|
【硬件交流】
急,急,急,AIO-3399C开发板换了一颗emmc,然后固件跑一半没起来
发表于 2020-11-14 12:52:31
浏览:6566
|
回复:2
打印
只看该作者
[复制链接]
楼主
本想给AIO3399开发板换一颗32G的emmc,刷完固件后却跑不起来,然后换了一颗和开发板一样的KLMAG1JETD-B041 emmc,却怎么也跑不起来,总是到一半就卡住了。换emmc后需要对emmc做什么操作才能刷固件吗
开机log如下:
DDR Version 1.23 20190709
In
channel 0
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x3
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 1, cs 0, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3281F281, stride = 0x9
OUT
Boot1: 2018-08-06, version: 1.15
CPUId = 0x0
ChipType = 0x10, 223
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 67768
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
GPT 0x3190d20 signature is wrong
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0x84184
RunBL31 0x10000
NOTICE: BL31: v1.3(debug):22b599a
NOTICE: BL31: Built : 11:03:32, Jul 10 2019
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1181): pd status 3e
INFO: BL31: Initializing runtime services
INFO: BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-195-g8f090d20 #6 Fri Dec 7 06:11:20 UTC 2018 aarch64)
INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2
INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2014.10-RK3399-06 (May 06 2020 - 16:46:32)
CPU: rk3399
cpu version = 0
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 856000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Board: Rockchip platform Board
Uboot as second level loader
DRAM: Found dram banks: 1
Adding bank:0000000000200000(000000007fe00000)
Reserve memory for trust os.
dram reserve bank: base = 0x08400000, size = 0x01e00000
128 MiB
SdmmcInit = 0 20
storage init OK!
Using default environment
GetParam
Load FDT from resource image.
power key: bank-0 pin-5
can't find dts node for fixed
usb bc: can find node by path: /dwc-control-usb/usb_bc
dwc_otg_check_dpdm: usb bc disconnected
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =2 vol=1000000,pwm_value=60
CPU's clock information:
aplll = 816000000HZ
apllb = 24000000HZ
gpll = 800000000HZ
aclk_periph_h = 133333333HZ, hclk_periph_h = 66666666HZ, pclk_periph_h = 33333333HZ
aclk_periph_l0 = 266666666HZ, hclk_periph_l0 = 88888888HZ, pclk_periph_l0 = 44444444HZ
hclk_periph_l1 = 100000000HZ, pclk_periph_l1 = 50000000HZ
cpll = 800000000HZ
dpll = 856000000HZ
vpll = 24000000HZ
npll = 24000000HZ
ppll = 676000000HZ
Can't find dts node for fuel guage cw201x
can't find dts node for ec-battery
Can't find dts node for charger bq25700
invalide header tag
ca head not found
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 0000-00-00#0.00
empty serial no.
normal boot.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
Rockchip UBOOT DRM driver version: develop-v1.0.0
failed to find panel driver
read logo on state from dts [1]
no fuel gauge found
rockchip_panel_deinit: failed to find panel deinit funcs
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
failed to display kernel logo
got recovery cmd from misc.
load fdt from resouce.
hwversion: disabled!
Secure Boot state: 0
kernel @ 0x00280000 (0x0133e008)
ramdisk @ 0x04bf0000 (0x007552f0)
bootrk: do_bootm_linux...
Loading Device Tree to 0000000004600000, end 0000000004616bfd ... OK
Add bank:0000000000200000, 0000000008200000
Add bank:000000000a200000, 0000000075e00000
WARNING: could not set reg FDT_ERR_BADOFFSET.
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys schedtune
[ 0.000000] Linux version 4.4.126 (chengd@tchipserver2) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #24 SMP PREEMPT Thu Apr 16 14:41:25 CST 2020
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[ 0.000000] bootconsole [uart0] enabled
[ 0.000000] Reserved memory: failed to reserve memory for node 'stb-devinfo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] cma: Reserved 16 MiB at 0x000000007f000000
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: Trusted OS migration not required
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07eef8000 s45528 r8192 d32296 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 507912
[ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 coherent_pool=1m console=ttyFIQ0 androidboot.baseband=N/A androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyFIQ0 init=/init mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(trust),0x00002000@0x00006000(misc),0x00008000@0x00008000(resource),0x0000C000@0x00010000(kernel),0x00010000@0x0001C000(boot),0x00020000@0x0002C000(recovery),0x00038000@0x0004C000(backup),0x00040000@0x00084000(cache),0x00300000@0x000C4000(system),0x00100000@0x003C4000(oem),0x00008000@0x004C4000(metadata),0x00000040@0x004CC000(verity_mode),0x00002000@0x004CC040(reserved),0x00000400@0x004CE040(frp),-@0x004CE440(userdata) storagemedia=emmc androidboot.oem_unlocked=0 uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2020-05-06_16:46:32 SecureBootCheckOk=0
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] software IO TLB [mem 0x7eeb0000-0x7eef0000] (0MB) mapped at [ffffffc07eeb0000-ffffffc07eeeffff]
[ 0.000000] Memory: 1981812K/2064384K available (11390K kernel code, 1720K rwdata, 5716K rodata, 832K init, 1137K bss, 66188K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8009140000 - 0xffffff8009210000 ( 832 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008ba0000 ( 11392 KB)
[ 0.000000] .rodata : 0xffffff8008ba0000 - 0xffffff8009140000 ( 5760 KB)
[ 0.000000] .data : 0xffffff8009210000 - 0xffffff80093be008 ( 1721 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fb000 - 0xffffffbffec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @a200000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x000000000a280000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x000000000a290000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] rockchip_cpuclk_pre_rate_change: limiting alt-divider 33 to 31
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001946] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=80000)
[ 0.002933] pid_max: default: 32768 minimum: 301
[ 0.003438] Security Framework initialized
[ 0.003836] SELinux: Initializing.
[ 0.004280] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.004924] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.006401] Initializing cgroup subsys memory
[ 0.006842] Initializing cgroup subsys freezer
[ 0.008180] sched-energy: Sched-energy-costs installed from DT
[ 0.008743] CPU0: update cpu_capacity 401
[ 0.009205] ASID allocator initialised with 32768 entries
[ 0.026041] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.027342] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.039450] Detected VIPT I-cache on CPU1
[ 0.039484] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.039518] CPU1: using LPI pending table @0x000000000a3f0000
[ 0.039561] CPU1: update cpu_capacity 401
[ 0.039565] CPU1: Booted secondary processor [410fd034]
[ 0.049427] Detected VIPT I-cache on CPU2
[ 0.049447] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.049479] CPU2: using LPI pending table @0x000000007c020000
[ 0.049508] CPU2: update cpu_capacity 401
[ 0.049511] CPU2: Booted secondary processor [410fd034]
[ 0.059458] Detected VIPT I-cache on CPU3
[ 0.059477] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.059509] CPU3: using LPI pending table @0x000000007c060000
[ 0.059534] CPU3: update cpu_capacity 401
[ 0.059538] CPU3: Booted secondary processor [410fd034]
[ 0.069508] Detected PIPT I-cache on CPU4
[ 0.069534] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.069573] CPU4: using LPI pending table @0x000000007c0b0000
[ 0.069613] CPU4: update cpu_capacity 1024
[ 0.069616] CPU4: Booted secondary processor [410fd082]
[ 0.079531] Detected PIPT I-cache on CPU5
[ 0.079548] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.079584] CPU5: using LPI pending table @0x000000007c0e0000
[ 0.079611] CPU5: update cpu_capacity 1024
[ 0.079614] CPU5: Booted secondary processor [410fd082]
[ 0.079699] Brought up 6 CPUs
[ 0.092097] SMP: Total of 6 processors activated.
[ 0.092551] CPU features: detected feature: GIC system register CPU interface
[ 0.093239] CPU: All CPU(s) started at EL2
[ 0.093673] alternatives: patching kernel code
[ 0.096059] devtmpfs: initialized
[ 0.117123] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.118048] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.119355] pinctrl core: initialized pinctrl subsystem
[ 0.121426] Failed to find legacy iommu devices
[ 0.122222] NET: Registered protocol family 16
[ 0.123064] schedtune: init normalization constants...
[ 0.123568] schedtune: CLUSTER[0-3] min_pwr: 56 max_pwr: 222
[ 0.124183] schedtune: CPU[0] min_pwr: 0 max_pwr: 222
[ 0.124793] schedtune: CPU[1] min_pwr: 0 max_pwr: 222
[ 0.125402] schedtune: CPU[2] min_pwr: 0 max_pwr: 222
[ 0.126009] schedtune: CPU[3] min_pwr: 0 max_pwr: 222
[ 0.126618] schedtune: CLUSTER[4-5] min_pwr: 65 max_pwr: 1108
[ 0.127232] schedtune: CPU[4] min_pwr: 0 max_pwr: 1108
[ 0.127843] schedtune: CPU[5] min_pwr: 0 max_pwr: 1108
[ 0.128456] schedtune: SYSTEM min_pwr: 121 max_pwr: 4434
[ 0.129070] schedtune: using normalization constants mul: 3862781856 sh1: 1 sh2: 12
[ 0.129785] schedtune: verify normalization constants...
[ 0.130284] schedtune: max_pwr/2^0: 4313 => norm_pwr: 1024
[ 0.130810] schedtune: max_pwr/2^1: 2156 => norm_pwr: 511
[ 0.131332] schedtune: max_pwr/2^2: 1078 => norm_pwr: 255
[ 0.131856] schedtune: max_pwr/2^3: 539 => norm_pwr: 127
[ 0.132378] schedtune: max_pwr/2^4: 269 => norm_pwr: 63
[ 0.132899] schedtune: max_pwr/2^5: 134 => norm_pwr: 31
[ 0.133421] schedtune: configured to support 5 boost groups
[ 0.144187] cpuidle: using governor ladder
[ 0.154186] cpuidle: using governor menu
[ 0.154570] Registered FIQ tty driver
[ 0.155299] vdso: 2 pages (1 code @ ffffff8008ba6000, 1 data @ ffffff8009214000)
[ 0.156015] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.157706] DMA: preallocated 1024 KiB pool for atomic allocations
[ 0.178670] console [pstore-1] enabled
[ 0.179264] pstore: Registered ramoops as persistent store backend
[ 0.179847] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[ 0.183003] fiq debugger fiq mode enabled
[ [ 0.183633] console [ttyFIQ0] enabled
0.183633] console [ttyFIQ0] enabled
[ 0.184318] bootconsole [uart0] disabled
[ 0.184318] bootconsole [uart0] disabled
[ 0.184876] Registered fiq debugger ttyFIQ0
[ 0.218900] iommu: Adding device ff650000.vpu_service to group 0
[ 0.218977] iommu: Adding device ff660000.rkvdec to group 1
[ 0.219046] iommu: Adding device ff670000.iep to group 2
[ 0.219139] iommu: Adding device ff8f0000.vop to group 3
[ 0.219209] iommu: Adding device ff900000.vop to group 4
[ 0.219313] iommu: Adding device ff910000.isp to group 5
[ 0.219385] iommu: Adding device ff920000.isp to group 6
[ 0.220098] rk_iommu ff670800.iommu: can't get aclk
[ 0.220112] rk_iommu ff670800.iommu: can't get hclk
[ 0.220977] SCSI subsystem initialized
[ 0.221307] usbcore: registered new interface driver usbfs
[ 0.221353] usbcore: registered new interface driver hub
[ 0.221430] usbcore: registered new device driver usb
[ 0.221805] media: Linux media interface: v0.10
[ 0.221840] Linux video capture interface: v2.00
[ 0.222006] pps_core: LinuxPPS API ver. 1 registered
[ 0.222015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.222037] PTP clock support registered
[ 0.223708] Advanced Linux Sound Architecture Driver Initialized.
[ 0.224237] Bluetooth: Core ver 2.21
[ 0.224270] NET: Registered protocol family 31
[ 0.224278] Bluetooth: HCI device and connection manager initialized
[ 0.224292] Bluetooth: HCI socket layer initialized
[ 0.224304] Bluetooth: L2CAP socket layer initialized
[ 0.224330] Bluetooth: SCO socket layer initialized
[ 0.225099] rockchip-cpuinfo cpuinfo: Serial : d46f4da18d7efaa0
[ 0.225658] clocksource: Switched to clocksource arch_sys_counter
[ 0.270600] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.270837] NET: Registered protocol family 2
[ 0.271282] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.271425] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.271698] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.271777] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.271835] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.272014] NET: Registered protocol family 1
[ 0.272940] Trying to unpack rootfs image as initramfs...
[ 0.604475] Freeing initrd memory: 7508K
[ 0.605083] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.605171] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.608044] audit: initializing netlink subsys (disabled)
[ 0.608116] audit: type=2000 audit(0.603:1): initialized
[ 0.613328] VFS: Disk quotas dquot_6.6.0
[ 0.613460] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.614504] Registering sdcardfs 0.1
[ 0.615089] fuse init (API version 7.23)
[ 0.616210]
[ 0.616210] TEE Core Framework initialization (ver 1:0.1)
[ 0.616237] TEE armv7 Driver initialization
[ 0.616627] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
[ 0.616644] TEE core: Alloc the misc device "opteearmtz00" (id=0)
[ 0.616824] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
[ 0.620829] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.620851] io scheduler noop registered
[ 0.621014] io scheduler cfq registered (default)
[ 0.622287] phy phy-ff770000.syscon:usb2-phy@e460.0: Failed to get VBUS supply regulator
[ 0.625375] ace test_init function.
[ 0.625523] ace test_init end.ret=0
[ 0.625835] radar end.ret=0
[ 0.627757] iep: failed to find iep power down clock source.
[ 0.628108] IEP Power ON
[ 0.628274] IEP Power OFF
[ 0.628343] IEP Driver loaded succesfully
[ 0.628462] Module initialized.
[ 0.628734] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[ 0.628951] rk-vcodec ff650000.vpu_service: probe device
[ 0.629139] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[ 0.629651] rk-vcodec ff650000.vpu_service: could not find power_model node
[ 0.629667] rk-vcodec ff650000.vpu_service: init success
[ 0.629867] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[ 0.630303] rk-vcodec ff660000.rkvdec: probe device
[ 0.630467] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[ 0.630847] rk-vcodec ff660000.rkvdec: could not find power_model node
[ 0.630859] rk-vcodec ff660000.rkvdec: init success
[ 0.632532] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.632549] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.633916] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.633934] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.635813] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
[ 0.636377] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
[ 0.636818] [drm] Initialized drm 1.1.0 20060810
[ 0.640510] [drm] Rockchip DRM driver version: v1.0.0
[ 0.642836] mali ff9a0000.gpu: Failed to get regulator
[ 0.642853] mali ff9a0000.gpu: Power control initialization failed
[ 0.643149] Unable to detect cache hierarchy for CPU 0
[ 0.651229] brd: module loaded
[ 0.656313] loop: module loaded
[ 0.656838] zram: Added device: zram0
[ 0.657559] Loading dl1825 driver
[ 0.657794] SCSI Media Changer driver v0.25
[ 0.658678] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
[ 0.658697] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
[ 0.658707] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[ 0.659533] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max
[ 0.829880] wk2xxx_probe() GENA = 0xFF
[ 0.829893] spi driver error!!!!
[ 0.829920] wk2xxxspi: probe of spi32766.0 failed with error 1
[ 0.829948] register spi return v = :0
[ 0.830023] register firefly_spi_init spi return v = :0
[ 0.830080] tun: Universal TUN/TAP device driver, 1.6
[ 0.830087] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.831013] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[ 0.831107] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.831124] rk_gmac-dwmac fe300000.ethernet: TX delay(0x2b).
[ 0.831135] rk_gmac-dwmac fe300000.ethernet: RX delay(0x23).
[ 0.831164] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 0.831330] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[ 0.831339] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.836354] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.836482] stmmac - user ID: 0x10, Synopsys ID: 0x35
[ 0.836493] Ring mode enabled
[ 0.836500] DMA HW capability register supported
[ 0.836507] Normal descriptors
[ 0.836517] RX Checksum Offload Engine supported (type 2)
[ 0.836523] Wake-Up On Lan supported
[ 0.836562] Enable RX Mitigation via HW Watchdog Timer
[ 0.904996] libphy: stmmac: probed
[ 0.905038] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[ 0.905048] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[ 0.906008] PPP generic driver version 2.4.2
[ 0.906273] PPP BSD Compression module registered
[ 0.906334] PPP Deflate Compression module registered
[ 0.906375] PPP MPPE Compression module registered
[ 0.906431] NET: Registered protocol family 24
[ 0.906502] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 0.906511] CSLIP: code copyright 1989 Regents of the University of California.
[ 0.906651] usbcore: registered new interface driver mt7601u
[ 0.906696] Rockchip WiFi SYS interface (V1.00) ...
[ 0.906799] usbcore: registered new interface driver catc
[ 0.906859] usbcore: registered new interface driver kaweth
[ 0.906899] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[ 0.906950] usbcore: registered new interface driver pegasus
[ 0.907012] usbcore: registered new interface driver rtl8150
[ 0.907075] usbcore: registered new interface driver r8152
[ 0.907114] hso: drivers/net/usb/hso.c: Option Wireless
[ 0.907192] usbcore: registered new interface driver hso
[ 0.907258] usbcore: registered new interface driver asix
[ 0.907316] usbcore: registered new interface driver ax88179_178a
[ 0.907400] usbcore: registered new interface driver cdc_ether
[ 0.907457] usbcore: registered new interface driver cdc_eem
[ 0.907519] usbcore: registered new interface driver dm9601
[ 0.907610] usbcore: registered new interface driver smsc75xx
[ 0.907679] usbcore: registered new interface driver smsc95xx
[ 0.907743] usbcore: registered new interface driver gl620a
[ 0.907823] usbcore: registered new interface driver net1080
[ 0.907880] usbcore: registered new interface driver plusb
[ 0.907945] usbcore: registered new interface driver rndis_host
[ 0.908025] usbcore: registered new interface driver cdc_subset
[ 0.908085] usbcore: registered new interface driver zaurus
[ 0.908146] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[ 0.908228] usbcore: registered new interface driver int51x1
[ 0.908306] usbcore: registered new interface driver kalmia
[ 0.908364] usbcore: registered new interface driver ipheth
[ 0.908424] usbcore: registered new interface driver sierra_net
[ 0.908507] usbcore: registered new interface driver cx82310_eth
[ 0.908574] usbcore: registered new interface driver cdc_ncm
[ 0.908634] usbcore: registered new interface driver qmi_wwan
[ 0.908714] usbcore: registered new interface driver cdc_mbim
[ 0.910826] rockchip-dwc3 usb@fe800000: failed to get drvdata dwc3
[ 0.915767] rockchip-dwc3 usb@fe900000: fail to get drvdata hcd
[ 0.916968] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.916989] ehci-pci: EHCI PCI platform driver
[ 0.917053] ehci-platform: EHCI generic platform driver
[ 0.920885] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 0.921102] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[ 0.921287] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[ 0.929034] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 0.929254] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.929279] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.929293] usb usb1: Product: EHCI Host Controller
[ 0.929306] usb usb1: Manufacturer: Linux 4.4.126 ehci_hcd
[ 0.929318] usb usb1: SerialNumber: fe3c0000.usb
[ 0.930008] hub 1-0:1.0: USB hub found
[ 0.930060] hub 1-0:1.0: 1 port detected
[ 0.931023] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.931076] ohci-platform: OHCI generic platform driver
[ 0.931747] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 0.931970] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[ 0.932185] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[ 0.986489] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.986525] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.986535] usb usb2: Product: Generic Platform OHCI controller
[ 0.986545] usb usb2: Manufacturer: Linux 4.4.126 ohci_hcd
[ 0.986555] usb usb2: SerialNumber: fe3e0000.usb
[ 0.987235] hub 2-0:1.0: USB hub found
[ 0.987362] hub 2-0:1.0: 1 port detected
[ 0.989174] usbcore: registered new interface driver cdc_acm
[ 0.989194] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.989282] usbcore: registered new interface driver usblp
[ 0.989355] usbcore: registered new interface driver cdc_wdm
[ 0.989424] usbcore: registered new interface driver uas
[ 0.989531] usbcore: registered new interface driver usb-storage
[ 0.989596] usbcore: registered new interface driver ums-alauda
[ 0.989657] usbcore: registered new interface driver ums-cypress
[ 0.989720] usbcore: registered new interface driver ums-datafab
[ 0.989785] usbcore: registered new interface driver ums_eneub6250
[ 0.989840] usbcore: registered new interface driver ums-freecom
[ 0.989897] usbcore: registered new interface driver ums-isd200
[ 0.989957] usbcore: registered new interface driver ums-jumpshot
[ 0.990019] usbcore: registered new interface driver ums-karma
[ 0.990075] usbcore: registered new interface driver ums-onetouch
[ 0.990140] usbcore: registered new interface driver ums-sddr09
[ 0.990199] usbcore: registered new interface driver ums-sddr55
[ 0.990255] usbcore: registered new interface driver ums-usbat
[ 0.990373] usbcore: registered new interface driver usbserial
[ 0.990433] usbcore: registered new interface driver usbserial_generic
[ 0.990471] usbserial: USB Serial support registered for generic
[ 0.990529] usbcore: registered new interface driver option
[ 0.990569] usbserial: USB Serial support registered for GSM modem (1-port)
[ 0.990737] usbcore: registered new interface driver trancevibrator
[ 0.990764] usb20_otg: version 3.10a 21-DEC-2012
[ 0.991075] usb20_host: version 3.10a 21-DEC-2012
[ 0.991808] usbcore: registered new interface driver xpad
[ 0.991866] usbcore: registered new interface driver usb_acecad
[ 0.991910] usbcore: registered new interface driver aiptek
[ 0.991953] usbcore: registered new interface driver gtco
[ 0.991996] usbcore: registered new interface driver hanwang
[ 0.992040] usbcore: registered new interface driver kbtab
[ 0.992603] .. rk pwm remotectl v1.1 init
[ 0.992836] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[ 0.993287] sensor_register_slave:mma8452,id=17
[ 0.993305] sensor_register_slave:lis3dh,id=7
[ 0.993317] sensor_register_slave:mma7660,id=18
[ 0.993329] sensor_register_slave:lsm303d,id=22
[ 0.993340] sensor_register_slave:gs_mc3230,id=23
[ 0.993347] [Gsensor] gsensor_init
[ 0.993359] sensor_register_slave:mpu6880_acc,id=24
[ 0.993369] sensor_register_slave:mpu6500_acc,id=25
[ 0.993388] sensor_register_slave:lsm330_acc,id=26
[ 0.993399] sensor_register_slave:bma2xx_acc,id=27
[ 0.993411] sensor_register_slave:akm8975,id=30
[ 0.993422] sensor_register_slave:akm8963,id=31
[ 0.993433] sensor_register_slave:l3g4200d,id=45
[ 0.993444] sensor_register_slave:l3g20d,id=46
[ 0.993455] sensor_register_slave:ewtsa,id=47
[ 0.993466] sensor_register_slave:lsm330_gyro,id=51
[ 0.993477] sensor_register_slave:cm3217,id=53
[ 0.993487] sensor_register_slave:cm3218,id=54
[ 0.993499] sensor_register_slave:ls_stk3410,id=62
[ 0.993510] sensor_register_slave:ps_stk3410,id=67
[ 0.994304] i2c /dev entries driver
[ 0.995466] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 0.995551] fan53555-reg: supplied by vcc5v0_sys
[ 0.997934] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 0.997994] fan53555-reg: supplied by vcc5v0_sys
[ 0.999996] rockchip-pinctrl pinctrl: pin gpio1-18 already requested by 0-0040; cannot claim for 0-001b
[ 1.000025] rockchip-pinctrl pinctrl: pin-50 (0-001b) status -22
[ 1.000037] rockchip-pinctrl pinctrl: could not request pin 50 (gpio1-18) from group pmic-dvs2 on device rockchip-pinctrl
[ 1.000046] rk808 0-001b: Error applying setting, reverse things back
[ 1.000453] rk808 0-001b: Pmic Chip id: 0x0
[ 1.003728] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.003806] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.003890] DCDC_REG1: supplied by vcc3v3_sys
[ 1.004628] DCDC_REG2: supplied by vcc3v3_sys
[ 1.005189] DCDC_REG3: supplied by vcc3v3_sys
[ 1.005455] DCDC_REG4: supplied by vcc3v3_sys
[ 1.005928] LDO_REG1: supplied by vcc3v3_sys
[ 1.007046] LDO_REG2: supplied by vcc3v3_sys
[ 1.008032] LDO_REG3: supplied by vcc3v3_sys
[ 1.009042] LDO_REG4: supplied by vcc3v3_sys
[ 1.009876] vcc_sd: Failed to create debugfs directory
[ 1.009979] LDO_REG5: supplied by vcc3v3_sys
[ 1.010967] LDO_REG6: supplied by vcc3v3_sys
[ 1.011939] LDO_REG7: supplied by vcc3v3_sys
[ 1.012933] LDO_REG8: supplied by vcc3v3_sys
[ 1.013925] SWITCH_REG1: supplied by vcc3v3_sys
[ 1.014205] SWITCH_REG2: supplied by vcc3v3_sys
[ 1.014605] firefly_hwversion_in_range 茺{ |
|