基于UBUNTU18.04,AIO-3568J开发板上接入配套购买的EC20模块。 1. 通过UBUNTU右上方的网络设置发现模块无法联网。 2. 直接输入AT命令,检测SIM卡的IMSI信息,没问题。SIM卡为电信卡,如下信息: firefly@firefly:~$ busybox microcom /dev/ttyUSB2 at+cimi 460115304260332 OK 3. 通过命令quectel-CM 配置,wwan0会被down, LOG如下。 其SIM卡状态也是ready的 firefly@firefly:~$ sudo quectel-CM -s ctlte [04-20_02:37:44:221] QConnectManager_Linux_V1.6.1 [04-20_02:37:44:226] Find /sys/bus/usb/devices/5-1.3 idVendor=0x2c7c idProduct=0x125, bus=0x005, dev=0x003 [04-20_02:37:44:227] Auto find qmichannel = /dev/cdc-wdm0 [04-20_02:37:44:228] Auto find usbnet_adapter = wwan0 [04-20_02:37:44:228] netcard driver = qmi_wwan_q, driver version = 22-Aug-2005 [04-20_02:37:44:229] Modem works in QMI mode [04-20_02:37:44:243] /proc/992/fd/7 -> /dev/cdc-wdm0 [04-20_02:37:44:243] /proc/992/exe -> /usr/local/bin/quectel-CM [04-20_02:37:46:261] cdc_wdm_fd = 7 [04-20_02:37:46:363] Get clientWDS = 4 [04-20_02:37:46:395] Get clientDMS = 1 [04-20_02:37:46:427] Get clientNAS = 4 [04-20_02:37:46:459] Get clientUIM = 1 [04-20_02:37:46:491] Get clientWDA = 1 [04-20_02:37:46:523] requestBaseBandVersion EC20CEFRGR06A04M4G [04-20_02:37:46:651] requestGetSIMStatus SIMStatus: SIM_READY [04-20_02:37:46:685] requestGetProfile[1] ctlte///0/IPV4 [04-20_02:37:46:686] requestSetProfile[1] ctlte///0/IPV4 [04-20_02:37:46:686] no need to set skip the rest [04-20_02:37:46:716] requestRegistrationState2 MCC: 0, MNC: 0, PS: Detached, DataCap: UNKNOW [04-20_02:37:46:747] requestQueryDataCall IPv4ConnectionStatus: DISCONNECTED [04-20_02:37:46:747] ifconfig wwan0 0.0.0.0 [04-20_02:37:46:766] ifconfig wwan0 down [04-20_02:43:56:829] requestRegistrationState2 MCC: 0, MNC: 0, PS: Detached, DataCap: UNKNOW 附件: kernel dmesg信息,特别注意1134行以后。 求助,谢谢大家! |
-
22.56 KB, 下载次数: 2, 下载积分: 灯泡 -1 , 经验 -1