|
【技术讨论】
RK3308B 系统编译问题
发表于 2021-1-7 18:19:52
浏览:7786
|
回复:3
打印
只看该作者
[复制链接]
楼主
本帖最后由 jx__0570 于 2021-1-7 19:10 编辑
编译时 限显示Can't found build config, please check again 找不到mk文件
user@user-virtual-machine:/home/rk3308/Firefly-RK3308$ ./build.sh roc-rk3308b-cc-plus_release_BoardConfig.mk
Can't found build config, please check again
====USAGE: build.sh modules====
uboot -build uboot
kernel -build kernel
modules -build kernel modules
rootfs -build default rootfs, currently build buildroot as default
buildroot -build buildroot rootfs
ramboot -build ramboot image
yocto -build yocto rootfs, currently build ros as default
ros -build ros rootfs
debian -build debian rootfs
pcba -build pcba
recovery -build recovery
all -build uboot, kernel, rootfs, recovery image
cleanall -clean uboot, kernel, rootfs, recovery
firmware -pack all the image we need to boot up system
updateimg -pack update image
otapackage -pack ab update otapackage image
save -save images, patches, commands used to debug
default -build all modules
user@user-virtual-machine:/home/rk3308/Firefly-RK3308$ ./build.sh ../Firefly-RK3308/device/rockchip/rk3308/roc-rk3308
roc-rk3308b-cc_release_BoardConfig.mk roc-rk3308-cc_release_BoardConfig.mk
device里面也没有开发板cc plus 的config文件
device/rockchip/rk3308/roc-rk3308b-cc_release_BoardConfig.mk
我只找到了 这个mk文件
|
|