|
|
rk3288-reload如何制作linux根文件系统？
发表于 2016-8-4 16:03:28
浏览：6434
|
回复：2
打印
只看该作者
[复制链接]
楼主
按照wiki上的教程，刷了个官方的Android固件，然后把miniroot和misc刷进recovery和misc分区，重启后串口不断打印信息如下：
DDR Version 1.00 20150318
In
SRX
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
OUT
U-Boot 2014.10-RK3288-10-g65679f1 (Jul 20 2015 - 10:28:11)
CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 300000000HZ
ddr pll = 200000000HZ
codec pll = 594000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
remotectl v0.1
storage init OK!
Using default environment
GetParam
check parameter success
failed to prepare fdt from boot!
power key: bank-0 pin-5
can't find dts node for ricoh619
pmic:act8846
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2015-07-20#2.19
empty serial no.
checkKey
vbus = 0
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
checkKey
vbus = 0
board_fbt_key_pressed: ir_keycode = 0x0, frt = 0
got recovery cmd from misc.
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel @ 0x02000000 (0x0060b2a0)
ramdisk @ 0x05bf0000 (0x00199964)
bootrk: do_bootm_linux...
Loading Device Tree to 05600000, end 0561b5ad ... OK
Add bank:0000000000000000, 0000000080000000
Starting kernel ...
一直不断重复，根本无法进入miniroot，这个教程是不是针对rk3288的，不适用用reload板？ |
|
