|
|
【求助】rk3288 在5.1平台 想要将OV13850改为4lane，改何如入手？
发表于 2016-9-6 11:38:42
浏览：7158
|
回复：5
打印
只看该作者
[复制链接]
楼主
本帖最后由 amnesia 于 2016-9-6 11:41 编辑
看之前的案例应该是要修改cam_board_rk3288.xml部分，但是修改如下摄像头无图像，不知道从何下手，
<Sensor>
<SensorName name="OV13850"></SensorName>
<SensorDevID IDname="CAMSYS_DEVID_SENSOR_1B"></SensorDevID>
<SensorHostDevID busnum="CAMSYS_DEVID_MARVIN" ></SensorHostDevID>
<SensorI2cBusNum busnum="3"></SensorI2cBusNum>
<SensorI2cAddrByte byte="2"></SensorI2cAddrByte>
<SensorI2cRate rate="100000"></SensorI2cRate>
<SensorMclk mclk="24000000"></SensorMclk>
<SensorAvdd name="NC" min="0" max="0"></SensorAvdd>
<SensorDvdd name="NC" min="0" max="0"></SensorDvdd>
<SensorGpioPwdn ioname="RK30_PIN2_PB6" active="0"></SensorGpioPwdn>
<SensorGpioRst ioname="RK30_PIN2_PB7" active="0"></SensorGpioRst>
<SensorGpioPwen ioname="RK30_PIN0_PB3" active="1"></SensorGpioPwen>
<SensorFacing facing="back"></SensorFacing>
<SensorInterface interface="MIPI"></SensorInterface>
<SensorMirrorFlip mirror="0"></SensorMirrorFlip>
<SensorOrientation orientation="180"></SensorOrientation>
<SensorPowerupSequence seq="1234"></SensorPowerupSequence>
<SensorFovParemeter h="60.0" v="60.0"></SensorFovParemeter>
<SensorAWB_Frame_Skip fps="15"></SensorAWB_Frame_Skip>
<SensorPhy phyMode="CamSys_Phy_Mipi" lane="4" phyIndex="1" sensorFmt="CamSys_Fmt_Raw_10b"></SensorPhy>
</Sensor> |
|
