刷sd固件Android8.1*181016.img后HDMI没有输出？
Starting kernel ...[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000rsion 4.4.126 (zouxf@tchip14) (gled
[ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@B
[ 0.000000] cma: Reserved 16 M[ 0.000000] psci: probing for conduit metho.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] ps[ 0.000000] PERCPU: Embedded t 1 zonelists in Zone order, m)
[ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 byte)
[ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] software IO TLB (0MB) mapped at
[ 0.000000] Memory: 3918676K/4030464K available (10878K kernel code, 1716K r)
[ 0.000000] ffbdc3e00000 ( 61 MB actual)
[ 0.000000] fixed : 0000 - 0xffffffc0f8000000 (36 MB)
[ 0.000000] SLUB: HWaler=0-3, MinObjects=0, CPUs=6, No_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@f[ 0.000000] ITS: allocated 65536 s
[ 0.000000] CPU0: found redistributor 0 region 0:0x0000000
[ 0.000000] GICk
[ 0.000000] rockchip_clk_r[ 0.000000] rockchip_cpuclk_pre_rate_change: li1
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffff[ 0.001893] Calibr)
[ 0.004872] Moureezer
[ 0.008164] sched-ene-energy-costs installed from DT
[ 0.008728] CPU0: update cpu[ 0.026031] PCI/MSI: /interrupt-controller@fed
[ 0.027272] Platform MSI: /interrupt-controller@fee00000[ 0.039428] Detec1
[ 0.039460] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.039500] CPU1: using LPI pending tab000fef40000
[ 0.049462] CPU2 processor
[ 0.059441] Detected VIPT I-cache on C
[ 0.069487] Detected PIPT I-cache on CPU4
[
[ 0.069600] CPU4: Booted sec processor
[ 0.07using LPI pending table @0x00000terface
[ 0.093241] CPU: All CPU(s) started at EL2
[ 0.00.096008] devtmpfs: initialized
[ 0.115683] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
[ 0.116661] f[ 0.118008] pinctrl core: ini] Failed to find legacy iommu ds
[ 0.120844] NET: Registered protocol family 16
[ 0_pwr: 0 max_pwr: 222
[ 0.123448] schedtune: CPU min_pwr: 0 max_pwr: .125990] sc4
[ 0.127926] schedtune: uchedtune: max_pwr/2^2: 1078 => n_pwr: 255
[ 0.130820] sches
[ 0.140854] cpuidle: using governor ladder
[ 0.150858] cpuidle: using governor menu
[ 0.151253] Registered FIQ tty driver
[ 0.151957] vdso: 2 pages (1 code @ ff152701] hw-breakpoint: found 6 bcations
[ 0.175582] console enabled
[ 0.176184] pstore: Registered ramoops as persistent store backend
[ 0.176789][ 0.179381] fiq debugger fiq IQ0] enabled
0.180037] console enabled
[ 0.180[ 0.180728] bootconsole [uartiq debugger ttyFIQ0
[ 0.218924] iommu: Adding device ff650000.vpu_service to group 0
[ 0.219001] iommu: Adding device ff660000.rkvdec to group 1
[ 0.219078] iommu: Adding device ff670000.iep to group 2
[ 0.219170] iommu: Adding device ff8f0000.vop to group 3
[ 0.219240] iommu: Adding device ff900000.vommu: can't get aclk
[ 0.220rface: v0.10
[ 0.221644] Linnterface: v2.00
[ 0.221814] river Initialized.
[ 0.22406 socket layer initialized
[ .224943] rockchip-cpuinfo cpuinf[ 0.267361] thermal thermal_zone1: powed
[ 0.267600] NET: Registered protod (established 32768 bind 32768)
[ 0.268544] UDP hash table 68590] UDP-Lite hash table entri[ 0.336871] FrK
[ 0.337425] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 count)
[ 0.340444] audit: type=2000 au[ 0.345665] VFS: Disk quotas dquot_6.6.0
[ 0.345789] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.346816] Registering sdcardfs [ 0.348479]
[ 0.348479] vice "opteearmtz00" (id=0)
[ 0.349102] TEE Core: Register th[ 0.353004] Block layer SCSI generic (bs.
[ 0.358173] IEP Power ON
[ 0.358343] IEP Power OFF
[ 0.358418] IEP Driver loaded sucec ff650000.vpu_service: allocatm
[ 0.359244] rk-vcodec ff65ff660000.rkvdec: probe device
rk-vcodec ff660000.rkvdec: vpodec ff660000.rkvdec: allocator oller: 2
[ 0.3639790.367554] ff180000.serial: ttyf180000 (irq = 38, base_baud = 1rl0
[ 0.388888] brd: module loaded
[ 0.397247] loop: module loaded
[ 0.397811] zram: Added device: zram0
[ 0.398670] SCSI Media Changer driver v0.25
[ 0.399524] rockchip-spi ff1d0000.spi: Failed to request TX DMf1d0000.spi: ne
[ 0.400088] m25p80 spi0.0Max Krasnyansky <maxk@qualcomm.com>
[ 0.402187] rk_gmac-dwmat clock clk_mac_speed
[ 0.40[ 0.407433] rk_gmac-dwmac fe3ormal descriptors
[ 0.407585hecksum Offload Engine supported[ 0.474730] libphy: stmmac: prod
[ 0.474768] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 0.474777] eth%d: PHY ID 001cc915 at 1 IRQ d protocol family 24
[ 0.475sity of California.
[ 0.47603] Rockchip WiFi SYS interface (egasus
[ 0.476261] usbcore: d new interface driver rtl8150
[ 0.476301] usbcore: register6509] usbcore: registered new in driver cdc_ethr
[ 0.476548] usbcore: registered new interf0] usbcore: registered new inter00t
[ 0.477246] usbcore: regisace driver cx82310_eth
[ 0.4e driver cdc_mbim
[ 0.4785580.481007] ohci_hcd: USB 1.1 'Oe driver usblp
[ 0.482012] ue: registered new interface drivinterface driver uas
[ 0.482 new interface driver ums_eneub60
[ 0.482347] usbcore: registered new interface driver ums-j: registered new i2
[ 0.483669] usbr hanwang
[ 0.483933] usbcorered new interface driver kbtab
[ 0.484410] .. rk pwm remotelave:mma7660,id=18
[ 0.48512sensor_register_slave:lsm303d,id230,id=23
[ 0.485145] sensor_register_slave:akm8963,id=31
[ 0.485244] sensor18,id=54
0 probe success with role ROLE_ry_role ROLE_MODE_NONE
[ 0.43x-i2c ff3d0000.i2c: Initializedcc5v0_sys
[ 0.500847] rk808 ip id: 0x0
[ 0.504130] rk808-regulator rk808-regulator: thersys
[ 0.506335] LDO_REG1: supplied by vcc3v3_sys
[ 0.507 LDO_REG5: supplied by vcc3v3_sys
[ 0.511363] LDO_REG6: supp 0-001b: Can not read property pmic,stby-gpio
[ 0.518794] rked RK3xxx I2C bus at ffffff800989a000
[ 0.520922] fusb302 7-ODE_DRP, try_role ROLE_MODE_NONE
[ 0.525359] mp8859 0
[ 0.525699] mp8859 7-006initialized
[ 0.526693] IR Srotocol handler initialized
[vcvideo
[ 0.526934] USB Videriver (1.1.1)
[ 0.526950] Cagister: Expected proper parent d table: code=1023, temperature7
[ 0.534855] deviceoth: HCI UART protocol LL registd
[ 0.535446] rtk_btusb: RTK35453] rtk_btusb: Realtek Blueto[ 0.558954] cpu)
[ 0.559558] cpu cpu4: cpu_leakage=36
[ 0.559614] cpu cpu4: cpu_leakage=36
[ 0.572151] cpu cpu4: temp=50000, pvtm=156751 (156436 + 315)
[ 0.576944] sdhci: Secure Digital Host Controller Interface driver
[ 0.577035] sdhci: Copyright(c) Pierre Ossman
[ 0.577241] Synopsys Designware Multrockchip fe320000.dwmmc: Version 270a
[ 0.579221] dwmmc_rockchip fe320000.dwmmc: DW MMC cont3000000 done
[ 0.580587] roc[ 0.592244] mmc_host mmc0: Bus speed (slot 0) = 400000Hz ()
[ 0.606591] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 0.608969] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.611041] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 0.611078] sdhci-arasa[ 0.638905] mmc1: SDHCI controller on fe330000.sdhA
[ 0.642322] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.645014] usbcore: registered new interface driver usbhid
[ 0.645091] usbhid: USB HID c[ 0.647589] rockchip-dmc dmc:[ 0.650170] r
[ 0.651643] rkna05-08
[ 0.652261] usbcore: registered new interface driver s[ 0.656915] u32 clar
[ 0.656935] Actions configured
[ 0.656970] Netfilter ms via NETLINK v0.30.
[ 0.657026] nf_conntrack version 0.5.0 ] arp_tables: (C) 2002 David S. ] Inik
[ 0.660153] NET: Registered.662718] sit: IPv6 over IPv4 tuner
[ 0.663392] NET: Registertic filtering via arp/ip/ip6tables has been depreca1
[ 0.665528] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 0.6p_ppp: PPPoL2TP kernel driver, V2.0
[ 0.665651] [WLAN_RFKILL: Enter rfkill_wlan_init
[ 0ts version 1
[ 0.669932] rocchip ion idev is NULL
[ 0.66] rga2 ff680000.rga: rga ion cli[ 0.676227] rockchip-drm display-suq
[ 0.676625] rockchip-vo 0.677323] rockchip-vop ff8f00vop: unable to requesM
system: bound ff940000.hdmi (opsr support for vblank timestamp query.
[ 0.684842] cdn-dp fec00000.dp: mp8859 y
[ 0.762707] mp8859 7-0066: mp8859 get ufp 1 dp 0
[ 0.763810] mp8859 7-0066: set mp8859 out 12v ok
[ 0.774558] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000e
[ 0.774848] rockchip-iodomain ff770000.[ 0.799377] mmc_host mmc0: Bus spe)
[ 0.889514] fusb302 7-0022: PD connected as UFP, fetching 5V
[ 0.890616] cdn-dp fec00000.dp: N[ 0.926387] ry
[ 0.926605] rockchip-drm display-subsystem: failed to show loader logo
[[ 0.988863] mp8859 7-0066: mp8859 get notify
[ 0.988905] mp8859 7-0066: mp8859 get ufp 1 dp 1
[ 0.990060] mp8859 7-0066: set mp8859 out 12v ok
[ 1.075558] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 175
[ 1.075649] mmc0: new ultra high speed SDR104 SDHC card at address aaaa
[ t: 0x000400000 -- 0x000800000 (4 MB)
[ 1.078829] trust:nel: 0x002000000 -- 0x004000000 1.079648] bo)
[ 1.080335] security: 0x011000000 -- 0x011400000 (4 MB (512 MB)
[ 1.081733] p: 0x112800000 -- 0x112880000 (0
[ 1.211403] rockchip-drm display-subsystem: fb0:frame buffer device
[ 1.224845] vendor storage:20160801 ret = 0
[ 1.231720] xhci-hcd xhci-hcd.11.auto: xHCI Host Controller
[ 1.232445] xhci-hcd xhci-hcd.11.auto: new USB bus registered 0x110 quirks 00
1.234773] usb usb1: SerialNumbegistered, assigned bus number 2
[ 1.238643] usb usb2: We don] usb usb2: New USB device found1.241482] hub 2-1
[ 1.270738] xhci-hcd xhci-hcd.11.auto: Host not halted after 16000 microseco.
[ 1.270786] xhci-hcd xhci-hcd.11.auto: Host controller not halted, abort-hcd1
d
[ 1.280241] xhci-hcd xhc649] xhci-hcd xhci-hcd.12.auto: new USB bus register2
[ sb usb1: Manufacturer: Linux 4.4.126 xhci-hcd
[ 1.281626] us2: We don't know the algorithms for LPM for this host, disablid
[ 1.285699] usb usb2: SelNumber: xhci-hcd.12.auto
[ 87070] hub 2-0:1.0: 1 port detecxhci-hcd xhci-hcd.12.auto: USB bregistered
[ 1.294057] ehci-[ 1.305645] ehci-platform fe380000.usb: USB 2.0 started,0
USB bus registered, assigned bu[ 1.322346] ehci-platform fe3c0000.usb: USB 0
[ 1.322652] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.322690] usb usb2: New USB device str USB hub found
[ 1.324181] hub 2-0:1.0: 1 port detected
[ bus number 3
[ 1.326781] ohci-platform fe3a0000.usb: irq 28[ 1.383524] usb usb3: New U1
[ 1.383733] usbUSB device strings: Mfr=3, Produ, SerialNumber=1
[ 1.383954][ 1.388391] ohci-platform fe3e0000.usb: Generic Platform OHCI r
[ 1.389667] ohci-platform fe3e0000.usb: new USB 0
[ 1.446807] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.449782] hub 4-0:1.0: 1 port detectedings: Mfr=3, Product=2, SerialNumber1
[ 1.452655] rockchip-dmc dmc:ailed to get vop bandwidth to dm[ 1.454696] D
[ 1.456539] hdmi-audio-codec hdmi-audio-codec.10.auto: ASoC[ 1.464517] rk)
[ 1.465933] It doesn't contain Rogue gpu
[ 1.497184] ret 1024
[ 1.498373] I : : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linuk
[ 1.503165] usb-ext-charge usb-charge: interrupt haprge: probe success
[ 1.50513ice list:
[ 1.505205] #0: rk-hdmi-dp-sound
[ 1.506167][ 1.513598] init: init first stage started!
[ 1.514298] init: Using Android DT directory /proc/device-tree/firmware/andr8
[ 1.61stem,target=/system,type=ext4)=0[ 1.625219] EXT4-fs (mmcblk0p13): m8
[ 1.625326] init: __mount([ 1.628782] usb 2-1: new highm
[ 1.745132] audit: type=1403 audit(1358499004.776:2): policy loaded auid=4295
[ 1.745614] selinux: SELinux: Loaded policy from /vendoy
[ 1.745614]
[ 1.753012] selinux: SELinux: Loaded file_contexts
[ 1.753012]
[ 1.754359] random: init: uninitialized urandom read (40 bytes read, 62 bits)
[ 1.755702] inumber=0
[ 1.756162] usb 2-1: Product: USB 2.0 Hub
[[ 1.763051] init: Using Android DT directory /proc/device-tree/firmware/a/
[ 1.763640] init: Set boot.mode to sd
[[ 1.766509] selinux: SELinux: Loaded file_contexts
[ 1.766509]
[ 1.767212] selinux: [ 1.773085] init: waitid failed: No child processes
[ 1.776205] init: Couldn't load property file: Unable to open '/odm/default.t
[ 1.77882' to import list
[ 1.779482]: Added 'init.rk30board.bootmode.sd.rc' to import list
[ 1.7import list
[ 1.783882] initdded 'init.car.rc' to import list
[ 1.784104] init: Added 'iist
[ 1.785623] init: Added tory
[ 1.786365] init: /initrc: 3: Could not import file '/id not import file 'inb
.
[ 1.786.rc': No such file or directory
[ 1.786970] init: /init.rc: : /init.rc: 8: Could not import ile 'init.optee.y
[ 1.791261] i 1.793059] init: Parsing file /system/etc/init/android.hidl.a.
[ ootanim.rc...
[ 1.796907] in.
35] init: Parsing file /system/enit/logcatd.rc...nager.rc...
[ 1.803243] init: Parsing file /system/etcit/mediaextractor.rc...
[ 1.em/etc/init/perfprofd.rc...
[ 1.808510] init: Parsing file /tem/etc/init/thermalservice.rc.. 1.811086]d
.
[ 1.81775init: Parsing file /vendor/etc/iardware.graphics.allocator@2.0-serv.
[ 1.819866] ini.hardware.graphics.composer@2.1-service.rc...
[ 1.820392] init: Parsing file /vendor/etc/init/android.hardware.keymaster@3.
[ 1.822445] inisors@1.0-service.rc...
[ 1.823478] init: Parsing file /vendo Parsing file /odm/etc/init...
1.825605] init: Unable to openport. Nested cgroups may change r in the future.
[ 1.830181]1 on the root
[ 1.831123] in
[ 1.836882] ueventd: Unable to open '/vendor/ueventd.rc': Nntd.rk30board.rc:'
[ 1.838517] ueventd:1.838631] ueventd: /ueventd.rk30board.rc: 60: invalid s
[ 1.962764]
[ 2.022146] usb 2-1.2: new full-speed USB device number 3 using ehci-platform
[ 2.037243] ueventd: Coldboot took 0.189 seconds
[ 2.039306] init: Command 'wait_for_coldboot_done' action=wait_for_coldboot_.
[ 2.039_random not found
[ 2.039551] init: processing action (set_mmap_rnd_bits) from (<Builtin Actio)
[ 2.040297] init: processing action (set_kptr_restrict) fut dev ff420030.pwmt
o open '/proc/cpu/alignment': No or directory
[ 2.062234] Registered swp emulation handler
[ 2.062508] init: Unable to open '/sys/class/leds/vibrator/trigger': No suchd
d
[ 2.06667084] init: processing action (fs) from (init.rk30board.bootmodesupen
[ 2.091450] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode.t
[ 2.091734] init: check_fs(): mount(/dev/block/platform/[ 2.109
[ 2.109338] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumbed
[ 2.117631] input: Logitech USB Gaming Mouse as /devices/platform/fe3c0000.u2
[ 2.123358] init: Running /system/bin/e2fsck on /dev/block/platfo)
[ 2.169212] hid-generic 0003:046D:C049.0001: input,hidraw0: USB HID v1.11 Mo1
[ 2.245664] random: e2fsck: uninitialized urandom read (40 bytes read, 75 bi)
[ 2.279474] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
[ 2.279474]
[ 2.279628] e2fsck: oem: clean, 15/32768 files, 4209/131072 blocks
[ 2.279628]
[ 2.285000] EXT4-fs (mmcblk0p14): mounted filesystem with ordered data mode.c
[ 2.285316] init: __mount(source=/dev/block[ 2.287157] init: [)
[ 2.379771] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
[ 2.379771]
[ 2.379950] e2fsck: /dev/block/platform/fe320000.dwmmc/by-name/cache: recovey
[ 2.380153]
[ 2.3e2fsck: Pass 4: Checking referens 5: Checking group summary info[ 2.s
[ 2.[ 2.392662] EXT4-fs (mmcblk0p12): Ignoring removed nomblk_io_[ 2.4e
[ 2.405306] EXT4-fs (mmcblk0p12): mounted filesystem with ordered datplatford
[ 2.424485] init: Running /system/bin/e2fsck on /dev/block/platfo)
[ 2.444404] audit: type=1400 audit(1358499005.476:3): avc:denied{ read }1
[ 2.445040] audit: tyontext=u:object_r:metadata_block:s0 tclass=blk_file per)
[ 2.512278]
[ 2.512508] e2fsck: Pass 1: Checking inodes, blocks, and2.513160] e2fsck: Pas
[ 2.513160]
[ 2.513658]
[ 2.522399] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode.d
[ 2.523434] init: __mount(source=/dev/block/platform/fe320000.dwm)
[ 2.535774] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_FLOATING_R
[ 2.549049] random: fsck.f2fs: uninitialized urandom read (40 bytes read, 88)
[ 2.557747] fsck.f2fs: Info: Fix the reported corruption.
[ 2.557747]
[ 2.557885] fsck.f2fs: Info: Segments per section = 1
[ 2.557885]
[ 2lid F2FS superblock at 0x0
[ 2.558144] fsck.f2fs: Can't 2FS-fs (mmcblk0p16): Magic Misman 2th supk
[ 2.561198] F2FS-fs (mmcblk0p16): Magic Mismatch, valid(0xf2f52010) - read(1a
[ 2.582067] fsck.f2fs: Info: Fix the reported corruption.
[ 2.582067]
[ 2.582367] fsck.f2fs: Info: Segments per sect583020]
[ 2.583244] fsck.f2 valid(0xf2f52010) - read(0xab0e 2.587170] F2FS-fs (mmcs
[ 2.5925..
[ 2.592691] init: Unable to open '/odm/etc/init': No such882] init: Command )
[ 2.596784] init: Couldn't load proper[ 2.599866] init: property_set("ro.t
[tory
[ 2.602671] init: /recovery not specified in fstab
[ 2.606277] init: starting service 'logd'...
[ 2.609384] init: Created socket '/dev/socket/logd', mode 666, user 1036, gr6
[ 2.609909] init: Created socket '/dev/socket/logdr', mode 666, userit: Open.
[ 2.620342] init: starting service 'vndservicemanager'...
[ 2.625292] selinux: SELinux: Skipping restorecon_recursive(/cache)
[ 2.625292]
[ 2.635290] init: processing action (post-fs) from (/init.rk30board.rc:10)
[ 2.635610] selinux: SELinux: Skipping restorecon_recursive(/metadata)
[ 2[ 2.644872] init: insmod: open("/system/lib/modules/ump.ko") failed: Ny
[ 2.645179] init: insmod: [ 2.715590] logd.auditd: start
[ 2.715696] logd.klogd: 2713607623
[ 2.861990] binder: 212:212 ioctl 620a 0 returned -22
[ 3.039790] mali ff9a0000.gpu: gpu_leakage=23
[ 3.052740] mali ff9a0000.gpu: temp=50555, pvtm=121051 (120943 + 108)
[ 3.055974] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 3.056217] mali ff9a0000.gpu: Protected mode not available
[ 3.057635] mali ffu/arm/midgard/backend/gpu/mali_k[ 3.061846] init: Comm2
[ 3.108175] mkswap: Swapspace size: 1969104k, UUID=541b2a81-7fc5-4c23-809a-92
[ 3.110245] Adding 1969104k swap 61] init: processing action (possing action)
[ 3.117426] init: processing action (late-fs) from (/init.rc:363)
[ 3.121030] init: starting service 'keymaster-3-0'...
[ 3.122310] init: processing action) from (/init.rc:371)
[ 3.12[ 3.125379] init: Created socket '/dev/socket/vold', mode 660, user9
[ 3.12627445] init: Unable to open '/daa/misc/recovery/ro.build.fingerpinit:.
[ 3.148497] init: SVC_EXEC pid 228 (uid 0 gid 0+0 context default) started; .
[ 3.299306] init: Service 'exec 1 (/system/bin/vdc --wait cryptfs init_user0.
[ 3.325621] init: SVC_EXEC pid 232 (uid 1000 gid 1000+0 context default) sta.
[ 3.330802] init: Service 'exec 2 (/system/bin/tzdatacheck /system/usr/share)
[ 3.338637] tmpfs: Bad mount option background_gc
[ 3.339350] init: pstem/etc/init/logtagd.rc:4)
[ 3.340708] init: processing action (post-fs-data) from (/vendore 'logd-rein.
[ 3.34211it: processing action (load_persist_props_action) from (/system/[)
[ 3.372416] init: Unable to open '/proc/sys/vm/min_free_order_shift': No sucy
[ 3.376836] init: starting service 'hidl_memory'...
[ 3.378016] init: starting service 'audio-hal-2-0'...
[ 3.379210] logd.daemon: reinit
[ 3.379636] init: starting service 'bluetooth-1-0'...
[ 3.381059] i[ 3.382687] init: couldn't write 237 to /dev/cpuset/camera-d.
t: starting service 'drm-hal-1-0[ 3.391778] init: starting service 'gralloc-.
[ 3.396360] init: starting service 'hwcomposer-2-1'...
[ 3.400602] init: starting service 'light-hal-2-0'...
[ 3.403502] init: starting service 'neuralnetworks_hal_service_armnn'...
[ 3.405351] init: starting service 'power-hal-1-0'...
[ 3.407291] init: starting service 'sensors-hal-1-0'..[ 3.409125] init: s.
[ 3.410683] init: Service 'logd-reinit' (pid 233) exited with sta93] init: cy
[ 3.41351urfaceflinger'...
[ 3.416567ctory
[ 3.416972] init: Fail to bind socket 'pdx/system/vr/dfrom (/init.rk30board.)
[ 3.420750] init: Unable to ope[ 3.501665] selinux: SELinux:Could not s.
[ 3.501665]
[ 3.501948] init: Command 'restorecon_recursive [ 3.505541] init: processo
[ 3.508244] type=1400 audit(1358499006.540:7): avc: denied 3 scontext=u:r:inf
[ 0 audit(1358499006.540:7): avc: denied { getattr } for pid=1 com path="/vend
[ 3.541313] type=1400 audit(1358499006.543:9): avc: denied { read open } fors
[ 3.549879] using random host ethernet address
[ 3.550045] init: Unable to open '/config/usb_gadget/g1[ 3.554049] init: )
[ 3.562816] init: processing action (boot) from (init.rk3399.rc:13)
[ 3.570150] init: processing action (boot) from (/system/etc/init/bootstat.r)
[ 3.570352] init: processing action (bog action (ro.debuggable=1) from (/ini)
[ 3.573429] i[ 3.575241] init: processing action (ro.boot.noril=true) fro)
[ 3.575551] initfs=1) from (init.rk30board.usb.rc:43)
[ 3.577192] init: setp77447] init: starting service 'a8975] type=1400 audit(0
[ 3.579094] init:d { read } for pid=1 comm="init" name="ttyFIQ0" dev="tmpfs"0
[ 3.579789] init: starting service 'exec633 scontext=u:r:init:s0 tcontext=u:0
[ 3.583052] type=1400 audit(13v="tmpfs" ino=10633 scontext=u:r:init:s0 tconts
[ 3.612452] init: Service 'exec 3 (/system/bin/vdc --wait cryptfs mountdefaus
[ 3.613623] healthd: BatteryCurrentNowPath not f BatteryCycleCountPath not fd
ROC_RK3399_PC:/ $ [ 3.866362] read descriptors
[ 3.866386] read strings
[ 4.795941] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[ 4.796186] E:camsys_i2c_write(84): i2c wri[ 4.810778] rockchip-pinctrl pp
[ 4.8-11) from group cif-clkouton d[ 4.822692] E:camsys_i2c_write(84): 6
[ 4.822997] E:camsys_i2c_write(84): i2c wri[ 4.833413] rockchip-pinctrl pp
[ 4.8ff910000.isp: Error applying setting, reverse things back
[ [ 4.845509] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,er6
[ 4.845917] E:camsys_i2c_write(84): i2c wri[ 4.853787] init: starting ser.
[ 4.856093] rockchip-vop ff900000.vop: Update mode to 6
[ 4.878630] E:camsys_i2c_write(84): i2c wri[ 4.889456] rockchip-pinctrl pp
[ 4.810000.isp: Error applying settin[ 4.900204] E:camsys_i2c_write(84): 6
[ 4.900375] E:camsys_i2c_write(84): i2c write dev(addr:0x3f) failed!,err = [p
[ 4.9etting, reverse things back
[ 4.911165] E:camsys_mrv_iomux_cb[ 4.921949] E:camsys_i2c_write(84): i2c w6
[ 4.922130] E:camsys_i2c_write(84): i2c wri[ 5.110753] init: Unable to wry
[ [ 5.144853] fsck.f2fs: Info: Fix the reported corruption.
[ 5.144853]
[ 5.144893] fsck.f2fs: Info: Segments per sect12
[ 5.144920]
[ 5.1449 5.144946]
[ 5.144954] fsck.f2fs: Info: FSCK version
[ on 6.3.1 20170404 (Linaro GCC 6.05) ) #22 SMP PREEMPT Tue Oct 1615:42:32 CST "
[ 5.14500 salt = 000000000000000000000000[ 5.310094] init: processing act)
[ 5.310166] init: processing [ 5.365095] init: starting service 'exec 4 (.
[ 5.366133] init: SVC_EXEC pid[ 5.384756] init: Service 'exec 4 (/system/s
[ 5.384930] selinux: SEted; waiting...
[ 5.394315] init: Service 'exec 5 (/system/bin/tzdatacheck /system/usr/share)
[ 5.401509] init: Unable to find GID for 'system': getpwnam failed: No su[)
[ 5.408617] init: processing action (post-fs-data) from (init.rk3399.rc:37)
[ 5.408827] i[ 5.419569] init: processing action (init.svc.bootanim=runni)
[ 5.419973 pid 339 (uid 1000 gid 1007+0 cotext default) started; waiting..[ )
[ 5.435449] init: processing action (vold.decrypt=trigger_load_persist_propst
[ 5.501539] init: Command 'load_persist_props' actieinit'...
[ 5.503211] init: property_set("ro.boottime.logd-ry': No such file or directy
init: cannot find '/system/bin/bplus_helper', disabling 3] init: canno.
[ 5.507[ 5.512385] init: Created soc5.513861] init: couldn't write 3[ .
[ 5.524371] init: starting service 'keystore'...
[ 5.527915] init: starting service 'mediadrm'...
[ 5.530087] init: starting service 'mediaextractor'...
[ 5.532334] init: starting service 'mediametrics'...
[ 5.534581] init: starting se[ 5.536855] init: starting service 'netd'...
[ 5.538983] init: Created socket '/dev/socket/netd', mode 660, user 0, group0
[ 5.540819] init: Failed to open file [ 5.545756] init: starting service .
[ 5.547844] init: Service 'logd-reinit[ 5.549063] init: starting service .
[ 5.572217] init: cannot find '/system/xbin/perfprofd', disabling 'perfprofdy
[ 5.572614] init 1000, group 1000
[ 5.574725] init: processing action (persi00, group 1000
[ 5.575691] ieated socket '/dev/socket/tombst00
[ 5.576988] init: process[ 5.588903] init: processing action (sys.usb.con)
[ 5.589369] init: processing action (sys.uys.usb.ffs.ready=1) from (/init.us)
[ 5.5918(/init.usb.configfs.rc:18)
[ 5.592057] init: processing action (sys.usb.config=adb && sys.usb.configfs=)
[ 5.642294] init: Sending signal 9 to service 'adbd' (pid 257) processffc0ed8
[ 5.643471] android_work: did not send uevent ([ 5.647754] init: Successf9
[ 5.653510] init: Service 'drmservice' (pid 356) exited with [ 6.001713] f
[: avc: denied { execute_no_trans[ 6.033443] audit: audit_lost=1 audit_rate_d
[ 6.088323] init: Untracked pid 423 exited with status 0
[ 6.139085] init: Untracked pid 431 exited with status 0
[ 8.578124] init: starting service 'adbd'...
[ 8.579291] init: property_set("ro.boottime.adbd", "8576456379") failed: prot
[ 8.581272] init: Created socket '/dev/soc[ 8.597614] read descriptors
[ 8.597727] read strings
[ 8.598484] init: processing action (sys.usb.config=adb && sys.usb.configfs=1
[ 8.872557] init: Untracked pid 434 killed by signal 1
[ 9.830675] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 9.965614] capability: warning: `main' uses 32-bit capabilities (legacy sup)
[ 13.305035] healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
[ 13.880845] init: processing action (sys.sysctl.extra_free_kbytes=*) from (/)
[ 14.614156] acc_open
[ 14.614186] acc_release
[ 14.875099] rk_gmac-dwmac fe300000.ethernet: rk_get_eth_addr: mac address: 04
[ 14.875120] eth0: device MAC address 0e:45:29:c2:c2:b4
[ 15.055761] type=1400 audit(1358499009.053:28): avc: denied { execute_no_tra0
[ 15.079465] sdcardfs: dev_name -> /data/media
[ 15.079473] sdcardfs: options -> fsuid 15.080620] sdcardfs : options -g:1
[ 15.080627] sdcardfs : options - gid:9997
[ 15.080634[ 15.125786] init: starting service 'webview_zygote32'...
[ 15.128120] init: Created socket '/dev/socket/webview_zygote', m[ 17.427330
[ 17.562538] init: processing action (sys.usb.config=none && sys.usb.configfs)
[ 17.564645] init: processing action (sys.us-gadget gadget: unbind function Fs
[ 17.573487] init: Service 'adbd' (pid 462) killed by signal 9
[ 17.576654] init: processing action (sys.boot_completed=1) fr.576816] init: y
[ 17.585320] init: startingrom (init.rk3399.rc:1)
[ 17.587704] init: processing action (tcomplete=1) from (/system/etc/ittr } fs
[ 17.591752] type=1400 audit(1358499020.620:83): avc: deniedm="usb_mode_switce
f
[ 17scontext=u:r:mode_switch:s0 tcontext=u:object_r:shell_exec:s0 tc[ 17.61.
[ 17.620425] type=1400 audit(1358499020.630:85): avc: denied { read } for pidf
[ 17.620520] typ00 audit(1358499020.650:86): avccomm="usb_mode_switch" name="f
[ 17.620984] type=1400 audit(13584990955 comm="usb_mode_switch" path=h.sh" def
[ 17.623569dit(1358499020.653:88): avc: denied { getattr } for pid=959 comm=f
[ 17.623608] type=1400 aud scontext=u:r:mode_switch:s0 tcotext=u:object_r:toof
[ 17.623901] type=1400 audit(1358499020ath="/system/bin/toybox" dev="mmcblk0p.
[ 17.640907] init[ 17.654459] init: Service 'exec 9 (/system/bin/bootstat -s
[[ 17.670045] init: Service 'exec 10 (/system/bin/bootstat -l)' (pid 961) es
)
[ 17.754641] init: processing .757913] init: processing action (sys.usb.confi)
[ 17.759282] init: starting service 'adbd'...
[ 17.762986] init: property_set("ro.boottime.adbd", "17757938635") failed: prt
[ 17.767875] init: Created ket/adbd', mode 660, user 1000, group 1000
[ 17.772643] read ors
[ 17.772664] read strings
[ 17.773813] init: processing action (sys.usb.config=adb && ady=1) from (/ini)
[ 20.316272] type=1400 audit(1358499020.656:91): avc: denied { execute_no_traf
[ 20.316822] type=1400 audit(135849tem_app:s0 tcontext=u:object_r:se=1400 audu
healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au
healthd: battery l=50 v=3 t=2.6 h=2 st=3 fc=100 chg=au 显示器支持电视规格的分辨率吗，目前8.1并不支持1366x768等显示器分辨率 好的 改了hdmi2.0可以显示了，测试了hdmi1.4也可以显示；就是1.0无法用，谢谢！
页:
[1]