RK3399 烧录官方的img后再烧录自己的内核起不来
下载使用的是Firefly-rk3399_xubuntu16.04_EC20_20180614.img烧录后发现起不来，然后在解包得到分区文件，烧录自己的内核，发现也是一样的现象，起不来，还请帮忙看看是哪里出了问题
DDR Version 1.07 20161103
In
Channel 0: DDR3, 666MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 666MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg = 0x32817281, stride = 0x9
OUT
Boot1: 2016-07-29, version: 1.05
CPUId = 0x0
ChipType = 10 1838
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
SdmmcInit=0 20
StorageInit ok = 62317
LoadTrustBL
No find bl30.bin
No find bl32.bin
theLoader 200000 77884
LoaderFlag2: 0x0
WARNING: plat_rockchip_comm_sram_init:code:ff8d9000, 67000, ef0
NOTICE:BL31: v1.2(debug):b995f80
NOTICE:BL31: Built : 16:53:56, Nov7 2016
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: boot cpu mask: 0
INFO: Vesion: 2016.0.01
INFO: plat_rockchip_pmu_init(1211): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.02-RK3399-06-ga7c7ca8 (Apr 25 2017 - 15:10:21)
CPU: rk3399
cpu version = 0
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 594000000HZ
aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
cpll = 800000000HZ
dpll = 660000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Board:Rockchip platform Board
Uboot as second level loader
DRAM:Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
128 MiB
SdmmcInit = 0 20
storage init OK!
Using default environment
GetParam
Load FDT from resource image.
no key node
usb bc: can find node by path: /dwc-control-usb/usb_bc
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=58
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 594000000HZ
aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
cpll = 800000000HZ
dpll = 660000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Can't find dts node for fuel guage cw201x
can't find dts node for ec-battery
Can't find dts node for charger bq25700
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2017-04-25#1.05
empty serial no.
normal boot.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts
no fuel gauge found
misc partition not found!
Hit any key to stop autoboot:0
load fdt from resouce.
Secure Boot state: 0
kernel @ 0x00280000 (0x01103008)
ramdisk@ 0x05bf0000 (0x00000000)
bootrk: do_bootm_linux...
Loading Device Tree to 0000000005600000, end 0000000005613645 ... OK
Add bank:0000000000200000, 000000007fe00000
WARNING: could not set reg FDT_ERR_BADOFFSET.
Starting kernel ...
<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.77 (harris@harris-System-Product-Name) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #3 SMP Fri Jun 15 18:38:1agemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2017-04-25_15:10:21
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] software IO TLB (64MB) vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8008ee0000 - 0xffffff8009000000 (1152 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008ae0000 ( 10624 KB)
[ 0.000000] .rodata : 0xffffff8008ae0000 - 0xffffff8008ee0000 (4096 KB)
[ 0.000000] .data : 0xffffff8009000000 - 0xffffff80091830nout to 64.
[ 0.000000]RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @794g01 }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_count.ng 41201 entries in 161 pages
[ 0.113983] sched-energy: Sched-energy-costs installed from DT
[ 0.114001] CPU0: update cpu_capacity 401
[ 0.114064] ASID allocator initialised with 65536 entries
[ 0.117283] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.117714] Platform MSI: /interrupt-controller@fee00000/interrupt-contro7[ 0.120224] Detected VIPT I-cache on CPU3
[ 0.120245] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.120278] CPU3: using LPI pending table @0x0000000079710000
[ 0.120306] CPU3: update cpu_capacity 401
[ 0.120309] CPU3: Booted secondary processor
[ 0.120838] Detected PIPT I-cache on CPU4
[ 0.120866] CPU4: found redistributor 100 recacity 1024
[ 0.121581] CPU5: Booted secondary processor
[ 0.121671] Brought up 6 CPUs
[ 0.121754] SMP: Total of 6 processors activated.
[ 0.121764] CPU features: detected feature: GIC system register CPU interface
[ 0.121776] CPU: All CPU(s) started at EL2
[ 0.121824] alternatives: patching kernel code
[ 0.123278] devtmpfs: initialized
[ fg governor ladder
[ 0.146134] cpuidle: using governor menu
[ 0.146157] Registered FIQ tty driver
[ 0.146359] vdso: 2 pages (1 code @ ffffff8008ae6000, 1 data @ ffffff8009004000)
[ 0.146389] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.146551] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.228562] console enabled
[ [ 0.244290] iommu: Adding device ff650000.vpu_service to group 0
[ 0.244909] iommu: Adding device ff660000.rkvdec to group 1
[ 0.245488] iommu: Adding device ff8f0000.vop to group 2
[ 0.246044] iommu: Adding device ff900000.vop to group 3
[ 0.247752] SCSI subsystem initialized
[ 0.248423] usbcore: registered new interface driver usbfs
[ 0.248947] usbcore: registered new interface driver hub
[ 0.249500] usbcore: registered new device driver usb
[ 0.250049] media: Linux media interface: v0.10
[ 0.250494] Linux video capture interface: v2.00
[ 0.250938] pps_core: LinuxPPS API ver. 1 registered
[ 0.251378] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.252198] PTP clock support registered
[ 0.253439] Advanced Linux Sound Architecture Driver Initialized.
[ 0.254469] Bluetooth: Core ver 2.21
[ 0.254812] NET: Registered protocol family 31
[ 0.255214] Bluetooth: HCI device and connection manager initialized
[ 0.255777] Bluetooth: HCI socket layer initialized
[ 0.256210] Bluetooth: L2CAP socket layer initialized
[ 0.256685] Bluetooth: SCO socket layer initialized
[ 0.257725] rockchip-cpuinfo cpuinfo: Serial : 5dfb38448dc2d689
[ 0.258707] clocksource: Switched to clocksource arch_sys_counter
[ 0.306798] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.307721] NET: Registered protocol family 2
[ 0.308540] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.309307] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.310272] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.310929] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.311517] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.312335] NET: Registered protocol family 1
[ 0.313024] RPC: Registered named UNIX socket transport module.
[ 0.313548] RPC: Registered udp transport module.
[ 0.313980] RPC: Registered tcp transport module.
[ 0.314396] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.315525] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.316355] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.320151] Initialise system trusted keyring
[ 0.328728] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.330995] NFS: Registering the id_resolver key type
[ 0.331466] Key type id_resolver registered
[ 0.331846] Key type id_legacy registered
[ 0.332218] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.333514] fuse init (API version 7.23)
[ 0.334361] SGI XFS with security attributes, no debug enabled
[ 0.340261] NET: Registered protocol family 38
[ 0.340671] Key type asymmetric registered
[ 0.341056] Asymmetric key parser 'x509' registered
[ 0.341643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.342319] io scheduler noop registered
[ 0.342670] io scheduler deadline registered
[ 0.343187] io scheduler cfq registered (default)
[ 0.344875] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
[ 0.346779] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
[ 0.351718] backlight supply power not found, using dummy regulator
[ 0.352883] rk-vcodec ff650000.vpu_service: probe device
[ 0.353394] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc078d9a010
[ 0.354161] rk-vcodec ff650000.vpu_service: allocator is drm
[ 0.354726] rk-vcodec ff650000.vpu_service: checking hw id 0
[ 0.355670] rk-vcodec ff650000.vpu_service: init success
[ 0.356752] rk-vcodec ff660000.rkvdec: probe device
[ 0.357218] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc078d9a810
[ 0.357914] rk-vcodec ff660000.rkvdec: allocator is drm
[ 0.358425] rk-vcodec ff660000.rkvdec: checking hw id 6876
[ 0.359220] rk-vcodec ff660000.rkvdec: init success
[ 0.360954] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.361624] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.363878] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.364546] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.366310] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.368346] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[ 0.369750] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.371126] ff370000.serial: ttyS1 at MMIO 0xff370000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.372775] Initialized drm 1.1.0 20060810
[ 0.376185] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008b81308)
[ 0.377117] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008b81308)
[ 0.378069] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 0.378659] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 0.379405] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 0.380835] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008b7c3a8)
[ 0.381551] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.382275] No driver support for vblank timestamp query.
[ 0.383029] rockchip-drm display-subsystem: failed to parse loader memory
[ 0.383640] rockchip-drm display-subsystem: No connectors reported connected with modes
[ 0.384382] Cannot find any crtc or sizes - going 1024x768
[ 0.396720] Console: switching to colour frame buffer device 128x48
[ 0.404459] rockchip-drm display-subsystem: fb0:frame buffer device
[ 0.412072] mali ff9a0000.gpu: Failed to get regulator
[ 0.412527] mali ff9a0000.gpu: Power control initialization failed
[ 0.413165] platform ff9a0000.gpu: Driver mali requests probe deferral
[ 0.413986] Unable to detect cache hierarchy from DT for CPU 0
[ 0.415224] brd: module loaded
[ 0.420514] loop: module loaded
[ 0.421341] zram: Added device: zram0
[ 0.421936] lkdtm: No crash points registered, enable through debugfs
[ 0.423261] register spi return v = :0
[ 0.423615] tun: Universal TUN/TAP device driver, 1.6
[ 0.424083] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.425901] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.426523] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 0.427037] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
[ 0.427723] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.428260] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.433878] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 0.434329]Ring mode enabled
[ 0.434605]DMA HW capability register supported
[ 0.435016]Normal descriptors
[ 0.435326]RX Checksum Offload Engine supported (type 2)
[ 0.435817]TX Checksum insertion supported
[ 0.436197]Wake-Up On Lan supported
[ 0.436560]Enable RX Mitigation via HW Watchdog Timer
[ 0.501407] libphy: stmmac: probed
[ 0.501729] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 0.502300] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 0.503735] PPP generic driver version 2.4.2
[ 0.504348] usbcore: registered new interface driver rndis_wlan
[ 0.505248] Rockchip WiFi SYS interface (V1.00) ...
[ 0.505772] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.506498] usbcore: registered new interface driver pegasus
[ 0.507108] usbcore: registered new interface driver rtl8150
[ 0.507647] usbcore: registered new interface driver r8152
[ 0.508195] usbcore: registered new interface driver asix
[ 0.508720] usbcore: registered new interface driver ax88179_178a
[ 0.509289] usbcore: registered new interface driver cdc_ether
[ 0.509873] usbcore: registered new interface driver dm9601
[ 0.510417] usbcore: registered new interface driver smsc75xx
[ 0.510987] usbcore: registered new interface driver smsc95x[ 0.511531] usbcore: registered new interface driver net1080
[ 0.512079] usbcore: registered new interface driver rndis_host
[ 0.512635] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 0.513379] usbcore: registered new interface driver cdc_ncm
[ 0.513929] usbcore: registered new interface driver qmi_wwan
[ 0.514472] usbcore: registered [ 0.521447] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd
[ 0.523052] platform usb@fe800000: Driver rockchip-dwc3 requests probe deferral
[ 0.529066] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[ 0.529891] platform usb@fe900000: Driver rockchip-dwc3 requests probe deferral
[ 0.531268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.531863] ehci-pci: EHCI PCI platform driver
[ 0.532309] ehci-platform: EHCI generic platform driver
[ 0.536450] ehci-platform fe380000.usb: EHCI Host Controller
[ 0.537100] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 0.537912] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
[ 0.543731] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.544430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.545040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.545682] usb usb1: Product: EHCI Host Controller
[ 0.546122] usb usb1: Manufacturer: Linux 4.4.77 ehci_hcd
[ 0.546599] usb usb1: SerialNumber: fe380000.usb
[ 0.547452] hub 1-0:1.0: USB hub found
[ 0.547839] hub 1-0:1.0: 1 port detected
[ 0.551733] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.552374] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 0.553163] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
[ 0.559728] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.560410] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.561020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.561662] usb usb2: Product: EHCI Host Controller
[ 0.562100] usb usb2: Manufacturer: Linux 4.4.77 ehci_hcd
[ 0.562577] usb usb2: SerialNumber: fe3c0000.u[ 0.564615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.565190] ohci-platform: OHCI generic platform driver
[ 0.565961] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.566717] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 0.567501] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
[ 0.622860] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.623458] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.624111] usb usb3: Product: Generic Platform OHCI controller
[ 0.624635] usb usb3: Manufacturer: Linux 4.4.77 ohci_hcd
[ 0.625118] usb usb3: SerialNumber: fe3a0000.usb
[ 0.625942] hub 3-0:1.0: USB hub found
[[ 0.628713] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
[ 0.683861] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.684458] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.685110] usb usb4: Product: Generic Platform OHCI controller
[ 0.685634] usb usb4: Manufacturer: Linux 4.4.77 ohci_hcd
[ 0.686118] usb usb4: SerialNumber: fe3e0000.usb
[ 0.686943] hub 4-0:1.0: USB hub found
[ 0.688469] usbcore: registered new interface driver cdc_acm
[ 0.688984] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.689737] usbcore: registered new interface driver cdc_wdm
[ 0.690280] usbcore: registered new interface driver uas
[ 0.690890] usbcore: registered new interface driver usb-storage
[ 0.691497] usbcore: registereistered for Keyspan 1 port adapter
[ 0.697587] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 0.698261] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 0.698953] usbcore: registered new interface driver option
[ 0.699461] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.700262] usbcore: registered nert registered for pl2303
[ 0.702459] usbcore: registered new interface driver qcserial
[ 0.703004] usbserial: USB Serial support registered for Qualcomm USB modem
[ 0.703673] usbcore: registered new interface driver sierra
[ 0.704202] usbserial: USB Serial support registered for Sierra USB modem
[ 0.705557] usbcore: registered new interface driver iforce
[ 0.hscreen
[ 0.708421] i2c /dev entries driver
[ 0.709958] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[ 0.710642] fan53555-reg: supplied by vcc5v0_sys
[ 0.712825] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[ 0.713474] fan53555-reg: supplied by vcc5v0_sys
[ 0.715762] rk808 0-001b: Pmic Chip id: 0x0
[ 0.719576] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.720192] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.720824] DCDC_REG1: supplied by vcc3v3_sys
[ 0.721933] DCDC_REG2: supplied by vcc3v3_sys
[ 0.722870] DCDC_REG3: supplied by vcc3v3_sys
[ 0.723504] DCDC_REG4: supplied by vcc3v3_sys
[ 0.724319] LDO_REG1: supplied by vcc3v3_sys
[ 0.725819] LDO_REG2: supplied by vcc3v3_sys
[ 0.727130] LDO_REG3: supplied by vcc3v3_sys
[ 0.728451] LDO_REG4: supplied by vcc3v3_sys
[ 0.729802] LDO_REG5: supplied by vcc3v3_sys
[ 0.731117] LDO_REG6: supplied by vcc3v3_sys
[ 0.732427] LDO_REG7: supplied by vcc3v3_sys
[ 0.733778] LDO_REG8: supplied by vcc3v3_sys
[ 0.735089] SWITCH_REG1: supplied by vcc3v3_sys
[ 0.735755] SWITCH_REG2: supplied by vcc3v3_sys
[ 0.739610] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 0.740633] rk808 0-001b: Can not read property pmic,hold-gpio
[ 0.741168] rk808 0-001b: Can not read property pmic,stby-gpio
[ 0.741713] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80093fc000
[ 0.742985] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80093fe000
[ 0.743727] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
[ 0.744656] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
[ 0.745251] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xferon device rockchip-pinctrl
[ 0.746234] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
[ 0.747228] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff8009442000
[ 0.748382] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009444000
[ 0.749951] IR NEC protocol handler initialized
[ 0.750360] IR RC5(x/sz) protocol handler initialized
[ 0.750824] IR RC6 protocol handler initialized
[ 0.751231] IR JVC protocol handler initialized
[ 0.751639] IR Sony protocol handler initialized
[ 0.752055] IR SANYO protocol handler initialized
[ 0.752475] IR Sharp protocol handler initialized
[ 0.752903] IR MCE Keyboard/mouse protocol handler initialized
[ 0.753417] IR XMP protocol handler initialized
[ 0.754244terface driver uvcvideo
[ 0.756340] USB Video Class driver (1.1.1)
[ 0.758928] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 0.760768] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.761686] Bluetooth: Virtual HCI driver ver 1.5
[ 0.762241] Bluetooth: HCI UART driver ver 2.3
[ 0.762636] Bluetooth: HCI UART protocol H4 registered
[ 0.763100] Bluetooth: HCI UART protocol LL registered
[ 0.763552] Bluetooth: HCI UART protocol ATH3K registered
[ 0.764101] usbcore: registered new interface driver bfusb
[ 0.764642] usbcore: registered new interface driver btusb
[ 0.765518] cpu cpu0: leakage=22
[ 0.765993] cpu cpu4: leakage=39
[ 0.769900] sdhci: Secure Digital Host Controller Interface driver
[ 0.770447] sdhci: Copyright(c) Pierre Ossman
[ 0.770857] Synopsys Designware Multimedia Card Interface Driver
[ 0.772232] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.772922] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 0.773524] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 0.774083] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 0.774958] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 0.775786] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[ 0.776582] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[ 0.777382] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[ 0.788778] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.799787] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 0.800562] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.802786] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 0.803321] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 0.829727] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[ 0.830864] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.832113] usbcore: registered new interface driver usbhid
[ 0.832612] usbhid: USB HID core driver
[ 0.834827] usbcore: registered new interface driver snd-usb-audio
[ 0.837222] platform es8316-sound: Driver asoc-simple-card requests probe deferral
[ 0.838014] platform hdmi-codec: Driver asoc-simple-card requests probe deferral
[ 0.840486] u32 classifier
[ 0.840775] Netfilter messages via NETLINK v0.30.
[ 0.841255] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.842114] ctnetlink v0.93: registering with nfnetlink.
[ 0.842753] ip_set: protocol 6
[ 0.843037] IPVS: Registered protocols ()
[ 0.843553] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 0.844324] IPVS: Creating netns size=1592 id=0
[ 0.844783] IPVS: ipvs loaded.
[ 0.845393] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.846064] Initializing XFRM netlink socket
[ 0.847140] NET: Registered protocol family 10
[ 0.848434] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.849110] sit: IPv6 over IPv4 tunneling driver
[ 0.850058] NET: Registered protocol family 17
[ 0.850470] NET: Registered protocol family 15
[ 0.850906] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.852046] Bridge foth: RFCOMM ver 1.11
[ 0.853358] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.853896] Bluetooth: HIDP socket layer initialized
[ 0.854385] 8021q: 802.1Q VLAN Support v1.8
[ 0.854786] lib80211: common routines for IEEE802.11 drivers
[ 0.855328] : Enter rfkill_wlan_init
[ 0.856009] : Enter rfkill_wlan_probe
[ 0.856487] [: enable wifi power control.
[ 0.857780] : wlan_platdata_parse_dt: wifi power controled by gpio.
[ 0.858468] : wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 149, flags = 0.
[ 0.859289] : rfkill_wlan_probe: init gpio
[ 0.859779] : Exit rfkill_wlan_probe
[ 0.860229] : Enter rfkill_rk_init
[mulation handler
[ 0.861984] Registered setend emulation handler
[ 0.862909] Loading compiled-in X.509 certificates
[ 0.864617] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 0.865773] I : : drivers/gpu/arm/midgard_for_linux/backend/gpu/mali_kbase_devfreq.c; : 271; : kbase_devfreq_init(); success initing power_model_simple.
[ 0.867262] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 0.868353] mali ff9a0000.gpu: Probed as mali0
[ 0.874989] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[ 0.875072] mmc1: MAN_BKOPS_EN bit is not set
[ 0.876404] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 5
[ 0.877372] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 0.878258] xhci-hcd xhci-hcd.6.auto: irq 226, io mem 0xfe800000
[ 0.879186] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.879831] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880480] usb usb5: Product: xHCI Host Controller
[ 0.880950] usb usb5: Manufacturer: Linux 4.4.77 xhci-hcd
[ 0.881443] usb usb5: SerialNumber: xhci-hcd.6.auto
[ 0.883028] hub 5-0:1.0: USB hub found
[ 0.883437] hub 5-0:1.0: 1 port detected
[ 0.884662] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[ 0.885522] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 6
[ 0.886264] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.886656] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 0.887019] mmcblk1: mmc1:0001 AJNB4R 14.6 GiB
[ 0.887208] mmcblk1boot0: mmc1:0001 AJNB4R partition 1 4.00 MiB
[ 0.887404] mmcblk1boot1: mmc1:0001 AJNB4R partition 2 4.00 MiB
[ 0.887580] mmcblk1rpmb: mmc1:0001 AJNB4R partition 3 4.00 MiB
[ 0.887893] uboot: 0x000400000 -- 0x000800000 (4 MB)
[ 0.887897] trust: 0x000800000 -- 0x000c00000 (4 MB)
[ 0.887900] resource: 0x000c00000 -- 0x001c00000 (16 MB)
[ 0.887903] kernel: 0x001c00000 -- 0x003000000 (20 MB)
[ 0.887906] backup: 0x003000000 -- 0x003400000 (4 MB)
[ 0.887909] boot: 0x003400000 -- 0x3a3a00000 (14854 MB)
[ 0.892474]mmcblk1: p1 p2 p3 p4 p5 p6
[ 0.892474] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.893427] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.894072] usb usb6: Product: xHCI Host Controller
[ 0.894509] usb usb6: Manufacturer: Linux 4.4.77 xhci-hcd
[ 0.894988] usb usb6: SerialNumber: xhci-hcd.6.auto
[ 0.895839] hub 6-0:1.0: USB hub found
[ 0.896190] hub 6-0:1.0: 1 port detected
[ 0.897566] xhci-hcd xhci-hcd.6.auto: remove, state 1
[ 0.898042] usb usb6: USB disconnect, device number 1
[ 0.922201] xhci-hcd xhci-hcd.6.auto: Host not halted after 16000 microseconds.
[ 0.922849] xhci-hcd xhci-hcd.6.auto: Host controller not halted, aborting reset.
[ 0.923533] xhci-hcd xhci-hcd.6.auto: USB bus 6 deregistered
[ 0.924430] xhci-hcd xhci-hcd.6.auto: remove, state 1
[ 0.924931] usb usb5: USB disconnect, device number 1
[ 0.925919] xhci-hcd xhci-hcd.6.auto: USB bus 5 deregistered
[ 0.931811] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 0.932417] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 5
[ 0.933222] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 0.934025] xhci-hcd xhci-hcd.7.auto: irq 227, io mem 0xfe900000
[ 0.934646] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.935255] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.935896] usb usb5: Product: xHCI Host Controller
[ 0.936332] usb usb5: Manufacturer: Linux 4.4.77 xhci-hcd
[ 0.936809] usb usb5: SerialNumber: xhci-hcd.7.auto
[ 0.937549] hub 5-0:1.0: USB hub found
[ 0.937906] hub 5-0:1.0: 1 port detected
[ 0.938457] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 0.939041] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 6
[ 0.939755] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.940518] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.941125] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.941764] usb usb6: Product: xHCI Host Controller
[ 0.942200] usb usb6: Manufacturer: Linux 4.4.77 xhci-hcd
[ 0.942671] usb usb6: SerialNumber: xhci-hcd.7.auto
[ 0.943404] hub 6-0:1.0: USB hub found
[ 0.943765] hub 6-0:1.0: 1 port detected
[ 0.987380] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[ 0.987984] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 0.988608] usb 2-1: Product: USB 2.0 Hub
[ 0.989466] hub 2-1:1.0: USB hub found
[ 0.990005] hub 2-1:1.0: 4 ports detected
[ 1.066165] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff880000.i2s mapping ok
[ 1.066890] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1
[ 1.067580] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
[ 1.068409] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P
[ 1.069075] asoc-sim[ 1.076680] asoc-simple-card hdmi-codec: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 1.079614] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.081613] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:02 UTC (1358499002)
u 1.106853]
下面也没有任何的打印了 没看到出错信息 zhuihai 发表于 2018-6-19 17:08
没看到出错信息
最后卡在了 Started D-Bus System Message Bus.这句。没有任何反应 DDR Version 1.12 20180518
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg = 0x32817281, stride = 0x9
OUT
Boot1: 2018-04-08, version: 1.12
CPUId = 0x0
ChipType = 0x10, 215
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
SdmmcInit=0 1
StorageInit ok = 67057
LoadTrustBL
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xa77a0
RunBL31 0x10000
NOTICE:BL31: v1.3(debug):d98d16e
NOTICE:BL31: Built : 15:03:07, May 10 2018
NOTICE:BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1151): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF TEE-CORE:init_primary_helper:337: Initializing (1.1.0-170-gc4654a6 #16 Wed May 30 08:54:30 UTC 2018 aarch64)
INF TEE-CORE:init_primary_helper:338: Release version: 1.2
INF TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-01617-g9c629953c6-dirty (Jun 13 2018 - 11:37:40 +0800)
Model: Firefly-RK3399 Board
DRAM:2 GiB
Relocation Offset is: 7fd18000
PMIC:RK808
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
*** Warning - bad CRC, using default environment
In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: Firefly-RK3399 Board
Card did not respond to voltage select!
mmc_init: -95, time 10
switch to partitions #0, OK
mmc0(part 0) is current device
boot mode: None
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot:0
ANDROID: reboot reason: "(none)"
FDT load addr 0x10f00000 size 257 KiB
Booting kernel at 0x207f800 with fdt at 31d3800...
## Booting Android Image at 0x0207f800 ...
Kernel load addr 0x02080000 size 17739 KiB
## Flattened Device Tree blob at 031d3800
Booting using the fdt blob at 0x31d3800
XIP Kernel Image ... OK
Loading Device Tree to 00000000081eb000, end 00000000081ff56f ... OK
Adding bank: star0200000, size=0x08200000
Adding bank: start=0x0a200000, size=0x75e00000
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.132 (harris@harris-System-Product-Name) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #36 SMP Tue Jun 19 10:30:39 CST 2018
[ 0.000000] Boot CPU: AArch64 Processor
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole enabled
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fefe000 s45800 r8192 d32024 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU featu00-0x7fdf4000] (0MB) mapped at
[ 0.000000] Memory: 2008616K/2064384K available (10814K kernel code, 1674K rwdata, 4128K rodata, 1088K init, 733K bss, 55768K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] - 0xffffff8008b10000 ( 10816 KB)
[ 0.000000] .rodata : 0xffffff8008b10000 - 0xffffff8008f20000 (4160 KB)
[ 0.000000] .data : 0xffffff8009030000 - 0xffffff80091d2808 (1675 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)MB)
[ 0.000000] memory: 0xffffffc000200000 - 0xffffffc080000000 (2046 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000]Build-time adjustment of leaf fanout to 64.
[ 0.000000]RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry fo[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @a300000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a290000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a2a0000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0 { /cpus/cpu@0 /cpus/cpu@1 /cpus/cpu@2 /cpus/cpu@3 }
[ 0.000000] GIC: PPI partition interrupt-partition-1 { /cpus/cpu@100 /cpus/cpu@101 }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001924] Console: colour dummy device 80x25
[ 0.002355] Calibrating delay loop (skipped), vantries: 4096 (order: 3, 32768 bytes)
[ 0.005912] Initializing cgroup subsys devices
[ 0.006337] Initializing cgroup subsys freezer
[ 0.006782] ftrace: allocating 40285 entries in 158 pages
[ 0.106282] sched-energy: Sched-energy-costs installed from DT
[ 0.106835] CPU0: update cpu_capacity 401
[ 0.107272] ASID allocator initialised with 32768 entries
[ 0.110869] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.112117] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.114202] Detected VIPT I-cache on CPU1
[ 0.114235] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.114265] CPU1: using LPI pending table @0x0000000000310000
[ 0.114309] CPU1: update cpu_capacity 401
[ 0.114312] CPU1: Booted secondary processor
[ 0.114828] Detected VIPT I-cache on CPU2
[ 0.114850] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.114878] CPU2: using LPI pending table @0x0000000000340000
[ 0.114905] CPU2: update cpu_capacity 401
[ 0.114909] CPU2: Booted secondary processor
[ 0.115420] Detected VIPT I-cache on CPU3
[ 0.115441] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.115469] CPU3: using LPI pending table @0x0000000000390000
[ 0.115495] CPU3: update cpu_capacity 401
[ 0.115498] CPU3: Booted secondary processor
[ 0.116003] Detected PIPT I-cache on CPU4
[ 0.116029] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.116069] CPU4: using LPI pending table @0x00000000003c0000
[ pacity 1024
[ 0.116111] CPU4: Booted secondary processor
[ 0.116634] Detected PIPT I-cache on CPU5
[ 0.116653] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.116689] CPU5: using LPI pending table @0x00000000003f0000
[ 0.116716] CPU5: update cpu_capacity 1024
[ 0.116720] CPU5: Booted secondary processor
[ 0.116806] Br]pfs: initialized
[ 0.145787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.146763] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.147822] pinctrl core: initialized pinctrl subsystem
[ 0.149073] NET: Registered protocol family 16
[ 0.153808] cpuidle: using governor ladder
[ 0.157817] cpuidle: using governor menu
[ 0.158213] Registered FIQ tty driver
[ 0.158863] vdso: 2 pages (1 code @ ffffff8008b16000, 1 data @ ffffff8009034000)
[ 0.159607] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.160433] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.182360] console enabled
[ 0.182360] console enabled
[ 0.183053] bootconsole disabled
[ 0.183053] bootconsole disabled
[ 0.183959] Registered fiq debugger ttyFIQ0
[ 0.209785] iommu: Adding device ff650000.vpu_service to group 0
[ 0.210384] iommu: Adding device ff660000.rkvdec to group 1
[ 0.210981] iommu: Adding device ff8f0000.vop to group 2
[ 0.211527] iommu: Adding device ff900000.vop to group 3
[ 0.213302] SCSI subsystem initialized
[ 0.213798] usbcore: registered new interface driver usbfs
[ 0.214333] usbcore: registered new interface driver hub
[ 0.214881] usbcore: registered new device driver usb
[ 0.215398] media: Linux media interface: v0.10
[ 0.215833] Linux video capture interface: v2.00
[ 0.216281] pps_core: LinuxPPS API ver. 1 registered
[ 0.216731] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.217547] PTP clock support registered
[ 0.218818] Advanced Linux Sound Architecture Driver Initialized.
[ 0.219826] Bluetooth: Core ver 2.21
[ 0.220181] NET: Registered protocol family 31
[ 0.220586] Bluetooth: HCI device and connection manager initialized
[ 0.221150] Bluetooth: HCI socket layer initialized
[ 0.221589] Bluetooth: L2CAP socket layer initialized
[ 0.222059] Bluetooth: SCO socket layer initialized
[ 0.223528] clocksource: Switched to clocksource arch_sys_counter
[ 0.271334] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.272254] NET: Registered protocol family 2
[ 0.273083] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.273830] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.274814] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.275472] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.276076] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.276889] NET: Registered protocol family 1
[ 0.277597] RPC: Registered named UNIX socket transport module.
[ 0.278121] RPC: Registered udp transport module.
[ 0.278549] RPC: Registered tcp transport module.
[ 0.278966] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.280501] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.281338] hw perfevents: enabled wit[ 0.285040] Initialise system trusted keyring
[ 0.293178] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.294463] NFS: Registering the id_resolver key type
[ 0.294955] Key type id_resolver registered
[ 0.295327] Key type id_legacy registered
[ 0.295756] fuse init (API version 7.23)
[ 0.296465] SGI XFS with security attributes, no debug enabled
[ 0.301715] NET: Registered protocol family 38
[ 0.302131] Key type asymmetric registered
[ 0.302507] Asymmetric key parser 'x509' registered
[ 0.303104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.303785] io scheduler noop registered
[ 0.304139] io scheduler deadline registered
[ 0.304652] io scheduler cfq registered (default)
[ 0.306320] phy phy-ff770000.syscon:usb2-phy@e450.0: Failed to get VBUS supply regulator
[ 0.308245] phy phy-ff770000.syscon:usb2-phy@e460.2: Failed to get VBUS supply regulator
[ 0.313309] backlight supply power not found, using dummy regulator
[ 0.314323] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 0.315109] rk-vcodec ff650000.vpu_service: probe device
[ 0.315639] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc07d222010
[ 0.316393] rk-vcodec ff650000.vpu_service: allocator is drm
[ 0.316957] rk-vcodec ff650000.vpu_service: checking hw id 0
[ 0.317948] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 0.318583] rk-vcodec ff650000.vpu_service: init success
[ 0.319278] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 0.320177] rk-vcodec ff660000.rkvdec: probe device
[ 0.320653] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc07d222810
[ 0.321345] rk-vcodec ff660000.rkvdec: allocator is drm
[ 0.321870] rk-vcodec ff660000.rkvdec: checking hw id 6876
[ 0.322697] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 0.323269] rk-vcodec ff660000.rkvdec: init success
[ 0.325071] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.325753] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.328001] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.328682] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.330530] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 0.332738] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 34, base_baud = 1500000) is a 16550A
[ 0.334148] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.335843] Initialized drm 1.1.0 20060810
[ 0.339089] Rockchip DRM driver version: v1.0.1
[ 0.339853] rockchip-drm display-subsystem: defer getting devfreq
[ 0.340679] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 0.341487] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008bad768)
[ 0.342236] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 0.342973] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008bad768)
[ 0.343743] *ERROR* failed to find panel
[ 0.344272] rockchip-drm display-subsystem: failed to bind ff970000.edp (ops 0xffffff8008ba62e0): -517
[ 0.345341] rockchip-drm display-subsystem: master bind failed: -517
[ 0.346985] ________ panel_simple_probe _______ start ____
[ 0.347660] ________ panel_simple_probe _______ over ____
[ 0.348642] mali ff9a0000.gpu: Failed to get regulator
[ 0.349096] mali ff9a0000.gpu: Power control initialization failed
[ 0.349952] Unable to detect cache hierarchy for CPU 0
[ 0.351137] brd: module loaded
[ 0.356400] loop: module loaded
[ 0.357230] zram: Added device: zram0
[ 0.357836] lkdtm: No crash points registered, enable through debugfs
[ 0.360083] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.360724] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 0.361226] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 0.361749] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 0.362444] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 0.363070] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.368620] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.369216] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 0.369678]Ring mode enabled
[ 0.369954]DMA HW capability register supported
[ 0.370358]Normal descriptors
[ 0.370676]RX Checksum Offload Engine supported (type 2)
[ 0.371162]TX Checksum insertion supported
[ 0.371549]Wake-Up On Lan supported
[ 0.371905]Enable RX Mitigation via HW Watchdog Timer
[ 0.436822] libphy: stmmac: probed
[ 0.437126] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 0.437707] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 0.439287] usbcore: registered new interface driver rndis_wlan
[ 0.440099] Rockchip WiFi SYS interface (V1.00) ...
[ 0.440618] usbcore: registered new interface driver rtl8150
[ 0.441147] uectel_WCDMA<E_Linux&Android_GobiNet_Driver_V1.3.0
[ 0.445614] usbcore: registered new interface driver GobiNet
[ 0.452783] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd
[ 0.676941] phy phy-ff770000.syscon:usb2-phy@e450.0: charger = USB_SDP_CHARGER
[ 0.683192] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[ 0.685447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.686057] ehci-pci: EHCI PCI platform driver
[ 0.686503] ehci-platform: EHCI generic platform driver
[ 0.690611] ehci-platform fe380000.usb: EHCI Ho[ 0.698546] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.699244] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.699856] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.700499] usb usb1: Product: EHCI Host Controller
[ 0.700940] usb usb1: Manufacturer: Linux 4.4.132 ehci_hcd
[ 0.701428] usb usb1: SerialNumber: fe380000.usb
[ 0.702301] hub 1-0:1.0: USB hub found
[ 0.702675] hub 1-0:1.0: 1 port detected
[ 0.706900] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.707606] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 0.708440] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
[ 0.714563] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.715375] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.716000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.716657] usb usb2: Product: EHCI Host Controller
[ 0.717099] usb usb2: Manufacturer: Linux 4.4.132 ehci_hcd
[ 0.717600] usb usb2: SerialNumber: fe3c0000.usb
[ 0.718684] hub 2-0:1.0: USB hub found
[ 0.719054] hub 2-0:1.0: 1 port detected
[ 0.720168] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.720747] ohci-platform: OHCI generic platform driver
[ 0.721709] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.722504] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 0.723322] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
[ 0.778712] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.779314] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.779970] usb usb3: Product: Generic Platform OHCI controller
[ 0.780496] usb usb3: Manufacturer: Linux 4.4.132 ohci_hcd
[ 0.780994] usb usb3: SerialNumber: fe3a0000.usb
[ 0.782002] hub 3-0:1.0: USB hub found
[ 0.782372] hub 3-0:1.0: 1 port detected
[ 0.783601] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.784432] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 0.785237] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
[ 0.840686] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.841286] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.841941] usb usb4: Product: Generic Platform OHCI controller
[ 0.842465] usb usb4: Manufacturer: Linux 4.4.132 ohci_hcd
[ 0.842963] usb usb4: SerialNumber: fe3e0000.usb
[ 0.843912] hub 4-0:1.0: USB hub found
[ 0.844280] hub 4-0:1.0: 1 port detected
[ 0.845935] usbcore: registered new interface driver cdc_acm
[ 0.846434] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.847209] usbcore: registered new interface driver cdc_wdm
[ 0.847778] usbcore: registered new interface driver uas
[ 0.848404] usbcore: registered new interface driver usb-storage
[ 0.849048] usbcore: registered new interface driver usbserial
[ 0.849632] usbcore: registered new interface driver usbserial_generic
[ 0.850243] usbserial: USB Serial support registered for generic
[ 0.850839] usbcore: registered new interface driver cp210x
[ 0.851369] usbserial: USB Serial support registered for cp210x
[ 0.852015] usbcore: registered new interface driver ftdi_sio
[ 0.852627] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.853535] usbcore: registered new interface driver keyspan
[ 0.854069] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 0.854798] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 0.855476] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 0.856169] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 0.856886] usbcore: registered new interface dr0.860646] usbcore: registered new interface driver qcserial
[ 0.861185] usbserial: USB Serial support registered for Qualcomm USB modem
[ 0.861895] usbcore: registered new interface driver sierra
[ 0.862423] usbserial: USB Serial support registered for Sierra USB modem
[ 0.864319] usbcore: registered new interface driver usbtouchscreen
[ 0.865642] i2c /dev entr[ 0.867486] fan53555-regulator 0-0040: FAN53555 Option Rev Detected!
[ 0.868245] fan53555-reg: supplied by vcc5v0_sys
[ 0.871201] fan53555-regulator 0-0041: FAN53555 Option Rev Detected!
[ 0.871911] fan53555-reg: supplied by vcc5v0_sys
[ 0.875419] rk808 0-001b: Pmic Chip id: 0x0
[ 0.879643] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.880253] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.880940] DCDC_REG1: supplied by vcc5v0_sys
[ 0.882255] DCDC_REG2: supplied by vcc5v0_sys
[ 0.883398] DCDC_REG3: supplied by vcc5v0_sys
[ 0.884226] DCDC_REG4: supplied by vcc5v0_sys
[ 0.885231] LDO_REG1: supplied by vcc5v0_sys
[ 0.886884] LDO_REG2: supplied by vcc5v0_sys
[ 0.887484] vcca1v8_hdmi: Bringing 3000000uV into 1800000-1800000uV
[ 0.889103] LDO_REG3: supplied by vcc5v0_sys
[ 0.890663] LDO_REG4: supplied by vcc5v0_sys
[ 0.892179] LDO_REG5: supplied by vcc5v0_sys
[ 0.893734] LDO_REG6: supplied by vcc5v0_sys
[ 0.895262] LDO_REG7: supplied by vcc5v0_sys
[ 0.895855] vcca0v9_hdmi: Bringing 1800000uV into 900000-900000uV
[ 0.897471] LDO_REG8: supplied by vcc5v0_sys
[ 0.898086] vcc_3v3: Bringing 3000000uV into 3300000-3300000uV
[ 0.899697] SWITCH_REG1: supplied by vcc3v3_sys
[ 0.900558] SWITCH_REG2: supplied by vcc3v3_sys
[ 0.904704] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 0.905724] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094cc000
[ 0.907003] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094ce000
[ 0.908154] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094d0000
[ 0.909943] IR NEC protocol handler initialized
[ 0.910713] usbcore: registered new interface driver uvcvideo
[ 0.911224] USB Video Class driver (1.1.1)
[ 0.913948] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 0.914885] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[ 0.916117] Bluetooth: Virtual HCI driver ver 1.5
[ 0.916656] Bluetooth: HCI UART driver ver 2.3
[ 0.917051] Bluetooth: HCI UART protocol H4 registered
[ 0.917504] Bluetooth: HCI UART protocol LL registered
[ 0.917969] Bluetooth: HCI UART protocol ATH3K registered
[ 0.918505] usbcore: registered new interface driver bfusb
[ 0.919061] usbcore: registered new interface driver btusb
[ 0.919595] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
[ 0.920142] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
[ 0.920791] rtk_btusb: Register usb char device interface for BT driver
[ 0.921578] usbcore: registered new interface driver rtk_btusb
[ 0.922493] cpu cpu0: leakage=22
[ 0.923922] cpu cpu4: leakage=39
[ 0.928967] sdhci: Secure Digital Host Controller Interface driver
[ 0.929526] sdhci: Copyright(c) Pierre Ossman
[ 0.929923] Synopsys Designware Multimedia Card Interface Driver
[ 0.931272] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.931962] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 0.932576] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 0.933127] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 0.934004] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 0.934825] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[ 0.935624] vcc_sd: unsupportable voltage range: 3300000-3000000uV
[ 0.936181] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 0.936851] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 0.947595] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.958610] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 0.959413] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.961652] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 0.962187] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 0.989605] mmc1: SDHCI controller on fe330000.sdhci using ADMA
[ 0.991195] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.992423] usbcore: registered new interface driver usbhid
[ 0.992946] usbhid: USB HID core driver
[ 0.994342] rockchip-dmc dmc: Cannot get the regulator "center"
[ 0.998098] usbcore: registered new interface driver snd-usb-audio
[ 1.003298] Initializing XFRM netlink socket
[ 1.004341] NET: Registered protocol family 10
[ 1.006041] NET: Registered protocol family 17
[ 1.006456] NET: Registered protocol family 15
[ 1.007157] Bluetooth: RFCOMM socket layer initialized
[ 1.007643] Bluetooth: RFCOMM ver 1.11
[ 1.007991] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.008532] Bluetooth: HIDP socket layer initialized
[ 1.009027] : Enter rfkill_wlan_init
[ 1.009680] : Enter rfkill_wlan_probe
[ 1.010140] : wlan_platdata_parse_dt: wifi_chip_type = rtl8723bu
[ 1.010779] : wlan_platdata_parse_dt: enable wifi power control.
[ 1.011409] : wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.012115] : wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 149, flags = 0.
[ 1.012945] : rfkill_wlan_probe: init gpio
[ 1.013439] : Exit rfkill_wlan_probe
[ 1.013906] : Enter rfkill_rk_init
[ 1.014457] Key type dns_resolver registered
[ 1.016069] Registered cp15_barrier emulation handler
[ 1.016651] Registered setend emulation handler
[ 1.018245] Loading compiled-in X.509 certificates
[ 1.019368] Rockchip DRM driver version: v1.0.1
[ 1.020211] rockchip-drm display-subsystem: defer getting devfreq
[ 1.021082] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 1.021893] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008bad768)
[ 1.022648] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 1.023364] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008bad768)
[ 1.024270] rockchip-dp ff970000.edp: failed to get vcc regulator: -19
[ 1.024855] rockchip-dp ff970000.edp: failed to get vccio regulator: -19
[ 1.025508] rockchip-dp ff970000.edp: no DP phy configured
[ 1.026069] _____ panel_simple_prepare ___
[ 1.026466] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 1.026942] rockchip-drm display-subsystem: bound ff970000.edp (ops 0xffffff8008ba62e0)
[ 1.027368] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 1.027392] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.027495] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.028994] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008ba4350)
[ 1.028999] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.029001] No driver support for vblank timestamp query.
[ 1.029200] rockchip-drm display-subsystem: failed to parse loader memory
[ 1.036144] mmc1: MAN_BKOPS_EN bit is not set
[ 1.048942] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 1.050532] mmcblk1: mmc1:0001 AJNB4R 14.6 GiB
[ 1.051427] mmcblk1boot0: mmc1:0001 AJNB4R partition 1 4.00 MiB
[ 1.052481] mmcblk1boot1: mmc1:0001 AJNB4R partition 2 4.00 MiB
[ 1.053373] mmcblk1rpmb: mmc1:0001 AJNB4R partition 3 4.00 MiB
[ 1.057131]mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 1.149709] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[ 1.150326] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.151012] usb 2-1: Product: USB 2.0 Hub
[ 1.153310] hub 2-1:1.0: USB hub found
[ 1.154356] hub 2-1:1.0: 4 ports detected
[ 1.161271] rockchip-vop ff900000.vop: Update mode to 1920x1080p65, type: 14
[ 1.161901] rockchip-vop ff8f0000.vop: Update mode to 1920x1080p60, type: 11
[ 1.165091] rockchip-dp ff970000.edp: Link Training Clock Recovery success
[ 1.166556] rockchip-dp ff970000.edp: Link Training success!
[ 1.215549] usb 3-1: new low-spee[ 1.416812] usb 3-1: New USB device found, idVendor=0000, idProduct=3825
[ 1.417410] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.418116] usb 3-1: Product:USB OPTICAL MOUSE
[ 1.420261] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 1.421075] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 5
[ 1.422010] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.422881] xhci-hcd xhci-hcd.7.auto: irq 226, io mem 0xfe800000
[ 1.423703] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.424312] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.424985] usb usb5: Product: xHCI Host Controller
[ 1.425429] usb usb5: Manufacturer: Linux 4.4.132 xhci-hcd
[ 1.425435] input:USB OPTICAL MOUSE as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:0000:3825.0001/input/input0
[ 1.426935] usb usb5: SerialNumber:
[ 1.428263] hub 5-0:1.0: USB hub found
[ 1.428689] hub 5-0:1.0: 1 port detected
[ 1.429606] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 1.430345] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 6
[ 1.431178] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.432101] usb usb6: New USB device found, idVenusb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.433387] usb usb6: Product: xHCI Host Controller
[ 1.433847] usb usb6: Manufacturer: Linux 4.4.132 xhci-hcd
[ 1.434340] usb usb6: SerialNumber: xhci-hcd.7.auto
[ 1.435651] hub 6-0:1.0: USB hub found
[ 1.436042] hub 6-0:1.0: 1 port detected
[ 1.438630] xhci-hcd xhci-hcd.7.auto: remove, state 1
[ 1.439108] usb usb6: USB disconnect, device number 1
[ 1.468416] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds.
[ 1.469070] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset.
[ 1.469852] xhci-hcd xhci-hcd.7.auto: USB bus 6 deregistered
[ 1.470780] xhci-hcd xhci-hcd.7.auto: remove, state 1
[ 1.471301] usb usb5: USB disconnect, device number 1
[ 1.472568] xhci-hcd xhci-hcd.7.auto: USB bus 5 deregistered
[ 1.476989] hid-generic 0003:0000:3825.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-fe3a0000.usb-1/input0
[ 1.477635] rockchip-dwc3 usb@fe800000: USB peripheral connected
[ 1.480309] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 1.481669] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5
[ 1.482662] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.483551] xhci-hcd xhci-hcd.8.auto: irq 227, io mem 0xfe900000
[ 1.484441] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.485100] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.485781] usb usb5: Product: xHCI Host Controller
[ 1.486253] usb usb5: Manufacturer: Linux 4.4.132 xhci-hcd
[ 1.486780] usb usb5: SerialNumber: xhci-hcd.8.auto
[ 1.488670] hub 5-0:1.0: USB hub found
[ 1.489083] hub 5-0:1.0: 1 port detected
[ 1.490177] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 1.491176] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 6
[ 1.492070] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.493062] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.493718] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.494375] usb usb6: Product: xHCI Host Controller
[ 1.494851] usb usb6: Manufacturer: Linux 4.4.132 xhci-hcd
[ 1.495351] usb usb6: SerialNumber: xhci-hcd.8.auto
[ 1.497656] hub 6-0:1.0: USB hub found
[ 1.498057] hub 6-0:1.0: 1 port detected
[ 1.564111] vendor storage:20160801 ret = 0
[ 1.626558] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff880000.i2s mapping ok
[ 1.627276] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1
[ 1.627998] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
[ 1.628838] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P
[ 1.629511] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P
[ 1.630794] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file
[ 1.631436] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file
[ 1.632147] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file
[ 1.632768] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file
[ 1.633380] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file
[ 1.634209] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file
[ 1.640502] asoc-simple-card hdmi-codec: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 1.644329]
[ 1.644485] =======================================================
[ 1.645112] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 1.645695] =======================================================
[ 1.646257] Realtek 8723BU USB WiFi driver (Powered by Rockchip) init.
[ 1.646864] : rockchip_wifi_power: 1
[ 1.647294] : rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized
[ 1.748822] : wifi turn on power. 149
[ 1.749488] usbcore: registered new interface driver rtl8723bu
[ 1.751230] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 1.754678] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:06 UTC (1358499006)
[ 1.791785] usb 5-1: new low-speed USB device number 2 using xhci-hcd
[ 1.797439] I : : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; : 417; : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-3f436d81badb', rk_ko_ver is '5', built at '10:30:17', on 'Jun 19 2018'.
[ 1.799862] Mali: Mali device driver loaded
[ 1.801379] ALSA device list:
[ 1.801667] #0: rockchip,es8316-codec
[ 1.802012] #1: HDMI-CODEC
[ 1.809461] EXT4-fs (mmcblk1p8): recovery complete
[ 1.809962] EXT4-fs (mmcblk1p8): mounted filesystem with ordered data mode. Opts: (null)
[ 1.810758] VFS: Mounted root (ext4 filesystem) on device 179:8.
[ 1.812233] devtmpfs: mounted
[ 1.813506] Freeing unused kernel memory: 1088K
[ 1.869856] systemd: System time before build time, advancing clock.
[ 1.875729] systemd: Failed to insert module 'autofs4': No such file or directory
[ 1.887487] random: systemd: uninitialized urandom read (16 bytes read, 35 bits of entropy available)
[ 1.890345] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[ 1.891592] usb 2-1.4: new high-speed USB device number 3 using ehci-platform
[ 1.892999] systemd: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 1.895850] systemd: Detected architecture arm64.
Welcome to Ubuntu 16.04.2 LTS!
[ 1.900350] systemd: Set hostname to <firefly>.
[ 1.911143] usb 5-1: New USB device found, idVendor=1c4f, idProduct=0002
[ 1.911795] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.912434] usb 5-1: Product: USB Keyboard
[ 1.912869] usb 5-1: Manufacturer: SIGMACHIP
[ 1.914650] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.915455] usb 5-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.926683] random: systemd: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.928354] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.929632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.930612] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.930662] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.8.auto/usb5/5-1/5-1:1.0/0003:1C4F:0002.0002/input/input2
[ 1.933287] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.938319] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 1.941708] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 1.946389] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 39 bits of entropy available)
[ 1.977752] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=b720
[ 1.978378] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.979117] usb 2-1.4: Product: 802.11n WLAN Adapter
[ 1.979608] usb 2-1.4: Manufacturer: Realtek
[ 1.979998] usb 2-1.4: SerialNumber: 00e04c000001
[ 1.983143] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard on usb-xhci-hcd.8.auto-1/input0
[ 1.991184] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.8.auto/usb5/5-1/5-1:1.1/0003:1C4F:0002.0003/input/input3
[ 1.994717] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 1.995492] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 1.996690] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_fw.bin failed with error -2
[ 1.997474] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin
[ 2.044675] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device on usb-xhci-hcd.8.auto-1/input1
[ 2.167224]
[ 2.167372] 29 81 03 7C 01 08 21 00 40 07 05 35 10 00 00 00
[ 2.167948] 36 36 36 36 35 35 37 37 37 37 36 00 FF FF FF FF
[ 2.168504] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 2.169073] FF FF FF FF FF FF FF FF FF FF 36 36 36 36 35 35
[ 2.169638] 37 37 37 37 36 00 FF FF FF FF FF FF FF FF FF FF
[ 2.170193] FF FF FF FF FF FF FF FF FF FF FFF FF FF FF FF FF FF FF FF FF FF FF
[ 2.184863] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 2.220294] systemd: Reached target Remote File Systems (Pre).
Reached target Remote File Systems (Pre).
[ 2.221478] systemd: Listening on /dev/initctl Compatibility Named Pipe.
Listening on /dev/initctl Compatibility Named Pipe.
[ 2.222649] systemd: Listening on udev Control Socket.
Listening on udev [ 2.240396] systemd: Reached target Remote File Systems.
Reached target Remote File Systems.
[ 2.241159] systemd: Reached target Slices.
Reached target Slices.
[ 2.242026] systemd: Reached target Swap.
Reached target Swap.
[ 2.242967] systemd: Listening on Journal Socket.
Listening on Journal Socket.
[ 2.248217] systemd: Starting Load Kernel Modules...
Starting Load Kernel Modules...
[ 2.254143] systemd: Mounting Debug File System...
Mounting Debug File System...
[ 2.258677] systemd: Starting Journal Service...
Starting Journal Service...
[ 2.265946] systemd: Starting Set console keymap...
Starting Set console keymap...
[ 2.271441] systemd: Starting Remount Root and Kernel File Systems...
Starting Remount Root and Kernel File Systems...
[ 2.276370] systemd: Starting Create Static Device Nodes in /dev...
Starting Create Static Device Nodes in /dev...
[ 2.282464] systemd: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 2.283999] systemd: Failed to start Load Kernel Modules.
Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[ 2.285230] systemd: systemd-modules-load.service: Unit entered failed state.
[ 2.289602] systemd: systemd-modules-load.service: Failed with result 'exit-code'.
[ 2.291016] systemd: Started Remount Root and Kernel File Systems.
Started Remount Root and Kernel File Systems.
[ 2.355948] systemd: Mounted Debug File System.
Mounted Debug File System.
[ 2.357924] systemd: Started Create Static Device Nodes in /dev.
Started Create Static Device Nodes in /dev.
[ 2.378658] systemd: Started Set console keymap.
Started Set console keymap.
[ 2.402083] systemd: Started Journal Service.
Started Journal Service.
Starting udev Kernel Device Manager...
Starting udev Coldplug all Devices...
Starting Flush Journal to Persistent Storage...
Starting Load/Save Random Seed...
Reached target Local File Systems (Pre).
Reached target Local File Systems.
Starting LSB: AppArmor initialization...
Starting Tell Plymouth To Write Out Runtime Data...
Starting Set console font and keymap...
Mounting FUSE Control File System...
Starting Apply Kernel Variables...
Mounting Configuration File System...
Started Load/Save Random Seed.
Mounted Configuration File System.
Mounted FUSE Control File System.
Started udev Kernel Device Manager.
Started Tell Plymouth To Write Out Runtime Data.
Started Apply Kernel Variables.
Started Flush Journal to Persistent Storage.
Started Set console font and keymap.
Created slice system-getty.slice.
Starting Create Volatile Files and Directories...
Started LSB: AppArmor initialization.
Starting Raise network interfaces...
Started udev Coldplug all Devices.
Started Create Volatile Files and Directories.
Reached target Sound Card.
Created slice system-systemd\x2dbacklight.slice.
Starting Load/Save Screen Backlight...htness of backlight:backlight...
Starting Network Time Synchronization...
Starting Update UTMP about System Boot/Shutdown...
Started Dispatch Password Requests to Console Directory Watch.
Reached target Paths.
Started Load/Save Screen Backlight Brightness of backlight:backlight.
Started Update UTMP about System Boot/Shutdown.
Started Network Time Synchronization.
Reached target System Initialization.
Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
Listening on D-Bus System Message Bus Socket.
Started Daily Cleanup of Temporary Directories.
Starting Socket activation for snappy daemon.
Reached target System Time Synchronized.
Started Daily apt activities.
Started Timer to automatically refresh installed snaps.
Reached target Timers.
Listening on Socket activation for snappy daemon.
Reached target Sockets.
Reached target Basic System.
Starting LSB: automatic crash report generation...
Starting Resize root filesystem to fit available disk space...
Starting Login Service...
Started Regular background program processing daemon.
[ 2.888039] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin
Starting Permit User Sessions...
Starting System Logging Service...
Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
Started CUPS Scheduler.
Starting Save/Restore Sound Card State...
Starting Modem Manager...
Started D-Bus System Message Bus.
最后卡在了 Started D-Bus System Message Bus.这句。没有任何反应 a13684942360 发表于 2018-6-20 10:09
DDR Version 1.12 20180518
In
Channel 0: DDR3, 800MHz
我遇到了一个跟你差不多的现象，不过我不是卡在你这个地方，， a13684942360 发表于 2018-6-20 10:06
最后卡在了 Started D-Bus System Message Bus.这句。没有任何反应
你用的内核是什么地方下载的？？ zhuihai 发表于 2018-6-19 17:08
没看到出错信息
这样的是吧，我试了试你用的哪个 官方给的版本，一样的现象
哥们，这个问题我搞定了
看我这个贴子
http://dev.t-firefly.com/thread-14229-1-1.html
页:
[1]