px30 启动后报告已系列错误

tuf

我自己编译的固件，使用的源码是 linux-sdk-px30-20200512.7z

当PX30启动后，报告一系列错误如下，而且debug串口输入没有任何反应。

U-Boot 2017.09-g0c15140-dirty (May 29 2020 - 14:39:57 +0800)

Model: Rockchip PX30 EVB
PreSerial: 2
DRAM:  992 MiB
Sysmem: init
Relocation Offset is: 3dbe5000
Using default environment

dwmmc@ff370000: 1, dwmmc@ff390000: 0
Bootdev(atags): mmc 0
MMC0: HS200, 150Mhz
PartType: EFI
boot mode: None
init_resource_list: failed to get resource part, ret=-1
Read kernel dtb failed, ret=-19
Model: Rockchip PX30 EVB
CLK: (sync kernel. arm: enter 600000 KHz, init 600000 KHz, kernel 0 KHz)
  apll 600000 KHz
  dpll 664000 KHz
  cpll 24000 KHz
  npll 1188000 KHz
  gpll 1200000 KHz
  aclk_bus 200000 KHz
  hclk_bus 150000 KHz
  pclk_bus 100000 KHz
  aclk_peri 200000 KHz
  hclk_peri 150000 KHz
  pclk_pmu 100000 KHz
Net:   No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "(none)"
** Invalid Android Image header **
Android image load failed
Android boot failed, error -1.
=Booting Rockchip format image=
Could not found misc partition
Card did not respond to voltage select!
mmc_init: -95, time 9
switch to partitions #0, OK
mmc0(part 0) is current device
Failed to mount ext2 filesystem...
** Unrecognized filesystem type **
## Error: "rknand_boot" not defined
starting USB...
No controllers found
USB is stopped. Please issue 'usb start' first.
starting USB...
No controllers found
No ethernet found.
missing environment variable: pxeuuid
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/000
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/00
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/0
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm-rockchip
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default-arm
No ethernet found.
missing environment variable: bootfile
Retrieving file: pxelinux.cfg/default
No ethernet found.
Config file not found
starting USB...
No controllers found
No ethernet found.
=>

tuf

是由于配置脚本使用错误造成的。

lsk

tuf 发表于 2020-5-29 21:19
是由于配置脚本使用错误造成的。

你好  我现在也遇到了这个问题 能告诉一下怎么解决的吗  具体的解决方法