Firefly开源社区

标题: 【AIO-3399-JD4】sdk编译ubuntu16.04，img烧写不正常 [打印本页]
作者: sunshuai1900    时间: 2021-8-10 16:47
标题: 【AIO-3399-JD4】sdk编译ubuntu16.04，img烧写不正常
按照wiki，下载官网的ubuntu16.04镜像，放入sdk指定路径下，修改配置文件，并执行build.sh aio-3399-jd4-ubuntu.mk。将生成的整体固件，烧写到开发板后，报如下错误。
  1. [    4.600589] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=300
  2. [    4.601196] dhd_bus_devreset:  WLAN OFF DONE
  3. [    4.602408] wifi_platform_set_power = 0
  4. [    4.602785] ======== PULL WL_REG_ON(-1) LOW! ========
  5. OK[    4.603232] [WLAN_RFKILL]: rockchip_wifi_power: 0

  7. [    4.603680] [WLAN_RFKILL]: wifi shut off power.
  8. [    4.604082] dhdsdio_probe : the lock is released.
  9. [    4.604757] dhd_module_init: Exit err=0
  10. Debug: configfs_init
  11. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac1.gs0': No such file or directory
  12. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uac2.gs0': No such file or directory
  13. [    4.627810] file system registered
  14. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/mtp.gs0': No such file or directory
  15. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/rndis.gs0': No such file or directory
  16. [    4.637183] Mass Storage Function, version: 2009/09/11
  17. [    4.637685] LUN: removable file: (no medium)
  18. mkdir: can't create directory '/sys/kernel/config/usb_gadget/rockchip/functions/uvc.gs6': No such file or directory
  19. [    4.658878] read descriptors
  20. [    4.659143] read strings
  21. sh: write error: No such device
  22. Starting input-event-daemon: input-event-daemon: Start parsing /etc/input-event-daemon.conf...
  23. input-event-daemon: Adding device: /dev/input/event0...
  24. input-event-daemon: Adding device: /dev/input/event1...
  25. input-event-daemon: Adding device: /dev/input/event2...
  26. input-event-daemon: Start listening on 3 devices...
  27. done
  28. /etc/init.d/rcS: line 28: alsactl: not found
  29. [root@buildroot:/]# rotate degree: 0 - none, 1 - right, 2 - down, 3 - left.
  30. current rotate degree is : 0
  31. Ui upgrade
  32. recovery filesystem table
  33. =========================
  34.   0 (null) /tmp ramdisk (null) (null) (null)
  35.   1 /dev/root / ext2 rw,noauto 0 1
  36.   2 proc /proc proc defaults 0 0
  37.   3 devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
  38.   4 tmpfs /dev/shm tmpfs mode=0777 0 0
  39.   5 tmpfs /tmp tmpfs mode=1777 0 0
  40.   6 tmpfs /run tmpfs mode=0755,nosuid,nodev 0 0
  41.   7 sysfs /sys sysfs defaults 0 0
  42.   8 debug /sys/kernel/debug debugfs defaults 0 0
  43.   9 pstore /sys/fs/pstore pstore defaults 0 0
  44.   10 /dev/block/by-name/misc /misc emmc defaults 0 0
  45.   11 /dev/block/by-name/oem /oem ext2 defaults 0 2
  46.   12 /dev/block/by-name/userdata /userdata ext4 defaults 0 2

  48. buf = /dev/block/by-name/misc
  49. ### get mount_ponit = /dev/block/by-name/misc ###
  50. emmc_point is /dev/mmcblk1
  51. sd_point is (null)
  52. sd_point_2 is (null)
  53. Recovery start....................
  54. read cmdline
  55. >>> Boot from non-SDcard
  56. buf = /dev/block/by-name/misc
  57. ### get mount_ponit = /dev/block/by-name/misc ###
  58. devices is not MTD.
  59. I:Boot command: boot-recovery
  60. I:Got arguments from boot message
  61. buf = /dev/block/by-name/misc
  62. ### get mount_ponit = /dev/block/by-name/misc ###
  63. devices is not MTD.
  64. Command: "recovery" "--wipe_all"


  67. Formatting /userdata...
  68. No link to path!!!
  69. No link to path!!!
  70. format '/dev/block/by-name/userdata' to ext4 filesystem
  71. executing '/sbin/mke2fs'
  72. [    8.202692] random: nonblocking pool is initialized
复制代码


过几十秒后会自动重启，之后一直打印：
[   11.473465] mali ff9a0000.gpu: Stride passed to job_submit doesn't match kernel

同时HDMI也无输出。

有遇见过的么？？？
作者: sunshuai1900    时间: 2021-8-10 16:49
另外，使用配套资料里面的：AIO-3399-JD4\固件\Ubuntu\ubuntu18.04\Public\*.img，一切正常，HDMI也正常。硬件上应该没有问题



欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/) Powered by Discuz! X3.1