Firefly开源社区

标题: 15.6寸edp屏只亮背光，无图像 [打印本页]

作者: xi0325 时间: 2017-3-14 13:37
标题: 15.6寸edp屏只亮背光，无图像
使用15.6寸 NT156FHM无法点亮，只亮背光，屏幕呈现灰色。附件是15.6寸显示屏规格书和打印信息。15.6寸edp屏规格书
{

disp_timings: display-timings {
                     native-mode = <&timing0>;
                     timing0: timing0 {
screen-type = <SCREEN_EDP>;
out-face = <OUT_P666>;
clock-frequency = <153600000>;
hactive = <1920>;
vactive = <1080>;
hback-porch = <100>;
hfront-porch = <100>;
vback-porch = <30>;
vfront-porch = <30>;
hsync-len = <87>;
vsync-len = <20>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <0>;
pixelclk-active = <0>;
swap-rb = <0>;
swap-rg = <0>;
swap-gb = <0>;
                     };
            };
};
麻烦各位高手帮忙看看是什么问题。。。。

作者: loading 时间: 2017-3-15 18:32
把内核log 贴出来看看

作者: xi0325 时间: 2017-3-20 12:12

loading 发表于 2017-3-15 18:32
把内核log 贴出来看看

U-Boot 2014.10-RK3288-10-gc28aaca (Feb 18 2017 - 04:10:44)

CPU: rk3288
cpu version = 0
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 20
SdmmcInit = 2 0
storage init OK!
Using default environment

GetParam
Load FDT from resource image.
power key: bank-0 pin-5
pmic:act8846
can't find dts node for pwm1
DCDC vdd_logic has been used, pwm regulator not init it.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2017-02-18#2.30
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
pll_src = 0, dclk_hz = 153600000, dclk_div = 2
edp pll locked
link training success.
unable to config video
no fuel gauge found
Hit any key to stop autoboot:  0
load fdt from resouce.
Secure Boot state: 0
kernel @ 0x02000000 (0x00692e20)
ramdisk  @ 0x05bf0000 (0x00138ef4)
bootrk: do_bootm_linux...
Loading Device Tree to 05600000, end 0561b486 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0x500
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0 (xxl@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #14 SMP PREEMPT Fri Mar 10 02:49:17 EST 2017
[ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[ 0.000000] rockchip_uboot_logo_setup: mem: 0x02000000@0x7dc00000, offset:0x01000000
[ 0.000000] rockchip_uboot_mem_reserve: reserve 0x02000000@0x7dc00000 for uboot logo
[ 0.000000] rockchip_ion_reserve
[ 0.000000] ion heap(drm): base(0) size(0) align(0)
[ 0.000000] ion heap(cma): base(0) size(28000000) align(0)
[ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[ 0.000000] cma: CMA: reserved 640 MiB at 55c00000
[ 0.000000] ion_reserve: cma reserved base 55c00000 size 671088640
[ 0.000000] cma: CMA: reserved 16 MiB at 1f000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] Boot mode: REBOOT (6) flag: NORMAL (0xc3524200)
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1ee5000 s13376 r8192 d15296 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523264
[ 0.000000] Kernel command line: vmalloc=496M console=ttyFIQ0 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00300000@0x00092000(system),0x00008000@0x00392000(metadata),0x00002000@0x0039A000(baseparamer),0x00200000@0x0039C000(userdata),0x00020000@0x0059C000(radical_update),-@0x005BC000(user) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000:0x01000000 loader.timestamp=2017-02-18_04:10:44
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] allocated 4194304 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 2048MB = 2048MB total
[ 0.000000] Memory: 1354968k/1354968k available, 742184k reserved, 884736K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000]    vector  : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000]    fixmap  : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000]    vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
[ 0.000000]    lowmem  : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000]    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000]    modules : 0xbf000000 - 0xbfe00000 (  14 MB)
[ 0.000000]    .text : 0xc0008000 - 0xc0b81504 (11750 kB)
[ 0.000000]    .init : 0xc0b82000 - 0xc0bdb440 ( 358 kB)
[ 0.000000]    .data : 0xc0bdc000 - 0xc0d6b8c0 (1599 kB)
[ 0.000000]       .bss : 0xc0d6b8c0 - 0xc0e8c97c (1157 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] rk_clk_tree_init start!
[ 0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
[ 0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
[ 0.000000] rkclk_init_clks: cnt_parent = 7
[ 0.000000] rkclk_init_clks: cnt_rate = 28
[ 0.000000] rk3288 set GPLL BW 20 for HDMI!
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[ 0.000000] process version: 3
[ 0.000000] channel:0, lkg:16
[ 0.000000] target-temp:80
[ 0.000000] channel:2, lkg:0
[ 0.000000] channel:0, lkg:16
[ 0.000000] channel:1, lkg:13
[ 0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[ 0.345337] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[ 0.345353] pid_max: default: 32768 minimum: 301
[ 0.345466] Security Framework initialized
[ 0.345482] SELinux:  Initializing.
[ 0.345555] Mount-cache hash table entries: 512
[ 0.346197] Initializing cgroup subsys debug
[ 0.346213] Initializing cgroup subsys memory
[ 0.346239] Initializing cgroup subsys freezer
[ 0.346268] CPU: Testing write buffer coherency: ok
[ 0.346578] /cpus/cpu@0 missing clock-frequency property
[ 0.346591] /cpus/cpu@1 missing clock-frequency property
[ 0.346601] /cpus/cpu@2 missing clock-frequency property
[ 0.346610] /cpus/cpu@3 missing clock-frequency property
[ 0.346661] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[ 0.346712] Setting up static identity map for 0xc0852eb8 - 0xc0852f10
[ 0.348966] last_log: 0x1e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x1830 (version 3.1)
[ 0.423516] CPU1: Booted secondary processor
[ 0.423548] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[ 0.443186] CPU2: Booted secondary processor
[ 0.443210] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[ 0.462896] CPU3: Booted secondary processor
[ 0.462919] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[ 0.463022] Brought up 4 CPUs
[ 0.463051] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[ 0.463060] CPU: All CPU(s) started in SVC mode.
[ 0.463801] devtmpfs: initialized
[ 0.467992] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[ 0.469065] pinctrl core: initialized pinctrl subsystem
[ 0.469315] regulator-dummy: no parameters
[ 0.493486] NET: Registered protocol family 16
[ 0.495291] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.495618] ion_snapshot: 0x1ea90000 map to 0xe0907000 and copy to 0xc0e67e8c (version 0.1)
[ 0.495872] Registered FIQ tty driver
[ 0.497171] console [ttyFIQ0] enabled
[ 0.497416] Registered fiq debugger ttyFIQ0
[ 0.498029] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[ 0.498053] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[ 0.498073] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[ 0.498092] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[ 0.498186] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[ 0.498253] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[ 0.498317] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[ 0.498387] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[ 0.498455] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[ 0.498521] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[ 0.498585] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[ 0.498650] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[ 0.498723] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[ 0.498790] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[ 0.498806] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[ 0.498821] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[ 0.498835] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[ 0.499450] rockchip_interrupts_register:bank_num=7
[ 0.501430] of_get_gpio_init_config:gpio[0] = 6, value = 0
[ 0.501490] rockchip_pinctrl_probe:init ok
[ 0.508001] rk_iommu ff900800.iep_mmu: (iep) Enter
[ 0.508090] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.508107] rk_iommu ff900800.iep_mmu: (iep) Initialized
[ 0.508281] rk_iommu ff950800.vip_mmu: (vip) Enter
[ 0.508354] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.508370] rk_iommu ff950800.vip_mmu: (vip) Initialized
[ 0.508543] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[ 0.508614] rk_iommu ff930300.vopb_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.508631] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[ 0.508799] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[ 0.508874] rk_iommu ff940300.vopl_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.508890] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[ 0.509085] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[ 0.509162] rk_iommu ff9c0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.509178] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[ 0.509343] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[ 0.509414] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.509430] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[ 0.509605] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[ 0.509684] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[ 0.509700] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[ 0.511358] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.511374] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 0.511996] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
[ 0.512023] DDR DEBUG: version 1.00 20150126
[ 0.512055] DDR DEBUG: Channel a:
[ 0.512065] DDR DEBUG: DDR3 Device
[ 0.512080] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[ 0.512092] DDR DEBUG: Channel b:
[ 0.512101] DDR DEBUG: DDR3 Device
[ 0.512115] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[ 0.512127] DDR DEBUG: addr=0xd75000
[ 0.512138] DDR DEBUG: stride=9, size=256, halfcap=40000000
[ 0.512149] DDR DEBUG: socAddr[0]=0xd75000, socAddr[1]=0xd75100
[ 0.512160] DDR DEBUG: chAddr[0]=0xd75000, chAddr[1]=0xd75000
[ 0.512173] DDR DEBUG: dtar[0]=0x501ae000, dtar[1]=0x501ae000
[ 0.512229] DDR DEBUG: init success!!! freq=200MHz
[ 0.512239] DDR DEBUG: Channel a:
[ 0.512254] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
[ 0.512269] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
[ 0.512285] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
[ 0.512301] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
[ 0.512316] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 0.512328] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 0.512339] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.512348] DDR DEBUG: Channel b:
[ 0.512361] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
[ 0.512377] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
[ 0.512392] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
[ 0.512408] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,0 extra clock, DGPS=180,270
[ 0.512422] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[ 0.512433] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[ 0.512444] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[ 0.536606] bio: create slab <bio-0> at 0
[ 0.537146] Rockchip hdmi driver version 2.0
.
[ 0.538291] SCSI subsystem initialized
[ 0.538450] usbcore: registered new interface driver usbfs
[ 0.538497] usbcore: registered new interface driver hub
[ 0.538595] usbcore: registered new device driver usb
[ 0.541289] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[ 0.541815] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[ 0.542280] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[ 0.542733] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[ 0.542857] media: Linux media interface: v0.10
[ 0.542898] Linux video capture interface: v2.00
[ 0.543013] pps_core: LinuxPPS API ver. 1 registered
[ 0.543026] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.543056] PTP clock support registered
[ 0.543113] i2c-core: driver [bq24296] using legacy suspend method
[ 0.543126] i2c-core: driver [bq24296] using legacy resume method
[ 0.543785] ion_drm_heap_create: 0@0
[ 0.543921] Rockchip ion module is successfully loaded (v1.1)
[ 0.544083] Advanced Linux Sound Architecture Driver Initialized.
[ 0.544490] Bluetooth: Core ver 2.16
[ 0.544529] NET: Registered protocol family 31
[ 0.544541] Bluetooth: HCI device and connection manager initialized
[ 0.544560] Bluetooth: HCI socket layer initialized
[ 0.544576] Bluetooth: L2CAP socket layer initialized
[ 0.544606] Bluetooth: SCO socket layer initialized
[ 0.544852] cfg80211: Calling CRDA to update world regulatory domain
[ 0.545499] act8846_i2c_probe,line=880
[ 0.546512] act8846_parse_dt,line=744
[ 0.546954] act8846_i2c_probe: act8846_pmic_hold=1
[ 0.549023] act_dcdc1: 1200 mV
[ 0.552000] vccio: 3300 mV
[ 0.553876] vdd_logic: 700 <--> 1500 mV at 1125 mV
[ 0.556839] act_dcdc4: 2000 mV
[ 0.558096] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[ 0.560413] act_ldo2: 1000 mV
[ 0.562741] act_ldo3: 3300 mV
[ 0.565063] act_ldo4: 3300 mV
[ 0.567373] act_ldo5: 3300 mV
[ 0.569697] act_ldo6: 1000 mV
[ 0.572036] vcc_18: 1800 mV
[ 0.574365] act_ldo8: 1800 mV
[ 0.579216] vdd_arm: 712 <--> 1500 mV at 1100 mV
[ 0.583950] vdd_gpu: 712 <--> 1500 mV at 900 mV
[ 0.584680] rk808_i2c_probe,line=1355
[ 0.586016] The device is not rk808 -11
[ 0.586104] rk808: probe of 0-001b failed with error -11
[ 0.586174] i2c-core: driver [rk816] using legacy suspend method
[ 0.586187] i2c-core: driver [rk816] using legacy resume method
[ 0.586229] i2c-core: driver [rk818] using legacy suspend method
[ 0.586241] i2c-core: driver [rk818] using legacy resume method
[ 0.587957] Switching to clocksource arch_sys_counter
[ 0.611790] rga: Module initialized.
[ 0.612513] rga2 ff920000.rga: rga ion client create success!
[ 0.612711] rga: Driver loaded succesfully
[ 0.612946] rk-fb rockchip-fb: rk fb ion client create success!
[ 0.612962] rk-fb rockchip-fb: rockchip framebuffer driver probe
[ 0.613256] rk-screen rk_screen.9: rockchip screen probe success
[ 0.613410] rk32-lvds ff96c000.lvds: screen is not lvds/rgb!
[ 0.613433] rk32-lvds: probe of ff96c000.lvds failed with error -22
[ 0.613916] rk32-edp rk32-edp: failed to get reset
[ 0.613934] rk32-edp rk32-edp: failed to get reset
[ 0.614030] rk32-edp rk32-edp: rk32 edp driver probe success
[ 0.614780] graphics fb0: rockchip framebuffer registerd:fb0
[ 0.615104] graphics fb1: rockchip framebuffer registerd:fb1
[ 0.615271] graphics fb2: rockchip framebuffer registerd:fb2
[ 0.615439] graphics fb3: rockchip framebuffer registerd:fb3
[ 0.615670] rk3288-lcdc lcdc0: lcdc0: dclk:153600000>>fps:60
[ 0.615688] rk3288-lcdc lcdc0: wakeup from standby!
[ 0.639641] rk_battery_charger_detect_cb , battery_charger_detect 1
[ 0.648492] alloc_buffer:ion_phy_addr=0x55c00000
[ 0.661068] fb0:phy:55c00000>>vir:e0991000>>len:0x1800000
[ 0.667187] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
[ 0.667375] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[ 0.667392] rk_fb_trsm_ops_get:un supported transmitter:0!
[ 0.667640] graphics fb4: rockchip framebuffer registerd:fb4
[ 0.667970] graphics fb5: rockchip framebuffer registerd:fb5
[ 0.668140] graphics fb6: rockchip framebuffer registerd:fb6
[ 0.668309] graphics fb7: rockchip framebuffer registerd:fb7
[ 0.668554] unknow screen type: 0
[ 0.668620] rk3288-lcdc lcdc1: lcdc1: dclk:153600000>>fps:791
[ 0.668634] rk3288-lcdc lcdc1: wakeup from standby!
[ 0.668650] fb4:phy:55c00000>>vir:e0991000>>len:0x1800000
[ 0.668663] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
[ 0.669528] rockchip_set_mux:warning ignore bank num 15
[ 0.669668] rockchip_set_mux:warning ignore bank num 15
[ 0.669790] rockchip_set_mux:warning ignore bank num 15
[ 0.669908] rockchip_set_mux:warning ignore bank num 15
[ 0.670023] rockchip_set_mux:warning ignore bank num 15
[ 0.670148] rockchip_set_mux:warning ignore bank num 15
[ 0.670726] rockchip_set_mux:warning ignore bank num 15
[ 0.670906] rockchip_set_mux:warning ignore bank num 15
[ 0.671465] rockchip_set_mux:warning ignore bank num 15
[ 0.671612] rockchip_set_mux:warning ignore bank num 15
[ 0.672164] rockchip_set_mux:warning ignore bank num 15
[ 0.672328] rockchip_set_mux:warning ignore bank num 15
[ 0.672895] rockchip_set_mux:warning ignore bank num 15
[ 0.673049] rockchip_set_mux:warning ignore bank num 15
[ 0.674514] NET: Registered protocol family 2
[ 0.675205] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.675288] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.675364] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.675427] TCP: reno registered
[ 0.675443] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.675469] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.675670] NET: Registered protocol family 1
[ 0.676394] Unpacking initramfs...
[ 0.743488] Freeing initrd memory: 1248K (c5bf0000 - c5d28000)
[ 0.744206] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[ 0.744746] vcodec_service: probe device ff9a0000.vpu_service
[ 0.744943] vcodec_service: No reset resource define
[ 0.745147] vcodec_service: ff9a0000.vpu_service: power on
[ 0.745235] vcodec_service: probe device ff9a0000.vpu_service
[ 0.745254] vcodec_service: checking hw id 4831
[ 0.745729] vcodec_service: ff9a0000.vpu_service: power off...
[ 0.745776] vcodec_service: done
[ 0.745787] vcodec_service: init success
[ 0.745850] vcodec_service: probe device ff9c0000.hevc_service
[ 0.746190] vcodec_service: ff9c0000.hevc_service: power on
[ 0.746251] vcodec_service: probe device ff9c0000.hevc_service
[ 0.746268] vcodec_service: checking hw id 6867
[ 0.746525] vcodec_service: ff9c0000.hevc_service: power off...
[ 0.746567] vcodec_service: done
[ 0.746578] vcodec_service: init success
[ 0.746714] rknandbase v1.0 2014-03-31
[ 0.746850] rknand: probe of ff400000.nandc failed with error -1
[ 0.746968] rknand_driver:ret = 0
[ 0.748169] audit: initializing netlink socket (disabled)
[ 0.748218] type=2000 audit(0.400:1): initialized
[ 0.749054] bounce pool size: 64 pages
[ 0.753625] fuse init (API version 7.22)
[ 0.754019] msgmni has been set to 952
[ 0.755925] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 0.755944] io scheduler noop registered
[ 0.755956] io scheduler deadline registered
[ 0.756075] io scheduler cfq registered (default)
[ 0.757789] rockchip-hdmiv2 ff980000.hdmi: rockchip hdmiv2 probe sucess.
[ 0.758490] IEP Driver loaded succesfully
[ 0.758582] Module initialized.
[ 0.759537] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[ 0.759559] dma-pl330 ffb20000.pdma:       DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[ 0.760926] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[ 0.760946] dma-pl330 ff250000.pdma:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.761220] pwm-voltage-regulator pwm_regulator.24: unable to request PWM, trying legacy API
[ 0.761240] pwm-voltage-regulator pwm_regulator.24: unable to request legacy PWM
[ 0.761253] pwm_regulator_probe:error
[ 0.761274] pwm-voltage-regulator: probe of pwm_regulator.24 failed with error -16
[ 0.761473] rk_serial.c v1.8 2014-03-04
[ 0.761701] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[ 0.761902] serial ff180000.serial: membase e319c000
[ 0.762055] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 88) is a rk29_serial.1
[ 0.762221] serial ff190000.serial: membase e319e000
[ 0.762384] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 91) is a rk29_serial.4
[ 0.762550] serial ff1c0000.serial: membase e31be000
[ 0.765337] loop: module loaded
[ 0.765706] zram: Created 1 device(s) ...
[ 0.765781] i2c-core: driver [mpu6050B1] using legacy suspend method
[ 0.765794] i2c-core: driver [mpu6050B1] using legacy resume method
[ 0.765811] mpu_init: Probe name mpu6050B1
[ 0.765962] ak8963_mod_init: Probe name ak8963_mod
[ 0.766659] SCSI Media Changer driver v0.25
[ 0.766976] tun: Universal TUN/TAP device driver, 1.6
[ 0.766990] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.767115] vmac_init.
[ 0.767693] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[ 0.767711] stmmac_probe_config_dt: clock input/output? (input).
[ 0.767725] stmmac_probe_config_dt: TX delay(0x30).
[ 0.767737] stmmac_probe_config_dt: RX delay(0x20).
[ 0.767791] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[ 0.767802] stmmc_pltfr_init:
[ 0.767812] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[ 0.767871] stmmc_pltfr_init: init for RGMII
[ 0.767884] tx delay=0x30
[ 0.767884] rx delay=0x20
[ 0.767900] tx delay=0x30
[ 0.767900] rx delay=0x20
[ 0.768354] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 0.768366]  Normal descriptors
[ 0.768375]  Ring mode enabled
[ 0.768386]  DMA HW capability register supported
[ 0.768399]  RX Checksum Offload Engine supported (type 2)
[ 0.768410]  TX Checksum insertion supported
[ 0.768420]  Wake-Up On Lan supported
[ 0.768459]  Enable RX Mitigation via HW Watchdog Timer
[ 0.768929] PPP generic driver version 2.4.2
[ 0.769085] PPP BSD Compression module registered
[ 0.769100] PPP Deflate Compression module registered
[ 0.769124] PPP MPPE Compression module registered
[ 0.769138] NET: Registered protocol family 24
[ 0.769175] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 0.769190] CSLIP: code copyright 1989 Regents of the University of California.
[ 0.769203] Rockchip WiFi SYS interface (V1.00) ...
[ 0.769240] esp_mem_init enter date Mar  6 2017 05:05:09
[ 0.769252] esp_mem_init VERSION [V2.5]
[ 0.769293] esp_mem_init complete
[ 0.769380] usbcore: registered new interface driver catc
[ 0.769434] usbcore: registered new interface driver kaweth
[ 0.769448] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.769493] usbcore: registered new interface driver pegasus
[ 0.769534] usbcore: registered new interface driver rtl8150
[ 0.769576] usbcore: registered new interface driver r8152
[ 0.769588] hso: drivers/net/usb/hso.c: Option Wireless
[ 0.769659] usbcore: registered new interface driver hso
[ 0.769707] usbcore: registered new interface driver asix
[ 0.769753] usbcore: registered new interface driver ax88179_178a
[ 0.769796] usbcore: registered new interface driver cdc_ether
[ 0.769838] usbcore: registered new interface driver cdc_eem
[ 0.769878] usbcore: registered new interface driver dm9601
[ 0.769932] usbcore: registered new interface driver dm9620
[ 0.769986] usbcore: registered new interface driver smsc75xx
[ 0.770037] usbcore: registered new interface driver smsc95xx
[ 0.770078] usbcore: registered new interface driver gl620a
[ 0.770118] usbcore: registered new interface driver net1080
[ 0.770156] usbcore: registered new interface driver plusb
[ 0.770195] usbcore: registered new interface driver rndis_host
[ 0.770233] usbcore: registered new interface driver cdc_subset
[ 0.770269] usbcore: registered new interface driver zaurus
[ 0.770309] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 0.770376] usbcore: registered new interface driver int51x1
[ 0.770417] usbcore: registered new interface driver kalmia
[ 0.770456] usbcore: registered new interface driver ipheth
[ 0.770498] usbcore: registered new interface driver sierra_net
[ 0.770537] usbcore: registered new interface driver cx82310_eth
[ 0.770584] usbcore: registered new interface driver cdc_ncm
[ 0.770628] usbcore: registered new interface driver qmi_wwan
[ 0.770669] usbcore: registered new interface driver cdc_mbim
[ 0.770682] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.773126] EHCI: ehci_rk_probe e3240000 e3240010
[ 0.773144] rockchip_ehci_host ff500000.usb: EHCI Host Controller
[ 0.773179] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[ 0.773510] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[ 0.784845] rockchip_ehci_host ff500000.usb: USB 2.0 started, EHCI 1.00
[ 0.784931] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.784949] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.784964] usb usb1: Product: EHCI Host Controller
[ 0.784978] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[ 0.784991] usb usb1: SerialNumber: ff500000.usb
[ 0.785432] hub 1-0:1.0: USB hub found
[ 0.785458] hub 1-0:1.0: 1 port detected
[ 0.785626] EHCI: ehci_rk_probe ok
[ 0.785729] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.785931] usbcore: registered new interface driver cdc_acm
[ 0.785944] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.785998] usbcore: registered new interface driver usblp
[ 0.786041] usbcore: registered new interface driver cdc_wdm
[ 0.786102] usbcore: registered new interface driver usb-storage
[ 0.786150] usbcore: registered new interface driver ums-alauda
[ 0.786190] usbcore: registered new interface driver ums-cypress
[ 0.786228] usbcore: registered new interface driver ums-datafab
[ 0.786267] usbcore: registered new interface driver ums_eneub6250
[ 0.786305] usbcore: registered new interface driver ums-freecom
[ 0.786345] usbcore: registered new interface driver ums-isd200
[ 0.786384] usbcore: registered new interface driver ums-jumpshot
[ 0.786426] usbcore: registered new interface driver ums-karma
[ 0.786465] usbcore: registered new interface driver ums-onetouch
[ 0.786508] usbcore: registered new interface driver ums-sddr09
[ 0.786552] usbcore: registered new interface driver ums-sddr55
[ 0.786592] usbcore: registered new interface driver ums-usbat
[ 0.786686] usbcore: registered new interface driver usbserial
[ 0.786727] usbcore: registered new interface driver usbserial_generic
[ 0.786760] usbserial: USB Serial support registered for generic
[ 0.786801] usbcore: registered new interface driver option
[ 0.786832] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.786906] usbcore: registered new interface driver trancevibrator
[ 0.786919] usb20_otg: version 3.10a 21-DEC-2012
[ 0.787364] e3280040
[ 0.787377] Core Release: 3.10a
[ 0.787388] Setting default values for core params
[ 0.787514] Using Buffer DMA mode
[ 0.787526] Periodic Transfer Interrupt Enhancement - disabled
[ 0.787537] Multiprocessor Interrupt Enhancement - disabled
[ 0.787549] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.787560] ^^^^^^^^^^^^^^^^^Device Mode
[ 0.787574] Dedicated Tx FIFOs mode
[ 0.787593] pcd_init otg_dev = ddefd180
[ 0.787745] usb20_otg ff580000.usb: DWC OTG Controller
[ 0.787777] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[ 0.787807] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[ 0.787866] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.787883] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.787898] usb usb2: Product: DWC OTG Controller
[ 0.787911] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 0.787924] usb usb2: SerialNumber: ff580000.usb
[ 0.788332] hub 2-0:1.0: USB hub found
[ 0.788356] hub 2-0:1.0: 1 port detected
[ 0.788667] usb20_host: version 3.10a 21-DEC-2012
[ 0.791153] e3300040
[ 0.791166] Core Release: 3.10a
[ 0.791177] Setting default values for core params
[ 0.791283] Using Buffer DMA mode
[ 0.791296] Periodic Transfer Interrupt Enhancement - disabled
[ 0.791306] Multiprocessor Interrupt Enhancement - disabled
[ 0.791319] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 0.791329] ^^^^^^^^^^^^^^^^^^Host Mode
[ 0.791354] usb20_host ff540000.usb: DWC OTG Controller
[ 0.791383] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[ 0.791413] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[ 0.791505] Init: Power Port (0)
[ 0.791561] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.791578] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.791592] usb usb3: Product: DWC OTG Controller
[ 0.791606] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[ 0.791619] usb usb3: SerialNumber: ff540000.usb
[ 0.792001] hub 3-0:1.0: USB hub found
[ 0.792028] hub 3-0:1.0: 1 port detected
[ 0.792702] usbcore: registered new interface driver xpad
[ 0.792762] usbcore: registered new interface driver usb_acecad
[ 0.792809] usbcore: registered new interface driver aiptek
[ 0.792855] usbcore: registered new interface driver gtco
[ 0.792902] usbcore: registered new interface driver hanwang
[ 0.792953] usbcore: registered new interface driver kbtab
[ 0.793016] usbcore: registered new interface driver wacom
[ 0.793029] ILITEK line = 3281: Enter
[ 0.793144] ILITEK line = 2937: Enter ilitek_i2c_probe +++++++++ client->addr = 0x41++++++
[ 0.793193] ILITEK line = 2639: 2639,ilitek_request_io_port,ilitek_request_io_port gpio_free(i2c.reset_gpio); reset_gpio = 229  i2c.irq_gpio = 230
[ 0.793210] ------------[ cut here ]------------
[ 0.793236] WARNING: at drivers/gpio/gpiolib.c:1519 gpiod_free+0xe0/0xfc()
[ 0.793247] Modules linked in:
[ 0.793265] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.10.0 #14
[ 0.793304] [<c0013ec4>] (unwind_backtrace+0x0/0xe0) from [<c001176c>] (show_stack+0x10/0x14)
[ 0.793329] [<c001176c>] (show_stack+0x10/0x14) from [<c0036988>] (warn_slowpath_common+0x4c/0x68)
[ 0.793351] [<c0036988>] (warn_slowpath_common+0x4c/0x68) from [<c00369bc>] (warn_slowpath_null+0x18/0x1c)
[ 0.793372] [<c00369bc>] (warn_slowpath_null+0x18/0x1c) from [<c029d224>] (gpiod_free+0xe0/0xfc)
[ 0.793400] [<c029d224>] (gpiod_free+0xe0/0xfc) from [<c050e430>] (ilitek_request_io_port+0xe4/0x1e8)
[ 0.793423] [<c050e430>] (ilitek_request_io_port+0xe4/0x1e8) from [<c0510b94>] (ilitek_i2c_probe+0xe4/0x3d4)
[ 0.793450] [<c0510b94>] (ilitek_i2c_probe+0xe4/0x3d4) from [<c052417c>] (i2c_device_probe+0xa8/0xd4)
[ 0.793478] [<c052417c>] (i2c_device_probe+0xa8/0xd4) from [<c0308ca0>] (really_probe+0xa8/0x20c)
[ 0.793501] [<c0308ca0>] (really_probe+0xa8/0x20c) from [<c0308efc>] (driver_probe_device+0x30/0x48)
[ 0.793524] [<c0308efc>] (driver_probe_device+0x30/0x48) from [<c0308f74>] (__driver_attach+0x60/0x84)
[ 0.793546] [<c0308f74>] (__driver_attach+0x60/0x84) from [<c030773c>] (bus_for_each_dev+0x50/0x90)
[ 0.793567] [<c030773c>] (bus_for_each_dev+0x50/0x90) from [<c03084f0>] (bus_add_driver+0xac/0x20c)
[ 0.793589] [<c03084f0>] (bus_add_driver+0xac/0x20c) from [<c0309460>] (driver_register+0x9c/0x138)
[ 0.793611] [<c0309460>] (driver_register+0x9c/0x138) from [<c0525eb8>] (i2c_register_driver+0x40/0xac)
[ 0.793631] [<c0525eb8>] (i2c_register_driver+0x40/0xac) from [<c050ea40>] (ilitek_init+0x34/0x78)
[ 0.793653] [<c050ea40>] (ilitek_init+0x34/0x78) from [<c00086a4>] (do_one_initcall+0x34/0xc8)
[ 0.793677] [<c00086a4>] (do_one_initcall+0x34/0xc8) from [<c0b82b28>] (do_initcalls+0x70/0xa0)
[ 0.793697] [<c0b82b28>] (do_initcalls+0x70/0xa0) from [<c0b82be8>] (kernel_init_freeable+0x90/0x130)
[ 0.793722] [<c0b82be8>] (kernel_init_freeable+0x90/0x130) from [<c083003c>] (kernel_init+0x8/0xe4)
[ 0.793749] [<c083003c>] (kernel_init+0x8/0xe4) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[ 0.793780] ---[ end trace c2a8e57315c42696 ]---
[ 0.793844] ILITEK line = 2983: ilitek i2c.irq_gpio = 230, i2c.client->irq = 193
[ 0.793858] ILITEK line = 223: Enter 10 ilitek_reset
[ 0.883323] dwc_otg_hcd_suspend, usb device mode
[ 1.020662] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.070579] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.099714] usb 1-1: new high-speed USB device number 2 using rockchip_ehci_host
[ 1.129622] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.188656] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.247300] ILITEK line = 453: ilitek_i2c_write_and_read, i2c write error, ret = -11
[ 1.247968] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 1.247986] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.248001] usb 1-1: Product: USB 2.0 Hub
[ 1.248576] hub 1-1:1.0: USB hub found
[ 1.248703] hub 1-1:1.0: 4 ports detected
[ 1.267935] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.326956] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.386007] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.445045] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.503144] ILITEK line = 462: ilitek_i2c_write_and_read, i2c read error, ret = -11
[ 1.503163] ILITEK line = 2444: ilitek_i2c_read_tp_info, MCU KERNEL version:255.255.255.255.255
[ 1.503578] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.562588] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.621620] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.680668] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.739303] ILITEK line = 453: ilitek_i2c_write_and_read, i2c write error, ret = -11
[ 1.759785] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.818829] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.877868] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.936910] ILITEK line = 350: ilitek_i2c_transfer err
[ 1.995151] ILITEK line = 462: ilitek_i2c_write_and_read, i2c read error, ret = -11
[ 1.995167] ILITEK line = 3035: ilitek read tp info fail free gpio
[ 1.995195] ilitek_i2c: probe of 4-0041 failed with error -1
[ 1.995604] sensor_register_slave:mma8452,id=17
[ 1.995618] sensor_register_slave:gs_mc3230,id=23
[ 1.995628] gsensor_init
[ 1.995639] sensor_register_slave:mpu6880_acc,id=24
[ 1.995650] sensor_register_slave:mpu6500_acc,id=25
[ 1.995661] sensor_register_slave:cm3217,id=48
[ 1.995672] sensor_register_slave:cm3218,id=49
[ 2.000633] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[ 2.000684] i2c /dev entries driver
[ 2.001299] IR NEC protocol handler initialized
[ 2.001313] IR RC5(x) protocol handler initialized
[ 2.001323] IR RC6 protocol handler initialized
[ 2.001333] IR JVC prhtolorkh2ndle $initialized
[ 2.001344] IR Sony protocol handler initialized
[ 2.001353] IR RC5 (streamzap) protocol handler initialized
[ 2.001363] IR SANYO protocol handler initialized
[ 2.001373] IR MCE Keyboard/mouse protocol handler initialized
[ 2.001546] usbcore: registered new interface driver uvcvideo
[ 2.001559] USB Video Class driver (1.1.1)
[ 2.001573] CamSys driver version: v0.32.0,  CamSys head file version: v0.11.0
[ 2.002607] D1:camsys_mipiphy_probe_cb(115): compatible is rockchip,rk3288
[ 2.002607]
[ 2.002687] D1:camsys_mipiphy_probe_cb(186): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[ 2.002860] D1:camsys_mipiphy_probe_cb(183): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xe31f8000  size: 0x4000)
[ 2.003504] D1:camsys_platform_probe(1394): ff910000.isp memory:
[ 2.003524] D1:camsys_platform_probe(1404):    Register memory (phy: 0xff910000 vir: 0xe3220000 size: 0x10000)
[ 2.003540] D1:camsys_platform_probe(1399):    I2c memory (phy: 0x1df9c000 vir: 0xddf9c000 size: 0x1000)
[ 2.003555] D1:camsys_init_ext_fsh_module(20): init external flash module
[ 2.003567] D1:camsys_platform_probe(1419): Probe ff910000.isp device success
[ 2.003915] not find test_power_init dev node
[ 2.003976] i2c-core: driver [bq27320] using legacy suspend method
[ 2.003989] i2c-core: driver [bq27320] using legacy resume method
[ 2.004317] rockchip_temp_probe,line=362
[ 2.054190] tsadc ff280000.tsadc: initialized
[ 2.054570] device-mapper: uevent: version 1.0.3
[ 2.054826] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[ 2.055141] Bluetooth: HCI UART driver ver 2.2
[ 2.055157] Bluetooth: HCI H4 protocol initialized
[ 2.055169] Bluetooth: HCILL protocol initialized
[ 2.055180] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.21
[ 2.055192] rtk_btusb: Register usb char device interface for BT driver
[ 2.055374] usbcore: registered new interface driver rtk_btusb
[ 2.060100] cpufreq version 1.0, suspend freq 1200 MHz
[ 2.060299] cpuidle: using governor ladder
[ 2.060312] cpuidle: using governor menu
[ 2.060348] Synopsys Designware Multimedia Card Interface Driver
[ 2.060360] MHSC version = Ver 2.00 2015-06-10
[ 2.060648] dw cru_regsbase addr 0x1d8.
[ 2.060661] dw cru_reset_offset val 3.
[ 2.060677] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[ 2.060722] dwmmc_rockchip ff0f0000.rksdmmc: failed to get hpclk_mmc
[ 2.061028] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[ 2.061200] dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[ 2.061327] 1358..dw_mci_set_ios:  no card. [mmc0]
[ 2.073887] 1358..dw_mci_set_ios:  no card. [mmc0]
[ 2.093588] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[ 2.093606] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[ 2.093616] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[ 2.093919] dw cru_regsbase addr 0x1d8.
[ 2.093933] dw cru_reset_offset val 0.
[ 2.093948] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[ 2.093986] dwmmc_rockchip ff0c0000.rksdmmc: failed to get hpclk_mmc
[ 2.094758] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[ 2.094910] dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc1]
[ 2.095361] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[ 2.095429] 1358..dw_mci_set_ios:  no card. [mmc1]
[ 2.113233] 1358..dw_mci_set_ios:  no card. [mmc1]
[ 2.125690] mmc0: BKOPS_EN bit is not set
[ 2.127560] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
[ 2.129841] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 2.129865] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[ 2.129885] [mmc0] tuning regsbase addr 0x218.
[ 2.130478] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000088]
[ 2.130488] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
[ 2.130517] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:0, data.error:-84
[ 2.130543] [mmc0] Data transmission error !!!!  MINTSTS: [0x00002000]
[ 2.130553] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
[ 2.130580] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[ 2.130824] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-180 (17 len)
[ 2.130836] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 214-282 (7 len)
[ 2.130847] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-180 (17 len)
[ 2.130857] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 90
[ 2.130903] mmc0: new HS200 MMC card at address 0001
[ 2.131188] mmcblk0: mmc0:0001 AWPD3R 14.5 GiB
[ 2.131500]    uboot: 0x000400000 -- 0x000800000 (4 MB)
[ 2.131513]    misc: 0x000800000 -- 0x000c00000 (4 MB)
[ 2.131523] resource: 0x000c00000 -- 0x001c00000 (16 MB)
[ 2.131532]    kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[ 2.131541]    boot: 0x002c00000 -- 0x004c00000 (32 MB)
[ 2.131549] recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[ 2.131558]    backup: 0x006c00000 -- 0x00a000000 (52 MB)
[ 2.131567]    cache: 0x00a000000 -- 0x012000000 (128 MB)
[ 2.131576]    kpanic: 0x012000000 -- 0x012400000 (4 MB)
[ 2.131584]    system: 0x012400000 -- 0x072400000 (1536 MB)
[ 2.131593] metadata: 0x072400000 -- 0x073400000 (16 MB)
[ 2.131601] baseparamer: 0x073400000 -- 0x073800000 (4 MB)
[ 2.131610] userdata: 0x073800000 -- 0x0b3800000 (1024 MB)
[ 2.131618] radical_update: 0x0b3800000 -- 0x0b7800000 (64 MB)
[ 2.131627]    user: 0x0b7800000 -- 0x3a3a00000 (11970 MB)
[ 2.131657]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15[ 2.132980] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[ 2.132994] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
1358..dw_mci_set_ios:  no card. [mmc1]
[ 2.133310] dw cru_regsbase addr 0x1d8.
[ 2.133319] dw cru_reset_offset val 1.
[ 2.133329] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[ 2.133363] dwmmc_rockchip ff0d0000.rksdmmc: failed to get hpclk_mmc
[ 2.133581] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[ 2.133707] dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[ 2.133970] 1358..dw_mci_set_ios:  no card. [mmc2]
[ 2.152600] 1358..dw_mci_set_ios:  no card. [mmc2]
[ 2.172282] 1358..dw_mci_set_ios:  no card. [mmc2]
[ 2.172302] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[ 2.172315] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[ 2.172587] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.174078] usbcore: registered new interface driver usbhid
[ 2.174088] usbhid: USB HID core driver
[ 2.174205] ashmem: initialized
[ 2.174311] logger: created 256K log 'log_main'
[ 2.174399] logger: created 256K log 'log_events'
[ 2.174496] logger: created 256K log 'log_radio'
[ 2.174588] logger: created 256K log 'log_system'
[ 2.175806] input: rk29-keypad as /devices/ff100000.adc/key.32/input/input0
[ 2.176674] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ff890000.rockchip-i2s; cannot claim for 2-0010
[ 2.176693] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
[ 2.176705] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
[ 2.176717] ES8323 2-0010: Error applying setting, reverse things back
[ 2.177176] es8323_i2c_probe:register ISR (irq=196)
[ 2.177828] rockchip-spdif ff8b0000.rockchip-spdif: spdif ready.
[ 2.178146] es8323_probe
[ 2.767582] EHCI: rk_ehci_hcd_enable, enable host controller
[ 2.925536] rockchip-es8323 rockchip-es8323.29:  ES8323 HiFi <-> ff890000.rockchip-i2s mapping ok
[ 2.927774] rockchip-hdmi-i2s rockchip-hdmi-i2s.27:  rk-hdmi-i2s-hifi <-> ff890000.rockchip-i2s mapping ok
[ 2.928098] u32 classifier
[ 2.928105]    Actions configured
[ 2.928116] Netfilter messages via NETLINK v0.30.
[ 2.928164] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.928416] ctnetlink v0.93: registering with nfnetlink.
[ 2.928473] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 2.928480] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 2.928689] xt_time: kernel timezone is -0000
[ 2.928846] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.928951] arp_tables: (C) 2002 David S. Miller
[ 2.928983] TCP: cubic registered
[ 2.928989] Initializing XFRM netlink socket
[ 2.929156] NET: Registered protocol family 10
[ 2.929565] mip6: Mobile IPv6
[ 2.929586] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.929688] sit: IPv6 over IPv4 tunneling driver
[ 2.929988] NET: Registered protocol family 17
[ 2.930009] NET: Registered protocol family 15
[ 2.930052] Bridge firewalling registered
[ 2.930062] Ebtables v2.0 registered
[ 2.930197] Bluetooth: RFCOMM TTY layer initialized
[ 2.930216] Bluetooth: RFCOMM socket layer initialized
[ 2.930223] Bluetooth: RFCOMM ver 1.11
[ 2.930230] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.930235] Bluetooth: BNEP filters: protocol multicast
[ 2.930245] Bluetooth: BNEP socket layer initialized
[ 2.930251] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.930261] Bluetooth: HIDP socket layer initialized
[ 2.930282] l2tp_core: L2TP core driver, V2.0
[ 2.930293] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[ 2.930299] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 2.930480] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 2.930489] [WLAN_RFKILL]: can't find rockchip,grf property
[ 2.930497] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6212
[ 2.930504] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 2.930511] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[ 2.930519] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 2.930537] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[ 2.930554] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[ 2.930561] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 2.930586] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 3.3V
[ 2.930594] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 2.930629] [BT_RFKILL]: Enter rfkill_rk_init
[ 2.930750] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[ 2.930768] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[ 2.930779] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[ 2.930790] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[ 2.930829] [BT_RFKILL]: Request irq for bt wakeup host
[ 2.930916] [BT_RFKILL]: ** disable irq
[ 2.930978] [BT_RFKILL]: ap6335 device registered.
[ 2.931569] rk3288_init_suspend
[ 2.931581] rk3288_suspend_init enter
[ 2.931761] rk3288_suspend_init: pm_ctrbits =200007
[ 2.931787] gpio_get_dts_info suspend:4
[ 2.931793] gpio_get_dts_info resume:4
[ 2.931798] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 2.931820] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[ 2.931938] clks_gating_suspend_init:clkgt info ok
[ 2.932019] Registering SWP/SWPB emulation handler
[ 2.932029] rockchip_uboot_mem_late_init: Freeing uboot logo memory: 0x02000000@0x7dc00000
[ 2.934413] ddrfreq: verion 1.2 20140526
[ 2.934426] ddrfreq: normal 456MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 456MHz
[ 2.934434] ddrfreq: auto-freq=0
[ 2.934439] ddrfreq: auto-freq-table[0] 240MHz
[ 2.934444] ddrfreq: auto-freq-table[1] 324MHz
[ 2.934448] ddrfreq: auto-freq-table[2] 456MHz
[ 2.934453] ddrfreq: auto-freq-table[3] 528MHz
[ 2.950585] regulator-dummy: disabling
[ 2.950655] =======================================================
[ 2.950662] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 2.950667] =======================================================
[ 2.950672]  WiFi driver (Powered by Rockchip,Ver 5.10.WFD.OOB.64bit) init.
[ 2.950714] dhd_module_init: in
[ 2.950720] ======== bcm_wlan_set_plat_data ========
[ 2.950725] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 2.950742] host_oob_irq: 198
[ 2.950747] host_oob_irq_flags=4
[ 2.950751] dhd_wifi_platform_load: Enter
[ 2.950765] pcd_pullup, is_on 0
[ 2.950768] Power-up adapter 'DHD generic adapter'
[ 2.950782] wifi_platform_set_power = 1
[ 2.950787] ======== PULL WL_REG_ON HIGH! ========
[ 2.950792] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 2.950798] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[ 2.950802] file system registered
[ 2.950807] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 2.951268] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 2.951276] android_usb gadget: Number of LUNs=2
[ 2.951283]  lun0: LUN: removable file: (no medium)
[ 2.951288]  lun1: LUN: removable file: (no medium)
[ 2.951405] android_usb gadget: android_usb ready
[ 2.951464] sensor_init: Probe name sensors
[ 2.951478] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[ 2.952003] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:29:19 UTC (1293884959)
[ 2.956253] rockchip_headset_probe() Can not read property headset_gpio
[ 2.956266] rockchip_headset: probe of rockchip_headset.31 failed with error -2
[ 2.956675] usbcore: registered new interface driver snd-usb-audio
[ 2.956683] ALSA device list:
[ 2.956688] #0: RK_ES8323
[ 2.956692] #1: RK-HDMI-I2S
[ 2.956925] Freeing unused kernel memory: 356K (c0b82000 - c0bdb000)
[ 3.057860] [WLAN_RFKILL]: wifi turn on power. 156
[ 3.080633] type=1403 audit(1293884959.620:2): policy loaded auid=4294967295 ses=4294967295
[ 3.100791] init: could not import file 'init.box.samba.rc' from '/init.rk30board.rc'
[ 3.102320] init: invalid gid 'trace'
[ 3.181163] init: /dev/hw_random not found
[ 3.181222] keychord: using input dev rk29-keypad for fevent
[ 3.185529] init: /dev/hw_random not found
[ 3.186361] fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[ 3.187127] resize2fs: resize2fs 1.42.9 (28-Dec-2013)resize2fs: The filesystem is already 393216 blocks long.  Nothing to do!resize2fs:
[ 3.189576] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
[ 3.194479] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 3.194556] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/system,/system,ext4)=0
[ 3.195296] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[ 3.200404] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.200441] e2fsck: system: clean, 1857/80256 files, 108990/393216 blocks
[ 3.204114] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[ 3.204172] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/system,target=/system,type=ext4)=0
[ 3.208120] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 3.208175] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/cache,target=/cache,type=ext4)=0
[ 3.208459] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
[ 3.212086] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 3.212131] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,/metadata,ext4)=0
[ 3.212793] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata
[ 3.217011] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.217040] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata: clean, 11/1024 files, 1102/4096 blocks
[ 3.220955] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[ 3.221012] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,target=/metadata,type=ext4)=0
[ 3.221048] fs_mgr: Running /system/bin/fsck.f2fs -f /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
[ 3.221838] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory
[ 3.221869] fsck.f2fs: fsck.f2fs terminated by exit(255)
[ 3.222074] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=f2fs)=-1
[ 3.222351] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[ 3.226032] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[ 3.226080] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,/data,ext4)=0
[ 3.226756] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
[ 3.231492] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[ 3.231519] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata: clean, 604/65536 files, 30781/262144 blocks
[ 3.235523] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,errors=panic
[ 3.235572] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=ext4)=0
[ 3.235586] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata on /data with fs_type=ext4 instead of f2fs
[ 3.249152] arm_release_ver of this mali_ko is 'r6p0-02rel0', rk_ko_ver is '13', built at '09:15:10', on 'Oct 22 2015'.
[ 3.249219] mali ffa30000.gpu: Continuing without Mali clock control
[ 3.249251] mali pd enabled
[ 3.249258] clk enabled
[ 3.249268] MALI_DVFS_STEP = 4, div_dvfs = 10
[ 3.249273] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
[ 3.249280] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
[ 3.249286] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
[ 3.249292] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
[ 3.249379] turn on mali power
[ 3.249387] kbase_platform_rk_init,register_reboot_notifier
[ 3.249424] hrtimer: interrupt took 10500 ns
[ 3.249507] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
[ 3.250160] mali ffa30000.gpu: Probed as mali0
[ 3.251163] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 3.251783] rk29_ipp: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 3.252338] rk29_ipp: version magic '3.0.101+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 3.253215] zram0: detected capacity change from 0 to 533413888
[ 3.264521] wifi_platform_bus_enumerate device present 1
[ 3.264534] ======== Card detection to detect SDIO card! ========
[ 3.264542] mmc2:mmc host rescan start!
[ 3.299210] Adding 520908k swap on /dev/block/zram0.  Priority:-1 extents:1 across:520908k SS
[ 3.324308] EXT4-fs (mmcblk0p13): Unrecognized mount option "background_gc=on" or missing value
[ 3.331817] bat_cap: oldcap path is /sys/devices/ff100000.adc
[ 3.331858] bat_cap: oldcap_path no exist
[ 3.331985] binder: 145:145 transaction failed 29189, size 0-0
[ 3.332311] init: Warning!  Service displayd needs a SELinux domain defined; please fix!
[ 3.335917] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[ 3.335934] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[ 3.336108] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[ 3.336484] rtk_btusb: btchr_open: BT usb char device is opening
[ 3.336492] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 3.336503] rtk_btusb: btchr_open: BT usb char device is opening
[ 3.336509] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 3.336523] rtk_btusb: btchr_open: BT usb char device is opening
[ 3.336528] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 3.336538] rtk_btusb: btchr_open: BT usb char device is opening
[ 3.336542] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 3.417019] logd.auditd: start
[ 3.419660] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[ 3.420982] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
[ 3.421357] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
[ 3.421565] init: Warning!  Service drmservice needs a SELinux domain defined; please fix!
[ 3.421786] init: cannot find '/system/bin/akmd', disabling 'akmd'
[ 3.422842] android_usb: already disabled
[ 3.425329] read descriptors
[ 3.425343] read strings
[ 3.425370] pcd_pullup, is_on 1
[ 3.480996] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc2]
[ 3.515760] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.517278] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.518785] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.521528] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.524883] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[ 3.609115] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 3.609139] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 3.609192] mmc2: error -110 whilst initialising SDIO card
[ 3.628607] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
[ 3.628619] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 600000Hz for init[mmc2]
[ 3.665869] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.667859] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.669860] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.674025] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.678489] mmc2: queuing unknown CIS tuple 0x81 (9 bytes)
[ 3.796599] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 3.796631] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 3.796694] mmc2: error -110 whilst initialising SDIO card
[ 3.815574] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 200000Hz, actual 200000HZ div = 125)
[ 3.815589] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 400000Hz for init[mmc2]
[ 3.876629] rk3288-lcdc lcdc0: blank mode:0
[ 4.044485] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 4.044520] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc2]
[ 4.044578] mmc2: error -110 whilst initialising SDIO card
[ 4.316670] healthd: No charger supplies found
[ 4.316685] healthd: No battery devices found
[ 5.232512] failed to power up DHD generic adapter, 0 retry left
[ 5.248343] wifi_platform_set_power = 0
[ 5.248354] ======== PULL WL_REG_ON LOW! ========
[ 5.248360] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 5.350585] [WLAN_RFKILL]: wifi shut off power.
[ 5.350598] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[ 5.350604] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 5.350611] wifi_platform_bus_enumerate device present 0
[ 5.350616] ======== Card detection to remove SDIO card! ========
[ 5.350621] mmc2:mmc host rescan start!
[ 5.350634] failed to power up DHD generic adapter, max retry reached**
[ 5.350654] unregister wifi platform drivers
[ 5.350660] wifi_platform_bus_enumerate device present 0
[ 5.350664] ======== Card detection to remove SDIO card! ========
[ 5.350669] mmc2:mmc host rescan start!
[ 5.350676] dhd_module_init: Failed to load the driver, try cnt 0
[ 5.350692] dhd_module_init: Failed to load driver max retry reached**
[ 5.350697] dhd_module_init: Exit err=-19
[ 5.831427] warning: `system_server' uses 32-bit capabilities (legacy support in use)
[ 7.329301] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.329324] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.329334] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 7.329428] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 7.329443] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 7.329472] rockchip_gpio_request:GPIO7-13
[ 7.329483] rockchip_gpio_set:GPIO7-13 level = 1
[ 7.329490] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 7.329499] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 7.329509] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 7.329517] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 7.329539] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8825) register success
[ 7.334585] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 7.334596] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 7.334701] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 7.334730] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 7.335794] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 7.336848] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.337905] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 7.339961] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.340034] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 7.340044] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.340056] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 7.341152] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 7.341180] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 7.343239] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 7.343255] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 7.343266] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.343273] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.343281] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 7.349341] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.349354] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.349363] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 7.349453] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 7.349467] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 7.349503] rockchip_gpio_set:GPIO7-13 level = 1
[ 7.349510] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 7.349520] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 7.349529] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 7.349539] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 7.349553] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8858) register success
[ 7.354596] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 7.354607] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 7.354712] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 7.354741] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 7.355804] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 7.356859] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.357916] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 7.359968] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.359979] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.360036] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 7.360046] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.360058] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 7.361146] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 7.361174] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 7.363225] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 7.363241] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 7.363251] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.363259] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.363267] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 7.367667] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.367680] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.367689] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 7.367800] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 7.367814] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 7.367848] rockchip_gpio_set:GPIO7-13 level = 1
[ 7.367855] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 7.367865] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 7.367875] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 7.367884] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 7.367897] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[ 7.372955] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 7.372971] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 7.373077] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 7.373107] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 7.374177] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 7.375233] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.376301] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 7.378352] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.378362] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.378431] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 7.378442] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.378454] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 7.379540] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 7.379571] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 7.381627] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 7.381642] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 7.381652] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.381660] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.381668] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 7.385579] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.385590] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.385600] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 7.385690] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 7.385704] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 7.385742] rockchip_gpio_set:GPIO7-13 level = 1
[ 7.385749] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 7.385758] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 7.385769] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 7.385777] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 7.385791] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV5648) register success
[ 7.390838] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 7.390849] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 7.390955] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 7.390983] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 7.392054] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 7.393112] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.394179] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 7.396229] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.396240] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.396301] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 7.396310] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.396322] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 7.397410] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 7.397437] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 7.399492] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 7.399508] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 7.399518] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.399526] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.399534] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 7.404646] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.404659] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.404668] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 7.404757] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 1) for dev_id 0x1000000 success!
[ 7.404771] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x1000000 success!
[ 7.404781] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[ 7.404878] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: OV2659) register success
[ 7.409925] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 7.409937] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 7.410043] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 7.410071] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 7.411138] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 7.412200] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.413265] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 0
[ 7.415312] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.415387] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 1
[ 7.415399] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.415414] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 7.416499] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 7.416528] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 7.418592] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[ 7.418611] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 7.418622] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.418630] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.418638] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 7.422935] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.422947] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 7.422956] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 7.423051] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 7.423066] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 7.423075] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[ 7.423101] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: TC358749XBG) register success
[ 7.428147] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 7.428158] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 7.428264] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 7.428292] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[ 7.429367] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 7.430423] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.431493] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 7.433550] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.433562] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 7.433632] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 7.433643] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 7.433656] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 7.434752] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 7.434783] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 7.436841] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 7.436857] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 7.436868] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.436876] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 7.436884] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 8.610621] healthd: battery none chg=
[ 8.676527] [otg id chg] last id -1 current id 1
[ 8.676551] PortPower off
[ 8.676559] rk_battery_charger_detect_cb , battery_charger_detect 6
[ 8.776193] Using Buffer DMA mode
[ 8.776208] Periodic Transfer Interrupt Enhancement - disabled
[ 8.776213] Multiprocessor Interrupt Enhancement - disabled
[ 8.776219] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 8.776224] ^^^^^^^^^^^^^^^^^Device Mode
[ 8.798582] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[ 8.798598] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[ 8.798603] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[ 8.798608] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[ 8.798613] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[ 8.798618] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[ 8.798623] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[ 9.141542] acc_open
[ 9.141567] acc_release
[ 9.266916] ***************vbus detect*****************
[ 9.269107] rk_battery_charger_detect_cb , battery_charger_detect 1
[ 9.446158] Using Buffer DMA mode
[ 9.446174] Periodic Transfer Interrupt Enhancement - disabled
[ 9.446182] Multiprocessor Interrupt Enhancement - disabled
[ 9.446189] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 9.446196] ^^^^^^^^^^^^^^^^^Device Mode
[ 9.446237] *******************soft connect!!!*******************
[ 9.561278] USB RESET
[ 9.652114] android_work: sent uevent USB_STATE=CONNECTED
[ 9.655846] USB RESET
[ 9.775953] android_usb gadget: high-speed config #1: android
[ 9.776068] android_work: sent uevent USB_STATE=CONFIGURED
[ 10.223482] phy_power_on: enable = 1
[ 10.346534] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[ 10.346574] eth0: device MAC address 56:0b:fe:5a:f7:c6
[ 10.350805] libphy: stmmac: probed
[ 10.350817] eth0: PHY ID 001cc916 at 0 IRQ 192 (stmmac-0:00) active
[ 10.350824] eth0: PHY ID 001cc916 at 1 IRQ 192 (stmmac-0:01) active
[ 10.693166] dwc_otg_hcd_resume, usb device mode
[ 10.792288] dwc_otg_hcd_suspend, usb device mode
[ 10.861049] usb 1-1: USB disconnect, device number 2
[ 11.136535] usb 1-1: new high-speed USB device number 3 using rockchip_ehci_host
[ 11.164291] FAT-fs (mmcblk0p15): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 11.190904] init: no such service 'fuse_internal_sd'
[ 11.284747] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
[ 11.284769] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 11.284778] usb 1-1: Product: USB 2.0 Hub
[ 11.285775] hub 1-1:1.0: USB hub found
[ 11.286012] hub 1-1:1.0: 4 ports detected
[ 11.558381] pm policy 0 -> 1
[ 12.723915] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.723934] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.723942] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.724013] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.724025] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.724058] rockchip_gpio_set:GPIO7-13 level = 1
[ 12.724063] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 12.724072] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 12.724080] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 12.724088] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 12.724107] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8825) register success
[ 12.729146] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.729158] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.729263] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.729286] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.730349] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.731404] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.732465] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.734502] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.734560] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.734568] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.734579] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.735651] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.735670] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.737715] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.737726] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.737735] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.737741] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.737747] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.738400] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.738409] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.738416] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.738485] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.738496] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.738527] rockchip_gpio_set:GPIO7-13 level = 1
[ 12.738532] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 12.738539] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 12.738548] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 12.738555] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 12.738568] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8858) register success
[ 12.743608] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.743620] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.743724] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.743748] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.744812] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.745831] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.746890] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.748928] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.748937] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.748996] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.749003] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.749014] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.750094] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.750117] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.752159] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.752171] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.752180] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.752186] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.752192] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.752762] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.752772] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.752779] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.752845] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.752857] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.752888] rockchip_gpio_set:GPIO7-13 level = 1
[ 12.752893] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 12.752902] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 12.752910] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 12.752917] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 12.752929] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[ 12.757951] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.757959] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.758063] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.758081] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.759148] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.760204] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.761259] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.763298] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.763306] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.763355] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.763363] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.763373] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.764449] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.764473] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.766518] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.766528] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.766537] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.766543] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.766549] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.767065] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.767074] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.767080] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.767146] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.767158] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.767187] rockchip_gpio_set:GPIO7-13 level = 1
[ 12.767193] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 12.767201] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 12.767209] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 12.767216] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 12.767228] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV5648) register success
[ 12.772244] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.772252] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.772357] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.772373] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.773431] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.774483] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.775542] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.777579] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.777586] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.777628] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.777636] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.777646] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.778718] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.778737] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.780779] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.780789] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.780796] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.780802] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.780808] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.781221] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.781229] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.781237] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.781295] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 1) for dev_id 0x1000000 success!
[ 12.781306] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x1000000 success!
[ 12.781314] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[ 12.781396] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: OV2659) register success
[ 12.786415] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.786424] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.786528] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.786546] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.787604] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.788655] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.789716] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 0
[ 12.791757] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.791807] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 1
[ 12.791815] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.791825] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.792895] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.792914] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.794956] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[ 12.794966] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.794974] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.794980] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.794986] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.795633] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.795643] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.795650] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.795709] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.795720] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.795727] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[ 12.795744] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: TC358749XBG) register success
[ 12.800766] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.800774] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.800878] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.800897] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[ 12.801956] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.803008] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.804063] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.806099] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.806106] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.806149] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.806157] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.806167] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.807238] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.807255] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.809304] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.809316] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.809324] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.809331] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.809337] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.818291] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.818303] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.818310] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.818383] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.818395] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.818428] rockchip_gpio_set:GPIO7-13 level = 1
[ 12.818434] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 12.818442] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 12.818450] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 12.818458] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 12.818476] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8825) register success
[ 12.823510] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.823519] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.823624] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.823648] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.824712] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.825766] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.826821] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.828862] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.828921] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.828930] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.828940] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.830020] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.830046] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.832092] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.832104] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.832112] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.832118] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.832124] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.832756] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.832765] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.832771] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.832841] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.832852] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.832881] rockchip_gpio_set:GPIO7-13 level = 1
[ 12.832887] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 12.832894] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 12.832902] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 12.832909] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 12.832921] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV8858) register success
[ 12.837947] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.837955] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.838060] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.838080] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.839139] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.840191] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.841257] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.843298] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.843306] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.843354] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.843362] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.843372] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.844448] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.844472] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.846516] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.846529] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.846537] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.846543] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.846549] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.847069] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.847078] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.847085] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.847150] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.847161] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.847189] rockchip_gpio_set:GPIO7-13 level = 1
[ 12.847195] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 12.847202] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 12.847210] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 12.847216] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 12.847227] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[ 12.852243] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.852251] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.852355] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.852372] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.853430] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.854482] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.855536] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.857592] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.857602] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.857662] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.857671] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.857682] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.858764] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.858795] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.860851] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.860866] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.860877] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.860883] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.860889] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.861494] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.861504] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.861512] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.861582] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.861594] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.861630] rockchip_gpio_set:GPIO7-13 level = 1
[ 12.861635] rockchip_gpio_direction_output:set GPIO7-13 level 1
[ 12.861645] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[ 12.861654] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0xf024,result=0xf024
[ 12.861662] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[ 12.861676] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV5648) register success
[ 12.866703] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.866712] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.866817] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.866841] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.867898] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.868956] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.870012] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.872047] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.872055] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.872101] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.872109] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.872119] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.873163] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.873216] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.875274] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.875323] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.875346] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.875353] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.875360] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.876026] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.876036] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.876042] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.876115] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 1) for dev_id 0x1000000 success!
[ 12.876126] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x1000000 success!
[ 12.876135] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[ 12.876225] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: OV2659) register success
[ 12.881255] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.881267] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.881371] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.881396] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[ 12.882457] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.883507] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.884560] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 0
[ 12.886596] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.886645] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 1
[ 12.886653] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.886663] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.887725] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.887743] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.889817] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[ 12.889831] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.889841] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.889847] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.889854] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 12.890718] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.890730] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[ 12.890737] D1:camsys_open(739): camsys_marvin(ddd5e710) is opened!
[ 12.890813] D1:camsys_extdev_register(243): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[ 12.890832] D1:camsys_extdev_register(243): Get RK30_PIN0_PC1(17) gpio(active: 1) for dev_id 0x2000000 success!
[ 12.890841] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[ 12.890876] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: TC358749XBG) register success
[ 12.895918] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[ 12.895929] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[ 12.896033] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[ 12.896058] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[ 12.897128] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(17) set 1
[ 12.898180] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.899236] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(79) set 1
[ 12.901271] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.901279] E:camsys_i2c_write(36): Get 3 i2c adapter is failed!
[ 12.901328] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(79) set 0
[ 12.901336] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[ 12.901346] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(17) set 0
[ 12.902409] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[ 12.902428] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[ 12.904470] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[ 12.904483] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[ 12.904492] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.904498] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[ 12.904505] D1:camsys_release(763): camsys_marvin(ddd5e710) is closed
[ 31.937864] pcd_pullup, is_on 0
[ 31.957026] read descriptors
[ 31.957152] read strings
[ 31.957291] pcd_pullup, is_on 1
[ 32.893082] **************soft reconnect**************
[ 33.072995] Using Buffer DMA mode
[ 33.073010] Periodic Transfer Interrupt Enhancement - disabled
[ 33.073019] Multiprocessor Interrupt Enhancement - disabled
[ 33.073027] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 33.073034] ^^^^^^^^^^^^^^^^^Device Mode
[ 33.073075] *******************soft connect!!!*******************
[ 33.187588] USB RESET
[ 33.281782] USB RESET
[ 33.398362] android_usb gadget: high-speed config #1: android
[ 33.399309] android_work: sent uevent USB_STATE=CONFIGURED
[ 42.461677] rk3288-lcdc lcdc0: blank mode:4
[ 42.480861] suspend_flag=1
[ 42.486871] CPU1: shutdown
[ 45.019458] suspend_flag=1
[ 45.036656] CPU1: Booted secondary processor
[ 45.069876] rk32-edp rk32-edp: edp pll locked
[ 45.069889] rk32_edp_init_aux
[ 45.069894] rk32_edp_reset_aux
[ 45.070518] rk32_edp_init_training rate:10Gps lanes:2
[ 45.070529] rk32-edp rk32-edp: max link rate:2.70Gps max number of lanes:2
[ 45.074491] rk32-edp rk32-edp: link training success.
[ 45.128755] rk3288-lcdc lcdc0: blank mode:0

作者: xi0325 时间: 2017-3-20 12:15

loading 发表于 2017-3-15 18:32
把内核log 贴出来看看

另外还有个现象就是休眠唤醒休眠唤醒之后的现象之后屏幕显示这样，

作者: xi0325 时间: 2017-3-20 12:15

loading 发表于 2017-3-15 18:32
把内核log 贴出来看看

另外还有个现象就是休眠唤醒休眠唤醒之后的现象之后屏幕显示这样，

作者: loading 时间: 2017-3-20 13:34

xi0325 发表于 2017-3-20 12:15
另外还有个现象就是休眠唤醒休眠唤醒之后的现象之后屏幕显示这样，

从log看,edp 驱动加载也正常
试试在dts 里面把logo 这个关掉

作者: xi0325 时间: 2017-3-20 14:05

loading 发表于 2017-3-20 13:34
从log看,edp 驱动加载也正常
试试在dts 里面把logo 这个关掉

修改rockchip,uboot-logo-on = <0>，将logo关掉现象也还是一样
我另外点过一个1366x768的edp屏那个是可以正常点亮的，两个屏唯一的区别就是：1366x768的是1lane的 1920x1080的是2lane的

作者: xi0325 时间: 2017-3-20 15:05

abcxyztt 发表于 2017-3-20 14:50
那就应该要改驱动了

改驱动？要怎么改？刚刚接触rk3288 不是很熟悉

作者: xi0325 时间: 2017-3-20 15:17

loading 发表于 2017-3-20 13:34
从log看,edp 驱动加载也正常
试试在dts 里面把logo 这个关掉

我看你之前好像在rk3399上调试过一款N133HSG 1920x1080p edp的显示屏，也是2lane的吧？请问下硬件上接线有什么注意的地方吗？

作者: loading 时间: 2017-3-20 18:41

xi0325 发表于 2017-3-20 15:17
我看你之前好像在rk3399上调试过一款N133HSG 1920x1080p edp的显示屏，也是2lane的吧？请问下硬件上接线 ...

按定义来就可以,你是完整的屏线还是飞线?
可以修改这个地方试试
kernel/drivers/video/rockchip/transmitter/rk32_dp.c
- edp->video_info.link_rate = LINK_RATE_1_62GBPS;
- edp->video_info.lane_count = LANE_CNT4;
+ edp->video_info.link_rate = LINK_RATE_2_70GBPS;
+ edp->video_info.lane_count = LANE_CNT2;

作者: dianziit 时间: 2017-3-20 19:07
谢谢分享赞一个

作者: xi0325 时间: 2017-3-20 19:18

loading 发表于 2017-3-20 18:41
按定义来就可以,你是完整的屏线还是飞线?
可以修改这个地方试试
kernel/drivers/video/rockchip/transm ...

是飞线的，

作者: xi0325 时间: 2017-3-20 19:20

loading 发表于 2017-3-20 18:41
按定义来就可以,你是完整的屏线还是飞线?
可以修改这个地方试试
kernel/drivers/video/rockchip/transm ...

按你说的修改之后现象还是一样
但我这边发现个现象，反复休眠唤醒之后偶尔能显示正常，我怀疑是上电时序的问题，请问下你知道edp的上电时序大概在哪吗？

作者: loading 时间: 2017-3-20 20:46

xi0325 发表于 2017-3-20 19:20
按你说的修改之后现象还是一样
但我这边发现个现象，反复休眠唤醒之后偶尔能显示正常，我怀疑是上电 ...

就这个文件里面。。。kernel/drivers/video/rockchip/transmitter/rk32_dp.c
偶然能显示，，会不会是飞线有干扰呢？
我自己飞的3399-edp，，，刚开始也是只有背光两，，然后碰一下线又亮了，，结果发现是飞线有干扰导致的，拿导电胶布包一下就好了

作者: xi0325 时间: 2017-3-20 20:54

loading 发表于 2017-3-20 20:46
就这个文件里面。。。kernel/drivers/video/rockchip/transmitter/rk32_dp.c
偶然能显示，，会不会是飞 ...

应该不是飞线有干扰，我尝试将3.3v的电，休眠的时候也不关闭的话反复休眠唤醒都能正常显示了
我猜想应该是数据信号出来早了，电供的太晚。
能否详细说明下在哪个函数里边吗？

作者: loading 时间: 2017-3-20 21:21

xi0325 发表于 2017-3-20 20:54
应该不是飞线有干扰，我尝试将3.3v的电，休眠的时候也不关闭的话反复休眠唤醒都能正常显示了
我猜想应 ...

我猜想应该是数据信号出来早了，电供的太晚
---> 加打印看看，，我也不太清楚了，，

作者: xi0325 时间: 2017-3-21 18:24

loading 发表于 2017-3-20 21:21
我猜想应该是数据信号出来早了，电供的太晚
---> 加打印看看，，我也不太清楚了，，

我在rk3288_lcdc_clk_enable(lcdc_dev)之前添加延时，现在休眠唤醒正常，但是开机仍只亮背光，后边尝试将dts里边的uboot-logo-on改为0，开机过程能显示开机动画了，但是无法显示开机logo。
uboot-logo-on置0后，要怎样操作才能显示开机logo？？

作者: loading 时间: 2017-3-21 18:45
menuconfig 里面打开bootup logo 里面standard 224 xxx 那个

欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)