Android5.1.1启动问题

xujin071 · 发表于 2016-12-12 11:24:07

本帖最后由 xujin071 于 2016-12-12 11:27 编辑

新买回的firefly-rk3288开发板，烧入最新的Android5.1.1编译的固件，一直卡在Android字符界面，进不了桌面，各位版主帮忙分析一下启动log信息。

[ 2.338220] ======== PULL WL_REG_ON LOW! ========
[ 2.338228] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 2.346816] arm_release_ver of this mali_ko is 'r6p0-02rel0', rk_ko_ver is '13', built at '09:15:10', on 'Oct 22 2015'.
[ 2.346900] mali ffa30000.gpu: Continuing without Mali clock control
[ 2.346942] mali pd enabled
[ 2.346955] clk enabled
[ 2.346968] MALI_DVFS_STEP = 4, div_dvfs = 10
[ 2.346978] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
[ 2.346988] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
[ 2.346998] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
[ 2.347008] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
[ 2.347111] turn on mali power
[ 2.347125] kbase_platform_rk_init,register_reboot_notifier
[ 2.347168] hrtimer: interrupt took 11959 ns
[ 2.347273] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
[ 2.348078] mali ffa30000.gpu: Probed as mali0
[ 2.349118] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 2.349732] rk29_ipp: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 2.350356] rk29_ipp: version magic '3.0.101+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[ 2.351142] zram0: detected capacity change from 0 to 533413888
[ 2.398062] Adding 520908k swap on /dev/block/zram0. Priority:-1 extents:1 across:520908k SS
[ 2.422039] EXT4-fs (mmcblk0p12): Unrecognized mount option "background_gc=on" or missing value
[ 2.428887] bat_cap: oldcap path is /sys/devices/ff100000.adc
[ 2.428939] bat_cap: oldcap_path no exist
[ 2.429094] binder: 156:156 transaction failed 29189, size 0-0
[ 2.429630] init: Warning! Service displayd needs a SELinux domain defined; please fix!
[ 2.433472] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[ 2.433504] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[ 2.433730] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[ 2.434271] rtk_btusb: btchr_open: BT usb char device is opening
[ 2.434290] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 2.434306] rtk_btusb: btchr_open: BT usb char device is opening
[ 2.434316] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 2.434339] rtk_btusb: btchr_open: BT usb char device is opening
[ 2.434349] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 2.434364] rtk_btusb: btchr_open: BT usb char device is opening
[ 2.434374] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[ 2.438710] [WLAN_RFKILL]: wifi shut off power.
[ 2.438727] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[ 2.438734] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[ 2.438795] 0,baud is:9600
[ 2.438802] dhd_module_init: Exit err=0
[ 2.438922] 1, baud is:115200
[ 2.439069] 1, baud is:115200
[ 2.439159] 0,baud is:9600
[ 2.443338] 2, baud is:115200
[ 2.443897] android_usb: already disabled
[ 2.446128] read descriptors
[ 2.446141] read strings
[ 2.446171] pcd_pullup, is_on 1
[ 2.497678] logd.auditd: start
[ 2.516211] firefly_vga_get_enable 180, 1
[ 2.516334] firefly_vga_get_status 186
[ 2.516922] firefly_vga_set_mode 203
[ 2.517499] firefly_vga_set_enable 159 enable:1
[ 2.792931] EHCI: rk_ehci_hcd_enable, disable host controller
[ 2.792939] dwc_otg_hcd_enable, enable host controller
[ 2.823286] rk3288-lcdc lcdc0: blank mode:0
[ 2.896677] Using Buffer DMA mode
[ 2.896689] Periodic Transfer Interrupt Enhancement - disabled
[ 2.896694] Multiprocessor Interrupt Enhancement - disabled
[ 2.896700] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 2.896705] ^^^^^^^^^^^^^^^^^^Host Mode
[ 2.940616] Init: Power Port (0)
[ 3.255433] Indeed it is in host mode hprt0 = 00021501
[ 3.413597] healthd: No charger supplies found
[ 3.413610] healthd: No battery devices found
[ 3.432545] usb 3-1: new high-speed USB device number 2 using usb20_host
[ 3.432611] Indeed it is in host mode hprt0 = 00001101
[ 3.629539] usb 3-1: New USB device found, idVendor=1a40, idProduct=0101
[ 3.629550] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 3.629557] usb 3-1: Product: USB 2.0 Hub [MTT]
[ 3.630136] hub 3-1:1.0: USB hub found
[ 3.630191] hub 3-1:1.0: 4 ports detected
[ 3.904948] usb 3-1.1: new low-speed USB device number 3 using usb20_host
[ 4.007217] usb 3-1.1: New USB device found, idVendor=093a, idProduct=2510
[ 4.007228] usb 3-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.007235] usb 3-1.1: Product: USB Optical Mouse
[ 4.007241] usb 3-1.1: Manufacturer: PixArt
[ 4.010535] input: PixArt USB Optical Mouse as /devices/ff540000.usb/usb3/3-1/3-1.1/3-1.1:1.0/input/input3
[ 4.011296] hid-generic 0003:093A:2510.0001: input,hidraw0: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-ff540000.usb-1.1/input0
shell@firefly:/ $ [ 8.696950] [otg id chg] last id -1 current id 1
[ 8.696973] PortPower off
[ 8.696980] rk_battery_charger_detect_cb , battery_charger_detect 6
[ 8.796403] Using Buffer DMA mode
[ 8.796419] Periodic Transfer Interrupt Enhancement - disabled
[ 8.796425] Multiprocessor Interrupt Enhancement - disabled
[ 8.796432] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 8.796438] ^^^^^^^^^^^^^^^^^Device Mode
[ 8.894272] es8323_mic_state_ctrl read: 0
[ 8.894289] mic_state_switch 0
[ 8.894297] hp_det = 0,insert hp
[ 8.894301] hp mic use intern
[ 9.287339] ***************vbus detect*****************
[ 9.289528] rk_battery_charger_detect_cb , battery_charger_detect 1
[ 9.466583] Using Buffer DMA mode
[ 9.466600] Periodic Transfer Interrupt Enhancement - disabled
[ 9.466607] Multiprocessor Interrupt Enhancement - disabled
[ 9.466614] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 9.466620] ^^^^^^^^^^^^^^^^^Device Mode
[ 9.466660] *******************soft connect!!!*******************
[ 9.584171] USB RESET
[ 9.621746] android_work: sent uevent USB_STATE=CONNECTED
[ 9.625342] USB RESET
[ 9.698655] android_usb gadget: high-speed config #1: android
[ 9.698760] android_work: sent uevent USB_STATE=CONFIGURED