Firefly开源社区

标题: ubuntu单系统的情况下烧写resource.img和boot.img到板子后，板子不能启动 [打印本页]

作者: chen 时间: 2015-6-4 10:45
标题: ubuntu单系统的情况下烧写resource.img和boot.img到板子后，板子不能启动
我板子上是ubuntu单系统那为什么我把编译生成的resource.img烧到板子上后，系统就启动不了了？

http://wiki.t-firefly.com/index.php/Firefly-RK3288/UART 我按照这个教程将resource.img和boot.img烧到板子上，板子启动不了？

求大神们，指教！！！！

作者: zhansb 时间: 2015-6-4 11:00
把log先附上来:)

作者: chen 时间: 2015-6-4 11:16

zhansb 发表于 2015-6-4 11:00
把log先附上来

DDR Version 1.00 20141007
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT

U-Boot 2014.10-RK3288-02 (Nov 26 2014 - 09:28:44)

CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 300000000HZ
ddr pll = 200000000HZ
codec pll = 594000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
failed to prepare fdt from boot!
power key: bank-0 pin-5
can't find dts node for ricoh619
pmic:act8846
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2014-11-26#2.17
empty serial no.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
Hit any key to stop autoboot:  0
failed to load fdt from boot!
kernel @ 0x02000000 (0x00608530)
ramdisk  @ 0x04bf0000 (0x00275b8f)
Secure Boot state: 0
bootrk: do_bootm_linux...
Loading Device Tree to 0480c000, end 04827184 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

一直重复打印这些log

作者: zhansb 时间: 2015-6-4 11:58
parameter有更新吗？

作者: chen 时间: 2015-6-4 12:00

zhansb 发表于 2015-6-4 11:58
parameter有更新吗？

没有。。。哪里有lubuntu单系统的parameter

作者: zhansb 时间: 2015-6-4 14:50
在SDK下面有个目录：/FFTools/parameter/
rk3288-3.10-uboot-android-data1G.parameter.txt rk3288-3.10-uboot-dual-data1G.parameter.txt rk3288-3.10-uboot-linux.parameter.txt

作者: chen 时间: 2015-6-4 15:21

zhansb 发表于 2015-6-4 14:50
在SDK下面有个目录：/FFTools/parameter/
rk3288-3.10-uboot-android-data1G.parameter.txt rk3288-3.10- ...

可以了，谢谢版主我用的是2014的lubuntu固件，要烧写parameter， 2015的ubuntu固件就可以不用烧写parameter

作者: zhansb 时间: 2015-6-4 16:56
在移植15.04？{:3_48:}

欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)