<?xml version="1.0" encoding="gbk"?>
<rss version="2.0">
  <channel>
    <title>Firefly开源社区 - AIO-3288J</title>
    <link>https://dev.t-firefly.com/forum-588-1.html</link>
    <description>Latest 20 threads of AIO-3288J</description>
    <copyright>Copyright(C) Firefly开源社区</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Mon, 20 Apr 2026 23:42:39 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>https://dev.t-firefly.com/static/image/common/logo_88_31.gif</url>
      <title>Firefly开源社区</title>
      <link>https://dev.t-firefly.com/</link>
    </image>
    <item>
      <title>删除userdata分区后，执行apt update就死机，需要断电才可以启动</title>
      <link>https://dev.t-firefly.com/thread-129956-1-1.html</link>
      <description><![CDATA[问题1：
WiFi正常驱动使用，蓝牙一直加载firmware失败




问题2：
执行 apt update就死机。是要修改emmc的速率吗？]]></description>
      <category>AIO-3288J</category>
      <author>a751116023</author>
      <pubDate>Mon, 15 Jan 2024 10:19:06 +0000</pubDate>
    </item>
    <item>
      <title>如何調整LVDS訊號的輸出電流</title>
      <link>https://dev.t-firefly.com/thread-129797-1-1.html</link>
      <description><![CDATA[LVDS輸出某塊屏幕發現會有一部分畫面異常如下圖，


將輸出的LVDS data clock調降33%後才能有顯著改善，請參考下圖(此片屏只差在無背光模組其他皆與上圖中一致)，



因此想嘗試調大輸出的LVDS訊號電流觀察是否有改善此現象，查找相關的dts檔沒發現與調整LVDS電 ...]]></description>
      <category>AIO-3288J</category>
      <author>BBBBB</author>
      <pubDate>Fri, 17 Nov 2023 03:30:08 +0000</pubDate>
    </item>
    <item>
      <title>SPI 驱动</title>
      <link>https://dev.t-firefly.com/thread-129610-1-1.html</link>
      <description><![CDATA[在/dev/目录下没spi-0设备节点，请问如何配置才能在应用层操作/dev/spi-0设备节点。]]></description>
      <category>AIO-3288J</category>
      <author>ebang</author>
      <pubDate>Mon, 11 Sep 2023 11:46:01 +0000</pubDate>
    </item>
    <item>
      <title>添加软件包之后，buidroot编译总是失败</title>
      <link>https://dev.t-firefly.com/thread-129569-1-1.html</link>
      <description><![CDATA[需要的是buildroot固件，固件安装步骤编译成功，并且烧到板子李全部正常。
现在要添加新的库，重新编译，按照如下操作步骤，最终报错。
1. 用下面命令，清除buildroot下的output文件夹
rm -rf output/
2. 再切到SDK根目录执行下面的命令

3.切换到/buildroot/outp ...]]></description>
      <category>AIO-3288J</category>
      <author>wx__VL1YKv</author>
      <pubDate>Wed, 30 Aug 2023 03:01:10 +0000</pubDate>
    </item>
    <item>
      <title>AIO-3288j 打包buildroot固件失败</title>
      <link>https://dev.t-firefly.com/thread-129539-1-1.html</link>
      <description><![CDATA[部分编译全部成功之后，执行打包固件命令，总是失败]]></description>
      <category>AIO-3288J</category>
      <author>wx__VL1YKv</author>
      <pubDate>Wed, 23 Aug 2023 06:35:48 +0000</pubDate>
    </item>
    <item>
      <title>修改配置MIPI屏后开机反复重启， MIPI分辨率2340*1080</title>
      <link>https://dev.t-firefly.com/thread-125239-1-1.html</link>
      <description><![CDATA[开机反复重启，显示LOG界面一会就灭了，然后再次显示LOG界面]]></description>
      <category>AIO-3288J</category>
      <author>AlexCheng</author>
      <pubDate>Mon, 24 Oct 2022 10:28:11 +0000</pubDate>
    </item>
    <item>
      <title>RK3288 官方配套的Qt 5.9.5开发环境在哪下载？</title>
      <link>https://dev.t-firefly.com/thread-124339-1-1.html</link>
      <description><![CDATA[针对 RK3288,官方给一个的开发环境　
firefly-qt-5.12.2-arm.tar.gz 

但这套有一个问题 glibc需要 2.29.

但AIO-3288J最新的固件下是ubuntu 18.04,里面的glibc 是 2.27的。

这样这套5.12.2 编译出来程序一运行，就在板上提示

/lib/arm-linux-gnueabihf/li ...]]></description>
      <category>AIO-3288J</category>
      <author>bluedrum</author>
      <pubDate>Thu, 15 Sep 2022 10:10:02 +0000</pubDate>
    </item>
    <item>
      <title>aio 3288j   DEBIAN固件的 SSH  账号密码</title>
      <link>https://dev.t-firefly.com/thread-124298-1-1.html</link>
      <description><![CDATA[我刚开始用 AIO3288J,  下载了DEBIAN固件，2019版，想SSH进去调试，按说明书的firefly密码 账号都不进不了,请问SSH的账号密码是啥]]></description>
      <category>AIO-3288J</category>
      <author>hzwjh</author>
      <pubDate>Wed, 14 Sep 2022 08:50:04 +0000</pubDate>
    </item>
    <item>
      <title>AIO-3288J四核开发板 用的HDMI IN 芯片是RK628D吗</title>
      <link>https://dev.t-firefly.com/thread-124042-1-1.html</link>
      <description><![CDATA[问题如题，目前AIO-3288J的HDMI IN 用的RK628D吗？现在东芝的转换芯片停产了，而RK628D的性价比用比较高，想买一块带628D的板卡看下效果，所以想确认下firefly的HDMI IN 用的是不是RK628D]]></description>
      <category>AIO-3288J</category>
      <author>风在摇曳风铃</author>
      <pubDate>Fri, 29 Jul 2022 08:28:28 +0000</pubDate>
    </item>
    <item>
      <title>RK3288 Buildroot 系统alc5640音频通路配置</title>
      <link>https://dev.t-firefly.com/thread-118576-1-1.html</link>
      <description><![CDATA[我现在在RK3288_Buildroot系统下想进行音频播放，现在是直接通过amixer一个个的去配的，请问怎么能去写一个asound.conf或者直接在内核驱动里面去汇总搞一个playback path然后用amixer去选择啊]]></description>
      <category>AIO-3288J</category>
      <author>wf908164152</author>
      <pubDate>Wed, 13 Apr 2022 01:19:25 +0000</pubDate>
    </item>
    <item>
      <title>官方buildroot无法运行官方QTdemo</title>
      <link>https://dev.t-firefly.com/thread-118503-1-1.html</link>
      <description><![CDATA[烧录了官方给的buildroot系统
Buildroot\\AIO-3568J-BUILDROOT-GPT-20220222-1658\\AIO-3568J-BUILDROOT-GPT-20220222-1658\\AIO-3568J-BUILDROOT-GPT-20220222-1658.img

主机执行
tar -zxvf firefly-qt-5.12.2-aarch64.tar.gz
[/backcolor]
cd firefly-qt-5.12.2-a ...]]></description>
      <category>AIO-3288J</category>
      <author>tieshou200</author>
      <pubDate>Sat, 02 Apr 2022 02:49:47 +0000</pubDate>
    </item>
    <item>
      <title>3288J 3288C这两款usb问题</title>
      <link>https://dev.t-firefly.com/thread-117110-1-1.html</link>
      <description><![CDATA[这两款板子我们调试usb摄像头。发现用libuvc的库无法预览摄像头。

看了原理图发现usb是用了hub。我们改成不使用hub，直通到底板的usb端口，结果连usb摄像头设备都检测不到了。
提示log 

[  733.154747] Using Buffer DMA mode
[  733.154766] Periodic Transfer ...]]></description>
      <category>AIO-3288J</category>
      <author>dongyi190120</author>
      <pubDate>Fri, 11 Mar 2022 07:38:37 +0000</pubDate>
    </item>
    <item>
      <title>烧录ubuntu固件后，屏幕一直停留在logo页面</title>
      <link>https://dev.t-firefly.com/thread-114864-1-1.html</link>
      <description><![CDATA[根据这个教程来做的https://wiki.t-firefly.com/zh_CN/AIO-3288J/linux_compile_gpt.html
执行./build.sh后得到的img文件进行烧录，成功了，但是就是进不去系统，不知道是什么问题，也看不了日志]]></description>
      <category>AIO-3288J</category>
      <author>syn</author>
      <pubDate>Wed, 17 Nov 2021 03:24:40 +0000</pubDate>
    </item>
    <item>
      <title>aio-3288j U盘自动挂载出错</title>
      <link>https://dev.t-firefly.com/thread-114775-1-1.html</link>
      <description><![CDATA[1）U盘自动格式化卷名为TEST，格式EXT4
2）使用aio3288j开发板，ubuntu18系统.
3）插入U盘，自动挂载为：/media/firefly/TEST
4）上述路径，firefly用户可以之间访问，摄像机视频流持续写入上述文件；
5）持续工作1天，第二天上午发现，系统崩溃，查找原因emmc系统 ...]]></description>
      <category>AIO-3288J</category>
      <author>jshunwang</author>
      <pubDate>Wed, 03 Nov 2021 08:29:23 +0000</pubDate>
    </item>
    <item>
      <title>人在屋顶 在线急等  急盼吊大的高手 AIO-3288 配套屏幕的问题</title>
      <link>https://dev.t-firefly.com/thread-105327-1-1.html</link>
      <description><![CDATA[我想做一款类似售货机的产品，需要一个很大的触摸屏幕最好是42寸左右，
我手里有AIO-3288J的开发板，有没有吊大的推荐一款大点的和开发板配套的屏幕。
一定要配套哟，最好可以直接驱动的，这样就省去了很多的工作量，毕竟有现成的驱动可以用嘛哈哈]]></description>
      <category>AIO-3288J</category>
      <author>15736148159</author>
      <pubDate>Tue, 14 Sep 2021 03:03:12 +0000</pubDate>
    </item>
    <item>
      <title>AIO-3288J不识别中文二维码</title>
      <link>https://dev.t-firefly.com/thread-104706-1-1.html</link>
      <description><![CDATA[AIO-3288J开发板，插上条码枪扫描带中文汉字的二维码，无法识别中文，这个有办法解决吗？是否可以定制？我们公司接下来至少还需要采购60块这个板子。

条码枪插电脑上，在记事本里是可以正常扫描识别出中文的。]]></description>
      <category>AIO-3288J</category>
      <author>lxf2580</author>
      <pubDate>Thu, 09 Sep 2021 07:13:52 +0000</pubDate>
    </item>
    <item>
      <title>内核裁剪编译出错</title>
      <link>https://dev.t-firefly.com/thread-104698-1-1.html</link>
      <description><![CDATA[去除蓝牙功能后编译连接出错]]></description>
      <category>AIO-3288J</category>
      <author>tdwj</author>
      <pubDate>Wed, 08 Sep 2021 02:58:09 +0000</pubDate>
    </item>
    <item>
      <title>3288如何在Ubuntu下安装其他桌面环境？</title>
      <link>https://dev.t-firefly.com/thread-104625-1-1.html</link>
      <description><![CDATA[我的3288在安装好Ubuntu默认图形界面gnome之后就会把系统弄坏
怎样才能正确安装？
（原来的界面实在是太丑了）]]></description>
      <category>AIO-3288J</category>
      <author>ImMrSky</author>
      <pubDate>Fri, 27 Aug 2021 01:22:23 +0000</pubDate>
    </item>
    <item>
      <title>rk3288 gpio</title>
      <link>https://dev.t-firefly.com/thread-104622-1-1.html</link>
      <description><![CDATA[找不到这个firefly-rk3288-aio-3288j.dts文件啊]]></description>
      <category>AIO-3288J</category>
      <author>大鲨鱼</author>
      <pubDate>Thu, 26 Aug 2021 02:59:40 +0000</pubDate>
    </item>
    <item>
      <title>rk3288 如何提升到1.8g</title>
      <link>https://dev.t-firefly.com/thread-104555-1-1.html</link>
      <description><![CDATA[目前官方固件cpu最大只能到1.6g，跟提到的支持1.8g不符，
如何提升到1.8g，sdk需要修改吗
哪位大佬知道]]></description>
      <category>AIO-3288J</category>
      <author>moccnc</author>
      <pubDate>Sun, 15 Aug 2021 03:08:28 +0000</pubDate>
    </item>
  </channel>
</rss>