Firefly开源社区

打印 上一主题 下一主题

Android系统selinux 安全问题

64

积分

0

威望

0

贡献

技术小白

积分
64
QQ

Android系统selinux 安全问题

发表于 2020-2-10 15:40:23      浏览:6349 | 回复:2        打印      只看该作者   [复制链接] 楼主
系统从默认permissive安全级别修改为enforcing,enforcing模式下无法启动,selinux权限已经添加完毕,串口log中无权限问题提示,对比了两种模式下的串口log ,区别在在main函数之后,log如下,有经验的各路朋友一起分析一下
[16:42:53.830] [   51.506588] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
[16:42:22.346]
[18:23:01.746] [  114.991521] binder_alloc: 567: binder_alloc_buf, no vma
[18:23:01.746] [  114.991612] binder: 240:302 transaction failed 29189/-3, size 68-0 line 3071
[18:23:01.756] [  115.201073] init: Service 'zygote' (pid 248) killed by signal 9
[18:23:01.957] [  115.201140] init: Service 'zygote' (pid 248) killing any children in process group
[18:23:01.957] [  115.201327] init: write_file: Unable to open '/sys/android_power/request_state': No such file or directory
[18:23:01.957] [  115.201462] init: write_file: Unable to write to '/sys/power/state': Invalid argument
[18:23:01.966] [  115.201595] init: Service 'audioserver' is being killed...
[18:23:01.966] [  115.201847] init: Service 'cameraserver' is being killed...
[18:23:01.966] [  115.201992] init: Service 'media' is being killed...
[18:23:01.966] [  115.202120] init: Service 'netd' is being killed...
[18:23:01.966] [  115.204022] init: Starting service 'zygote'...
[18:23:01.966] [  115.206625] init: Service 'cameraserver' (pid 251) killed by signal 9
[18:23:01.966] [  115.206690] init: Service 'cameraserver' (pid 251) killing any children in process group
[18:23:01.966] [  115.207371] init: Starting service 'cameraserver'...
[18:23:01.966] [  115.211130] init: couldn't write 898 to /dev/cpuset/camera-daemon/tasks: No such file or directory
[18:23:01.966] [  115.211466] init: Service 'audioserver' (pid 250) killed by signal 9
[18:23:01.966] [  115.211610] init: Service 'audioserver' (pid 250) killing any children in process group
[18:23:01.966] [  115.212473] init: Service 'netd' (pid 259) killed by signal 9
[18:23:01.966] [  115.212552] init: Service 'netd' (pid 259) killing any children in process group
[18:23:01.975] [  115.213352] init: Service 'media' (pid 258) killed by signal 9
[18:23:01.975] [  115.213424] init: Service 'media' (pid 258) killing any children in process group
[18:23:01.975] [  115.214381] init: Starting service 'audioserver'...
[18:23:01.975] [  115.215738] init: Starting service 'media'...
[18:23:01.975] [  115.216640] init: Starting service 'netd'...
[18:23:01.975] [  115.460413] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[18:23:02.217] [  115.460506] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[18:23:02.217] [  115.470333] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp
[18:23:02.237] [  115.470345] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22
[18:23:02.237] [  115.470353] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl
[18:23:02.237] [  115.470358] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back
[18:23:02.237] [  115.470363] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[18:23:02.237] [  115.481056] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[18:23:02.237] [  115.481146] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[18:23:02.248]
[18:23:02.260] [  115.504345] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[18:23:02.260] [  115.504432] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[18:23:02.260] [  115.516332] rockchip-pinctrl pinctrl: pin gpio2-11 already requested by ff910000.isp; cannot claim for ff920000.isp
[18:23:02.285] [  115.516345] rockchip-pinctrl pinctrl: pin-75 (ff920000.isp) status -22
[18:23:02.285] [  115.516352] rockchip-pinctrl pinctrl: could not request pin 75 (gpio2-11) from group cif-clkout  on device rockchip-pinctrl
[18:23:02.285] [  115.516358] RockChip-CamSys ff920000.isp: Error applying setting, reverse things back
[18:23:02.285] [  115.516363] E:camsys_mrv_iomux_cb(126): pinctrl_select_state failed!
[18:23:02.285] [  115.529072] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
[18:23:02.285] [  115.529157] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[18:23:02.285] [  115.609883] E:camsys_i2c_write(84): i2c write dev(addr:0x20) failed!,err = -6
[18:23:02.366] [  115.609988] E:camsys_i2c_write(84): i2c write dev(addr:0x6c) failed!,err = -6
回复

使用道具 举报

64

积分

0

威望

0

贡献

技术小白

积分
64
QQ
发表于 2020-2-10 15:42:43        只看该作者  沙发
log中有i2c的错误信息,我不用i2c,在permissive模式下有相同的log
回复

使用道具 举报

64

积分

0

威望

0

贡献

技术小白

积分
64
QQ
发表于 2020-2-18 18:14:35        只看该作者  板凳
该问题已解决,根据串口log 无法定位问题,可根据kernel . logcat日志进行进一步增加权限。
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表