Firefly开源社区
标题:
rk3288 双LVDS显示问题
[打印本页]
作者:
cl05220726
时间:
2016-5-20 15:37
标题:
rk3288 双LVDS显示问题
自行编译了5.1的固件,调试双LVDS输出,启动时显示了一下firefly的logo,接下来就没显示了。但HDMI显示是正常的,进入了Android的操作界面。有谁遇到过这种问题啊?该怎么解决?自行编译的固件,很多奇怪的问题....
作者:
victor1215
时间:
2016-5-20 17:29
我用做 Reload 板調LCDC0 LVDS+LCDC1 HDMI 時有發生過呀!
作者:
cl05220726
时间:
2016-5-20 18:18
victor1215 发表于 2016-5-20 17:29
我用做 Reload 板調LCDC0 LVDS+LCDC1 HDMI 時有發生過呀!
解决没有哇?急死了,各种参数各种调都没用啊:Q
作者:
victor1215
时间:
2016-5-27 15:40
rgb2hdmi {
compatible = "firefly,rgb2hdmi";
power-gpio = <&gpio7 GPIO_A2 GPIO_ACTIVE_HIGH>;
lcdc-gpio = <&gpio7 GPIO_A3 GPIO_ACTIVE_HIGH>;
hpd-gpio = <&gpio4 GPIO_D3 GPIO_ACTIVE_HIGH>;
rockchip,source = <0>; //0: LCDC0; 1: LCDC1
rockchip,prop = <PRMRY>;//<PRMRY>;//<EXTEND>
status = "disabled";
};
vga_ddc@50 {
compatible = "firefly,vga_ddc";
reg = <0x50>;
rockchip,source = <0>; //0: LCDC0; 1: LCDC1
rockchip,prop = <PRMRY>;//<EXTEND>
status = "disabled";
};
&fb {
rockchip,disp-mode = <DUAL>;
rockchip,uboot-logo-on = <0>;
//rockchip,disp-policy = <DISPLAY_POLICY_BOX>;
};
&disp_timings {
native-mode = <&timing1>;
};
&rk_screen {
display-timings = <&disp_timings>;
};
/*lcdc0 as PRMRY(HDMI)*/
&lcdc0 {
status = "okay";
rockchip,iommu-enabled = <1>;
//rockchip,mirror = <NO_MIRROR>;
rockchip,cabc_mode = <0>;
rockchip,prop = <PRMRY>;
power_ctr: power_ctr {
rockchip,debug = <0>;
lcd_en:lcd_en {
rockchip,power_type = <GPIO>;
gpios = <&gpio7 GPIO_A3 GPIO_ACTIVE_HIGH>;
rockchip,delay = <10>;
};
lcd_cs:lcd_cs {
rockchip,power_type = <GPIO>;
gpios = <&gpio7 GPIO_A4 GPIO_ACTIVE_HIGH>;
rockchip,delay = <10>;
};
/*lcd_rst:lcd_rst {
rockchip,power_type = <GPIO>;
gpios = <&gpio3 GPIO_D6 GPIO_ACTIVE_HIGH>;
rockchip,delay = <5>;
};*/
};
};
&lcdc1 {
status = "okay";
rockchip,iommu-enabled = <1>;
rockchip,prop = <EXTEND>;
};
&hdmi {
status = "okay";
rockchip,cec_enable = <0>;
rockchip,hdcp_enable = <0>;
rockchip,hdmi_audio_source = <1>;
};
欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/)
Powered by Discuz! X3.1