Firefly开源社区

标题: 更新10寸UBUNTU内核，系统重启！ [打印本页]

作者: jingjin221 时间: 2015-9-9 16:30
标题: 更新10寸UBUNTU内核，系统重启！
在10寸LVDS接口屏幕下更新UBUNTUkernel.
用firefly-rk3288_pad_android4.4_git_20141218.tar.gz PAD版本的源码，用  firefly-rk3288-linux_defconfig这个内核配置编译出来的 kernel.img 和 resource.img，再打包成boot.img。
我先已经烧写了你的完整固件，可以正常跑。
我把我编译的boot.img烧写进去，内核刚开始跑，就停了，就不断的重启！下面是打印信息！

DDR Version 1.00 20141007
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT

U-Boot 2014.10-RK3288-01 (Nov 27 2014 - 16:44:27)

CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
failed to prepare fdt from boot!
power key: bank-0 pin-5
pmic:act8846
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2014-11-27#2.19
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
Hit any key to stop autoboot:  0
failed to load fdt from boot!
kernel @ 0x02000000 (0x0062d51c)
ramdisk  @ 0x04bf0000 (0x00275aeb)
Secure Boot state: 0
bootrk: do_bootm_linux...
Loading Device Tree to 0480d000, end 0482aad2 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0x500
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.10.0 (root@ubuntu) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #3 SMP PREEMPT Wed Sep 9 00:54:49 PDT 2015
[ 0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[ 0.000000] rockchip_ion_reserve
[ 0.000000] ion heap(cma): base(40000000) size(28000000) align(0)
[ 0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[ 0.000000] cma: CMA: reserved 640 MiB at 40000000
[ 0.000000] ion_reserve: cma reserved base 40000000 size 671088640
[ 0.000000] cma: CMA: reserved 16 MiB at 2e800000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] PERCPU: Embedded 9 pages/cpu @c1da9000 s14016 r8192 d14656 u36864
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[ 0.000000] Kernel command line: console=tty0 console=ttyS2 earlyprintk root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init  mtdparts=rk29xxnand:0x00008000@0x00002000(resource),0x00008000@0x0000A000(boot),0x00002000@0x00012000(misc),0x0001a000@0x00014000(backup),-@0x0002e000(linuxroot) storagemedia=emmc loader.timestamp=2014-11-27_16:44:27
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2048MB = 2048MB total
[ 0.000000] Memory: 1391428k/1391428k available, 705724k reserved, 663552K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000]    vector  : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000]    fixmap  : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000]    vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000]    lowmem  : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000]    pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000]    modules : 0xbf000000 - 0xbfe00000 (  14 MB)
[ 0.000000]    .text : 0xc0008000 - 0xc0ad7490 (11070 kB)
[ 0.000000]    .init : 0xc0ad8000 - 0xc0b6c6c0 ( 594 kB)
[ 0.000000]    .data : 0xc0b6e000 - 0xc0c4c178 ( 889 kB)
[ 0.000000]       .bss : 0xc0c4c178 - 0xc0d6bc44 (1151 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[ 0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[ 0.000000] rkclk_init_clks: cnt_parent = 7
[ 0.000000] rkclk_init_clks: cnt_rate = 31
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[ 0.000000] process version: 2
[ 0.000000] channel:0, lkg:14
[ 0.000000] target-temp:80
[ 0.000000] channel:2, lkg:0
[ 0.000000] target-temp:80
[ 0.000000] channel:0, lkg:14
[ 0.000000] target-temp:80
[ 0.000000] channel:1, lkg:11

作者: jingjin221 时间: 2015-9-9 16:35
补充一下，我先烧写的是PAD版本的UBUNTU完整固件，可以正常使用的1

作者: jingjin221 时间: 2015-9-9 17:53

jingjin221 发表于 2015-9-9 16:35
补充一下，我先烧写的是PAD版本的UBUNTU完整固件，可以正常使用的1

上面问题描述的有个错误，是把kernel.img和 initr.img打包成boot.img。

欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)