jiangbo 发表于 2017-6-10 11:51:07

[已解决] gitlab上6月9号的kernel wifi不工作

本帖最后由 jiangbo 于 2017-6-10 20:12 编辑

从gitlab上拿更新的kernel（ffc1a16eb9081347d4c32b9b2332d7d4e5b1fcd5）编译后HDMI显示正常了。赞官方的及时回复。
但是，这个版本的wifi不工作了。。。
下面是bootlog和dmesg log。

jiangbo 发表于 2017-6-10 11:51:52

boot log:
DDR Version 1.07 20161103
In
Channel 0: DDR3, 666MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: DDR3, 666MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg = 0x3AA17AA1, stride = 0xD
OUT
Boot1: 2016-07-29, version: 1.05
CPUId = 0x0
ChipType = 10 1842
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29820MB
FwPartOffset=2000 , 100000
SdmmcInit=0 20
StorageInit ok = 62439
LoadTrustBL
No find bl30.bin
No find bl32.bin
theLoader 200000 78322
LoaderFlag2: 0x0
WARNING: plat_rockchip_comm_sram_init:code:ff8d9000, 67000, ef0
NOTICE:BL31: v1.2(debug):b995f80
NOTICE:BL31: Built : 16:53:56, Nov7 2016
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    boot cpu mask: 0
INFO:    Vesion: 2016.0.01
INFO:    plat_rockchip_pmu_init(1211): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.02-RK3399-06-ga7c7ca8 (Apr 25 2017 - 15:10:21)

CPU: rk3399
cpu version = 0
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 594000000HZ
               aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
               aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
               hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
    cpll = 800000000HZ
    dpll = 660000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
Board:Rockchip platform Board
Uboot as second level loader
DRAM:Found dram banks: 1
Adding bank:0000000000200000(00000000ffe00000)
128 MiB
SdmmcInit = 0 20
storage init OK!
Using default environment

GetParam
Load FDT from resource image.
no key node
usb bc: can find node by path: /dwc-control-usb/usb_bc
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=66
CPU's clock information:
    aplll = 816000000HZ
    apllb = 24000000HZ
    gpll = 594000000HZ
               aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
               aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
               hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
    cpll = 800000000HZ
    dpll = 660000000HZ
    vpll = 24000000HZ
    npll = 24000000HZ
    ppll = 676000000HZ
Can't find dts node for fuel guage cw201x
can't find dts node for ec-battery
Can't find dts node for charger bq25700
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2017-04-25#1.05
empty serial no.
normal boot.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts
no fuel gauge found
misc partition not found!
Hit any key to stop autoboot:0
load fdt from resouce.
Secure Boot state: 0
kernel   @ 0x00280000 (0x011a33c0)
ramdisk@ 0x05bf0000 (0x00000000)
bootrk: do_bootm_linux...
   Loading Device Tree to 0000000005600000, end 0000000005613fa3 ... OK
Add bank:0000000000200000, 00000000f7e00000
WARNING: could not set reg FDT_ERR_BADOFFSET.

Starting kernel ...

<hit enter to activate fiq debugger>
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.55 (hunter@hunter-K501LX) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #3 SMP Sat Jun 10 11:15:22 CST 2017
[    0.000000] Boot CPU: AArch64 Processor
[    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ee8000 s46144 r8192 d31680 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 999432
[    0.000000] Kernel command line: console=ttyFIQ0 root=/dev/mmcblk1p6 rw rootwait mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00008000@0x00006000(resource),0x0000A000@0x0000E000(kernel),0x00002000@0x00018000(backup),-@0x0001A000(boot) storagemedia=emmc uboot_logo=0x02000000@0xf5c00000 loader.timestamp=2017-04-25_15:10:21
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB (64MB) mapped at
[    0.000000] Memory: 3903476K/4061184K available (11454K kernel code, 1356K rwdata, 4032K rodata, 1152K init, 767K bss, 157708K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]   modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]   vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8008fb0000 - 0xffffff80090d0000   (1152 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008bb0000   ( 11456 KB)
[    0.000000]   .rodata : 0xffffff8008bb0000 - 0xffffff8008fb0000   (4096 KB)
[    0.000000]       .data : 0xffffff80090d0000 - 0xffffff80092233c0   (1357 KB)
[    0.000000]   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (   8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]   fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (4108 KB)
[    0.000000]   PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]   memory: 0xffffffc000200000 - 0xffffffc0f8000000   (3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]Build-time adjustment of leaf fanout to 64.
[    0.000000]RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @ef000000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000ef080000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000ef090000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[    0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001199] Console: colour dummy device 80x25
[    0.001226] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.001239] pid_max: default: 32768 minimum: 301
[    0.001331] Security Framework initialized
[    0.001341] Yama: becoming mindful.
[    0.001426] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001438] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.002266] Initializing cgroup subsys devices
[    0.002284] Initializing cgroup subsys freezer
[    0.002312] ftrace: allocating 43004 entries in 168 pages
[    0.119854] sched-energy: Sched-energy-costs installed from DT
[    0.119874] CPU0: update cpu_capacity 401
[    0.119932] ASID allocator initialised with 65536 entries
[    0.120765] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.121187] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.122322] Detected VIPT I-cache on CPU1
[    0.122357] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.122393] CPU1: using LPI pending table @0x00000000ef2a0000
[    0.122438] CPU1: update cpu_capacity 401
[    0.122442] CPU1: Booted secondary processor
[    0.122980] Detected VIPT I-cache on CPU2
[    0.123001] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.123034] CPU2: using LPI pending table @0x00000000ef2d0000
[    0.123064] CPU2: update cpu_capacity 401
[    0.123067] CPU2: Booted secondary processor
[    0.123541] Detected VIPT I-cache on CPU3
[    0.123562] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.123596] CPU3: using LPI pending table @0x00000000ef300000
[    0.123624] CPU3: update cpu_capacity 401
[    0.123628] CPU3: Booted secondary processor
[    0.124141] Detected PIPT I-cache on CPU4
[    0.124169] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.124204] CPU4: using LPI pending table @0x00000000ef350000
[    0.124248] CPU4: update cpu_capacity 1024
[    0.124251] CPU4: Booted secondary processor
[    0.124770] Detected PIPT I-cache on CPU5
[    0.124789] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.124822] CPU5: using LPI pending table @0x00000000ef380000
[    0.124851] CPU5: update cpu_capacity 1024
[    0.124854] CPU5: Booted secondary processor
[    0.124939] Brought up 6 CPUs
[    0.125022] SMP: Total of 6 processors activated.
[    0.125031] CPU features: detected feature: GIC system register CPU interface
[    0.125043] CPU: All CPU(s) started at EL2
[    0.125091] alternatives: patching kernel code
[    0.126459] devtmpfs: initialized
[    0.146817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.146848] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.147382] pinctrl core: initialized pinctrl subsystem
[    0.148477] NET: Registered protocol family 16
[    0.152149] cpuidle: using governor ladder
[    0.156172] cpuidle: using governor menu
[    0.156195] Registered FIQ tty driver
[    0.156590] vdso: 2 pages (1 code @ ffffff8008bb6000, 1 data @ ffffff80090d4000)
[    0.156625] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.156821] DMA: preallocated 256 KiB pool for atomic allocations
[    0.247331] console enabled
[    0.247857] Registered fiq debugger ttyFIQ0
[    0.270416] ACPI: Interpreter disabled.
[    0.273173] iommu: Adding device ff650000.vpu_service to group 0
[    0.273783] iommu: Adding device ff660000.rkvdec to group 1
[    0.274358] iommu: Adding device ff8f0000.vop to group 2
[    0.274906] iommu: Adding device ff900000.vop to group 3
[    0.276542] vgaarb: loaded
[    0.277063] SCSI subsystem initialized
[    0.277561] usbcore: registered new interface driver usbfs
[    0.278088] usbcore: registered new interface driver hub
[    0.278637] usbcore: registered new device driver usb
[    0.279175] media: Linux media interface: v0.10
[    0.279603] Linux video capture interface: v2.00
[    0.280054] pps_core: LinuxPPS API ver. 1 registered
[    0.280498] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.281309] PTP clock support registered
[    0.282602] Advanced Linux Sound Architecture Driver Initialized.
[    0.283640] Bluetooth: Core ver 2.21
[    0.283975] NET: Registered protocol family 31
[    0.284376] Bluetooth: HCI device and connection manager initialized
[    0.284937] Bluetooth: HCI socket layer initialized
[    0.285368] Bluetooth: L2CAP socket layer initialized
[    0.285839] Bluetooth: SCO socket layer initialized
[    0.287064] clocksource: Switched to clocksource arch_sys_counter
[    0.317441] pnp: PnP ACPI: disabled
[    0.325716] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.326647] NET: Registered protocol family 2
[    0.327481] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.328306] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.329437] TCP: Hash tables configured (established 32768 bind 32768)
[    0.330114] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.330772] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.331685] NET: Registered protocol family 1
[    0.332369] RPC: Registered named UNIX socket transport module.
[    0.332893] RPC: Registered udp transport module.
[    0.333322] RPC: Registered tcp transport module.
[    0.333735] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.334932] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.335754] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.339385] Initialise system trusted keyring
[    0.347100] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.349255] NFS: Registering the id_resolver key type
[    0.349718] Key type id_resolver registered
[    0.350102] Key type id_legacy registered
[    0.350467] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.351695] fuse init (API version 7.23)
[    0.355949] NET: Registered protocol family 38
[    0.356372] Key type asymmetric registered
[    0.356738] Asymmetric key parser 'x509' registered
[    0.357334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.357988] io scheduler noop registered
[    0.358351] io scheduler deadline registered
[    0.358843] io scheduler cfq registered (default)
[    0.360554] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
[    0.365762] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    0.366371] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    0.366947] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    0.909107] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    0.909746] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    0.911012] rk-vcodec ff650000.vpu_service: No core reset resource define
[    0.911661] rk-vcodec ff650000.vpu_service: do not have pd_video
[    0.912211] rk-vcodec ff650000.vpu_service: probe device
[    0.912709] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc0ee9a3c10
[    0.913466] rk-vcodec ff650000.vpu_service: allocator is drm
[    0.914013] rk-vcodec ff650000.vpu_service: checking hw id 0
[    0.914942] rk-vcodec ff650000.vpu_service: init success
[    0.915794] rk-vcodec ff660000.rkvdec: No core reset resource define
[    0.916466] rk-vcodec ff660000.rkvdec: do not have pd_video
[    0.916965] rk-vcodec ff660000.rkvdec: probe device
[    0.917440] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc0ee9a8410
[    0.918140] rk-vcodec ff660000.rkvdec: allocator is drm
[    0.918648] rk-vcodec ff660000.rkvdec: checking hw id 6876
[    0.919441] rk-vcodec ff660000.rkvdec: init success
[    0.921250] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.921916] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.924142] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.924807] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.926635] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.928757] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[    0.930150] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
[    0.931890] Initialized drm 1.1.0 20060810
[    0.935302] usbcore: registered new interface driver udl
[    0.936997] mali ff9a0000.gpu: Failed to get regulator
[    0.937462] mali ff9a0000.gpu: Power control initialization failed
[    0.938334] Unable to detect cache hierarchy from DT for CPU 0
[    0.947111] brd: module loaded
[    0.952254] loop: module loaded
[    0.953074] zram: Added device: zram0
[    0.953687] lkdtm: No crash points registered, enable through debugfs
[    0.955021] tun: Universal TUN/TAP device driver, 1.6
[    0.955480] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.957346] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    0.957966] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    0.958477] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[    0.959167] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    0.959702] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    0.965270] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    0.965712]Ring mode enabled
[    0.965982]DMA HW capability register supported
[    0.966388]Normal descriptors
[    0.966682]RX Checksum Offload Engine supported (type 2)
[    0.967168]TX Checksum insertion supported
[    0.967542]Wake-Up On Lan supported
[    0.967895]Enable RX Mitigation via HW Watchdog Timer
[    1.030951] libphy: stmmac: probed
[    1.031269] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.031834] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.033317] PPP generic driver version 2.4.2
[    1.033916] usbcore: registered new interface driver rndis_wlan
[    1.034689] dhd_module_init: in
[    1.034699]
[    1.034701] =======================================================
[    1.034703] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    1.034704] =======================================================
[    1.034706] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 2.20.WFD) init.
[    1.034710] : rockchip_wifi_power: 1
[    1.034713] : rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[    1.034715] RTL871X: module init start
[    1.034718] RTL871X: rtl8188eu v4.3.24_16705.20160509
[    1.034794] usbcore: registered new interface driver rtl8188eu
[    1.034796] RTL871X: module init ret=0
[    1.034806] Rockchip WiFi SYS interface (V1.00) ...
[    1.034839] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.034874] usbcore: registered new interface driver pegasus
[    1.034911] usbcore: registered new interface driver rtl8150
[    1.034946] usbcore: registered new interface driver r8152
[    1.034989] usbcore: registered new interface driver asix
[    1.035028] usbcore: registered new interface driver ax88179_178a
[    1.035095] usbcore: registered new interface driver cdc_ether
[    1.035132] usbcore: registered new interface driver dm9601
[    1.035180] usbcore: registered new interface driver smsc75xx
[    1.035226] usbcore: registered new interface driver smsc95xx
[    1.035265] usbcore: registered new interface driver net1080
[    1.035300] usbcore: registered new interface driver rndis_host
[    1.035337] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.035403] usbcore: registered new interface driver cdc_ncm
[    1.035440] usbcore: registered new interface driver cdc_mbim
[    1.036672] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[    1.040260] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[    1.041313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.041323] ehci-pci: EHCI PCI platform driver
[    1.041372] ehci-platform: EHCI generic platform driver
[    1.043197] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.043338] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    1.043430] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    1.049072] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.049196] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.049202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.049207] usb usb1: Product: EHCI Host Controller
[    1.049212] usb usb1: Manufacturer: Linux 4.4.55 ehci_hcd
[    1.049216] usb usb1: SerialNumber: fe3c0000.usb
[    1.049628] hub 1-0:1.0: USB hub found
[    1.049652] hub 1-0:1.0: 1 port detected
[    1.050144] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.050157] ohci-pci: OHCI PCI platform driver
[    1.050203] ohci-platform: OHCI generic platform driver
[    1.050689] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.050830] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    1.050912] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    1.059549] ======== bcm_wlan_set_plat_data ========
[    1.059985] : rockchip_wifi_get_oob_irq: Enter
[    1.060481] : rockchip_wifi_get_oob_irq: rfkill-wlan driver has not Successful initialized
[    1.061305] host_oob_irq: -1
[    1.061560] host_oob_irq_flags=0x4
[    1.061858] dhd_wifi_platform_load: Enter
[    1.062236] Power-up adapter 'DHD generic adapter'
[    1.062689] wifi_platform_set_power = 1
[    1.063026] ======== PULL WL_REG_ON HIGH! ========
[    1.063458] : rockchip_wifi_power: 1
[    1.063871] : rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[    1.105214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.105813] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.106460] usb usb2: Product: Generic Platform OHCI controller
[    1.106980] usb usb2: Manufacturer: Linux 4.4.55 ohci_hcd
[    1.107463] usb usb2: SerialNumber: fe3e0000.usb
[    1.108298] hub 2-0:1.0: USB hub found
[    1.108652] hub 2-0:1.0: 1 port detected
[    1.109806] usbcore: registered new interface driver cdc_acm
[    1.110319] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.111064] usbcore: registered new interface driver cdc_wdm
[    1.111632] usbcore: registered new interface driver usb-storage
[    1.112243] usbcore: registered new interface driver usbserial
[    1.112780] usbcore: registered new interface driver usbserial_generic
[    1.113385] usbserial: USB Serial support registered for generic
[    1.113943] usbcore: registered new interface driver cp210x
[    1.114462] usbserial: USB Serial support registered for cp210x
[    1.115021] usbcore: registered new interface driver ftdi_sio
[    1.115557] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.116283] usbcore: registered new interface driver keyspan
[    1.116798] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    1.117511] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    1.118178] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    1.118835] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    1.119519] usbcore: registered new interface driver option
[    1.120026] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.120744] usbcore: registered new interface driver oti6858
[    1.121270] usbserial: USB Serial support registered for oti6858
[    1.121826] usbcore: registered new interface driver pl2303
[    1.122346] usbserial: USB Serial support registered for pl2303
[    1.122901] usbcore: registered new interface driver qcserial
[    1.123437] usbserial: USB Serial support registered for Qualcomm USB modem
[    1.124095] usbcore: registered new interface driver sierra
[    1.124606] usbserial: USB Serial support registered for Sierra USB modem
[    1.125927] usbcore: registered new interface driver iforce
[    1.126489] usbcore: registered new interface driver xpad
[    1.127245] usbcore: registered new interface driver usbtouchscreen
[    1.128129] i2c /dev entries driver
[    1.129594] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[    1.130288] fan53555-reg: supplied by vcc5v0_sys
[    1.132935] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[    1.133600] fan53555-reg: supplied by vcc5v0_sys
[    1.136599] rk808 0-001b: Pmic Chip id: 0x0
[    1.140179] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.140762] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.141398] DCDC_REG1: supplied by vcc3v3_sys
[    1.142494] DCDC_REG2: supplied by vcc3v3_sys
[    1.143408] DCDC_REG3: supplied by vcc3v3_sys
[    1.144030] DCDC_REG4: supplied by vcc3v3_sys
[    1.144825] LDO_REG1: supplied by vcc3v3_sys
[    1.146286] LDO_REG2: supplied by vcc3v3_sys
[    1.147590] LDO_REG3: supplied by vcc3v3_sys
[    1.148894] LDO_REG4: supplied by vcc3v3_sys
[    1.150234] LDO_REG5: supplied by vcc3v3_sys
[    1.151533] LDO_REG6: supplied by vcc3v3_sys
[    1.152830] LDO_REG7: supplied by vcc3v3_sys
[    1.154171] LDO_REG8: supplied by vcc3v3_sys
[    1.155468] SWITCH_REG1: supplied by vcc3v3_sys
[    1.156124] SWITCH_REG2: supplied by vcc3v3_sys
[    1.159920] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.160936] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009568000
[    1.162203] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff800956a000
[    1.162928] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
[    1.163861] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
[    1.164451] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xferon device rockchip-pinctrl
[    1.165428] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
[    1.166403] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff800956c000
[    1.177083] fusb302 4-0022: port 0 probe success
[    1.177513] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff800956e000
[    1.179213] IR NEC protocol handler initialized
[    1.179616] IR RC5(x/sz) protocol handler initialized
[    1.180077] IR RC6 protocol handler initialized
[    1.180480] IR JVC protocol handler initialized
[    1.180882] IR Sony protocol handler initialized
[    1.181300] IR SANYO protocol handler initialized
[    1.181718] IR Sharp protocol handler initialized
[    1.182148] IR MCE Keyboard/mouse protocol handler initialized
[    1.182664] IR XMP protocol handler initialized
[    1.183147] usbcore: registered new interface driver uvcvideo
[    1.183649] USB Video Class driver (1.1.1)
[    1.185298] rockchip_cpu_avs: cluster0 leakage=20 adjust_volt=0
[    1.185844] rockchip_cpu_avs: cluster1 leakage=33 adjust_volt=0
[    1.187680] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    1.189214] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.190107] Bluetooth: Virtual HCI driver ver 1.5
[    1.190627] Bluetooth: HCI UART driver ver 2.3
[    1.191020] Bluetooth: HCI UART protocol H4 registered
[    1.191482] Bluetooth: HCI UART protocol LL registered
[    1.191932] Bluetooth: HCI UART protocol ATH3K registered
[    1.192474] usbcore: registered new interface driver bfusb
[    1.193003] usbcore: registered new interface driver btusb
[    1.197920] sdhci: Secure Digital Host Controller Interface driver
[    1.198474] sdhci: Copyright(c) Pierre Ossman
[    1.198859] Synopsys Designware Multimedia Card Interface Driver
[    1.200233] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.200891] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.201503] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.202043] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.202928] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.203708] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    1.204256] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    1.205582] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.206245] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.206845] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.207391] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    1.208257] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.209086] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    1.209868] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.210663] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.222121] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.233337] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    1.234226] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.236520] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    1.237046] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    1.249478] fusb302 4-0022: CC connected in 0 as UFP
[    1.263154] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[    1.265080] wifi_platform_bus_enumerate device present 1
[    1.265552] ======== Card detection to detect SDIO card! ========
[    1.265688] hidraw: raw HID events driver (C) Jiri Kosina
[    1.266467] usbcore: registered new interface driver usbhid
[    1.266469] usbhid: USB HID core driver
[    1.266729] ashmem: initialized
[    1.267666] sdio: host isn'tinitialization successfully.
[    1.269540] usbcore: registered new interface driver snd-usb-audio
[    1.285518] u32 classifier
[    1.285772] Netfilter messages via NETLINK v0.30.
[    1.286271] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.287126] ctnetlink v0.93: registering with nfnetlink.
[    1.287739] ip_set: protocol 6
[    1.288017] IPVS: Registered protocols ()
[    1.288535] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    1.289269] IPVS: Creating netns size=1592 id=0
[    1.289694] IPVS: ipvs loaded.
[    1.290270] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.290841] Initializing XFRM netlink socket
[    1.291839] NET: Registered protocol family 10
[    1.293318] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.295008] sit: IPv6 over IPv4 tunneling driver
[    1.295971] NET: Registered protocol family 17
[    1.296398] NET: Registered protocol family 15
[    1.296821] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.297954] Bridge firewalling registered
[    1.298612] Bluetooth: RFCOMM socket layer initialized
[    1.299100] Bluetooth: RFCOMM ver 1.11
[    1.299443] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.299967] Bluetooth: HIDP socket layer initialized
[    1.300782] 8021q: 802.1Q VLAN Support v1.8
[    1.301186] lib80211: common routines for IEEE802.11 drivers
[    1.301723] : Enter rfkill_wlan_init
[    1.302423] : Enter rfkill_wlan_probe
[    1.302893] : wlan_platdata_parse_dt: wifi_chip_type = ap6354
[    1.303506] : wlan_platdata_parse_dt: enable wifi power control.
[    1.304137] : wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.304832] : wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    1.305628] : rfkill_wlan_probe: init gpio
[    1.306096] : Exit rfkill_wlan_probe
[    1.306555] : Enter rfkill_rk_init
[    1.306962] mmc1: MAN_BKOPS_EN bit is not set
[    1.307701] : bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    1.308477] : bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    1.309206] : bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[    1.309916] : bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    1.311469] : Request irq for bt wakeup host
[    1.313066] : ** disable irq
[    1.313113] : BT_WAKE_HOST IRQ fired
[    1.313932] : bt_default device registered.
[    1.314459] Key type dns_resolver registered
[    1.317367] Registered cp15_barrier emulation handler
[    1.318409] Registered setend emulation handler
[    1.320944] Loading compiled-in X.509 certificates
[    1.323041] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
[    1.324241] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    1.325763] mmcblk1: mmc1:0001 BJNB4R 29.1 GiB
[    1.326887] mmcblk1boot0: mmc1:0001 BJNB4R partition 1 4.00 MiB
[    1.327041] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008c31d80)
[    1.327198] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008c31d80)
[    1.327571] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    1.327590] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.327642] dwhdmi-rockchip ff940000.hdmi: Detected HDMI controller 0x21:0x1a:0xa0:0xc1
[    1.329311] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008c2d7e8)
[    1.329689] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008c2dff8)
[    1.329740] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[    1.329752] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.329755] No driver support for vblank timestamp query.
[    1.329834] rockchip-drm display-subsystem: failed to parse loader memory
[    1.335965] mmcblk1boot1: mmc1:0001 BJNB4R partition 2 4.00 MiB
[    1.337452] mmcblk1rpmb: mmc1:0001 BJNB4R partition 3 4.00 MiB
[    1.338354]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    1.338829]      trust: 0x000800000 -- 0x000c00000 (4 MB)
[    1.339315]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    1.339796]   kernel: 0x001c00000 -- 0x003000000 (20 MB)
[    1.340282]   backup: 0x003000000 -- 0x003400000 (4 MB)
[    1.340754]       boot: 0x003400000 -- 0x747800000 (29764 MB)
[    1.341279]mmcblk1: p1 p2 p3 p4 p5 p6
[    1.351083] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.446316] Console: switching to colour frame buffer device 240x67
[    1.459241] rockchip-drm display-subsystem: fb0:frame buffer device
[    1.466377] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    1.466957] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[    1.467552] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.468182] usb 1-1: Product: USB 2.0 Hub
[    1.469061] hub 1-1:1.0: USB hub found
[    1.469598] hub 1-1:1.0: 7 ports detected
[    1.470158] I : : drivers/gpu/arm/midgard_for_linux/backend/gpu/mali_kbase_devfreq.c; : 271; : kbase_devfreq_init(); success initing power_model_simple.
[    1.472215] mali ff9a0000.gpu: Probed as mali0
[    1.475614] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    1.476271] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3
[    1.477050] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00030010
[    1.477843] xhci-hcd xhci-hcd.6.auto: irq 227, io mem 0xfe800000
[    1.478449] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.479041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.479681] usb usb3: Product: xHCI Host Controller
[    1.480116] usb usb3: Manufacturer: Linux 4.4.55 xhci-hcd
[    1.480586] usb usb3: SerialNumber: xhci-hcd.6.auto
[    1.481342] hub 3-0:1.0: USB hub found
[    1.481684] hub 3-0:1.0: 1 port detected
[    1.482191] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    1.482756] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 4
[    1.483460] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.484216] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.484807] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.485441] usb usb4: Product: xHCI Host Controller
[    1.485867] usb usb4: Manufacturer: Linux 4.4.55 xhci-hcd
[    1.486345] usb usb4: SerialNumber: xhci-hcd.6.auto
[    1.487075] hub 4-0:1.0: USB hub found
[    1.487416] hub 4-0:1.0: 1 port detected
[    1.488481] xhci-hcd xhci-hcd.6.auto: remove, state 1
[    1.488932] usb usb4: USB disconnect, device number 1
[    1.512988] xhci-hcd xhci-hcd.6.auto: Host not halted after 16000 microseconds.
[    1.513625] xhci-hcd xhci-hcd.6.auto: Host controller not halted, aborting reset.
[    1.514300] xhci-hcd xhci-hcd.6.auto: USB bus 4 deregistered
[    1.514893] xhci-hcd xhci-hcd.6.auto: remove, state 1
[    1.515353] usb usb3: USB disconnect, device number 1
[    1.516080] xhci-hcd xhci-hcd.6.auto: USB bus 3 deregistered
[    1.519816] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    1.520417] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
[    1.521199] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00030010
[    1.521979] xhci-hcd xhci-hcd.7.auto: irq 228, io mem 0xfe900000
[    1.522585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.523186] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.523814] usb usb3: Product: xHCI Host Controller
[    1.524246] usb usb3: Manufacturer: Linux 4.4.55 xhci-hcd
[    1.524716] usb usb3: SerialNumber: xhci-hcd.7.auto
[    1.525374] hub 3-0:1.0: USB hub found
[    1.525715] hub 3-0:1.0: 1 port detected
[    1.526204] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    1.526754] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
[    1.527454] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.528205] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.528796] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.529429] usb usb4: Product: xHCI Host Controller
[    1.529854] usb usb4: Manufacturer: Linux 4.4.55 xhci-hcd
[    1.530328] usb usb4: SerialNumber: xhci-hcd.7.auto
[    1.530968] hub 4-0:1.0: USB hub found
[    1.531314] hub 4-0:1.0: 1 port detected
[    1.533422] ehci-platform fe380000.usb: EHCI Host Controller
[    1.534003] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[    1.534769] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    1.541067] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.541670] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.542271] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.542899] usb usb5: Product: EHCI Host Controller
[    1.543330] usb usb5: Manufacturer: Linux 4.4.55 ehci_hcd
[    1.543800] usb usb5: SerialNumber: fe380000.usb
[    1.544444] hub 5-0:1.0: USB hub found
[    1.544782] hub 5-0:1.0: 1 port detected
[    1.545501] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.546188] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[    1.546928] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    1.602519] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.603161] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.603806] usb usb6: Product: Generic Platform OHCI controller
[    1.604355] usb usb6: Manufacturer: Linux 4.4.55 ohci_hcd
[    1.604837] usb usb6: SerialNumber: fe3a0000.usb
[    1.606448] hub 6-0:1.0: USB hub found
[    1.606843] hub 6-0:1.0: 1 port detected
[    1.609172] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.609864] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.610501] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.611047] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.611944] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.612794] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    1.613361] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    1.614384] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    1.626416] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.638652] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    1.652340] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[    1.661409] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card0/input0
[    1.665629] asoc-simple-card hdmi-codec: i2s-hifi <-> ff8a0000.i2s mapping ok
[    1.670722] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
[    1.671396] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
[    1.672028] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
[    1.672811] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
[    1.673862] asoc-simple-card: probe of spdif-sound failed with error -22
[    1.676102] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[    1.679318] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 09:18:19 UTC (1358500699)
[    1.688535] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.691590] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.694552] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.698832] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.708851] ret 1024
[    1.710149] ALSA device list:
[    1.710417]   #0: rockchip,rt5640-codec
[    1.710755]   #1: HDMI-CODEC
[    1.712245] EXT4-fs (mmcblk1p6): couldn't mount as ext3 due to feature incompatibilities
[    1.713881] EXT4-fs (mmcblk1p6): couldn't mount as ext2 due to feature incompatibilities
[    1.750288] usb 1-1.2: new low-speed USB device number 3 using ehci-platform
[    1.787037] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    1.828145] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    1.840687] vendor storage:20160801 ret = 0
[    1.847194] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0024
[    1.847815] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.848516] usb 1-1.2: Product: HP Basic USB Keyboard
[    1.848973] usb 1-1.2: Manufacturer: CHICONY
[    1.858685] input: CHICONY HP Basic USB Keyboard as /devices/platform/fe3c0000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:0024.0001/input/input2
[    1.912068] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard on usb-fe3c0000.usb-1.2/input0
[    1.957786] usb 3-1: New USB device found, idVendor=0b95, idProduct=772b
[    1.958437] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.959089] usb 3-1: Product: AX88772B
[    1.959431] usb 3-1: Manufacturer: ASIX Elec. Corp.
[    1.959868] usb 3-1: SerialNumber: 0001E8
[    1.960316] EXT4-fs (mmcblk1p6): 3 orphan inodes deleted
[    1.960805] EXT4-fs (mmcblk1p6): recovery complete
[    1.965849] EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null)
[    1.966674] VFS: Mounted root (ext4 filesystem) on device 179:6.
[    1.967818] devtmpfs: mounted
[    1.969118] Freeing unused kernel memory: 1152K (ffffff8008fb0000 - ffffff80090d0000)
[    1.987283] usb 1-1.4: new low-speed USB device number 4 using ehci-platform
[    2.048733] systemd: System time before build time, advancing clock.
[    2.061791] systemd: Failed to insert module 'autofs4': No such file or directory
[    2.076907] random: systemd: uninitialized urandom read (16 bytes read, 64 bits of entropy available)
[    2.080744] random: systemd: uninitialized urandom read (16 bytes read, 65 bits of entropy available)
[    2.082395] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=1198
[    2.083017] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.083711] usb 1-1.4: Product: HP USB 1000dpi Laser Mouse
[    2.084229] usb 1-1.4: Manufacturer: HP
[    2.084523] systemd: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.086234] systemd: Detected architecture arm64.

Welcome to Ubuntu 16.04.2 LTS!

[    2.089809] systemd: Set hostname to <firefly>.
[    2.093904] input: HP HP USB 1000dpi Laser Mouse as /devices/platform/fe3c0000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:1198.0002/input/input3
[    2.120349] random: systemd: uninitialized urandom read (16 bytes read, 65 bits of entropy available)
[    2.128966] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.129653] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.131423] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.132571] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.134540] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.140234] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.144834] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 67 bits of entropy available)
[    2.146593] hid-generic 0003:03F0:1198.0002: input,hidraw1: USB HID v2.00 Mouse on usb-fe3c0000.usb-1.4/input0
[    2.153614] hid-generic 0003:03F0:1198.0003: hiddev0,hidraw2: USB HID v2.00 Device on usb-fe3c0000.usb-1.4/input1
[    2.154264] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 233
[    2.164048] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    2.164672] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    2.182838] bcmsdh_register: register client driver
[    2.184004] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    2.184780] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    2.185249] bus num (host idx)=2, slot num (rca)=1
[    2.185679] found adapter info 'DHD generic adapter'
[    2.186244] sdioh_attach: set sd_f2_blocksize 128
[    2.187326] bcmsdh_probe: Host OOB irq is not defined
[    2.187781] sdioh_probe: bcmsdh_probe failed
[    2.188737] bcmsdh_sdmmc: probe of mmc2:0001:2 failed with error -12
[    2.320908] systemd: Reached target Encrypted Volumes.
Reached target Encrypted Volumes.
[    2.322411] systemd: Listening on udev Control Socket.
Listening on udev Control Socket.
[    2.323425] systemd: Listening on Journal Socket (/dev/log).
Listening on Journal Socket (/dev/log).
[    2.324366] systemd: Listening on /dev/initctl Compatibility Named Pipe.
Listening on /dev/initctl Compatibility Named Pipe.
[    2.325439] systemd: Listening on Syslog Socket.
Listening on Syslog Socket.
[    2.326494] systemd: Listening on udev Kernel Socket.
Listening on udev Kernel Socket.
[    2.330525] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[    2.335052] systemd: Reached target Remote File Systems (Pre).
Reached target Remote File Systems (Pre).
[    2.336225] systemd: Listening on Journal Socket.
Listening on Journal Socket.
[    2.337276] systemd: Started Forward Password Requests to Wall Directory Watch.
Started Forward Password Requests to Wall Directory Watch.
[    2.338820] systemd: Created slice User and Session Slice.
Created slice User and Session Slice.
[    2.339678] systemd: Reached target User and Group Name Lookups.
Reached target User and Group Name Lookups.
[    2.340718] systemd: Reached target Swap.
Reached target Swap.
[    2.342118] systemd: Created slice System Slice.
Created slice System Slice.
[    2.343212] systemd: Reached target Slices.
Reached target Slices.
[    2.349856] systemd: Starting Load Kernel Modules...
         Starting Load Kernel Modules...
[    2.351548] systemd: Created slice system-serial\x2dgetty.slice.
Created slice system-serial\x2dgetty.slice.
[    2.356472] systemd: Starting Set console keymap...
         Starting Set console keymap...
[    2.362549] systemd: Starting Create Static Device Nodes in /dev...
         Starting Create Static Device Nodes in /dev...
[    2.367822] systemd: Starting Journal Service...
         Starting Journal Service...
[    2.372048] systemd: Mounting Debug File System...
         Mounting Debug File System...
[    2.380642] systemd: Starting Remount Root and Kernel File Systems...
         Starting Remount Root and Kernel File Systems...
[    2.381786] systemd: Reached target Remote File Systems.
Reached target Remote File Systems.
[    2.387715] systemd: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[    2.390022] systemd: Failed to start Load Kernel Modules.
Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[    2.391665] systemd: systemd-modules-load.service: Unit entered failed state.
[    2.396803] systemd: systemd-modules-load.service: Failed with result 'exit-code'.
[    2.398571] systemd: Started Remount Root and Kernel File Systems.
Started Remount Root and Kernel File Systems.
[    2.400104] systemd: Mounted Debug File System.
Mounted Debug File System.
[    2.409619] systemd: Started Create Static Device Nodes in /dev.
Started Create Static Device Nodes in /dev.
[    2.476873] systemd: Starting udev Kernel Device Manager...
         Starting udev Kernel Device Manager...
[    2.479339] systemd: Starting Load/Save Random Seed...
         Starting Load/Save Random Seed...
[    2.483275] systemd: Starting udev Coldplug all Devices...
         Starting udev Coldplug all Devices...
[    2.486184] systemd: Mounting FUSE Control File System...
         Mounting FUSE Control File System...
[    2.489022] systemd: Mounting Configuration File System...
         Mounting Configuration File System...
[    2.492197] systemd: Starting Apply Kernel Variables...
         Starting Apply Kernel Variables...
[    2.495295] systemd: Started Load/Save Random Seed.
Started Load/Save Random Seed.
Mounted Configuration File System.
Mounted FUSE Control File System.
Started Set console keymap.
Started Apply Kernel Variables.
Started Journal Service.
Started udev Kernel Device Manager.
         Starting Flush Journal to Persistent Storage...
Reached target Local File Systems (Pre).
Reached target Local File Systems.
         Starting LSB: AppArmor initialization...
         Starting Set console font and keymap...
         Starting Tell Plymouth To Write Out Runtime Data...
Started Flush Journal to Persistent Storage.
Started Tell Plymouth To Write Out Runtime Data.
         Starting Create Volatile Files and Directories...
Started Create Volatile Files and Directories.
         Starting Update UTMP about System Boot/Shutdown...
         Starting Network Time Synchronization...
Started Network Time Synchronization.
Started LSB: AppArmor initialization.
Started Update UTMP about System Boot/Shutdown.
         Starting Raise network interfaces...
Reached target System Time Synchronized.
Started udev Coldplug all Devices.
Started Dispatch Password Requests to Console Directory Watch.
Reached target Paths.
Reached target System Initialization.
         Starting Socket activation for snappy daemon.
Started Daily apt activities.
Listening on D-Bus System Message Bus Socket.
Started Timer to automatically refresh installed snaps.
Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Started Daily Cleanup of Temporary Directories.
Reached target Timers.
Listening on Socket activation for snappy daemon.
Reached target Sockets.
Reached target Basic System.
Started Regular background program processing daemon.
         Starting Permit User Sessions...
         Starting Avahi mDNS/DNS-SD Stack...
         Starting Accounts Service...
Started D-Bus System Message Bus.
Started Avahi mDNS/DNS-SD Stack.
         Starting LSB: automatic crash report generation...
Started Run anacron jobs.
Started CUPS Scheduler.
         Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
         Starting System Logging Service...
Started Make remote CUPS printers available locally.
         Starting Login Service...
         Starting Network Manager...
         Starting Modem Manager...
         Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
         Starting Save/Restore Sound Card State...
Started Snappy daemon.
         Starting Auto import assertions from block devices...
Started Set console font and keymap.
Started Permit User Sessions.
Started Restore /etc/resolv.conf if...fore the ppp link was shut down.
Found device /dev/ttyFIQ0.
Started System Logging Service.
Started Save/Restore Sound Card State.
Started Auto import assertions from block devices.
Started Network Manager.
Started Login Service.
Started LSB: Set the CPU Frequency Scaling governor to "ondemand".
         Starting Network Manager Script Dispatcher Service...
         Starting Authenticate and Authorize Users to Run Privileged Tasks...
Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Reached target Sound Card.
         Starting Light Display Manager...
Created slice system-getty.slice.
Started LSB: automatic crash report generation.
Started Network Manager Script Dispatcher Service.
Started Authenticate and Authorize Users to Run Privileged Tasks.
Started Accounts Service.
         Starting Load/Save RF Kill Switch Status...
Started Raise network interfaces.
Reached target Network.
Started Unattended Upgrades Shutdown.
         Starting /etc/rc.local Compatibility...
Started /etc/rc.local Compatibility.
Started Modem Manager.
Started Light Display Manager.
         Starting Hold until boot process finishes up...
Started Hold until boot process finishes up.
         Starting Hostname Service...
         Starting Set console scheme...
Started Getty on tty1.
Started Serial Getty on ttyFIQ0.
Reached target Login Prompts.
Reached target Multi-User System.
Reached target Graphical Interface.
         Starting Update UTMP about System Runlevel Changes...
Started Set console scheme.
Started Hostname Service.
Started Update UTMP about System Runlevel Changes.
Started Load/Save RF Kill Switch Status.

Ubuntu 16.04.2 LTS firefly ttyFIQ0

firefly login: root (automatic login)

Last login: Fri Jun9 06:45:34 UTC 2017 on ttyFIQ0
Welcome to Ubuntu 16.04.2 LTS (GNU/Linux 4.4.55 aarch64)

* Documentation:https://help.ubuntu.com
* Management:   https://landscape.canonical.com
* Support:      https://ubuntu.com/advantage
root@firefly:~#
root@firefly:~#
root@firefly:~#

jiangbo 发表于 2017-6-10 11:52:48

dmesg：
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.55 (hunter@hunter-K501LX) (gcc version 4.9.x-google 20140827 (prerelease) (GCC) ) #3 SMP Sat Jun 10 11:15:22 CST 2017
[    0.000000] Boot CPU: AArch64 Processor
[    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[    0.000000] On node 0 totalpages: 1015296
[    0.000000]   DMA zone: 15864 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 1015296 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ee8000 s46144 r8192 d31680 u86016
[    0.000000] pcpu-alloc: s46144 r8192 d31680 u86016 alloc=21*4096
[    0.000000] pcpu-alloc: 0 1 2 3 4 5
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.Total pages: 999432
[    0.000000] Kernel command line: console=ttyFIQ0 root=/dev/mmcblk1p6 rw rootwait mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00008000@0x00006000(resource),0x0000A000@0x0000E000(kernel),0x00002000@0x00018000(backup),-@0x0001A000(boot) storagemedia=emmc uboot_logo=0x02000000@0xf5c00000 loader.timestamp=2017-04-25_15:10:21
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB (64MB) mapped at
[    0.000000] Memory: 3903476K/4061184K available (11454K kernel code, 1356K rwdata, 4032K rodata, 1152K init, 767K bss, 157708K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                   modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
                   vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
                     .init : 0xffffff8008fb0000 - 0xffffff80090d0000   (1152 KB)
                     .text : 0xffffff8008080000 - 0xffffff8008bb0000   ( 11456 KB)
                   .rodata : 0xffffff8008bb0000 - 0xffffff8008fb0000   (4096 KB)
                     .data : 0xffffff80090d0000 - 0xffffff80092233c0   (1357 KB)
                   vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (   8 GB maximum)
                           0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
                   fixed   : 0xffffffbffe7fd000 - 0xffffffbffec00000   (4108 KB)
                   PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
                   memory: 0xffffffc000200000 - 0xffffffc0f8000000   (3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]         Build-time adjustment of leaf fanout to 64.
[    0.000000]         RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @ef000000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000ef080000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000ef090000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[    0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001199] Console: colour dummy device 80x25
[    0.001226] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.001239] pid_max: default: 32768 minimum: 301
[    0.001331] Security Framework initialized
[    0.001341] Yama: becoming mindful.
[    0.001426] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.001438] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.002266] Initializing cgroup subsys devices
[    0.002284] Initializing cgroup subsys freezer
[    0.002312] ftrace: allocating 43004 entries in 168 pages
[    0.119854] sched-energy: Sched-energy-costs installed from DT
[    0.119874] CPU0: update cpu_capacity 401
[    0.119932] ASID allocator initialised with 65536 entries
[    0.120765] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.121187] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.122322] Detected VIPT I-cache on CPU1
[    0.122357] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.122393] CPU1: using LPI pending table @0x00000000ef2a0000
[    0.122438] CPU1: update cpu_capacity 401
[    0.122442] CPU1: Booted secondary processor
[    0.122980] Detected VIPT I-cache on CPU2
[    0.123001] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.123034] CPU2: using LPI pending table @0x00000000ef2d0000
[    0.123064] CPU2: update cpu_capacity 401
[    0.123067] CPU2: Booted secondary processor
[    0.123541] Detected VIPT I-cache on CPU3
[    0.123562] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.123596] CPU3: using LPI pending table @0x00000000ef300000
[    0.123624] CPU3: update cpu_capacity 401
[    0.123628] CPU3: Booted secondary processor
[    0.124141] Detected PIPT I-cache on CPU4
[    0.124169] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.124204] CPU4: using LPI pending table @0x00000000ef350000
[    0.124248] CPU4: update cpu_capacity 1024
[    0.124251] CPU4: Booted secondary processor
[    0.124770] Detected PIPT I-cache on CPU5
[    0.124789] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.124822] CPU5: using LPI pending table @0x00000000ef380000
[    0.124851] CPU5: update cpu_capacity 1024
[    0.124854] CPU5: Booted secondary processor
[    0.124939] Brought up 6 CPUs
[    0.125022] SMP: Total of 6 processors activated.
[    0.125031] CPU features: detected feature: GIC system register CPU interface
[    0.125043] CPU: All CPU(s) started at EL2
[    0.125091] alternatives: patching kernel code
[    0.126459] devtmpfs: initialized
[    0.146817] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.146848] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.147382] pinctrl core: initialized pinctrl subsystem
[    0.147707] regulator-dummy: no parameters
[    0.148477] NET: Registered protocol family 16
[    0.152149] cpuidle: using governor ladder
[    0.156172] cpuidle: using governor menu
[    0.156195] Registered FIQ tty driver
[    0.156590] vdso: 2 pages (1 code @ ffffff8008bb6000, 1 data @ ffffff80090d4000)
[    0.156625] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.156821] DMA: preallocated 256 KiB pool for atomic allocations
[    0.175121] gpiochip_add: registered GPIOs 0 to 31 on device: gpio0
[    0.175228] gpiochip_add: registered GPIOs 32 to 63 on device: gpio1
[    0.175335] gpiochip_add: registered GPIOs 64 to 95 on device: gpio2
[    0.175449] gpiochip_add: registered GPIOs 96 to 127 on device: gpio3
[    0.175551] gpiochip_add: registered GPIOs 128 to 159 on device: gpio4
[    0.247331] console enabled
[    0.247857] Registered fiq debugger ttyFIQ0
[    0.270416] ACPI: Interpreter disabled.
[    0.271182] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator' - status (0)
[    0.271232] vcc3v3_pcie: no parameters
[    0.271381] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 0uV
[    0.271435] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys'
[    0.271451] vcc3v3_sys: 3300 mV
[    0.271565] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
[    0.271699] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator' - status (0)
[    0.271735] vcc5v0_host: no parameters
[    0.271849] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
[    0.271899] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc5v0-sys'
[    0.271914] vcc5v0_sys: 5000 mV
[    0.272025] reg-fixed-voltage vcc5v0-sys: vcc5v0_sys supplying 5000000uV
[    0.272072] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator'
[    0.272090] vcc_phy: no parameters
[    0.272194] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
[    0.272247] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vccadc-ref'
[    0.272276] vcc1v8_sys: 1800 mV
[    0.272398] reg-fixed-voltage vccadc-ref: vcc1v8_sys supplying 1800000uV
[    0.272513] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc-lcd-regulator' - status (0)
[    0.272549] vcc_lcd: no parameters
[    0.272662] reg-fixed-voltage vcc-lcd-regulator: vcc_lcd supplying 0uV
[    0.273173] iommu: Adding device ff650000.vpu_service to group 0
[    0.273783] iommu: Adding device ff660000.rkvdec to group 1
[    0.274358] iommu: Adding device ff8f0000.vop to group 2
[    0.274906] iommu: Adding device ff900000.vop to group 3
[    0.276542] vgaarb: loaded
[    0.277063] SCSI subsystem initialized
[    0.277561] usbcore: registered new interface driver usbfs
[    0.278088] usbcore: registered new interface driver hub
[    0.278637] usbcore: registered new device driver usb
[    0.279175] media: Linux media interface: v0.10
[    0.279603] Linux video capture interface: v2.00
[    0.280054] pps_core: LinuxPPS API ver. 1 registered
[    0.280498] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.281309] PTP clock support registered
[    0.282602] Advanced Linux Sound Architecture Driver Initialized.
[    0.283640] Bluetooth: Core ver 2.21
[    0.283975] NET: Registered protocol family 31
[    0.284376] Bluetooth: HCI device and connection manager initialized
[    0.284937] Bluetooth: HCI socket layer initialized
[    0.285368] Bluetooth: L2CAP socket layer initialized
[    0.285839] Bluetooth: SCO socket layer initialized
[    0.287064] clocksource: Switched to clocksource arch_sys_counter
[    0.317441] pnp: PnP ACPI: disabled
[    0.325716] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.326647] NET: Registered protocol family 2
[    0.327481] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.328306] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.329437] TCP: Hash tables configured (established 32768 bind 32768)
[    0.330114] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.330772] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.331685] NET: Registered protocol family 1
[    0.332369] RPC: Registered named UNIX socket transport module.
[    0.332893] RPC: Registered udp transport module.
[    0.333322] RPC: Registered tcp transport module.
[    0.333735] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.334358] PCI: CLS 0 bytes, default 64
[    0.334932] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    0.335754] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    0.339385] Initialise system trusted keyring
[    0.347100] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.349255] NFS: Registering the id_resolver key type
[    0.349718] Key type id_resolver registered
[    0.350102] Key type id_legacy registered
[    0.350467] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    0.351695] fuse init (API version 7.23)
[    0.355949] NET: Registered protocol family 38
[    0.356372] Key type asymmetric registered
[    0.356738] Asymmetric key parser 'x509' registered
[    0.357334] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.357988] io scheduler noop registered
[    0.358351] io scheduler deadline registered
[    0.358843] io scheduler cfq registered (default)
[    0.360250] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree
[    0.360262] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
[    0.360499] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: GPIO lookup for consumer otg-vbus
[    0.360509] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: using device tree for GPIO lookup
[    0.360520] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpios' property of node '/syscon@ff770000/usb2-phy@e460'
[    0.360529] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpio' property of node '/syscon@ff770000/usb2-phy@e460'
[    0.360537] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: using lookup tables for GPIO lookup
[    0.360545] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: lookup for GPIO otg-vbus failed
[    0.360554] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
[    0.361431] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
[    0.361505] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.1 err -2
[    0.362212] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree
[    0.362223] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
[    0.363324] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
[    0.363335] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
[    0.363427] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
[    0.363437] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
[    0.363755] phy phy-phy@e220.5: Looking up phy-supply from device tree
[    0.363765] phy phy-phy@e220.5: Looking up phy-supply property in node /phy@e220 failed
[    0.365468] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
[    0.365478] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
[    0.365503] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000' - status (0)
[    0.365738] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
[    0.365749] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply property in node /pcie@f8000000 failed
[    0.365762] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    0.366350] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
[    0.366360] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
[    0.366371] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    0.366928] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
[    0.366937] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
[    0.366947] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    0.909107] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    0.909746] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    0.911012] rk-vcodec ff650000.vpu_service: No core reset resource define
[    0.911661] rk-vcodec ff650000.vpu_service: do not have pd_video
[    0.912211] rk-vcodec ff650000.vpu_service: probe device
[    0.912709] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc0ee9a3c10
[    0.913466] rk-vcodec ff650000.vpu_service: allocator is drm
[    0.914013] rk-vcodec ff650000.vpu_service: checking hw id 0
[    0.914942] rk-vcodec ff650000.vpu_service: init success
[    0.915794] rk-vcodec ff660000.rkvdec: No core reset resource define
[    0.916466] rk-vcodec ff660000.rkvdec: do not have pd_video
[    0.916965] rk-vcodec ff660000.rkvdec: probe device
[    0.917440] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc0ee9a8410
[    0.918140] rk-vcodec ff660000.rkvdec: allocator is drm
[    0.918648] rk-vcodec ff660000.rkvdec: checking hw id 6876
[    0.919441] rk-vcodec ff660000.rkvdec: init success
[    0.921250] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.921916] dma-pl330 ff6d0000.dma-controller:         DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    0.924142] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    0.924807] dma-pl330 ff6e0000.dma-controller:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.926014] pwm-regulator vdd-log: GPIO lookup for consumer enable
[    0.926022] pwm-regulator vdd-log: using device tree for GPIO lookup
[    0.926033] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log'
[    0.926041] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log'
[    0.926048] pwm-regulator vdd-log: using lookup tables for GPIO lookup
[    0.926069] pwm-regulator vdd-log: lookup for GPIO enable failed
[    0.926095] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    0.926104] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    0.926125] vdd_log: 800 <--> 1400 mV at 1004 mV
[    0.926275] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    0.926285] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    0.926635] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.928757] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[    0.930150] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 37, base_baud = 1500000) is a 16550A
[    0.931890] Initialized drm 1.1.0 20060810
[    0.935302] usbcore: registered new interface driver udl
[    0.936976] mali ff9a0000.gpu: Looking up mali-supply from device tree
[    0.936997] mali ff9a0000.gpu: Failed to get regulator
[    0.937462] mali ff9a0000.gpu: Power control initialization failed
[    0.938334] Unable to detect cache hierarchy from DT for CPU 0
[    0.947111] brd: module loaded
[    0.952254] loop: module loaded
[    0.953074] zram: Added device: zram0
[    0.953687] lkdtm: No crash points registered, enable through debugfs
[    0.955021] tun: Universal TUN/TAP device driver, 1.6
[    0.955480] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.957250] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
[    0.957346] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    0.957966] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[    0.958477] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[    0.959167] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    0.959702] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    0.965270] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    0.965712]Ring mode enabled
[    0.965982]DMA HW capability register supported
[    0.966388]Normal descriptors
[    0.966682]RX Checksum Offload Engine supported (type 2)
[    0.967168]TX Checksum insertion supported
[    0.967542]Wake-Up On Lan supported
[    0.967895]Enable RX Mitigation via HW Watchdog Timer
[    0.968454] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000' - status (0)
[    1.030951] libphy: stmmac: probed
[    1.031269] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    1.031834] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    1.033317] PPP generic driver version 2.4.2
[    1.033916] usbcore: registered new interface driver rndis_wlan
[    1.034689] dhd_module_init: in

[    1.034701] =======================================================
[    1.034703] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    1.034704] =======================================================
[    1.034706] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 2.20.WFD) init.
[    1.034710] : rockchip_wifi_power: 1
[    1.034713] : rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[    1.034715] RTL871X: module init start
[    1.034718] RTL871X: rtl8188eu v4.3.24_16705.20160509
[    1.034794] usbcore: registered new interface driver rtl8188eu
[    1.034796] RTL871X: module init ret=0
[    1.034806] Rockchip WiFi SYS interface (V1.00) ...
[    1.034839] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.034874] usbcore: registered new interface driver pegasus
[    1.034911] usbcore: registered new interface driver rtl8150
[    1.034946] usbcore: registered new interface driver r8152
[    1.034989] usbcore: registered new interface driver asix
[    1.035028] usbcore: registered new interface driver ax88179_178a
[    1.035095] usbcore: registered new interface driver cdc_ether
[    1.035132] usbcore: registered new interface driver dm9601
[    1.035180] usbcore: registered new interface driver smsc75xx
[    1.035226] usbcore: registered new interface driver smsc95xx
[    1.035265] usbcore: registered new interface driver net1080
[    1.035300] usbcore: registered new interface driver rndis_host
[    1.035337] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.035403] usbcore: registered new interface driver cdc_ncm
[    1.035440] usbcore: registered new interface driver cdc_mbim
[    1.036672] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[    1.040260] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[    1.041313] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.041323] ehci-pci: EHCI PCI platform driver
[    1.041372] ehci-platform: EHCI generic platform driver
[    1.043197] ehci-platform fe3c0000.usb: EHCI Host Controller
[    1.043338] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[    1.043430] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    1.049072] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    1.049196] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.049202] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.049207] usb usb1: Product: EHCI Host Controller
[    1.049212] usb usb1: Manufacturer: Linux 4.4.55 ehci_hcd
[    1.049216] usb usb1: SerialNumber: fe3c0000.usb
[    1.049628] hub 1-0:1.0: USB hub found
[    1.049652] hub 1-0:1.0: 1 port detected
[    1.050144] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.050157] ohci-pci: OHCI PCI platform driver
[    1.050203] ohci-platform: OHCI generic platform driver
[    1.050689] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    1.050830] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[    1.050912] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    1.059549] ======== bcm_wlan_set_plat_data ========
[    1.059985] : rockchip_wifi_get_oob_irq: Enter
[    1.060481] : rockchip_wifi_get_oob_irq: rfkill-wlan driver has not Successful initialized
[    1.061305] host_oob_irq: -1
[    1.061560] host_oob_irq_flags=0x4
[    1.061858] dhd_wifi_platform_load: Enter
[    1.062236] Power-up adapter 'DHD generic adapter'
[    1.062689] wifi_platform_set_power = 1
[    1.063026] ======== PULL WL_REG_ON HIGH! ========
[    1.063458] : rockchip_wifi_power: 1
[    1.063871] : rockchip_wifi_power: rfkill-wlan driver has not Successful initialized
[    1.105214] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    1.105813] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.106460] usb usb2: Product: Generic Platform OHCI controller
[    1.106980] usb usb2: Manufacturer: Linux 4.4.55 ohci_hcd
[    1.107463] usb usb2: SerialNumber: fe3e0000.usb
[    1.108298] hub 2-0:1.0: USB hub found
[    1.108652] hub 2-0:1.0: 1 port detected
[    1.109806] usbcore: registered new interface driver cdc_acm
[    1.110319] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    1.111064] usbcore: registered new interface driver cdc_wdm
[    1.111632] usbcore: registered new interface driver usb-storage
[    1.112243] usbcore: registered new interface driver usbserial
[    1.112780] usbcore: registered new interface driver usbserial_generic
[    1.113385] usbserial: USB Serial support registered for generic
[    1.113943] usbcore: registered new interface driver cp210x
[    1.114462] usbserial: USB Serial support registered for cp210x
[    1.115021] usbcore: registered new interface driver ftdi_sio
[    1.115557] usbserial: USB Serial support registered for FTDI USB Serial Device
[    1.116283] usbcore: registered new interface driver keyspan
[    1.116798] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    1.117511] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    1.118178] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    1.118835] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    1.119519] usbcore: registered new interface driver option
[    1.120026] usbserial: USB Serial support registered for GSM modem (1-port)
[    1.120744] usbcore: registered new interface driver oti6858
[    1.121270] usbserial: USB Serial support registered for oti6858
[    1.121826] usbcore: registered new interface driver pl2303
[    1.122346] usbserial: USB Serial support registered for pl2303
[    1.122901] usbcore: registered new interface driver qcserial
[    1.123437] usbserial: USB Serial support registered for Qualcomm USB modem
[    1.124095] usbcore: registered new interface driver sierra
[    1.124606] usbserial: USB Serial support registered for Sierra USB modem
[    1.125927] usbcore: registered new interface driver iforce
[    1.126489] usbcore: registered new interface driver xpad
[    1.127245] usbcore: registered new interface driver usbtouchscreen
[    1.128129] i2c /dev entries driver
[    1.129182] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
[    1.129191] fan53555-regulator 0-0040: using device tree for GPIO lookup
[    1.129220] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40' - status (0)
[    1.129594] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[    1.130224] fan53555-regulator 0-0040: Looking up vin-supply from device tree
[    1.130288] fan53555-reg: supplied by vcc5v0_sys
[    1.130696] vcc5v0_sys: could not add device link regulator.9 err -2
[    1.132089] vdd_cpu_b: 712 <--> 1500 mV at 1000 mV
[    1.132392] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.132404] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.132557] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
[    1.132565] fan53555-regulator 0-0041: using device tree for GPIO lookup
[    1.132573] of_get_named_gpiod_flags: can't parse 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41'
[    1.132581] of_get_named_gpiod_flags: can't parse 'vsel-gpio' property of node '/i2c@ff3c0000/syr828@41'
[    1.132588] fan53555-regulator 0-0041: using lookup tables for GPIO lookup
[    1.132597] fan53555-regulator 0-0041: lookup for GPIO vsel failed
[    1.132935] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[    1.133559] fan53555-regulator 0-0041: Looking up vin-supply from device tree
[    1.133600] fan53555-reg: supplied by vcc5v0_sys
[    1.134007] vcc5v0_sys: could not add device link regulator.10 err -2
[    1.135671] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[    1.135961] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.135971] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.136599] rk808 0-001b: Pmic Chip id: 0x0
[    1.140129] rk808 0-001b: GPIO lookup for consumer dvs
[    1.140137] rk808 0-001b: using device tree for GPIO lookup
[    1.140148] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b'
[    1.140156] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b'
[    1.140163] rk808 0-001b: using lookup tables for GPIO lookup
[    1.140171] rk808 0-001b: lookup for GPIO dvs failed
[    1.140179] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    1.140720] rk808 0-001b: GPIO lookup for consumer dvs
[    1.140726] rk808 0-001b: using device tree for GPIO lookup
[    1.140734] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b'
[    1.140742] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b'
[    1.140748] rk808 0-001b: using lookup tables for GPIO lookup
[    1.140755] rk808 0-001b: lookup for GPIO dvs failed
[    1.140762] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    1.141345] rk808 0-001b: Looking up vcc1-supply from device tree
[    1.141398] DCDC_REG1: supplied by vcc3v3_sys
[    1.141784] vcc3v3_sys: could not add device link regulator.11 err -2
[    1.142256] vdd_center: 750 <--> 1350 mV at 900 mV
[    1.142403] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.142415] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.142458] rk808 0-001b: Looking up vcc2-supply from device tree
[    1.142494] DCDC_REG2: supplied by vcc3v3_sys
[    1.142880] vcc3v3_sys: could not add device link regulator.12 err -2
[    1.143196] vdd_cpu_l: 750 <--> 1350 mV at 900 mV
[    1.143325] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.143336] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.143374] rk808 0-001b: Looking up vcc3-supply from device tree
[    1.143408] DCDC_REG3: supplied by vcc3v3_sys
[    1.143793] vcc3v3_sys: could not add device link regulator.13 err -2
[    1.143824] vcc_ddr: at 3300 mV
[    1.143943] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.143953] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.143995] rk808 0-001b: Looking up vcc4-supply from device tree
[    1.144030] DCDC_REG4: supplied by vcc3v3_sys
[    1.144432] vcc3v3_sys: could not add device link regulator.14 err -2
[    1.144612] vcc_1v8: 1800 mV
[    1.144736] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.144747] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.144791] rk808 0-001b: Looking up vcc6-supply from device tree
[    1.144825] LDO_REG1: supplied by vcc3v3_sys
[    1.145219] vcc3v3_sys: could not add device link regulator.15 err -2
[    1.146066] vcc1v8_dvp: 1800 mV
[    1.146198] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.146208] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.146252] rk808 0-001b: Looking up vcc6-supply from device tree
[    1.146286] LDO_REG2: supplied by vcc3v3_sys
[    1.146663] vcc3v3_sys: could not add device link regulator.16 err -2
[    1.147372] vcc3v0_tp: 3000 mV
[    1.147500] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.147510] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.147556] rk808 0-001b: Looking up vcc7-supply from device tree
[    1.147590] LDO_REG3: supplied by vcc3v3_sys
[    1.147968] vcc3v3_sys: could not add device link regulator.17 err -2
[    1.148671] vcc1v8_pmu: 1800 mV
[    1.148799] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.148808] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.148860] rk808 0-001b: Looking up vcc9-supply from device tree
[    1.148894] LDO_REG4: supplied by vcc3v3_sys
[    1.149287] vcc3v3_sys: could not add device link regulator.18 err -2
[    1.149984] vcc_sd: 1800 <--> 3300 mV at 3000 mV
[    1.150140] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.150150] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.150199] rk808 0-001b: Looking up vcc9-supply from device tree
[    1.150234] LDO_REG5: supplied by vcc3v3_sys
[    1.150611] vcc3v3_sys: could not add device link regulator.19 err -2
[    1.151311] vcca3v0_codec: 3000 mV
[    1.151438] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.151447] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.151497] rk808 0-001b: Looking up vcc10-supply from device tree
[    1.151533] LDO_REG6: supplied by vcc3v3_sys
[    1.151909] vcc3v3_sys: could not add device link regulator.20 err -2
[    1.152608] vcc_1v5: 1500 mV
[    1.152735] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.152744] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.152797] rk808 0-001b: Looking up vcc7-supply from device tree
[    1.152830] LDO_REG7: supplied by vcc3v3_sys
[    1.153224] vcc3v3_sys: could not add device link regulator.21 err -2
[    1.153921] vcca1v8_codec: 1800 mV
[    1.154071] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.154081] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.154136] rk808 0-001b: Looking up vcc11-supply from device tree
[    1.154171] LDO_REG8: supplied by vcc3v3_sys
[    1.154548] vcc3v3_sys: could not add device link regulator.22 err -2
[    1.155245] vcc_3v0: 3000 mV
[    1.155373] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.155382] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.155435] rk808 0-001b: Looking up vcc8-supply from device tree
[    1.155468] SWITCH_REG1: supplied by vcc3v3_sys
[    1.155868] vcc3v3_sys: could not add device link regulator.23 err -2
[    1.155899] vcc3v3_s3: at 3300 mV
[    1.156005] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.156015] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.156089] rk808 0-001b: Looking up vcc12-supply from device tree
[    1.156124] SWITCH_REG2: supplied by vcc3v3_sys
[    1.156524] vcc3v3_sys: could not add device link regulator.24 err -2
[    1.156562] vcc3v3_s0: at 3300 mV
[    1.156670] pwm-regulator vdd-log: Looking up pwm-supply from device tree
[    1.156679] pwm-regulator vdd-log: Looking up pwm-supply property in node /vdd-log failed
[    1.159920] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    1.160936] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009568000
[    1.162203] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff800956a000
[    1.162928] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
[    1.163861] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
[    1.164451] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xferon device rockchip-pinctrl
[    1.165428] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
[    1.166403] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff800956c000
[    1.167768] fusb302 4-0022: GPIO lookup for consumer int-n
[    1.167777] fusb302 4-0022: using device tree for GPIO lookup
[    1.167803] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22' - status (0)
[    1.167826] fusb302 4-0022: GPIO lookup for consumer vbus-5v
[    1.167833] fusb302 4-0022: using device tree for GPIO lookup
[    1.167855] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22' - status (0)
[    1.167877] fusb302 4-0022: GPIO lookup for consumer vbus-other
[    1.167884] fusb302 4-0022: using device tree for GPIO lookup
[    1.167892] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22'
[    1.167900] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22'
[    1.167907] fusb302 4-0022: using lookup tables for GPIO lookup
[    1.167914] fusb302 4-0022: lookup for GPIO vbus-other failed
[    1.167921] fusb302 4-0022: GPIO lookup for consumer discharge
[    1.167927] fusb302 4-0022: using device tree for GPIO lookup
[    1.167935] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22'
[    1.167942] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22'
[    1.167948] fusb302 4-0022: using lookup tables for GPIO lookup
[    1.167955] fusb302 4-0022: lookup for GPIO discharge failed
[    1.177083] fusb302 4-0022: port 0 probe success
[    1.177513] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff800956e000
[    1.179213] IR NEC protocol handler initialized
[    1.179616] IR RC5(x/sz) protocol handler initialized
[    1.180077] IR RC6 protocol handler initialized
[    1.180480] IR JVC protocol handler initialized
[    1.180882] IR Sony protocol handler initialized
[    1.181300] IR SANYO protocol handler initialized
[    1.181718] IR Sharp protocol handler initialized
[    1.182148] IR MCE Keyboard/mouse protocol handler initialized
[    1.182664] IR XMP protocol handler initialized
[    1.183147] usbcore: registered new interface driver uvcvideo
[    1.183649] USB Video Class driver (1.1.1)
[    1.184464] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
[    1.184644] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
[    1.184697] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
[    1.184749] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
[    1.184802] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
[    1.185298] rockchip_cpu_avs: cluster0 leakage=20 adjust_volt=0
[    1.185844] rockchip_cpu_avs: cluster1 leakage=33 adjust_volt=0
[    1.187680] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    1.189214] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    1.190107] Bluetooth: Virtual HCI driver ver 1.5
[    1.190627] Bluetooth: HCI UART driver ver 2.3
[    1.191020] Bluetooth: HCI UART protocol H4 registered
[    1.191482] Bluetooth: HCI UART protocol LL registered
[    1.191932] Bluetooth: HCI UART protocol ATH3K registered
[    1.192474] usbcore: registered new interface driver bfusb
[    1.193003] usbcore: registered new interface driver btusb
[    1.193861] cpu cpu0: Looking up cpu-supply from device tree
[    1.194177] cpu cpu0: Looking up cpu-supply from device tree
[    1.195444] cpu cpu4: Looking up cpu-supply from device tree
[    1.197920] sdhci: Secure Digital Host Controller Interface driver
[    1.198474] sdhci: Copyright(c) Pierre Ossman
[    1.198859] Synopsys Designware Multimedia Card Interface Driver
[    1.200233] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.200891] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.201503] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.202043] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.202928] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.203645] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
[    1.203655] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
[    1.203683] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
[    1.203692] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
[    1.203708] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    1.204256] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    1.204815] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
[    1.204821] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
[    1.204831] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000'
[    1.204839] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000'
[    1.204846] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
[    1.204854] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
[    1.205582] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    1.206245] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    1.206845] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    1.207391] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    1.208257] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.208966] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
[    1.208975] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed
[    1.208995] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
[    1.209086] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    1.209637] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
[    1.209644] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[    1.209653] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000'
[    1.209661] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000'
[    1.209668] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[    1.209675] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
[    1.209683] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
[    1.209689] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
[    1.209697] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000'
[    1.209705] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000'
[    1.209711] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
[    1.209717] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
[    1.209868] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.210663] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    1.222121] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.233337] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    1.234226] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.235314] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
[    1.235324] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
[    1.235335] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000'
[    1.235343] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000'
[    1.235351] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
[    1.235359] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
[    1.236455] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
[    1.236466] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
[    1.236495] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
[    1.236504] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
[    1.236520] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    1.237046] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    1.249478] fusb302 4-0022: CC connected in 0 as UFP
[    1.263154] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[    1.265080] wifi_platform_bus_enumerate device present 1
[    1.265392] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/power' - status (0)
[    1.265522] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/user' - status (0)
[    1.265552] ======== Card detection to detect SDIO card! ========
[    1.265688] hidraw: raw HID events driver (C) Jiri Kosina
[    1.266467] usbcore: registered new interface driver usbhid
[    1.266469] usbhid: USB HID core driver
[    1.266729] ashmem: initialized
[    1.267279] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
[    1.267666] sdio: host isn'tinitialization successfully.
[    1.269540] usbcore: registered new interface driver snd-usb-audio
[    1.270889] of_get_named_gpiod_flags: parsed 'hp-con-gpio' property of node '/i2c@ff110000/rt5640@1c' - status (0)
[    1.270922] of_get_named_gpiod_flags: can't parse 'realtek,ldo1-en-gpios' property of node '/i2c@ff110000/rt5640@1c'
[    1.285518] u32 classifier
[    1.285772] Netfilter messages via NETLINK v0.30.
[    1.286271] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.287126] ctnetlink v0.93: registering with nfnetlink.
[    1.287739] ip_set: protocol 6
[    1.288017] IPVS: Registered protocols ()
[    1.288535] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[    1.289269] IPVS: Creating netns size=1592 id=0
[    1.289694] IPVS: ipvs loaded.
[    1.290270] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.290841] Initializing XFRM netlink socket
[    1.291839] NET: Registered protocol family 10
[    1.293318] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.295008] sit: IPv6 over IPv4 tunneling driver
[    1.295971] NET: Registered protocol family 17
[    1.296398] NET: Registered protocol family 15
[    1.296821] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[    1.297954] Bridge firewalling registered
[    1.298612] Bluetooth: RFCOMM socket layer initialized
[    1.299100] Bluetooth: RFCOMM ver 1.11
[    1.299443] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.299967] Bluetooth: HIDP socket layer initialized
[    1.300782] 8021q: 802.1Q VLAN Support v1.8
[    1.301186] lib80211: common routines for IEEE802.11 drivers
[    1.301682] lib80211_crypt: registered algorithm 'NULL'
[    1.301692] lib80211_crypt: registered algorithm 'WEP'
[    1.301701] lib80211_crypt: registered algorithm 'CCMP'
[    1.301711] lib80211_crypt: registered algorithm 'TKIP'
[    1.301723] : Enter rfkill_wlan_init
[    1.302423] : Enter rfkill_wlan_probe
[    1.302893] : wlan_platdata_parse_dt: wifi_chip_type = ap6354
[    1.303506] : wlan_platdata_parse_dt: enable wifi power control.
[    1.304137] : wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.304785] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan'
[    1.304792] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan'
[    1.304826] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan' - status (0)
[    1.304832] : wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    1.305628] : rfkill_wlan_probe: init gpio
[    1.306096] : Exit rfkill_wlan_probe
[    1.306555] : Enter rfkill_rk_init
[    1.306962] mmc1: MAN_BKOPS_EN bit is not set
[    1.307694] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth' - status (0)
[    1.307701] : bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    1.308447] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth'
[    1.308471] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth' - status (0)
[    1.308477] : bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    1.309200] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth' - status (0)
[    1.309206] : bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[    1.309910] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth' - status (0)
[    1.309916] : bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    1.311469] : Request irq for bt wakeup host
[    1.313066] : ** disable irq
[    1.313113] : BT_WAKE_HOST IRQ fired
[    1.313932] : bt_default device registered.
[    1.314459] Key type dns_resolver registered
[    1.317367] Registered cp15_barrier emulation handler
[    1.318409] Registered setend emulation handler
[    1.320944] Loading compiled-in X.509 certificates
[    1.322385] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree
[    1.322395] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
[    1.322998] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: GPIO lookup for consumer otg-vbus
[    1.323006] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: using device tree for GPIO lookup
[    1.323014] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpios' property of node '/syscon@ff770000/usb2-phy@e450'
[    1.323021] of_get_named_gpiod_flags: can't parse 'otg-vbus-gpio' property of node '/syscon@ff770000/usb2-phy@e450'
[    1.323027] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: using lookup tables for GPIO lookup
[    1.323034] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: lookup for GPIO otg-vbus failed
[    1.323041] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
[    1.324241] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[    1.325095] phy phy-ff770000.syscon:usb2-phy@e450.7: Looking up phy-supply from device tree
[    1.325170] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.7 err -2
[    1.325760] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
[    1.325763] mmcblk1: mmc1:0001 BJNB4R 29.1 GiB
[    1.326190] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
[    1.326282] phy phy-ff7c0000.phy.9: Looking up phy-supply from device tree
[    1.326289] phy phy-ff7c0000.phy.9: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
[    1.326887] mmcblk1boot0: mmc1:0001 BJNB4R partition 1 4.00 MiB
[    1.327041] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008c31d80)
[    1.327198] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008c31d80)
[    1.327571] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    1.327590] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.327642] dwhdmi-rockchip ff940000.hdmi: Detected HDMI controller 0x21:0x1a:0xa0:0xc1
[    1.329311] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008c2d7e8)
[    1.329689] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008c2dff8)
[    1.329740] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[    1.329752] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.329755] No driver support for vblank timestamp query.
[    1.329834] rockchip-drm display-subsystem: failed to parse loader memory
[    1.335965] mmcblk1boot1: mmc1:0001 BJNB4R partition 2 4.00 MiB
[    1.337452] mmcblk1rpmb: mmc1:0001 BJNB4R partition 3 4.00 MiB
[    1.338354]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    1.338829]      trust: 0x000800000 -- 0x000c00000 (4 MB)
[    1.339315]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    1.339796]   kernel: 0x001c00000 -- 0x003000000 (20 MB)
[    1.340282]   backup: 0x003000000 -- 0x003400000 (4 MB)
[    1.340754]       boot: 0x003400000 -- 0x747800000 (29764 MB)
[    1.341279]mmcblk1: p1 p2 p3 p4 p5 p6
[    1.351083] usb 1-1: new high-speed USB device number 2 using ehci-platform
[    1.446316] Console: switching to colour frame buffer device 240x67
[    1.459241] rockchip-drm display-subsystem: fb0:frame buffer device
[    1.464862] mali ff9a0000.gpu: Looking up mali-supply from device tree
[    1.466377] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    1.466957] usb 1-1: New USB device found, idVendor=1a40, idProduct=0201
[    1.467552] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.468182] usb 1-1: Product: USB 2.0 Hub
[    1.469061] hub 1-1:1.0: USB hub found
[    1.469598] hub 1-1:1.0: 7 ports detected
[    1.470158] I : : drivers/gpu/arm/midgard_for_linux/backend/gpu/mali_kbase_devfreq.c; : 271; : kbase_devfreq_init(); success initing power_model_simple.
[    1.472215] mali ff9a0000.gpu: Probed as mali0
[    1.475614] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    1.476271] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3
[    1.477050] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00030010
[    1.477843] xhci-hcd xhci-hcd.6.auto: irq 227, io mem 0xfe800000
[    1.478449] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.479041] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.479681] usb usb3: Product: xHCI Host Controller
[    1.480116] usb usb3: Manufacturer: Linux 4.4.55 xhci-hcd
[    1.480586] usb usb3: SerialNumber: xhci-hcd.6.auto
[    1.481342] hub 3-0:1.0: USB hub found
[    1.481684] hub 3-0:1.0: 1 port detected
[    1.482191] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[    1.482756] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 4
[    1.483460] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.484216] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.484807] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.485441] usb usb4: Product: xHCI Host Controller
[    1.485867] usb usb4: Manufacturer: Linux 4.4.55 xhci-hcd
[    1.486345] usb usb4: SerialNumber: xhci-hcd.6.auto
[    1.487075] hub 4-0:1.0: USB hub found
[    1.487416] hub 4-0:1.0: 1 port detected
[    1.488481] xhci-hcd xhci-hcd.6.auto: remove, state 1
[    1.488932] usb usb4: USB disconnect, device number 1
[    1.512988] xhci-hcd xhci-hcd.6.auto: Host not halted after 16000 microseconds.
[    1.513625] xhci-hcd xhci-hcd.6.auto: Host controller not halted, aborting reset.
[    1.514300] xhci-hcd xhci-hcd.6.auto: USB bus 4 deregistered
[    1.514893] xhci-hcd xhci-hcd.6.auto: remove, state 1
[    1.515353] usb usb3: USB disconnect, device number 1
[    1.516080] xhci-hcd xhci-hcd.6.auto: USB bus 3 deregistered
[    1.519816] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    1.520417] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
[    1.521199] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x00030010
[    1.521979] xhci-hcd xhci-hcd.7.auto: irq 228, io mem 0xfe900000
[    1.522585] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.523186] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.523814] usb usb3: Product: xHCI Host Controller
[    1.524246] usb usb3: Manufacturer: Linux 4.4.55 xhci-hcd
[    1.524716] usb usb3: SerialNumber: xhci-hcd.7.auto
[    1.525374] hub 3-0:1.0: USB hub found
[    1.525715] hub 3-0:1.0: 1 port detected
[    1.526204] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[    1.526754] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
[    1.527454] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    1.528205] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.528796] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.529429] usb usb4: Product: xHCI Host Controller
[    1.529854] usb usb4: Manufacturer: Linux 4.4.55 xhci-hcd
[    1.530328] usb usb4: SerialNumber: xhci-hcd.7.auto
[    1.530968] hub 4-0:1.0: USB hub found
[    1.531314] hub 4-0:1.0: 1 port detected
[    1.533422] ehci-platform fe380000.usb: EHCI Host Controller
[    1.534003] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[    1.534769] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    1.541067] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    1.541670] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    1.542271] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.542899] usb usb5: Product: EHCI Host Controller
[    1.543330] usb usb5: Manufacturer: Linux 4.4.55 ehci_hcd
[    1.543800] usb usb5: SerialNumber: fe380000.usb
[    1.544444] hub 5-0:1.0: USB hub found
[    1.544782] hub 5-0:1.0: 1 port detected
[    1.545501] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    1.546188] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
[    1.546928] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    1.602519] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    1.603161] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.603806] usb usb6: Product: Generic Platform OHCI controller
[    1.604355] usb usb6: Manufacturer: Linux 4.4.55 ohci_hcd
[    1.604837] usb usb6: SerialNumber: fe3a0000.usb
[    1.606448] hub 6-0:1.0: USB hub found
[    1.606843] hub 6-0:1.0: 1 port detected
[    1.609172] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    1.609864] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    1.610501] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    1.611047] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    1.611944] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    1.612677] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply from device tree
[    1.612698] dwmmc_rockchip fe310000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe310000 failed
[    1.612744] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply from device tree
[    1.612762] dwmmc_rockchip fe310000.dwmmc: Looking up vqmmc-supply property in node /dwmmc@fe310000 failed
[    1.612794] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    1.613361] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    1.613932] dwmmc_rockchip fe310000.dwmmc: GPIO lookup for consumer wp
[    1.613945] dwmmc_rockchip fe310000.dwmmc: using device tree for GPIO lookup
[    1.613963] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe310000'
[    1.613980] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe310000'
[    1.613994] dwmmc_rockchip fe310000.dwmmc: using lookup tables for GPIO lookup
[    1.614009] dwmmc_rockchip fe310000.dwmmc: lookup for GPIO wp failed
[    1.614283] platform sdio-pwrseq: GPIO lookup for consumer reset
[    1.614298] platform sdio-pwrseq: using device tree for GPIO lookup
[    1.614341] of_get_named_gpiod_flags: parsed 'reset-gpios' property of node '/sdio-pwrseq' - status (0)
[    1.614384] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    1.626416] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    1.638652] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    1.640649] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/rt5640-sound'
[    1.640673] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/rt5640-sound'
[    1.652340] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[    1.661409] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card0/input0
[    1.664554] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/hdmi-codec'
[    1.664579] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/hdmi-codec'
[    1.665629] asoc-simple-card hdmi-codec: i2s-hifi <-> ff8a0000.i2s mapping ok
[    1.670038] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound'
[    1.670125] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound'
[    1.670722] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
[    1.671396] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
[    1.672028] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
[    1.672811] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
[    1.673862] asoc-simple-card: probe of spdif-sound failed with error -22
[    1.675599] of_get_named_gpiod_flags: parsed 'gpios' property of node '/gpio-keys/button@0' - status (0)
[    1.675677] gpio-5 (GPIO Key Power): gpiod_set_debounce: missing set() or set_debounce() operations
[    1.676102] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[    1.679318] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 09:18:19 UTC (1358500699)
[    1.688535] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[    1.691590] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.694552] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[    1.698832] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[    1.708851] ret 1024
[    1.710149] ALSA device list:
[    1.710417]   #0: rockchip,rt5640-codec
[    1.710755]   #1: HDMI-CODEC
[    1.712245] EXT4-fs (mmcblk1p6): couldn't mount as ext3 due to feature incompatibilities
[    1.713881] EXT4-fs (mmcblk1p6): couldn't mount as ext2 due to feature incompatibilities
[    1.750288] usb 1-1.2: new low-speed USB device number 3 using ehci-platform
[    1.787037] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[    1.828145] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    1.840687] vendor storage:20160801 ret = 0
[    1.847194] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=0024
[    1.847815] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.848516] usb 1-1.2: Product: HP Basic USB Keyboard
[    1.848973] usb 1-1.2: Manufacturer: CHICONY
[    1.858685] input: CHICONY HP Basic USB Keyboard as /devices/platform/fe3c0000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0:0024.0001/input/input2
[    1.912068] hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard on usb-fe3c0000.usb-1.2/input0
[    1.957786] usb 3-1: New USB device found, idVendor=0b95, idProduct=772b
[    1.958437] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.959089] usb 3-1: Product: AX88772B
[    1.959431] usb 3-1: Manufacturer: ASIX Elec. Corp.
[    1.959868] usb 3-1: SerialNumber: 0001E8
[    1.960316] EXT4-fs (mmcblk1p6): 3 orphan inodes deleted
[    1.960805] EXT4-fs (mmcblk1p6): recovery complete
[    1.965849] EXT4-fs (mmcblk1p6): mounted filesystem with ordered data mode. Opts: (null)
[    1.966674] VFS: Mounted root (ext4 filesystem) on device 179:6.
[    1.967818] devtmpfs: mounted
[    1.969118] Freeing unused kernel memory: 1152K (ffffff8008fb0000 - ffffff80090d0000)
[    1.987283] usb 1-1.4: new low-speed USB device number 4 using ehci-platform
[    2.048733] systemd: System time before build time, advancing clock.
[    2.061791] systemd: Failed to insert module 'autofs4': No such file or directory
[    2.076907] random: systemd: uninitialized urandom read (16 bytes read, 64 bits of entropy available)
[    2.080744] random: systemd: uninitialized urandom read (16 bytes read, 65 bits of entropy available)
[    2.082395] usb 1-1.4: New USB device found, idVendor=03f0, idProduct=1198
[    2.083017] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.083711] usb 1-1.4: Product: HP USB 1000dpi Laser Mouse
[    2.084229] usb 1-1.4: Manufacturer: HP
[    2.084523] systemd: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[    2.086234] systemd: Detected architecture arm64.
[    2.089809] systemd: Set hostname to <firefly>.
[    2.093904] input: HP HP USB 1000dpi Laser Mouse as /devices/platform/fe3c0000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:03F0:1198.0002/input/input3
[    2.120349] random: systemd: uninitialized urandom read (16 bytes read, 65 bits of entropy available)
[    2.128966] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.129653] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.131423] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.132571] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.134540] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.140234] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 66 bits of entropy available)
[    2.144834] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 67 bits of entropy available)
[    2.146593] hid-generic 0003:03F0:1198.0002: input,hidraw1: USB HID v2.00 Mouse on usb-fe3c0000.usb-1.4/input0
[    2.153614] hid-generic 0003:03F0:1198.0003: hiddev0,hidraw2: USB HID v2.00 Device on usb-fe3c0000.usb-1.4/input1
[    2.154264] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 233
[    2.164048] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[    2.164672] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[    2.182838] bcmsdh_register: register client driver
[    2.184004] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    2.184780] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[    2.185249] bus num (host idx)=2, slot num (rca)=1
[    2.185679] found adapter info 'DHD generic adapter'
[    2.186244] sdioh_attach: set sd_f2_blocksize 128
[    2.187326] bcmsdh_probe: Host OOB irq is not defined
[    2.187781] sdioh_probe: bcmsdh_probe failed
[    2.188737] bcmsdh_sdmmc: probe of mmc2:0001:2 failed with error -12
[    2.320908] systemd: Reached target Encrypted Volumes.
[    2.322411] systemd: Listening on udev Control Socket.
[    2.323425] systemd: Listening on Journal Socket (/dev/log).
[    2.324366] systemd: Listening on /dev/initctl Compatibility Named Pipe.
[    2.325439] systemd: Listening on Syslog Socket.
[    2.326494] systemd: Listening on udev Kernel Socket.
[    2.330525] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[    2.335052] systemd: Reached target Remote File Systems (Pre).
[    2.336225] systemd: Listening on Journal Socket.
[    2.337276] systemd: Started Forward Password Requests to Wall Directory Watch.
[    2.338820] systemd: Created slice User and Session Slice.
[    2.339678] systemd: Reached target User and Group Name Lookups.
[    2.340718] systemd: Reached target Swap.
[    2.342118] systemd: Created slice System Slice.
[    2.343212] systemd: Reached target Slices.
[    2.349856] systemd: Starting Load Kernel Modules...
[    2.351548] systemd: Created slice system-serial\x2dgetty.slice.
[    2.356472] systemd: Starting Set console keymap...
[    2.362549] systemd: Starting Create Static Device Nodes in /dev...
[    2.367822] systemd: Starting Journal Service...
[    2.372048] systemd: Mounting Debug File System...
[    2.380642] systemd: Starting Remount Root and Kernel File Systems...
[    2.381786] systemd: Reached target Remote File Systems.
[    2.387715] systemd: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[    2.390022] systemd: Failed to start Load Kernel Modules.
[    2.391665] systemd: systemd-modules-load.service: Unit entered failed state.
[    2.396803] systemd: systemd-modules-load.service: Failed with result 'exit-code'.
[    2.398571] systemd: Started Remount Root and Kernel File Systems.
[    2.400104] systemd: Mounted Debug File System.
[    2.409619] systemd: Started Create Static Device Nodes in /dev.
[    2.476873] systemd: Starting udev Kernel Device Manager...
[    2.479339] systemd: Starting Load/Save Random Seed...
[    2.483275] systemd: Starting udev Coldplug all Devices...
[    2.486184] systemd: Mounting FUSE Control File System...
[    2.489022] systemd: Mounting Configuration File System...
[    2.492197] systemd: Starting Apply Kernel Variables...
[    2.495295] systemd: Started Load/Save Random Seed.
[    2.507326] systemd: Mounted Configuration File System.
[    2.507776] systemd: Mounted FUSE Control File System.
[    2.511800] systemd: Started Set console keymap.
[    2.513710] systemd: Started Apply Kernel Variables.
[    2.534144] systemd: Started Journal Service.
[    2.602176] systemd-journald: Received request to flush runtime journal from PID 1
[    2.773991] asix 3-1:1.0 eth1: register 'asix' at usb-xhci-hcd.7.auto-1, ASIX AX88772B USB 2.0 Ethernet, 20:6a:8a:97:45:05
[    3.282338] random: nonblocking pool is initialized
[    3.660744] cfg80211: World regulatory domain updated:
[    3.660768] cfg80211:DFS Master region: unset
[    3.660773] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    3.660781] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    3.660787] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    3.660792] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    3.660799] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    3.660805] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    3.660811] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    3.660816] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    3.660821] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    3.695163] phy phy-ff770000.syscon:usb2-phy@e450.6: charger = USB_SDP_CHARGER
[    3.758150] : ENABLE UART_RTS
[    3.779477] IPVS: Creating netns size=1592 id=1
[    3.852752] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    3.852891] eth0: device MAC address 3e:e5:f3:7a:dc:57
[    3.859075] : DISABLE UART_RTS
[    3.859132] : bt turn on power
[    3.859378] : bt shut off power
[    3.859513] rk_iommu ff903f00.iommu: Unbalanced pm_runtime_enable!
[    3.862212] tty_port_close_start: tty->count = 1 port count = 2.
[    4.162303] fusb302 4-0022: PD disabled
[    4.175868] rockchip-dwc3 usb@fe800000: USB peripheral connected
[    4.231619] asix 3-1:1.0 enx206a8a974505: renamed from eth1
[    4.260368] IPv6: ADDRCONF(NETDEV_UP): enx206a8a974505: link is not ready
[    4.332254] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[    5.030871] IPv6: ADDRCONF(NETDEV_UP): enx206a8a974505: link is not ready
[    5.069122] : ENABLE UART_RTS
[    5.170083] : DISABLE UART_RTS
[    5.170131] : bt turn on power
[    6.240245] ttyS0 - failed to request DMA
[    7.033303] IPv6: ADDRCONF(NETDEV_CHANGE): enx206a8a974505: link becomes ready
[    7.038299] asix 3-1:1.0 enx206a8a974505: link up, 100Mbps, full-duplex, lpa 0x41E1
[    7.872198] IPVS: Creating netns size=1592 id=2
[    8.333123] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[   11.480184] : ENABLE UART_RTS
[   11.581215] : DISABLE UART_RTS
[   11.581283] : bt turn on power
[   14.189232] dhd_wifi_platform_load_sdio: sdio_register_driver timeout or error
[   14.189393] wifi_platform_set_power = 0
[   14.189400] ======== PULL WL_REG_ON LOW! ========
[   14.189407] : rockchip_wifi_power: 0
[   14.189427] : wifi shut off power.
[   14.189433] wifi_platform_bus_enumerate device present 0
[   14.189439] ======== Card detection to remove SDIO card! ========
[   14.189445] mmc2:mmc host rescan start!
[   14.189491] unregister wifi platform drivers
[   14.189497] wifi_platform_bus_enumerate device present 0
[   14.189502] ======== Card detection to remove SDIO card! ========
[   14.189507] mmc2:mmc host rescan start!
[   14.189515] dhd_module_init: Failed to load the driver, try cnt 0
[   14.189541] dhd_module_init: Failed to load driver max retry reached**
[   14.189546] dhd_module_init: Exit err=-62
[   16.334375] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[   32.335449] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[   49.131462] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   49.192664] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   64.336406] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
[   94.157429] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   94.224482] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
cdn-dp fec00000.dp: *ERROR* Timed out trying to load firmware
cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready

zouxf 发表于 2017-6-10 14:36:02

jiangbo 发表于 2017-6-10 20:12:03

试了下，果然好了，赞速度！
commit 6731a7c69a3ff80aaeae879e5892aa5091160b91

btw, 我看log里写了“enable Qualcomm 4G module”，是指sim卡也可以用了吗？

tim 发表于 2017-6-15 10:58:29

jiangbo 发表于 2017-6-10 20:12
试了下，果然好了，赞速度！
commit 6731a7c69a3ff80aaeae879e5892aa5091160b91



你有没有发现有时系统启动不了的问题？

jiangbo 发表于 2017-6-23 16:58:25

tim 发表于 2017-6-15 10:58
你有没有发现有时系统启动不了的问题？

没有发现。

午夏时分 发表于 2023-11-2 13:17:56

请教一下这个是怎么解决的？最近也碰到类似的问题了。rockchip wifi_get oob_irg: rfkill-wlan driver has not successfully initialized

fy759 发表于 2024-4-7 17:32:36

zouxf 发表于 2017-6-10 14:36
已更新，多谢反馈。

为啥这个评论隐藏了

18890049669 发表于 2024-10-24 10:39:43

午夏时分 发表于 2023-11-2 13:17
请教一下这个是怎么解决的？最近也碰到类似的问题了。rockchip wifi_get oob_irg: rfkill-wlan driver has...

你好，请问解决了嘛
页: [1]
查看完整版本: [已解决] gitlab上6月9号的kernel wifi不工作