Firefly开源社区

标题: 更新固件后,烧录自己编译kernel,板子无限重启，”Rockusb Device”无法识别。 [打印本页]
作者: 休息的风    时间: 2019-7-2 11:03
标题: 更新固件后,烧录自己编译kernel,板子无限重启，”Rockusb Device”无法识别。
1.”Rockusb Device”无法识别是电脑驱动问题，还是板子问题？
2.此时能不能强行进入maskrom模式？

板子无限重启，打印如下：
  1. DDR Version 1.19 20190305
  2. In
  3. Channel 0: DDR3, 800MHz
  4. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  5. Channel 1: DDR3, 800MHz
  6. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  7. 256B stride
  8. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  9. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  10. pmugrf_os_reg[2] = 0x3AA17AA1, stride = 0xD
  11. OUT
  12. Boot1: 2019-03-14, version: 1.19
  13. CPUId = 0x0
  14. ChipType = 0x10, 231
  15. SdmmcInit=2 0
  16. BootCapSize=100000
  17. UserCapSize=119276MB
  18. FwPartOffset=2000 , 100000
  19. mmc0:cmd8,20
  20. mmc0:cmd5,20
  21. mmc0:cmd55,20
  22. mmc0:cmd1,20
  23. mmc0:cmd8,20
  24. mmc0:cmd5,20
  25. mmc0:cmd55,20
  26. mmc0:cmd1,20
  27. mmc0:cmd8,20
  28. mmc0:cmd5,20
  29. mmc0:cmd55,20
  30. mmc0:cmd1,20
  31. SdmmcInit=0 1
  32. StorageInit ok = 67347
  33. SecureMode = 0
  34. SecureInit read PBA: 0x4
  35. SecureInit read PBA: 0x404
  36. SecureInit read PBA: 0x804
  37. SecureInit read PBA: 0xc04
  38. SecureInit read PBA: 0x1004
  39. SecureInit read PBA: 0x1404
  40. SecureInit read PBA: 0x1804
  41. SecureInit read PBA: 0x1c04
  42. SecureInit ret = 0, SecureMode = 0
  43. atags_set_bootdev: ret:(0)
  44. GPT part:  0, name:            uboot, start:0x4000, size:0x2000
  45. GPT part:  1, name:            trust, start:0x6000, size:0x2000
  46. GPT part:  2, name:             boot, start:0xa000, size:0x10000
  47. GPT part:  3, name:           backup, start:0x2a000, size:0x10000
  48. GPT part:  4, name:           rootfs, start:0x5a000, size:0xe89bfdf
  49. find part:uboot OK. first_lba:0x4000.
  50. find part:trust OK. first_lba:0x6000.
  51. LoadTrust Addr:0x6000
  52. No find bl30.bin
  53. Load uboot, ReadLba = 4000
  54. Load OK, addr=0x200000, size=0xd6fac
  55. RunBL31 0x10000
  56. NOTICE:  BL31: v1.3(debug):370ab80
  57. NOTICE:  BL31: Built : 09:23:41, Mar  4 2019
  58. NOTICE:  BL31: Rockchip release version: v1.1
  59. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  60. INFO:    Using opteed sec cpu_context!
  61. INFO:    boot cpu mask: 0
  62. INFO:    plat_rockchip_pmu_init(1181): pd status 3e
  63. INFO:    BL31: Initializing runtime services
  64. INFO:    BL31: Initializing BL32
  65. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec  7 06:11:20 UTC 2018 aarch64)

  67. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

  69. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
  70. INFO:    BL31: Preparing for EL3 exit to normal world
  71. INFO:    Entry point address = 0x200000
  72. INFO:    SPSR = 0x3c9


  75. U-Boot 2017.09-02577-g0b1f585 (Apr 03 2019 - 10:12:37 +0800)

  77. Model: Firefly-RK3399 Board
  78. PreSerial: 2
  79. DRAM:  3.8 GiB
  80. Relocation Offset is: f5bee000
  81. Sysmem: init
  82. Using default environment

  84. dwmmc@fe320000: 1, sdhci@fe330000: 0
  85. Bootdev(atags): mmc 0
  86. PartType: EFI
  87. get part misc fail -1
  88. boot mode: None
  89. bad resource image magic:
  90. DTB: rk-kernel.dtb
  91. invalid entry tag
  92. invalid entry tag
  93. invalid entry tag
  94. invalid entry tag
  95. invalid entry tag
  96. invalid entry tag
  97. invalid entry tag
  98. invalid entry tag
  99. "Synchronous Abort" handler, esr 0x96000010
  100. * Relocate offset = 00000000f5bee000
  101. * ELR(PC)    =   000000000028407c
  102. * LR         =   0000000000203a8c
  103. * SP         =   00000000e9de2020

  105. * ESR_EL2    =   0000000096000010
  106.         EC[31:26] == 100101, Exception from a Data abort, from current exception level
  107.         IL[25] == 1, 32-bit instruction trapped

  109. * DAIF       =   00000000000003c0
  110.         D[9] == 1, DBG masked
  111.         A[8] == 1, ABORT masked
  112.         I[7] == 1, IRQ masked
  113.         F[6] == 1, FIQ masked

  115. * SPSR_EL2   =   0000000020000349
  116.         D[9] == 1, DBG masked
  117.         A[8] == 1, ABORT masked
  118.         I[7] == 0, IRQ not masked
  119.         F[6] == 1, FIQ masked
  120.         M[4] == 0, Exception taken from AArch64
  121.         M[3:0] == 1001, EL2h

  123. * SCTLR_EL2  =   0000000030c51835
  124.         I[12] == 1, Icaches enabled
  125.         C[2] == 1, Dcache enabled
  126.         M[0] == 1, MMU enabled

  128. * HCR_EL2    =   000000000800003a
  129. * VBAR_EL2   =   00000000f5dee800
  130. * TTBR0_EL2  =   00000000f7ff0000

  132. x0 : 000000000841e600 x1 : 00000000f5e8fb8e
  133. x2 : 0000000000000004 x3 : 00000000ff1a0000
  134. x4 : 0000000000000000 x5 : 0000000000000004
  135. x6 : 000000000841e600 x7 : 00000000f5ea7f40
  136. x8 : 00000000e9de20c0 x9 : 0000000000000008
  137. x10: 00000000ffffffd8 x11: 0000000000000006
  138. x12: 000000000001869f x13: 0000000000000200
  139. x14: 00000000e9de2418 x15: 0000000000000002
  140. x16: 0000000000000000 x17: 0000000000000000
  141. x18: 00000000e9de5d98 x19: 00000000f5ea5000
  142. x20: 0000000008300000 x21: 000000000841e600
  143. x22: 0000000000000000 x23: 000000000001f600
  144. x24: 0000000008300000 x25: 00000000f5ec2000
  145. x26: 0000000000000000 x27: 0000000000000000
  146. x28: 0000000000000000 x29: 00000000e9de2200

  148. SP:
  149. e9de2020:  00000000 00000000 00000000 00000000
  150. e9de2030:  00000000 00000000 f5e9be9f 00000000
  151. e9de2040:  00000000 00000000 00000000 00000000
  152. e9de2050:  f5e9bee6 00000000 f5e9bf0c 00000000
  153. e9de2060:  f5e9bf59 00000000 f5e9bfa6 00000000
  154. e9de2070:  f5e9bfe6 00000000 f5e9c026 00000000
  155. e9de2080:  f5e9c063 00000000 00000000 00000000
  156. e9de2090:  00000000 00000000 f5e9c0a0 00000000
  157. e9de20a0:  e9de2200 00000000 f5deea0c 00000000
  158. e9de20b0:  f5ea5000 00000000 08300000 00000000
  159. e9de20c0:  f7ff0000 00000000 0800003a 00000000
  160. e9de20d0:  30c51835 00000000 e9de2020 00000000
  161. e9de20e0:  20000349 00000000 f5dee800 00000000
  162. e9de20f0:  000003c0 00000000 96000010 00000000
  163. e9de2100:  f5e7207c 00000000 0841e600 00000000
  164. e9de2110:  f5e8fb8e 00000000 00000004 00000000

  166. Resetting CPU ...

  168. WAR▒DDR Version 1.19 20190305
  169. In
  170. soft reset
  171. SRX
  172. Channel 0: DDR3, 800MHz
  173. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  174. Channel 1: DDR3, 800MHz
  175. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  176. 256B stride
  177. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  178. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  179. pmugrf_os_reg[2] = 0x3AA17AA1, stride = 0xD
  180. OUT
  181. Boot1: 2019-03-14, version: 1.19
  182. CPUId = 0x0
  183. ChipType = 0x10, 293
  184. SdmmcInit=2 0
  185. BootCapSize=100000
  186. UserCapSize=119276MB
  187. FwPartOffset=2000 , 100000
  188. mmc0:cmd8,20
  189. mmc0:cmd5,20
  190. mmc0:cmd55,20
  191. mmc0:cmd1,20
  192. mmc0:cmd8,20
  193. mmc0:cmd5,20
  194. mmc0:cmd55,20
  195. mmc0:cmd1,20
  196. mmc0:cmd8,20
  197. mmc0:cmd5,20
  198. mmc0:cmd55,20
  199. mmc0:cmd1,20
  200. SdmmcInit=0 1
  201. StorageInit ok = 67846
  202. SecureMode = 0
  203. SecureInit read PBA: 0x4
  204. SecureInit read PBA: 0x404
  205. SecureInit read PBA: 0x804
  206. SecureInit read PBA: 0xc04
  207. SecureInit read PBA: 0x1004
  208. SecureInit read PBA: 0x1404
  209. SecureInit read PBA: 0x1804
  210. SecureInit read PBA: 0x1c04
  211. SecureInit ret = 0, SecureMode = 0
  212. atags_set_bootdev: ret:(0)
  213. GPT part:  0, name:            uboot, start:0x4000, size:0x2000
  214. GPT part:  1, name:            trust, start:0x6000, size:0x2000
  215. GPT part:  2, name:             boot, start:0xa000, size:0x10000
  216. GPT part:  3, name:           backup, start:0x2a000, size:0x10000
  217. GPT part:  4, name:           rootfs, start:0x5a000, size:0xe89bfdf
  218. find part:uboot OK. first_lba:0x4000.
  219. find part:trust OK. first_lba:0x6000.
  220. LoadTrust Addr:0x6000
  221. No find bl30.bin
  222. Load uboot, ReadLba = 4000
  223. Load OK, addr=0x200000, size=0xd6fac
  224. RunBL31 0x10000
  225. NOTICE:  BL31: v1.3(debug):370ab80
  226. NOTICE:  BL31: Built : 09:23:41, Mar  4 2019
  227. NOTICE:  BL31: Rockchip release version: v1.1
  228. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  229. INFO:    Using opteed sec cpu_context!
  230. INFO:    boot cpu mask: 0
  231. INFO:    plat_rockchip_pmu_init(1181): pd status 3e
  232. INFO:    BL31: Initializing runtime services
  233. INFO:    BL31: Initializing BL32
  234. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec  7 06:11:20 UTC 2018 aarch64)

  236. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

  238. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
  239. INFO:    BL31: Preparing for EL3 exit to normal world
  240. INFO:    Entry point address = 0x200000
  241. INFO:    SPSR = 0x3c9


  244. U-Boot 2017.09-02577-g0b1f585 (Apr 03 2019 - 10:12:37 +0800)

  246. Model: Firefly-RK3399 Board
  247. PreSerial: 2
  248. DRAM:  3.8 GiB
  249. Relocation Offset is: f5bee000
  250. Sysmem: init
  251. Using default environment

  253. dwmmc@fe320000: 1, sdhci@fe330000: 0
  254. Bootdev(atags): mmc 0
  255. PartType: EFI
  256. get part misc fail -1
  257. boot mode: normal
  258. bad resource image magic:
  259. DTB: rk-kernel.dtb
  260. invalid entry tag
  261. invalid entry tag
  262. invalid entry tag
  263. invalid entry tag
  264. invalid entry tag
  265. invalid entry tag
  266. invalid entry tag
  267. invalid entry tag
  268. "Synchronous Abort" handler, esr 0x96000010
  269. * Relocate offset = 00000000f5bee000
  270. * ELR(PC)    =   000000000028407c
  271. * LR         =   0000000000203a8c
  272. * SP         =   00000000e9de2020

  274. * ESR_EL2    =   0000000096000010
  275.         EC[31:26] == 100101, Exception from a Data abort, from current exception level
  276.         IL[25] == 1, 32-bit instruction trapped

  278. * DAIF       =   00000000000003c0
  279.         D[9] == 1, DBG masked
  280.         A[8] == 1, ABORT masked
  281.         I[7] == 1, IRQ masked
  282.         F[6] == 1, FIQ masked

  284. * SPSR_EL2   =   0000000020000349
  285.         D[9] == 1, DBG masked
  286.         A[8] == 1, ABORT masked
  287.         I[7] == 0, IRQ not masked
  288.         F[6] == 1, FIQ masked
  289.         M[4] == 0, Exception taken from AArch64
  290.         M[3:0] == 1001, EL2h

  292. * SCTLR_EL2  =   0000000030c51835
  293.         I[12] == 1, Icaches enabled
  294.         C[2] == 1, Dcache enabled
  295.         M[0] == 1, MMU enabled

  297. * HCR_EL2    =   000000000800003a
  298. * VBAR_EL2   =   00000000f5dee800
  299. * TTBR0_EL2  =   00000000f7ff0000

  301. x0 : 000000000841e600 x1 : 00000000f5e8fb8e
  302. x2 : 0000000000000004 x3 : 00000000ff1a0000
  303. x4 : 0000000000000000 x5 : 0000000000000004
  304. x6 : 000000000841e600 x7 : 00000000f5ea7f40
  305. x8 : 00000000e9de20c0 x9 : 0000000000000008
  306. x10: 00000000ffffffd8 x11: 0000000000000006
  307. x12: 000000000001869f x13: 0000000000000200
  308. x14: 00000000e9de2418 x15: 0000000000000002
  309. x16: 0000000000000000 x17: 0000000000000000
  310. x18: 00000000e9de5d98 x19: 00000000f5ea5000
  311. x20: 0000000008300000 x21: 000000000841e600
  312. x22: 0000000000000000 x23: 000000000001f600
  313. x24: 0000000008300000 x25: 00000000f5ec2000
  314. x26: 0000000000000000 x27: 0000000000000000
  315. x28: 0000000000000000 x29: 00000000e9de2200

  317. SP:
  318. e9de2020:  00000000 00000000 00000000 00000000
  319. e9de2030:  00000000 00000000 f5e9be9f 00000000
  320. e9de2040:  00000000 00000000 00000000 00000000
  321. e9de2050:  f5e9bee6 00000000 f5e9bf0c 00000000
  322. e9de2060:  f5e9bf59 00000000 f5e9bfa6 00000000
  323. e9de2070:  f5e9bfe6 00000000 f5e9c026 00000000
  324. e9de2080:  f5e9c063 00000000 00000000 00000000
  325. e9de2090:  00000000 00000000 f5e9c0a0 00000000
  326. e9de20a0:  e9de2200 00000000 f5deea0c 00000000
  327. e9de20b0:  f5ea5000 00000000 08300000 00000000
  328. e9de20c0:  f7ff0000 00000000 0800003a 00000000
  329. e9de20d0:  30c51835 00000000 e9de2020 00000000
  330. e9de20e0:  20000349 00000000 f5dee800 00000000
  331. e9de20f0:  000003c0 00000000 96000010 00000000
  332. e9de2100:  f5e7207c 00000000 0841e600 00000000
  333. e9de2110:  f5e8fb8e 00000000 00000004 00000000

  335. Resetting CPU ...

  337. WAR▒DDR Version 1.19 20190305
  338. In
  339. soft reset
  340. SRX
  341. Channel 0: DDR3, 800MHz
  342. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  343. Channel 1: DDR3, 800MHz
  344. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  345. 256B stride
  346. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  347. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  348. pmugrf_os_reg[2] = 0x3AA17AA1, stride = 0xD
  349. OUT
  350. Boot1: 2019-03-14, version: 1.19
  351. CPUId = 0x0
  352. ChipType = 0x10, 292
  353. SdmmcInit=2 0
  354. BootCapSize=100000
  355. UserCapSize=119276MB
  356. FwPartOffset=2000 , 100000
  357. mmc0:cmd8,20
  358. mmc0:cmd5,20
  359. mmc0:cmd55,20
  360. mmc0:cmd1,20
  361. mmc0:cmd8,20
  362. mmc0:cmd5,20
  363. mmc0:cmd55,20
  364. mmc0:cmd1,20
  365. mmc0:cmd8,20
  366. mmc0:cmd5,20
  367. mmc0:cmd55,20
  368. mmc0:cmd1,20
  369. SdmmcInit=0 1
  370. StorageInit ok = 67906
  371. SecureMode = 0
  372. SecureInit read PBA: 0x4
  373. SecureInit read PBA: 0x404
  374. SecureInit read PBA: 0x804
  375. SecureInit read PBA: 0xc04
  376. SecureInit read PBA: 0x1004
  377. SecureInit read PBA: 0x1404
  378. SecureInit read PBA: 0x1804
  379. SecureInit read PBA: 0x1c04
  380. SecureInit ret = 0, SecureMode = 0
  381. atags_set_bootdev: ret:(0)
  382. GPT part:  0, name:            uboot, start:0x4000, size:0x2000
  383. GPT part:  1, name:            trust, start:0x6000, size:0x2000
  384. GPT part:  2, name:             boot, start:0xa000, size:0x10000
  385. GPT part:  3, name:           backup, start:0x2a000, size:0x10000
  386. GPT part:  4, name:           rootfs, start:0x5a000, size:0xe89bfdf
  387. find part:uboot OK. first_lba:0x4000.
  388. find part:trust OK. first_lba:0x6000.
  389. LoadTrust Addr:0x6000
  390. No find bl30.bin
  391. Load uboot, ReadLba = 4000
  392. Load OK, addr=0x200000, size=0xd6fac
  393. RunBL31 0x10000
  394. NOTICE:  BL31: v1.3(debug):370ab80
  395. NOTICE:  BL31: Built : 09:23:41, Mar  4 2019
  396. NOTICE:  BL31: Rockchip release version: v1.1
  397. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  398. INFO:    Using opteed sec cpu_context!
  399. INFO:    boot cpu mask: 0
  400. INFO:    plat_rockchip_pmu_init(1181): pd status 3e
  401. INFO:    BL31: Initializing runtime services
  402. INFO:    BL31: Initializing BL32
  403. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec  7 06:11:20 UTC 2018 aarch64)

  405. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

  407. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
  408. INFO:    BL31: Preparing for EL3 exit to normal world
  409. INFO:    Entry point address = 0x200000
  410. INFO:    SPSR = 0x3c9


  413. U-Boot 2017.09-02577-g0b1f585 (Apr 03 2019 - 10:12:37 +0800)

  415. Model: Firefly-RK3399 Board
  416. PreSerial: 2
  417. DRAM:  3.8 GiB
  418. Relocation Offset is: f5bee000
  419. Sysmem: init
  420. Using default environment

  422. dwmmc@fe320000: 1, sdhci@fe330000: 0
  423. Bootdev(atags): mmc 0
  424. PartType: EFI
  425. get part misc fail -1
  426. boot mode: normal
  427. bad resource image magic:
  428. DTB: rk-kernel.dtb
  429. invalid entry tag
  430. invalid entry tag
  431. invalid entry tag
  432. invalid entry tag
  433. invalid entry tag
  434. invalid entry tag
  435. invalid entry tag
  436. invalid entry tag
  437. "Synchronous Abort" handler, esr 0x96000010
  438. * Relocate offset = 00000000f5bee000
  439. * ELR(PC)    =   000000000028407c
  440. * LR         =   0000000000203a8c
  441. * SP         =   00000000e9de2020

  443. * ESR_EL2    =   0000000096000010
  444.         EC[31:26] == 100101, Exception from a Data abort, from current exception level
  445.         IL[25] == 1, 32-bit instruction trapped

  447. * DAIF       =   00000000000003c0
  448.         D[9] == 1, DBG masked
  449.         A[8] == 1, ABORT masked
  450.         I[7] == 1, IRQ masked
  451.         F[6] == 1, FIQ masked

  453. * SPSR_EL2   =   0000000020000349
  454.         D[9] == 1, DBG masked
  455.         A[8] == 1, ABORT masked
  456.         I[7] == 0, IRQ not masked
  457.         F[6] == 1, FIQ masked
  458.         M[4] == 0, Exception taken from AArch64
  459.         M[3:0] == 1001, EL2h

  461. * SCTLR_EL2  =   0000000030c51835
  462.         I[12] == 1, Icaches enabled
  463.         C[2] == 1, Dcache enabled
  464.         M[0] == 1, MMU enabled

  466. * HCR_EL2    =   000000000800003a
  467. * VBAR_EL2   =   00000000f5dee800
  468. * TTBR0_EL2  =   00000000f7ff0000

  470. x0 : 000000000841e600 x1 : 00000000f5e8fb8e
  471. x2 : 0000000000000004 x3 : 00000000ff1a0000
  472. x4 : 0000000000000000 x5 : 0000000000000004
  473. x6 : 000000000841e600 x7 : 00000000f5ea7f40
  474. x8 : 00000000e9de20c0 x9 : 0000000000000008
  475. x10: 00000000ffffffd8 x11: 0000000000000006
  476. x12: 000000000001869f x13: 0000000000000200
  477. x14: 00000000e9de2418 x15: 0000000000000002
  478. x16: 0000000000000000 x17: 0000000000000000
  479. x18: 00000000e9de5d98 x19: 00000000f5ea5000
  480. x20: 0000000008300000 x21: 000000000841e600
  481. x22: 0000000000000000 x23: 000000000001f600
  482. x24: 0000000008300000 x25: 00000000f5ec2000
  483. x26: 0000000000000000 x27: 0000000000000000
  484. x28: 0000000000000000 x29: 00000000e9de2200

  486. SP:
  487. e9de2020:  00000000 00000000 00000000 00000000
  488. e9de2030:  00000000 00000000 f5e9be9f 00000000
  489. e9de2040:  00000000 00000000 00000000 00000000
  490. e9de2050:  f5e9bee6 00000000 f5e9bf0c 00000000
  491. e9de2060:  f5e9bf59 00000000 f5e9bfa6 00000000
  492. e9de2070:  f5e9bfe6 00000000 f5e9c026 00000000
  493. e9de2080:  f5e9c063 00000000 00000000 00000000
  494. e9de2090:  00000000 00000000 f5e9c0a0 00000000
  495. e9de20a0:  e9de2200 00000000 f5deea0c 00000000
  496. e9de20b0:  f5ea5000 00000000 08300000 00000000
  497. e9de20c0:  f7ff0000 00000000 0800003a 00000000
  498. e9de20d0:  30c51835 00000000 e9de2020 00000000
  499. e9de20e0:  20000349 00000000 f5dee800 00000000
  500. e9de20f0:  000003c0 00000000 96000010 00000000
  501. e9de2100:  f5e7207c 00000000 0841e600 00000000
  502. e9de2110:  f5e8fb8e 00000000 00000004 00000000

  504. Resetting CPU ...

  506. WAR▒DDR Version 1.19 20190305
  507. In
  508. soft reset
  509. SRX
  510. Channel 0: DDR3, 800MHz
  511. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  512. Channel 1: DDR3, 800MHz
  513. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  514. 256B stride
  515. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  516. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  517. pmugrf_os_reg[2] = 0x3AA17AA1, stride = 0xD
  518. OUT
  519. Boot1: 2019-03-14, version: 1.19
  520. CPUId = 0x0
  521. ChipType = 0x10, 293
  522. SdmmcInit=2 0
  523. BootCapSize=100000
  524. UserCapSize=119276MB
  525. FwPartOffset=2000 , 100000
  526. mmc0:cmd8,20
  527. mmc0:cmd5,20
  528. mmc0:cmd55,20
  529. mmc0:cmd1,20
  530. mmc0:cmd8,20
  531. mmc0:cmd5,20
  532. mmc0:cmd55,20
  533. mmc0:cmd1,20
  534. mmc0:cmd8,20
  535. mmc0:cmd5,20
  536. mmc0:cmd55,20
  537. mmc0:cmd1,20
  538. SdmmcInit=0 1
  539. StorageInit ok = 67988
  540. SecureMode = 0
  541. SecureInit read PBA: 0x4
  542. SecureInit read PBA: 0x404
  543. SecureInit read PBA: 0x804
  544. SecureInit read PBA: 0xc04
  545. SecureInit read PBA: 0x1004
  546. SecureInit read PBA: 0x1404
  547. SecureInit read PBA: 0x1804
  548. SecureInit read PBA: 0x1c04
  549. SecureInit ret = 0, SecureMode = 0
  550. atags_set_bootdev: ret:(0)
  551. GPT part:  0, name:            uboot, start:0x4000, size:0x2000
  552. GPT part:  1, name:            trust, start:0x6000, size:0x2000
  553. GPT part:  2, name:             boot, start:0xa000, size:0x10000
  554. GPT part:  3, name:           backup, start:0x2a000, size:0x10000
  555. GPT part:  4, name:           rootfs, start:0x5a000, size:0xe89bfdf
  556. find part:uboot OK. first_lba:0x4000.
  557. find part:trust OK. first_lba:0x6000.
  558. LoadTrust Addr:0x6000
  559. No find bl30.bin
  560. Load uboot, ReadLba = 4000
  561. Load OK, addr=0x200000, size=0xd6fac
  562. RunBL31 0x10000
  563. NOTICE:  BL31: v1.3(debug):370ab80
  564. NOTICE:  BL31: Built : 09:23:41, Mar  4 2019
  565. NOTICE:  BL31: Rockchip release version: v1.1
  566. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  567. INFO:    Using opteed sec cpu_context!
  568. INFO:    boot cpu mask: 0
  569. INFO:    plat_rockchip_pmu_init(1181): pd status 3e
  570. INFO:    BL31: Initializing runtime services
  571. INFO:    BL31: Initializing BL32
  572. INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec  7 06:11:20 UTC 2018 aarch64)

  574. INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

  576. INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
  577. INFO:    BL31: Preparing for EL3 exit to normal world
  578. INFO:    Entry point address = 0x200000
  579. INFO:    SPSR = 0x3c9


  582. U-Boot 2017.09-02577-g0b1f585 (Apr 03 2019 - 10:12:37 +0800)

  584. Model: Firefly-RK3399 Board
  585. PreSerial: 2
  586. DRAM:  3.8 GiB
  587. Relocation Offset is: f5bee000
  588. S
复制代码

作者: Yzh    时间: 2019-7-2 14:18
强制进入maskrom模式，重新烧我们的固件就行
作者: 休息的风    时间: 2019-7-2 14:27
Yzh 发表于 2019-7-2 14:18
强制进入maskrom模式，重新烧我们的固件就行

这种操作出现硬件问题，在保修期内你们负责售后吗？
作者: Yzh    时间: 2019-7-2 15:39
休息的风 发表于 2019-7-2 14:27
这种操作出现硬件问题，在保修期内你们负责售后吗？

你按照我们教程去操作是不会出现问题的
作者: 休息的风    时间: 2019-7-2 15:59
Yzh 发表于 2019-7-2 15:39
你按照我们教程去操作是不会出现问题的

我使用./build.sh updateimg 命令打包生成的update.img可以正常启动，但是我单独烧写如下文件中的kernel.img resource.img，板子会无限重启，是这两个文件有问题还是不能这样操作？
  1. wfly@wfly-VirtualBox:~/workspace/rk3399/linux/linux-sdk/kernel$ ls kernel.img resource.img
  2. kernel.img  resource.img
复制代码



捕获.PNG (1.76 KB, 下载次数: 2061)

捕获.PNG
作者: 休息的风    时间: 2019-7-2 16:21
Yzh 发表于 2019-7-2 15:39
你按照我们教程去操作是不会出现问题的

另外就是在MASKROM模式下，烧写一直出现图片中问题，该如何解决：


捕获.PNG (35.53 KB, 下载次数: 2167)

捕获.PNG
作者: Yzh    时间: 2019-7-3 10:58
休息的风 发表于 2019-7-2 16:21
另外就是在MASKROM模式下，烧写一直出现图片中问题，该如何解决：

你板子是3399还是3288？固件跟板卡型号有没有对应？
作者: 休息的风    时间: 2019-7-3 16:50
Yzh 发表于 2019-7-3 10:58
你板子是3399还是3288？固件跟板卡型号有没有对应？

是rk3399，用的链接中的源码：
http://www.t-firefly.com/doc/download/page/id/3.html
讲编译出来的文件打包烧写，板子可以运行。

但单独烧写kernel.img 、resource.img板子就会无限重启。是我的烧写方式有问题吗？
作者: 似火流年    时间: 2020-9-17 17:48
同学问题解决没，我也是出现你这个问题，烧了kernel.img后无限重启
作者: xmy    时间: 2020-10-9 15:06
似火流年 发表于 2020-9-17 17:48
同学问题解决没，我也是出现你这个问题，烧了kernel.img后无限重启

我也是，请问你的问题解决了没？
作者: BAI123    时间: 2022-5-7 17:58
请问解决了吗~我烧录update也会无限重启



欢迎光临 Firefly开源社区 (https://dev.t-firefly.com/) Powered by Discuz! X3.1