Firefly开源社区

标题: PL2303芯片在安卓系统上识别成GSM modem [打印本页]

作者: feng3327    时间: 2015-3-21 10:59
标题: PL2303芯片在安卓系统上识别成GSM modem
把usb gps设备插入到usb中,用adb shell dmesg,打印成了:
<4>[  253.989862] option_instat_callback,recieve -71 error more than 10 times,so
reset usb
<6>[  253.990330] option1 ttyUSB0: GSM modem (1-port) converter now disconnected
from ttyUSB0
<6>[  253.990524] option 2-1.4:1.0: device disconnected
<6>[  254.011240] usb 2-1.4: USB disconnect, device number 5
<6>[  260.469643] usb 2-1.4: new full speed USB device number 6 using usb20_host

<6>[  260.570803] usb 2-1.4: New USB device found, idVendor=067b, idProduct=2303

<6>[  260.570909] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNum
ber=0
<6>[  260.571013] usb 2-1.4: Product: USB-Serial Controller D
<6>[  260.571082] usb 2-1.4: Manufacturer: Prolific Technology Inc.
<6>[  260.574447] option 2-1.4:1.0: GSM modem (1-port) converter detected
<6>[  260.576154] usb 2-1.4: GSM modem (1-port) converter now attached to ttyUSB0

这啥情况
作者: zhansb    时间: 2015-3-21 11:29
用默认版 SDK?2303的config有打开了吗
作者: feng3327    时间: 2015-3-24 09:55
已解决,内核配置把PL2303打开,然后把option.c里面的关于2303的VID和PID的代码注释掉即可




欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/) Powered by Discuz! X3.1