Firefly开源社区

标题: RK3399 烧录官方的img后再烧录自己的内核起不来 [打印本页]

作者: a13684942360 时间: 2018-6-19 10:10
标题: RK3399 烧录官方的img后再烧录自己的内核起不来
下载使用的是Firefly-rk3399_xubuntu16.04_EC20_20180614.img
烧录后发现起不来，然后在解包得到分区文件，烧录自己的内核，发现也是一样的现象，起不来，还请帮忙看看是哪里出了问题
DDR Version 1.07 20161103
In
Channel 0: DDR3, 666MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 666MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x32817281, stride = 0x9
OUT
Boot1: 2016-07-29, version: 1.05
CPUId = 0x0
ChipType = 10 1838
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
SdmmcInit=0 20
StorageInit ok = 62317
LoadTrustBL
No find bl30.bin
No find bl32.bin
theLoader 200000 77884
LoaderFlag2: 0x0
WARNING: plat_rockchip_comm_sram_init:code:ff8d9000, 67000, ef0
NOTICE:  BL31: v1.2(debug):b995f80
NOTICE:  BL31: Built : 16:53:56, Nov  7 2016
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: boot cpu mask: 0
INFO: Vesion: 2016.0.01
INFO: plat_rockchip_pmu_init(1211): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

U-Boot 2017.02-RK3399-06-ga7c7ca8 (Apr 25 2017 - 15:10:21)

CPU: rk3399
cpu version = 0
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 594000000HZ
            aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
            aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
            hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
cpll = 800000000HZ
dpll = 660000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Board:  Rockchip platform Board
Uboot as second level loader
DRAM:  Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
128 MiB
SdmmcInit = 0 20
storage init OK!
Using default environment

GetParam
Load FDT from resource image.
no key node
usb bc: can find node by path: /dwc-control-usb/usb_bc
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=58
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 594000000HZ
            aclk_periph_h = 148500000HZ, hclk_periph_h = 74250000HZ, pclk_periph_h = 37125000HZ
            aclk_periph_l0 = 99000000HZ, hclk_periph_l0 = 99000000HZ, pclk_periph_l0 = 49500000HZ
            hclk_periph_l1 = 99000000HZ, pclk_periph_l1 = 49500000HZ
cpll = 800000000HZ
dpll = 660000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Can't find dts node for fuel guage cw201x
can't find dts node for ec-battery
Can't find dts node for charger bq25700
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2017-04-25#1.05
empty serial no.
normal boot.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
no fuel gauge found
misc partition not found!
Hit any key to stop autoboot:  0
load fdt from resouce.
Secure Boot state: 0
kernel @ 0x00280000 (0x01103008)
ramdisk  @ 0x05bf0000 (0x00000000)
bootrk: do_bootm_linux...
Loading Device Tree to 0000000005600000, end 0000000005613645 ... OK
Add bank:0000000000200000, 000000007fe00000
WARNING: could not set reg FDT_ERR_BADOFFSET.

Starting kernel ...

<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.77 (harris@harris-System-Product-Name) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3) ) #3 SMP Fri Jun 15 18:38:1agemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2017-04-25_15:10:21
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] software IO TLB [mem 0x79a00000-0x7da00000] (64MB) vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000]    .init : 0xffffff8008ee0000 - 0xffffff8009000000 (  1152 KB)
[ 0.000000]    .text : 0xffffff8008080000 - 0xffffff8008ae0000 ( 10624 KB)
[ 0.000000]    .rodata : 0xffffff8008ae0000 - 0xffffff8008ee0000 (  4096 KB)
[ 0.000000]    .data : 0xffffff8009000000 - 0xffffff80091830nout to 64.
[ 0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @794g01[5] }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_count.ng 41201 entries in 161 pages
[ 0.113983] sched-energy: Sched-energy-costs installed from DT
[ 0.114001] CPU0: update cpu_capacity 401
[ 0.114064] ASID allocator initialised with 65536 entries
[ 0.117283] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.117714] Platform MSI: /interrupt-controller@fee00000/interrupt-contro7[ 0.120224] Detected VIPT I-cache on CPU3
[ 0.120245] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.120278] CPU3: using LPI pending table @0x0000000079710000
[ 0.120306] CPU3: update cpu_capacity 401
[ 0.120309] CPU3: Booted secondary processor [410fd034]
[ 0.120838] Detected PIPT I-cache on CPU4
[ 0.120866] CPU4: found redistributor 100 recacity 1024
[ 0.121581] CPU5: Booted secondary processor [410fd082]
[ 0.121671] Brought up 6 CPUs
[ 0.121754] SMP: Total of 6 processors activated.
[ 0.121764] CPU features: detected feature: GIC system register CPU interface
[ 0.121776] CPU: All CPU(s) started at EL2
[ 0.121824] alternatives: patching kernel code
[ 0.123278] devtmpfs: initialized
[ fg governor ladder
[ 0.146134] cpuidle: using governor menu
[ 0.146157] Registered FIQ tty driver
[ 0.146359] vdso: 2 pages (1 code @ ffffff8008ae6000, 1 data @ ffffff8009004000)
[ 0.146389] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.146551] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.228562] console [ttyFIQ0] enabled
[ [ 0.244290] iommu: Adding device ff650000.vpu_service to group 0
[ 0.244909] iommu: Adding device ff660000.rkvdec to group 1
[ 0.245488] iommu: Adding device ff8f0000.vop to group 2
[ 0.246044] iommu: Adding device ff900000.vop to group 3
[ 0.247752] SCSI subsystem initialized
[ 0.248423] usbcore: registered new interface driver usbfs
[ 0.248947] usbcore: registered new interface driver hub
[ 0.249500] usbcore: registered new device driver usb
[ 0.250049] media: Linux media interface: v0.10
[ 0.250494] Linux video capture interface: v2.00
[ 0.250938] pps_core: LinuxPPS API ver. 1 registered
[ 0.251378] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.252198] PTP clock support registered
[ 0.253439] Advanced Linux Sound Architecture Driver Initialized.
[ 0.254469] Bluetooth: Core ver 2.21
[ 0.254812] NET: Registered protocol family 31
[ 0.255214] Bluetooth: HCI device and connection manager initialized
[ 0.255777] Bluetooth: HCI socket layer initialized
[ 0.256210] Bluetooth: L2CAP socket layer initialized
[ 0.256685] Bluetooth: SCO socket layer initialized
[ 0.257725] rockchip-cpuinfo cpuinfo: Serial       : 5dfb38448dc2d689
[ 0.258707] clocksource: Switched to clocksource arch_sys_counter
[ 0.306798] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.307721] NET: Registered protocol family 2
[ 0.308540] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.309307] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.310272] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.310929] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.311517] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.312335] NET: Registered protocol family 1
[ 0.313024] RPC: Registered named UNIX socket transport module.
[ 0.313548] RPC: Registered udp transport module.
[ 0.313980] RPC: Registered tcp transport module.
[ 0.314396] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.315525] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.316355] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.320151] Initialise system trusted keyring
[ 0.328728] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.330995] NFS: Registering the id_resolver key type
[ 0.331466] Key type id_resolver registered
[ 0.331846] Key type id_legacy registered
[ 0.332218] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.333514] fuse init (API version 7.23)
[ 0.334361] SGI XFS with security attributes, no debug enabled
[ 0.340261] NET: Registered protocol family 38
[ 0.340671] Key type asymmetric registered
[ 0.341056] Asymmetric key parser 'x509' registered
[ 0.341643] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.342319] io scheduler noop registered
[ 0.342670] io scheduler deadline registered
[ 0.343187] io scheduler cfq registered (default)
[ 0.344875] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
[ 0.346779] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
[ 0.351718] backlight supply power not found, using dummy regulator
[ 0.352883] rk-vcodec ff650000.vpu_service: probe device
[ 0.353394] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc078d9a010
[ 0.354161] rk-vcodec ff650000.vpu_service: allocator is drm
[ 0.354726] rk-vcodec ff650000.vpu_service: checking hw id 0
[ 0.355670] rk-vcodec ff650000.vpu_service: init success
[ 0.356752] rk-vcodec ff660000.rkvdec: probe device
[ 0.357218] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc078d9a810
[ 0.357914] rk-vcodec ff660000.rkvdec: allocator is drm
[ 0.358425] rk-vcodec ff660000.rkvdec: checking hw id 6876
[ 0.359220] rk-vcodec ff660000.rkvdec: init success
[ 0.360954] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.361624] dma-pl330 ff6d0000.dma-controller:    DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.363878] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.364546] dma-pl330 ff6e0000.dma-controller:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.366310] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.368346] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[ 0.369750] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.371126] ff370000.serial: ttyS1 at MMIO 0xff370000 (irq = 38, base_baud = 1500000) is a 16550A
[ 0.372775] [drm:drm_core_init] Initialized drm 1.1.0 20060810
[ 0.376185] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008b81308)
[ 0.377117] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008b81308)
[ 0.378069] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 0.378659] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 0.379405] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 0.380835] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008b7c3a8)
[ 0.381551] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.382275] [drm:drm_vblank_init] No driver support for vblank timestamp query.
[ 0.383029] rockchip-drm display-subsystem: failed to parse loader memory
[ 0.383640] rockchip-drm display-subsystem: No connectors reported connected with modes
[ 0.384382] [drm:drm_fb_helper_single_fb_probe] Cannot find any crtc or sizes - going 1024x768
[ 0.396720] Console: switching to colour frame buffer device 128x48
[ 0.404459] rockchip-drm display-subsystem: fb0:  frame buffer device
[ 0.412072] mali ff9a0000.gpu: Failed to get regulator
[ 0.412527] mali ff9a0000.gpu: Power control initialization failed
[ 0.413165] platform ff9a0000.gpu: Driver mali requests probe deferral
[ 0.413986] Unable to detect cache hierarchy from DT for CPU 0
[ 0.415224] brd: module loaded
[ 0.420514] loop: module loaded
[ 0.421341] zram: Added device: zram0
[ 0.421936] lkdtm: No crash points registered, enable through debugfs
[ 0.423261] register spi return v = :0
[ 0.423615] tun: Universal TUN/TAP device driver, 1.6
[ 0.424083] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.425901] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.426523] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 0.427037] rk_gmac-dwmac fe300000.ethernet: RX delay(0x1b).
[ 0.427723] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.428260] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.433878] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 0.434329]  Ring mode enabled
[ 0.434605]  DMA HW capability register supported
[ 0.435016]  Normal descriptors
[ 0.435326]  RX Checksum Offload Engine supported (type 2)
[ 0.435817]  TX Checksum insertion supported
[ 0.436197]  Wake-Up On Lan supported
[ 0.436560]  Enable RX Mitigation via HW Watchdog Timer
[ 0.501407] libphy: stmmac: probed
[ 0.501729] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 0.502300] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 0.503735] PPP generic driver version 2.4.2
[ 0.504348] usbcore: registered new interface driver rndis_wlan
[ 0.505248] Rockchip WiFi SYS interface (V1.00) ...
[ 0.505772] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.506498] usbcore: registered new interface driver pegasus
[ 0.507108] usbcore: registered new interface driver rtl8150
[ 0.507647] usbcore: registered new interface driver r8152
[ 0.508195] usbcore: registered new interface driver asix
[ 0.508720] usbcore: registered new interface driver ax88179_178a
[ 0.509289] usbcore: registered new interface driver cdc_ether
[ 0.509873] usbcore: registered new interface driver dm9601
[ 0.510417] usbcore: registered new interface driver smsc75xx
[ 0.510987] usbcore: registered new interface driver smsc95x[ 0.511531] usbcore: registered new interface driver net1080
[ 0.512079] usbcore: registered new interface driver rndis_host
[ 0.512635] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 0.513379] usbcore: registered new interface driver cdc_ncm
[ 0.513929] usbcore: registered new interface driver qmi_wwan
[ 0.514472] usbcore: registered [ 0.521447] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd
[ 0.523052] platform usb@fe800000: Driver rockchip-dwc3 requests probe deferral
[ 0.529066] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[ 0.529891] platform usb@fe900000: Driver rockchip-dwc3 requests probe deferral
[ 0.531268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.531863] ehci-pci: EHCI PCI platform driver
[ 0.532309] ehci-platform: EHCI generic platform driver
[ 0.536450] ehci-platform fe380000.usb: EHCI Host Controller
[ 0.537100] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[ 0.537912] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
[ 0.543731] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.544430] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.545040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.545682] usb usb1: Product: EHCI Host Controller
[ 0.546122] usb usb1: Manufacturer: Linux 4.4.77 ehci_hcd
[ 0.546599] usb usb1: SerialNumber: fe380000.usb
[ 0.547452] hub 1-0:1.0: USB hub found
[ 0.547839] hub 1-0:1.0: 1 port detected
[ 0.551733] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.552374] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 0.553163] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
[ 0.559728] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.560410] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.561020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.561662] usb usb2: Product: EHCI Host Controller
[ 0.562100] usb usb2: Manufacturer: Linux 4.4.77 ehci_hcd
[ 0.562577] usb usb2: SerialNumber: fe3c0000.u[ 0.564615] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.565190] ohci-platform: OHCI generic platform driver
[ 0.565961] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.566717] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 0.567501] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
[ 0.622860] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.623458] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.624111] usb usb3: Product: Generic Platform OHCI controller
[ 0.624635] usb usb3: Manufacturer: Linux 4.4.77 ohci_hcd
[ 0.625118] usb usb3: SerialNumber: fe3a0000.usb
[ 0.625942] hub 3-0:1.0: USB hub found
[[ 0.628713] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
[ 0.683861] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.684458] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.685110] usb usb4: Product: Generic Platform OHCI controller
[ 0.685634] usb usb4: Manufacturer: Linux 4.4.77 ohci_hcd
[ 0.686118] usb usb4: SerialNumber: fe3e0000.usb
[ 0.686943] hub 4-0:1.0: USB hub found
[ 0.688469] usbcore: registered new interface driver cdc_acm
[ 0.688984] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.689737] usbcore: registered new interface driver cdc_wdm
[ 0.690280] usbcore: registered new interface driver uas
[ 0.690890] usbcore: registered new interface driver usb-storage
[ 0.691497] usbcore: registereistered for Keyspan 1 port adapter
[ 0.697587] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 0.698261] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 0.698953] usbcore: registered new interface driver option
[ 0.699461] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.700262] usbcore: registered nert registered for pl2303
[ 0.702459] usbcore: registered new interface driver qcserial
[ 0.703004] usbserial: USB Serial support registered for Qualcomm USB modem
[ 0.703673] usbcore: registered new interface driver sierra
[ 0.704202] usbserial: USB Serial support registered for Sierra USB modem
[ 0.705557] usbcore: registered new interface driver iforce
[ 0.hscreen
[ 0.708421] i2c /dev entries driver
[ 0.709958] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 0.710642] fan53555-reg: supplied by vcc5v0_sys
[ 0.712825] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 0.713474] fan53555-reg: supplied by vcc5v0_sys
[ 0.715762] rk808 0-001b: Pmic Chip id: 0x0
[ 0.719576] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.720192] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.720824] DCDC_REG1: supplied by vcc3v3_sys
[ 0.721933] DCDC_REG2: supplied by vcc3v3_sys
[ 0.722870] DCDC_REG3: supplied by vcc3v3_sys
[ 0.723504] DCDC_REG4: supplied by vcc3v3_sys
[ 0.724319] LDO_REG1: supplied by vcc3v3_sys
[ 0.725819] LDO_REG2: supplied by vcc3v3_sys
[ 0.727130] LDO_REG3: supplied by vcc3v3_sys
[ 0.728451] LDO_REG4: supplied by vcc3v3_sys
[ 0.729802] LDO_REG5: supplied by vcc3v3_sys
[ 0.731117] LDO_REG6: supplied by vcc3v3_sys
[ 0.732427] LDO_REG7: supplied by vcc3v3_sys
[ 0.733778] LDO_REG8: supplied by vcc3v3_sys
[ 0.735089] SWITCH_REG1: supplied by vcc3v3_sys
[ 0.735755] SWITCH_REG2: supplied by vcc3v3_sys
[ 0.739610] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 0.740633] rk808 0-001b: Can not read property pmic,hold-gpio
[ 0.741168] rk808 0-001b: Can not read property pmic,stby-gpio
[ 0.741713] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80093fc000
[ 0.742985] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80093fe000
[ 0.743727] rockchip-pinctrl pinctrl: pin gpio4-17 already requested by ff940000.hdmi; cannot claim for ff130000.i2c
[ 0.744656] rockchip-pinctrl pinctrl: pin-145 (ff130000.i2c) status -22
[ 0.745251] rockchip-pinctrl pinctrl: could not request pin 145 (gpio4-17) from group i2c3-xfer  on device rockchip-pinctrl
[ 0.746234] rk3x-i2c ff130000.i2c: Error applying setting, reverse things back
[ 0.747228] rk3x-i2c ff130000.i2c: Initialized RK3xxx I2C bus at ffffff8009442000
[ 0.748382] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009444000
[ 0.749951] IR NEC protocol handler initialized
[ 0.750360] IR RC5(x/sz) protocol handler initialized
[ 0.750824] IR RC6 protocol handler initialized
[ 0.751231] IR JVC protocol handler initialized
[ 0.751639] IR Sony protocol handler initialized
[ 0.752055] IR SANYO protocol handler initialized
[ 0.752475] IR Sharp protocol handler initialized
[ 0.752903] IR MCE Keyboard/mouse protocol handler initialized
[ 0.753417] IR XMP protocol handler initialized
[ 0.754244terface driver uvcvideo
[ 0.756340] USB Video Class driver (1.1.1)
[ 0.758928] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 0.760768] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 0.761686] Bluetooth: Virtual HCI driver ver 1.5
[ 0.762241] Bluetooth: HCI UART driver ver 2.3
[ 0.762636] Bluetooth: HCI UART protocol H4 registered
[ 0.763100] Bluetooth: HCI UART protocol LL registered
[ 0.763552] Bluetooth: HCI UART protocol ATH3K registered
[ 0.764101] usbcore: registered new interface driver bfusb
[ 0.764642] usbcore: registered new interface driver btusb
[ 0.765518] cpu cpu0: leakage=22
[ 0.765993] cpu cpu4: leakage=39
[ 0.769900] sdhci: Secure Digital Host Controller Interface driver
[ 0.770447] sdhci: Copyright(c) Pierre Ossman
[ 0.770857] Synopsys Designware Multimedia Card Interface Driver
[ 0.772232] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.772922] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 0.773524] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 0.774083] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 0.774958] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 0.775786] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[ 0.776582] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[ 0.777382] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[ 0.788778] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.799787] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 0.800562] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.802786] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 0.803321] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 0.829727] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 0.830864] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.832113] usbcore: registered new interface driver usbhid
[ 0.832612] usbhid: USB HID core driver
[ 0.834827] usbcore: registered new interface driver snd-usb-audio
[ 0.837222] platform es8316-sound: Driver asoc-simple-card requests probe deferral
[ 0.838014] platform hdmi-codec: Driver asoc-simple-card requests probe deferral
[ 0.840486] u32 classifier
[ 0.840775] Netfilter messages via NETLINK v0.30.
[ 0.841255] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 0.842114] ctnetlink v0.93: registering with nfnetlink.
[ 0.842753] ip_set: protocol 6
[ 0.843037] IPVS: Registered protocols ()
[ 0.843553] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
[ 0.844324] IPVS: Creating netns size=1592 id=0
[ 0.844783] IPVS: ipvs loaded.
[ 0.845393] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 0.846064] Initializing XFRM netlink socket
[ 0.847140] NET: Registered protocol family 10
[ 0.848434] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 0.849110] sit: IPv6 over IPv4 tunneling driver
[ 0.850058] NET: Registered protocol family 17
[ 0.850470] NET: Registered protocol family 15
[ 0.850906] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 0.852046] Bridge foth: RFCOMM ver 1.11
[ 0.853358] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 0.853896] Bluetooth: HIDP socket layer initialized
[ 0.854385] 8021q: 802.1Q VLAN Support v1.8
[ 0.854786] lib80211: common routines for IEEE802.11 drivers
[ 0.855328] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 0.856009] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 0.856487] [: enable wifi power control.
[ 0.857780] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 0.858468] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 149, flags = 0.
[ 0.859289] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 0.859779] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 0.860229] [BT_RFKILL]: Enter rfkill_rk_init
[mulation handler
[ 0.861984] Registered setend emulation handler
[ 0.862909] Loading compiled-in X.509 certificates
[ 0.864617] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 0.865773] I : [File] : drivers/gpu/arm/midgard_for_linux/backend/gpu/mali_kbase_devfreq.c; [Line] : 271; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[ 0.867262] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 0.868353] mali ff9a0000.gpu: Probed as mali0
[ 0.874989] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[ 0.875072] mmc1: MAN_BKOPS_EN bit is not set
[ 0.876404] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 5
[ 0.877372] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 0.878258] xhci-hcd xhci-hcd.6.auto: irq 226, io mem 0xfe800000
[ 0.879186] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.879831] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.880480] usb usb5: Product: xHCI Host Controller
[ 0.880950] usb usb5: Manufacturer: Linux 4.4.77 xhci-hcd
[ 0.881443] usb usb5: SerialNumber: xhci-hcd.6.auto
[ 0.883028] hub 5-0:1.0: USB hub found
[ 0.883437] hub 5-0:1.0: 1 port detected
[ 0.884662] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
[ 0.885522] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 6
[ 0.886264] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.886656] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 0.887019] mmcblk1: mmc1:0001 AJNB4R 14.6 GiB
[ 0.887208] mmcblk1boot0: mmc1:0001 AJNB4R partition 1 4.00 MiB
[ 0.887404] mmcblk1boot1: mmc1:0001 AJNB4R partition 2 4.00 MiB
[ 0.887580] mmcblk1rpmb: mmc1:0001 AJNB4R partition 3 4.00 MiB
[ 0.887893]    uboot: 0x000400000 -- 0x000800000 (4 MB)
[ 0.887897]    trust: 0x000800000 -- 0x000c00000 (4 MB)
[ 0.887900] resource: 0x000c00000 -- 0x001c00000 (16 MB)
[ 0.887903]    kernel: 0x001c00000 -- 0x003000000 (20 MB)
[ 0.887906]    backup: 0x003000000 -- 0x003400000 (4 MB)
[ 0.887909]    boot: 0x003400000 -- 0x3a3a00000 (14854 MB)
[ 0.892474]  mmcblk1: p1 p2 p3 p4 p5 p6
[ 0.892474] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.893427] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.894072] usb usb6: Product: xHCI Host Controller
[ 0.894509] usb usb6: Manufacturer: Linux 4.4.77 xhci-hcd
[ 0.894988] usb usb6: SerialNumber: xhci-hcd.6.auto
[ 0.895839] hub 6-0:1.0: USB hub found
[ 0.896190] hub 6-0:1.0: 1 port detected
[ 0.897566] xhci-hcd xhci-hcd.6.auto: remove, state 1
[ 0.898042] usb usb6: USB disconnect, device number 1
[ 0.922201] xhci-hcd xhci-hcd.6.auto: Host not halted after 16000 microseconds.
[ 0.922849] xhci-hcd xhci-hcd.6.auto: Host controller not halted, aborting reset.
[ 0.923533] xhci-hcd xhci-hcd.6.auto: USB bus 6 deregistered
[ 0.924430] xhci-hcd xhci-hcd.6.auto: remove, state 1
[ 0.924931] usb usb5: USB disconnect, device number 1
[ 0.925919] xhci-hcd xhci-hcd.6.auto: USB bus 5 deregistered
[ 0.931811] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 0.932417] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 5
[ 0.933222] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 0.934025] xhci-hcd xhci-hcd.7.auto: irq 227, io mem 0xfe900000
[ 0.934646] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.935255] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.935896] usb usb5: Product: xHCI Host Controller
[ 0.936332] usb usb5: Manufacturer: Linux 4.4.77 xhci-hcd
[ 0.936809] usb usb5: SerialNumber: xhci-hcd.7.auto
[ 0.937549] hub 5-0:1.0: USB hub found
[ 0.937906] hub 5-0:1.0: 1 port detected
[ 0.938457] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 0.939041] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 6
[ 0.939755] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.940518] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.941125] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.941764] usb usb6: Product: xHCI Host Controller
[ 0.942200] usb usb6: Manufacturer: Linux 4.4.77 xhci-hcd
[ 0.942671] usb usb6: SerialNumber: xhci-hcd.7.auto
[ 0.943404] hub 6-0:1.0: USB hub found
[ 0.943765] hub 6-0:1.0: 1 port detected
[ 0.987380] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[ 0.987984] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 0.988608] usb 2-1: Product: USB 2.0 Hub [MTT]
[ 0.989466] hub 2-1:1.0: USB hub found
[ 0.990005] hub 2-1:1.0: 4 ports detected
[ 1.066165] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff880000.i2s mapping ok
[ 1.066890] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1
[ 1.067580] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
[ 1.068409] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P
[ 1.069075] asoc-sim[ 1.076680] asoc-simple-card hdmi-codec: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 1.079614] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 1.081613] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:02 UTC (1358499002)
u 1.106853]

作者: a13684942360 时间: 2018-6-19 10:11
下面也没有任何的打印了

作者: zhuihai 时间: 2018-6-19 17:08
没看到出错信息

作者: a13684942360 时间: 2018-6-20 10:06

zhuihai 发表于 2018-6-19 17:08
没看到出错信息

最后卡在了[ OK ] Started D-Bus System Message Bus.这句。没有任何反应

作者: a13684942360 时间: 2018-6-20 10:09
DDR Version 1.12 20180518
In
Channel 0: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: DDR3, 800MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x32817281, stride = 0x9
OUT
Boot1: 2018-04-08, version: 1.12
CPUId = 0x0
ChipType = 0x10, 215
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
SdmmcInit=0 1
StorageInit ok = 67057
LoadTrustBL
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xa77a0
RunBL31 0x10000
NOTICE:  BL31: v1.3(debug):d98d16e
NOTICE:  BL31: Built : 15:03:07, May 10 2018
NOTICE:  BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1151): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-170-gc4654a6 #16 Wed May 30 08:54:30 UTC 2018 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9

U-Boot 2017.09-01617-g9c629953c6-dirty (Jun 13 2018 - 11:37:40 +0800)

Model: Firefly-RK3399 Board
DRAM:  2 GiB
Relocation Offset is: 7fd18000
PMIC:  RK808
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
*** Warning - bad CRC, using default environment

In: serial@ff1a0000
Out: serial@ff1a0000
Err: serial@ff1a0000
Model: Firefly-RK3399 Board
Card did not respond to voltage select!
mmc_init: -95, time 10
switch to partitions #0, OK
mmc0(part 0) is current device
boot mode: None
Net: eth0: ethernet@fe300000
Hit any key to stop autoboot:  0
ANDROID: reboot reason: "(none)"
FDT load addr 0x10f00000 size 257 KiB
Booting kernel at 0x207f800 with fdt at 31d3800...

## Booting Android Image at 0x0207f800 ...
Kernel load addr 0x02080000 size 17739 KiB
## Flattened Device Tree blob at 031d3800
Booting using the fdt blob at 0x31d3800
XIP Kernel Image ... OK
Loading Device Tree to 00000000081eb000, end 00000000081ff56f ... OK
Adding bank: star0200000, size=0x08200000
Adding bank: start=0x0a200000, size=0x75e00000

Starting kernel ...

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.132 (harris@harris-System-Product-Name) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #36 SMP Tue Jun 19 10:30:39 CST 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fefe000 s45800 r8192 d32024 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU featu00-0x7fdf4000] (0MB) mapped at [ffffffc07fdb4000-ffffffc07fdf3fff]
[ 0.000000] Memory: 2008616K/2064384K available (10814K kernel code, 1674K rwdata, 4128K rodata, 1088K init, 733K bss, 55768K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000]    modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000]    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] - 0xffffff8008b10000 ( 10816 KB)
[ 0.000000]    .rodata : 0xffffff8008b10000 - 0xffffff8008f20000 (  4160 KB)
[ 0.000000]    .data : 0xffffff8009030000 - 0xffffff80091d2808 (  1675 KB)
[ 0.000000]    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 (    8 GB maximum)
[ 0.000000]             0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)MB)
[ 0.000000]    memory  : 0xffffffc000200000 - 0xffffffc080000000 (  2046 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000]  Build-time adjustment of leaf fanout to 64.
[ 0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry fo[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @a300000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a290000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a2a0000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001924] Console: colour dummy device 80x25
[ 0.002355] Calibrating delay loop (skipped), vantries: 4096 (order: 3, 32768 bytes)
[ 0.005912] Initializing cgroup subsys devices
[ 0.006337] Initializing cgroup subsys freezer
[ 0.006782] ftrace: allocating 40285 entries in 158 pages
[ 0.106282] sched-energy: Sched-energy-costs installed from DT
[ 0.106835] CPU0: update cpu_capacity 401
[ 0.107272] ASID allocator initialised with 32768 entries
[ 0.110869] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.112117] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.114202] Detected VIPT I-cache on CPU1
[ 0.114235] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.114265] CPU1: using LPI pending table @0x0000000000310000
[ 0.114309] CPU1: update cpu_capacity 401
[ 0.114312] CPU1: Booted secondary processor [410fd034]
[ 0.114828] Detected VIPT I-cache on CPU2
[ 0.114850] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.114878] CPU2: using LPI pending table @0x0000000000340000
[ 0.114905] CPU2: update cpu_capacity 401
[ 0.114909] CPU2: Booted secondary processor [410fd034]
[ 0.115420] Detected VIPT I-cache on CPU3
[ 0.115441] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.115469] CPU3: using LPI pending table @0x0000000000390000
[ 0.115495] CPU3: update cpu_capacity 401
[ 0.115498] CPU3: Booted secondary processor [410fd034]
[ 0.116003] Detected PIPT I-cache on CPU4
[ 0.116029] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.116069] CPU4: using LPI pending table @0x00000000003c0000
[ pacity 1024
[ 0.116111] CPU4: Booted secondary processor [410fd082]
[ 0.116634] Detected PIPT I-cache on CPU5
[ 0.116653] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.116689] CPU5: using LPI pending table @0x00000000003f0000
[ 0.116716] CPU5: update cpu_capacity 1024
[ 0.116720] CPU5: Booted secondary processor [410fd082]
[ 0.116806] Br]pfs: initialized
[ 0.145787] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.146763] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.147822] pinctrl core: initialized pinctrl subsystem
[ 0.149073] NET: Registered protocol family 16
[ 0.153808] cpuidle: using governor ladder
[ 0.157817] cpuidle: using governor menu
[ 0.158213] Registered FIQ tty driver
[ 0.158863] vdso: 2 pages (1 code @ ffffff8008b16000, 1 data @ ffffff8009034000)
[ 0.159607] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.160433] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.182360] console [ttyFIQ0] enabled
[ 0.182360] console [ttyFIQ0] enabled
[ 0.183053] bootconsole [uart0] disabled
[ 0.183053] bootconsole [uart0] disabled
[ 0.183959] Registered fiq debugger ttyFIQ0
[ 0.209785] iommu: Adding device ff650000.vpu_service to group 0
[ 0.210384] iommu: Adding device ff660000.rkvdec to group 1
[ 0.210981] iommu: Adding device ff8f0000.vop to group 2
[ 0.211527] iommu: Adding device ff900000.vop to group 3
[ 0.213302] SCSI subsystem initialized
[ 0.213798] usbcore: registered new interface driver usbfs
[ 0.214333] usbcore: registered new interface driver hub
[ 0.214881] usbcore: registered new device driver usb
[ 0.215398] media: Linux media interface: v0.10
[ 0.215833] Linux video capture interface: v2.00
[ 0.216281] pps_core: LinuxPPS API ver. 1 registered
[ 0.216731] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.217547] PTP clock support registered
[ 0.218818] Advanced Linux Sound Architecture Driver Initialized.
[ 0.219826] Bluetooth: Core ver 2.21
[ 0.220181] NET: Registered protocol family 31
[ 0.220586] Bluetooth: HCI device and connection manager initialized
[ 0.221150] Bluetooth: HCI socket layer initialized
[ 0.221589] Bluetooth: L2CAP socket layer initialized
[ 0.222059] Bluetooth: SCO socket layer initialized
[ 0.223528] clocksource: Switched to clocksource arch_sys_counter
[ 0.271334] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.272254] NET: Registered protocol family 2
[ 0.273083] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.273830] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.274814] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.275472] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.276076] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.276889] NET: Registered protocol family 1
[ 0.277597] RPC: Registered named UNIX socket transport module.
[ 0.278121] RPC: Registered udp transport module.
[ 0.278549] RPC: Registered tcp transport module.
[ 0.278966] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.280501] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.281338] hw perfevents: enabled wit[ 0.285040] Initialise system trusted keyring
[ 0.293178] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.294463] NFS: Registering the id_resolver key type
[ 0.294955] Key type id_resolver registered
[ 0.295327] Key type id_legacy registered
[ 0.295756] fuse init (API version 7.23)
[ 0.296465] SGI XFS with security attributes, no debug enabled
[ 0.301715] NET: Registered protocol family 38
[ 0.302131] Key type asymmetric registered
[ 0.302507] Asymmetric key parser 'x509' registered
[ 0.303104] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.303785] io scheduler noop registered
[ 0.304139] io scheduler deadline registered
[ 0.304652] io scheduler cfq registered (default)
[ 0.306320] phy phy-ff770000.syscon:usb2-phy@e450.0: Failed to get VBUS supply regulator
[ 0.308245] phy phy-ff770000.syscon:usb2-phy@e460.2: Failed to get VBUS supply regulator
[ 0.313309] backlight supply power not found, using dummy regulator
[ 0.314323] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 0.315109] rk-vcodec ff650000.vpu_service: probe device
[ 0.315639] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc07d222010
[ 0.316393] rk-vcodec ff650000.vpu_service: allocator is drm
[ 0.316957] rk-vcodec ff650000.vpu_service: checking hw id 0
[ 0.317948] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 0.318583] rk-vcodec ff650000.vpu_service: init success
[ 0.319278] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 0.320177] rk-vcodec ff660000.rkvdec: probe device
[ 0.320653] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc07d222810
[ 0.321345] rk-vcodec ff660000.rkvdec: allocator is drm
[ 0.321870] rk-vcodec ff660000.rkvdec: checking hw id 6876
[ 0.322697] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 0.323269] rk-vcodec ff660000.rkvdec: init success
[ 0.325071] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.325753] dma-pl330 ff6d0000.dma-controller:    DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.328001] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.328682] dma-pl330 ff6e0000.dma-controller:    DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.330530] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 0.332738] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 34, base_baud = 1500000) is a 16550A
[ 0.334148] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.335843] [drm] Initialized drm 1.1.0 20060810
[ 0.339089] [drm] Rockchip DRM driver version: v1.0.1
[ 0.339853] rockchip-drm display-subsystem: defer getting devfreq
[ 0.340679] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 0.341487] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008bad768)
[ 0.342236] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 0.342973] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008bad768)
[ 0.343743] [drm:rockchip_dp_bind] *ERROR* failed to find panel
[ 0.344272] rockchip-drm display-subsystem: failed to bind ff970000.edp (ops 0xffffff8008ba62e0): -517
[ 0.345341] rockchip-drm display-subsystem: master bind failed: -517
[ 0.346985] ________ panel_simple_probe _______ start ____
[ 0.347660] ________ panel_simple_probe _______ over ____
[ 0.348642] mali ff9a0000.gpu: Failed to get regulator
[ 0.349096] mali ff9a0000.gpu: Power control initialization failed
[ 0.349952] Unable to detect cache hierarchy for CPU 0
[ 0.351137] brd: module loaded
[ 0.356400] loop: module loaded
[ 0.357230] zram: Added device: zram0
[ 0.357836] lkdtm: No crash points registered, enable through debugfs
[ 0.360083] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.360724] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 0.361226] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 0.361749] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 0.362444] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 0.363070] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.368620] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.369216] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 0.369678]  Ring mode enabled
[ 0.369954]  DMA HW capability register supported
[ 0.370358]  Normal descriptors
[ 0.370676]  RX Checksum Offload Engine supported (type 2)
[ 0.371162]  TX Checksum insertion supported
[ 0.371549]  Wake-Up On Lan supported
[ 0.371905]  Enable RX Mitigation via HW Watchdog Timer
[ 0.436822] libphy: stmmac: probed
[ 0.437126] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 0.437707] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 0.439287] usbcore: registered new interface driver rndis_wlan
[ 0.440099] Rockchip WiFi SYS interface (V1.00) ...
[ 0.440618] usbcore: registered new interface driver rtl8150
[ 0.441147] uectel_WCDMA&LTE_Linux&Android_GobiNet_Driver_V1.3.0
[ 0.445614] usbcore: registered new interface driver GobiNet
[ 0.452783] rockchip-dwc3 usb@fe800000: fail to get drvdata hcd
[ 0.676941] phy phy-ff770000.syscon:usb2-phy@e450.0: charger = USB_SDP_CHARGER
[ 0.683192] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[ 0.685447] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.686057] ehci-pci: EHCI PCI platform driver
[ 0.686503] ehci-platform: EHCI generic platform driver
[ 0.690611] ehci-platform fe380000.usb: EHCI Ho[ 0.698546] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 0.699244] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.699856] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.700499] usb usb1: Product: EHCI Host Controller
[ 0.700940] usb usb1: Manufacturer: Linux 4.4.132 ehci_hcd
[ 0.701428] usb usb1: SerialNumber: fe380000.usb
[ 0.702301] hub 1-0:1.0: USB hub found
[ 0.702675] hub 1-0:1.0: 1 port detected
[ 0.706900] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.707606] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[ 0.708440] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
[ 0.714563] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.715375] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.716000] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.716657] usb usb2: Product: EHCI Host Controller
[ 0.717099] usb usb2: Manufacturer: Linux 4.4.132 ehci_hcd
[ 0.717600] usb usb2: SerialNumber: fe3c0000.usb
[ 0.718684] hub 2-0:1.0: USB hub found
[ 0.719054] hub 2-0:1.0: 1 port detected
[ 0.720168] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.720747] ohci-platform: OHCI generic platform driver
[ 0.721709] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[ 0.722504] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[ 0.723322] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
[ 0.778712] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.779314] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.779970] usb usb3: Product: Generic Platform OHCI controller
[ 0.780496] usb usb3: Manufacturer: Linux 4.4.132 ohci_hcd
[ 0.780994] usb usb3: SerialNumber: fe3a0000.usb
[ 0.782002] hub 3-0:1.0: USB hub found
[ 0.782372] hub 3-0:1.0: 1 port detected
[ 0.783601] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.784432] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[ 0.785237] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
[ 0.840686] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.841286] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.841941] usb usb4: Product: Generic Platform OHCI controller
[ 0.842465] usb usb4: Manufacturer: Linux 4.4.132 ohci_hcd
[ 0.842963] usb usb4: SerialNumber: fe3e0000.usb
[ 0.843912] hub 4-0:1.0: USB hub found
[ 0.844280] hub 4-0:1.0: 1 port detected
[ 0.845935] usbcore: registered new interface driver cdc_acm
[ 0.846434] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.847209] usbcore: registered new interface driver cdc_wdm
[ 0.847778] usbcore: registered new interface driver uas
[ 0.848404] usbcore: registered new interface driver usb-storage
[ 0.849048] usbcore: registered new interface driver usbserial
[ 0.849632] usbcore: registered new interface driver usbserial_generic
[ 0.850243] usbserial: USB Serial support registered for generic
[ 0.850839] usbcore: registered new interface driver cp210x
[ 0.851369] usbserial: USB Serial support registered for cp210x
[ 0.852015] usbcore: registered new interface driver ftdi_sio
[ 0.852627] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 0.853535] usbcore: registered new interface driver keyspan
[ 0.854069] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 0.854798] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 0.855476] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 0.856169] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 0.856886] usbcore: registered new interface dr  0.860646] usbcore: registered new interface driver qcserial
[ 0.861185] usbserial: USB Serial support registered for Qualcomm USB modem
[ 0.861895] usbcore: registered new interface driver sierra
[ 0.862423] usbserial: USB Serial support registered for Sierra USB modem
[ 0.864319] usbcore: registered new interface driver usbtouchscreen
[ 0.865642] i2c /dev entr[ 0.867486] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 0.868245] fan53555-reg: supplied by vcc5v0_sys
[ 0.871201] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 0.871911] fan53555-reg: supplied by vcc5v0_sys
[ 0.875419] rk808 0-001b: Pmic Chip id: 0x0
[ 0.879643] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 0.880253] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 0.880940] DCDC_REG1: supplied by vcc5v0_sys
[ 0.882255] DCDC_REG2: supplied by vcc5v0_sys
[ 0.883398] DCDC_REG3: supplied by vcc5v0_sys
[ 0.884226] DCDC_REG4: supplied by vcc5v0_sys
[ 0.885231] LDO_REG1: supplied by vcc5v0_sys
[ 0.886884] LDO_REG2: supplied by vcc5v0_sys
[ 0.887484] vcca1v8_hdmi: Bringing 3000000uV into 1800000-1800000uV
[ 0.889103] LDO_REG3: supplied by vcc5v0_sys
[ 0.890663] LDO_REG4: supplied by vcc5v0_sys
[ 0.892179] LDO_REG5: supplied by vcc5v0_sys
[ 0.893734] LDO_REG6: supplied by vcc5v0_sys
[ 0.895262] LDO_REG7: supplied by vcc5v0_sys
[ 0.895855] vcca0v9_hdmi: Bringing 1800000uV into 900000-900000uV
[ 0.897471] LDO_REG8: supplied by vcc5v0_sys
[ 0.898086] vcc_3v3: Bringing 3000000uV into 3300000-3300000uV
[ 0.899697] SWITCH_REG1: supplied by vcc3v3_sys
[ 0.900558] SWITCH_REG2: supplied by vcc3v3_sys
[ 0.904704] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 0.905724] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094cc000
[ 0.907003] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094ce000
[ 0.908154] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094d0000
[ 0.909943] IR NEC protocol handler initialized
[ 0.910713] usbcore: registered new interface driver uvcvideo
[ 0.911224] USB Video Class driver (1.1.1)
[ 0.913948] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 0.914885] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[ 0.916117] Bluetooth: Virtual HCI driver ver 1.5
[ 0.916656] Bluetooth: HCI UART driver ver 2.3
[ 0.917051] Bluetooth: HCI UART protocol H4 registered
[ 0.917504] Bluetooth: HCI UART protocol LL registered
[ 0.917969] Bluetooth: HCI UART protocol ATH3K registered
[ 0.918505] usbcore: registered new interface driver bfusb
[ 0.919061] usbcore: registered new interface driver btusb
[ 0.919595] rtk_btusb: RTKBT_RELEASE_NAME: 20170109_TV_ANDROID_6.x
[ 0.920142] rtk_btusb: Realtek Bluetooth USB driver module init, version 4.1.2
[ 0.920791] rtk_btusb: Register usb char device interface for BT driver
[ 0.921578] usbcore: registered new interface driver rtk_btusb
[ 0.922493] cpu cpu0: leakage=22
[ 0.923922] cpu cpu4: leakage=39
[ 0.928967] sdhci: Secure Digital Host Controller Interface driver
[ 0.929526] sdhci: Copyright(c) Pierre Ossman
[ 0.929923] Synopsys Designware Multimedia Card Interface Driver
[ 0.931272] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 0.931962] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 0.932576] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 0.933127] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 0.934004] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 0.934825] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[ 0.935624] vcc_sd: unsupportable voltage range: 3300000-3000000uV
[ 0.936181] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 0.936851] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 0.947595] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 0.958610] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 0.959413] sdhci-pltfm: SDHCI platform and OF driver helper
[ 0.961652] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 0.962187] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 0.989605] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 0.991195] hidraw: raw HID events driver (C) Jiri Kosina
[ 0.992423] usbcore: registered new interface driver usbhid
[ 0.992946] usbhid: USB HID core driver
[ 0.994342] rockchip-dmc dmc: Cannot get the regulator "center"
[ 0.998098] usbcore: registered new interface driver snd-usb-audio
[ 1.003298] Initializing XFRM netlink socket
[ 1.004341] NET: Registered protocol family 10
[ 1.006041] NET: Registered protocol family 17
[ 1.006456] NET: Registered protocol family 15
[ 1.007157] Bluetooth: RFCOMM socket layer initialized
[ 1.007643] Bluetooth: RFCOMM ver 1.11
[ 1.007991] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.008532] Bluetooth: HIDP socket layer initialized
[ 1.009027] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.009680] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 1.010140] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = rtl8723bu
[ 1.010779] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 1.011409] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.012115] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 149, flags = 0.
[ 1.012945] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 1.013439] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.013906] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.014457] Key type dns_resolver registered
[ 1.016069] Registered cp15_barrier emulation handler
[ 1.016651] Registered setend emulation handler
[ 1.018245] Loading compiled-in X.509 certificates
[ 1.019368] [drm] Rockchip DRM driver version: v1.0.1
[ 1.020211] rockchip-drm display-subsystem: defer getting devfreq
[ 1.021082] rockchip-vop ff900000.vop: missing rockchip,grf property
[ 1.021893] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008bad768)
[ 1.022648] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[ 1.023364] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008bad768)
[ 1.024270] rockchip-dp ff970000.edp: failed to get vcc regulator: -19
[ 1.024855] rockchip-dp ff970000.edp: failed to get vccio regulator: -19
[ 1.025508] rockchip-dp ff970000.edp: no DP phy configured
[ 1.026069] _____ panel_simple_prepare ___
[ 1.026466] usb 2-1: new high-speed USB device number 2 using ehci-platform
[ 1.026942] rockchip-drm display-subsystem: bound ff970000.edp (ops 0xffffff8008ba62e0)
[ 1.027368] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 1.027392] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 1.027495] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 1.028994] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008ba4350)
[ 1.028999] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.029001] [drm] No driver support for vblank timestamp query.
[ 1.029200] rockchip-drm display-subsystem: failed to parse loader memory
[ 1.036144] mmc1: MAN_BKOPS_EN bit is not set
[ 1.048942] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 1.050532] mmcblk1: mmc1:0001 AJNB4R 14.6 GiB
[ 1.051427] mmcblk1boot0: mmc1:0001 AJNB4R partition 1 4.00 MiB
[ 1.052481] mmcblk1boot1: mmc1:0001 AJNB4R partition 2 4.00 MiB
[ 1.053373] mmcblk1rpmb: mmc1:0001 AJNB4R partition 3 4.00 MiB
[ 1.057131]  mmcblk1: p1 p2 p3 p4 p5 p6 p7 p8 p9
[ 1.149709] usb 2-1: New USB device found, idVendor=1a40, idProduct=0101
[ 1.150326] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.151012] usb 2-1: Product: USB 2.0 Hub [MTT]
[ 1.153310] hub 2-1:1.0: USB hub found
[ 1.154356] hub 2-1:1.0: 4 ports detected
[ 1.161271] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p65, type: 14
[ 1.161901] rockchip-vop ff8f0000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11
[ 1.165091] rockchip-dp ff970000.edp: Link Training Clock Recovery success
[ 1.166556] rockchip-dp ff970000.edp: Link Training success!
[ 1.215549] usb 3-1: new low-spee[ 1.416812] usb 3-1: New USB device found, idVendor=0000, idProduct=3825
[ 1.417410] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.418116] usb 3-1: Product:  USB OPTICAL MOUSE
[ 1.420261] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 1.421075] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 5
[ 1.422010] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.422881] xhci-hcd xhci-hcd.7.auto: irq 226, io mem 0xfe800000
[ 1.423703] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.424312] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.424985] usb usb5: Product: xHCI Host Controller
[ 1.425429] usb usb5: Manufacturer: Linux 4.4.132 xhci-hcd
[ 1.425435] input:  USB OPTICAL MOUSE as /devices/platform/fe3a0000.usb/usb3/3-1/3-1:1.0/0003:0000:3825.0001/input/input0
[ 1.426935] usb usb5: SerialNumber:
                                    [ 1.428263] hub 5-0:1.0: USB hub found
[ 1.428689] hub 5-0:1.0: 1 port detected
[ 1.429606] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 1.430345] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 6
[ 1.431178] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.432101] usb usb6: New USB device found, idVenusb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.433387] usb usb6: Product: xHCI Host Controller
[ 1.433847] usb usb6: Manufacturer: Linux 4.4.132 xhci-hcd
[ 1.434340] usb usb6: SerialNumber: xhci-hcd.7.auto
[ 1.435651] hub 6-0:1.0: USB hub found
[ 1.436042] hub 6-0:1.0: 1 port detected
[ 1.438630] xhci-hcd xhci-hcd.7.auto: remove, state 1
[ 1.439108] usb usb6: USB disconnect, device number 1
[ 1.468416] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds.
[ 1.469070] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset.
[ 1.469852] xhci-hcd xhci-hcd.7.auto: USB bus 6 deregistered
[ 1.470780] xhci-hcd xhci-hcd.7.auto: remove, state 1
[ 1.471301] usb usb5: USB disconnect, device number 1
[ 1.472568] xhci-hcd xhci-hcd.7.auto: USB bus 5 deregistered
[ 1.476989] hid-generic 0003:0000:3825.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-fe3a0000.usb-1/input0
[ 1.477635] rockchip-dwc3 usb@fe800000: USB peripheral connected
[ 1.480309] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 1.481669] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 5
[ 1.482662] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.483551] xhci-hcd xhci-hcd.8.auto: irq 227, io mem 0xfe900000
[ 1.484441] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.485100] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.485781] usb usb5: Product: xHCI Host Controller
[ 1.486253] usb usb5: Manufacturer: Linux 4.4.132 xhci-hcd
[ 1.486780] usb usb5: SerialNumber: xhci-hcd.8.auto
[ 1.488670] hub 5-0:1.0: USB hub found
[ 1.489083] hub 5-0:1.0: 1 port detected
[ 1.490177] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 1.491176] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 6
[ 1.492070] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.493062] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.493718] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.494375] usb usb6: Product: xHCI Host Controller
[ 1.494851] usb usb6: Manufacturer: Linux 4.4.132 xhci-hcd
[ 1.495351] usb usb6: SerialNumber: xhci-hcd.8.auto
[ 1.497656] hub 6-0:1.0: USB hub found
[ 1.498057] hub 6-0:1.0: 1 port detected
[ 1.564111] vendor storage:20160801 ret = 0
[ 1.626558] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff880000.i2s mapping ok
[ 1.627276] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1
[ 1.627998] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
[ 1.628838] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P
[ 1.629511] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P
[ 1.630794] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file
[ 1.631436] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file
[ 1.632147] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file
[ 1.632768] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file
[ 1.633380] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file
[ 1.634209] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file
[ 1.640502] asoc-simple-card hdmi-codec: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 1.644329]
[ 1.644485] =======================================================
[ 1.645112] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 1.645695] =======================================================
[ 1.646257] Realtek 8723BU USB WiFi driver (Powered by Rockchip) init.
[ 1.646864] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 1.647294] [BT_RFKILL]: rfkill_get_bt_power_state: rfkill-bt driver has not Successful initialized
[ 1.748822] [WLAN_RFKILL]: wifi turn on power. 149
[ 1.749488] usbcore: registered new interface driver rtl8723bu
[ 1.751230] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 1.754678] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:06 UTC (1358499006)
[ 1.791785] usb 5-1: new low-speed USB device number 2 using xhci-hcd
[ 1.797439] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-3f436d81badb', rk_ko_ver is '5', built at '10:30:17', on 'Jun 19 2018'.
[ 1.799862] Mali: Mali device driver loaded
[ 1.801379] ALSA device list:
[ 1.801667] #0: rockchip,es8316-codec
[ 1.802012] #1: HDMI-CODEC
[ 1.809461] EXT4-fs (mmcblk1p8): recovery complete
[ 1.809962] EXT4-fs (mmcblk1p8): mounted filesystem with ordered data mode. Opts: (null)
[ 1.810758] VFS: Mounted root (ext4 filesystem) on device 179:8.
[ 1.812233] devtmpfs: mounted
[ 1.813506] Freeing unused kernel memory: 1088K
[ 1.869856] systemd[1]: System time before build time, advancing clock.
[ 1.875729] systemd[1]: Failed to insert module 'autofs4': No such file or directory
[ 1.887487] random: systemd: uninitialized urandom read (16 bytes read, 35 bits of entropy available)
[ 1.890345] random: systemd: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[ 1.891592] usb 2-1.4: new high-speed USB device number 3 using ehci-platform
[ 1.892999] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 1.895850] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 16.04.2 LTS!

[ 1.900350] systemd[1]: Set hostname to <firefly>.
[ 1.911143] usb 5-1: New USB device found, idVendor=1c4f, idProduct=0002
[ 1.911795] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.912434] usb 5-1: Product: USB Keyboard
[ 1.912869] usb 5-1: Manufacturer: SIGMACHIP
[ 1.914650] usb 5-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.915455] usb 5-1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.926683] random: systemd: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.928354] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.929632] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.930612] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.930662] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.8.auto/usb5/5-1/5-1:1.0/0003:1C4F:0002.0002/input/input2
[ 1.933287] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 37 bits of entropy available)
[ 1.938319] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 1.941708] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 38 bits of entropy available)
[ 1.946389] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 39 bits of entropy available)
[ 1.977752] usb 2-1.4: New USB device found, idVendor=0bda, idProduct=b720
[ 1.978378] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.979117] usb 2-1.4: Product: 802.11n WLAN Adapter
[ 1.979608] usb 2-1.4: Manufacturer: Realtek
[ 1.979998] usb 2-1.4: SerialNumber: 00e04c000001
[ 1.983143] hid-generic 0003:1C4F:0002.0002: input,hidraw1: USB HID v1.10 Keyboard [SIGMACHIP USB Keyboard] on usb-xhci-hcd.8.auto-1/input0
[ 1.991184] input: SIGMACHIP USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.8.auto/usb5/5-1/5-1:1.1/0003:1C4F:0002.0003/input/input3
[ 1.994717] Bluetooth: hci0: rtl: examining hci_ver=06 hci_rev=000b lmp_ver=06 lmp_subver=8723
[ 1.995492] Bluetooth: hci0: rtl: loading rtl_bt/rtl8723b_fw.bin
[ 1.996690] bluetooth hci0: Direct firmware load for rtl_bt/rtl8723b_fw.bin failed with error -2
[ 1.997474] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin
[ 2.044675] hid-generic 0003:1C4F:0002.0003: input,hidraw2: USB HID v1.10 Device [SIGMACHIP USB Keyboard] on usb-xhci-hcd.8.auto-1/input1
[ 2.167224]
[ 2.167372] 29 81 03 7C 01 08 21 00 40 07 05 35 10 00 00 00
[ 2.167948] 36 36 36 36 35 35 37 37 37 37 36 00 FF FF FF FF
[ 2.168504] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 2.169073] FF FF FF FF FF FF FF FF FF FF 36 36 36 36 35 35
[ 2.169638] 37 37 37 37 36 00 FF FF FF FF FF FF FF FF FF FF
[ 2.170193] FF FF FF FF FF FF FF FF FF FF FFF FF FF FF FF FF FF FF FF FF FF FF
[ 2.184863] FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
[ 2.220294] systemd[1]: Reached target Remote File Systems (Pre).
[  OK  ] Reached target Remote File Systems (Pre).
[ 2.221478] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
[ 2.222649] systemd[1]: Listening on udev Control Socket.
[  OK  ] Listening on udev [ 2.240396] systemd[1]: Reached target Remote File Systems.
[  OK  ] Reached target Remote File Systems.
[ 2.241159] systemd[1]: Reached target Slices.
[  OK  ] Reached target Slices.
[ 2.242026] systemd[1]: Reached target Swap.
[  OK  ] Reached target Swap.
[ 2.242967] systemd[1]: Listening on Journal Socket.
[  OK  ] Listening on Journal Socket.
[ 2.248217] systemd[1]: Starting Load Kernel Modules...
      Starting Load Kernel Modules...
[ 2.254143] systemd[1]: Mounting Debug File System...
      Mounting Debug File System...
[ 2.258677] systemd[1]: Starting Journal Service...
      Starting Journal Service...
[ 2.265946] systemd[1]: Starting Set console keymap...
      Starting Set console keymap...
[ 2.271441] systemd[1]: Starting Remount Root and Kernel File Systems...
      Starting Remount Root and Kernel File Systems...
[ 2.276370] systemd[1]: Starting Create Static Device Nodes in /dev...
      Starting Create Static Device Nodes in /dev...
[ 2.282464] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
[ 2.283999] systemd[1]: Failed to start Load Kernel Modules.
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[ 2.285230] systemd[1]: systemd-modules-load.service: Unit entered failed state.
[ 2.289602] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
[ 2.291016] systemd[1]: Started Remount Root and Kernel File Systems.
[  OK  ] Started Remount Root and Kernel File Systems.
[ 2.355948] systemd[1]: Mounted Debug File System.
[  OK  ] Mounted Debug File System.
[ 2.357924] systemd[1]: Started Create Static Device Nodes in /dev.
[  OK  ] Started Create Static Device Nodes in /dev.
[ 2.378658] systemd[1]: Started Set console keymap.
[  OK  ] Started Set console keymap.
[ 2.402083] systemd[1]: Started Journal Service.
[  OK  ] Started Journal Service.
      Starting udev Kernel Device Manager...
      Starting udev Coldplug all Devices...
      Starting Flush Journal to Persistent Storage...
      Starting Load/Save Random Seed...
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Reached target Local File Systems.
      Starting LSB: AppArmor initialization...
      Starting Tell Plymouth To Write Out Runtime Data...
      Starting Set console font and keymap...
      Mounting FUSE Control File System...
      Starting Apply Kernel Variables...
      Mounting Configuration File System...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Mounted Configuration File System.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started udev Kernel Device Manager.
[  OK  ] Started Tell Plymouth To Write Out Runtime Data.
[  OK  ] Started Apply Kernel Variables.
[  OK  ] Started Flush Journal to Persistent Storage.
[  OK  ] Started Set console font and keymap.
[  OK  ] Created slice system-getty.slice.
      Starting Create Volatile Files and Directories...
[  OK  ] Started LSB: AppArmor initialization.
      Starting Raise network interfaces...
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started Create Volatile Files and Directories.
[  OK  ] Reached target Sound Card.
[  OK  ] Created slice system-systemd\x2dbacklight.slice.
      Starting Load/Save Screen Backlight...htness of backlight:backlight...
      Starting Network Time Synchronization...
      Starting Update UTMP about System Boot/Shutdown...
[  OK  ] Started Dispatch Password Requests to Console Directory Watch.
[  OK  ] Reached target Paths.
[  OK  ] Started Load/Save Screen Backlight Brightness of backlight:backlight.
[  OK  ] Started Update UTMP about System Boot/Shutdown.
[  OK  ] Started Network Time Synchronization.
[  OK  ] Reached target System Initialization.
[  OK  ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
[  OK  ] Listening on D-Bus System Message Bus Socket.
[  OK  ] Started Daily Cleanup of Temporary Directories.
      Starting Socket activation for snappy daemon.
[  OK  ] Reached target System Time Synchronized.
[  OK  ] Started Daily apt activities.
[  OK  ] Started Timer to automatically refresh installed snaps.
[  OK  ] Reached target Timers.
[  OK  ] Listening on Socket activation for snappy daemon.
[  OK  ] Reached target Sockets.
[  OK  ] Reached target Basic System.
      Starting LSB: automatic crash report generation...
      Starting Resize root filesystem to fit available disk space...
      Starting Login Service...
[  OK  ] Started Regular background program processing daemon.
[ 2.888039] Bluetooth: hci0: Failed to load rtl_bt/rtl8723b_fw.bin
      Starting Permit User Sessions...
      Starting System Logging Service...
      Starting Restore /etc/resolv.conf i...re the ppp link was shut down...
      Starting LSB: Set the CPU Frequency Scaling governor to "ondemand"...
[  OK  ] Started CUPS Scheduler.
      Starting Save/Restore Sound Card State...
      Starting Modem Manager...
[  OK  ] Started D-Bus System Message Bus.
最后卡在了[  OK  ] Started D-Bus System Message Bus.这句。没有任何反应

作者: wjk 时间: 2018-8-7 16:04

a13684942360 发表于 2018-6-20 10:09
DDR Version 1.12 20180518
In
Channel 0: DDR3, 800MHz

我遇到了一个跟你差不多的现象，不过我不是卡在你这个地方，，

作者: wjk 时间: 2018-8-7 16:06

a13684942360 发表于 2018-6-20 10:06
最后卡在了[ OK ] Started D-Bus System Message Bus.这句。没有任何反应

你用的内核是什么地方下载的？？

作者: wjk 时间: 2018-8-7 17:00

zhuihai 发表于 2018-6-19 17:08
没看到出错信息

这样的是吧，我试了试你用的哪个官方给的版本，一样的现象

2018-8-7 16-59-05.png (22.82 KB, 下载次数: 210)

作者: wjk 时间: 2018-8-7 17:59
哥们，这个问题我搞定了
看我这个贴子
http://dev.t-firefly.com/thread-14229-1-1.html

欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)