Firefly开源社区

标题: AIO-3588Q V1.1+Ubuntu20.04-Gnome-r30028_v1.1.1b_230914+没有wifi模块无法启动 [打印本页]

作者: forever5714 时间: 2023-12-27 10:46
标题: AIO-3588Q V1.1+Ubuntu20.04-Gnome-r30028_v1.1.1b_230914+没有wifi模块无法启动
使用的iCore-3588Q和AIO-3588Q的底板，没有wifi模块的时候系统无法启动，Debug接口停在了下面内容就不再输出（详细的打印见附件）：
[ 6.594718] Serial: 8250/16550 driver, 10 ports, IRQ sharing disabled
[ 6.595000] fd890000.serial: ttyS0 at MMIO 0xfd890000 (irq = 28, base_baud = 1500000) is a 16550A
[ 6.595287] feb40000.serial: ttyS1 at MMIO 0xfeb40000 (irq = 95, base_baud = 1500000) is a 16550A
[ 6.595476] feb80000.serial: ttyS5 at MMIO 0xfeb80000 (irq = 96, base_baud = 1500000) is a 16550A
[ 6.595713] feb90000.serial: ttyS6 at MMIO 0xfeb90000 (irq = 97, base_baud = 1500000) is a 16550A
[ 6.596619] random: fast init done
[ 6.596672] random: crng init done
[ 6.597390] rockchip-vop2 fdd90000.vop: Adding to iommu group 15
[ 6.597404] iommu: Failed to allocate default IOMMU domain of type 4 for group (null) - Falling back to IOMMU_DOMAIN_DMA
[ 6.604931] panel-simple-dsi fde20000.dsi.0: supply power not found, using dummy regulator
[ 6.783735] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.809282] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.835948] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.862616] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.889281] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.915948] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.942615] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.969281] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 6.995949] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 7.022615] rk-pcie fe170000.pcie: PCIe Linking... LTSSM is 0x3
[ 9.449279] rk-pcie fe170000.pcie: PCIe Link Fail
[ 9.449300] rk-pcie fe170000.pcie: failed to initialize host
[ 66.589245] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:
[ 66.589256] rcu:    0-...0: (1 GPs behind) idle=dce/1/0x4000000000000000 softirq=36/42 fqs=6000
[ 66.589263]  (detected by 7, t=18002 jiffies, g=-1095, q=39)
[ 66.589267] Task dump for CPU 0:
[ 66.589271] task:rk-pcie       state:R  running task    stack: 0 pid:  156 ppid:    2 flags:0x0000000a
[ 66.589280] Call trace:

tchip_askquestions

新建文本文档.txt

58.76 KB, 下载次数: 1, 下载积分: 灯泡 -1 , 经验 -1

Debug日志

新建文本文档.txt

58.76 KB, 下载次数: 0, 下载积分: 灯泡 -1 , 经验 -1

作者: 板蓝根 时间: 2024-1-4 13:54
我们的底板有 wifi 模块

作者: 板蓝根 时间: 2024-1-4 13:54
如果是你自己的底板，或者把wifi去掉了，请自行修改 dts 关闭 pcie 测试一下

作者: forever5714 时间: 2024-1-8 12:16
在启动过程中，uboot没办法打断，所以就只能是使用固件升级的方式修改dts，但是wiki里面没有告诉怎么才能把生成的dts打包到单一的固件img里面，所以不知道该怎么做。

作者: forever5714 时间: 2024-1-8 12:19
另外，按照wiki里面的描述可以使用usb线缆单独的升级dtb文件，但是我用wiki里面说的RKDevTool工具根本看不到“Found One LOADER Device”，所以也没办法单独升级dtb文件（驱动里面可以看到Rockusb Device）。所以不知道该怎么方便的升级dtb呢？

欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)