|
|
【Android】
Firefly-RK3288主板烧写官方Android固件起不来
发表于 2018-9-19 10:13:38
浏览：8360
|
回复：3
打印
只看该作者
[复制链接]
楼主
Firefly-RK3288主板烧写官方ubuntu版本固件能够正常启动
但是烧写Android固件起不来，都是卡死在“Starting Kernel ...”固件版本：
Firefly-RK3288_Android5.1_201711211
Firefly-RK3288_Android5.1_201803081517
具体log如下：
U-Boot 2014.10-RK3288-10 (Nov 20 2017 - 17:19:35)
CPU: rk3288
cpu version = 0
CPU's clock information:
arm pll = 600000000HZ
periph pll = 297000000HZ
ddr pll = 200000000HZ
codec pll = 384000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 400
SdmmcInit = 2 0
storage init OK!
Using default environment
GetParam
Load FDT from boot image.
power key: bank-0 pin-5
pmic:act8846
can't find dts node for pwm1
DCDC vdd_logic has been used, pwm regulator not init it.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2017-11-20#2.30
sn: 1006120000000284
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
can't find power_ctr node for lcdc0
pll_src = 1, dclk_hz = 148500000, dclk_div = 2
no fuel gauge found
got recovery cmd from misc.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x02000000 (0x006a53b8)
ramdisk @ 0x05bf0000 (0x002ad17c)
bootrk: do_bootm_linux...
Loading Device Tree to 05600000, end 0561c524 ... OK
Add bank:0000000000000000, 0000000080000000
Starting kernel ... |
|
