<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>Firefly开源社区 - ROC-RK3308-CC</title>
    <link>https://dev.t-firefly.com/forum-380-1.html</link>
    <description>Latest 20 threads of ROC-RK3308-CC</description>
    <copyright>Copyright(C) Firefly开源社区</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 20 Apr 2026 23:41:48 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://dev.t-firefly.com/static/image/common/logo_88_31.gif</url>
      <title>Firefly开源社区</title>
      <link>https://dev.t-firefly.com/</link>
    </image>
    <item>
      <title>编译NAND固件后声卡LINEOUT播放没声音</title>
      <link>https://dev.t-firefly.com/thread-139396-1-1.html</link>
      <description><![CDATA[编译NAND固件下载后Lineout没声音，详细如下：
设备树是通过rk3308-evb-amic-v10.dts修改，spk-ctl改为：GPIO0_C2(是空脚，没用)，因为静音要单独控制。

使用aplay播放Lineout没声音，amixer和alsamixer音量调节无效，
使用tinyplay只能播放/oem/AudioTest/下的wav ...]]></description>
      <category>ROC-RK3308-CC</category>
      <author>cc3308</author>
      <pubDate>Thu, 28 Aug 2025 03:22:07 +0000</pubDate>
    </item>
    <item>
      <title>请教大神 ROC-RK3308-CC 硬件位图哪里下载？</title>
      <link>https://dev.t-firefly.com/thread-135734-1-1.html</link>
      <description><![CDATA[请教大神 ROC-RK3308-CC 硬件位图哪里下载？


我的板子可能电源坏了，但是原理图上的电源芯片在板子上具体位置，请问去哪里才能找到 PCB位图。


PCB 上丝印是  2019-02-19 V12]]></description>
      <category>ROC-RK3308-CC</category>
      <author>coffeecn</author>
      <pubDate>Thu, 08 May 2025 09:04:32 +0000</pubDate>
    </item>
    <item>
      <title>ROC-RK3308B-CC-PLUS 询问如何修改DDR的操作频率?</title>
      <link>https://dev.t-firefly.com/thread-130766-1-1.html</link>
      <description><![CDATA[想询问下 DDR的操作频率可以在哪个地方进行修改?

========================================
log:
     
查了一下 Datasheet 里 DDR3 可支持到1600 (800Mhz)
    

网上有 Rockchip-Developer-Guide-DDR-CN 内有写着
     


但 RK3308.dtsi 的dmc节点没看 ...]]></description>
      <category>ROC-RK3308-CC</category>
      <author>justeg2</author>
      <pubDate>Wed, 25 Dec 2024 01:39:21 +0000</pubDate>
    </item>
    <item>
      <title>rk3308如何加载vad Switch控件</title>
      <link>https://dev.t-firefly.com/thread-130744-1-1.html</link>
      <description><![CDATA[更新到kernel 5.10版本 可以确认vad驱动已经加载 可以设置vad的reg的值但vad Switch控件依旧没有出现root@rk3308b-buildroot:/# tinymix contents
Number of controls: 56
ctl type num name value
0 ENUM 1 Receive PATH3 Source Select From SDI0From SDI1From SDI ...]]></description>
      <category>ROC-RK3308-CC</category>
      <author>Devil°</author>
      <pubDate>Fri, 29 Nov 2024 09:30:01 +0000</pubDate>
    </item>
    <item>
      <title>一个关于RK3308 i2s_8ch_1和i2s_8ch_2 的问题</title>
      <link>https://dev.t-firefly.com/thread-130731-1-1.html</link>
      <description><![CDATA[固件没问什么问题，就是想知道咋看的。。。
新手小白，请教下如何从硬件上区分使用的是i2s_8ch_1 还是i2s_8ch_2呢
我看原理图上只能区分出i2s_2ch_x 和i2s_8ch_x
后面具体的通道怎么确定呢？


而且rk3308这个i2s_8ch 单向数输出sdo只有4个通道， ...]]></description>
      <category>ROC-RK3308-CC</category>
      <author>wx__DGhDR4</author>
      <pubDate>Wed, 20 Nov 2024 09:47:26 +0000</pubDate>
    </item>
    <item>
      <title>gstreamer 无法播放mp3音频</title>
      <link>https://dev.t-firefly.com/thread-130709-1-1.html</link>
      <description><![CDATA[Missing element: ID3 tag demuxer
WARNING: from element /GstPlayBin:playbin0/GstURIDecodeBin:uridecodebin0: No decoder available for type \'application/x-id3\'.
Additional debug info:
../gst/playback/gsturidecodebin.c(998): unknown_type_cb (): /GstPl ..]]></description>
      <category>ROC-RK3308-CC</category>
      <author>墨瞳</author>
      <pubDate>Fri, 01 Nov 2024 06:30:35 +0000</pubDate>
    </item>
    <item>
      <title>ROC-RK3308B-CC-PLUS开发板-RTC</title>
      <link>https://dev.t-firefly.com/thread-130704-1-1.html</link>
      <description><![CDATA[您好！
开发板原理图上面RTC芯片为TT8563，但是在开发板上面没贴该RTC，请问下这颗芯片具体是哪个型号？release的sdk下进去，RTC能否工作？[/backcolor]]]></description>
      <category>ROC-RK3308-CC</category>
      <author>huangwenjian</author>
      <pubDate>Tue, 29 Oct 2024 02:17:14 +0000</pubDate>
    </item>
    <item>
      <title>打包失败</title>
      <link>https://dev.t-firefly.com/thread-130651-1-1.html</link>
      <description><![CDATA[执行./build.sh updateimg 时失败

前期的命令都是正确的  ，./build.sh uboot &amp;&amp; ./build.sh kernel &amp;&amp; ./build.sh recovery &amp;&amp; ./build.sh buildroot

打包的时候失败了]]></description>
      <category>ROC-RK3308-CC</category>
      <author>黄鸿志</author>
      <pubDate>Mon, 23 Sep 2024 12:28:53 +0000</pubDate>
    </item>
    <item>
      <title>开机充电图片放在哪个img，哪个分区。我想更换</title>
      <link>https://dev.t-firefly.com/thread-130650-1-1.html</link>
      <description><![CDATA[开机充电图片放在哪个img，哪个分区。我想更换]]></description>
      <category>ROC-RK3308-CC</category>
      <author>黄鸿志</author>
      <pubDate>Mon, 23 Sep 2024 09:54:44 +0000</pubDate>
    </item>
    <item>
      <title>rk3308开机启动不了，会卡在启动的某个位置</title>
      <link>https://dev.t-firefly.com/thread-130602-1-1.html</link>
      <description><![CDATA[自己设计的rk3308电路，系统启动到某个地方卡死了，急需大牛们给解决一下。以下是打印的信息。


DDR Version V2.06 20211109
CHIP ID = 0x00003308
REG2C: 0x00000032, 0x00000032
In
451MHz
DDR2
Col=10 Bank=2 Row=13 Size=64MB
OUT: sdram_init finish.
 ...]]></description>
      <category>ROC-RK3308-CC</category>
      <author>TUTI</author>
      <pubDate>Fri, 30 Aug 2024 10:17:32 +0000</pubDate>
    </item>
    <item>
      <title>ROC-RK3308-CC编译失败问题</title>
      <link>https://dev.t-firefly.com/thread-130517-1-1.html</link>
      <description><![CDATA[murphy@ubuntu:~/work$ lsb_release -a
No LSB modules are available.
Distributor ID:]]></description>
      <category>ROC-RK3308-CC</category>
      <author>Sesion2008</author>
<enclosure url="/forum/Ubuntu 16.04.2 LTS
Release:" length="16.04
Codename:" type="image/jpeg" />      <pubDate>Fri, 02 Aug 2024 09:51:53 +0000</pubDate>
    </item>
    <item>
      <title>默认只有2G，升级完Ubuntu desktop就直接满了，怎么扩容</title>
      <link>https://dev.t-firefly.com/thread-130329-1-1.html</link>
      <description><![CDATA[]]></description>
      <category>ROC-RK3308-CC</category>
      <author>lincc</author>
      <pubDate>Fri, 07 Jun 2024 05:45:50 +0000</pubDate>
    </item>
    <item>
      <title>连接串口过后一直疯狂打印dclk_vop_frac parent_rate(225791999) is low than rate...</title>
      <link>https://dev.t-firefly.com/thread-130327-1-1.html</link>
      <description><![CDATA[这是什么情况？]]></description>
      <category>ROC-RK3308-CC</category>
      <author>lincc</author>
      <pubDate>Thu, 06 Jun 2024 16:32:17 +0000</pubDate>
    </item>
    <item>
      <title>无法进入loader</title>
      <link>https://dev.t-firefly.com/thread-130314-1-1.html</link>
      <description><![CDATA[开发板刚到时可以进入loader模式，并更新了官方提供的“ROC-RK3308B-CC-PLUS Ubuntu Minimal固件”，现在想更新下内核固件，发现无法进入loader，Androidtools工具检测不到，硬件上电前按按键也试过，命令reboot loader也试过了，tool还是检测不到ADB设备]]></description>
      <category>ROC-RK3308-CC</category>
      <author>leo159</author>
      <pubDate>Tue, 04 Jun 2024 05:34:35 +0000</pubDate>
    </item>
    <item>
      <title>RK3308更换emmc后无法挂载文件系统</title>
      <link>https://dev.t-firefly.com/thread-130303-1-1.html</link>
      <description><![CDATA[请教下，我用RK3308H的芯片，更换emmc，大小同样是8G的，但是在kernel启动后提示无法挂载文件系统，但是在uboot中使用mmc info是能够看到emmc的容量等信息的。
=&gt; mmc info
Device: dwmmc@ff490000
Manufacturer ID: 32
OEM: 101
Name: MMC8G
Timing Interface: H ...]]></description>
      <category>ROC-RK3308-CC</category>
      <author>14132201838</author>
      <pubDate>Thu, 30 May 2024 06:55:13 +0000</pubDate>
    </item>
    <item>
      <title>ROC-RK3308B-CC-PLUS 录音没声音</title>
      <link>https://dev.t-firefly.com/thread-130302-1-1.html</link>
      <description><![CDATA[所使用命令：

[*]amixer cset name=\'ADC MIC Group 0 Left Volume\'  3   # mic1,range 0-&gt;3
[*]amixer cset name=\'ADC MIC Group 0 Right Volume\' 3   # mic2,range 0-&gt;3
[*]amixer cset name=\'ADC ALC Group 0 Left Volume\'  13  # mic1,range 0-&gt;31
[*]amixer c ...]]></description>
      <category>ROC-RK3308-CC</category>
      <author>LXC</author>
      <pubDate>Thu, 30 May 2024 06:22:25 +0000</pubDate>
    </item>
    <item>
      <title>通过SFTP上传大于20M的文件就传输错误，无法从ADB模式切换到Load模式等问题</title>
      <link>https://dev.t-firefly.com/thread-130243-1-1.html</link>
      <description><![CDATA[购买了5个盒子，其中一个通过SFTP上传的时候，一旦文件大于20M就传输错误。
通过RKDevTool无法从ADB切换到Load。

后来寄给你们技术处理，经过2周的时间原封不动又寄给我了，仍然没有解决。

寄回来后，我通过短路模式MASK模式下重新刷新了固件，结果插上无线无法 ...]]></description>
      <category>ROC-RK3308-CC</category>
      <author>chenjuchuan</author>
      <pubDate>Mon, 06 May 2024 09:45:08 +0000</pubDate>
    </item>
    <item>
      <title>RK3308的音频DTS问题</title>
      <link>https://dev.t-firefly.com/thread-130196-1-1.html</link>
      <description><![CDATA[3308提供多通道录音，我需要知道如何写DTS

根据代码，可以使用multi-dais，但是怎么连接multi-dais和录音通道，怎么绑定16通道录音，这些完全没有例子
当然可以看代码一点点抠，有点慢

请问是否可以问厂家要下如何写dts，然后连接
mult-dais
simple-audio-card ...]]></description>
      <category>ROC-RK3308-CC</category>
      <author>powerpan</author>
      <pubDate>Wed, 17 Apr 2024 03:09:52 +0000</pubDate>
    </item>
    <item>
      <title>在选择加入ADB功能后，固件编译提示liblog没有选择</title>
      <link>https://dev.t-firefly.com/thread-130095-1-1.html</link>
      <description><![CDATA[小白一枚，在手上有一块ROC-RK3308B-CC-PLUS的板子，按照官网上的操作步骤，对SDK解压完成后，进行编译。make后提示liblog在依赖变量里没有被选择。编译结果如图所示。请教各位大神这个问题如何解决？？]]></description>
      <category>ROC-RK3308-CC</category>
      <author>sunmoon6024</author>
      <pubDate>Tue, 26 Mar 2024 02:14:28 +0000</pubDate>
    </item>
    <item>
      <title>修改DEBUG口</title>
      <link>https://dev.t-firefly.com/thread-130089-1-1.html</link>
      <description><![CDATA[开发板当前使用的DEBUG口为 UART4， 我需要将DEBUG口，改为 UART2,请问如何修改]]></description>
      <category>ROC-RK3308-CC</category>
      <author>wx__rlwd41</author>
      <pubDate>Mon, 25 Mar 2024 03:25:58 +0000</pubDate>
    </item>
  </channel>
</rss>