Firefly开源社区

标题: px30 启动后报告已系列错误 [打印本页]

作者: tuf 时间: 2020-5-29 14:52
标题: px30 启动后报告已系列错误
我自己编译的固件，使用的源码是 linux-sdk-px30-20200512.7z

当PX30启动后，报告一系列错误如下，而且debug串口输入没有任何反应。

U-Boot 2017.09-g0c15140-dirty (May 29 2020 - 14:39:57 +0800)

Model: Rockchip PX30 EVB
PreSerial: 2
DRAM:  992 MiB
Sysmem: init
Relocation Offset is: 3dbe5000
Using default environment

dwmmc@ff370000: 1, dwmmc@ff390000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 150Mhz
PartType: EFI
boot mode: None
init_resource_list: failed to get resource part, ret=-1
Read kernel dtb failed, ret=-19
Model: Rockchip PX30 EVB
CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0 KHz)
  apll 600000 KHz
  dpll 664000 KHz
  cpll 24000 KHz
  npll 1188000 KHz
  gpll 1200000 KHz
  aclk_bus 200000 KHz
  hclk_bus 150000 KHz
  pclk_bus 100000 KHz
  aclk_peri 200000 KHz
  hclk_peri 150000 KHz
  pclk_pmu 100000 KHz
Net: No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "(none)"
** Invalid Android Image header **
Android image load failed
Android boot failed, error -1.
=Booting Rockchip format image=
Could not found misc partition
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
## Error: "rknand_boot" not defined
starting USB...
No controllers found
USB is stopped. Please issue 'usb start' first.
starting USB...
No controllers found
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-rockchip
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
starting USB...
No controllers found
No ethernet found.
=>

作者: tuf 时间: 2020-5-29 21:19
是由于配置脚本使用错误造成的。

作者: lsk 时间: 2021-4-7 16:09

tuf 发表于 2020-5-29 21:19
是由于配置脚本使用错误造成的。

你好我现在也遇到了这个问题能告诉一下怎么解决的吗具体的解决方法

欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)