Firefly开源社区

打印 上一主题 下一主题

[Linux] 自制 ubuntu16.04 MRT 固件工具 但是有点问题 求解决

176

积分

0

威望

0

贡献

技术小白

积分
176

自制 ubuntu16.04 MRT 固件工具 但是有点问题 求解决

发表于 2018-12-21 08:55:55      浏览:6935 | 回复:1        打印      只看该作者   [复制链接] 楼主
内核信息没有打印

U-Boot 2017.02-RK3288-06-gf0c33010c6 (Sep 10 2018 - 15:18:25)

CPU: rk3288
cpu version = 0
CPU's clock information:
    arm pll = 816000000HZ
    periph pll = 297000000HZ
    ddr pll = 396000000HZ
    codec pll = 384000000HZ
Board:        Rockchip platform Board
DRAM:  Found dram banks: 1
Adding bank:0000000000000000(0000000100000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 400
SdmmcInit = 2 0
ERROR: v7_dcache_inval_range - start address is not aligned - 0x059bc50c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x059bc70c
ERROR: v7_dcache_inval_range - start address is not aligned - 0x059cc30c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x059cc50c
ERROR: v7_dcache_inval_range - start address is not aligned - 0x059bc50c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x059bc70c
ERROR: v7_dcache_inval_range - start address is not aligned - 0x059cc30c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x059cc50c
ERROR: v7_dcache_inval_range - start address is not aligned - 0x059bc50c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x059bc70c
ERROR: v7_dcache_inval_range - start address is not aligned - 0x059cc30c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x059cc50c
ERROR: v7_dcache_inval_range - start address is not aligned - 0x059bc50c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x059bc70c
ERROR: v7_dcache_inval_range - start address is not aligned - 0x059cc30c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x059cc50c
ERROR: v7_dcache_inval_range - start address is not aligned - 0x059bc50c
ERROR: v7_dcache_inval_range - stop address is not aligned - 0x059cc50c
storage init OK!
Using default environment

GetParam
Load FDT from resource image.
no key node
No pmic detect.
can't find dts node for pwm0
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2018-09-10#2.30
empty serial no.
normal boot.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [0]
no fuel gauge found
Hit any key to stop autoboot:  0
load fdt from resouce.
Secure Boot state: 0
kernel   @ 0x02000000 (0x007b9178)
ramdisk  @ 0x05bf0000 (0x00299c84)
bootrk: do_bootm_linux...
   Loading Device Tree to 05600000, end 05610268 ... OK
Add bank:0000000000000000, 00000000fe000000

Starting kernel ...


然后就启动文件系统了,求解答

回复

使用道具 举报

428

积分

0

威望

0

贡献

技术达人

Rank: 2

积分
428
发表于 2018-12-22 10:41:33        只看该作者  沙发
你说的自制是指自己弄的根文件系统?那你接显示器的话,是不是能够启动起来?
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表