rv1126 a201开发板上跑yolov5调用摄像头检测报错
在rv1126 a201开发板上跑yolov5调用摄像头检测程序时，项目地址（https://github.com/MontaukLaw/rknn_yolo_rtsp）运行# ./rknn_yolo_rtsp ./yolov5s_relu_tk1_RV1109
_1126_u8_precompile.rknn
最后报错这些就自动退出了[ 1403.492070] rkisp1: no luma buffer available[ 1403.525303] rkisp1: tx stream:4 lose frame:33, isp state:0x201 frame:6
[ 1403.525395] rkisp1: no luma buffer available
[ 1403.558635] rkisp1: tx stream:4 lose frame:34, isp state:0x201 frame:6
[ 1403.558725] rkisp1: no luma buffer available
[ 1403.592031] rkisp1: tx stream:4 lose frame:35, isp state:0x201 frame:6
[ 1403.592127] rkisp1: no luma buffer available
[ 1403.625402] rkisp1: tx stream:4 lose frame:36, isp state:0x201 frame:6
[ 1403.625553] rkisp1: no luma buffer available
[ 1403.658735] rkisp1: tx stream:4 lose frame:37, isp state:0x201 frame:6
[ 1403.658883] rkisp1: no luma buffer available
[ 1403.692030] rkisp1: tx stream:4 lose frame:38, isp state:0x201 frame:6
[ 1403.692126] rkisp1: no luma buffer available
[ 1403.706347] rkispp1: stream:3 stop timeout
[ 1403.725355] rkisp1: tx stream:4 lose frame:39, isp state:0x201 frame:6
[ 1403.725450] rkisp1: no luma buffer available
[ 1404.719551] rkisp-bridge-ispp: bridge_stop timeout ret:0
[ 1404.719903] rockchip-mipi-dphy-rx ff4b8000.csi-dphy: stream on:0
Segmentation fault (core dumped)
我看log记录中有#Get packet-2, size 5185
说明开始推流了，但只收到packet-2后面就报上面的错后程序就退出了
已解决 yby 发表于 2023-3-17 20:59
已解决
请问您是怎么解决的呢
同问，楼主怎么解决的？
我们也在1126上遇到这个问题，运行一段时间后提示no luma buffer available：
2023-08-03T16:06:55.213 - rkcif_mipi_lvds: not active buffer, skip current frame, mipi/lvds stream
2023-08-03T16:06:55.254 - rkcif_mipi_lvds: no luma buffer available
2023-08-03T16:06:55.384 - rkisp0: tx stream:4 lose frame:16241, isp state:0x201 frame:16238
2023-08-03T16:06:55.463 - rkisp0: no luma buffer available yeguopeng 发表于 2023-8-4 10:53
同问，楼主怎么解决的？
我们也在1126上遇到这个问题，运行一段时间后提示no luma buffer available：
20 ...
我当时忘把cocolist放到项目里了
页:
[1]