关于根据wiki教程更换为Ubuntu系统不成功

蝈蝈

根据官方的wiki教程更改Ubuntu系统
1.创建目录并且解压镜像




2. 添加镜像路径


3. 打包，打包后烧录发现无法正常启动系统，报错如log日志

Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
mount: mounting /dev/mmcblk0p7 on /root failed: Invalid argument
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Warning: overlayroot: configuring overlayroot with driver=overlay mode=device opts='dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' per kernel cmdline
[    5.190864] EXT4-fs (mmcblk0p8): recovery complete
[    5.191584] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
mount: mounting /root on /root-ro failed: Invalid argument
Failure: overlayroot: failed to move root away from /root to /root-ro
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
Warning: Something odd, no /lib/modules/4.4.194+ in initramfs.
done.
mount: mounting /run on /root/run failed: No such file or directory
run-init: current directory on the same filesystem as the root: error 0
Target filesystem doesn't have requested /sbin/init.
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
No init found. Try passing init= bootarg.


BusyBox v1.27.2 (Ubuntu 1:1.27.2-2ubuntu3.2) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) [    8.148440] random: nonblocking pool is initialized

895816513

看下打包的日志

蝈蝈

895816513 发表于 2022-6-24 15:49
看下打包的日志

Error reading from serial device

──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────

Session stopped
    - Press <return> to exit tab
    - Press R to restart session
    - Press S to save terminal output to file

──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────

Session stopped
    - Press <return> to exit tab
    - Press R to restart session
    - Press S to save terminal output to file
▒▒▒▒▒▒▒▒~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~DDR Version 1.26 20210628
In
#▒`▒
▒8<0
&▒`h▒@
▒>▒a
~▒▒0p▒▒|@▒0▒`a▒b`▒▒▒`▒
`x▒4(▒▒x▒08G▒ 0Cp4tx`▒▒F8x@f▒▒
3▒0x
▒@@< @▒▒x▒@▒
            O=pt▒▒
                  z▒^▒
                      x▒▒▒<0▒d
Os▒0x▒
      P>8▒O▒<>
              ▒R▒>xxz
p▒0x▒                ▒▒>x▒l{▒x▒l▒@x▒=▒x▒:▒>4@
z=▒=0x▒F
        ▒jF<▒x▒z▒@2=▒2

z▒`4082

▒▒x▒:▒N?▒
         x
z▒▒10x▒x▒o=^▒^▒▒▒R0=0x18
z▒4=0x2
@z▒4<0x▒F

▒R8=0x8
▒R12=0x02
z▒140x72
▒z▒080x0
▒R09<0x0
z▒24=0x8
@z▒25=0x0
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 0, cs 1, advanced training done
channel 1, cs 0, advanced training done
channel 1, cs 1, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 346
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 68140
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             boot, start:0xa000, size:0x20000
GPT part:  4, name:         recovery, start:0x2a000, size:0x20000
GPT part:  5, name:           backup, start:0x4a000, size:0x10000
GPT part:  6, name:           rootfs, start:0x5a000, size:0x600000
GPT part:  7, name:         userdata, start:0x65a000, size:0x33effdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xe70b0
RunBL31 0x40000 @ 109214 us
NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-278-gef70f120a #zhangzj #9 Fri Sep 17 09:39:24 UTC 2021 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-g948c63a14e #zhang (Jun 23 2022 - 23:17:27 -0700)

Model: Firefly-RK3399 Board
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset: f5bdd000, fdt: f3dd14d8
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 50Mhz
PartType: EFI
boot mode: None
Found DTB in boot part
DTB: rk-kernel.dtb
HASH(c): OK
Android header version 0
I2c0 speed: 400000Hz
PMIC:  RK808
vdd_center 900000 uV
vdd_cpu_l 825000 uV
vdd_log 1100000 uV
In:    serial
Out:   serial
Err:   serial
Model: AIO-3399J Board (Linux Opensource)
Rockchip UBOOT DRM driver version: v1.0.1
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
Could not find baseparameter partition
mode:1920x1080
Detailed mode clock 148500 kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
CEA mode used vic=16
final pixclk = 148500000 tmdsclk = 148500000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 816000 KHz
  dpll 856000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 148000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "(none)"
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 23035 KiB
RAM disk load addr 0x0a200000 size 8657 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831c6fa
No file: logo_kernel.bmp
logo_bmp uncompressed size=127818
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0xf8000000 (size: 0xede00000)
Total: 3186.230 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.194+ (zhang@ubuntu) (firefly: 2c8b0d223c45454b8f8c0dc5cfd6bf2816a0a606) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #3 SMP Thu Jun 23 23:17:57 PDT 2022
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ecb000 s46056 r8192 d31768 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 991752
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.slot_suffix= androidboot.serialno=f48ee822a24c6f9f  ro rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xf7e83000-0xf7ec3000] (0MB)
[    0.000000] Memory: 3923388K/4030464K available (14462K kernel code, 1786K rwdata, 5504K rodata, 1216K init, 765K bss, 107076K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009410000 - 0xffffff8009540000   (  1216 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008ea0000   ( 14464 KB)
[    0.000000]     .rodata : 0xffffff8008ea0000 - 0xffffff8009410000   (  5568 KB)
[    0.000000]       .data : 0xffffff8009540000 - 0xffffff80096fe808   (  1787 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @f2d00000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f2c90000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f2ca0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002199] Console: colour dummy device 80x25
[    0.002639] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003625] pid_max: default: 32768 minimum: 301
[    0.004152] Security Framework initialized
[    0.004615] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005254] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006689] Initializing cgroup subsys io
[    0.007096] Initializing cgroup subsys memory
[    0.007537] Initializing cgroup subsys devices
[    0.007968] Initializing cgroup subsys freezer
[    0.008409] Initializing cgroup subsys net_cls
[    0.008838] Initializing cgroup subsys perf_event
[    0.009293] Initializing cgroup subsys net_prio
[    0.009745] Initializing cgroup subsys hugetlb
[    0.010172] Initializing cgroup subsys pids
[    0.010589] ftrace: allocating 51841 entries in 203 pages
[    0.134306] sched-energy: Sched-energy-costs installed from DT
[    0.134871] CPU0: update cpu_capacity 401
[    0.135309] ASID allocator initialised with 32768 entries
[    0.139038] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.140377] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.142665] Detected VIPT I-cache on CPU1
[    0.142700] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.142730] CPU1: using LPI pending table @0x00000000f2f50000
[    0.142783] CPU1: update cpu_capacity 401
[    0.142787] CPU1: Booted secondary processor [410fd034]
[    0.143578] Detected VIPT I-cache on CPU2
[    0.143609] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.143639] CPU2: using LPI pending table @0x00000000f2f80000
[    0.143688] CPU2: update cpu_capacity 401
[    0.143691] CPU2: Booted secondary processor [410fd034]
[    0.144441] Detected VIPT I-cache on CPU3
[    0.144471] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.144500] CPU3: using LPI pending table @0x00000000f2fd0000
[    0.144549] CPU3: update cpu_capacity 401
[    0.144553] CPU3: Booted secondary processor [410fd034]
[    0.145341] Detected PIPT I-cache on CPU4
[    0.145366] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.145400] CPU4: using LPI pending table @0x00000000f2410000
[    0.145434] CPU4: update cpu_capacity 1024
[    0.145438] CPU4: Booted secondary processor [410fd082]
[    0.146108] Detected PIPT I-cache on CPU5
[    0.146132] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.146168] CPU5: using LPI pending table @0x00000000f2440000
[    0.146202] CPU5: update cpu_capacity 1024
[    0.146205] CPU5: Booted secondary processor [410fd082]
[    0.146299] Brought up 6 CPUs
[    0.158649] SMP: Total of 6 processors activated.
[    0.159099] CPU features: detected feature: GIC system register CPU interface
[    0.159787] CPU features: detected feature: 32-bit EL0 Support
[    0.160346] CPU: All CPU(s) started at EL2
[    0.160774] alternatives: patching kernel code
[    0.162561] devtmpfs: initialized
[    0.188395] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.189351] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.190325] xor: measuring software checksum speed
[    0.200759]    8regs     :  2856.000 MB/sec
[    0.210813]    8regs_prefetch:  2564.000 MB/sec
[    0.220867]    32regs    :  3208.000 MB/sec
[    0.230922]    32regs_prefetch:  2848.000 MB/sec
[    0.231371] xor: using function: 32regs (3208.000 MB/sec)
[    0.231900] pinctrl core: initialized pinctrl subsystem
[    0.234066] Failed to find legacy iommu devices
[    0.234874] NET: Registered protocol family 16
[    0.240524] cpuidle: using governor ladder
[    0.244531] cpuidle: using governor menu
[    0.244923] Registered FIQ tty driver
[    0.245802] vdso: 2 pages (1 code @ ffffff8008ea6000, 1 data @ ffffff8009544000)
[    0.246527] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.247607] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.272035] console [pstore-1] enabled
[    0.272398] pstore: Registered ramoops as persistent store backend
[    0.272998] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.275989] console [ttyFIQ0] enabled
[    0.275989] console [ttyFIQ0] enabled
[    0.276680] bootconsole [uart0] disabled
[    0.276680] bootconsole [uart0] disabled
[    0.277614] Registered fiq debugger ttyFIQ0
[    0.328502] raid6: int64x1  gen()   468 MB/s
[    0.345580] raid6: int64x1  xor()   429 MB/s
[    0.362681] raid6: int64x2  gen()   675 MB/s
[    0.379765] raid6: int64x2  xor()   599 MB/s
[    0.396857] raid6: int64x4  gen()   976 MB/s
[    0.413963] raid6: int64x4  xor()   677 MB/s
[    0.431041] raid6: int64x8  gen()   789 MB/s
[    0.448138] raid6: int64x8  xor()   634 MB/s
[    0.465262] raid6: neonx1   gen()   968 MB/s
[    0.482308] raid6: neonx1   xor()   681 MB/s
[    0.499437] raid6: neonx2   gen()  1277 MB/s
[    0.516512] raid6: neonx2   xor()   964 MB/s
[    0.533597] raid6: neonx4   gen()  1734 MB/s
[    0.550691] raid6: neonx4   xor()  1177 MB/s
[    0.567783] raid6: neonx8   gen()  1691 MB/s
[    0.584875] raid6: neonx8   xor()  1250 MB/s
[    0.585259] raid6: using algorithm neonx4 gen() 1734 MB/s
[    0.585741] raid6: .... xor() 1177 MB/s, rmw enabled
[    0.586183] raid6: using intx1 recovery algorithm
[    0.591146] iommu: Adding device ff650000.vpu_service to group 0
[    0.591763] iommu: Adding device ff660000.rkvdec to group 1
[    0.592378] iommu: Adding device ff8f0000.vop to group 2
[    0.592939] iommu: Adding device ff900000.vop to group 3
[    0.593509] iommu: Adding device ff910000.rkisp1 to group 4
[    0.594094] iommu: Adding device ff920000.rkisp1 to group 5
[    0.595072] rk_iommu ff650800.iommu: can't get sclk
[    0.595763] rk_iommu ff660480.iommu: can't get sclk
[    0.596390] rk_iommu ff8f3f00.iommu: can't get sclk
[    0.596990] rk_iommu ff903f00.iommu: can't get sclk
[    0.597576] rk_iommu ff914000.iommu: can't get sclk
[    0.598181] rk_iommu ff924000.iommu: can't get sclk
[    0.598952] SCSI subsystem initialized
[    0.599626] usbcore: registered new interface driver usbfs
[    0.600152] usbcore: registered new interface driver hub
[    0.600718] usbcore: registered new device driver usb
[    0.601238] media: Linux media interface: v0.10
[    0.601692] Linux video capture interface: v2.00
[    0.602179] pps_core: LinuxPPS API ver. 1 registered
[    0.602622] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.603452] PTP clock support registered
[    0.604932] Advanced Linux Sound Architecture Driver Initialized.
[    0.605992] Bluetooth: Core ver 2.21
[    0.606336] NET: Registered protocol family 31
[    0.606742] Bluetooth: HCI device and connection manager initialized
[    0.607316] Bluetooth: HCI socket layer initialized
[    0.607758] Bluetooth: L2CAP socket layer initialized
[    0.608244] Bluetooth: SCO socket layer initialized
[    0.609034] NetLabel: Initializing
[    0.609340] NetLabel:  domain hash size = 128
[    0.609725] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.610208] NetLabel:  unlabeled traffic allowed by default
[    0.610848] nfc: nfc_init: NFC Core ver 0.1
[    0.611266] NET: Registered protocol family 39
[    0.611771] rockchip-cpuinfo cpuinfo: Serial         : f48ee822a24c6f9f
[    0.613120] clocksource: Switched to clocksource arch_sys_counter
[    0.665918] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.666855] NET: Registered protocol family 2
[    0.667689] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.668597] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.670109] TCP: Hash tables configured (established 32768 bind 32768)
[    0.670829] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.671549] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.672481] NET: Registered protocol family 1
[    0.673160] RPC: Registered named UNIX socket transport module.
[    0.673684] RPC: Registered udp transport module.
[    0.674103] RPC: Registered tcp transport module.
[    0.674532] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.675770] Trying to unpack rootfs image as initramfs...
[    1.093972] Freeing initrd memory: 8656K
[    1.095047] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.095872] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.097950] kvm [1]: 8-bit VMID
[    1.098248] kvm [1]: Hyp mode initialized successfully
[    1.098816] kvm [1]: interrupt-controller@fff20000 IRQ10
[    1.099494] kvm [1]: timer IRQ12
[    1.102657] audit: initializing netlink subsys (disabled)
[    1.103193] audit: type=2000 audit(1.013:1): initialized
[    1.104067] Initialise system trusted keyring
[    1.104816] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.113725] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.115211] NFS: Registering the id_resolver key type
[    1.115682] Key type id_resolver registered
[    1.116057] Key type id_legacy registered
[    1.116446] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.117759] ntfs: driver 2.1.32 [Flags: R/O].
[    1.118543] fuse init (API version 7.23)
[    1.119264] SGI XFS with security attributes, no debug enabled
[    1.125238] NET: Registered protocol family 38
[    1.125662] Key type asymmetric registered
[    1.126032] Asymmetric key parser 'x509' registered
[    1.126647] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.127445] io scheduler noop registered
[    1.127801] io scheduler deadline registered
[    1.128236] io scheduler cfq registered (default)
[    1.130182] phy phy-ff770000.syscon:usb2-phy@e450.1: Failed to get VBUS supply regulator
[    1.131811] phy phy-ff770000.syscon:usb2-phy@e460.3: Failed to get VBUS supply regulator
[    1.137264] ace test_init function.
[    1.137747] ace test_init end.ret=0
[    1.138447] radar end.ret=0
[    1.141208] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.141804] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.142413] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.142972] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.143590] PCI host bridge /pcie@f8000000 ranges:
[    1.144035]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.144505]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    1.686172] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.686787] rockchip-pcie f8000000.pcie: deferred probe failed
[    1.687567] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    1.689057] Module initialized.
[    1.689822] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    1.690656] rk-vcodec ff650000.vpu_service: probe device
[    1.691379] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    1.692546] rk-vcodec ff650000.vpu_service: could not find power_model node
[    1.693182] rk-vcodec ff650000.vpu_service: init success
[    1.693943] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    1.694888] rk-vcodec ff660000.rkvdec: probe device
[    1.695520] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    1.696470] rk-vcodec ff660000.rkvdec: could not find power_model node
[    1.697052] rk-vcodec ff660000.rkvdec: init success
[    1.698929] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.699619] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.701862] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.702550] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.704432] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.705653] pwm-regulator: supplied by vcc5v0_sys
[    1.706763] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.707938] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[    1.710494] [drm] Initialized drm 1.1.0 20060810
[    1.714631] [drm] Rockchip DRM driver version: v1.0.1
[    1.715433] rockchip-drm display-subsystem: dmc is disabled
[    1.716234] rockchip-vop ff900000.vop: missing rockchip,grf property
[    1.717053] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008f6b238)
[    1.717806] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[    1.718560] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008f6b238)
[    1.719519] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    1.720134] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.720935] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.722600] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008f5f548)
[    1.723355] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.723935] [drm] No driver support for vblank timestamp query.
[    2.582459] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 2560x1440p60, type: 11
[    2.602727] dwhdmi-rockchip ff940000.hdmi: Rate 241500000 missing; compute N dynamically
[    2.609916] Freeing drm_logo memory: 1236K
[    2.687353] Console: switching to colour frame buffer device 320x90
[    2.745344] rockchip-drm display-subsystem: fb0:  frame buffer device
[    2.753858] mali ff9a0000.gpu: Failed to get regulator
[    2.754331] mali ff9a0000.gpu: Power control initialization failed
[    2.755284] Unable to detect cache hierarchy for CPU 0
[    2.756530] brd: module loaded
[    2.762102] loop: module loaded
[    2.762942] zram: Added device: zram0
[    2.763591] lkdtm: No crash points registered, enable through debugfs
[    2.764521] Loading dl1825 driver
[    2.766415] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    2.768346] tun: Universal TUN/TAP device driver, 1.6
[    2.768803] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.770360] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    2.771072] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    2.771715] rk_gmac-dwmac fe300000.ethernet: TX delay(0x31).
[    2.772226] rk_gmac-dwmac fe300000.ethernet: RX delay(0x24).
[    2.772743] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    2.773467] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    2.774082] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    2.779643] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    2.780266] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    2.780719]  Ring mode enabled
[    2.781001]  DMA HW capability register supported
[    2.781420]  Normal descriptors
[    2.781727]  RX Checksum Offload Engine supported (type 2)
[    2.782222]  Wake-Up On Lan supported
[    2.782598]  Enable RX Mitigation via HW Watchdog Timer
[    2.921959] libphy: stmmac: probed
[    2.922297] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    2.922867] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    2.923402] eth%d: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02)
[    2.923925] eth%d: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03)
[    2.924459] eth%d: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04)
[    2.924982] eth%d: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05)
[    2.925515] eth%d: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06)
[    2.926038] eth%d: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07)
[    2.926579] eth%d: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08)
[    2.927103] eth%d: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09)
[    2.927636] eth%d: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a)
[    2.928169] eth%d: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b)
[    2.928693] eth%d: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c)
[    2.929226] eth%d: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d)
[    2.929750] eth%d: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e)
[    2.930282] eth%d: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f)
[    2.930806] eth%d: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10)
[    2.931339] eth%d: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11)
[    2.931863] eth%d: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12)
[    2.932396] eth%d: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13)
[    2.932920] eth%d: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14)
[    2.933453] eth%d: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15)
[    2.933977] eth%d: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16)
[    2.934510] eth%d: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17)
[    2.935033] eth%d: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18)
[    2.935566] eth%d: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19)
[    2.936090] eth%d: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a)
[    2.936623] eth%d: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b)
[    2.937156] eth%d: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c)
[    2.937679] eth%d: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d)
[    2.938212] eth%d: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e)
[    2.938736] eth%d: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f)
[    2.941426] usbcore: registered new interface driver rtl8192cu
[    2.942015] usbcore: registered new interface driver rndis_wlan
[    2.942813] usbcore: registered new interface driver mt7601u
[    2.943443] Rockchip WiFi SYS interface (V1.00) ...
[    2.943972] usbcore: registered new interface driver rtl8150
[    2.944545] usbcore: registered new interface driver r8152
[    2.945087] usbcore: registered new interface driver asix
[    2.945625] usbcore: registered new interface driver ax88179_178a
[    2.946233] usbcore: registered new interface driver cdc_ether
[    2.946802] usbcore: registered new interface driver rndis_host
[    2.947416] usbcore: registered new interface driver cdc_ncm
[    2.947962] usbcore: registered new interface driver qmi_wwan
[    2.948533] usbcore: registered new interface driver cdc_mbim
[    2.954462] rockchip-dwc3 usb0: fail to get drvdata hcd
[    2.959973] rockchip-dwc3 usb1: fail to get drvdata hcd
[    2.962244] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.962844] ehci-pci: EHCI PCI platform driver
[    2.963324] ehci-platform: EHCI generic platform driver
[    2.967526] ehci-platform fe380000.usb: EHCI Host Controller
[    2.968229] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    2.969028] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    2.975155] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    2.975871] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.976490] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.977140] usb usb1: Product: EHCI Host Controller
[    2.977573] usb usb1: Manufacturer: Linux 4.4.194+ ehci_hcd
[    2.978073] usb usb1: SerialNumber: fe380000.usb
[    2.978926] hub 1-0:1.0: USB hub found
[    2.979332] hub 1-0:1.0: 1 port detected
[    2.983157] ehci-platform fe3c0000.usb: EHCI Host Controller
[    2.983803] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    2.984608] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    2.991148] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    2.991836] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.992455] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.993094] usb usb2: Product: EHCI Host Controller
[    2.993536] usb usb2: Manufacturer: Linux 4.4.194+ ehci_hcd
[    2.994036] usb usb2: SerialNumber: fe3c0000.usb
[    2.994862] hub 2-0:1.0: USB hub found
[    2.995266] hub 2-0:1.0: 1 port detected
[    2.996189] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.996749] ohci-platform: OHCI generic platform driver
[    2.997522] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    2.998277] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    2.999058] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    3.054286] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.054891] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.055543] usb usb3: Product: Generic Platform OHCI controller
[    3.056066] usb usb3: Manufacturer: Linux 4.4.194+ ohci_hcd
[    3.056575] usb usb3: SerialNumber: fe3a0000.usb
[    3.057412] hub 3-0:1.0: USB hub found
[    3.057780] hub 3-0:1.0: 1 port detected
[    3.058694] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    3.059443] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    3.060240] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    3.115360] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.115971] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.116626] usb usb4: Product: Generic Platform OHCI controller
[    3.117163] usb usb4: Manufacturer: Linux 4.4.194+ ohci_hcd
[    3.117665] usb usb4: SerialNumber: fe3e0000.usb
[    3.118716] hub 4-0:1.0: USB hub found
[    3.119089] hub 4-0:1.0: 1 port detected
[    3.120808] usbcore: registered new interface driver cdc_acm
[    3.121323] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.122083] usbcore: registered new interface driver cdc_wdm
[    3.122657] usbcore: registered new interface driver uas
[    3.123304] usbcore: registered new interface driver usb-storage
[    3.123933] usbcore: registered new interface driver usbserial
[    3.124515] usbcore: registered new interface driver usbserial_generic
[    3.125138] usbserial: USB Serial support registered for generic
[    3.125725] usbcore: registered new interface driver ch341
[    3.126256] usbserial: USB Serial support registered for ch341-uart
[    3.126891] usbcore: registered new interface driver cp210x
[    3.127438] usbserial: USB Serial support registered for cp210x
[    3.128054] usbcore: registered new interface driver ftdi_sio
[    3.128607] usbserial: USB Serial support registered for FTDI USB Serial Device
[    3.129506] usbcore: registered new interface driver keyspan
[    3.130035] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    3.130773] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    3.131465] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    3.132156] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    3.132862] usbcore: registered new interface driver option
[    3.133406] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.134354] usbcore: registered new interface driver oti6858
[    3.134883] usbserial: USB Serial support registered for oti6858
[    3.135484] usbcore: registered new interface driver pl2303
[    3.136017] usbserial: USB Serial support registered for pl2303
[    3.136622] usbcore: registered new interface driver qcserial
[    3.137176] usbserial: USB Serial support registered for Qualcomm USB modem
[    3.137873] usbcore: registered new interface driver sierra
[    3.138417] usbserial: USB Serial support registered for Sierra USB modem
[    3.140884] usbcore: registered new interface driver usbtouchscreen
[    3.141964] .. rk pwm remotectl v1.1 init
[    3.142668] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    3.143902] sensor_register_slave:mma8452,id=17
[    3.144367] sensor_register_slave:lis3dh,id=7
[    3.144773] sensor_register_slave:mma7660,id=18
[    3.145205] sensor_register_slave:lsm303d,id=23
[    3.145622] sensor_register_slave:gs_mc3230,id=24
[    3.146040] [Gsensor]   gsensor_init
[    3.146389] sensor_register_slave:mpu6880_acc,id=25
[    3.146829] sensor_register_slave:mpu6500_acc,id=26
[    3.147279] sensor_register_slave:lsm330_acc,id=27
[    3.147719] sensor_register_slave:akm8975,id=31
[    3.148147] sensor_register_slave:akm8963,id=32
[    3.148563] sensor_register_slave:l3g4200d,id=46
[    3.148980] sensor_register_slave:l3g20d,id=47
[    3.149397] sensor_register_slave:ewtsa,id=48
[    3.149802] sensor_register_slave:lsm330_gyro,id=52
[    3.150262] sensor_register_slave:cm3217,id=54
[    3.150667] sensor_register_slave:cm3218,id=55
[    3.151655] i2c /dev entries driver
[    3.153798] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    3.154537] fan53555-reg: supplied by vcc5v0_sys
[    3.157382] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    3.158077] fan53555-reg: supplied by vcc5v0_sys
[    3.161260] rk808 0-001b: Pmic Chip id: 0x0
[    3.164764] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    3.165422] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    3.166137] DCDC_REG1: supplied by vcc3v3_sys
[    3.167490] DCDC_REG2: supplied by vcc3v3_sys
[    3.168601] DCDC_REG3: supplied by vcc3v3_sys
[    3.169415] DCDC_REG4: supplied by vcc3v3_sys
[    3.170419] LDO_REG1: supplied by vcc3v3_sys
[    3.172075] LDO_REG2: supplied by vcc3v3_sys
[    3.173577] LDO_REG3: supplied by vcc3v3_sys
[    3.175092] LDO_REG4: supplied by vcc3v3_sys
[    3.176629] LDO_REG5: supplied by vcc3v3_sys
[    3.178163] LDO_REG6: supplied by vcc3v3_sys
[    3.179686] LDO_REG7: supplied by vcc3v3_sys
[    3.181224] LDO_REG8: supplied by vcc3v3_sys
[    3.182721] SWITCH_REG1: supplied by vcc3v3_sys
[    3.183564] SWITCH_REG2: supplied by vcc3v3_sys
[    3.187248] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    3.188458] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009ac8000
[    3.190301] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009aca000
[    3.191883] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009acc000
[    3.194020] IR NEC protocol handler initialized
[    3.195570] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[    3.196176] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[    3.199214] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
[    3.199802] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[    3.202411] usbcore: registered new interface driver npu_acm
[    3.203008] usbcore: registered new interface driver uvcvideo
[    3.203534] USB Video Class driver (1.1.1)
[    3.206725] Boot mode: coldboot
[    3.209102] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    3.210092] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[    3.211791] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    3.212716] rtk_btusb: Realtek Bluetooth USB driver ver 3.1.a2fd257.20190430-133301
[    3.213404] rtk_btcoex: rtk_btcoex_init: version: 1.2
[    3.213856] rtk_btcoex: create workqueue
[    3.214214] rtk_btcoex: Coex over UDP
[    3.214781] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[    3.215390] usbcore: registered new interface driver rtk_btusb
[    3.215921] Bluetooth: Virtual HCI driver ver 1.5
[    3.216549] Bluetooth: HCI UART driver ver 2.3
[    3.216949] Bluetooth: HCI UART protocol H4 registered
[    3.217419] Bluetooth: HCI UART protocol LL registered
[    3.217873] Bluetooth: HCI UART protocol ATH3K registered
[    3.218415] usbcore: registered new interface driver bfusb
[    3.218958] usbcore: registered new interface driver btusb
[    3.219967] cpu cpu0: bin=1
[    3.220298] cpu cpu0: leakage=18
[    3.233056] cpu cpu0: temp=50555, pvtm=148753 (148159 + 594)
[    3.233793] cpu cpu0: pvtm-volt-sel=2
[    3.234190] cpu cpu0: bin-scale=34
[    3.234802] cpu cpu4: bin=1
[    3.235157] cpu cpu4: leakage=33
[    3.248312] cpu cpu4: temp=50555, pvtm=153780 (153465 + 315)
[    3.249978] cpu cpu4: pvtm-volt-sel=1
[    3.250371] cpu cpu4: bin-scale=17
[    3.251779] cpu cpu0: avs=0
[    3.252158] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.253042] cpu cpu0: failed to find power_model node
[    3.254422] cpu cpu4: avs=0
[    3.254780] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.256066] cpu cpu4: failed to find power_model node
[    3.257439] sdhci: Secure Digital Host Controller Interface driver
[    3.257985] sdhci: Copyright(c) Pierre Ossman
[    3.258389] Synopsys Designware Multimedia Card Interface Driver
[    3.259801] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    3.260485] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    3.261098] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    3.261659] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    3.262535] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.263346] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    3.263892] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    3.265371] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    3.266029] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    3.266657] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    3.267210] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    3.268075] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.268909] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    3.270214] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.272417] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    3.272951] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    3.297156] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    3.303421] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    3.305322] hidraw: raw HID events driver (C) Jiri Kosina
[    3.306301] usbcore: registered new interface driver usbhid
[    3.306800] usbhid: USB HID core driver
[    3.307544] inv_mpu_iio: inv_mpu_init:746
[    3.311426] usbcore: registered new interface driver snd-usb-audio
[    3.313078] rt5640 1-001c: Can not read property hp_det_gpio
[    3.313590] rt5640 1-001c: Can not read property: linein-mute.
[    3.328056] rk-hdmi-dp-sound hdmi-dp-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[    3.330447] NET: Registered protocol family 10
[    3.331719] NET: Registered protocol family 17
[    3.332253] Bluetooth: RFCOMM socket layer initialized
[    3.332727] Bluetooth: RFCOMM ver 1.11
[    3.333068] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.333610] Bluetooth: HIDP socket layer initialized
[    3.334088] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.334821] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    3.335302] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[    3.335918] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    3.336553] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    3.337282] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    3.338081] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    3.338726] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    3.339196] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    3.339681] [BT_RFKILL]: Enter rfkill_rk_init
[    3.340542] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    3.341302] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    3.342027] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[    3.342751] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    3.343740] [BT_RFKILL]: Request irq for bt wakeup host
[    3.344255] [BT_RFKILL]: ** disable irq
[    3.344702] [BT_RFKILL]: bt_default device registered.
[    3.345224] Key type dns_resolver registered
[    3.345962] sensor_register_slave:mpu6880_gyro,id=51
[    3.346550] ov13850 1-0036: driver version: 00.01.03
[    3.347315] ov13850 1-0036: could not get default pinstate
[    3.347800] ov13850 1-0036: could not get sleep pinstate
[    3.350399] ov13850 1-0036: write SCCB_ID failed
[    3.350904] ov13850: probe of 1-0036 failed with error -5
[    3.351431] ov13850 1-0046: driver version: 00.01.03
[    3.352132] ov13850 1-0046: could not get default pinstate
[    3.352617] ov13850 1-0046: could not get sleep pinstate
[    3.353607] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    3.354956] mmcblk0: mmc0:0001 TX2932 29.1 GiB
[    3.354972] ov13850 1-0046: write SCCB_ID failed
[    3.355080] ov13850: probe of 1-0046 failed with error -5
[    3.355848] Registered cp15_barrier emulation handler
[    3.356273] Registered setend emulation handler
[    3.356795] Loading compiled-in X.509 certificates
[    3.357912] mmcblk0boot0: mmc0:0001 TX2932 partition 1 4.00 MiB
[    3.358176] Btrfs loaded
[    3.358895] rga2: Driver loaded successfully ver:3.2.18218
[    3.359002] mmcblk0boot1: mmc0:0001 TX2932 partition 2 4.00 MiB
[    3.359343] mmcblk0rpmb: mmc0:0001 TX2932 partition 3 4.00 MiB
[    3.360659] rga2: Module initialized.
[    3.361899] mali ff9a0000.gpu: leakage=22
[    3.362323]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    3.374809] mali ff9a0000.gpu: temp=51111, pvtm=124775 (124655 + 120)
[    3.376226] mali ff9a0000.gpu: pvtm-volt-sel=1
[    3.377171] mali ff9a0000.gpu: avs=0
[    3.378004] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    3.378851] mali ff9a0000.gpu: Protected mode not available
[    3.379805] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.380575] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    3.381665] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 423; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    3.383503] mali ff9a0000.gpu: Probed as mali0
[    3.388182] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    3.388893] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    3.389715] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    3.390522] xhci-hcd xhci-hcd.9.auto: irq 229, io mem 0xfe800000
[    3.391263] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.391860] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.392509] usb usb5: Product: xHCI Host Controller
[    3.392946] usb usb5: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.393446] usb usb5: SerialNumber: xhci-hcd.9.auto
[    3.394322] hub 5-0:1.0: USB hub found
[    3.394678] hub 5-0:1.0: 1 port detected
[    3.395284] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    3.395930] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    3.396666] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.397477] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.398073] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.398720] usb usb6: Product: xHCI Host Controller
[    3.399164] usb usb6: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.399665] usb usb6: SerialNumber: xhci-hcd.9.auto
[    3.400976] hub 6-0:1.0: USB hub found
[    3.401371] hub 6-0:1.0: 1 port detected
[    3.407557] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    3.408409] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 7
[    3.409291] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    3.410136] xhci-hcd xhci-hcd.10.auto: irq 230, io mem 0xfe900000
[    3.410957] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    3.411590] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.412243] usb usb7: Product: xHCI Host Controller
[    3.412379] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
[    3.412387] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.412392] usb 2-1: Product: USB 2.0 Hub [MTT]
[    3.413197] hub 2-1:1.0: USB hub found
[    3.413378] hub 2-1:1.0: 7 ports detected
[    3.415010] usb usb7: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.415522] usb usb7: SerialNumber: xhci-hcd.10.auto
[    3.416601] hub 7-0:1.0: USB hub found
[    3.416975] hub 7-0:1.0: 1 port detected
[    3.417730] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    3.418499] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 8
[    3.419285] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.420151] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    3.420757] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.421411] usb usb8: Product: xHCI Host Controller
[    3.421845] usb usb8: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.422357] usb usb8: SerialNumber: xhci-hcd.10.auto
[    3.423495] hub 8-0:1.0: USB hub found
[    3.423866] hub 8-0:1.0: 1 port detected
[    3.426283] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    3.426962] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    3.427589] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    3.428141] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    3.429020] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.429859] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    3.430418] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    3.431437] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    3.444724] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.458401] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    3.460748] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    3.461444] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    3.462057] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    3.462607] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    3.463488] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.464332] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    3.465300] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq
[    3.465962] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    3.466658] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    3.479985] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.493569] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    3.502686] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[    3.506171] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input1
[    3.509019]
[    3.509220] =======================================================
[    3.509785] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    3.510348] =======================================================
[    3.510900] Realtek 8723DU USB WiFi driver (Powered by Rockchip) init.
[    3.511481] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    3.511897] [WLAN_RFKILL]: wifi turn on power. -1
[    3.512318] RTW: module init start
[    3.512620] RTW: rtl8723du v5.6.5.1_34252.20190703_COEX20181130-2e2e
[    3.513188] RTW: build time: May 17 2022 22:49:45
[    3.513603] RTW: rtl8723du BT-Coex version = COEX20181130-2e2e
[    3.514236] usbcore: registered new interface driver rtl8723du
[    3.514754] RTW: module init ret=0
[    3.515661] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[    3.516344] [dhd] dhd_module_init: in Dongle Host Driver, version 100.10.545.19 (r826445-20210324-3)
[    3.516525] ==gsl_ts_init==
[    3.516617] GSLX680 Enter gsl_ts_probe
[    3.516618] ==kzalloc success=
[    3.517339] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.518513] [dhd] ======== dhd_wlan_init_plat_data ========
[    3.518977] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.519495] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    3.519992] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=69, oob_irq_flags=0x414
[    3.520585] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.521186] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[    3.521613] [dhd] dhd_wifi_platform_load: Enter
[    3.522017] [dhd] Power-up adapter 'DHD generic adapter'
[    3.522519] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[    3.523038] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[    3.523525] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.524021] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    3.524441] [WLAN_RFKILL]: wifi turn on power. -1
[    3.527378] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[    3.581294] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[    3.719824] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 224
[    3.730354] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    3.730930] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    3.825375] [dhd] wifi_platform_bus_enumerate device present 1
[    3.825906] [dhd] ======== Card detection to detect SDIO card! ========
[    3.826548] mmc1:mmc host rescan start!
[    3.843045] [dhd] bcmsdh_register: register client driver
[    3.844102] [dhd] bcmsdh_sdmmc_probe: Enter num=1
[    3.845155] [dhd] bcmsdh_sdmmc_probe: Enter num=2
[    3.845592] [dhd] bus num (host idx)=1, slot num (rca)=1
[    3.846070] [dhd] found adapter info 'DHD generic adapter'
[    3.847279] [dhd] sdioh_attach: set sd_f2_blocksize 256
[    3.848139] [dhd] sdioh_attach: sd clock rate = 0
[    3.851215] [dhd] dhdsdio_probe : no mutex held. set lock
[    3.852716] [dhd] F1 signature read @0x18000000=0x17224356
[    3.856263] vendor storage:20190527 ret = 0
[    3.867288] [dhd] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[    3.868648] [dhd] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[    3.869467] [dhd] dhd_conf_set_chiprev : devid=0x4356, chip=0x4354, chiprev=2
[    3.872487] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.873279] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.874049] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.875560] [dhd] dhd_log_dump_init: kernel log buf size = 256KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 38KB
[    3.878543] [dhd] dhd_attach(): thread:dhd_watchdog_thread:c8 started
[    3.879305] [dhd] dhd_attach(): thread:dhd_dpc:c9 started
[    3.880157] [dhd] dhd_attach(): thread:dhd_rxf:ca started
[    3.880641] [dhd] dhd_deferred_work_init: work queue initialized
[    3.881200] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[    3.881875] [dhd] get_mem_val_from_file: File [/data/misc/wifi/.memdump.info] doesn't exist
[    3.882624] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[    3.883131] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[    3.894416] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[    3.895045] [dhd] Dongle Host Driver, version 100.10.545.19 (r826445-20210324-3)
[    3.896666] [dhd] Register interface [wlan0]  MAC: d4:12:43:a0:3f:4c
[    3.896666]
[    3.897394] [dhd] dhdsdio_probe : the lock is released.
[    3.897988] [dhd] dhd_module_init: Exit err=0
[    4.385454] gsl_ts_probe--1375, i2c_master_recv fail
[    4.386071] ret=0
[    4.388993] rk808-rtc rk808-rtc: setting system clock to 2022-06-24 07:23:46 UTC (1656055426)
[    4.429301] vcc_mipi: disabling
[    4.429596] dvdd_1v2: disabling
[    4.435048] ret 1024
[    4.435835] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '22:48:03', on 'May 17 2022'.
[    4.438164] Mali: Mali device driver loaded
[    4.438869] rkisp1 ff910000.rkisp1: clear unready subdev num: 1
[    4.439700] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.440266] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.440817] rkisp1: update sensor failed
[    4.441179] rkisp1 ff920000.rkisp1: clear unready subdev num: 1
[    4.441949] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.442513] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.443064] rkisp1: update sensor failed
[    4.444052] ALSA device list:
[    4.444337]   #0: rk-hdmi-dp-sound
[    4.444640]   #1: rockchip,rt5640-codec
[    4.445644] Freeing unused kernel memory: 1216K
Loading, please wait...
/dev/console is Ok
starting version 237
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
mount: mounting /dev/mmcblk0p7 on /root failed: Invalid argument
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Warning: overlayroot: configuring overlayroot with driver=overlay mode=device opts='dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' per kernel cmdline
[    5.177150] EXT4-fs (mmcblk0p8): recovery complete
[    5.177856] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
mount: mounting /root on /root-ro failed: Invalid argument
Failure: overlayroot: failed to move root away from /root to /root-ro
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
Warning: Something odd, no /lib/modules/4.4.194+ in initramfs.
done.
mount: mounting /run on /root/run failed: No such file or directory
run-init: current directory on the same filesystem as the root: error 0
Target filesystem doesn't have requested /sbin/init.
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
No init found. Try passing init= bootarg.


BusyBox v1.27.2 (Ubuntu 1:1.27.2-2ubuntu3.2) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) [    8.631339] random: nonblocking pool is initialized
▒▒
Error writing to serial device

──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────

Session stopped
    - Press <return> to exit tab
    - Press R to restart session
    - Press S to save terminal output to file

──────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────

Session stopped
    - Press <return> to exit tab
    - Press R to restart session
    - Press S to save terminal output to file
DDR Version 1.26 20210628
In
channel 0
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 0, cs 1, advanced training done
channel 1, cs 0, advanced training done
channel 1, cs 1, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 347
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 68041
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             boot, start:0xa000, size:0x20000
GPT part:  4, name:         recovery, start:0x2a000, size:0x20000
GPT part:  5, name:           backup, start:0x4a000, size:0x10000
GPT part:  6, name:           rootfs, start:0x5a000, size:0x600000
GPT part:  7, name:         userdata, start:0x65a000, size:0x33effdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xe70b0
RunBL31 0x40000 @ 109062 us
NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-278-gef70f120a #zhangzj #9 Fri Sep 17 09:39:24 UTC 2021 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-g948c63a14e #zhang (Jun 23 2022 - 23:17:27 -0700)

Model: Firefly-RK3399 Board
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset: f5bdd000, fdt: f3dd14d8
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 50Mhz
PartType: EFI
boot mode: None
Found DTB in boot part
DTB: rk-kernel.dtb
HASH(c): OK
Android header version 0
I2c0 speed: 400000Hz
PMIC:  RK808
vdd_center 900000 uV
vdd_cpu_l 825000 uV
vdd_log 1100000 uV
In:    serial
Out:   serial
Err:   serial
Model: AIO-3399J Board (Linux Opensource)
download key pressed... entering download mode...
RKUSB: LUN 0, dev 0, hwpart 0, sector 0x0, count 0x3a4a000
\DDR Version 1.26 20210628
In
soft reset
SRX
channel 0
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 0, cs 1, advanced training done
channel 1, cs 0, advanced training done
channel 1, cs 1, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 438
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 68609
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             boot, start:0xa000, size:0x20000
GPT part:  4, name:         recovery, start:0x2a000, size:0x20000
GPT part:  5, name:           backup, start:0x4a000, size:0x10000
GPT part:  6, name:           rootfs, start:0x5a000, size:0x600000
GPT part:  7, name:         userdata, start:0x65a000, size:0x33effdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xe70b0
RunBL31 0x40000 @ 111697 us
NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-278-gef70f120a #zhangzj #9 Fri Sep 17 09:39:24 UTC 2021 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-g948c63a14e #zhang (Jun 23 2022 - 23:17:27 -0700)

Model: Firefly-RK3399 Board
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset: f5bdd000, fdt: f3dd14d8
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 50Mhz
PartType: EFI
boot mode: recovery (misc)
Found DTB in recovery part
DTB: rk-kernel.dtb
HASH(c): OK
Android header version 0
I2c0 speed: 400000Hz
PMIC:  RK808
vdd_center 900000 uV
vdd_cpu_l 825000 uV
vdd_log 1100000 uV
In:    serial
Out:   serial
Err:   serial
Model: AIO-3399J Board (Linux Opensource)
Rockchip UBOOT DRM driver version: v1.0.1
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
Could not find baseparameter partition
mode:1920x1080
Detailed mode clock 148500 kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
CEA mode used vic=16
final pixclk = 148500000 tmdsclk = 148500000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 816000 KHz
  dpll 856000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 148000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "recovery"
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 23035 KiB
RAM disk load addr 0x0a200000 size 8513 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831c6fa
No file: logo_kernel.bmp
logo_bmp uncompressed size=127818
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0xf8000000 (size: 0xede00000)
Total: 3209.144 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.194+ (zhang@ubuntu) (firefly: 2c8b0d223c45454b8f8c0dc5cfd6bf2816a0a606) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #3 SMP Thu Jun 23 23:17:57 PDT 2022
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ecb000 s46056 r8192 d31768 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 991752
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  recovery androidboot.slot_suffix= androidboot.serialno=f48ee822a24c6f9f  ro rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xf7e83000-0xf7ec3000] (0MB)
[    0.000000] Memory: 3923532K/4030464K available (14462K kernel code, 1786K rwdata, 5504K rodata, 1216K init, 765K bss, 106932K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009410000 - 0xffffff8009540000   (  1216 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008ea0000   ( 14464 KB)
[    0.000000]     .rodata : 0xffffff8008ea0000 - 0xffffff8009410000   (  5568 KB)
[    0.000000]       .data : 0xffffff8009540000 - 0xffffff80096fe808   (  1787 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @f2d00000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f2c90000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f2ca0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002186] Console: colour dummy device 80x25
[    0.002628] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003615] pid_max: default: 32768 minimum: 301
[    0.004142] Security Framework initialized
[    0.004605] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005246] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006677] Initializing cgroup subsys io
[    0.007085] Initializing cgroup subsys memory
[    0.007526] Initializing cgroup subsys devices
[    0.007956] Initializing cgroup subsys freezer
[    0.008397] Initializing cgroup subsys net_cls
[    0.008826] Initializing cgroup subsys perf_event
[    0.009281] Initializing cgroup subsys net_prio
[    0.009731] Initializing cgroup subsys hugetlb
[    0.010159] Initializing cgroup subsys pids
[    0.010576] ftrace: allocating 51841 entries in 203 pages
[    0.134300] sched-energy: Sched-energy-costs installed from DT
[    0.134865] CPU0: update cpu_capacity 401
[    0.135302] ASID allocator initialised with 32768 entries
[    0.139028] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.140367] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.142652] Detected VIPT I-cache on CPU1
[    0.142687] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.142716] CPU1: using LPI pending table @0x00000000f2f50000
[    0.142770] CPU1: update cpu_capacity 401
[    0.142774] CPU1: Booted secondary processor [410fd034]
[    0.143567] Detected VIPT I-cache on CPU2
[    0.143597] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.143628] CPU2: using LPI pending table @0x00000000f2f80000
[    0.143678] CPU2: update cpu_capacity 401
[    0.143682] CPU2: Booted secondary processor [410fd034]
[    0.144433] Detected VIPT I-cache on CPU3
[    0.144463] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.144492] CPU3: using LPI pending table @0x00000000f2fd0000
[    0.144540] CPU3: update cpu_capacity 401
[    0.144544] CPU3: Booted secondary processor [410fd034]
[    0.145335] Detected PIPT I-cache on CPU4
[    0.145360] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.145395] CPU4: using LPI pending table @0x00000000f2410000
[    0.145429] CPU4: update cpu_capacity 1024
[    0.145432] CPU4: Booted secondary processor [410fd082]
[    0.146099] Detected PIPT I-cache on CPU5
[    0.146123] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.146158] CPU5: using LPI pending table @0x00000000f2440000
[    0.146192] CPU5: update cpu_capacity 1024
[    0.146195] CPU5: Booted secondary processor [410fd082]
[    0.146289] Brought up 6 CPUs
[    0.158640] SMP: Total of 6 processors activated.
[    0.159090] CPU features: detected feature: GIC system register CPU interface
[    0.159777] CPU features: detected feature: 32-bit EL0 Support
[    0.160336] CPU: All CPU(s) started at EL2
[    0.160765] alternatives: patching kernel code
[    0.162549] devtmpfs: initialized
[    0.188463] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.189417] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.190389] xor: measuring software checksum speed
[    0.200760]    8regs     :  2860.000 MB/sec
[    0.210815]    8regs_prefetch:  2564.000 MB/sec
[    0.220868]    32regs    :  3208.000 MB/sec
[    0.230922]    32regs_prefetch:  2848.000 MB/sec
[    0.231369] xor: using function: 32regs (3208.000 MB/sec)
[    0.231896] pinctrl core: initialized pinctrl subsystem
[    0.234065] Failed to find legacy iommu devices
[    0.234870] NET: Registered protocol family 16
[    0.240536] cpuidle: using governor ladder
[    0.244544] cpuidle: using governor menu
[    0.244935] Registered FIQ tty driver
[    0.245832] vdso: 2 pages (1 code @ ffffff8008ea6000, 1 data @ ffffff8009544000)
[    0.246565] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.247632] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.271974] console [pstore-1] enabled
[    0.272337] pstore: Registered ramoops as persistent store backend
[    0.272934] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.275928] console [ttyFIQ0] enabled
[    0.275928] console [ttyFIQ0] enabled
[    0.276619] bootconsole [uart0] disabled
[    0.276619] bootconsole [uart0] disabled
[    0.277551] Registered fiq debugger ttyFIQ0
[    0.329485] raid6: int64x1  gen()   468 MB/s
[    0.346579] raid6: int64x1  xor()   429 MB/s
[    0.363716] raid6: int64x2  gen()   675 MB/s
[    0.380767] raid6: int64x2  xor()   599 MB/s
[    0.397850] raid6: int64x4  gen()   976 MB/s
[    0.414958] raid6: int64x4  xor()   677 MB/s
[    0.432063] raid6: int64x8  gen()   792 MB/s
[    0.449128] raid6: int64x8  xor()   634 MB/s
[    0.466259] raid6: neonx1   gen()   968 MB/s
[    0.483311] raid6: neonx1   xor()   681 MB/s
[    0.500421] raid6: neonx2   gen()  1277 MB/s
[    0.517496] raid6: neonx2   xor()   964 MB/s
[    0.534599] raid6: neonx4   gen()  1726 MB/s
[    0.551665] raid6: neonx4   xor()  1175 MB/s
[    0.568759] raid6: neonx8   gen()  1691 MB/s
[    0.585865] raid6: neonx8   xor()  1250 MB/s
[    0.586250] raid6: using algorithm neonx4 gen() 1726 MB/s
[    0.586732] raid6: .... xor() 1175 MB/s, rmw enabled
[    0.587173] raid6: using intx1 recovery algorithm
[    0.592139] iommu: Adding device ff650000.vpu_service to group 0
[    0.592757] iommu: Adding device ff660000.rkvdec to group 1
[    0.593372] iommu: Adding device ff8f0000.vop to group 2
[    0.593932] iommu: Adding device ff900000.vop to group 3
[    0.594502] iommu: Adding device ff910000.rkisp1 to group 4
[    0.595087] iommu: Adding device ff920000.rkisp1 to group 5
[    0.596061] rk_iommu ff650800.iommu: can't get sclk
[    0.596753] rk_iommu ff660480.iommu: can't get sclk
[    0.597381] rk_iommu ff8f3f00.iommu: can't get sclk
[    0.597980] rk_iommu ff903f00.iommu: can't get sclk
[    0.598567] rk_iommu ff914000.iommu: can't get sclk
[    0.599170] rk_iommu ff924000.iommu: can't get sclk
[    0.599943] SCSI subsystem initialized
[    0.600620] usbcore: registered new interface driver usbfs
[    0.601145] usbcore: registered new interface driver hub
[    0.601714] usbcore: registered new device driver usb
[    0.602234] media: Linux media interface: v0.10
[    0.602686] Linux video capture interface: v2.00
[    0.603174] pps_core: LinuxPPS API ver. 1 registered
[    0.603617] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.604446] PTP clock support registered
[    0.605926] Advanced Linux Sound Architecture Driver Initialized.
[    0.606981] Bluetooth: Core ver 2.21
[    0.607324] NET: Registered protocol family 31
[    0.607730] Bluetooth: HCI device and connection manager initialized
[    0.608304] Bluetooth: HCI socket layer initialized
[    0.608745] Bluetooth: L2CAP socket layer initialized
[    0.609233] Bluetooth: SCO socket layer initialized
[    0.610025] NetLabel: Initializing
[    0.610331] NetLabel:  domain hash size = 128
[    0.610715] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.611199] NetLabel:  unlabeled traffic allowed by default
[    0.611836] nfc: nfc_init: NFC Core ver 0.1
[    0.612254] NET: Registered protocol family 39
[    0.612759] rockchip-cpuinfo cpuinfo: Serial         : f48ee822a24c6f9f
[    0.614122] clocksource: Switched to clocksource arch_sys_counter
[    0.667082] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.668023] NET: Registered protocol family 2
[    0.668857] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.669764] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.671282] TCP: Hash tables configured (established 32768 bind 32768)
[    0.671977] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.672696] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.673666] NET: Registered protocol family 1
[    0.674343] RPC: Registered named UNIX socket transport module.
[    0.674868] RPC: Registered udp transport module.
[    0.675302] RPC: Registered tcp transport module.
[    0.675721] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.676956] Trying to unpack rootfs image as initramfs...
[    1.134430] Freeing initrd memory: 8512K
[    1.135520] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.136345] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.138351] kvm [1]: 8-bit VMID
[    1.138636] kvm [1]: Hyp mode initialized successfully
[    1.139218] kvm [1]: interrupt-controller@fff20000 IRQ10
[    1.139874] kvm [1]: timer IRQ12
[    1.142960] audit: initializing netlink subsys (disabled)
[    1.143481] audit: type=2000 audit(1.053:1): initialized
[    1.144388] Initialise system trusted keyring
[    1.145147] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.153961] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.155437] NFS: Registering the id_resolver key type
[    1.155909] Key type id_resolver registered
[    1.156298] Key type id_legacy registered
[    1.156673] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.157969] ntfs: driver 2.1.32 [Flags: R/O].
[    1.158749] fuse init (API version 7.23)
[    1.159468] SGI XFS with security attributes, no debug enabled
[    1.165478] NET: Registered protocol family 38
[    1.165901] Key type asymmetric registered
[    1.166285] Asymmetric key parser 'x509' registered
[    1.166875] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.167666] io scheduler noop registered
[    1.168021] io scheduler deadline registered
[    1.168456] io scheduler cfq registered (default)
[    1.170382] phy phy-ff770000.syscon:usb2-phy@e450.1: Failed to get VBUS supply regulator
[    1.172045] phy phy-ff770000.syscon:usb2-phy@e460.3: Failed to get VBUS supply regulator
[    1.177439] ace test_init function.
[    1.177923] ace test_init end.ret=0
[    1.178633] radar end.ret=0
[    1.181394] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.181990] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.182600] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.183179] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.183788] PCI host bridge /pcie@f8000000 ranges:
[    1.184241]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.184700]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    1.727184] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.727800] rockchip-pcie f8000000.pcie: deferred probe failed
[    1.728578] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    1.730072] Module initialized.
[    1.730838] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    1.731690] rk-vcodec ff650000.vpu_service: probe device
[    1.732421] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    1.733559] rk-vcodec ff650000.vpu_service: could not find power_model node
[    1.734193] rk-vcodec ff650000.vpu_service: init success
[    1.734959] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    1.735916] rk-vcodec ff660000.rkvdec: probe device
[    1.736547] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    1.737496] rk-vcodec ff660000.rkvdec: could not find power_model node
[    1.738078] rk-vcodec ff660000.rkvdec: init success
[    1.739953] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.740642] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.742895] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.743582] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.745459] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.746682] pwm-regulator: supplied by vcc5v0_sys
[    1.747797] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.748971] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[    1.751559] [drm] Initialized drm 1.1.0 20060810
[    1.755726] [drm] Rockchip DRM driver version: v1.0.1
[    1.756515] rockchip-drm display-subsystem: dmc is disabled
[    1.757316] rockchip-vop ff900000.vop: missing rockchip,grf property
[    1.758151] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008f6b238)
[    1.758890] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[    1.759653] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008f6b238)
[    1.760613] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    1.761258] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.762041] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.763755] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008f5f548)
[    1.764515] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.765095] [drm] No driver support for vblank timestamp query.
[    2.617539] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 2560x1440p60, type: 11
[    2.637807] dwhdmi-rockchip ff940000.hdmi: Rate 241500000 missing; compute N dynamically
[    2.644998] Freeing drm_logo memory: 1236K
[    2.722427] Console: switching to colour frame buffer device 320x90
[    2.780420] rockchip-drm display-subsystem: fb0:  frame buffer device
[    2.788786] mali ff9a0000.gpu: Failed to get regulator
[    2.789260] mali ff9a0000.gpu: Power control initialization failed
[    2.790218] Unable to detect cache hierarchy for CPU 0
[    2.791463] brd: module loaded
[    2.796936] loop: module loaded
[    2.797775] zram: Added device: zram0
[    2.798429] lkdtm: No crash points registered, enable through debugfs
[    2.799361] Loading dl1825 driver
[    2.801289] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    2.803206] tun: Universal TUN/TAP device driver, 1.6
[    2.803661] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.805227] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    2.805927] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    2.806569] rk_gmac-dwmac fe300000.ethernet: TX delay(0x31).
[    2.807072] rk_gmac-dwmac fe300000.ethernet: RX delay(0x24).
[    2.807596] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    2.808319] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    2.808934] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    2.814495] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    2.815122] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    2.815575]  Ring mode enabled
[    2.815856]  DMA HW capability register supported
[    2.816269]  Normal descriptors
[    2.816576]  RX Checksum Offload Engine supported (type 2)
[    2.817062]  Wake-Up On Lan supported
[    2.817428]  Enable RX Mitigation via HW Watchdog Timer
[    2.929746] libphy: stmmac: probed
[    2.930067] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    2.930654] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    2.931191] eth%d: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02)
[    2.931714] eth%d: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03)
[    2.932248] eth%d: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04)
[    2.932771] eth%d: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05)
[    2.933304] eth%d: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06)
[    2.933827] eth%d: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07)
[    2.934361] eth%d: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08)
[    2.934884] eth%d: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09)
[    2.935417] eth%d: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a)
[    2.935942] eth%d: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b)
[    2.936475] eth%d: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c)
[    2.936999] eth%d: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d)
[    2.937533] eth%d: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e)
[    2.938056] eth%d: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f)
[    2.938590] eth%d: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10)
[    2.939123] eth%d: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11)
[    2.939647] eth%d: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12)
[    2.940181] eth%d: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13)
[    2.940704] eth%d: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14)
[    2.941237] eth%d: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15)
[    2.941761] eth%d: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16)
[    2.942294] eth%d: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17)
[    2.942818] eth%d: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18)
[    2.943351] eth%d: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19)
[    2.943875] eth%d: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a)
[    2.944408] eth%d: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b)
[    2.944940] eth%d: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c)
[    2.945474] eth%d: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d)
[    2.945998] eth%d: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e)
[    2.946531] eth%d: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f)
[    2.949235] usbcore: registered new interface driver rtl8192cu
[    2.949820] usbcore: registered new interface driver rndis_wlan
[    2.950626] usbcore: registered new interface driver mt7601u
[    2.951222] Rockchip WiFi SYS interface (V1.00) ...
[    2.951744] usbcore: registered new interface driver rtl8150
[    2.952321] usbcore: registered new interface driver r8152
[    2.952864] usbcore: registered new interface driver asix
[    2.953402] usbcore: registered new interface driver ax88179_178a
[    2.953992] usbcore: registered new interface driver cdc_ether
[    2.954578] usbcore: registered new interface driver rndis_host
[    2.955201] usbcore: registered new interface driver cdc_ncm
[    2.955747] usbcore: registered new interface driver qmi_wwan
[    2.956318] usbcore: registered new interface driver cdc_mbim
[    2.962191] rockchip-dwc3 usb0: fail to get drvdata hcd
[    2.967451] rockchip-dwc3 usb1: fail to get drvdata hcd
[    2.969712] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.970326] ehci-pci: EHCI PCI platform driver
[    2.970791] ehci-platform: EHCI generic platform driver
[    2.975072] ehci-platform fe380000.usb: EHCI Host Controller
[    2.975901] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    2.976741] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    2.983152] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    2.983928] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.984551] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.985203] usb usb1: Product: EHCI Host Controller
[    2.985638] usb usb1: Manufacturer: Linux 4.4.194+ ehci_hcd
[    2.986151] usb usb1: SerialNumber: fe380000.usb
[    2.987210] hub 1-0:1.0: USB hub found
[    2.987584] hub 1-0:1.0: 1 port detected
[    2.992091] ehci-platform fe3c0000.usb: EHCI Host Controller
[    2.992858] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    2.993734] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    3.000154] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    3.000902] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.001525] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.002177] usb usb2: Product: EHCI Host Controller
[    3.002612] usb usb2: Manufacturer: Linux 4.4.194+ ehci_hcd
[    3.003124] usb usb2: SerialNumber: fe3c0000.usb
[    3.004134] hub 2-0:1.0: USB hub found
[    3.004505] hub 2-0:1.0: 1 port detected
[    3.005720] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.006300] ohci-platform: OHCI generic platform driver
[    3.007200] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    3.008058] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    3.008877] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    3.064337] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.064944] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.065599] usb usb3: Product: Generic Platform OHCI controller
[    3.066137] usb usb3: Manufacturer: Linux 4.4.194+ ohci_hcd
[    3.066639] usb usb3: SerialNumber: fe3a0000.usb
[    3.067641] hub 3-0:1.0: USB hub found
[    3.068013] hub 3-0:1.0: 1 port detected
[    3.069096] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    3.069947] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    3.070761] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    3.126329] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.126936] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.127591] usb usb4: Product: Generic Platform OHCI controller
[    3.128129] usb usb4: Manufacturer: Linux 4.4.194+ ohci_hcd
[    3.128639] usb usb4: SerialNumber: fe3e0000.usb
[    3.129635] hub 4-0:1.0: USB hub found
[    3.130005] hub 4-0:1.0: 1 port detected
[    3.131829] usbcore: registered new interface driver cdc_acm
[    3.132343] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.133103] usbcore: registered new interface driver cdc_wdm
[    3.133678] usbcore: registered new interface driver uas
[    3.134318] usbcore: registered new interface driver usb-storage
[    3.134957] usbcore: registered new interface driver usbserial
[    3.135539] usbcore: registered new interface driver usbserial_generic
[    3.136163] usbserial: USB Serial support registered for generic
[    3.136749] usbcore: registered new interface driver ch341
[    3.137294] usbserial: USB Serial support registered for ch341-uart
[    3.137904] usbcore: registered new interface driver cp210x
[    3.138447] usbserial: USB Serial support registered for cp210x
[    3.139063] usbcore: registered new interface driver ftdi_sio
[    3.139622] usbserial: USB Serial support registered for FTDI USB Serial Device
[    3.140522] usbcore: registered new interface driver keyspan
[    3.141051] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    3.141788] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    3.142477] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    3.143174] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    3.143881] usbcore: registered new interface driver option
[    3.144428] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.145398] usbcore: registered new interface driver oti6858
[    3.145928] usbserial: USB Serial support registered for oti6858
[    3.146533] usbcore: registered new interface driver pl2303
[    3.147061] usbserial: USB Serial support registered for pl2303
[    3.147666] usbcore: registered new interface driver qcserial
[    3.148220] usbserial: USB Serial support registered for Qualcomm USB modem
[    3.148920] usbcore: registered new interface driver sierra
[    3.149467] usbserial: USB Serial support registered for Sierra USB modem
[    3.151936] usbcore: registered new interface driver usbtouchscreen
[    3.152997] .. rk pwm remotectl v1.1 init
[    3.153710] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    3.154933] sensor_register_slave:mma8452,id=17
[    3.155372] sensor_register_slave:lis3dh,id=7
[    3.155766] sensor_register_slave:mma7660,id=18
[    3.156194] sensor_register_slave:lsm303d,id=23
[    3.156610] sensor_register_slave:gs_mc3230,id=24
[    3.157029] [Gsensor]   gsensor_init
[    3.157376] sensor_register_slave:mpu6880_acc,id=25
[    3.157815] sensor_register_slave:mpu6500_acc,id=26
[    3.158266] sensor_register_slave:lsm330_acc,id=27
[    3.158705] sensor_register_slave:akm8975,id=31
[    3.159132] sensor_register_slave:akm8963,id=32
[    3.159549] sensor_register_slave:l3g4200d,id=46
[    3.159965] sensor_register_slave:l3g20d,id=47
[    3.160381] sensor_register_slave:ewtsa,id=48
[    3.160786] sensor_register_slave:lsm330_gyro,id=52
[    3.161236] sensor_register_slave:cm3217,id=54
[    3.161659] sensor_register_slave:cm3218,id=55
[    3.162685] i2c /dev entries driver
[    3.164948] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    3.165692] fan53555-reg: supplied by vcc5v0_sys
[    3.168588] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    3.169298] fan53555-reg: supplied by vcc5v0_sys
[    3.172231] rk808 0-001b: Pmic Chip id: 0x0
[    3.175716] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    3.176365] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    3.177044] DCDC_REG1: supplied by vcc3v3_sys
[    3.178384] DCDC_REG2: supplied by vcc3v3_sys
[    3.179497] DCDC_REG3: supplied by vcc3v3_sys
[    3.180312] DCDC_REG4: supplied by vcc3v3_sys
[    3.181310] LDO_REG1: supplied by vcc3v3_sys
[    3.182950] LDO_REG2: supplied by vcc3v3_sys
[    3.184474] LDO_REG3: supplied by vcc3v3_sys
[    3.185948] LDO_REG4: supplied by vcc3v3_sys
[    3.187479] LDO_REG5: supplied by vcc3v3_sys
[    3.188983] LDO_REG6: supplied by vcc3v3_sys
[    3.190520] LDO_REG7: supplied by vcc3v3_sys
[    3.192025] LDO_REG8: supplied by vcc3v3_sys
[    3.193551] SWITCH_REG1: supplied by vcc3v3_sys
[    3.194367] SWITCH_REG2: supplied by vcc3v3_sys
[    3.198098] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    3.199342] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009ac8000
[    3.201185] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009aca000
[    3.202753] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009acc000
[    3.204910] IR NEC protocol handler initialized
[    3.206457] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[    3.207047] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[    3.209964] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
[    3.210573] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[    3.213430] usbcore: registered new interface driver npu_acm
[    3.214034] usbcore: registered new interface driver uvcvideo
[    3.214560] USB Video Class driver (1.1.1)
[    3.217753] Boot mode: normal
[    3.220194] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    3.221193] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[    3.223435] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    3.224443] rtk_btusb: Realtek Bluetooth USB driver ver 3.1.a2fd257.20190430-133301
[    3.225143] rtk_btcoex: rtk_btcoex_init: version: 1.2
[    3.225596] rtk_btcoex: create workqueue
[    3.225945] rtk_btcoex: Coex over UDP
[    3.226626] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[    3.227261] usbcore: registered new interface driver rtk_btusb
[    3.227793] Bluetooth: Virtual HCI driver ver 1.5
[    3.228389] Bluetooth: HCI UART driver ver 2.3
[    3.228790] Bluetooth: HCI UART protocol H4 registered
[    3.229265] Bluetooth: HCI UART protocol LL registered
[    3.229719] Bluetooth: HCI UART protocol ATH3K registered
[    3.230304] usbcore: registered new interface driver bfusb
[    3.230865] usbcore: registered new interface driver btusb
[    3.232101] cpu cpu0: bin=1
[    3.232450] cpu cpu0: leakage=18
[    3.245519] cpu cpu0: temp=49375, pvtm=148811 (148283 + 528)
[    3.246385] cpu cpu0: pvtm-volt-sel=2
[    3.246792] cpu cpu0: bin-scale=34
[    3.247611] cpu cpu4: bin=1
[    3.247940] cpu cpu4: leakage=33
[    3.260996] cpu cpu4: temp=48750, pvtm=153799 (153554 + 245)
[    3.262555] cpu cpu4: pvtm-volt-sel=1
[    3.262950] cpu cpu4: bin-scale=17
[    3.264950] cpu cpu0: avs=0
[    3.265370] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.266395] cpu cpu0: failed to find power_model node
[    3.268193] cpu cpu4: avs=0
[    3.268593] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.270355] cpu cpu4: failed to find power_model node
[    3.271760] sdhci: Secure Digital Host Controller Interface driver
[    3.272316] sdhci: Copyright(c) Pierre Ossman
[    3.272715] Synopsys Designware Multimedia Card Interface Driver
[    3.274420] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    3.275081] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    3.275701] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    3.276267] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    3.277159] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.277964] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    3.278553] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    3.280240] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    3.280896] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    3.281525] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    3.282069] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    3.282954] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.283797] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    3.285298] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.287640] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    3.288183] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    3.306147] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    3.319045] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    3.321601] hidraw: raw HID events driver (C) Jiri Kosina
[    3.322921] usbcore: registered new interface driver usbhid
[    3.323459] usbhid: USB HID core driver
[    3.324238] inv_mpu_iio: inv_mpu_init:746
[    3.327986] usbcore: registered new interface driver snd-usb-audio
[    3.329635] rt5640 1-001c: Can not read property hp_det_gpio
[    3.330144] rt5640 1-001c: Can not read property: linein-mute.
[    3.349622] rk-hdmi-dp-sound hdmi-dp-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[    3.354104] NET: Registered protocol family 10
[    3.355505] NET: Registered protocol family 17
[    3.356204] Bluetooth: RFCOMM socket layer initialized
[    3.356709] Bluetooth: RFCOMM ver 1.11
[    3.357051] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.357594] Bluetooth: HIDP socket layer initialized
[    3.358074] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.358843] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    3.359346] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[    3.359962] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    3.360599] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    3.361332] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    3.362138] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    3.362776] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    3.363245] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    3.363715] [BT_RFKILL]: Enter rfkill_rk_init
[    3.364569] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    3.365062] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    3.365841] mmcblk0: mmc0:0001 TX2932 29.1 GiB
[    3.366359] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    3.366366] mmcblk0boot0: mmc0:0001 TX2932 partition 1 4.00 MiB
[    3.366756] mmcblk0boot1: mmc0:0001 TX2932 partition 2 4.00 MiB
[    3.367058] mmcblk0rpmb: mmc0:0001 TX2932 partition 3 4.00 MiB
[    3.368708] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[    3.369172]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    3.369846] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    3.370900] [BT_RFKILL]: Request irq for bt wakeup host
[    3.371427] [BT_RFKILL]: ** disable irq
[    3.371906] [BT_RFKILL]: bt_default device registered.
[    3.372500] Key type dns_resolver registered
[    3.373018] sensor_register_slave:mpu6880_gyro,id=51
[    3.373618] ov13850 1-0036: driver version: 00.01.03
[    3.373766] vendor storage:20190527 ret = 0
[    3.374864] ov13850 1-0036: could not get default pinstate
[    3.375357] ov13850 1-0036: could not get sleep pinstate
[    3.378250] ov13850 1-0036: write SCCB_ID failed
[    3.378842] ov13850: probe of 1-0036 failed with error -5
[    3.379448] ov13850 1-0046: driver version: 00.01.03
[    3.380385] ov13850 1-0046: could not get default pinstate
[    3.380868] ov13850 1-0046: could not get sleep pinstate
[    3.383123] ov13850 1-0046: write SCCB_ID failed
[    3.383632] ov13850: probe of 1-0046 failed with error -5
[    3.385065] Registered cp15_barrier emulation handler
[    3.385598] Registered setend emulation handler
[    3.386485] Loading compiled-in X.509 certificates
[    3.388561] Btrfs loaded
[    3.389514] rga2: Driver loaded successfully ver:3.2.18218
[    3.390228] rga2: Module initialized.
[    3.391496] mali ff9a0000.gpu: leakage=22
[    3.404560] mali ff9a0000.gpu: temp=50000, pvtm=124752 (124644 + 108)
[    3.405998] mali ff9a0000.gpu: pvtm-volt-sel=1
[    3.406770] mali ff9a0000.gpu: avs=0
[    3.407534] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    3.408300] mali ff9a0000.gpu: Protected mode not available
[    3.409287] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.410044] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    3.411139] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 423; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    3.412987] mali ff9a0000.gpu: Probed as mali0
[    3.417699] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    3.418418] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    3.419242] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    3.420036] xhci-hcd xhci-hcd.9.auto: irq 229, io mem 0xfe800000
[    3.420760] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.421367] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.422006] usb usb5: Product: xHCI Host Controller
[    3.422364] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
[    3.422378] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.422389] usb 2-1: Product: USB 2.0 Hub [MTT]
[    3.424073] usb usb5: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.424215] hub 2-1:1.0: USB hub found
[    3.424836] hub 2-1:1.0: 7 ports detected
[    3.425268] usb usb5: SerialNumber: xhci-hcd.9.auto
[    3.426207] hub 5-0:1.0: USB hub found
[    3.426566] hub 5-0:1.0: 1 port detected
[    3.427552] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    3.428215] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    3.428947] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.429744] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.430354] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.430994] usb usb6: Product: xHCI Host Controller
[    3.431439] usb usb6: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.431933] usb usb6: SerialNumber: xhci-hcd.9.auto
[    3.432831] hub 6-0:1.0: USB hub found
[    3.433212] hub 6-0:1.0: 1 port detected
[    3.440550] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    3.441424] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 7
[    3.442302] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    3.443152] xhci-hcd xhci-hcd.10.auto: irq 230, io mem 0xfe900000
[    3.443997] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    3.444620] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.445272] usb usb7: Product: xHCI Host Controller
[    3.445706] usb usb7: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.446220] usb usb7: SerialNumber: xhci-hcd.10.auto
[    3.447423] hub 7-0:1.0: USB hub found
[    3.447797] hub 7-0:1.0: 1 port detected
[    3.448624] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    3.449418] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 8
[    3.450206] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.451001] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    3.451612] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.452261] usb usb8: Product: xHCI Host Controller
[    3.452698] usb usb8: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.453201] usb usb8: SerialNumber: xhci-hcd.10.auto
[    3.454022] hub 8-0:1.0: USB hub found
[    3.454394] hub 8-0:1.0: 1 port detected
[    3.456089] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    3.456779] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    3.457387] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    3.457913] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    3.458787] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.459584] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    3.460141] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    3.461000] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    3.474305] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.487905] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    3.489671] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    3.490373] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    3.490973] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    3.491521] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    3.492401] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.493243] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    3.494203] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq
[    3.494870] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    3.495574] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    3.508953] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.522546] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    3.532978] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[    3.536460] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input1
[    3.538393]
[    3.538445] [dhd] dhd_module_init: in Dongle Host Driver, version 100.10.545.19 (r826445-20210324-3)
[    3.538449] [dhd] ======== dhd_wlan_init_plat_data ========
[    3.538451] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    3.538458] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=69, oob_irq_flags=0x414
[    3.538459] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[    3.538461] [dhd] dhd_wifi_platform_load: Enter
[    3.538464] [dhd] Power-up adapter 'DHD generic adapter'
[    3.538499] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[    3.538502] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[    3.538504] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    3.538507] [WLAN_RFKILL]: wifi turn on power. -1
[    3.544183] =======================================================
[    3.544734] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    3.545158] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.545776] =======================================================
[    3.546333] Realtek 8723DU USB WiFi driver (Powered by Rockchip) init.
[    3.546678] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.547401] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    3.547817] [WLAN_RFKILL]: wifi turn on power. -1
[    3.548198] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.548719] RTW: module init start
[    3.549021] RTW: rtl8723du v5.6.5.1_34252.20190703_COEX20181130-2e2e
[    3.549590] RTW: build time: May 17 2022 22:49:45
[    3.550005] RTW: rtl8723du BT-Coex version = COEX20181130-2e2e
[    3.550757] usbcore: registered new interface driver rtl8723du
[    3.551007] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.551769] RTW: module init ret=0
[    3.552670] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[    3.553902] ==gsl_ts_init==
[    3.554298] GSLX680 Enter gsl_ts_probe
[    3.554593] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[    3.555128] ==kzalloc success=
[    3.605870] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[    3.839344] [dhd] wifi_platform_bus_enumerate device present 1
[    3.839888] [dhd] ======== Card detection to detect SDIO card! ========
[    3.840537] mmc1:mmc host rescan start!
[    3.859355] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 223
[    3.871179] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    3.871762] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    3.889827] [dhd] bcmsdh_register: register client driver
[    3.891041] [dhd] bcmsdh_sdmmc_probe: Enter num=1
[    3.892099] [dhd] bcmsdh_sdmmc_probe: Enter num=2
[    3.892568] [dhd] bus num (host idx)=1, slot num (rca)=1
[    3.893048] [dhd] found adapter info 'DHD generic adapter'
[    3.894005] [dhd] sdioh_attach: set sd_f2_blocksize 256
[    3.894894] [dhd] sdioh_attach: sd clock rate = 0
[    3.897629] [dhd] dhdsdio_probe : no mutex held. set lock
[    3.898864] [dhd] F1 signature read @0x18000000=0x17224356
[    3.912440] [dhd] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[    3.915053] [dhd] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[    3.915996] [dhd] dhd_conf_set_chiprev : devid=0x4356, chip=0x4354, chiprev=2
[    3.918904] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.919677] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.920455] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.921807] [dhd] dhd_log_dump_init: kernel log buf size = 256KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 38KB
[    3.924612] [dhd] dhd_attach(): thread:dhd_watchdog_thread:c9 started
[    3.925479] [dhd] dhd_attach(): thread:dhd_dpc:ca started
[    3.926221] [dhd] dhd_attach(): thread:dhd_rxf:cb started
[    3.926723] [dhd] dhd_deferred_work_init: work queue initialized
[    3.927319] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[    3.928074] [dhd] get_mem_val_from_file: File [/data/misc/wifi/.memdump.info] doesn't exist
[    3.928877] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[    3.929425] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[    3.941889] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[    3.942608] [dhd] Dongle Host Driver, version 100.10.545.19 (r826445-20210324-3)
[    3.944599] [dhd] Register interface [wlan0]  MAC: d4:12:43:a0:3f:4c
[    3.944599]
[    3.945335] [dhd] dhdsdio_probe : the lock is released.
[    3.946024] [dhd] dhd_module_init: Exit err=0
[    4.423466] gsl_ts_probe--1375, i2c_master_recv fail
[    4.424083] ret=0
[    4.427010] rk808-rtc rk808-rtc: setting system clock to 2022-06-24 07:32:29 UTC (1656055949)
[    4.467332] vcc_mipi: disabling
[    4.467627] dvdd_1v2: disabling
[    4.472931] ret 1024
[    4.473838] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '22:48:03', on 'May 17 2022'.
[    4.476171] Mali: Mali device driver loaded
[    4.476876] rkisp1 ff910000.rkisp1: clear unready subdev num: 1
[    4.477891] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.478449] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.479002] rkisp1: update sensor failed
[    4.479367] rkisp1 ff920000.rkisp1: clear unready subdev num: 1
[    4.480344] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.480897] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.481462] rkisp1: update sensor failed
[    4.482501] ALSA device list:
[    4.482772]   #0: rk-hdmi-dp-sound
[    4.483075]   #1: rockchip,rt5640-codec
[    4.484031] Freeing unused kernel memory: 1216K
/dev/console is OK
NAME=Buildroot
VERSION=2018.02-rc3-g9286b22cf6
ID=buildroot
VERSION_ID=2018.02-rc3
PRETTY_NAME="Buildroot 2018.02-rc3"
Starting logging: OK
Populating /dev using udev: [    4.518837] udevd[223]: starting version 3.2.7
[    4.519514] random: udevd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
[    4.520472] random: udevd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
[    4.521305] random: udevd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
[    4.522141] random: udevd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
[    4.522981] random: udevd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
[    4.524940] udevd[223]: specified group 'kvm' unknown
[    4.529518] udevd[224]: starting eudev-3.2.7
[    4.540309] random: udevd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
[    4.541155] random: udevd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
[    4.541983] random: udevd: uninitialized urandom read (16 bytes read, 58 bits of entropy available)
[    4.543417] udevd[224]: specified group 'kvm' unknown
[    4.549352] random: udevd: uninitialized urandom read (16 bytes read, 59 bits of entropy available)
[    4.554979] random: udevd: uninitialized urandom read (16 bytes read, 59 bits of entropy available)
done
Initializing random number generator... done.
[    4.750441] EXT4-fs (mmcblk0p8): recovery complete
[    4.750875] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
Starting network: cmdline=storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  recovery androidboot.slot_suffix= androidboot.serialno=f48ee822a24c6f9f  ro rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1

read console from cmdline is /dev/ttyFIQ0
Starting recovery on Fri Jun 24 07:32:29 2022

failed to read font: res=-1, fall back to the compiled-in font
[    4.764087] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    4.764935] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
OK
Debug: configfs_init
[    4.786339] file system registered
[    4.790259] using random self ethernet address
[    4.790660] using random host ethernet address
[    4.793517] Mass Storage Function, version: 2009/09/11
[    4.793984] LUN: removable file: (no medium)
[    4.812274] read descriptors
[    4.812540] read strings
sh: write error: No such device
Starting input-event-daemon: input-event-daemon: Start parsing /etc/input-event-daemon.conf...
input-event-daemon: Adding device: /dev/input/event0...
input-event-daemon: Adding device: /dev/input/event1...
input-event-daemon: Adding device: /dev/input/event2...
input-event-daemon: Start listening on 3 devices...
done
/etc/init.d/rcS: line 28: alsactl: not found
[root@buildroot:/]# rotate degree: 0 - none, 1 - right, 2 - down, 3 - left.
current rotate degree is : 0
Ui upgrade
recovery filesystem table
=========================
  0 (null) /tmp ramdisk (null) (null) (null)
  1 /dev/root / ext2 rw,noauto 0 1
  2 proc /proc proc defaults 0 0
  3 devpts /dev/pts devpts defaults,gid=5,mode=620 0 0
  4 tmpfs /dev/shm tmpfs mode=0777 0 0
  5 tmpfs /tmp tmpfs mode=1777 0 0
  6 tmpfs /run tmpfs mode=0755,nosuid,nodev 0 0
  7 sysfs /sys sysfs defaults 0 0
  8 debug /sys/kernel/debug debugfs defaults 0 0
  9 pstore /sys/fs/pstore pstore defaults 0 0
  10 /dev/block/by-name/misc /misc emmc defaults 0 0
  11 /dev/block/by-name/oem /oem ext2 defaults 0 2
  12 /dev/block/by-name/userdata /userdata ext4 defaults 0 2

buf = /dev/block/by-name/misc
### get mount_ponit = /dev/block/by-name/misc ###
emmc_point is /dev/mmcblk0
sd_point is (null)
sd_point_2 is (null)
Recovery start....................
read cmdline
>>> Boot from non-SDcard
buf = /dev/block/by-name/misc
### get mount_ponit = /dev/block/by-name/misc ###
devices is not MTD.
I:Boot command: boot-recovery
I:Got arguments from boot message
buf = /dev/block/by-name/misc
### get mount_ponit = /dev/block/by-name/misc ###
devices is not MTD.
Command: "recovery" "--wipe_all"


Formatting /userdata...
No link to path!!!
No link to path!!!
format '/dev/block/by-name/userdata' to ext4 filesystem
executing '/sbin/mke2fs'
[   10.790872] random: nonblocking pool is initialized
executed '/sbin/mke2fs' done
executed '/sbin/mke2fs' return 0
executing '/sbin/e2fsck'
e2fsck 1.43.9 (8-Feb-2018)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/by-name/userdata: 11/1703936 files (0.0% non-contiguous), 151005/6807547 blocks
executed '/sbin/e2fsck' done
executed '/sbin/e2fsck' return 0
[  105.578352] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts:
Data wipe done.
resize oem done.
No link to path!!!
E:Can't open /tmp/recovery.log
No link to path!!!
E:Can't open /tmp/recovery.log
buf = /dev/block/by-name/misc
### get mount_ponit = /dev/block/by-name/misc ###
devices is not MTD.
No link to path!!!
Rebooting...
Reboot...
[  107.608149] kvm: exiting hardware virtualization
[  107.608672] cpu cpu4: min=816000, max=816000
[  107.610155] cpu cpu0: min=816000, max=816000
[  107.631079] I : [File] : drivers/gpu/arm/midgard/platform/rk/mali_kbase_config_rk.c; [Line] : 274; [Func] : kbase_platform_rk_shutdown(); to make vdd_gpu enabled for turning off pd_gpu in pm_framework.
[  107.632687] rk-vcodec ff660000.rkvdec: shutdown
[  107.633102] rk-vcodec ff650000.vpu_service: shutdown
[  107.643141] rk808->stby_gpio(56) = low
[  107.643514] rk808->hold_gpio(45) = low
[  107.847586] reboot: Restarting system
DDR Version 1.26 20210628
In
soft reset
SRX
channel 0
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
change freq to 416MHz 0,1
Channel 0: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
Channel 1: LPDDR4,416MHz
Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
256B stride
channel 0
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 1
CS = 0
MR0=0x98
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
CS = 1
MR0=0x18
MR4=0x2
MR5=0xFF
MR8=0x8
MR12=0x72
MR14=0x72
MR18=0x0
MR19=0x0
MR24=0x8
MR25=0x0
channel 0 training pass!
channel 1 training pass!
channel 0, cs 0, advanced training done
channel 0, cs 1, advanced training done
channel 1, cs 0, advanced training done
channel 1, cs 1, advanced training done
change freq to 856MHz 1,0
ch 0 ddrconfig = 0x101, ddrsize = 0x2020
ch 1 ddrconfig = 0x101, ddrsize = 0x2020
pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
ddr_set_rate to 328MHZ
ddr_set_rate to 666MHZ
ddr_set_rate to 416MHZ, ctl_index 0
ddr_set_rate to 856MHZ, ctl_index 1
support 416 856 328 666 MHz, current 856MHz
OUT
Boot1 Release Time: May 29 2020 17:36:36, version: 1.26
CPUId = 0x0
ChipType = 0x10, 438
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=29844MB
FwPartOffset=2000 , 100000
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
mmc0:cmd8,20
mmc0:cmd5,20
mmc0:cmd55,20
mmc0:cmd1,20
SdmmcInit=0 1
StorageInit ok = 68792
SecureMode = 0
SecureInit read PBA: 0x4
SecureInit read PBA: 0x404
SecureInit read PBA: 0x804
SecureInit read PBA: 0xc04
SecureInit read PBA: 0x1004
SecureInit read PBA: 0x1404
SecureInit read PBA: 0x1804
SecureInit read PBA: 0x1c04
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:            uboot, start:0x4000, size:0x2000
GPT part:  1, name:            trust, start:0x6000, size:0x2000
GPT part:  2, name:             misc, start:0x8000, size:0x2000
GPT part:  3, name:             boot, start:0xa000, size:0x20000
GPT part:  4, name:         recovery, start:0x2a000, size:0x20000
GPT part:  5, name:           backup, start:0x4a000, size:0x10000
GPT part:  6, name:           rootfs, start:0x5a000, size:0x600000
GPT part:  7, name:         userdata, start:0x65a000, size:0x33effdf
find part:uboot OK. first_lba:0x4000.
find part:trust OK. first_lba:0x6000.
Trust Addr:0x6000, 0x58334c42
No find bl30.bin
Load uboot, ReadLba = 4000
Load OK, addr=0x200000, size=0xe70b0
RunBL31 0x40000 @ 112563 us
NOTICE:  BL31: v1.3(release):845ee93
NOTICE:  BL31: Built : 15:51:11, Jul 22 2020
NOTICE:  BL31: Rockchip release version: v1.1
INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    plat_rockchip_pmu_init(1196): pd status 3e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
INF [0x0] TEE-CORE:init_primary_helper:337: Initializing (1.1.0-278-gef70f120a #zhangzj #9 Fri Sep 17 09:39:24 UTC 2021 aarch64)

INF [0x0] TEE-CORE:init_primary_helper:338: Release version: 1.2

INF [0x0] TEE-CORE:init_teecore:83: teecore inits done
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-g948c63a14e #zhang (Jun 23 2022 - 23:17:27 -0700)

Model: Firefly-RK3399 Board
PreSerial: 2
DRAM:  3.8 GiB
Sysmem: init
Relocation Offset: f5bdd000, fdt: f3dd14d8
Using default environment

dwmmc@fe320000: 1, sdhci@fe330000: 0
Bootdev(atags): mmc 0
MMC0: HS400, 50Mhz
PartType: EFI
boot mode: normal
Found DTB in boot part
DTB: rk-kernel.dtb
HASH(c): OK
Android header version 0
I2c0 speed: 400000Hz
PMIC:  RK808
vdd_center 900000 uV
vdd_cpu_l 900000 uV
vdd_log 1100000 uV
In:    serial
Out:   serial
Err:   serial
Model: AIO-3399J Board (Linux Opensource)
Rockchip UBOOT DRM driver version: v1.0.1
xfer: num: 2, addr: 0x50
xfer: num: 2, addr: 0x50
Monitor has basic audio support
Could not find baseparameter partition
mode:1920x1080
Detailed mode clock 148500 kHz, flags[5]
    H: 1920 2008 2052 2200
    V: 1080 1084 1089 1125
bus_format: 100a
CEA mode used vic=16
final pixclk = 148500000 tmdsclk = 148500000
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
PHY powered down in 0 iterations
PHY PLL locked 1 iterations
sink has audio support
hdmi_set_clk_regenerator: fs=48000Hz ftdms=148.500MHz N=6144 cts=148500
CLK: (uboot. arml: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
CLK: (uboot. armb: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  aplll 816000 KHz
  apllb 816000 KHz
  dpll 856000 KHz
  cpll 24000 KHz
  gpll 800000 KHz
  npll 600000 KHz
  vpll 148000 KHz
  aclk_perihp 133333 KHz
  hclk_perihp 66666 KHz
  pclk_perihp 33333 KHz
  aclk_perilp0 266666 KHz
  hclk_perilp0 88888 KHz
  pclk_perilp0 44444 KHz
  hclk_perilp1 100000 KHz
  pclk_perilp1 50000 KHz
Net:   eth0: ethernet@fe300000
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "(none)"
Booting IMAGE kernel at 0x00280000 with fdt at 0x08300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x0027f800 ...
Kernel load addr 0x00280000 size 23035 KiB
RAM disk load addr 0x0a200000 size 8657 KiB
## Flattened Device Tree blob at 08300000
   Booting using the fdt blob at 0x8300000
   XIP Kernel Image from 0x00280000 to 0x00280000 ... OK
  'reserved-memory' ramoops@110000: addr=110000 size=f0000
   Using Device Tree in place at 0000000008300000, end 000000000831c6fa
No file: logo_kernel.bmp
logo_bmp uncompressed size=127818
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x0a200000 - 0xf8000000 (size: 0xede00000)
Total: 3208.135 ms

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.4.194+ (zhang@ubuntu) (firefly: 2c8b0d223c45454b8f8c0dc5cfd6bf2816a0a606) (gcc version 6.3.1 20170404 (Linaro GCC 6.3-2017.05) ) #3 SMP Thu Jun 23 23:17:57 PDT 2022
[    0.000000] Boot CPU: AArch64 Processor [410fd034]
[    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.0 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc0f7ecb000 s46056 r8192 d31768 u86016
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 991752
[    0.000000] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.slot_suffix= androidboot.serialno=f48ee822a24c6f9f  ro rootwait earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 console=ttyFIQ0 root=PARTLABEL=rootfs rootfstype=ext4 overlayroot=device:dev=PARTLABEL=userdata,fstype=ext4,mkfs=1 coherent_pool=1m systemd.gpt_auto=0 cgroup_enable=memory swapaccount=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] software IO TLB: mapped [mem 0xf7e83000-0xf7ec3000] (0MB)
[    0.000000] Memory: 3923388K/4030464K available (14462K kernel code, 1786K rwdata, 5504K rodata, 1216K init, 765K bss, 107076K reserved, 0K cma-reserved)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
[    0.000000]     vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
[    0.000000]       .init : 0xffffff8009410000 - 0xffffff8009540000   (  1216 KB)
[    0.000000]       .text : 0xffffff8008080000 - 0xffffff8008ea0000   ( 14464 KB)
[    0.000000]     .rodata : 0xffffff8008ea0000 - 0xffffff8009410000   (  5568 KB)
[    0.000000]       .data : 0xffffff8009540000 - 0xffffff80096fe808   (  1787 KB)
[    0.000000]     vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
[    0.000000]               0xffffffbdc0008000 - 0xffffffbdc3e00000   (    61 MB actual)
[    0.000000]     fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
[    0.000000]     PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
[    0.000000]     memory  : 0xffffffc000200000 - 0xffffffc0f8000000   (  3966 MB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]  Build-time adjustment of leaf fanout to 64.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[    0.000000] NR_IRQS:64 nr_irqs:64 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[    0.000000] ITS: allocated 65536 Devices @f2d00000 (psz 64K, shr 0)
[    0.000000] ITS: using cache flushing for cmd queue
[    0.000000] GIC: using LPI property table @0x00000000f2c90000
[    0.000000] ITS: Allocated 1792 chunks for LPIs
[    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[    0.000000] CPU0: using LPI pending table @0x00000000f2ca0000
[    0.000000] GIC: using cache flushing for LPI property table
[    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.002211] Console: colour dummy device 80x25
[    0.002651] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[    0.003638] pid_max: default: 32768 minimum: 301
[    0.004164] Security Framework initialized
[    0.004627] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.005267] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.006699] Initializing cgroup subsys io
[    0.007107] Initializing cgroup subsys memory
[    0.007548] Initializing cgroup subsys devices
[    0.007979] Initializing cgroup subsys freezer
[    0.008419] Initializing cgroup subsys net_cls
[    0.008849] Initializing cgroup subsys perf_event
[    0.009303] Initializing cgroup subsys net_prio
[    0.009755] Initializing cgroup subsys hugetlb
[    0.010182] Initializing cgroup subsys pids
[    0.010598] ftrace: allocating 51841 entries in 203 pages
[    0.134304] sched-energy: Sched-energy-costs installed from DT
[    0.134868] CPU0: update cpu_capacity 401
[    0.135306] ASID allocator initialised with 32768 entries
[    0.139049] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.140398] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[    0.142678] Detected VIPT I-cache on CPU1
[    0.142714] CPU1: found redistributor 1 region 0:0x00000000fef20000
[    0.142744] CPU1: using LPI pending table @0x00000000f2f50000
[    0.142797] CPU1: update cpu_capacity 401
[    0.142801] CPU1: Booted secondary processor [410fd034]
[    0.143596] Detected VIPT I-cache on CPU2
[    0.143627] CPU2: found redistributor 2 region 0:0x00000000fef40000
[    0.143657] CPU2: using LPI pending table @0x00000000f2f80000
[    0.143707] CPU2: update cpu_capacity 401
[    0.143711] CPU2: Booted secondary processor [410fd034]
[    0.144461] Detected VIPT I-cache on CPU3
[    0.144492] CPU3: found redistributor 3 region 0:0x00000000fef60000
[    0.144521] CPU3: using LPI pending table @0x00000000f2fd0000
[    0.144568] CPU3: update cpu_capacity 401
[    0.144572] CPU3: Booted secondary processor [410fd034]
[    0.145362] Detected PIPT I-cache on CPU4
[    0.145387] CPU4: found redistributor 100 region 0:0x00000000fef80000
[    0.145422] CPU4: using LPI pending table @0x00000000f2410000
[    0.145455] CPU4: update cpu_capacity 1024
[    0.145458] CPU4: Booted secondary processor [410fd082]
[    0.146128] Detected PIPT I-cache on CPU5
[    0.146153] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[    0.146188] CPU5: using LPI pending table @0x00000000f2440000
[    0.146221] CPU5: update cpu_capacity 1024
[    0.146225] CPU5: Booted secondary processor [410fd082]
[    0.146318] Brought up 6 CPUs
[    0.158668] SMP: Total of 6 processors activated.
[    0.159119] CPU features: detected feature: GIC system register CPU interface
[    0.159807] CPU features: detected feature: 32-bit EL0 Support
[    0.160365] CPU: All CPU(s) started at EL2
[    0.160794] alternatives: patching kernel code
[    0.162579] devtmpfs: initialized
[    0.188444] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.189400] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.190376] xor: measuring software checksum speed
[    0.200783]    8regs     :  2860.000 MB/sec
[    0.210838]    8regs_prefetch:  2564.000 MB/sec
[    0.220891]    32regs    :  3208.000 MB/sec
[    0.230948]    32regs_prefetch:  2848.000 MB/sec
[    0.231397] xor: using function: 32regs (3208.000 MB/sec)
[    0.231926] pinctrl core: initialized pinctrl subsystem
[    0.234096] Failed to find legacy iommu devices
[    0.234906] NET: Registered protocol family 16
[    0.240560] cpuidle: using governor ladder
[    0.244568] cpuidle: using governor menu
[    0.244959] Registered FIQ tty driver
[    0.245841] vdso: 2 pages (1 code @ ffffff8008ea6000, 1 data @ ffffff8009544000)
[    0.246576] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.247647] DMA: preallocated 1024 KiB pool for atomic allocations
[    0.271931] console [pstore-1] enabled
[    0.272295] pstore: Registered ramoops as persistent store backend
[    0.272894] ramoops: attached 0xf0000@0x110000, ecc: 0/0
[    0.275881] console [ttyFIQ0] enabled
[    0.275881] console [ttyFIQ0] enabled
[    0.276573] bootconsole [uart0] disabled
[    0.276573] bootconsole [uart0] disabled
[    0.277506] Registered fiq debugger ttyFIQ0
[    0.328520] raid6: int64x1  gen()   468 MB/s
[    0.345609] raid6: int64x1  xor()   429 MB/s
[    0.362720] raid6: int64x2  gen()   675 MB/s
[    0.379784] raid6: int64x2  xor()   599 MB/s
[    0.396916] raid6: int64x4  gen()   976 MB/s
[    0.413988] raid6: int64x4  xor()   677 MB/s
[    0.431043] raid6: int64x8  gen()   792 MB/s
[    0.448151] raid6: int64x8  xor()   634 MB/s
[    0.465229] raid6: neonx1   gen()   964 MB/s
[    0.482319] raid6: neonx1   xor()   681 MB/s
[    0.499416] raid6: neonx2   gen()  1273 MB/s
[    0.516515] raid6: neonx2   xor()   962 MB/s
[    0.533612] raid6: neonx4   gen()  1730 MB/s
[    0.550705] raid6: neonx4   xor()  1177 MB/s
[    0.567804] raid6: neonx8   gen()  1691 MB/s
[    0.584874] raid6: neonx8   xor()  1248 MB/s
[    0.585259] raid6: using algorithm neonx4 gen() 1730 MB/s
[    0.585742] raid6: .... xor() 1177 MB/s, rmw enabled
[    0.586183] raid6: using intx1 recovery algorithm
[    0.591138] iommu: Adding device ff650000.vpu_service to group 0
[    0.591765] iommu: Adding device ff660000.rkvdec to group 1
[    0.592371] iommu: Adding device ff8f0000.vop to group 2
[    0.592940] iommu: Adding device ff900000.vop to group 3
[    0.593502] iommu: Adding device ff910000.rkisp1 to group 4
[    0.594096] iommu: Adding device ff920000.rkisp1 to group 5
[    0.595076] rk_iommu ff650800.iommu: can't get sclk
[    0.595756] rk_iommu ff660480.iommu: can't get sclk
[    0.596410] rk_iommu ff8f3f00.iommu: can't get sclk
[    0.597005] rk_iommu ff903f00.iommu: can't get sclk
[    0.597605] rk_iommu ff914000.iommu: can't get sclk
[    0.598197] rk_iommu ff924000.iommu: can't get sclk
[    0.598981] SCSI subsystem initialized
[    0.599657] usbcore: registered new interface driver usbfs
[    0.600184] usbcore: registered new interface driver hub
[    0.600751] usbcore: registered new device driver usb
[    0.601272] media: Linux media interface: v0.10
[    0.601724] Linux video capture interface: v2.00
[    0.602211] pps_core: LinuxPPS API ver. 1 registered
[    0.602654] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.603484] PTP clock support registered
[    0.604973] Advanced Linux Sound Architecture Driver Initialized.
[    0.606035] Bluetooth: Core ver 2.21
[    0.606379] NET: Registered protocol family 31
[    0.606786] Bluetooth: HCI device and connection manager initialized
[    0.607349] Bluetooth: HCI socket layer initialized
[    0.607790] Bluetooth: L2CAP socket layer initialized
[    0.608278] Bluetooth: SCO socket layer initialized
[    0.609067] NetLabel: Initializing
[    0.609374] NetLabel:  domain hash size = 128
[    0.609758] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.610240] NetLabel:  unlabeled traffic allowed by default
[    0.610878] nfc: nfc_init: NFC Core ver 0.1
[    0.611296] NET: Registered protocol family 39
[    0.611803] rockchip-cpuinfo cpuinfo: Serial         : f48ee822a24c6f9f
[    0.613147] clocksource: Switched to clocksource arch_sys_counter
[    0.666042] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[    0.666983] NET: Registered protocol family 2
[    0.667821] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.668729] TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
[    0.670249] TCP: Hash tables configured (established 32768 bind 32768)
[    0.670944] UDP hash table entries: 2048 (order: 5, 196608 bytes)
[    0.671701] UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
[    0.672636] NET: Registered protocol family 1
[    0.673318] RPC: Registered named UNIX socket transport module.
[    0.673842] RPC: Registered udp transport module.
[    0.674278] RPC: Registered tcp transport module.
[    0.674697] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.675941] Trying to unpack rootfs image as initramfs...
[    1.094358] Freeing initrd memory: 8656K
[    1.095467] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[    1.096283] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[    1.098275] kvm [1]: 8-bit VMID
[    1.098560] kvm [1]: Hyp mode initialized successfully
[    1.099129] kvm [1]: interrupt-controller@fff20000 IRQ10
[    1.099810] kvm [1]: timer IRQ12
[    1.102878] audit: initializing netlink subsys (disabled)
[    1.103404] audit: type=2000 audit(1.013:1): initialized
[    1.104304] Initialise system trusted keyring
[    1.105039] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.113883] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.115371] NFS: Registering the id_resolver key type
[    1.115848] Key type id_resolver registered
[    1.116236] Key type id_legacy registered
[    1.116610] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    1.117912] ntfs: driver 2.1.32 [Flags: R/O].
[    1.118695] fuse init (API version 7.23)
[    1.119411] SGI XFS with security attributes, no debug enabled
[    1.125373] NET: Registered protocol family 38
[    1.125797] Key type asymmetric registered
[    1.126209] Asymmetric key parser 'x509' registered
[    1.126815] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.127611] io scheduler noop registered
[    1.127967] io scheduler deadline registered
[    1.128401] io scheduler cfq registered (default)
[    1.130381] phy phy-ff770000.syscon:usb2-phy@e450.1: Failed to get VBUS supply regulator
[    1.132077] phy phy-ff770000.syscon:usb2-phy@e460.3: Failed to get VBUS supply regulator
[    1.137580] ace test_init function.
[    1.138066] ace test_init end.ret=0
[    1.138772] radar end.ret=0
[    1.141554] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[    1.142163] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[    1.142759] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[    1.143339] rockchip-pcie f8000000.pcie: missing "memory-region" property
[    1.143948] PCI host bridge /pcie@f8000000 ranges:
[    1.144401]   MEM 0xfa000000..0xfbdfffff -> 0xfa000000
[    1.144860]    IO 0xfbe00000..0xfbefffff -> 0xfbe00000
[    1.687193] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[    1.687808] rockchip-pcie f8000000.pcie: deferred probe failed
[    1.688560] rockchip-pcie: probe of f8000000.pcie failed with error -110
[    1.690058] Module initialized.
[    1.690822] rk-vcodec ff650000.vpu_service: no regulator for vcodec
[    1.691691] rk-vcodec ff650000.vpu_service: probe device
[    1.692413] rk-vcodec ff650000.vpu_service: drm allocator with mmu enabled
[    1.693579] rk-vcodec ff650000.vpu_service: could not find power_model node
[    1.694215] rk-vcodec ff650000.vpu_service: init success
[    1.694939] rk-vcodec ff660000.rkvdec: no regulator for vcodec
[    1.695888] rk-vcodec ff660000.rkvdec: probe device
[    1.696535] rk-vcodec ff660000.rkvdec: drm allocator with mmu enabled
[    1.697490] rk-vcodec ff660000.rkvdec: could not find power_model node
[    1.698072] rk-vcodec ff660000.rkvdec: init success
[    1.699963] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.700652] dma-pl330 ff6d0000.dma-controller:       DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[    1.702905] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    1.703592] dma-pl330 ff6e0000.dma-controller:       DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.705449] rockchip-system-monitor rockchip-system-monitor: system monitor probe
[    1.706672] pwm-regulator: supplied by vcc5v0_sys
[    1.707791] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[    1.708958] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 35, base_baud = 1500000) is a 16550A
[    1.711521] [drm] Initialized drm 1.1.0 20060810
[    1.715695] [drm] Rockchip DRM driver version: v1.0.1
[    1.716491] rockchip-drm display-subsystem: dmc is disabled
[    1.717291] rockchip-vop ff900000.vop: missing rockchip,grf property
[    1.718113] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008f6b238)
[    1.718867] rockchip-vop ff8f0000.vop: missing rockchip,grf property
[    1.719629] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008f6b238)
[    1.720592] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[    1.721195] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[    1.721976] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[    1.723656] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008f5f548)
[    1.724390] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.724980] [drm] No driver support for vblank timestamp query.
[    2.582081] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 2560x1440p60, type: 11
[    2.602365] dwhdmi-rockchip ff940000.hdmi: Rate 241500000 missing; compute N dynamically
[    2.609517] Freeing drm_logo memory: 1236K
[    2.686962] Console: switching to colour frame buffer device 320x90
[    2.744947] rockchip-drm display-subsystem: fb0:  frame buffer device
[    2.753899] mali ff9a0000.gpu: Failed to get regulator
[    2.754370] mali ff9a0000.gpu: Power control initialization failed
[    2.755373] Unable to detect cache hierarchy for CPU 0
[    2.756596] brd: module loaded
[    2.762267] loop: module loaded
[    2.763081] zram: Added device: zram0
[    2.763740] lkdtm: No crash points registered, enable through debugfs
[    2.764666] Loading dl1825 driver
[    2.766581] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
[    2.768505] tun: Universal TUN/TAP device driver, 1.6
[    2.768960] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.770481] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
[    2.771207] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[    2.771837] rk_gmac-dwmac fe300000.ethernet: TX delay(0x31).
[    2.772350] rk_gmac-dwmac fe300000.ethernet: RX delay(0x24).
[    2.772868] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[    2.773591] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
[    2.774214] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[    2.779767] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[    2.780387] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    2.780839]  Ring mode enabled
[    2.781120]  DMA HW capability register supported
[    2.781536]  Normal descriptors
[    2.781842]  RX Checksum Offload Engine supported (type 2)
[    2.782335]  Wake-Up On Lan supported
[    2.782699]  Enable RX Mitigation via HW Watchdog Timer
[    2.922077] libphy: stmmac: probed
[    2.922415] eth%d: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
[    2.922986] eth%d: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
[    2.923521] eth%d: PHY ID 0000ffff at 2 IRQ POLL (stmmac-0:02)
[    2.924045] eth%d: PHY ID 0000ffff at 3 IRQ POLL (stmmac-0:03)
[    2.924579] eth%d: PHY ID 0000ffff at 4 IRQ POLL (stmmac-0:04)
[    2.925102] eth%d: PHY ID 0000ffff at 5 IRQ POLL (stmmac-0:05)
[    2.925635] eth%d: PHY ID 0000ffff at 6 IRQ POLL (stmmac-0:06)
[    2.926177] eth%d: PHY ID 0000ffff at 7 IRQ POLL (stmmac-0:07)
[    2.926701] eth%d: PHY ID 0000ffff at 8 IRQ POLL (stmmac-0:08)
[    2.927234] eth%d: PHY ID 0000ffff at 9 IRQ POLL (stmmac-0:09)
[    2.927758] eth%d: PHY ID 0000ffff at 10 IRQ POLL (stmmac-0:0a)
[    2.928291] eth%d: PHY ID 0000ffff at 11 IRQ POLL (stmmac-0:0b)
[    2.928815] eth%d: PHY ID 0000ffff at 12 IRQ POLL (stmmac-0:0c)
[    2.929349] eth%d: PHY ID 0000ffff at 13 IRQ POLL (stmmac-0:0d)
[    2.929873] eth%d: PHY ID 0000ffff at 14 IRQ POLL (stmmac-0:0e)
[    2.930407] eth%d: PHY ID 0000ffff at 15 IRQ POLL (stmmac-0:0f)
[    2.930931] eth%d: PHY ID 0000ffff at 16 IRQ POLL (stmmac-0:10)
[    2.931465] eth%d: PHY ID 0000ffff at 17 IRQ POLL (stmmac-0:11)
[    2.931988] eth%d: PHY ID 0000ffff at 18 IRQ POLL (stmmac-0:12)
[    2.932522] eth%d: PHY ID 0000ffff at 19 IRQ POLL (stmmac-0:13)
[    2.933046] eth%d: PHY ID 0000ffff at 20 IRQ POLL (stmmac-0:14)
[    2.933579] eth%d: PHY ID 0000ffff at 21 IRQ POLL (stmmac-0:15)
[    2.934102] eth%d: PHY ID 0000ffff at 22 IRQ POLL (stmmac-0:16)
[    2.934636] eth%d: PHY ID 0000ffff at 23 IRQ POLL (stmmac-0:17)
[    2.935175] eth%d: PHY ID 0000ffff at 24 IRQ POLL (stmmac-0:18)
[    2.935699] eth%d: PHY ID 0000ffff at 25 IRQ POLL (stmmac-0:19)
[    2.936233] eth%d: PHY ID 0000ffff at 26 IRQ POLL (stmmac-0:1a)
[    2.936757] eth%d: PHY ID 0000ffff at 27 IRQ POLL (stmmac-0:1b)
[    2.937290] eth%d: PHY ID 0000ffff at 28 IRQ POLL (stmmac-0:1c)
[    2.937814] eth%d: PHY ID 0000ffff at 29 IRQ POLL (stmmac-0:1d)
[    2.938347] eth%d: PHY ID 0000ffff at 30 IRQ POLL (stmmac-0:1e)
[    2.938871] eth%d: PHY ID 0000ffff at 31 IRQ POLL (stmmac-0:1f)
[    2.941590] usbcore: registered new interface driver rtl8192cu
[    2.942189] usbcore: registered new interface driver rndis_wlan
[    2.942971] usbcore: registered new interface driver mt7601u
[    2.943601] Rockchip WiFi SYS interface (V1.00) ...
[    2.944126] usbcore: registered new interface driver rtl8150
[    2.944698] usbcore: registered new interface driver r8152
[    2.945254] usbcore: registered new interface driver asix
[    2.945783] usbcore: registered new interface driver ax88179_178a
[    2.946416] usbcore: registered new interface driver cdc_ether
[    2.946989] usbcore: registered new interface driver rndis_host
[    2.947606] usbcore: registered new interface driver cdc_ncm
[    2.948166] usbcore: registered new interface driver qmi_wwan
[    2.948728] usbcore: registered new interface driver cdc_mbim
[    2.954817] rockchip-dwc3 usb0: fail to get drvdata hcd
[    2.960335] rockchip-dwc3 usb1: fail to get drvdata hcd
[    2.962620] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.963241] ehci-pci: EHCI PCI platform driver
[    2.963705] ehci-platform: EHCI generic platform driver
[    2.967918] ehci-platform fe380000.usb: EHCI Host Controller
[    2.968591] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
[    2.969422] ehci-platform fe380000.usb: irq 28, io mem 0xfe380000
[    2.975178] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[    2.975895] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.976516] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.977165] usb usb1: Product: EHCI Host Controller
[    2.977598] usb usb1: Manufacturer: Linux 4.4.194+ ehci_hcd
[    2.978098] usb usb1: SerialNumber: fe380000.usb
[    2.978958] hub 1-0:1.0: USB hub found
[    2.979357] hub 1-0:1.0: 1 port detected
[    2.983182] ehci-platform fe3c0000.usb: EHCI Host Controller
[    2.983832] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
[    2.984634] ehci-platform fe3c0000.usb: irq 30, io mem 0xfe3c0000
[    2.991173] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[    2.991867] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.992486] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.993124] usb usb2: Product: EHCI Host Controller
[    2.993567] usb usb2: Manufacturer: Linux 4.4.194+ ehci_hcd
[    2.994066] usb usb2: SerialNumber: fe3c0000.usb
[    2.994910] hub 2-0:1.0: USB hub found
[    2.995309] hub 2-0:1.0: 1 port detected
[    2.996231] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    2.996791] ohci-platform: OHCI generic platform driver
[    2.997566] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
[    2.998327] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
[    2.999102] ohci-platform fe3a0000.usb: irq 29, io mem 0xfe3a0000
[    3.054308] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    3.054914] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.055566] usb usb3: Product: Generic Platform OHCI controller
[    3.056090] usb usb3: Manufacturer: Linux 4.4.194+ ohci_hcd
[    3.056599] usb usb3: SerialNumber: fe3a0000.usb
[    3.057446] hub 3-0:1.0: USB hub found
[    3.057811] hub 3-0:1.0: 1 port detected
[    3.058734] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[    3.059485] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
[    3.060287] ohci-platform fe3e0000.usb: irq 31, io mem 0xfe3e0000
[    3.115378] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    3.115989] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.116644] usb usb4: Product: Generic Platform OHCI controller
[    3.117181] usb usb4: Manufacturer: Linux 4.4.194+ ohci_hcd
[    3.117683] usb usb4: SerialNumber: fe3e0000.usb
[    3.118746] hub 4-0:1.0: USB hub found
[    3.119120] hub 4-0:1.0: 1 port detected
[    3.120868] usbcore: registered new interface driver cdc_acm
[    3.121383] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.122191] usbcore: registered new interface driver cdc_wdm
[    3.122757] usbcore: registered new interface driver uas
[    3.123403] usbcore: registered new interface driver usb-storage
[    3.124032] usbcore: registered new interface driver usbserial
[    3.124614] usbcore: registered new interface driver usbserial_generic
[    3.125265] usbserial: USB Serial support registered for generic
[    3.125857] usbcore: registered new interface driver ch341
[    3.126409] usbserial: USB Serial support registered for ch341-uart
[    3.127019] usbcore: registered new interface driver cp210x
[    3.127562] usbserial: USB Serial support registered for cp210x
[    3.128192] usbcore: registered new interface driver ftdi_sio
[    3.128732] usbserial: USB Serial support registered for FTDI USB Serial Device
[    3.129631] usbcore: registered new interface driver keyspan
[    3.130176] usbserial: USB Serial support registered for Keyspan - (without firmware)
[    3.130903] usbserial: USB Serial support registered for Keyspan 1 port adapter
[    3.131593] usbserial: USB Serial support registered for Keyspan 2 port adapter
[    3.132284] usbserial: USB Serial support registered for Keyspan 4 port adapter
[    3.132990] usbcore: registered new interface driver option
[    3.133538] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.134490] usbcore: registered new interface driver oti6858
[    3.135019] usbserial: USB Serial support registered for oti6858
[    3.135633] usbcore: registered new interface driver pl2303
[    3.136176] usbserial: USB Serial support registered for pl2303
[    3.136766] usbcore: registered new interface driver qcserial
[    3.137322] usbserial: USB Serial support registered for Qualcomm USB modem
[    3.138019] usbcore: registered new interface driver sierra
[    3.138563] usbserial: USB Serial support registered for Sierra USB modem
[    3.141019] usbcore: registered new interface driver usbtouchscreen
[    3.142092] .. rk pwm remotectl v1.1 init
[    3.142792] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
[    3.144014] sensor_register_slave:mma8452,id=17
[    3.144481] sensor_register_slave:lis3dh,id=7
[    3.144887] sensor_register_slave:mma7660,id=18
[    3.145317] sensor_register_slave:lsm303d,id=23
[    3.145734] sensor_register_slave:gs_mc3230,id=24
[    3.146163] [Gsensor]   gsensor_init
[    3.146500] sensor_register_slave:mpu6880_acc,id=25
[    3.146940] sensor_register_slave:mpu6500_acc,id=26
[    3.147421] sensor_register_slave:lsm330_acc,id=27
[    3.147861] sensor_register_slave:akm8975,id=31
[    3.148291] sensor_register_slave:akm8963,id=32
[    3.148708] sensor_register_slave:l3g4200d,id=46
[    3.149150] sensor_register_slave:l3g20d,id=47
[    3.149556] sensor_register_slave:ewtsa,id=48
[    3.149960] sensor_register_slave:lsm330_gyro,id=52
[    3.150436] sensor_register_slave:cm3217,id=54
[    3.150843] sensor_register_slave:cm3218,id=55
[    3.151873] i2c /dev entries driver
[    3.154067] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[    3.154810] fan53555-reg: supplied by vcc5v0_sys
[    3.157660] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[    3.158367] fan53555-reg: supplied by vcc5v0_sys
[    3.161291] rk808 0-001b: Pmic Chip id: 0x0
[    3.164772] rk808-regulator rk808-regulator: there is no dvs0 gpio
[    3.165419] rk808-regulator rk808-regulator: there is no dvs1 gpio
[    3.166103] DCDC_REG1: supplied by vcc3v3_sys
[    3.167442] DCDC_REG2: supplied by vcc3v3_sys
[    3.168557] DCDC_REG3: supplied by vcc3v3_sys
[    3.169371] DCDC_REG4: supplied by vcc3v3_sys
[    3.170366] LDO_REG1: supplied by vcc3v3_sys
[    3.171982] LDO_REG2: supplied by vcc3v3_sys
[    3.173503] LDO_REG3: supplied by vcc3v3_sys
[    3.174996] LDO_REG4: supplied by vcc3v3_sys
[    3.176546] LDO_REG5: supplied by vcc3v3_sys
[    3.178047] LDO_REG6: supplied by vcc3v3_sys
[    3.179565] LDO_REG7: supplied by vcc3v3_sys
[    3.181045] LDO_REG8: supplied by vcc3v3_sys
[    3.182567] SWITCH_REG1: supplied by vcc3v3_sys
[    3.183408] SWITCH_REG2: supplied by vcc3v3_sys
[    3.187111] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[    3.188352] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff8009ac8000
[    3.190184] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff8009aca000
[    3.191757] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff8009acc000
[    3.193923] IR NEC protocol handler initialized
[    3.195459] rkisp1 ff910000.rkisp1: rkisp1 driver version: v00.01.05
[    3.196047] rkisp1 ff910000.rkisp1: Missing rockchip,grf property
[    3.198963] rkisp1 ff920000.rkisp1: rkisp1 driver version: v00.01.05
[    3.199570] rkisp1 ff920000.rkisp1: Missing rockchip,grf property
[    3.202394] usbcore: registered new interface driver npu_acm
[    3.203009] usbcore: registered new interface driver uvcvideo
[    3.203536] USB Video Class driver (1.1.1)
[    3.206705] Boot mode: normal
[    3.209105] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[    3.210177] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
[    3.212434] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[    3.213475] rtk_btusb: Realtek Bluetooth USB driver ver 3.1.a2fd257.20190430-133301
[    3.214175] rtk_btcoex: rtk_btcoex_init: version: 1.2
[    3.214628] rtk_btcoex: create workqueue
[    3.214977] rtk_btcoex: Coex over UDP
[    3.215597] rtk_btcoex: alloc buffers 1792, 2432 for ev and l2
[    3.216239] usbcore: registered new interface driver rtk_btusb
[    3.216771] Bluetooth: Virtual HCI driver ver 1.5
[    3.217349] Bluetooth: HCI UART driver ver 2.3
[    3.217750] Bluetooth: HCI UART protocol H4 registered
[    3.218219] Bluetooth: HCI UART protocol LL registered
[    3.218674] Bluetooth: HCI UART protocol ATH3K registered
[    3.219250] usbcore: registered new interface driver bfusb
[    3.219810] usbcore: registered new interface driver btusb
[    3.221077] cpu cpu0: bin=1
[    3.221433] cpu cpu0: leakage=18
[    3.234186] cpu cpu0: temp=51111, pvtm=148774 (148114 + 660)
[    3.235045] cpu cpu0: pvtm-volt-sel=2
[    3.235471] cpu cpu0: bin-scale=34
[    3.236268] cpu cpu4: bin=1
[    3.236598] cpu cpu4: leakage=33
[    3.249529] cpu cpu4: temp=51111, pvtm=153769 (153419 + 350)
[    3.250965] cpu cpu4: pvtm-volt-sel=1
[    3.251378] cpu cpu4: bin-scale=17
[    3.253372] cpu cpu0: avs=0
[    3.253774] cpu cpu0: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.254941] cpu cpu0: failed to find power_model node
[    3.256719] cpu cpu4: avs=0
[    3.257120] cpu cpu4: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.259656] cpu cpu4: failed to find power_model node
[    3.260932] sdhci: Secure Digital Host Controller Interface driver
[    3.261494] sdhci: Copyright(c) Pierre Ossman
[    3.261891] Synopsys Designware Multimedia Card Interface Driver
[    3.263452] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    3.264116] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    3.264731] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    3.265282] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    3.266161] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.266948] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    3.267509] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    3.268987] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    3.269682] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    3.270296] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    3.270837] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    3.271714] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.272544] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    3.273917] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.276219] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[    3.276765] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[    3.297170] usb 2-1: new high-speed USB device number 2 using ehci-platform
[    3.305084] mmc0: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[    3.307824] hidraw: raw HID events driver (C) Jiri Kosina
[    3.309477] usbcore: registered new interface driver usbhid
[    3.309986] usbhid: USB HID core driver
[    3.311094] inv_mpu_iio: inv_mpu_init:746
[    3.318261] usbcore: registered new interface driver snd-usb-audio
[    3.321748] rt5640 1-001c: Can not read property hp_det_gpio
[    3.322289] rt5640 1-001c: Can not read property: linein-mute.
[    3.340059] rk-hdmi-dp-sound hdmi-dp-sound: i2s-hifi <-> ff8a0000.i2s mapping ok
[    3.344399] NET: Registered protocol family 10
[    3.345672] NET: Registered protocol family 17
[    3.346316] Bluetooth: RFCOMM socket layer initialized
[    3.346820] Bluetooth: RFCOMM ver 1.11
[    3.347197] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.347729] Bluetooth: HIDP socket layer initialized
[    3.348220] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    3.349011] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    3.349516] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6356s
[    3.350132] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    3.350767] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    3.350950] mmc0: new HS400 Enhanced strobe MMC card at address 0001
[    3.351841] mmcblk0: mmc0:0001 TX2932 29.1 GiB
[    3.352389] mmcblk0boot0: mmc0:0001 TX2932 partition 1 4.00 MiB
[    3.352864] mmcblk0boot1: mmc0:0001 TX2932 partition 2 4.00 MiB
[    3.353218] mmcblk0rpmb: mmc0:0001 TX2932 partition 3 4.00 MiB
[    3.354127] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
[    3.354952] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
[    3.355607] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    3.356073] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    3.356170]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8
[    3.356972] [BT_RFKILL]: Enter rfkill_rk_init
[    3.358199] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
[    3.358959] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
[    3.359704] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 90.
[    3.360445] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
[    3.361472] [BT_RFKILL]: Request irq for bt wakeup host
[    3.361983] [BT_RFKILL]: ** disable irq
[    3.362500] [BT_RFKILL]: bt_default device registered.
[    3.363065] Key type dns_resolver registered
[    3.363696] sensor_register_slave:mpu6880_gyro,id=51
[    3.364321] ov13850 1-0036: driver version: 00.01.03
[    3.364523] vendor storage:20190527 ret = 0
[    3.365626] ov13850 1-0036: could not get default pinstate
[    3.366112] ov13850 1-0036: could not get sleep pinstate
[    3.368854] ov13850 1-0036: write SCCB_ID failed
[    3.369442] ov13850: probe of 1-0036 failed with error -5
[    3.369985] ov13850 1-0046: driver version: 00.01.03
[    3.370844] ov13850 1-0046: could not get default pinstate
[    3.371343] ov13850 1-0046: could not get sleep pinstate
[    3.373964] ov13850 1-0046: write SCCB_ID failed
[    3.374525] ov13850: probe of 1-0046 failed with error -5
[    3.376247] Registered cp15_barrier emulation handler
[    3.376785] Registered setend emulation handler
[    3.378013] Loading compiled-in X.509 certificates
[    3.381016] Btrfs loaded
[    3.382407] rga2: Driver loaded successfully ver:3.2.18218
[    3.383262] rga2: Module initialized.
[    3.384314] mali ff9a0000.gpu: leakage=22
[    3.397284] mali ff9a0000.gpu: temp=51666, pvtm=124729 (124609 + 120)
[    3.398623] mali ff9a0000.gpu: pvtm-volt-sel=1
[    3.399318] mali ff9a0000.gpu: avs=0
[    3.400203] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[    3.401009] mali ff9a0000.gpu: Protected mode not available
[    3.402328] mali ff9a0000.gpu: l=0 h=2147483647 hyst=5000 l_limit=0 h_limit=0 h_table=0
[    3.403075] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[    3.404131] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 423; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[    3.406515] mali ff9a0000.gpu: Probed as mali0
[    3.411974] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    3.412441] usb 2-1: New USB device found, idVendor=1a40, idProduct=0201
[    3.412446] usb 2-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    3.412450] usb 2-1: Product: USB 2.0 Hub [MTT]
[    3.413027] hub 2-1:1.0: USB hub found
[    3.413269] hub 2-1:1.0: 7 ports detected
[    3.414938] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    3.415744] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    3.416549] xhci-hcd xhci-hcd.9.auto: irq 229, io mem 0xfe800000
[    3.417260] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[    3.417857] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.418504] usb usb5: Product: xHCI Host Controller
[    3.418942] usb usb5: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.419443] usb usb5: SerialNumber: xhci-hcd.9.auto
[    3.420300] hub 5-0:1.0: USB hub found
[    3.420653] hub 5-0:1.0: 1 port detected
[    3.421237] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    3.421828] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    3.422556] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.423353] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
[    3.423950] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.424596] usb usb6: Product: xHCI Host Controller
[    3.425033] usb usb6: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.425533] usb usb6: SerialNumber: xhci-hcd.9.auto
[    3.426366] hub 6-0:1.0: USB hub found
[    3.426722] hub 6-0:1.0: 1 port detected
[    3.431213] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    3.431856] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 7
[    3.432652] xhci-hcd xhci-hcd.10.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x06030010
[    3.433464] xhci-hcd xhci-hcd.10.auto: irq 230, io mem 0xfe900000
[    3.434157] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[    3.434757] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.435399] usb usb7: Product: xHCI Host Controller
[    3.435828] usb usb7: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.436332] usb usb7: SerialNumber: xhci-hcd.10.auto
[    3.437168] hub 7-0:1.0: USB hub found
[    3.437525] hub 7-0:1.0: 1 port detected
[    3.438067] xhci-hcd xhci-hcd.10.auto: xHCI Host Controller
[    3.438721] xhci-hcd xhci-hcd.10.auto: new USB bus registered, assigned bus number 8
[    3.439449] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.440231] usb usb8: New USB device found, idVendor=1d6b, idProduct=0003
[    3.440831] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.441472] usb usb8: Product: xHCI Host Controller
[    3.441901] usb usb8: Manufacturer: Linux 4.4.194+ xhci-hcd
[    3.442404] usb usb8: SerialNumber: xhci-hcd.10.auto
[    3.443208] hub 8-0:1.0: USB hub found
[    3.443561] hub 8-0:1.0: 1 port detected
[    3.444819] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[    3.445490] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[    3.446097] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[    3.446634] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[    3.447501] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.448284] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[    3.448825] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[    3.449616] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[    3.462796] mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.476219] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[    3.477420] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[    3.478075] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[    3.478696] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[    3.479239] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 26,32 bit host data width,256 deep fifo
[    3.480097] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[    3.480917] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[    3.481751] dwmmc_rockchip fe320000.dwmmc: allocated mmc-pwrseq
[    3.482395] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    3.483070] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
[    3.496313] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[    3.509919] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[    3.519503] asoc-simple-card rt5640-sound: rt5640-aif1 <-> ff890000.i2s mapping ok
[    3.522659] input: rockchip,rt5640-codec Headphone Jack as /devices/platform/rt5640-sound/sound/card1/input1
[    3.524239]
[    3.524280] [dhd] dhd_module_init: in Dongle Host Driver, version 100.10.545.19 (r826445-20210324-3)
[    3.524284] [dhd] ======== dhd_wlan_init_plat_data ========
[    3.524286] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    3.524292] [dhd] dhd_wlan_init_gpio: WL_HOST_WAKE=-1, oob_irq=69, oob_irq_flags=0x414
[    3.524293] [dhd] dhd_wlan_init_gpio: WL_REG_ON=-1
[    3.524295] [dhd] dhd_wifi_platform_load: Enter
[    3.524298] [dhd] Power-up adapter 'DHD generic adapter'
[    3.524328] [dhd] wifi_platform_set_power = 1, delay: 200 msec
[    3.524332] [dhd] ======== PULL WL_REG_ON(-1) HIGH! ========
[    3.524334] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    3.524336] [WLAN_RFKILL]: wifi turn on power. -1
[    3.530041] =======================================================
[    3.530600] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    3.531158] =======================================================
[    3.531709] Realtek 8723DU USB WiFi driver (Powered by Rockchip) init.
[    3.532291] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    3.532706] [WLAN_RFKILL]: wifi turn on power. -1
[    3.533121] RTW: module init start
[    3.533429] RTW: rtl8723du v5.6.5.1_34252.20190703_COEX20181130-2e2e
[    3.533993] RTW: build time: May 17 2022 22:49:45
[    3.534414] RTW: rtl8723du BT-Coex version = COEX20181130-2e2e
[    3.535112] usbcore: registered new interface driver rtl8723du
[    3.535659] RTW: module init ret=0
[    3.536843] input: gpio-keys as /devices/platform/gpio-keys/input/input2
[    3.537753] ==gsl_ts_init==
[    3.538097] GSLX680 Enter gsl_ts_probe
[    3.538460] ==kzalloc success=
[    3.545098] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    3.547197] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.549221] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    3.552521] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    3.556391] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[    3.608338] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0)
[    3.738860] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 224
[    3.747991] mmc1: queuing unknown CIS tuple 0x91 (3 bytes)
[    3.748599] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    3.825353] [dhd] wifi_platform_bus_enumerate device present 1
[    3.825890] [dhd] ======== Card detection to detect SDIO card! ========
[    3.826508] mmc1:mmc host rescan start!
[    3.843274] [dhd] bcmsdh_register: register client driver
[    3.843908] [dhd] bcmsdh_sdmmc_probe: Enter num=1
[    3.844423] [dhd] bcmsdh_sdmmc_probe: Enter num=2
[    3.844837] [dhd] bus num (host idx)=1, slot num (rca)=1
[    3.845316] [dhd] found adapter info 'DHD generic adapter'
[    3.845820] [dhd] sdioh_attach: set sd_f2_blocksize 256
[    3.846303] [dhd] sdioh_attach: sd clock rate = 0
[    3.846827] [dhd] dhdsdio_probe : no mutex held. set lock
[    3.847371] [dhd] F1 signature read @0x18000000=0x17224356
[    3.850127] [dhd] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[    3.851055] [dhd] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[    3.851768] [dhd] dhd_conf_set_chiprev : devid=0x4356, chip=0x4354, chiprev=2
[    3.853291] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.854032] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.854776] [dhd] CFG80211-ERROR) wl_cfg80211_netdev_notifier_call : wdev null. Do nothing
[    3.855940] [dhd] dhd_log_dump_init: kernel log buf size = 256KB; logdump_prsrv_tailsize = 80KB; limit prsrv tail size to = 38KB
[    3.857845] [dhd] dhd_attach(): thread:dhd_watchdog_thread:ca started
[    3.858627] [dhd] dhd_attach(): thread:dhd_dpc:cb started
[    3.859558] [dhd] dhd_attach(): thread:dhd_rxf:cc started
[    3.860061] [dhd] dhd_deferred_work_init: work queue initialized
[    3.860660] [dhd] dhd_tcpack_suppress_set: TCP ACK Suppress mode 0 -> mode 2
[    3.861359] [dhd] get_mem_val_from_file: File [/data/misc/wifi/.memdump.info] doesn't exist
[    3.862100] [dhd] dhd_get_memdump_info: MEMDUMP ENABLED = 3
[    3.862626] [dhd] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[    3.867465] [dhd] dhdsdio_probe_init: making DHD_BUS_DOWN
[    3.868027] [dhd] Dongle Host Driver, version 100.10.545.19 (r826445-20210324-3)
[    3.869197] [dhd] Register interface [wlan0]  MAC: d4:12:43:a0:3f:4c
[    3.869197]
[    3.869885] [dhd] dhdsdio_probe : the lock is released.
[    3.870432] [dhd] dhd_module_init: Exit err=0
[    4.405383] gsl_ts_probe--1375, i2c_master_recv fail
[    4.405916] ret=0
[    4.407619] rk808-rtc rk808-rtc: setting system clock to 2022-06-24 07:34:22 UTC (1656056062)
[    4.426841] vcc_mipi: disabling
[    4.427147] dvdd_1v2: disabling
[    4.432502] ret 1024
[    4.433671] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '22:48:03', on 'May 17 2022'.
[    4.435951] Mali: Mali device driver loaded
[    4.436586] rkisp1 ff910000.rkisp1: clear unready subdev num: 1
[    4.438525] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.439087] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.439684] rkisp1: update sensor failed
[    4.440041] rkisp1 ff920000.rkisp1: clear unready subdev num: 1
[    4.441935] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.442547] rockchip-mipi-dphy-rx: No link between dphy and sensor
[    4.443096] rkisp1: update sensor failed
[    4.444231] ALSA device list:
[    4.444499]   #0: rk-hdmi-dp-sound
[    4.444798]   #1: rockchip,rt5640-codec
[    4.445656] Freeing unused kernel memory: 1216K
Loading, please wait...
/dev/console is Ok
starting version 237
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Running /scripts/local-premount ... done.
Warning: fsck not present, so skipping root file system
mount: mounting /dev/mmcblk0p7 on /root failed: Invalid argument
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... Warning: overlayroot: configuring overlayroot with driver=overlay mode=device opts='dev=PARTLABEL=userdata,fstype=ext4,mkfs=1' per kernel cmdline
[    5.190864] EXT4-fs (mmcblk0p8): recovery complete
[    5.191584] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null)
mount: mounting /root on /root-ro failed: Invalid argument
Failure: overlayroot: failed to move root away from /root to /root-ro
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting /dev on /root/dev failed: No such file or directory
Warning: Something odd, no /lib/modules/4.4.194+ in initramfs.
done.
mount: mounting /run on /root/run failed: No such file or directory
run-init: current directory on the same filesystem as the root: error 0
Target filesystem doesn't have requested /sbin/init.
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
run-init: current directory on the same filesystem as the root: error 0
No init found. Try passing init= bootarg.


BusyBox v1.27.2 (Ubuntu 1:1.27.2-2ubuntu3.2) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) [    8.148440] random: nonblocking pool is initialized
[  611.807853] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 2560x1440p60, type: 11
[  611.829727] dwhdmi-rockchip ff940000.hdmi: Rate 241500000 missing; compute N dynamically
▒

Liuth

AIO-3399J_Ubuntu18.04-r21156_v2.5.1b_220528.img
是完整固件，直接烧录，不用重新打包，它不是文件系统

蝈蝈

Liuth 发表于 2022-6-24 16:30
AIO-3399J_Ubuntu18.04-r21156_v2.5.1b_220528.img
是完整固件，直接烧录，不用重新打包，它不是文件系统

好的，谢谢