.
power key: bank-0 pin-5
pmic:act8846
can't find dts node for pwm1
DCDC vdd_logic has been used, pwm regulator not init it.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2017-03-13#2.30
empty serial no.
reboot to rockusb.
DDR Version 1.00 20160530
In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
OUT
U-Boot 2014.10-RK3288-10 (Mar 13 2017 - 18:07:53)
CPU: rk3288
cpu version = 0
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board:Rockchip platform Board
DRAM:Found dram banks: 1
Adding bank:0000000000000000(0000000100000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 400
SdmmcInit = 2 0
storage init OK!
Using default environment
GetParam
Load FDT from boot image.
no key node
pmic:act8846
can't find dts node for pwm0
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2017-03-13#2.30
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts
no fuel gauge found
Hit any key to stop autoboot:0
boot or recovery image sha mismatch!
Unable to boot:boot
try to start recovery
'recovery' does not seem to be a partition nor an address
Unable to boot:recovery
try to start backup
ERROR: : bootrk: bad boot or kernel image
Unable to boot:backup
try to start rockusb 今天自己修改编译内核，遇到和楼上同样的问题，
#Boot ver: 2016-10-13#2.30
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts
no fuel gauge found
misc partition not found!
Hit any key to stop autoboot:0
boot or recovery image sha mismatch!
Unable to boot:boot
try to start recovery
'recovery' does not seem to be a partition nor an address
Unable to boot:recovery
try to start backup
ERROR: : bootrk: bad boot or kernel image
Unable to boot:backup
try to start rockusb
求解答
用官方：Firefly-RK3288_Ubuntu16.04_HDMI_VGA_DiffDisplay_20170215
刷自编译：firefly-3.14-kernel
烧录boot 地址用的0x00002000
请问有谁知道原因么
妈的，真想骂娘，我也遇到了这个问题，官方就不能给个完整镜像对应的内核版本吗？？？？！！垃圾！ 文档也是一塌糊涂，按照文档操作根本就不行，这个公司咋这么垃圾？
页:
[1]
2