|
【Linux】
升级Ubuntu14.04自编译固件失败
发表于 2018-7-6 05:01:20
浏览:10279
|
回复:9
打印
只看该作者
[复制链接]
楼主
大家好,
我首先安装默认的Firefly-RK3288_Ubuntu14.04_201803201135.img 成功。
然后利用 firefly提供的android 5.1 SDK 的内核自己编译生成resource.img, kernel.img and boot.img 但是主板启动失败(启动信息死循环),请看启动信息如下, 请问应该如何解决?
U-Boot 2014.10-RK3288-02 (Nov 26 2014 - 09:28:44)
CPU: rk3288
CPU's clock information:
arm pll = 600000000HZ
periph pll = 300000000HZ
ddr pll = 200000000HZ
codec pll = 594000000HZ
Board: Rockchip platform Board
DRAM: Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment
GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
power key: bank-0 pin-5
can't find dts node for ricoh619
pmic:act8846
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0
#Boot ver: 2014-11-26#2.17
empty serial no.
checkKey
vbus = 1
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
Hit any key to stop autoboot: 0
kernel @ 0x02000000 (0x00722b00)
ramdisk @ 0x04bf0000 (0x00299cf2)
Secure Boot state: 0
bootrk: do_bootm_linux...
Loading Device Tree to 04804000, end 04826b60 ... OK
Add bank:0000000000000000, 0000000080000000
Starting kernel ...
|
|