Firefly开源社区

标题: 关于pad版 修改dts后不能启动问题 [打印本页]

作者: sulq23    时间: 2015-4-28 16:09
标题: 关于pad版 修改dts后不能启动问题
1、我使用pad版 内核,什么都没改。使用AndroidTool_Release_v2.3烧写Loader、Parameter、Misc、Resource、Kernel、Boot、Recovery、System。
     DDR Version 1.00 20141007
In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT


U-Boot 2014.10-RK3288-02 (Feb 26 2015 - 14:42:13)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 300000000HZ
    ddr pll = 200000000HZ
    codec pll = 594000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
failed to prepare fdt from boot!
power key: bank-0 pin-5
pmic:act8846
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2015-02-26#2.17
sn:100612000000033C
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
got recovery cmd from misc.
failed to load fdt from recovery!
kernel   @ 0x02000000 (0x0065a630)
ramdisk  @ 0x04bf0000 (0x003d4b94)
Secure Boot state: 0
bootrk: do_bootm_linux...
   Loading Device Tree to 04809000, end 04826a49 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...
之后就不动了,将Parmeter更改为
CMDLINE:console=ttyS2 earlyprintk androidboot.hardware=rk30board androidboot.console=ttyS2 board.ap_has_alsa=0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user)
能正常进入recovery 然后重新启动系统。
2、使用更改的Parameter,修改kernel中firefly-rk3288.dts文件,将i2c5 status=“disabled”改为status=“okay”,重新编译内核。按照1中烧写,启动信息如下
DDR Version 1.00 20141007
In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT


U-Boot 2014.10-RK3288-02 (Feb 26 2015 - 14:42:13)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 300000000HZ
    ddr pll = 200000000HZ
    codec pll = 594000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
failed to prepare fdt from boot!
power key: bank-0 pin-5
pmic:act8846
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2015-02-26#2.17
sn:100612000000033C
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
got recovery cmd from misc.
failed to load fdt from recovery!
kernel   @ 0x02000000 (0x0065a630)
ramdisk  @ 0x04bf0000 (0x003d4b94)
Secure Boot state: 0
bootrk: do_bootm_linux...
   Loading Device Tree to 04809000, end 04826a45 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

<hit enter to activate fiq debugger>
[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (smdt@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 30 17:19:27 CST 2015
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] hdmi init vic is -1
[    0.000000] rockchip_ion_reserve
[    0.000000] ion heap(cma): base(40000000) size(28000000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 640 MiB at 40000000
[    0.000000] ion_reserve: cma reserved base 40000000 size 671088640
[    0.000000] cma: CMA: reserved 16 MiB at 2e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1dea000 s14016 r8192 d14656 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user) storagemedia=emmc loader.timestamp=2015-02-26_14:42:13 hdmi.vic=-1 androidboot.serialno=100612000000033C
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 1385668k/1385668k available, 711484k reserved, 663552K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0af0514   (11170 kB)
[    0.000000]       .init : 0xc0af1000 - 0xc0b856c0   ( 594 kB)
[    0.000000]       .data : 0xc0b86000 - 0xc0c8e9f8   (1059 kB)
[    0.000000]        .bss : 0xc0c8e9f8 - 0xc0daca44   (1145 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[    0.000000] rkclk_init_clks: cnt_parent = 7
[    0.000000] rkclk_init_clks: cnt_rate = 31
[    0.000000] rk3288 set GPLL BW 20 for HDMI!
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 1
[    0.000000] channel:0, lkg:29
[    0.000000] target-temp:80
[    0.000000] channel:2, lkg:0
[    0.000000] target-temp:80
[    0.000000] channel:0, lkg:29
[    0.000000] target-temp:80
[    0.000000] channel:1, lkg:24
[    0.000000] target-temp:80
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.306941] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.306956] pid_max: default: 32768 minimum: 301
[    0.307059] Security Framework initialized
[    0.307076] SELinux:  Initializing.
[    0.307147] Mount-cache hash table entries: 512
[    0.307786] Initializing cgroup subsys debug
[    0.307801] Initializing cgroup subsys memory
[    0.307827] Initializing cgroup subsys freezer
[    0.307856] CPU: Testing write buffer coherency: ok
[    0.308163] /cpus/cpu@0 missing clock-frequency property
[    0.308175] /cpus/cpu@1 missing clock-frequency property
[    0.308184] /cpus/cpu@2 missing clock-frequency property
[    0.308193] /cpus/cpu@3 missing clock-frequency property
[    0.308252] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.308303] Setting up static identity map for 0xc07df888 - 0xc07df8e0
[    0.310707] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x173f (version 3.0)
[    0.385057] CPU1: Booted secondary processor
[    0.385089] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.404740] CPU2: Booted secondary processor
[    0.404764] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.424455] CPU3: Booted secondary processor
[    0.424479] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.424579] Brought up 4 CPUs
[    0.424609] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.424618] CPU: All CPU(s) started in SVC mode.
[    0.425349] devtmpfs: initialized
[    0.430422] pinctrl core: initialized pinctrl subsystem
[    0.430667] regulator-dummy: no parameters
[    0.442054] NET: Registered protocol family 16
[    0.443938] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.444228] ion_snapshot: 0x2e1b0000 map to 0xf0107000 and copy to 0xc0d88044 (version 0.1)
[    0.444575] Registered FIQ tty driver
[    0.445913] console [ttyFIQ0] enabled
[    0.446133] Registered fiq debugger ttyFIQ0
[    0.446752] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[    0.446776] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[    0.446797] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[    0.446817] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[    0.446910] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[    0.446976] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[    0.447042] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[    0.447106] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[    0.447171] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[    0.447235] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[    0.447306] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[    0.447374] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[    0.447446] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[    0.447515] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[    0.447531] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[    0.447546] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[    0.447561] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[    0.448066] rockchip_interrupts_register:bank_num=7
[    0.449985] rockchip_pinctrl_probe:init ok
[    0.455946] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.456039] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.456055] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.456226] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.456297] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.456312] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.456469] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.456538] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.456553] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.456723] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[    0.456795] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.456810] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.456976] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.457050] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.457065] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.457231] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.457304] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.457319] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.457505] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.457579] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.457594] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[    0.459195] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.459212] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.459420] DDR DEBUG: version 1.00 20140603
[    0.459452] DDR DEBUG: Channel a:
[    0.459462] DDR DEBUG: DDR3 Device
[    0.459478] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.459491] DDR DEBUG: Channel b:
[    0.459499] DDR DEBUG: DDR3 Device
[    0.459513] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.459525] DDR DEBUG: addr=0xc96000
[    0.459536] DDR DEBUG: stride=9, size=256, halfcap=40000000
[    0.459547] DDR DEBUG: socAddr[0]=0xc96000, socAddr[1]=0xc96100
[    0.459559] DDR DEBUG: chAddr[0]=0xc96000, chAddr[1]=0xc96000
[    0.459572] DDR DEBUG: dtar[0]=0x60192000, dtar[1]=0x60192000
[    0.459817] DDR DEBUG: init success!!! freq=300MHz
[    0.459828] DDR DEBUG: Channel a:
[    0.459842] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459858] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459875] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459891] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459906] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.459918] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.459930] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.459939] DDR DEBUG: Channel b:
[    0.459952] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459968] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459985] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.460001] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.460015] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.460028] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.460038] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.482160] bio: create slab <bio-0> at 0
[    0.483015] SCSI subsystem initialized
[    0.483162] usbcore: registered new interface driver usbfs
[    0.483207] usbcore: registered new interface driver hub
[    0.483311] usbcore: registered new device driver usb
[    0.484679] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.486854] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.488354] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.489317] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[    0.489563] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.490049] media: Linux media interface: v0.10
[    0.490091] Linux video capture interface: v2.00
[    0.490137] pps_core: LinuxPPS API ver. 1 registered
[    0.490148] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.490172] PTP clock support registered
[    0.490648] Rockchip ion module is successfully loaded (v1.0)
[    0.490805] Advanced Linux Sound Architecture Driver Initialized.
[    0.491176] Bluetooth: Core ver 2.16
[    0.491213] NET: Registered protocol family 31
[    0.491225] Bluetooth: HCI device and connection manager initialized
[    0.491243] Bluetooth: HCI socket layer initialized
[    0.491258] Bluetooth: L2CAP socket layer initialized
[    0.491285] Bluetooth: SCO socket layer initialized
[    0.491517] cfg80211: Calling CRDA to update world regulatory domain
[    0.492150] act8846_i2c_probe,line=898
[    0.493122] act8846_parse_dt,line=746
[    0.493815] act8846_i2c_probe: act8846_pmic_hold=1
[    0.493837] act8846_i2c_probe: act8846_pmic_sleep=1
[    0.493854] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
[    0.493871] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
[    0.495698] act_dcdc1: 1200 mV
[    0.498415] vccio: 3300 mV
[    0.500279] vdd_logic: 700 <--> 1500 mV at 1100 mV
[    0.502980] act_dcdc4: 2000 mV
[    0.504227] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[    0.506295] act_ldo2: 1000 mV
[    0.508367] act_ldo3: 3300 mV
[    0.510439] act_ldo4: 3300 mV
[    0.512516] act_ldo5: 3300 mV
[    0.514600] act_ldo6: 1000 mV
[    0.516678] vcc_18: 1800 mV
[    0.518749] act_ldo8: 1800 mV
[    0.523522] vdd_arm: 712 <--> 1500 mV at 1000 mV
[    0.528215] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[    0.529061] Switching to clocksource arch_sys_counter
[    0.549354] rk-fb rockchip-fb: rk fb ion client create success!
[    0.549372] rk-fb rockchip-fb: rockchip framebuffer driver probe
[    0.549755] rk-screen rk_screen.9: rockchip screen probe success
[    0.550012] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[    0.550335] rk32-edp ff970000.edp: screen is not edp!
[    0.550356] rk32-edp: probe of ff970000.edp failed with error -22
[    0.551063] graphics fb0: rockchip framebuffer registerd:fb0
[    0.551411] graphics fb1: rockchip framebuffer registerd:fb1
[    0.551577] graphics fb2: rockchip framebuffer registerd:fb2
[    0.551729] graphics fb3: rockchip framebuffer registerd:fb3
[    0.562277] rk3288-lcdc lcdc0: lcdc0: dclk:50000000>>fps:59
[    0.562301] rk3288-lcdc lcdc0: wakeup from standby!
[    0.575868] alloc_buffer:ion_phy_addr=0x40000000
[    0.580965] fb0:phy:40000000>>vir:f0171000>>len:0xa00000
[    0.584513] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
[    0.584671] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[    0.584687] rk_fb_trsm_ops_get:un supported transmitter:0!
[    0.584887] graphics fb4: rockchip framebuffer registerd:fb4
[    0.585187] graphics fb5: rockchip framebuffer registerd:fb5
[    0.585344] graphics fb6: rockchip framebuffer registerd:fb6
[    0.585497] graphics fb7: rockchip framebuffer registerd:fb7
[    0.585514] fb0:phy:40000000>>vir:f0171000>>len:0xa00000
[    0.585528] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
[    0.586110] rockchip_set_mux:warning ignore bank num 15
[    0.586233] rockchip_set_mux:warning ignore bank num 15
[    0.586341] rockchip_set_mux:warning ignore bank num 15
[    0.586455] rockchip_set_mux:warning ignore bank num 15
[    0.586564] rockchip_set_mux:warning ignore bank num 15
[    0.586672] rockchip_set_mux:warning ignore bank num 15
[    0.587239] rockchip_set_mux:warning ignore bank num 15
[    0.587386] rockchip_set_mux:warning ignore bank num 15
[    0.587934] rockchip_set_mux:warning ignore bank num 15
[    0.588070] rockchip_set_mux:warning ignore bank num 15
[    0.588625] rockchip_set_mux:warning ignore bank num 15
[    0.588787] rockchip_set_mux:warning ignore bank num 15
[    0.589339] rockchip_set_mux:warning ignore bank num 15
[    0.589481] rockchip_set_mux:warning ignore bank num 15
[    0.590520] rk_battery_charger_detect_cb , battery_charger_detect 1
[    0.590745] NET: Registered protocol family 2
[    0.591198] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.591337] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.591474] TCP: Hash tables configured (established 8192 bind 8192)
[    0.591523] TCP: reno registered
[    0.591538] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.591575] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.591769] NET: Registered protocol family 1
[    0.591942] Unpacking initramfs...
[    0.755235] Freeing initrd memory: 3920K (c4bf0000 - c4fc4000)
[    0.755931] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    0.756402] probe device ff9a0000.vpu_service
[    0.756578] vpu_service: power on
[    0.757637] checking hw id 4831
[    0.758027] vpu_service set to auto frequency mode
[    0.758064] vpu_service: power off...
[    0.758102] done
[    0.758111] init success
[    0.758164] probe device ff9c0000.hevc_service
[    0.758359] hevc_service: power on
[    0.759396] checking hw id 6867
[    0.759618] hevc_service: power off...
[    0.759657] done
[    0.759666] init success
[    0.759774] rknandbase v1.0 2014-03-31
[    0.759877] rknand ff400000.nandc0: no irq resource?
[    0.760000] rknand_driver:ret = 0
[    0.760751] audit: initializing netlink socket (disabled)
[    0.760791] type=2000 audit(0.450:1): initialized
[    0.761532] bounce pool size: 64 pages
[    0.765946] fuse init (API version 7.22)
[    0.766290] msgmni has been set to 1450
[    0.767999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.768018] io scheduler noop registered
[    0.768029] io scheduler deadline registered
[    0.768115] io scheduler cfq registered (default)
[    0.771610] rga2 ff920000.rga: rga ion client create success!
[    0.771753] rga: Driver loaded succesfully
[    0.772359] IEP Driver loaded succesfully
[    0.772449] Module initialized.
[    0.773300] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    0.773320] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    0.774585] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    0.774605] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.774873] pwm-voltage-regulator pwm_regulator.25: unable to request PWM, trying legacy API
[    0.774892] pwm-voltage-regulator pwm_regulator.25: unable to request legacy PWM
[    0.774904] pwm_regulator_probe:error
[    0.774926] platform pwm_regulator.25: Driver pwm-voltage-regulator requests probe deferral
[    0.775283] rk_serial.c v1.8 2014-03-04
[    0.775499] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    0.775698] serial ff180000.serial: membase f0b94000
[    0.778366] loop: module loaded
[    0.778918] SCSI Media Changer driver v0.25
[    0.779215] tun: Universal TUN/TAP device driver, 1.6
[    0.779229] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.779345] vmac_init.
[    0.779851] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    0.779867] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[    0.779881] stmmac_probe_config_dt: clock input or output? (input).
[    0.779894] stmmac_probe_config_dt: TX delay(0x30).
[    0.779905] stmmac_probe_config_dt: RX delay(0x10).
[    0.779952] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    0.779963] stmmc_pltfr_init:
[    0.779982] stmmc_pltfr_init: init for RGMII
[    0.779995] tx delay=0x30
[    0.779995] rx delay=0x10
[    0.780440] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    0.780452]  Normal descriptors
[    0.780461]  Ring mode enabled
[    0.780470]  DMA HW capability register supported
[    0.780482]  RX Checksum Offload Engine supported (type 2)
[    0.780493]  TX Checksum insertion supported
[    0.780502]  Wake-Up On Lan supported
[    0.780538]  Enable RX Mitigation via HW Watchdog Timer
[    0.780943] PPP generic driver version 2.4.2
[    0.781098] PPP BSD Compression module registered
[    0.781112] PPP Deflate Compression module registered
[    0.781134] PPP MPPE Compression module registered
[    0.781146] NET: Registered protocol family 24
[    0.781179] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    0.781193] CSLIP: code copyright 1989 Regents of the University of California.
[    0.781206] Rockchip WiFi SYS interface (V1.00) ...
[    0.781237] esp_mem_init enter date Mar 30 2015 17:18:35
[    0.781279] esp_mem_init complete
[    0.781349] usbcore: registered new interface driver catc
[    0.781388] usbcore: registered new interface driver kaweth
[    0.781401] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    0.781439] usbcore: registered new interface driver pegasus
[    0.781476] usbcore: registered new interface driver rtl8150
[    0.781513] usbcore: registered new interface driver r8152
[    0.781525] hso: drivers/net/usb/hso.c: Option Wireless
[    0.781592] usbcore: registered new interface driver hso
[    0.781648] usbcore: registered new interface driver asix
[    0.781689] usbcore: registered new interface driver ax88179_178a
[    0.781726] usbcore: registered new interface driver cdc_ether
[    0.781764] usbcore: registered new interface driver cdc_eem
[    0.781801] usbcore: registered new interface driver dm9601
[    0.781837] usbcore: registered new interface driver dm9620
[    0.781883] usbcore: registered new interface driver smsc75xx
[    0.781934] usbcore: registered new interface driver smsc95xx
[    0.781973] usbcore: registered new interface driver gl620a
[    0.782010] usbcore: registered new interface driver net1080
[    0.782047] usbcore: registered new interface driver plusb
[    0.782085] usbcore: registered new interface driver rndis_host
[    0.782123] usbcore: registered new interface driver cdc_subset
[    0.782159] usbcore: registered new interface driver zaurus
[    0.782203] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    0.782259] usbcore: registered new interface driver int51x1
[    0.782298] usbcore: registered new interface driver kalmia
[    0.782336] usbcore: registered new interface driver ipheth
[    0.782378] usbcore: registered new interface driver sierra_net
[    0.782418] usbcore: registered new interface driver cx82310_eth
[    0.782469] usbcore: registered new interface driver cdc_ncm
[    0.782510] usbcore: registered new interface driver qmi_wwan
[    0.782550] usbcore: registered new interface driver cdc_mbim
[    0.782562] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.784937] ehci_rk_probe f0c00000 f0c00010
[    0.784989] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
[    0.785022] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    0.785360] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    0.804656] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[    0.804731] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.804749] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.804764] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[    0.804778] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    0.804791] usb usb1: SerialNumber: ff500000.usb
[    0.805205] hub 1-0:1.0: USB hub found
[    0.805229] hub 1-0:1.0: 1 port detected
[    0.834169] ehci_rk_probe ok
[    0.834313] usbcore: registered new interface driver cdc_acm
[    0.834327] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.834380] usbcore: registered new interface driver usblp
[    0.834422] usbcore: registered new interface driver cdc_wdm
[    0.834487] usbcore: registered new interface driver usb-storage
[    0.834527] usbcore: registered new interface driver ums-alauda
[    0.834565] usbcore: registered new interface driver ums-cypress
[    0.834603] usbcore: registered new interface driver ums-datafab
[    0.834639] usbcore: registered new interface driver ums_eneub6250
[    0.834676] usbcore: registered new interface driver ums-freecom
[    0.834713] usbcore: registered new interface driver ums-isd200
[    0.834751] usbcore: registered new interface driver ums-jumpshot
[    0.834788] usbcore: registered new interface driver ums-karma
[    0.834825] usbcore: registered new interface driver ums-onetouch
[    0.834863] usbcore: registered new interface driver ums-sddr09
[    0.834919] usbcore: registered new interface driver ums-sddr55
[    0.834959] usbcore: registered new interface driver ums-usbat
[    0.835046] usbcore: registered new interface driver usbserial
[    0.835085] usbcore: registered new interface driver usbserial_generic
[    0.835116] usbserial: USB Serial support registered for generic
[    0.835153] usbcore: registered new interface driver option
[    0.835181] usbserial: USB Serial support registered for GSM modem (1-port)
[    0.835252] usbcore: registered new interface driver trancevibrator
[    0.835266] usb20_otg: version 3.10a 21-DEC-2012
[    0.835648] f0c80040
[    0.835661] Core Release: 3.10a
[    0.835672] Setting default values for core params
[    0.835781] Using Buffer DMA mode
[    0.835793] Periodic Transfer Interrupt Enhancement - disabled
[    0.835804] Multiprocessor Interrupt Enhancement - disabled
[    0.835816] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.835826] ^^^^^^^^^^^^^^^^^Device Mode
[    0.835839] Dedicated Tx FIFOs mode
[    0.835862] pcd_init otg_dev = ed67f280
[    0.835990] usb20_otg ff580000.usb: DWC OTG Controller
[    0.836016] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    0.836046] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    0.836100] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.836117] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.836132] usb usb2: Product: DWC OTG Controller
[    0.836145] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    0.836158] usb usb2: SerialNumber: ff580000.usb
[    0.836517] hub 2-0:1.0: USB hub found
[    0.836541] hub 2-0:1.0: 1 port detected
[    0.836825] usb20_host: version 3.10a 21-DEC-2012
[    0.839277] f0d00040
[    0.839289] Core Release: 3.10a
[    0.839300] Setting default values for core params
[    0.839400] Using Buffer DMA mode
[    0.839412] Periodic Transfer Interrupt Enhancement - disabled
[    0.839423] Multiprocessor Interrupt Enhancement - disabled
[    0.839434] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.839445] ^^^^^^^^^^^^^^^^^^Host Mode
[    0.839467] usb20_host ff540000.usb: DWC OTG Controller
[    0.839492] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    0.839520] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    0.839612] Init: Power Port (0)
[    0.839663] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.839680] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.839694] usb usb3: Product: DWC OTG Controller
[    0.839707] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    0.839720] usb usb3: SerialNumber: ff540000.usb
[    0.840070] hub 3-0:1.0: USB hub found
[    0.840091] hub 3-0:1.0: 1 port detected
[    0.840596] .. rk pwm remotectl v1.0 init
[    0.840678] remotectl probe j=0x0
[    0.840821] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[    0.840990] pwm enable val=0x646205
[    0.841242] usbcore: registered new interface driver xpad
[    0.841295] usbcore: registered new interface driver usb_acecad
[    0.841340] usbcore: registered new interface driver aiptek
[    0.841383] usbcore: registered new interface driver gtco
[    0.841426] usbcore: registered new interface driver hanwang
[    0.841468] usbcore: registered new interface driver kbtab
[    0.841517] usbcore: registered new interface driver wacom
[    0.841528] ==gsl_ts_init==
[    0.841618] GSLX680 Enter gsl_ts_probe
[    0.932610] dwc_otg_hcd_suspend, usb device mode
[    1.158882] gsl_ts_probe--1269, i2c_master_recv fail
[    1.158904] gslX680: probe of 1-0041 failed with error -11
[    1.158969] ret=0
[    1.163927] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    1.163987] i2c /dev entries driver
[    1.164657] IR NEC protocol handler initialized
[    1.164671] IR RC5(x) protocol handler initialized
[    1.164681] IR RC6 protocol handler initialized
[    1.164691] IR JVC protocol handler initialized
[    1.164701] IR Sony protocol handler initialized
[    1.164711] IR RC5 (streamzap) protocol handler initialized
[    1.164721] IR SANYO protocol handler initialized
[    1.164731] IR MCE Keyboard/mouse protocol handler initialized
[    1.164869] usbcore: registered new interface driver uvcvideo
[    1.164881] USB Video Class driver (1.1.1)
[    1.164894] CamSys driver version: v0.23.0,  CamSys head file version: v0.9.0
[    1.166285] D1:camsys_platform_probe(1067): 1-gpios-cifpowerï¼?gpio=-2
[    1.166365] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[    1.166506] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xf0ba8000  size: 0x4000)
[    1.167141] D1:camsys_platform_probe(1183): ff910000.isp memory:
[    1.167160] D1:camsys_platform_probe(1193):     Register memory (phy: 0xff910000 vir: 0xf0be0000 size: 0x10000)
[    1.167176] D1:camsys_platform_probe(1188):     I2c memory (phy: 0x2d9b2000 vir: 0xed9b2000 size: 0x1000)
[    1.167192] D1:camsys_platform_probe(1208): Probe ff910000.isp device success
[    1.168483] device-mapper: uevent: version 1.0.3
[    1.168723] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.169039] Bluetooth: HCI UART driver ver 2.2
[    1.169054] Bluetooth: HCI H4 protocol initialized
[    1.169066] Bluetooth: HCILL protocol initialized
[    1.172130] cpufreq version 1.0, suspend freq 1200 MHz
[    1.172320] cpuidle: using governor ladder
[    1.172333] cpuidle: using governor menu
[    1.172368] Synopsys Designware Multimedia Card Interface Driver
[    1.172602] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    1.172876] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[    1.173030] 3379..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[    1.173045] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    1.173158] 1390..dw_mci_set_ios:  no card. [mmc0]
[    1.188422] 1390..dw_mci_set_ios:  no card. [mmc0]
[    1.208117] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    1.208141] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    1.208161] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    1.208428] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    1.209257] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    1.209498] 3379..dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc1]
[    1.209512] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    1.209571] mmc1: no vmmc regulator found
[    1.209669] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[    1.209750] 1390..dw_mci_set_ios:  no card. [mmc1]
[    1.227767] 1390..dw_mci_set_ios:  no card. [mmc1]
[    1.240228] mmc0: BKOPS_EN bit is not set
[    1.242116] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[    1.242138] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    1.242188] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
[    1.242289] mmc0: new high speed MMC card at address 0001
[    1.242531] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
[    1.242806]  parameter: 0x000000000 -- 0x000400000 (4 MB)
[    1.242818]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    1.242827]       misc: 0x000800000 -- 0x000c00000 (4 MB)
[    1.242836]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    1.242846]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[    1.242854]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
[    1.242863]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[    1.242871]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
[    1.242879]      cache: 0x00a000000 -- 0x012000000 (128 MB)
[    1.242888]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
[    1.242897]     system: 0x012400000 -- 0x042400000 (768 MB)
[    1.242905]   metadata: 0x042400000 -- 0x042800000 (4 MB)
[    1.242914]   userdata: 0x042800000 -- 0x082800000 (1024 MB)
[    1.242922] radical_update: 0x082800000 -- 0x086800000 (64 MB)
[    1.242932]       user: 0x086800000 -- 0x3a3a00000 (12754 MB)
[    1.242956]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p151390..dw_mci_set_ios:  no card. [mmc1]
[    1.247476] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    1.247489] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[    1.247752] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    1.247945] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    1.248057] 3379..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    1.248067] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    1.248319] 1390..dw_mci_set_ios:  no card. [mmc2]
[    1.267119] 1390..dw_mci_set_ios:  no card. [mmc2]
[    1.286830] 1390..dw_mci_set_ios:  no card. [mmc2]
[    1.286839] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    1.286846] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    1.287072] hidraw: raw HID events driver (C) Jiri Kosina
[    1.288403] usbcore: registered new interface driver usbhid
[    1.288413] usbhid: USB HID core driver
[    1.288686] zram: Created 1 device(s) ...
[    1.288949] ashmem: initialized
[    1.289061] logger: created 256K log 'log_main'
[    1.289153] logger: created 256K log 'log_events'
[    1.289243] logger: created 256K log 'log_radio'
[    1.289338] logger: created 256K log 'log_system'
[    1.290359] input: rk29-keypad as /devices/ff100000.adc/key.37/input/input1
[    1.291130] es8323 probe i2c recv ok
[    1.291203] i2c-core: driver [ES8323] using legacy suspend method
[    1.291212] i2c-core: driver [ES8323] using legacy resume method
[    1.291965] rockchip-hdmi-spdif rockchip-hdmi-spdif.29: ASoC: CPU DAI (null) not registered
[    1.291994] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    1.292012] platform rockchip-hdmi-spdif.29: Driver rockchip-hdmi-spdif requests probe deferral
[    1.292248] es8323_probe
[    1.926772] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
[    1.926783] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
[    1.926793] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
[    1.926802] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
[    1.926811] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
[    1.926819] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
[    1.926828] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
[    1.926836] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
[    1.926846] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
[    1.926854] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
[    1.926863] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
[    1.926870] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
[    1.926880] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
[    1.926887] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
[    1.926896] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
[    1.926903] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
[    1.926912] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
[    1.926920] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
[    1.926929] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
[    1.926936] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
[    1.926945] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
[    1.926953] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
[    1.926962] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
[    1.926969] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
[    1.926979] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
[    1.926987] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
[    1.926996] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
[    1.927004] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
[    1.927012] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
[    1.927020] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
[    1.927029] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
[    1.927036] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
[    1.927055] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
[    1.927062] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
[    1.927071] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
[    1.927079] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
[    1.927087] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
[    1.927095] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
[    1.927104] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
[    1.927112] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
[    1.927120] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
[    1.927128] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
[    1.927136] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
[    1.927144] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
[    1.927258] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
[    1.927269] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
[    1.927279] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
[    1.927288] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
[    1.927306] ES8323 2-0010: ASoC: mux Differential Mux has no paths
[    1.930563] rockchip-es8323 rockchip-es8323.31:  ES8323 HiFi <-> rockchip-i2s.0 mapping ok
[    1.930887] input: RK_ES8323 Headphone Jack as /devices/rockchip-es8323.31/sound/card0/input2
[    1.931538] rockchip-hdmi-i2s rockchip-hdmi-i2s.28:  rk-hdmi-i2s-hifi <-> rockchip-i2s.0 mapping ok
[    1.931826] u32 classifier
[    1.931832]     Actions configured
[    1.931841] Netfilter messages via NETLINK v0.30.
[    1.931883] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.932126] ctnetlink v0.93: registering with nfnetlink.
[    1.932177] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    1.932184] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    1.932381] xt_time: kernel timezone is -0000
[    1.932533] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.932635] arp_tables: (C) 2002 David S. Miller
[    1.932666] TCP: cubic registered
[    1.932672] Initializing XFRM netlink socket
[    1.932837] NET: Registered protocol family 10
[    1.933240] mip6: Mobile IPv6
[    1.933261] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.933352] sit: IPv6 over IPv4 tunneling driver
[    1.933602] NET: Registered protocol family 17
[    1.933621] NET: Registered protocol family 15
[    1.933662] Bridge firewalling registered
[    1.933672] Ebtables v2.0 registered
[    1.933792] Bluetooth: RFCOMM TTY layer initialized
[    1.933812] Bluetooth: RFCOMM socket layer initialized
[    1.933819] Bluetooth: RFCOMM ver 1.11
[    1.933826] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.933831] Bluetooth: BNEP filters: protocol multicast
[    1.933841] Bluetooth: BNEP socket layer initialized
[    1.933847] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.933856] Bluetooth: HIDP socket layer initialized
[    1.933875] l2tp_core: L2TP core driver, V2.0
[    1.933885] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.933891] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.934027] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.934037] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[    1.934044] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.934052] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    1.934059] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.934076] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[    1.934094] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    1.934101] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.934120] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[    1.934155] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    1.934192] [BT_RFKILL]: Enter rfkill_rk_init
[    1.934295] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[    1.934310] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
[    1.934322] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[    1.934334] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[    1.934346] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[    1.934383] [BT_RFKILL]: Request irq for bt wakeup host
[    1.934459] [BT_RFKILL]: ** disable irq
[    1.934520] [BT_RFKILL]: ap6335 device registered.
[    1.935332] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
[    1.936017] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    1.936032] rk3288_init_suspend
[    1.936038] rk3288_suspend_init enter
[    1.936140] rk3288_suspend_init: pm_ctrbits =200007
[    1.936165] gpio_get_dts_info suspend:4
[    1.936171] gpio_get_dts_info resume:4
[    1.936176] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    1.936201] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    1.936344] clks_gating_suspend_init:clkgt info ok
[    1.936423] Registering SWP/SWPB emulation handler
[    1.936701] ddrfreq: verion 1.2 20140526
[    1.936710] ddrfreq: normal 396MHz video_1080p 240MHz video_4k 396MHz dualview 396MHz idle 0MHz suspend 200MHz reboot 396MHz
[    1.936718] ddrfreq: auto-freq=0
[    1.936723] ddrfreq: auto-freq-table[0] 240MHz
[    1.936728] ddrfreq: auto-freq-table[1] 324MHz
[    1.936734] ddrfreq: auto-freq-table[2] 396MHz
[    1.936739] ddrfreq: auto-freq-table[3] 528MHz
[    1.947332] regulator-dummy: disabling
[    1.947653] rockchip-hdmi-spdif rockchip-hdmi-spdif.29: ASoC: CPU DAI (null) not registered
[    1.947677] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    1.947690] platform rockchip-hdmi-spdif.29: Driver rockchip-hdmi-spdif requests probe deferral
[    1.947783] pcd_pullup, is_on 0
[    1.947819] file system registered
[    1.948340] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    1.948349] android_usb gadget: Number of LUNs=2
[    1.948356]  lun0: LUN: removable file: (no medium)
[    1.948362]  lun1: LUN: removable file: (no medium)
[    1.948474] android_usb gadget: android_usb ready
[    1.949006] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:03:21 UTC (1293883401)
[    1.953456] rk_spdif:rk_spdif_init
[    1.953622] rk_spdif:Entered spdif_probe
[    1.953800] rk_spdif:spdif:spdif probe ok!
[    1.954281] usbcore: registered new interface driver snd-usb-audio
[    1.954290] ALSA device list:
[    1.954295]   #0: RK_ES8323
[    1.954300]   #1: RK-HDMI-I2S
[    1.954468] rockchip-hdmi-spdif rockchip-hdmi-spdif.29:  rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
[    1.954652] Freeing unused kernel memory: 592K (c0af1000 - c0b85000)
[    1.959089] SELinux:  Permission attach_queue in class tun_socket not defined in policy.
[    1.959103] SELinux: the above unknown classes and permissions will be denied
[    2.303326] type=1403 audit(1293883401.850:2): policy loaded auid=4294967295 ses=4294967295
[    2.303429] SELinux: Loaded policy from /sepolicy
[    2.304877] type=1404 audit(1293883401.850:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.812003] dwc_otg_hcd_enable, enable host controller
[    2.935360] Using Buffer DMA mode
[    2.935371] Periodic Transfer Interrupt Enhancement - disabled
[    2.935377] Multiprocessor Interrupt Enhancement - disabled
[    2.935384] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.935389] ^^^^^^^^^^^^^^^^^^Host Mode
[    2.979364] Init: Power Port (0)
[    2.979406] ff540000.usb resume, HPRT0:0x21401
[    3.117096] Indeed it is in host mode hprt0 = 00021501
[    3.294199] usb 3-1: new high-speed USB device number 2 using usb20_host
[    3.294280] Indeed it is in host mode hprt0 = 00001101
[    3.387077] init: /dev/hw_random not found
[    3.388239] type=1400 audit(1293883402.950:4): avc:  denied  { mount } for  pid=1 comm="init" name="/" dev="functionfs" ino=2237 scontext=u:r:kernel:s0 tcontext=u:object_r:unlabeled:s0 tclass=filesystem permissive=1
[    3.388327] android_usb: already disabled
[    3.388449] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    3.388459] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    3.388550] drmboot: module license 'unspecified' taints kernel.
[    3.388558] Disabling lock debugging due to kernel taint
[    3.389317] %s: ok, 20130810
[    3.491187] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
[    3.491199] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.491208] usb 3-1: Product: USB 2.0 Hub [MTT]
[    3.491531] hub 3-1:1.0: USB hub found
[    3.491581] hub 3-1:1.0: 4 ports detected
[    3.609059] ff540000.usb suspend, HPRT0:0x1485
[    8.186578] init: /sbin/e2fsck terminated by exit(8)
ount /let/blocfoundtform/emic_by-natzdcachecouormat find aext4 dat/block/platf co/emmct f-nd a/caczde'
[    8.1king ] initT /devbio_randpennot fou: c
:27   8.1901dli andonsd_usb: FIQeady roidbled [    t f8nd 6] inzda Unabee tookpen forsistentuleop
[ dwa8.19030bo rd t: usidb deprecaole syntIQ0foraspecp_hang pro=ertyit=o.pro  mt.manufark2rer', d:0 000ame} @0xtead
[  par.1903r), x00t: u00@g dep020at(ubsynta0x0or speci0xing 400perisc'ro.p000uct.m0del006use $esome} instea008[    80190e00] initel),in0 depr00@ted s160ax boo spex00ying p@0x0rty 000.secovlno',0x0e ${000e0x0nste000
                                                                                                                                                                                                                      [    8.19x006] in0@0 00sys   8.0x0428] 0nitx00annot0(mpand '$r,0xerialn00@0h002 writ(us to '/sysx00ass/a0@0o0d414b/andadic0/iuprial',-@    834010(u] reastoescriptor=em[    ade9.ti1] ramp stri-02
6_1  8.113 79] pcd_p-1 up, oidooot
erialno=100612000000033C androidboot.mode=emmc

cmdline=console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user) storagemedia=emmc loader.timestamp=2015-02-26_14:42:13 hdmi.vic=-1 androidboot.serialno=100612000000033C androidboot.mode=emmc

bootmode = emmc
recovery filesystem table
=========================
  0 /mnt/internal_sd vfat /dev/block/platform/ff0f0000.rksdmmc/by-name/user 0
  1 /mnt/external_sd vfat /dev/block/mmcblk1p1 0
  2 /system ext4 /dev/block/platform/ff0f0000.rksdmmc/by-name/system 0
  3 /cache ext4 /dev/block/platform/ff0f0000.rksdmmc/by-name/cache 0
  4 /metadata ext4 /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata 0
  5 /data ext4 /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata 0
  6 /cust ext4 /dev/block/platform/ff0f0000.rksdmmc/by-name/cust 0
  7 /custom ext4 /dev/block/platform/ff0f0000.rksdmmc/by-name/custom 0
  8 /radical_update ext4 /dev/block/platform/ff0f0000.rksdmmc/by-name/radical_update 0
  9 /misc emmc /dev/block/platform/ff0f0000.rksdmmc/by-name/misc 0
  10 /uboot emmc /dev/block/platform/ff0f0000.rksdmmc/by-name/uboot 0
  11 /charge emmc /dev/block/platform/ff0f0000.rksdmmc/by-name/charge 0
  12 /resource emmc /dev/block/platform/ff0f0000.rksdmmc/by-name/resource 0
  13 /parameter emmc /dev/block/platform/ff0f0000.rksdmmc/by-name/parameter 0
  14 /boot emmc /dev/block/platform/ff0f0000.rksdmmc/by-name/boot 0
  15 /recovery emmc /dev/block/platform/ff0f0000.rksdmmc/by-name/recovery 0
  16 /backup emmc /dev/block/platform/ff0f0000.rksdmmc/by-name/backup 0
  17 /tmp ramdisk ramdisk 0

I/ [File] : bootable/recovery/recovery.cpp; [Line] : 1577; [Func] : void SetSdcardRootPath(); InternalSD_ROOT: /mnt/internal_sd
I/ [File] : bootable/recovery/recovery.cpp; [Line] : 1579; [Func] : void SetSdcardRootPath(); ExternalSD_ROOT: /mnt/external_sd
failed to create /cache dir,err=File exists!
[    8.489495] EXT4-fs (mmcblk0p9): recovery complete
failed to read font: res=-1
can't open /dev/tty0: No such file or directory
framebuffer: fd 7 (1024 x 768)
sh: applet not found
sh: applet not found
请问是怎么回事?为什么修改dts后,不能进recovery????
3、将2中,dts中&hdmi status=“okay”改为status = “disabled”,按照1中进行烧写,系统能正常进入recovery和重新系统,正常进入系统。
  我需要hdmi输出,请问怎么解决这个问题。

作者: iamguanle    时间: 2015-4-28 16:18
我也遇到同样的问题,求版主解释.
作者: zhansb    时间: 2015-4-28 18:58
parameter没看到更新啊
[    0.000000] Kernel command line: console=ttyFIQ0 androidboot.hardware=rk30board androidboot.console=ttyFIQ0 board.ap_has_alsa=0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user) storagemedia=emmc loader.timestamp=2015-02-26_14:42:13 hdmi.vic=-1 androidboot.serialno=100612000000033C
作者: sulq23    时间: 2015-4-29 09:10
版主,稍后我贴上更换parameter的打印信息,现象是一样的。
作者: sulq23    时间: 2015-4-29 16:31
这个更改parameter的打印信息
DDR Version 1.00 20141007
In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT


U-Boot 2014.10-RK3288-02 (Feb 26 2015 - 14:42:13)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 300000000HZ
    ddr pll = 200000000HZ
    codec pll = 594000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
failed to prepare fdt from boot!
power key: bank-0 pin-5
pmic:act8846
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2015-02-26#2.17
sn:100612000000033C
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
got recovery cmd from misc.
failed to load fdt from recovery!
kernel   @ 0x02000000 (0x0065a630)
ramdisk  @ 0x04bf0000 (0x003d4b94)
Secure Boot state: 0
bootrk: do_bootm_linux...
   Loading Device Tree to 04809000, end 04826a45 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

<hit enter to activate fiq debugger>
[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (smdt@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 30 17:19:27 CST 2015
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] hdmi init vic is -1
[    0.000000] rockchip_ion_reserve
[    0.000000] ion heap(cma): base(40000000) size(28000000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 640 MiB at 40000000
[    0.000000] ion_reserve: cma reserved base 40000000 size 671088640
[    0.000000] cma: CMA: reserved 16 MiB at 2e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1dea000 s14016 r8192 d14656 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[    0.000000] Kernel command line: console=ttyS2 earlyprintk androidboot.hardware=rk30board androidboot.console=ttyS2 board.ap_has_alsa=0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user) storagemedia=emmc loader.timestamp=2015-02-26_14:42:13 hdmi.vic=-1 androidboot.serialno=100612000000033C
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 1385668k/1385668k available, 711484k reserved, 663552K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0af0514   (11170 kB)
[    0.000000]       .init : 0xc0af1000 - 0xc0b856c0   ( 594 kB)
[    0.000000]       .data : 0xc0b86000 - 0xc0c8e9f8   (1059 kB)
[    0.000000]        .bss : 0xc0c8e9f8 - 0xc0daca44   (1145 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[    0.000000] rkclk_init_clks: cnt_parent = 7
[    0.000000] rkclk_init_clks: cnt_rate = 31
[    0.000000] rk3288 set GPLL BW 20 for HDMI!
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 1
[    0.000000] channel:0, lkg:29
[    0.000000] target-temp:80
[    0.000000] channel:2, lkg:0
[    0.000000] target-temp:80
[    0.000000] channel:0, lkg:29
[    0.000000] target-temp:80
[    0.000000] channel:1, lkg:24
[    0.000000] target-temp:80
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.306489] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.306504] pid_max: default: 32768 minimum: 301
[    0.306608] Security Framework initialized
[    0.306625] SELinux:  Initializing.
[    0.306694] Mount-cache hash table entries: 512
[    0.307337] Initializing cgroup subsys debug
[    0.307351] Initializing cgroup subsys memory
[    0.307377] Initializing cgroup subsys freezer
[    0.307406] CPU: Testing write buffer coherency: ok
[    0.307711] /cpus/cpu@0 missing clock-frequency property
[    0.307724] /cpus/cpu@1 missing clock-frequency property
[    0.307733] /cpus/cpu@2 missing clock-frequency property
[    0.307742] /cpus/cpu@3 missing clock-frequency property
[    0.307802] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.307853] Setting up static identity map for 0xc07df888 - 0xc07df8e0
[    0.310153] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x1747 (version 3.0)
[    0.384604] CPU1: Booted secondary processor
[    0.384636] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.404290] CPU2: Booted secondary processor
[    0.404313] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.424003] CPU3: Booted secondary processor
[    0.424026] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.424127] Brought up 4 CPUs
[    0.424155] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.424164] CPU: All CPU(s) started in SVC mode.
[    0.424884] devtmpfs: initialized
[    0.430027] pinctrl core: initialized pinctrl subsystem
[    0.430275] regulator-dummy: no parameters
[    0.441653] NET: Registered protocol family 16
[    0.443594] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.443883] ion_snapshot: 0x2e1b0000 map to 0xf0107000 and copy to 0xc0d88044 (version 0.1)
[    0.444184] Registered FIQ tty driver
[    0.445512] console [ttyFIQ0] enabled
[    0.445734] Registered fiq debugger ttyFIQ0
[    0.446393] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[    0.446417] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[    0.446437] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[    0.446457] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[    0.446548] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[    0.446616] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[    0.446681] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[    0.446746] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[    0.446810] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[    0.446875] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[    0.446946] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[    0.447014] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[    0.447087] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[    0.447155] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[    0.447171] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[    0.447185] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[    0.447200] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[    0.447717] rockchip_interrupts_register:bank_num=7
[    0.449641] rockchip_pinctrl_probe:init ok
[    0.455598] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.455691] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.455708] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.455880] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.455952] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.455968] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.456126] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.456196] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.456210] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.456376] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[    0.456447] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.456462] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.456626] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.456697] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.456711] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.456875] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.456947] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.456963] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.457147] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.457220] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.457235] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[    0.458828] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.458845] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.459054] DDR DEBUG: version 1.00 20140603
[    0.459086] DDR DEBUG: Channel a:
[    0.459097] DDR DEBUG: DDR3 Device
[    0.459112] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.459124] DDR DEBUG: Channel b:
[    0.459133] DDR DEBUG: DDR3 Device
[    0.459146] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.459159] DDR DEBUG: addr=0xc96000
[    0.459169] DDR DEBUG: stride=9, size=256, halfcap=40000000
[    0.459181] DDR DEBUG: socAddr[0]=0xc96000, socAddr[1]=0xc96100
[    0.459192] DDR DEBUG: chAddr[0]=0xc96000, chAddr[1]=0xc96000
[    0.459206] DDR DEBUG: dtar[0]=0x60192000, dtar[1]=0x60192000
[    0.459454] DDR DEBUG: init success!!! freq=300MHz
[    0.459464] DDR DEBUG: Channel a:
[    0.459479] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459495] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459512] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459528] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459543] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.459556] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.459567] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.459576] DDR DEBUG: Channel b:
[    0.459589] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459605] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459621] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459638] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.459652] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.459664] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.459675] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.481837] bio: create slab <bio-0> at 0
[    0.482683] SCSI subsystem initialized
[    0.482833] usbcore: registered new interface driver usbfs
[    0.482879] usbcore: registered new interface driver hub
[    0.482967] usbcore: registered new device driver usb
[    0.484333] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.486502] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.488007] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.488964] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[    0.489213] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.489703] media: Linux media interface: v0.10
[    0.489744] Linux video capture interface: v2.00
[    0.489790] pps_core: LinuxPPS API ver. 1 registered
[    0.489802] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.489826] PTP clock support registered
[    0.490305] Rockchip ion module is successfully loaded (v1.0)
[    0.490464] Advanced Linux Sound Architecture Driver Initialized.
[    0.490837] Bluetooth: Core ver 2.16
[    0.490876] NET: Registered protocol family 31
[    0.490888] Bluetooth: HCI device and connection manager initialized
[    0.490906] Bluetooth: HCI socket layer initialized
[    0.490921] Bluetooth: L2CAP socket layer initialized
[    0.490948] Bluetooth: SCO socket layer initialized
[    0.491177] cfg80211: Calling CRDA to update world regulatory domain
[    0.491817] act8846_i2c_probe,line=898
[    0.492780] act8846_parse_dt,line=746
[    0.493472] act8846_i2c_probe: act8846_pmic_hold=1
[    0.493493] act8846_i2c_probe: act8846_pmic_sleep=1
[    0.493510] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
[    0.493528] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
[    0.495357] act_dcdc1: 1200 mV
[    0.498074] vccio: 3300 mV
[    0.499936] vdd_logic: 700 <--> 1500 mV at 1100 mV
[    0.502643] act_dcdc4: 2000 mV
[    0.503892] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[    0.505960] act_ldo2: 1000 mV
[    0.508035] act_ldo3: 3300 mV
[    0.510108] act_ldo4: 3300 mV
[    0.512186] act_ldo5: 3300 mV
[    0.514255] act_ldo6: 1000 mV
[    0.516334] vcc_18: 1800 mV
[    0.518406] act_ldo8: 1800 mV
[    0.523168] vdd_arm: 712 <--> 1500 mV at 1000 mV
[    0.527873] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[    0.528738] Switching to clocksource arch_sys_counter
[    0.548772] rk-fb rockchip-fb: rk fb ion client create success!
[    0.548789] rk-fb rockchip-fb: rockchip framebuffer driver probe
[    0.549179] rk-screen rk_screen.9: rockchip screen probe success
[    0.549435] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[    0.549764] rk32-edp ff970000.edp: screen is not edp!
[    0.549787] rk32-edp: probe of ff970000.edp failed with error -22
[    0.550489] graphics fb0: rockchip framebuffer registerd:fb0
[    0.550837] graphics fb1: rockchip framebuffer registerd:fb1
[    0.551003] graphics fb2: rockchip framebuffer registerd:fb2
[    0.551156] graphics fb3: rockchip framebuffer registerd:fb3
[    0.561706] rk3288-lcdc lcdc0: lcdc0: dclk:50000000>>fps:59
[    0.561732] rk3288-lcdc lcdc0: wakeup from standby!
[    0.575257] alloc_buffer:ion_phy_addr=0x40000000
[    0.580341] fb0:phy:40000000>>vir:f0171000>>len:0xa00000
[    0.583886] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
[    0.584044] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[    0.584060] rk_fb_trsm_ops_get:un supported transmitter:0!
[    0.584265] graphics fb4: rockchip framebuffer registerd:fb4
[    0.584559] graphics fb5: rockchip framebuffer registerd:fb5
[    0.584713] graphics fb6: rockchip framebuffer registerd:fb6
[    0.584867] graphics fb7: rockchip framebuffer registerd:fb7
[    0.584885] fb0:phy:40000000>>vir:f0171000>>len:0xa00000
[    0.584900] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
[    0.585480] rockchip_set_mux:warning ignore bank num 15
[    0.585607] rockchip_set_mux:warning ignore bank num 15
[    0.585716] rockchip_set_mux:warning ignore bank num 15
[    0.585830] rockchip_set_mux:warning ignore bank num 15
[    0.585938] rockchip_set_mux:warning ignore bank num 15
[    0.586043] rockchip_set_mux:warning ignore bank num 15
[    0.586611] rockchip_set_mux:warning ignore bank num 15
[    0.586758] rockchip_set_mux:warning ignore bank num 15
[    0.587309] rockchip_set_mux:warning ignore bank num 15
[    0.587445] rockchip_set_mux:warning ignore bank num 15
[    0.587992] rockchip_set_mux:warning ignore bank num 15
[    0.588150] rockchip_set_mux:warning ignore bank num 15
[    0.588695] rockchip_set_mux:warning ignore bank num 15
[    0.588838] rockchip_set_mux:warning ignore bank num 15
[    0.590196] rk_battery_charger_detect_cb , battery_charger_detect 1
[    0.590373] NET: Registered protocol family 2
[    0.590827] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    0.590965] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.591102] TCP: Hash tables configured (established 8192 bind 8192)
[    0.591152] TCP: reno registered
[    0.591168] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.591204] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.591400] NET: Registered protocol family 1
[    0.591574] Unpacking initramfs...
[    0.754845] Freeing initrd memory: 3920K (c4bf0000 - c4fc4000)
[    0.755571] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    0.756037] probe device ff9a0000.vpu_service
[    0.756208] vpu_service: power on
[    0.757267] checking hw id 4831
[    0.757638] vpu_service set to auto frequency mode
[    0.757675] vpu_service: power off...
[    0.757712] done
[    0.757721] init success
[    0.757770] probe device ff9c0000.hevc_service
[    0.757970] hevc_service: power on
[    0.759006] checking hw id 6867
[    0.759219] hevc_service: power off...
[    0.759257] done
[    0.759266] init success
[    0.759379] rknandbase v1.0 2014-03-31
[    0.759481] rknand ff400000.nandc0: no irq resource?
[    0.759606] rknand_driver:ret = 0
[    0.760347] audit: initializing netlink socket (disabled)
[    0.760387] type=2000 audit(0.450:1): initialized
[    0.761129] bounce pool size: 64 pages
[    0.765609] fuse init (API version 7.22)
[    0.765957] msgmni has been set to 1450
[    0.767724] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.767743] io scheduler noop registered
[    0.767754] io scheduler deadline registered
[    0.767838] io scheduler cfq registered (default)
[    0.771338] rga2 ff920000.rga: rga ion client create success!
[    0.771483] rga: Driver loaded succesfully
[    0.772099] IEP Driver loaded succesfully
[    0.772189] Module initialized.
[    0.773041] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    0.773062] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    0.774328] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    0.774348] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.774618] pwm-voltage-regulator pwm_regulator.25: unable to request PWM, trying legacy API
[    0.774636] pwm-voltage-regulator pwm_regulator.25: unable to request legacy PWM
[    0.774647] pwm_regulator_probe:error
[    0.774669] platform pwm_regulator.25: Driver pwm-voltage-regulator requests probe deferral
[    0.775028] rk_serial.c v1.8 2014-03-04
[    0.775243] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    0.775443] serial ff180000.serial: membase f0b94000
[    0.778086] loop: module loaded
[    0.778638] SCSI Media Changer driver v0.25
[    0.778931] tun: Universal TUN/TAP device driver, 1.6
[    0.778945] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.779062] vmac_init.
[    0.779558] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    0.779574] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[    0.779588] stmmac_probe_config_dt: clock input or output? (input).
[    0.779601] stmmac_probe_config_dt: TX delay(0x30).
[    0.779613] stmmac_probe_config_dt: RX delay(0x10).
[    0.779659] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    0.779670] stmmc_pltfr_init:
[    0.779690] stmmc_pltfr_init: init for RGMII
[    0.779703] tx delay=0x30
[    0.779703] rx delay=0x10
[    0.780143] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    0.780155]  Normal descriptors
[    0.780163]  Ring mode enabled
[    0.780173]  DMA HW capability register supported
[    0.780185]  RX Checksum Offload Engine supported (type 2)
[    0.780196]  TX Checksum insertion supported
[    0.780205]  Wake-Up On Lan supported
[    0.780240]  Enable RX Mitigation via HW Watchdog Timer
[    0.780640] PPP generic driver version 2.4.2
[    0.780801] PPP BSD Compression module registered
[    0.780813] PPP Deflate Compression module registered
[    0.780834] PPP MPPE Compression module registered
[    0.780847] NET: Registered protocol family 24
[    0.780880] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    0.780893] CSLIP: code copyright 1989 Regents of the University of California.
[    0.780906] Rockchip WiFi SYS interface (V1.00) ...
[    0.780937] esp_mem_init enter date Mar 30 2015 17:18:35
[    0.780978] esp_mem_init complete
[    0.781050] usbcore: registered new interface driver catc
[    0.781088] usbcore: registered new interface driver kaweth
[    0.781101] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    0.781139] usbcore: registered new interface driver pegasus
[    0.781176] usbcore: registered new interface driver rtl8150
[    0.781214] usbcore: registered new interface driver r8152
[    0.781225] hso: drivers/net/usb/hso.c: Option Wireless
[    0.781291] usbcore: registered new interface driver hso
[    0.781348] usbcore: registered new interface driver asix
[    0.781388] usbcore: registered new interface driver ax88179_178a
[    0.781426] usbcore: registered new interface driver cdc_ether
[    0.781463] usbcore: registered new interface driver cdc_eem
[    0.781500] usbcore: registered new interface driver dm9601
[    0.781536] usbcore: registered new interface driver dm9620
[    0.781582] usbcore: registered new interface driver smsc75xx
[    0.781633] usbcore: registered new interface driver smsc95xx
[    0.781672] usbcore: registered new interface driver gl620a
[    0.781710] usbcore: registered new interface driver net1080
[    0.781747] usbcore: registered new interface driver plusb
[    0.781785] usbcore: registered new interface driver rndis_host
[    0.781823] usbcore: registered new interface driver cdc_subset
[    0.781859] usbcore: registered new interface driver zaurus
[    0.781903] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    0.781962] usbcore: registered new interface driver int51x1
[    0.782001] usbcore: registered new interface driver kalmia
[    0.782040] usbcore: registered new interface driver ipheth
[    0.782082] usbcore: registered new interface driver sierra_net
[    0.782120] usbcore: registered new interface driver cx82310_eth
[    0.782172] usbcore: registered new interface driver cdc_ncm
[    0.782213] usbcore: registered new interface driver qmi_wwan
[    0.782252] usbcore: registered new interface driver cdc_mbim
[    0.782265] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.784659] ehci_rk_probe f0c00000 f0c00010
[    0.784676] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
[    0.784706] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    0.785019] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    0.804334] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[    0.804410] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.804427] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.804442] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[    0.804457] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    0.804469] usb usb1: SerialNumber: ff500000.usb
[    0.804883] hub 1-0:1.0: USB hub found
[    0.804908] hub 1-0:1.0: 1 port detected
[    0.833846] ehci_rk_probe ok
[    0.833988] usbcore: registered new interface driver cdc_acm
[    0.834001] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.834054] usbcore: registered new interface driver usblp
[    0.834096] usbcore: registered new interface driver cdc_wdm
[    0.834167] usbcore: registered new interface driver usb-storage
[    0.834208] usbcore: registered new interface driver ums-alauda
[    0.834246] usbcore: registered new interface driver ums-cypress
[    0.834284] usbcore: registered new interface driver ums-datafab
[    0.834320] usbcore: registered new interface driver ums_eneub6250
[    0.834357] usbcore: registered new interface driver ums-freecom
[    0.834394] usbcore: registered new interface driver ums-isd200
[    0.834431] usbcore: registered new interface driver ums-jumpshot
[    0.834468] usbcore: registered new interface driver ums-karma
[    0.834505] usbcore: registered new interface driver ums-onetouch
[    0.834542] usbcore: registered new interface driver ums-sddr09
[    0.834599] usbcore: registered new interface driver ums-sddr55
[    0.834639] usbcore: registered new interface driver ums-usbat
[    0.834726] usbcore: registered new interface driver usbserial
[    0.834765] usbcore: registered new interface driver usbserial_generic
[    0.834796] usbserial: USB Serial support registered for generic
[    0.834833] usbcore: registered new interface driver option
[    0.834861] usbserial: USB Serial support registered for GSM modem (1-port)
[    0.834953] usbcore: registered new interface driver trancevibrator
[    0.834966] usb20_otg: version 3.10a 21-DEC-2012
[    0.835351] f0c80040
[    0.835364] Core Release: 3.10a
[    0.835375] Setting default values for core params
[    0.835486] Using Buffer DMA mode
[    0.835498] Periodic Transfer Interrupt Enhancement - disabled
[    0.835508] Multiprocessor Interrupt Enhancement - disabled
[    0.835521] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.835531] ^^^^^^^^^^^^^^^^^Device Mode
[    0.835544] Dedicated Tx FIFOs mode
[    0.835567] pcd_init otg_dev = ed67f280
[    0.835694] usb20_otg ff580000.usb: DWC OTG Controller
[    0.835724] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    0.835754] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    0.835808] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.835825] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.835839] usb usb2: Product: DWC OTG Controller
[    0.835852] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    0.835866] usb usb2: SerialNumber: ff580000.usb
[    0.836235] hub 2-0:1.0: USB hub found
[    0.836260] hub 2-0:1.0: 1 port detected
[    0.836547] usb20_host: version 3.10a 21-DEC-2012
[    0.839006] f0d00040
[    0.839019] Core Release: 3.10a
[    0.839029] Setting default values for core params
[    0.839128] Using Buffer DMA mode
[    0.839141] Periodic Transfer Interrupt Enhancement - disabled
[    0.839152] Multiprocessor Interrupt Enhancement - disabled
[    0.839163] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.839173] ^^^^^^^^^^^^^^^^^^Host Mode
[    0.839196] usb20_host ff540000.usb: DWC OTG Controller
[    0.839220] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    0.839249] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    0.839341] Init: Power Port (0)
[    0.839394] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.839410] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.839424] usb usb3: Product: DWC OTG Controller
[    0.839437] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    0.839450] usb usb3: SerialNumber: ff540000.usb
[    0.839803] hub 3-0:1.0: USB hub found
[    0.839826] hub 3-0:1.0: 1 port detected
[    0.840336] .. rk pwm remotectl v1.0 init
[    0.840418] remotectl probe j=0x0
[    0.840566] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[    0.840740] pwm enable val=0x646205
[    0.840996] usbcore: registered new interface driver xpad
[    0.841048] usbcore: registered new interface driver usb_acecad
[    0.841091] usbcore: registered new interface driver aiptek
[    0.841134] usbcore: registered new interface driver gtco
[    0.841177] usbcore: registered new interface driver hanwang
[    0.841219] usbcore: registered new interface driver kbtab
[    0.841267] usbcore: registered new interface driver wacom
[    0.841278] ==gsl_ts_init==
[    0.841361] GSLX680 Enter gsl_ts_probe
[    0.932287] dwc_otg_hcd_suspend, usb device mode
[    1.158558] gsl_ts_probe--1269, i2c_master_recv fail
[    1.158582] gslX680: probe of 1-0041 failed with error -11
[    1.158646] ret=0
[    1.163598] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    1.163659] i2c /dev entries driver
[    1.164327] IR NEC protocol handler initialized
[    1.164340] IR RC5(x) protocol handler initialized
[    1.164351] IR RC6 protocol handler initialized
[    1.164361] IR JVC protocol handler initialized
[    1.164371] IR Sony protocol handler initialized
[    1.164381] IR RC5 (streamzap) protocol handler initialized
[    1.164391] IR SANYO protocol handler initialized
[    1.164401] IR MCE Keyboard/mouse protocol handler initialized
[    1.164540] usbcore: registered new interface driver uvcvideo
[    1.164552] USB Video Class driver (1.1.1)
[    1.164565] CamSys driver version: v0.23.0,  CamSys head file version: v0.9.0
[    1.165926] D1:camsys_platform_probe(1067): 1-gpios-cifpowerï¼?gpio=-2
[    1.166004] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[    1.166145] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xf0ba8000  size: 0x4000)
[    1.166775] D1:camsys_platform_probe(1183): ff910000.isp memory:
[    1.166793] D1:camsys_platform_probe(1193):     Register memory (phy: 0xff910000 vir: 0xf0be0000 size: 0x10000)
[    1.166810] D1:camsys_platform_probe(1188):     I2c memory (phy: 0x2d9b2000 vir: 0xed9b2000 size: 0x1000)
[    1.166826] D1:camsys_platform_probe(1208): Probe ff910000.isp device success
[    1.168113] device-mapper: uevent: version 1.0.3
[    1.168334] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.168663] Bluetooth: HCI UART driver ver 2.2
[    1.168678] Bluetooth: HCI H4 protocol initialized
[    1.168690] Bluetooth: HCILL protocol initialized
[    1.171761] cpufreq version 1.0, suspend freq 1200 MHz
[    1.171954] cpuidle: using governor ladder
[    1.171967] cpuidle: using governor menu
[    1.172004] Synopsys Designware Multimedia Card Interface Driver
[    1.172233] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    1.172500] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[    1.172652] 3379..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[    1.172666] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    1.172781] 1390..dw_mci_set_ios:  no card. [mmc0]
[    1.188101] 1390..dw_mci_set_ios:  no card. [mmc0]
[    1.207794] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    1.207818] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    1.207838] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    1.208109] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    1.208932] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    1.209135] 3379..dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc1]
[    1.209182] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    1.209246] mmc1: no vmmc regulator found
[    1.209343] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[    1.209422] 1390..dw_mci_set_ios:  no card. [mmc1]
[    1.227445] 1390..dw_mci_set_ios:  no card. [mmc1]
[    1.239902] mmc0: BKOPS_EN bit is not set
[    1.241792] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[    1.241814] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    1.241868] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
[    1.241970] mmc0: new high speed MMC card at address 0001
[    1.242211] mmcblk0: mmc0:0001 AWMB3R 14.5 GiB
[    1.242487]  parameter: 0x000000000 -- 0x000400000 (4 MB)
[    1.242499]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    1.242508]       misc: 0x000800000 -- 0x000c00000 (4 MB)
[    1.242517]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    1.242526]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[    1.242535]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
[    1.242543]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[    1.242552]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
[    1.242561]      cache: 0x00a000000 -- 0x012000000 (128 MB)
[    1.242569]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
[    1.242578]     system: 0x012400000 -- 0x042400000 (768 MB)
[    1.242586]   metadata: 0x042400000 -- 0x042800000 (4 MB)
[    1.242594]   userdata: 0x042800000 -- 0x082800000 (1024 MB)
[    1.242603] radical_update: 0x082800000 -- 0x086800000 (64 MB)
[    1.242612]       user: 0x086800000 -- 0x3a3a00000 (12754 MB)
[    1.242637]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p151390..dw_mci_set_ios:  no card. [mmc1]
[    1.247157] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    1.247170] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[    1.247430] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    1.247623] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    1.247738] 3379..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    1.247748] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    1.247997] 1390..dw_mci_set_ios:  no card. [mmc2]
[    1.266808] 1390..dw_mci_set_ios:  no card. [mmc2]
[    1.286505] 1390..dw_mci_set_ios:  no card. [mmc2]
[    1.286516] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    1.286523] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    1.286753] hidraw: raw HID events driver (C) Jiri Kosina
[    1.288084] usbcore: registered new interface driver usbhid
[    1.288094] usbhid: USB HID core driver
[    1.288362] zram: Created 1 device(s) ...
[    1.288623] ashmem: initialized
[    1.288737] logger: created 256K log 'log_main'
[    1.288828] logger: created 256K log 'log_events'
[    1.288918] logger: created 256K log 'log_radio'
[    1.289013] logger: created 256K log 'log_system'
[    1.290026] input: rk29-keypad as /devices/ff100000.adc/key.37/input/input1
[    1.290798] es8323 probe i2c recv ok
[    1.290871] i2c-core: driver [ES8323] using legacy suspend method
[    1.290880] i2c-core: driver [ES8323] using legacy resume method
[    1.291656] rockchip-hdmi-spdif rockchip-hdmi-spdif.29: ASoC: CPU DAI (null) not registered
[    1.291684] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    1.291702] platform rockchip-hdmi-spdif.29: Driver rockchip-hdmi-spdif requests probe deferral
[    1.291934] es8323_probe
[    1.926449] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
[    1.926461] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
[    1.926473] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
[    1.926482] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
[    1.926491] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
[    1.926499] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
[    1.926515] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
[    1.926530] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
[    1.926540] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
[    1.926548] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
[    1.926558] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
[    1.926565] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
[    1.926575] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
[    1.926583] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
[    1.926592] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
[    1.926599] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
[    1.926608] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
[    1.926616] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
[    1.926625] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
[    1.926633] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
[    1.926642] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
[    1.926649] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
[    1.926658] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
[    1.926666] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
[    1.926675] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
[    1.926683] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
[    1.926692] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
[    1.926699] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
[    1.926708] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
[    1.926715] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
[    1.926724] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
[    1.926732] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
[    1.926751] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
[    1.926759] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
[    1.926767] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
[    1.926774] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
[    1.926783] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
[    1.926791] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
[    1.926800] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
[    1.926807] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
[    1.926816] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
[    1.926824] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
[    1.926832] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
[    1.926840] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
[    1.926957] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
[    1.926967] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
[    1.926977] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
[    1.926987] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
[    1.927005] ES8323 2-0010: ASoC: mux Differential Mux has no paths
[    1.930260] rockchip-es8323 rockchip-es8323.31:  ES8323 HiFi <-> rockchip-i2s.0 mapping ok
[    1.930584] input: RK_ES8323 Headphone Jack as /devices/rockchip-es8323.31/sound/card0/input2
[    1.931230] rockchip-hdmi-i2s rockchip-hdmi-i2s.28:  rk-hdmi-i2s-hifi <-> rockchip-i2s.0 mapping ok
[    1.931520] u32 classifier
[    1.931526]     Actions configured
[    1.931536] Netfilter messages via NETLINK v0.30.
[    1.931580] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.931819] ctnetlink v0.93: registering with nfnetlink.
[    1.931871] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    1.931878] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    1.932073] xt_time: kernel timezone is -0000
[    1.932227] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.932328] arp_tables: (C) 2002 David S. Miller
[    1.932360] TCP: cubic registered
[    1.932367] Initializing XFRM netlink socket
[    1.932531] NET: Registered protocol family 10
[    1.932931] mip6: Mobile IPv6
[    1.932952] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.933043] sit: IPv6 over IPv4 tunneling driver
[    1.933288] NET: Registered protocol family 17
[    1.933306] NET: Registered protocol family 15
[    1.933347] Bridge firewalling registered
[    1.933356] Ebtables v2.0 registered
[    1.933472] Bluetooth: RFCOMM TTY layer initialized
[    1.933494] Bluetooth: RFCOMM socket layer initialized
[    1.933500] Bluetooth: RFCOMM ver 1.11
[    1.933506] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.933511] Bluetooth: BNEP filters: protocol multicast
[    1.933521] Bluetooth: BNEP socket layer initialized
[    1.933527] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.933536] Bluetooth: HIDP socket layer initialized
[    1.933556] l2tp_core: L2TP core driver, V2.0
[    1.933567] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.933572] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.933705] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.933714] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[    1.933722] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.933729] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    1.933737] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.933754] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[    1.933771] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    1.933779] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.933798] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[    1.933831] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    1.933866] [BT_RFKILL]: Enter rfkill_rk_init
[    1.933968] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[    1.933982] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
[    1.933994] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[    1.934006] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[    1.934018] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[    1.934056] [BT_RFKILL]: Request irq for bt wakeup host
[    1.934129] [BT_RFKILL]: ** disable irq
[    1.934192] [BT_RFKILL]: ap6335 device registered.
[    1.934995] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
[    1.935697] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    1.935713] rk3288_init_suspend
[    1.935720] rk3288_suspend_init enter
[    1.935833] rk3288_suspend_init: pm_ctrbits =200007
[    1.935858] gpio_get_dts_info suspend:4
[    1.935864] gpio_get_dts_info resume:4
[    1.935869] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    1.935893] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    1.936036] clks_gating_suspend_init:clkgt info ok
[    1.936113] Registering SWP/SWPB emulation handler
[    1.936389] ddrfreq: verion 1.2 20140526
[    1.936399] ddrfreq: normal 396MHz video_1080p 240MHz video_4k 396MHz dualview 396MHz idle 0MHz suspend 200MHz reboot 396MHz
[    1.936406] ddrfreq: auto-freq=0
[    1.936411] ddrfreq: auto-freq-table[0] 240MHz
[    1.936417] ddrfreq: auto-freq-table[1] 324MHz
[    1.936422] ddrfreq: auto-freq-table[2] 396MHz
[    1.936427] ddrfreq: auto-freq-table[3] 528MHz
[    1.943643] regulator-dummy: disabling
[    1.943972] rockchip-hdmi-spdif rockchip-hdmi-spdif.29: ASoC: CPU DAI (null) not registered
[    1.943995] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    1.944008] platform rockchip-hdmi-spdif.29: Driver rockchip-hdmi-spdif requests probe deferral
[    1.944099] pcd_pullup, is_on 0
[    1.944136] file system registered
[    1.944662] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    1.944671] android_usb gadget: Number of LUNs=2
[    1.944678]  lun0: LUN: removable file: (no medium)
[    1.944684]  lun1: LUN: removable file: (no medium)
[    1.944797] android_usb gadget: android_usb ready
[    1.945331] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:06:13 UTC (1293883573)
[    1.949853] rk_spdif:rk_spdif_init
[    1.950021] rk_spdif:Entered spdif_probe
[    1.950195] rk_spdif:spdif:spdif probe ok!
[    1.950682] usbcore: registered new interface driver snd-usb-audio
[    1.950707] ALSA device list:
[    1.950713]   #0: RK_ES8323
[    1.950718]   #1: RK-HDMI-I2S
[    1.950944] rockchip-hdmi-spdif rockchip-hdmi-spdif.29:  rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
[    1.951049] Freeing unused kernel memory: 592K (c0af1000 - c0b85000)
[    1.955526] SELinux:  Permission attach_queue in class tun_socket not defined in policy.
[    1.955539] SELinux: the above unknown classes and permissions will be denied
[    2.312847] type=1403 audit(1293883573.870:2): policy loaded auid=4294967295 ses=4294967295
[    2.312951] SELinux: Loaded policy from /sepolicy
[    2.314406] type=1404 audit(1293883573.870:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    2.811688] dwc_otg_hcd_enable, enable host controller
[    2.935167] Using Buffer DMA mode
[    2.935179] Periodic Transfer Interrupt Enhancement - disabled
[    2.935185] Multiprocessor Interrupt Enhancement - disabled
[    2.935191] OTG VER PARAM: 0, OTG VER FLAG: 0
[    2.935197] ^^^^^^^^^^^^^^^^^^Host Mode
[    2.979045] Init: Power Port (0)
[    2.979078] ff540000.usb resume, HPRT0:0x21401
[    3.116776] Indeed it is in host mode hprt0 = 00021501
[    3.293865] usb 3-1: new high-speed USB device number 2 using usb20_host
[    3.293936] Indeed it is in host mode hprt0 = 00001101
[    3.447552] init: /dev/hw_random not found
[    3.448667] type=1400 audit(1293883575.020:4): avc:  denied  { mount } for  pid=1 comm="init" name="/" dev="functionfs" ino=8489 scontext=u:r:kernel:s0 tcontext=u:object_r:unlabeled:s0 tclass=filesystem permissive=1
[    3.448753] android_usb: already disabled
[    3.448875] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    3.448886] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    3.448976] drmboot: module license 'unspecified' taints kernel.
[    3.448983] Disabling lock debugging due to kernel taint
[    3.449762] %s: ok, 20130810
[    3.490874] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
[    3.490886] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.490894] usb 3-1: Product: USB 2.0 Hub [MTT]
[    3.491206] hub 3-1:1.0: USB hub found
[    3.491266] hub 3-1:1.0: 4 ports detected
[    3.608729] ff540000.usb suspend, HPRT0:0x1485
[    8.189173] init: /sbin/e2fsck terminated by exit(8)
[    8.189198] init: Operational error while checking volume '/dev/block/platform/emmc/by-name/cache'
[    8.189284] init: Failed to mount /dev/block/platform/emmc/by-name/cache, format it to ext4 now
[    8.191184] init: /dev/hw_random not found
[    8.191236] init: Unable to open persistent property directory /data/property errno: 2
[    8.192084] init: service 'recovery' requires console
[    8.192099] init: service 'console' requires console
[    8.192160] android_usb: already disabled
[    8.192294] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
[    8.192340] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
[    8.192385] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
[    8.192399] init: property 'ro.serialno' doesn't exist while expanding '$ro.serialno'
[    8.192411] init: cannot expand '$ro.serialno' while writing to '/sys/class/android_usb/android0/iSerial'
[    8.193700] read descriptors
[    8.193715] read strings
[    8.193743] pcd_pullup, is_on 1
[    8.735361] ***************vbus detect*****************
[    8.914615] Using Buffer DMA mode
[    8.914631] Periodic Transfer Interrupt Enhancement - disabled
[    8.914640] Multiprocessor Interrupt Enhancement - disabled
[    8.914648] OTG VER PARAM: 0, OTG VER FLAG: 0
[    8.914656] ^^^^^^^^^^^^^^^^^Device Mode
[    8.914699] *******************soft connect!!!*******************
[    9.024551] USB RESET
[    9.065606] android_work: sent uevent USB_STATE=CONNECTED
[    9.069620] USB RESET
[    9.159638] android_usb gadget: high-speed config #1: android
[    9.159713] android_work: sent uevent USB_STATE=CONFIGURED
作者: sulq23    时间: 2015-4-29 16:31
不能进入recovery
作者: zhansb    时间: 2015-4-29 17:07
使用官方的pad版能否正常开机?
git仓库更新到哪个地方?
作者: sulq23    时间: 2015-4-30 08:54
我使用的是45fb49a 2015-01-27 的pad版的版本
a、直接编译kernel,进行Loader、Parameter、Misc、Resource、Kernel、Boot、Recovery、System。全部烧写,烧写后不能正常启动,修改parameter后,能够正常启动(即1楼中问题1)。

作者: zhansb    时间: 2015-4-30 09:20
使用官方发布的固件正常吗?
如:RK3288_PAD_IPS5K0350FPC_Android4.4_201504222155.7z
作者: zhansb    时间: 2015-4-30 09:20
使用官方发布的固件正常吗?
如:RK3288_PAD_IPS5K0350FPC_Android4.4_201504222155.7z
作者: sulq23    时间: 2015-4-30 13:10
使用RK3288_PAD_IPS5K0350FPC_Android4.4_201504222155.7z固件,可以正常启动

下载源码后编译,什么都没改,更改parameter为
CMDLINE:console=ttyS2 earlyprintk androidboot.hardware=rk30board androidboot.console=ttyS2 board.ap_has_alsa=0 init=/init initrd=0x62000000,0x00800000 mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user)
也可以正常启动
关键是我修改arch/arm/boot/dts/firefly-rk3288.dts 文件后,随便改一处地方 i2c5 。烧写就不能正常启动了。
作者: sulq23    时间: 2015-4-30 14:19
版主你好,我将RK3288_PAD_IPS5K0350FPC_Android4.4_201504222155.7z固件解包后,将里面的recovery.img提取出来。
烧写下载源码编译后的misc.img、resource.img 、kernel.img 、boot.img 、recovery.img(201504222155.7z固件提取) 、system.img
可以正常启动了,也能进recovery

但是使用源码编译的recovery.img不行,现在确认应该问题在recovery.img中,不知道固件中的recovery.img和源码编译的recovery.img有什么区别。
作者: zhansb    时间: 2015-4-30 14:27
编译和wiki上一样,make后./mkimage.sh

试试make clean后重新编译
作者: sulq23    时间: 2015-4-30 14:34
make clean了,编译时出现下面错误,是否有关系
----- Making recovery image ------
Copying baseline ramdisk...
Modifying ramdisk contents...
cp: 无法获取"out/target/product/rk3288/root/init.recovery.*.rc" 的文件状态(stat): 没有那个文件或目录
make: [out/target/product/rk3288/recovery.img] 错误 1 (忽略)
device/rockchip/rksdk/recovery_contents.sh rk3288 out/target/product/rk3288 rk3288 false
rk3288 out/target/product/rk3288 rk3288 false
----- Made recovery image: out/target/product/rk3288/recovery.img --------
Construct recovery from boot
mkdir -p out/target/product/rk3288/obj/PACKAGING/recovery_patch_intermediates/
PATH=out/host/linux-x86/bin:$PATH out/host/linux-x86/bin/imgdiff out/target/product/rk3288/boot.img out/target/product/rk3288/recovery.img out/target/product/rk3288/obj/PACKAGING/recovery_patch_intermediates/recovery_from_boot.p

作者: sulq23    时间: 2015-5-4 15:20
版主有什么发现吗?  我们现在就差这个了,这个问题解决了 我们就可以量产了!!!
作者: zhansb    时间: 2015-5-4 16:18
cp: 无法获取"out/target/product/rk3288/root/init.recovery.*.rc" 的文件状态(stat): 没有那个文件或目录

这个正常编译的也有,可以把:
git log -5
git status
完整的编译指令

这些信息发出来
作者: sulq23    时间: 2015-5-4 16:45
版主 你好,我将RK3288_PAD_IPS5K0350FPC_Android4.4_201504222155.7z提取出的recovery.img解包出三个文件:
recovery.img-kernel  recovery.img-ramdisk.gz  recovery.img-second.gz,其中recovery.img-second.gz是干什么的?
pad 版源码编译完recovery.img,解包没有这个文件?怎么能编译出recovery.img-second.gz
作者: sulq23    时间: 2015-5-4 16:53
git log -5
commit 45fb49ab0f4137287ff22b85ebdea5e37b88da3a
Author: Firefly-RK3288 <service@t-firefly.com>
Date:   Tue Jan 27 16:16:02 2015 +0800

    Kernel->Camera:set the AF_VDD default voltage as 2.8V

commit 6e3a1de76223e816e5b16848b0db89c10fa10b46
Author: Firefly-RK3288 <service@t-firefly.com>
Date:   Thu Jan 22 16:24:01 2015 +0800

    kernel->lcd: increase the capacity of mipi cmds

commit 62c41e21af39968efc91bcad796fddc25839c55c
Author: Firefly-RK3288 <service@t-firefly.com>
Date:   Fri Jan 16 14:52:01 2015 +0800

    kernel->backlight: scale backlight, skip dark parameter

commit c2b05e62c52a7e126d3ea86060e5c0963928a2c1
Author: Firefly-RK3288 <service@t-firefly.com>
Date:   Wed Jan 21 20:52:56 2015 +0800

    Kernel->Ethernet:raise the Ethernet speed

commit 9ab4f22a4866a17e224e84b9ada9c3d1d36d629a
Author: Firefly-RK3288 <service@t-firefly.com>
Date:   Tue Jan 20 18:33:00 2015 +0800

    Android->Mkimage:rm fw_config
smdt@ubuntu:~/work/rk3288-pad-original$ git status
# On branch master
# Changes not staged for commit:
#   (use "git add <file>..." to update what will be committed)
#   (use "git checkout -- <file>..." to discard changes in working directory)
#
#        modified:   device/rockchip/rk3288/rk3288.mk
#        modified:   device/rockchip/rk3288/system.prop
#        modified:   frameworks/base/core/java/android/net/EthernetDataTracker.java
#        modified:   frameworks/base/core/res/res/values/config.xml
#        modified:   frameworks/base/core/res/res/values/dimens.xml
#        modified:   frameworks/base/packages/Keyguard/src/com/android/keyguard/KeyguardViewManager.java
#        modified:   frameworks/base/packages/Keyguard/src/com/android/keyguard/KeyguardViewMediator.java
#        modified:   frameworks/base/packages/SettingsProvider/res/values/defaults.xml
#        modified:   frameworks/base/packages/SettingsProvider/src/com/android/providers/settings/DatabaseHelper.java
#        modified:   frameworks/base/packages/SystemUI/src/com/android/systemui/statusbar/phone/PhoneStatusBar.java
#        modified:   frameworks/base/policy/src/com/android/internal/policy/impl/PhoneWindowManager.java
#        modified:   frameworks/base/services/input/InputReader.cpp
#        modified:   frameworks/base/services/java/com/android/server/power/PowerManagerService.java
#        modified:   frameworks/base/services/java/com/android/server/wm/WindowManagerService.java
#        modified:   frameworks/native/services/surfaceflinger/SurfaceFlinger.cpp
#        modified:   kernel/arch/arm/boot/dts/firefly-rk3288.dts
#        modified:   packages/apps/Settings/res/values-zh-rCN/arrays.xml
#        modified:   packages/apps/Settings/res/values/arrays.xml
#        modified:   packages/apps/Settings/src/com/android/settings/DisplaySettings.java
#
# Untracked files:
#   (use "git add <file>..." to include in what will be committed)
#
#        device/rockchip/rk3288/bootanimation.zip
no changes added to commit (use "git add" and/or "git commit -a")

编译是指令是按照文档
cd ~/proj/firefly-rk3288/kernel
make firefly-rk3288_defconfig
make -j8 firefly-rk3288.img

cd ~/proj/firefly-rk3288
make -j8
./mkimage.sh
作者: zhansb    时间: 2015-5-4 19:06
改了很多文件啊,可以做一下排除,看看是哪个修改导致的
有可能是devices里面的修改
作者: sulq23    时间: 2015-5-5 09:38
版主 你好,我将RK3288_PAD_IPS5K0350FPC_Android4.4_201504222155.7z提取出的recovery.img解包出三个文件:
recovery.img-kernel  recovery.img-ramdisk.gz  recovery.img-second.gz,其中recovery.img-second.gz是干什么的?
pad 版源码编译完recovery.img,解包没有这个文件?怎么能编译出recovery.img-second.gz
作者: zhansb    时间: 2015-5-5 10:16
你用什么指令解包?
作者: sulq23    时间: 2015-5-5 10:51
使用split_bootimg.pl工具
./split_bootimg.pl recovery.img
解得包
作者: zhansb    时间: 2015-5-5 15:03
可以看看recovery生成的脚本:mkimage.sh
作者: sulq23    时间: 2015-5-5 15:41
谢谢版主,通过看mkimage.sh 解决了这个问题。
作者: tangyu1121    时间: 2015-8-13 09:29
sulq23 发表于 2015-5-5 15:41
谢谢版主,通过看mkimage.sh 解决了这个问题。

请问你是怎么解决的?




欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/) Powered by Discuz! X3.1