| 本帖最后由 晨曦RT 于 2023-5-27 13:51 编辑 自己编译的固件，感觉文件系统加载失败了，一直卡在下面这个地方 [ 13.541559] RKNPU fde40000.npu: pvtm-volt-sel=1 [ 13.542918] RKNPU fde40000.npu: avs=0 [ 13.544063] RKNPU fde40000.npu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0 [ 13.544827] RKNPU fde40000.npu: failed to find power_model node [ 13.545357] RKNPU fde40000.npu: RKNPU: failed to initialize power model [ 13.545944] RKNPU fde40000.npu: RKNPU: failed to get dynamic-coefficient [ 13.549294] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 13.559410] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 13.561296] rockchip-pm rockchip-suspend: not set pwm-regulator-config [ 13.561899] rockchip-suspend not set sleep-mode-config for mem-lite [ 13.562455] rockchip-suspend not set wakeup-config for mem-lite [ 13.562984] rockchip-suspend not set sleep-mode-config for mem-ultra [ 13.563583] rockchip-suspend not set wakeup-config for mem-ultra [ 13.565336] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 413; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '20:36:17', on 'May 26 2023'. [ 13.568508] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2 [ 13.569276] cfg80211: failed to load regulatory.db [ 13.570459] Mali: [ 13.570462] Mali device driver loaded [ 13.571078] rkisp rkisp-vir0: clear unready subdev num: 4 [ 13.571563] rockchip-csi2-dphy0: No link between dphy and sensor [ 13.572782] rockchip-csi2-dphy0: No link between dphy and sensor [ 13.573396] rkisp-vir0: update sensor failed v 13.580062] 而从官司网下载的ROC-RK3568-PC-RTLINUX_Ubuntu20.04-r240_v1.3.2b_230403 固件能正常启动。请教这个是什么原因，需要怎么解决？ 谢谢！！ |
-
-
39.28 KB, 下载次数: 1, 下载积分: 灯泡 -1 , 经验 -1
