Firefly开源社区
标题:
firefly-RK3399烧录官方Ubuntu镜像和kernel编译出的镜像会一直卡死在kernel阶段
[打印本页]
作者:
soar9999
时间:
2018-7-16 14:10
标题:
firefly-RK3399烧录官方Ubuntu镜像和kernel编译出的镜像会一直卡死在kernel阶段
请问各位有遇到过这个问题,开机一直卡在下面log:
[ 2.194056] [WLAN_RFKILL]: wifi turn on power. -1
[ 2.199348] =======================================================
[ 2.199928] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 2.200492] =======================================================
[ 2.201073] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver 2.20.WFD) init.
[ 2.201776] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 2.202198] [WLAN_RFKILL]: wifi turn on power. -1
[ 2.202617] RTL871X: module init start
[ 2.202771] random: nonblocking pool is initialized
[ 2.203412] RTL871X: rtl8188eu v4.3.24_16705.20160509
[ 2.204130] usbcore: registered new interface driver rtl8188eu
[ 2.204650] RTL871X: module init ret=0
[ 2.206316] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 2.206711] input: gpio-keys as /devices/platform/gpio-keys/input/input1
[ 2.209241] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.210913] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 08:50:18 UTC (1358499018)
[ 2.211631] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 2.215089] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
ú 2.245561]
[ 2.281830] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
[ 2.310574] dwmmc_rockchip fe310000.dwmmc: All phases work, using default phase 0.
[ 2.321241] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[ 2.321818] mmc2: new ultra high speed SDR104 SDIO card at address 0001
查找了好几天都没有解决,各位知道是什么问题吗?恳求指导,谢谢!
作者:
hnjztyx
时间:
2018-12-7 16:52
问题有解决吗?
作者:
落落落落落落落
时间:
2019-1-26 15:40
同问!!
作者:
linfans
时间:
2022-4-29 14:55
解决问题了吗?
欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)
Powered by Discuz! X3.1