RK3399 CSI MIPI IMX581 出图失败
本帖最后由 dogpi 于 2023-11-14 17:34 编辑1. 在此之前添加过索尼IMX709 sensor摄像头的CSI驱动，能够点亮出图
2. 在IMX709的基础上修改setting等配置参数，编译驱动后无法出图。
imx581: imx581@1a {
compatible = "ovti,imx581";
status = "disabled";
reg = <0x1a>;
clocks = <&cru SCLK_CIF_OUT>;
clock-names = "xvclk";
reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
pwdn-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "rockchip,camera_default", "rockchip,camera_sleep";
//pinctrl-0 = <&cif_clkout>;
pinctrl-0 = <&cam0_default_pins>;
pinctrl-1 = <&cam0_sleep_pins>;
rockchip,camera-module-index = <0>;
rockchip,camera-module-facing = "back";
rockchip,camera-module-name = "CMK-CT0116";
rockchip,camera-module-lens-name = "Largan-50013A1";
avdd-supply = <&vcc_mipi>;
dovdd-supply = <&vcc_mipi>;
dvdd-supply = <&dvdd_1v2>;
port {
ucam_out0: endpoint {
remote-endpoint = <&mipi_in_ucam0>;
data-lanes = <1 2 3 4>;
};
};
&imx581 {
reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
pwdn-gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
status = "okay";
};
页:
[1]