标题: 自己编译固件start kernel反复重启，请大家看看哪里的问题哦，跪谢！ [打印本页] 作者: dusantei123 时间: 2016-7-21 14:00 标题: 自己编译固件start kernel反复重启，请大家看看哪里的问题哦，跪谢！ DDR Version 1.00 20150318
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT
U-Boot 2014.10-RK3288-10 (Apr 15 2016 - 15:17:22)
CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment
GetParam
check parameter success
failed to prepare fdt from boot!
power key: bank-0 pin-5
can't find dts node for ricoh619
pmic:act8846
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2016-04-15#2.19
empty serial no.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
can't find power_ctr node for lcdc1
pll_src = 1, dclk_hz = 148500000, dclk_div = 2
failed to find part:logo
no fuel gauge found
Hit any key to stop autoboot: 0
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot
find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x02000000 (0x00694938)
ramdisk @ 0x05bf0000 (0x00147bf4)
bootrk: do_bootm_linux...
Loading Device Tree to 05600000, end 0561b7fc ... OK
Add bank:0000000000000000, 0000000080000000