Linux 如何移植支持xcb和webengine的QT 5.15.2

HupeSun

想要往Ubuntu系统上移植指定版本的QT，在QT官网下载源码后configure如下：

1. #~/bin/bash
   
2. ./configure \
   
3.         -v \
   
4.         -sysroot /home/matinal/workstation/rk-source/rk3399-linux/other/ubuntu/binary \
   
5.         -extprefix /opt/Qt5.15.2-armhf  \
   
6.         -hostprefix /opt/Qt5.15.2-armhf-host \
   
7.         -xplatform linux-arm-gnueabihf-g++ \
   
8.         -opensource \
   
9.         -confirm-license \
   
10.         -shared \
    
11.         -pkg-config \
    
12.         -strip \
    
13.         -xcb-xlib \
    
14.         -xcb \
    
15.         -make libs \
    
16.         -make tools \
    
17.         -widgets \
    
18.         -no-opengl \
    
19.         -skip qtlocation \
    
20.         -nomake examples

复制代码

配置会报错：

1. 
   
2. Note: No wayland-egl support detected. Cross-toolkit compatibility disabled.
   
3. 
   
4. Note: The following modules are not being compiled in this configuration:
   
5.     3dcore
   
6.     3drender
   
7.     webenginecore
   
8.     webengine
   
9.     webenginewidgets
   
10.     pdf
    
11.     pdfwidgets
    
12. 
    
13. WARNING: A pkg-config support is required to build QtWebEngine.
    
14. 
    
15. WARNING: A pkg-config support is required to build QtPdf.
    
16. 
    
17. WARNING: QtWebEngine will not be built.
    
18. 
    
19. WARNING: QtPdf will not be built.
    
20. 
    
21. ERROR: Feature 'pkg-config' was enabled, but the pre-condition 'tests.pkg-config' failed.
    
22. 
    
23. ERROR: Feature 'xcb' was enabled, but the pre-condition 'features.thread && libs.xcb && tests.xcb_syslibs && features.xkbcommon-x11' failed.
    
24. 
    
25. ERROR: Feature 'xcb-xlib' was enabled, but the pre-condition 'features.xlib && libs.xcb_xlib' failed.
    

复制代码

已经按照

https://wiki.qt.io/Building_Qt_5_from_Git

安装了所有提到的依赖，求问是什么问题导致的这个报错。。。

wangapei

这个论坛没有技术支持么