AIO-186 TF卡烧录失败

Oliver_Li

安装附加的软件，进行 SD 卡格式化

王渊

Oliver_Li 发表于 2025-3-27 13:40
安装附加的软件，进行 SD 卡格式化

请问使用什么软件，没有看到有附件，我使用傲梅分区助手进行全写0完成低级格式化

Oliver_Li

链接: https://pan.baidu.com/s/1bygrvd__Gm64EVwKga92Tw?pwd=1234 提取码: 1234
--来自百度网盘超级会员v9的分享

王渊

王渊

Oliver_Li 发表于 2025-3-27 13:46
链接: https://pan.baidu.com/s/1bygrvd__Gm64EVwKga92Tw?pwd=1234 提取码: 1234
--来自百度网盘超级会员 ...

与傲梅分区助手格式化后结果相同。
再次提醒，我格式化的卡使用自己编的包能正常烧录，贵司百度云提供的包无法烧录
请确认贵司提供的包是否正常或确认是否需要执行切换dts type等指令

Oliver_Li

给我看看，插卡上电的时候，系统打印的第一段日志

王渊

Oliver_Li 发表于 2025-3-27 14:44
给我看看，插卡上电的时候，系统打印的第一段日志

请看错误日志

1. 
   
2. sophon#
   
3. sophon# B.R.SCS/0/0.WD.URPL.SDI/25000000/6000000.BS/SD.PS.SD/0x0/0x1000/0x1000/0.PE.BS.SD/0x1000/0x16800/0x16800/0.BE.J.
   
4. FSBL Jb2869:g8d5c732-dirty:2024-07-17T09:52:18+08:00
   
5. 
   
6. SRAM Log: ========================================
   
7. I:PCIE: mode 0
   
8. I:next_xlat 1, MAX_XLAT_TABLES 6
   
9. I:next_xlat 2, MAX_XLAT_TABLES 6
   
10. I:next_xlat 3, MAX_XLAT_TABLES 6
    
11. I:next_xlat 4, MAX_XLAT_TABLES 6
    
12. I:V/4ccb2a2f/vueTPvX:g1b2c9ab2/0/29400000.
    
13. SCS/0/0. I:ep_swinfo.
    
14. I:sw_info=0x0
    
15. I:EP:0x33050224/0x0.
    
16. I:EP:0x3305022c/0x0.
    
17. I:EP:0x33050234/0x294106bd.
    
18. I:EP:0x3305023c/0x294106b9.
    
19. I:EP:0x33050244/0x294106b5.
    
20. I:EP:0x3305024c/0x294106b1.
    
21. I:EP:0x33050254/0x294106ad.
    
22. I:EP:0x3305025c/0x294106a9.
    
23. I:EP:0x33050264/0x294106a5.
    
24. I:EP:0x3305026c/0x29406205.
    
25. I:EP:0x33050274/0x2940a8c9.
    
26. I:ep_dev.
    
27. I:EP:0x33050224/0x0.
    
28. I:EP:0x3305022c/0x0.
    
29. I:EP:0x33050234/0x294106bd.
    
30. I:EP:0x3305023c/0x294106b9.
    
31. I:EP:0x33050244/0x294106b5.
    
32. I:EP:0x3305024c/0x294106b1.
    
33. I:EP:0x33050254/0x294106ad.
    
34. I:EP:0x3305025c/0x294106a9.
    
35. I:EP:0x33050264/0x294106a5.
    
36. I:EP:0x3305026c/0x29406205.
    
37. I:EP:0x33050274/0x2940a8c9.
    
38. WD.URPL. I:bm_sd_phy_init
    
39. I:ep_dev.
    
40. I:EP:0x33050224/0x0.
    
41. I:EP:0x3305022c/0x0.
    
42. I:EP:0x33050234/0x294106bd.
    
43. I:EP:0x3305023c/0x294106b9.
    
44. I:EP:0x33050244/0x294106b5.
    
45. I:EP:0x3305024c/0x294106b1.
    
46. I:EP:0x33050254/0x294106ad.
    
47. I:EP:0x3305025c/0x294106a9.
    
48. I:EP:0x33050264/0x294106a5.
    
49. I:EP:0x3305026c/0x29406205.
    
50. I:EP:0x33050274/0x2940a8c9.
    
51. SDI/25000000/6000000. I:Set SDCLK by driver. (Source, Target, div, Actual) = (25000000, 200000, 63, 198412)
    
52. I:SD init done
    
53. I:cid manufacturer_id:0x3 card_bga:0x3 name:?G23KSDS
    
54. I:sd_rca:43690
    
55. I:csd spec_vers:0x0 erase_grp_size:0x1f
    
56. I:Set SDCLK by driver. (Source, Target, div, Actual) = (25000000, 6000000, 3, 4166666)
    
57. I:sd_open_fip
    
58. I:BS/cea0.
    
59. BS/SD.PS. I:LIS/0xcea0/0x25039000/0x0/4096/0.
    
60. SD/0x0/0x1000/0x1000/0. I:LIE/0/0x25039000/0x0/4096.
    
61. PE. I:CS/0x5200200/0x0/0x20f00008.
    
62. I:No BLCP.
    
63. BS. I:LIS/0xcea0/0x25000000/0x1000/92160/0.
    
64. SD/0x1000/0x16800/0x16800/0. I:LIE/0/0x25000000/0x1000/92160.
    
65. BE. I:bl2_entry=0x25000020
    
66. J.
    
67. SRAM Log end: ====================================
    
68. st_on_reason=2d0000
    
69. st_off_reason=0
    
70. P2S/0x1000/0x25018800.
    
71. SD/0x17800/0x1000/0x1000/0.P2E.
    
72. D-2024-04-28
    
73. Auto: board info: single rank, dual sys, lpddr4, 4266.
    
74. GPIO117 status =========== 0x0
    
75. ============adc3 val: 819, vol: 299 mV=================
    
76. DDR subsys0 init.
    
77. Dram Datarate: 4266Mbps.
    
78. SSC_OFF.
    
79. ZQ CAL.
    
80. DDR BIST PASS
    
81. DDR subsys1 init.
    
82. Dram Datarate: 4266Mbps.
    
83. SSC_OFF.
    
84. ZQ CAL.
    
85. DDR BIST PASS
    
86. Total Dram Size: 4096MBytes
    
87. PLLS.
    
88. PLLE.
    
89. EMI/375000000/12000000.Load OEM info end.
    
90. C2S/0x0/0x0/0x0.
    
91. No C906L image.
    
92. MS/0x1a800/0x100000000/0x8200.
    
93. SD/0x1a800/0x8200/0x8200/0.ME.
    
94. BL32/0x22a00/0x100050000/0x5200.
    
95. SD/0x22a00/0x5200/0x5200/0.ME.
    
96. BL32/0x27c00/0x5200000/0x5000.
    
97. SD/0x27c00/0x5000/0x5000/0.ME.
    
98. L2/0x2cc00.
    
99. SD/0x2cc00/0x200/0x200/0.L2/0x414d3342/0xcafe4bcc/0x1000a0000/0x44e00/0x44e00
    
100. COMP/1.
     
101. SD/0x2cc00/0x44e00/0x44e00/0.DCP/0x1000a0020/0x1000000/0x101100020/0x44e00/1.
     
102. DCP/0x1da018/0.
     
103. Loader_2nd loaded.
     
104. U/100000000/N/1000a0020/
     
105. B100050000-3c000.start BL32
     
106. image_type :1
     
107. 
     
108. 
     
109. U-Boot 2021.10-g35fa8dccda (Oct 09 2024 - 17:18:50 +0800) cvitek_sophgo
     
110. 
     
111. DRAM:  4 GiB
     
112. Relocation Offset is: fb687000
     
113. Relocating to 1fb727000, new gd at 1fa9ffd90, sp at 1fa9f60e0
     
114. WDT:   Started with servicing (30s timeout)
     
115. MMC:   cvi_sdhci_probe-470: mmc0 probe
     
116. cvi_sdhci_probe-470: mmc0 probe
     
117. cvi_sdhci_probe-470: mmc0 probe
     
118. cv-emmc@29300000: 0, cv-sd@29310000: 1, wifi-sd@29330000: 2
     
119. Loading Environment from MMC... *** Warning - bad CRC, using default environment
     
120. 
     
121. In:    serial
     
122. Out:   serial
     
123. Err:   serial
     
124. switch to partitions #2, OK
     
125. mmc0(part 2) is current device
     
126. 
     
127. MMC read: dev # 0, block # 0, count 96 ... 96 blocks read: OK in 2 ms (23.4 MiB/s)
     
128. switch to partitions #2, OK
     
129. mmc0(part 2) is current device
     
130. 
     
131. MMC read: dev # 0, block # 0, count 96 ... 96 blocks read: OK in 2 ms (23.4 MiB/s)
     
132. FORCE INFO: DTS_TYPE[config-bm1688_1688jd4]
     
133. hdmi disconnected
     
134. Net:
     
135. Warning: ethernet@290e0000 (eth0) using random MAC address - 72:4f:26:37:a3:73
     
136. eth0: ethernet@290e0000
     
137. Warning: ethernet@290f0000 (eth1) using random MAC address - 0a:dd:b3:96:48:9b
     
138. , eth1: ethernet@290f0000
     
139. Hit any key to stop autoboot:  0
     
140. ## Resetting to default environment
     
141. fs reading: //boot.scr
     
142. ** Unable to read file //boot.scr **
     
143. Failed to load '//boot.scr'
     
144. ## Executing script at 120000000
     
145. Wrong image format for "source" command
     
146. load from no partition sd
     
147. ** fs_devread read error - block
     
148. Failed to mount ext2 filesystem...
     
149. Can't set block device
     
150. ## Executing script at 120000000
     
151. Wrong image format for "source" command
     
152. fs reading: boot.scr.emmc
     
153. 548 bytes read in 3 ms (177.7 KiB/s)
     
154. ## Executing script at 120000000
     
155. Athena2 boot script
     
156. fs reading: boot.itb
     
157. 18878170 bytes read in 834 ms (21.6 MiB/s)
     
158. ## Loading kernel from FIT Image at 104000000 ...
     
159. Could not find configuration node
     
160. ERROR: can't get kernel image!
     
161. sophon#
     

复制代码