Firefly开源社区

12
发表新贴
打印 上一主题 下一主题

[Android] 为什么单独编译内核,烧写之后没用内核更新

53

积分

0

威望

0

贡献

技术小白

积分
53

为什么单独编译内核,烧写之后没用内核更新

发表于 3 天前      浏览:123 | 回复:15        打印      只看该作者   [复制链接] 楼主
  • 固件类型: 官方提供的固件
  • 固件文件名称: ROC-3576
  • 固件下载地址: 百度网盘
  • Log日志: log.rar
问题描述及复现步骤:

ANDROID 14 SDK 我使用这个单独编译内核的命令,编译之后烧写生成的boot.img,但是很奇怪,板子中的内核没用发生更新

log.rar

77 Bytes, 下载次数: 0, 下载积分: 灯泡 -1 , 经验 -1

回复

使用道具 举报

1182

积分

1

威望

3

贡献

官方团队

Rank: 9Rank: 9Rank: 9

积分
1182
发表于 3 天前        只看该作者  沙发
ls -l 确认烧写进入的boot.img日期
回复

使用道具 举报

53

积分

0

威望

0

贡献

技术小白

积分
53
发表于 3 天前        只看该作者  板凳
我确定放到烧写工具的boot.img是最新编译出来的内核
回复

使用道具 举报

1182

积分

1

威望

3

贡献

官方团队

Rank: 9Rank: 9Rank: 9

积分
1182
发表于 3 天前        只看该作者  地板
提供日志
回复

使用道具 举报

53

积分

0

威望

0

贡献

技术小白

积分
53
发表于 前天 16:27        只看该作者  5#

U-Boot 2017.09 (Nov 05 2024 - 02:20:57 +0000)

Model: Rockchip RK3576 Evaluation board
MPIDR: 0x0
PreSerial: 0, raw, 0x2ad40000
DRAM:  4 GiB
Sysmem: init
Relocation Offset: bda1c000
Relocation fdt: fb9fa070 - fb9fece8
CR: M/C/I
Using default environment

optee api revision: 2.0
mmc@2a310000: 1, mmc@2a330000: 0
Bootdev(atags): mmc 0
MMC0: HS400 Enhanced Strobe, 200Mhz
PartType: EFI
DM: v2
Android 14.0, Build 2024.2, v2
boot mode: recovery (misc)
RESC: 'recovery', blk@0x0005698c
Device is: UNLOCKED
DTB: rk-kernel.dtb
HASH(ce): OK
ANDROID: fdt overlay OK
dw_dp_bind zyb enter
I2c1 speed: 100000Hz
PMIC:  RK8060 (on=0x40, off=0x00)
vdd_cpu_big_s0 init 850000 uV
vdd_npu_s0 750000 uV
vdd_cpu_lit_s0 init 850000 uV
vdd_gpu_s0 init 750000 uV
vdd_logic_s0 init 750000 uV
vdd_ddr_s0 850000 uV
Model: Rockchip RK3576 EVB1 V10 Board
Rockchip UBOOT DRM driver version: v1.0.1
Assign plane mask automatically
VOP have 3 active VP
vp0 have layer nr:1[2 ], primary plane: 2
vp1 have layer nr:1[3 ], primary plane: 3
vp2 have layer nr:1[8 ], primary plane: 8
disp info 2, type:16, id:0
base2_disp_info couldn't be found, screen_info type[0] or id[0] mismatched
Using display timing dts
dsi@27d80000:  detailed mode clock 132000 kHz, flags[a]
    H: 1080 1095 1099 1129
    V: 1920 1935 1937 1952
bus_format: 100e
VOP update mode to: 1080x1920p60, type: MIPI0 for VP1
VP1 set crtc_clock to 132000KHz
Unsupported bt709f at 10bit csc depth, use bt601f instead
VOP VP1 enable Esmart1[500x501->500x501@290x709] fmt[0] addr[0xfdf00000]
final DSI-Link bandwidth: 880000 Kbps x 4
disp info 0, type:11, id:0
hdmi@27da0000 disconnected
CLK: (uboot. arm: enter 1008000 KHz, init 1008000 KHz, kernel 0N/A)
  bpll 816000 KHz
  lpll 816000 KHz
  vpll 594000 KHz
  aupll 786431 KHz
  cpll 1000000 KHz
  gpll 1188000 KHz
  ppll 1300000 KHz
  aclk_bus_root 396000 KHz
  pclk_bus_root 100000 KHz
  hclk_bus_root 198000 KHz
  aclk_top 786431 KHz
  aclk_top_mid 396000 KHz
  pclk_top 100000 KHz
  hclk_top 200000 KHz
Net:   Net Initialization Skipped
No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
ANDROID: reboot reason: "recovery"
Vboot=0, AVB images, AVB verify
read_is_device_unlocked() ops returned that device is UNLOCKED
avb_footer.c:41: ERROR: Footer magic is incorrect.
avb_vbmeta_image.c:65: ERROR: Magic is incorrect.
avb_slot_verify.c:774: ERROR: recovery: Error verifying vbmeta image: invalid vbmeta header
Verify recovery with vbmeta.
avb_slot_verify.c:763: ERROR: vbmeta: Error verifying vbmeta image: OK_NOT_SIGNED
preloaded: distribute image from 'recovery
ANDROID: sha1(150ea524f7...) + OK
Could not find "system" partition
Booting IMAGE kernel at 0x40400000 with fdt at 0x48300000...


Fdt Ramdisk skip relocation
## Booting Android Image at 0x403ff800 ...
Kernel: 0x40400000 - 0x42762008 (36233 KiB)
ramdisk:    0x4a200000 - 0x4d2ce38a (49977 KiB)
## Flattened Device Tree blob at 0x48300000
   Booting using the fdt blob at 0x48300000
   XIP Kernel Image from 0x40400000 to 0x40400000 ... OK
   kernel loaded at 0x40400000, end = 0x42762008
   Using Device Tree in place at 0000000048300000, end 0000000048344108
scanning bus for devices...
Timedout waiting for UIC response
Host controller enable failed
ufshcd_pltfrm_init() failed -5
FDT: UFS was not detected, disabling UFS.
vp0, plane_mask:0x4, primary-id:2, curser-id:-1
vp1, plane_mask:0x8, primary-id:3, curser-id:-1
vp2, plane_mask:0x100, primary-id:8, curser-id:-1
## reserved-memory:
  drm-logo@0: addr=fdf00000 size=1ea000
  ramoops@40110000: addr=40110000 size=e0000
Adding bank: 0x40200000 - 0x48400000 (size: 0x08200000)
Adding bank: 0x49400000 - 0x100000000 (size: 0xb6c00000)
Adding bank: 0x100000000 - 0x240000000 (size: 0x140000000)
Total: 1414.530/1525.292 ms

Starting kernel ...

[    1.542084][    T0] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
[    1.542109][    T0] Linux version 6.1.57 (xuanyf@u20) (Android (10087095, +pgo, +bolt, +lto, -mlgo, based on r487747c) clang version 17.0.2 (https://android.googlesource.com/toolchain/llvm-project d9f89f4d16663d5012e5c09495f3b30ece3d2362), LLD 17.0.2) #4 SMP PREEMPT Tue Nov  5 02:25:38 UTC 2024
[    1.545356][    T0] random: crng init done
[    1.550699][    T0] Machine model: Rockchip RK3576 EVB1 V10 Board
[    1.563679][    T0] earlycon: uart8250 at MMIO32 0x000000002ad40000 (options '')
[    1.619200][    T0] printk: bootconsole [uart8250] enabled
[    1.627983][    T0] OF: fdt: Reserved memory: failed to reserve memory for node 'drm-cubic-lut@0': base 0x0000000000000000, size 0 MiB
[    1.641290][    T0] OF: reserved mem: 0x0000000040110000..0x00000000401effff ( 896 KB ) map non-reusable ramoops@40110000
[    1.653320][    T0] OF: reserved mem: 0x00000000fdf00000..0x00000000fe0e9fff ( 1960 KB ) map non-reusable drm-logo@0
[    1.793844][    T0] Zone ranges:
[    1.797395][    T0]   DMA32    [mem 0x0000000040200000-0x00000000ffffffff]
[    1.804939][    T0]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    1.812479][    T0] Movable zone start for each node
[    1.817918][    T0] Early memory node ranges
[    1.822595][    T0]   node   0: [mem 0x0000000040200000-0x00000000483fffff]
[    1.830230][    T0]   node   0: [mem 0x0000000049400000-0x000000023fffffff]
[    1.837867][    T0] Initmem setup node 0 [mem 0x0000000040200000-0x000000023fffffff]
[    1.847167][    T0] On node 0, zone DMA32: 512 pages in unavailable ranges
[    1.864832][    T0] On node 0, zone DMA32: 4096 pages in unavailable ranges
[    1.903048][    T0] cma: Reserved 16 MiB at 0x00000000ff000000
[    1.917196][    T0] psci: probing for conduit method from DT.
[    1.923502][    T0] psci: PSCIv1.1 detected in firmware.
[    1.929324][    T0] psci: Using standard PSCI v0.2 function IDs
[    1.935815][    T0] psci: Trusted OS migration not required
[    1.941929][    T0] psci: SMC Calling Convention v1.2
[    1.947815][    T0] percpu: Embedded 28 pages/cpu s76776 r8192 d29720 u114688
[    1.955783][    T0] Detected VIPT I-cache on CPU0
[    1.960973][    T0] CPU features: detected: ARM erratum 845719
[    1.967370][    T0] alternatives: applying boot alternatives
[    1.974180][    T0] Built 1 zonelists, mobility grouping on.  Total pages: 2059784
[    1.982491][    T0] Kernel command line: storagemedia=emmc androidboot.storagemedia=emmc androidboot.mode=normal  androidboot.dtb_idx=0 androidboot.dtbo_idx=0  androidboot.verifiedbootstate=orange androidboot.serialno=968033eba91e97ad console=ttyFIQ0 firmware_class.path=/vendor/etc/firmware init=/init rootwait ro loop.max_part=7 printk.devkmsg=on kvm-arm.mode=none androidboot.console=ttyFIQ0 androidboot.wificountrycode=CN androidboot.hardware=rk30board androidboot.boot_devices=2a2d0000.ufs,2a330000.mmc androidboot.selinux=permissive androidboot.console=ttyFIQ0 androidboot.wificountrycode=CN androidboot.hardware=rk30board androidboot.boot_devices=2a2d0000.ufs,2a330000.mmc androidboot.selinux=permissive earlycon=uart8250,mmio32,0x2ad40000 rcupdate.rcu_expedited=1 rcu_nocbs=all androidboot.fwver=ddr-v1.03-81dd75088a,bl31-v1.05,bl32-v1.01,uboot-11/05/2024
[    2.065758][    T0] Unknown kernel command line parameters "storagemedia=emmc", will be passed to user space.
[    2.077599][    T0] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    2.087615][    T0] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    2.096969][    T0] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
[    2.105176][    T0] software IO TLB: area num 8.
[    2.125666][    T0] software IO TLB: mapped [mem 0x00000000f9f00000-0x00000000fdf00000] (64MB)
[    2.232102][    T0] Memory: 8035572K/8370176K available (21440K kernel code, 4232K rwdata, 8648K rodata, 1792K init, 959K bss, 318220K reserved, 16384K cma-reserved)
[    2.248445][    T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    2.256455][    T0] trace event string verifier disabled
[    2.262443][    T0] rcu: Preemptible hierarchical RCU implementation.
[    2.269505][    T0] rcu:     RCU event tracing is enabled.
[    2.275231][    T0] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    2.282674][    T0]  All grace periods are expedited (rcu_expedited).
[    2.289735][    T0]  Trampoline variant of Tasks RCU enabled.
[    2.296032][    T0]  Tracing variant of Tasks RCU enabled.
[    2.302044][    T0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    2.316971][    T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    2.326812][    T0] Root IRQ handler: gic_handle_irq
[    2.332276][    T0] GIC: Using split EOI/Deactivate mode
[    2.338746][    T0] rcu:     Offload RCU callbacks from CPUs: 0-7.
[    2.345255][    T0] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    2.376328][    T0] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    2.383554][    T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    2.395718][    T0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    2.406613][    T0] kfence: initialized - using 524288 bytes for 63 objects at 0x(____ptrval____)-0x(____ptrval____)
[    2.417938][    T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
[    2.429601][    T0] pid_max: default: 32768 minimum: 301
[    2.435283][    T0] LSM: Security Framework initializing
[    2.440990][    T0] SELinux:  Initializing.
[    2.445515][    T0] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.454276][    T0] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.464532][    T1] cacheinfo: Unable to detect cache hierarchy for CPU 0
[    2.472283][    T1] cblist_init_generic: Setting adjustable number of callback queues.
[    2.480727][    T1] cblist_init_generic: Setting shift to 3 and lim to 1.
[    2.488035][    T1] cblist_init_generic: Setting adjustable number of callback queues.
[    2.496449][    T1] cblist_init_generic: Setting shift to 3 and lim to 1.
[    2.503787][    T1] rcu: Hierarchical SRCU implementation.
[    2.509633][    T1] rcu:     Max phase no-delay instances is 1000.
[    2.518639][    T1] smp: Bringing up secondary CPUs ...
I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
I/TC: Secondary CPU 4 initializing
I/TC: Secondary CPU 4 switching to normal world boot
I/TC: Secondary CPU 5 initializing
I/TC: Secondary CPU 5 switching to normal world boot
I/TC: Secondary CPU 6 initializing
I/TC: Secondary CPU 6 switching to normal world boot
I/TC: Secondary CPU 7 initializing
I/TC: Secondary CPU 7 switching to normal world boot
[    2.532467][    T0] Detected VIPT I-cache on CPU1
[    2.532537][    T0] cacheinfo: Unable to detect cache hierarchy for CPU 1
[    2.532568][    T0] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
[    2.540813][    T0] Detected VIPT I-cache on CPU2
[    2.540869][    T0] cacheinfo: Unable to detect cache hierarchy for CPU 2
[    2.540890][    T0] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
[    2.549124][    T0] Detected VIPT I-cache on CPU3
[    2.549179][    T0] cacheinfo: Unable to detect cache hierarchy for CPU 3
[    2.549197][    T0] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
[    2.557493][    T0] CPU features: detected: Spectre-v3a
[    2.557501][    T0] CPU features: detected: Spectre-BHB
[    2.557504][    T0] CPU features: detected: ARM erratum 1742098
[    2.557506][    T0] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[    2.557509][    T0] Detected PIPT I-cache on CPU4
[    2.557565][    T0] cacheinfo: Unable to detect cache hierarchy for CPU 4
[    2.557584][    T0] CPU4: Booted secondary processor 0x0000000100 [0x411fd080]
[    2.565790][    T0] Detected PIPT I-cache on CPU5
[    2.565832][    T0] cacheinfo: Unable to detect cache hierarchy for CPU 5
[    2.565844][    T0] CPU5: Booted secondary processor 0x0000000101 [0x411fd080]
[    2.574055][    T0] Detected PIPT I-cache on CPU6
[    2.574097][    T0] cacheinfo: Unable to detect cache hierarchy for CPU 6
[    2.574109][    T0] CPU6: Booted secondary processor 0x0000000102 [0x411fd080]
[    2.582302][    T0] Detected PIPT I-cache on CPU7
[    2.582344][    T0] cacheinfo: Unable to detect cache hierarchy for CPU 7
[    2.582356][    T0] CPU7: Booted secondary processor 0x0000000103 [0x411fd080]
[    2.582420][    T1] smp: Brought up 1 node, 8 CPUs
[    2.752029][    T1] SMP: Total of 8 processors activated.
[    2.757722][    T1] CPU features: detected: 32-bit EL0 Support
[    2.763879][    T1] CPU features: detected: CRC32 instructions
[    2.770128][    T1] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
[    2.779705][    T1] CPU: All CPU(s) started at EL2
[    2.784820][    T1] alternatives: applying system-wide alternatives
[    2.796351][    T1] devtmpfs: initialized
[    2.819748][    T1] Registered cp15_barrier emulation handler
[    2.825886][    T1] Registered setend emulation handler
[    2.831618][    T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    2.842738][    T1] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    2.851128][    T1] pinctrl core: initialized pinctrl subsystem
[    2.858013][    T1] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    2.866030][    T1] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[    2.874573][    T1] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[    2.883941][    T1] audit: initializing netlink subsys (disabled)
[    2.890509][   T68] audit: type=2000 audit(0.340:1): state=initialized audit_enabled=0 res=1
[    2.893502][    T1] Registered FIQ tty driver
[    2.904359][    T1] thermal_sys: Registered thermal governor 'fair_share'
[    2.904363][    T1] thermal_sys: Registered thermal governor 'step_wise'
[    2.911653][    T1] thermal_sys: Registered thermal governor 'user_space'
[    2.918756][    T1] thermal_sys: Registered thermal governor 'power_allocator'
[    2.925980][    T1] cpuidle: using governor menu
[    2.938796][    T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    2.946966][    T1] ASID allocator initialised with 65536 entries
[    2.955467][    T1] ramoops: boot-log-0      0x8000@0x0000000040110000
[    2.961936][    T1] ramoops: dmesg-0 0x14000@0x0000000040118000
[    2.968273][    T1] ramoops: dmesg-1 0x14000@0x000000004012c000
[    2.974694][    T1] ramoops: console 0x80000@0x0000000040140000
[    2.981068][    T1] ramoops: pmsg    0x30000@0x00000000401c0000
[    2.987392][    T1] printk: console [ramoops-1] enabled
[    2.993096][    T1] pstore: Registered ramoops as persistent store backend
[    3.000512][    T1] ramoops: using 0xe0000@0x40110000, ecc: 0
[    3.008574][    T1] platform mipi0-csi2: Fixed dependency cycle(s) with /csi2-dcphy0/ports/port@1/endpoint@0
[    3.019445][    T1] platform rkcif-mipi-lvds: Fixed dependency cycle(s) with /mipi0-csi2/ports/port@1/endpoint@0
[    3.030480][    T1] platform rkisp-vir0: Fixed dependency cycle(s) with /rkcif-mipi-lvds-sditf/port/endpoint
[    3.041165][    T1] platform rkvpss-vir0: Fixed dependency cycle(s) with /rkisp-vir0-sditf/port/endpoint
[    3.062204][    T1] platform 27d80000.dsi: Fixed dependency cycle(s) with /dsi@27d80000/panel@0/ports/port@0/endpoint
[    3.073557][    T1] platform 27d80000.dsi: Fixed dependency cycle(s) with /vop@27d00000/ports/port@1/endpoint@1
[    3.084801][    T1] platform 27da0000.hdmi: Fixed dependency cycle(s) with /vop@27d00000/ports/port@0/endpoint@2
[    3.095939][    T1] platform 27e40000.dp: Fixed dependency cycle(s) with /vop@27d00000/ports/port@2/endpoint@4
[    3.129124][    T1] rockchip-gpio 27320000.gpio: probed /pinctrl/gpio@27320000
[    3.137187][    T1] rockchip-gpio 2ae10000.gpio: probed /pinctrl/gpio@2ae10000
[    3.145226][    T1] rockchip-gpio 2ae20000.gpio: probed /pinctrl/gpio@2ae20000
[    3.153256][    T1] rockchip-gpio 2ae30000.gpio: probed /pinctrl/gpio@2ae30000
[    3.161255][    T1] rockchip-gpio 2ae40000.gpio: probed /pinctrl/gpio@2ae40000
回复

使用道具 举报

53

积分

0

威望

0

贡献

技术小白

积分
53
发表于 前天 16:56        只看该作者  6#
https://dev.t-firefly.com/thread-124129-1-1.html 我和这个帖子遇到的情况一样,但不知道怎么解决
回复

使用道具 举报

1182

积分

1

威望

3

贡献

官方团队

Rank: 9Rank: 9Rank: 9

积分
1182
发表于 前天 17:23        只看该作者  7#
1 当前只跑着recovery模式,并没有跑到boot


2 这不是3576-PC
回复

使用道具 举报

53

积分

0

威望

0

贡献

技术小白

积分
53
发表于 前天 17:25        只看该作者  8#
我新建了一个lunch
回复

使用道具 举报

53

积分

0

威望

0

贡献

技术小白

积分
53
发表于 前天 17:28        只看该作者  9#

那怎么解决这个报错呢
回复

使用道具 举报

1182

积分

1

威望

3

贡献

官方团队

Rank: 9Rank: 9Rank: 9

积分
1182
发表于 前天 17:40        只看该作者  10#
基于我们的ROC-RK3576-PC去改
回复

使用道具 举报

返回列表
12
您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表