Core-3288J核心板开机后特别不稳定，请问是什么原因

whhk

Core-3288J核心板开机后特别不稳定，画面闪动，会自动重启。
log里显示说mmc有问题，感觉无从下手。

Version 1.00 20160530
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT


U-Boot 2014.10-RK3288-10 (May 30 2018 - 16:38:11)

CPU: rk3288
cpu version = 0
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:        Rockchip platform Board
DRAM:  Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 400
SdmmcInit = 2 0
storage init OK!
Using default environment

GetParam
Load FDT from resource image.
power key: bank-0 pin-5
pmic:act8846
can't find dts node for pwm1
DCDC vdd_logic has been used, pwm regulator not init it.
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2018-05-30#2.30
empty serial no.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
read logo on state from dts [1]
pll_src = 0, dclk_hz = 65000000, dclk_div = 6
no fuel gauge found
Hit any key to stop autoboot:  0
load fdt from resouce.
ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!
Secure Boot state: 0
kernel   @ 0x02000000 (0x006a93c8)
ramdisk  @ 0x05bf0000 (0x001464d8)
bootrk: do_bootm_linux...
   Loading Device Tree to 05600000, end 0561c208 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (sujl@tchipserver2) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #28 SMP PREEMPT Wed Jul 11 10:36:00 CST 2018
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] rockchip_uboot_logo_setup: mem: 0x02000000@0x7dc00000, offset:0x00000000
[    0.000000] rockchip_uboot_mem_reserve: reserve 0x02000000@0x7dc00000 for uboot logo
[    0.000000] rockchip_ion_reserve
[    0.000000] ion heap(drm): base(0) size(0) align(0)
[    0.000000] ion heap(cma): base(0) size(1000000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 16 MiB at 7cc00000
[    0.000000] ion_reserve: cma reserved base 7cc00000 size 16777216
[    0.000000] cma: CMA: reserved 16 MiB at 1f000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1f1e000 s13376 r8192 d15296 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523264
[    0.000000] Kernel command line: vmalloc=496M console=ttyS2 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init  mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00300000@0x00092000(system),0x00008000@0x00392000(metadata),0x00002000@0x0039A000(baseparamer),-@0x003BC000(userdata) storagemedia=emmc uboot_logo=0x02000000@0x7dc00000 loader.timestamp=2018-05-30_16:38:11
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 1993656k/1993656k available, 103496k reserved, 1523712K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0bb3b78   (11951 kB)
[    0.000000]       .init : 0xc0bb4000 - 0xc0c0d440   ( 358 kB)
[    0.000000]       .data : 0xc0c0e000 - 0xc0da0680   (1610 kB)
[    0.000000]        .bss : 0xc0da0680 - 0xc0ec3c3c   (1166 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]         RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start!
[    0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
[    0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 1
[    0.000000] rkclk_init_clks: cnt_parent = 7
[    0.000000] rkclk_init_clks: cnt_rate = 29
[    0.000000] rk3288 set GPLL BW 20 for HDMI!
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 1
[    0.000000] channel:0, lkg:41
[    0.000000] target-temp:80
[    0.000000] channel:2, lkg:0
[    0.000000] channel:0, lkg:41
[    0.000000] channel:1, lkg:29
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.494193] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.494209] pid_max: default: 32768 minimum: 301
[    0.494325] Security Framework initialized
[    0.494341] SELinux:  Initializing.
[    0.494413] Mount-cache hash table entries: 512
[    0.495056] Initializing cgroup subsys debug
[    0.495072] Initializing cgroup subsys memory
[    0.495098] Initializing cgroup subsys freezer
[    0.495126] CPU: Testing write buffer coherency: ok
[    0.495449] /cpus/cpu@0 missing clock-frequency property
[    0.495463] /cpus/cpu@1 missing clock-frequency property
[    0.495472] /cpus/cpu@2 missing clock-frequency property
[    0.495482] /cpus/cpu@3 missing clock-frequency property
[    0.495538] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.495590] Setting up static identity map for 0xc0863668 - 0xc08636c0
[    0.497930] last_log: 0x1e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x17e0 (version 3.1)
[    0.572347] CPU1: Booted secondary processor
[    0.572379] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.592022] CPU2: Booted secondary processor
[    0.592045] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.611727] CPU3: Booted secondary processor
[    0.611750] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.611850] Brought up 4 CPUs
[    0.611879] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.611888] CPU: All CPU(s) started in SVC mode.
[    0.612621] devtmpfs: initialized
[    0.617085] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.618189] pinctrl core: initialized pinctrl subsystem
[    0.618442] regulator-dummy: no parameters
[    0.632448] NET: Registered protocol family 16
[    0.634289] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.634659] ion_snapshot: 0x1ea98000 map to 0xe0907000 and copy to 0xc0e9eecc (version 0.1)
[    0.634898] Registered FIQ tty driver
[    0.635300] fiq-debugger is disabled in device tree
[    0.636024] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[    0.636045] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[    0.636062] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[    0.636079] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[    0.636169] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[    0.636232] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[    0.636293] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[    0.636355] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[    0.636415] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[    0.636478] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[    0.636539] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[    0.636600] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[    0.636668] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[    0.636732] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[    0.636745] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[    0.636757] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[    0.636768] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[    0.637384] rockchip_interrupts_register:bank_num=7
[    0.639308] of_get_gpio_init_config:gpio[0] = 136, value = 0
[    0.639329] of_get_gpio_init_config:gpio[1] = 13, value = 1
[    0.639383] rockchip_pinctrl_probe:init ok
[    0.646437] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.646524] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.646537] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.646705] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.646782] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.646795] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.646956] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.647025] rk_iommu ff930300.vopb_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.647037] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.647196] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[    0.647274] rk_iommu ff940300.vopl_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.647287] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.647455] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.647528] rk_iommu ff9c0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.647541] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.647703] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.647784] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.647797] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.647968] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.648053] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.648065] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[    0.649737] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.649750] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.650333] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
[    0.650356] DDR DEBUG: version 1.00 20150126
[    0.650385] DDR DEBUG: Channel a:
[    0.650393] DDR DEBUG: DDR3 Device
[    0.650406] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.650414] DDR DEBUG: Channel b:
[    0.650422] DDR DEBUG: DDR3 Device
[    0.650434] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.650443] DDR DEBUG: addr=0xdaa000
[    0.650453] DDR DEBUG: stride=9, size=256, halfcap=40000000
[    0.650461] DDR DEBUG: socAddr[0]=0xdaa000, socAddr[1]=0xdaa100
[    0.650470] DDR DEBUG: chAddr[0]=0xdaa000, chAddr[1]=0xdaa000
[    0.650481] DDR DEBUG: dtar[0]=0x201b5000, dtar[1]=0x201b5000
[    0.650535] DDR DEBUG: init success!!! freq=200MHz
[    0.650543] DDR DEBUG: Channel a:
[    0.650556] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.650569] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.650581] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.650594] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.650606] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.650615] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.650624] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.650631] DDR DEBUG: Channel b:
[    0.650643] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.650656] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.650668] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.650681] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.650693] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.650702] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19    0.675749] bio: create slab <bio-0> at 0
[    0.676287] Rockchip hdmi driver version 2.0
[    0.676287] .
[    0.677456] SCSI subsystem initialized
[    0.677613] usbcore: registered new interface driver usbfs
[    0.677658] usbcore: registered new interface driver hub
[    0.677748] usbcore: registered new device driver usb
[    0.680019] host_en_gpio= -2
[    0.682434] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.683078] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.683516] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.683760] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[    0.684386] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.684504] media: Linux media interface: v0.10
[    0.684543] Linux video capture interface: v2.00
[    0.684606] pps_core: LinuxPPS API ver. 1 registered
[    0.684616] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.684635] PTP clock support registered
[    0.684691] i2c-core: driver [bq24296] using legacy suspend method
[    0.684700] i2c-core: driver [bq24296] using legacy resume method
[    0.685023] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
[    0.685505] ion_drm_heap_create: 0@0
[    0.685640] Rockchip ion module is successfully loaver Initialized.
[    0.686219] Bluetooth: Core ver 2.16
[    0.686257] NET: Registered protocol family 31
[    0.686266] Bluetooth: HCI device and connection manager initialized
[    0.686283] Bluetooth: HCI socket layer initialized
[    0.686296] Bluetooth: L2CAP socket layer initialized
[    0.686322] Bluetooth: SCO socket layer initialized
[    0.686555] cfg80211: Calling CRDA to update world regulatory domain
[    0.687243] act8846_i2c_probe,line=898
[    0.688260] act8846_parse_dt,line=746
[    0.688705] act8846_i2c_probe: act8846_pmic_hold=1
[    0.688726] act8846_i2c_probe: act8846_pmic_sleep=1
[    0.688742] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
[    0.688757] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
[    0.690852] act_dcdc1: 1200 mV
[    0.693828] vccio: 3300 mV
[    0.695685] vdd_logic: 700 <--> 1500 mV at 1100 mV
[    0.698665] act_dcdc4: 2000 mV
[    0.699900] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[    0.702200] act_ldo2: 1050 mV
[    0.704505] act_ldo3: 3300 mV
[    0.706805] act_ldo4: 3300 mV
[    0.709109] act_ldo5: 3300 mV
[    0.711505] act_ldo6: 1100 mV
[    0.713811] vcc_18: 1800 mV
[    0.716123] act_ldo8: 1850 mV
[    0.720880] vdd_arm: 712 <--> 1500 mV at 1000 mV
[    0.725579] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[    0.726337] rk808_i2c_probe,line=1355
[    0.727664] The device is not rk808 -11
[    0.727749] rk808: probe of 0-001b failed with error -11
[    0.727825] i2c-core: driver [rk818] using legacy suspend method
[    0.727835] i2c-core: driver [rk818] using legacy resume method
[    0.729786] Switching to clocksource arch_sys_counter
[    0.753568] rga: Module initialized.
[    0.754297] rga2 ff920000.rga: rga ion client create success!
[    0.754456] rga: Driver loaded succesfully
[    0.754651] fb disp policy is box
[    0.754693] rk-fb rockchip-fb: rk fb ion client create success!
[    0.754705] rk-fb rockchip-fb: rockchip framebuffer driver probe
[    0.754998] rk-screen rk_screen.8: rockchip screen probe success
[    0.755265] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[    0.755623] rk32-edp ff970000.edp: screen is not edp!
[    0.755643] rk32-edp: probe of ff970000.edp failed with error -22
[    0.756152] pwr_ctr_name:lcd_en
[    0.756152] pwr_type:gpio
[    0.756152] gpio:227
[    0.756152] atv_val:1
[    0.756152] delay:10
[    0.756152]
[    0.756386] graphics fb0: rockchip framebuffer registerd:fb0
[    0.756684] graphics fb1: rockchip framebuffer registerd:fb1
[    0.756857] graphics fb2: rockchip framebuffer registerd:fb2
[    0.757021] graphics fb3: rockchip framebuffer registerd:fb3
[    0.757727] rk3288-lcdc lcdc0: lcdc0: dclk:65000000>>fps:58
[    0.757742] rk3288-lcdc lcdc0: wakeup from standby!
[    0.773283] alloc_buffer:ion_phy_addr=0x10000000
[    0.779639] fb0:phy:10000000>>vir:e0991000>>len:0xc00000
[    0.792188] rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1eab4000
[    0.792243] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[    0.792463] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[    0.792477] rk_fb_trsm_ops_get:un supported transmitter:0!
[    0.792740] graphics fb4: rockchip framebuffer registerd:fb4
[    0.793076] graphics fb5: rockchip framebuffer registerd:fb5
[    0.793249] graphics fb6: rockchip framebuffer registerd:fb6
[    0.793414] graphics fb7: rockchip framebuffer registerd:fb7
[    0.794232] unknow screen type: 0
[    0.794316] rk3288-lcdc lcdc1: lcdc1: dclk:65000000>>fps:649
[    0.794329] rk3288-lcdc lcdc1: wakeup from standby!
[    0.796208] fb4:phy:10000000>>vir:e0991000>>len:0xc00000
[    0.796222] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu enabled
[    0.797114] rockchip_set_mux:warning ignore bank num 15
[    0.797251] rockchip_set_mux:warning ignore bank num 15
[    0.797376] rockchip_set_mux:warning ignore bank num 15
[    0.797497] rockchip_set_mux:warning ignore bank num 15
[    0.797615] rockchip_set_mux:warning ignore bank num 15
[    0.797733] rockchip_set_mux:warning ignore bank num 15
[    0.798306] rockchip_set_mux:warning ignore bank num 15
[    0.798476] rockchip_set_mux:warning ignore bank num 15
[    0.799027] rockchip_set_mux:warning ignore bank num 15
[    0.799172] rockchip_set_mux:warning ignore bank num 15
[    0.799708] rockchip_set_mux:warning ignore bank num 15
[    0.799858] rockchip_set_mux:warning ignore bank num 15
[    0.800408] rockchip_set_mux:warning ignore bank num 15
[    0.800563] rockchip_set_mux:warning ignore bank num 15
[    0.801678] tc358749_hdmiin_probe!
[    0.860944] tc358749_hdmiin_probe OK!
[    0.861414] NET: Registered protocol family 2
[    0.862088] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.862164] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.862237] TCP: Hash tables configured (established 4096 bind 4096)
[    0.862291] TCP: reno registered
[    0.862307] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.862330] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.862519] NET: Registered protocol family 1
[    0.863149] Unpacking initramfs...
[    0.934225] Freeing initrd memory: 1304K (c5bf0000 - c5d36000)
[    0.935074] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    0.935634] vcodec_service: probe device ff9a0000.vpu_service
[    0.935837] vcodec_service: No reset resource define
[    0.936011] vcodec_service: ff9a0000.vpu_service: power on
[    0.936094] vcodec_service: probe device ff9a0000.vpu_service
[    0.936110] vcodec_service: checking hw id 4831
[    0.937197] vcodec_service: ff9a0000.vpu_service: power off...
[    0.937242] vcodec_service: done
[    0.937251] vcodec_service: init success
[    0.937318] vcodec_service: probe device ff9c0000.hevc_service
[    0.937657] vcodec_service: ff9c0000.hevc_service: power on
[    0.937724] vcodec_service: probe device ff9c0000.hevc_service
[    0.937738] vcodec_service: checking hw id 6867
[    0.938311] vcodec_service: ff9c0000.hevc_service: power off...
[    0.938353] vcodec_service: done
[    0.938361] vcodec_service: init success
[    0.938496] rknandbase v1.0 2014-03-31
[    0.938628] rknand: probe of ff400000.nandc failed with error -1
[    0.938737] rknand_driver:ret = 0
[    0.940696] audit: initializing netlink socket (disabled)
[    0.940747] type=2000 audit(0.450:1): initialized
[    0.941589] bounce pool size: 64 pages
[    0.946149] fuse init (API version 7.22)
[    0.946567] msgmni has been set to 952
[    0.948357] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.948373] io scheduler noop registered
[    0.948382] io scheduler deadline registered
[    0.948479] io scheduler cfq registered (default)
[    0.950090] rockchip-hdmiv2 ff980000.hdmi: rockchip hdmiv2 probe sucess.
[    0.950797] IEP Power ON
[    0.950849] iep ion client create success!
[    0.951293] rk_iommu ff900800.iep_mmu: rockchip_iommu_attach_dshell@firefly:/ $ evice: Attached new IOMMU with pgtable 0x1eaae000
[    0.951303] IEP Power OFF
[    0.951320] IEP Driver loaded succesfully
[    0.951425] Module initialized.
[    0.952272] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    0.952290] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    0.953629] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    0.953646] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    0.953938] pwm-voltage-regulator pwm_regulator.23: unable to request PWM, trying legacy API
[    0.953953] pwm-voltage-regulator pwm_regulator.23: unable to request legacy PWM
[    0.953962] pwm_regulator_probe:error
[    0.953982] platform pwm_regulator.23: Driver pwm-voltage-regulator requests probe deferral
[    0.954189] rk_serial.c v1.8 2014-03-04
[    0.954416] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    0.954600] serial ff180000.serial: membase e097e000
[    0.954762] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 88) is a rk29_serial.1
[    0.954927] serial ff190000.serial: membase e359c000
[    0.955069] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2
[    0.956780] console [ttyS2] enabled
[    0.956957] serial ff690000.serial: membase fed60000
[    0.957142] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 90) is a rk29_serial.3
[    0.957310] serial ff1b0000.serial: membase e359e000
[    0.960114] loop: module loaded
[    0.960484] zram: Created 1 device(s) ...
[    0.960571] i2c-core: driver [mpu6050B1] using legacy suspend method
[    0.960584] i2c-core: driver [mpu6050B1] using legacy resume method
[    0.960602] mpu_init: Probe name mpu6050B1
[    0.960756] ak8963_mod_init: Probe name ak8963_mod
[    0.961474] SCSI Media Changer driver v0.25
[    0.961780] dws->regs: e35be000
[    0.962976] rockchip_spi_probe:num_cs=2,bus_num=0,irq=76,freq=45692308 ok
[    0.963282] tun: Universal TUN/TAP device driver, 1.6
[    0.963297] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    0.963434] vmac_init.
[    0.964033] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    0.964049] stmmac_probe_config_dt: clock input/output? (input).
[    0.964062] stmmac_probe_config_dt: TX delay(0x23).
[    0.964073] stmmac_probe_config_dt: RX delay(0x19).
[    0.964123] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    0.964134] stmmc_pltfr_init:
[    0.964144] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[    0.964166] gmac_phy_reset: ERROR: Request pin stmmc_pltfr_init failed.
[    0.964177] stmmc_pltfr_init: init for RGMII
[    0.964188] tx delay=0x23
[    0.964188] rx delay=0x19
[    0.964204] tx delay=0x23
[    0.964204] rx delay=0x19
[    0.964655] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    0.964666]  Normal descriptors
[    0.964675]  Ring mode enabled
[    0.964686]  DMA HW capability register supported
[    0.964698]  RX Checksum Offload Engine supported (type 2)
[    0.964708]  TX Checksum insertion supported
[    0.964717]  Wake-Up On Lan supported
[    0.964753]  Enable RX Mitigation via HW Watchdog Timer
[    0.965203] PPP generic driver version 2.4.2
[    0.965364] PPP BSD Compression module registered
[    0.965377] PPP Deflate Compression module registered
[    0.965401] PPP MPPE Compression module registered
[    0.965414] NET: Registered protocol family 24
[    0.965452] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    0.965465] CSLIP: code copyright 1989 Regents of the University of California.
[    0.965478] Rockchip WiFi SYS interface (V1.00) ...
[    0.965511] esp_mem_init enter date May 30 2018 16:39:38
[    0.965522] esp_mem_init VERSION [V2.5]
[    0.965570] esp_mem_init complete
[    0.965655] usbcore: registered new interface driver catc
[    0.965696] usbcore: registered new interface driver kaweth
[    0.965709] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    0.965749] usbcore: registered new interface driver pegasus
[    0.965787] usbcore: registered new interface driver rtl8150
[    0.965826] usbcore: registered new interface driver r8152
[    0.965837] hso: drivers/net/usb/hso.c: Option Wireless
[    0.965909] usbcore: registered new interface driver hso
[    0.965954] usbcore: registered new interface driver asix
[    0.966020] usbcore: registered new interface driver ax88179_178a
[    0.966064] usbcore: registered new interface driver cdc_ether
[    0.966103] usbcore: registered new interface driver cdc_eem
[    0.966140] usbcore: registered new interface driver dm9601
[    0.966182] usbcore: registered new interface driver dm9620
[    0.966230] usbcore: registered new interface driver smsc75xx
[    0.966277] usbcore: registered new interface driver smsc95xx
[    0.966318] usbcore: registered new interface driver gl620a
[    0.966357] usbcore: registered new interface driver net1080
[    0.966395] usbcore: registered new interface driver plusb
[    0.966439] usbcore: registered new interface driver rndis_host
[    0.966490] usbcore: registered new interface driver cdc_subset
[    0.966531] usbcore: registered new interface driver zaurus
[    0.966588] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    0.966654] usbcore: registered new interface driver int51x1
[    0.966695] usbcore: registered new interface driver kalmia
[    0.966739] usbcore: registered new interface driver ipheth
[    0.966787] usbcore: registered new interface driver sierra_net
[    0.966829] usbcore: registered new interface driver cx82310_eth
[    0.966878] usbcore: registered new interface driver cdc_ncm
[    0.966918] usbcore: registered new interface driver qmi_wwan
[    0.966957] usbcore: registered new interface driver cdc_mbim
[    0.966970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.969440] EHCI: ehci_rk_probe e3640000 e3640010
[    0.969459] rockchip_ehci_host ff500000.usb: EHCI Host Controller
[    0.969491] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    0.969868] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    0.985694] rockchip_ehci_host ff500000.usb: USB 2.0 started, EHCI 1.00
[    0.985775] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.985792] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.985807] usb usb1: Product: EHCI Host Controller
[    0.985820] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    0.985833] usb usb1: SerialNumber: ff500000.usb
[    0.986312] hub 1-0:1.0: USB hub found
[    0.986345] hub 1-0:1.0: 1 port detected
[    0.986513] EHCI: ehci_rk_probe ok
[    0.986625] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.986935] usbcore: registered new interface driver cdc_acm
[    0.986949] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    0.987010] usbcore: registered new interface driver usblp
[    0.987054] usbcore: registered new interface driver cdc_wdm
[    0.987122] usbcore: registered new interface driver usb-storage
[    0.987165] usbcore: registered new interface driver ums-alauda
[    0.987204] usbcore: registered new interface driver ums-cypress
[    0.987244] usbcore: registered new interface driver ums-datafab
[    0.987282] usbcore: registered new interface driver ums_eneub6250
[    0.987320] usbcore: registered new interface driver ums-freecom
[    0.987360] usbcore: registered new interface driver ums-isd200
[    0.987407] usbcore: registered new interface driver ums-jumpshot
[    0.987448] usbcore: registered new interface driver ums-karma
[    0.987488] usbcore: registered new interface driver ums-onetouch
[    0.987528] usbcore: registered new interface driver ums-sddr09
[    0.987569] usbcore: registered new interface driver ums-sddr55
[    0.987608] usbcore: registered new interface driver ums-usbat
[    0.987703] usbcore: registered new interface driver usbserial
[    0.987745] usbcore: registered new interface driver usbserial_generic
[    0.987784] usbserial: USB Serial support registered for generic
[    0.987828] usbcore: registered new interface driver ch341
[    0.987860] usbserial: USB Serial support registered for ch341-uart
[    0.987902] usbcore: registered new interface driver cp210x
[    0.987934] usbserial: USB Serial support registered for cp210x
[    0.987980] usbcore: registered new interface driver option
[    0.988011] usbserial: USB Serial support registered for GSM modem (1-port)
[    0.988080] usbcore: registered new interface driver pl2303
[    0.988112] usbserial: USB Serial support registered for pl2303
[    0.988166] usbcore: registered new interface driver trancevibrator
[    0.988178] usb20_otg: version 3.10a 21-DEC-2012
[    0.988632] e3680040
[    0.988646] Core Release: 3.10a
[    0.988657] Setting default values for core params
[    0.988788] Using Buffer DMA mode
[    0.988801] Periodic Transfer Interrupt Enhancement - disabled
[    0.988812] Multiprocessor Interrupt Enhancement - disabled
[    0.988824] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.988835] ^^^^^^^^^^^^^^^^^Device Mode
[    0.988848] Dedicated Tx FIFOs mode
[    0.988867] pcd_init otg_dev = ddf3e200
[    0.989021] usb20_otg ff580000.usb: DWC OTG Controller
[    0.989049] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    0.989080] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    0.989138] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.989155] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.989170] usb usb2: Product: DWC OTG Controller
[    0.989183] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    0.989196] usb usb2: SerialNumber: ff580000.usb
[    0.989613] hub 2-0:1.0: USB hub found
[    0.989638] hub 2-0:1.0: 1 port detected
[    0.995685] usb20_host: version 3.10a 21-DEC-2012
[    0.998204] e3700040
[    0.998216] Core Release: 3.10a
[    0.998227] Setting default values for core params
[    0.998358] Using Buffer DMA mode
[    0.998370] Periodic Transfer Interrupt Enhancement - disabled
[    0.998380] Multiprocessor Interrupt Enhancement - disabled
[    0.998403] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.998414] ^^^^^^^^^^^^^^^^^^Host Mode
[    0.998444] usb20_host ff540000.usb: DWC OTG Controller
[    0.998471] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    0.998502] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    0.998595] Init: Power Port (0)
[    0.998651] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.998667] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.998682] usb usb3: Product: DWC OTG Controller
[    0.998694] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    0.998708] usb usb3: SerialNumber: ff540000.usb
[    0.999115] hub 3-0:1.0: USB hub found
[    0.999137] hub 3-0:1.0: 1 port detected
[    0.999865] usbcore: registered new interface driver xpad
[    0.999939] usbcore: registered new interface driver usb_acecad
[    0.999999] usbcore: registered new interface driver aiptek
[    1.000054] usbcore: registered new interface driver gtco
[    1.000103] usbcore: registered new interface driver hanwang
[    1.000149] usbcore: registered new interface driver kbtab
[    1.000199] usbcore: registered new interface driver wacom
[    1.000209] ==gsl_ts_init==
[    1.000301] GSLX680 Enter gsl_ts_probe
[    1.088255] Using Buffer DMA mode
[    1.088270] Periodic Transfer Interrupt Enhancement - disabled
[    1.088280] Multiprocessor Interrupt Enhancement - disabled
[    1.088291] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.088302] ^^^^^^^^^^^^^^^^^^Host Mode
[    1.133349] Init: Power Port (0)
[    1.133363] rk_battery_charger_detect_cb , battery_charger_detect 5
[    1.536726] gsl_ts_probe--1318, i2c_master_recv fail
[    1.536747] gslX680: probe of 4-0041 failed with error -11
[    1.536790] ret=0
[    1.537074] sensor_register_slave:mma8452,id=17
[    1.537088] sensor_register_slave:gs_mc3230,id=23
[    1.537099] gsensor_init
[    1.537109] sensor_register_slave:mpu6880_acc,id=24
[    1.537120] sensor_register_slave:mpu6500_acc,id=25
[    1.537132] sensor_register_slave:cm3217,id=48
[    1.537143] sensor_register_slave:cm3218,id=49
[    1.537374] .. rk pwm remotectl v1.1 init
[    1.537625] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[    1.540994] rtc_hym8563 0-0051: clock/calendar information is no longer guaranteed
[    1.551664] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    1.553325] i2c /dev entries driver
[    1.554010] IR NEC protocol handler initialized
[    1.554024] IR RC5(x) protocol handler initialized
[    1.554035] IR RC6 protocol handler initialized
[    1.554045] IR JVC protocol handler initialized
[    1.554055] IR Sony protocol handler initialized
[    1.554064] IR RC5 (streamzap) protocol handler initialized
[    1.554075] IR SANYO protocol handler initialized
[    1.554084] IR MCE Keyboard/mouse protocol handler initialized
[    1.554244] usbcore: registered new interface driver uvcvideo
[    1.554256] USB Video Class driver (1.1.1)
[    1.554269] CamSys driver version: v0.32.0,  CamSys head file version: v0.11.0
[    1.555766] D1:camsys_platform_probe(1300): 1-gpios-cifpower: gpio=236
[    1.555791] D1:camsys_platform_probe(1303): gpios-cifpower: gpio_request
[    1.555812] D1:camsys_platform_probe(1305): 1-gpios-cifpower: gpio_request=0
[    1.555833] D1:camsys_platform_probe(1314): gpios-cifpower: 236 high
[    1.555872] D1:camsys_mipiphy_probe_cb(115): compatible is rockchip,rk3288
[    1.555872]
[    1.555954] D1:camsys_mipiphy_probe_cb(186): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[    1.556126] D1:camsys_mipiphy_probe_cb(183): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xe35f8000  size: 0x4000)
[    1.556808] D1:camsys_platform_probe(1446): ff910000.isp memory:
[    1.556826] D1:camsys_platform_probe(1456):     Register memory (phy: 0xff910000 vir: 0xe3620000 size: 0x10000)
[    1.556843] D1:camsys_platform_probe(1451):     I2c memory (phy: 0x1dfcb000 vir: 0xddfcb000 size: 0x1000)
[    1.556859] D1:camsys_init_ext_fsh_module(20): init external flash module
[    1.556872] D1:camsys_platform_probe(1471): Probe ff910000.isp device success
[    1.557268] not find test_power_init dev node
[    1.557325] i2c-core: driver [bq27320] using legacy suspend method
[    1.557338] i2c-core: driver [bq27320] using legacy resume method
[    1.557698] rockchip_temp_probe,line=364
[    1.615461] tsadc ff280000.tsadc: initialized
[    1.615831] device-mapper: uevent: version 1.0.3
[    1.616082] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.616373] Bluetooth: HCI UART driver ver 2.2
[    1.616389] Bluetooth: HCI H4 protocol initialized
[    1.616401] Bluetooth: HCILL protocol initialized
[    1.616413] rtk_btusb: Realtek Bluetooth USB driver module init, version 2.21
[    1.616425] rtk_btusb: Register usb char device interface for BT driver
[    1.616612] usbcore: registered new interface driver rtk_btusb
[    1.620021] cpufreq version 1.0, suspend freq 1200 MHz
[    1.620217] cpuidle: using governor ladder
[    1.620230] cpuidle: using governor menu
[    1.620268] Synopsys Designware Multimedia Card Interface Driver
[    1.620279] MHSC version = Ver 2.00 2015-06-10
[    1.620597] dw cru_regsbase addr 0x1d8.
[    1.620610] dw cru_reset_offset val 3.
[    1.620625] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    1.620669] dwmmc_rockchip ff0f0000.rksdmmc: failed to get hpclk_mmc
[    1.620971] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[    1.621134] dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[    1.621275] 1358..dw_mci_set_ios:  no card. [mmc0]
[    1.635140] 1358..dw_mci_set_ios:  no card. [mmc0]
[    1.654843] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    1.654865] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    1.654882] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    1.655209] dw cru_regsbase addr 0x1d8.
[    1.655222] dw cru_reset_offset val 0.
[    1.655237] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    1.655272] dwmmc_rockchip ff0c0000.rksdmmc: failed to get hpclk_mmc
[    1.656041] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    1.656205] dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
[    1.656705] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[    1.656771] 1358..dw_mci_set_ios:  no card. [mmc1]
[    1.674493] 1358..dw_mci_set_ios:  no card. [mmc1]
[    1.686963] mmc0: BKOPS_EN bit is not set
[    1.688832] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
[    1.691110] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[    1.691134] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    1.691154] [mmc0] tuning regsbase addr 0x218.
[    1.691902] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    1.691913] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
[    1.691943] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    1.691955] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    1.691966] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    1.691977] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    1.692018] mmc0: new HS200 MMC card at address 0001
[    1.692293] mmcblk0: mmc0:0001 AJTD4R 14.5 GiB
[    1.692416] mmcblk0rpmb: mmc0:0001 AJTD4R partition 3 4.00 MiB
[    1.692738]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    1.692752]       misc: 0x000800000 -- 0x000c00000 (4 MB)
[    1.692761]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    1.692770]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[    1.692778]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
[    1.692787]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[    1.692795]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
[    1.692804]      cache: 0x00a000000 -- 0x012000000 (128 MB)
[    1.692812]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
[    1.692820]     system: 0x012400000 -- 0x072400000 (1536 MB)
[    1.692829]   metadata: 0x072400000 -- 0x073400000 (16 MB)
[    1.692837] baseparamer: 0x073400000 -- 0x073800000 (4 MB)
[    1.692846]   userdata: 0x077800000 -- 0x3a3a00000 (12994 MB)
[    1.692870]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13[    1.694209] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    1.694224] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]
[    1.694543] dw cru_regsbase addr 0x1d8.
[    1.694551] dw cru_reset_offset val 1.
[    1.694561] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    1.694598] dwmmc_rockchip ff0d0000.rksdmmc: failed to get hpclk_mmc
[    1.694836] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    1.694966] dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    1.695232] 1358..dw_mci_set_ios:  no card. [mmc2]
[    1.713844] 1358..dw_mci_set_ios:  no card. [mmc2]
[    1.733575] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    1.733588] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    1.733876] leds-gpio leds.28: pins are not configured from the driver
[    1.734139] hidraw: raw HID events driver (C) Jiri Kosina
[    1.735575] usbcore: registered new interface driver usbhid
[    1.735586] usbhid: USB HID core driver
[    1.735698] ashmem: initialized
[    1.735821] logger: created 256K log 'log_main'
[    1.735912] logger: created 256K log 'log_events'
[    1.736007] logger: created 256K log 'log_radio'
[    1.736104] logger: created 256K log 'log_system'
[    1.737220] input: rk29-keypad as /devices/ff100000.adc/key.30/input/input1
[    1.738087] rockchip-pinctrl ff770000.pinctrl: pin gpio6-8 already requested by ff890000.rockchip-i2s; cannot claim for 2-0010
[    1.738104] rockchip-pinctrl ff770000.pinctrl: pin-200 (2-0010) status -22
[    1.738116] rockchip-pinctrl ff770000.pinctrl: could not request pin 200 on device rockchip-pinctrl
[    1.738128] ES8323 2-0010: Error applying setting, reverse things back
[    1.738176] es8323_adc = 0
[    1.738192] jp es8323_line_det_gpio:79
[    1.738860] es8323 probe error
[    1.738877] ES8323: probe of 2-0010 failed with error -11
[    1.739613] rockchip-spdif ff880000.rockchip-spdif: spdif ready.
[    1.740134] rockchip-es8323 rockchip-es8323.27: ASoC: CODEC (null) not registered
[    1.740165] rockchip_es8323_audio_probe() register card failed:-517
[    1.740182] platform rockchip-es8323.27: Driver rockchip-es8323 requests probe deferral
[    1.740351] u32 classifier
[    1.740360]     Actions configured
[    1.740373] Netfilter messages via NETLINK v0.30.
[    1.740432] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.740780] ctnetlink v0.93: registering with nfnetlink.
[    1.740855] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    1.740863] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    1.741159] xt_time: kernel timezone is -0000
[    1.741371] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.741506] arp_tables: (C) 2002 David S. Miller
[    1.741551] TCP: cubic registered
[    1.741558] Initializing XFRM netlink socket
[    1.741790] NET: Registered protocol family 10
[    1.742334] mip6: Mobile IPv6
[    1.742364] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.742489] sit: IPv6 over IPv4 tunneling driver
[    1.742844] NET: Registered protocol family 17
[    1.742875] NET: Registered protocol family 15
[    1.742930] Bridge firewalling registered
[    1.742943] Ebtables v2.0 registered
[    1.743108] Bluetooth: RFCOMM TTY layer initialized
[    1.743137] Bluetooth: RFCOMM socket layer initialized
[    1.743146] Bluetooth: RFCOMM ver 1.11
[    1.743154] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.743162] Bluetooth: BNEP filters: protocol multicast
[    1.743174] Bluetooth: BNEP socket layer initialized
[    1.743183] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.743196] Bluetooth: HIDP socket layer initialized
[    1.743226] l2tp_core: L2TP core driver, V2.0
[    1.743242] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.743251] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.743486] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.743499] [WLAN_RFKILL]: can't find rockchip,grf property
[    1.743509] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[    1.743518] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.743528] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    1.743537] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    1.743561] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[    1.743583] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    1.743593] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    1.743621] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[    1.743631] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    1.743681] [BT_RFKILL]: Enter rfkill_rk_init
[    1.743828] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[    1.743853] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[    1.743870] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[    1.743886] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[    1.743940] [BT_RFKILL]: Request irq for bt wakeup host
[    1.744042] [BT_RFKILL]: ** disable irq
[    1.744119] [BT_RFKILL]: ap6335 device registered.
[    1.744977] rk3288_init_suspend
[    1.744991] rk3288_suspend_init enter
[    1.745197] rk3288_suspend_init: pm_ctrbits =200007
[    1.745235] gpio_get_dts_info suspend:4
[    1.745244] gpio_get_dts_info resume:4
[    1.745251] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    1.745284] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    1.745441] clks_gating_suspend_init:clkgt info ok
[    1.745532] Registering SWP/SWPB emulation handler
[    1.745546] rockchip_uboot_mem_late_init: Freeing uboot logo memory: 0x02000000@0x7dc00000
[    1.748823] ddrfreq: verion 1.2 20140526
[    1.748840] ddrfreq: normal 528MHz video_1080p 0MHz video_4k 456MHz dualview 0MHz idle 0MHz suspend 200MHz reboot 528MHz
[    1.748849] ddrfreq: auto-freq=0
[    1.748856] ddrfreq: auto-freq-table[0] 240MHz
[    1.748863] ddrfreq: auto-freq-table[1] 324MHz
[    1.748870] ddrfreq: auto-freq-table[2] 456MHz
[    1.748877] ddrfreq: auto-freq-table[3] 528MHz
[    1.752863] regulator-dummy: disabling
[    1.753396] rockchip-es8323 rockchip-es8323.27: ASoC: CODEC (null) not registered
[    1.753423] rockchip_es8323_audio_probe() register card failed:-517
[    1.753439] platform rockchip-es8323.27: Driver rockchip-es8323 requests probe deferral
[    1.753514] 11wk2xxx_probe: setup mode 0, 8 bits/w, 10000000 Hz max

[    1.920973] wk2xxx_probe()  GENA = 0xFF
[    1.920978] spi driver  error!!!!
[    1.920992] wk2xxxspi: probe of spi0.0 failed with error 1
[    1.921008] register spi return v = :0
[    1.921016] =======================================================
[    1.921021] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[    1.921026] =======================================================
[    1.921032]  WiFi driver (Powered by Rockchip,Ver 5.10.WFD.OOB.64bit) init.
[    1.921085] dhd_module_init: in
[    1.921092] ======== bcm_wlan_set_plat_data ========
[    1.921098] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[    1.921113] host_oob_irq: 196

[    1.921117] host_oob_irq_flags=4
[    1.921122] dhd_wifi_platform_load: Enter
[    1.921135] Power-up adapter 'DHD generic adapter'
[    1.921140] pcd_pullup, is_on 0
[    1.921152] WARN::dwc_otg_handle_mode_mismatch_intr:69: Mode Mismatch Interrupt: currently in Host mode
[    1.921152]
[    1.921160] wifi_platform_set_power = 1
[    1.921163] ======== PULL WL_REG_ON HIGH! ========
[    1.921167] [WLAN_RFKILL]: rockchip_wifi_power: 1
[    1.921171] file system registered
[    1.921174] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 1
[    1.921178] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[    1.921639] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    1.921647] android_usb gadget: Number of LUNs=2
[    1.921654]  lun0: LUN: removable file: (no medium)
[    1.921660]  lun1: LUN: removable file: (no medium)
[    1.921795] android_usb gadget: android_usb ready
[    1.921893] i2c i2c-4: sensor_probe: gs_mc3230,debd1800
[    1.921919] sensor_chip_init:gs_mc3230:devid=0x0,ops=0xc0d25ca0
[    1.981235] [Gsensor] init_3230_ctl_data 671 : error: -11
[    1.981722] sensor_active:line=1500,error
[    1.981728] sensor_init:line=1548,error
[    1.981733] sensor_initial:fail to init sensor
[    1.981738] sensor_chip_init:fail to init sensor
[    1.981745] i2c i2c-4: sensor_probe failed -11
[    1.981745]
[    1.981758] sensors: probe of 4-004c failed with error -11
[    1.981777] sensor_init: Probe name sensors
[    1.981793] sensor-dev.c v1.4 add angle calculation support between two gsensors 2013-09-01
[    1.983256] rtc_hym8563 0-0051: hctosys: invalid date/time
[    1.989245] rockchip-spdif-card rockchip-spdif-card.26:  rk-hdmi-spdif-hifi <-> ff880000.rockchip-spdif mapping ok
[    1.989824] rockchip-es8323 rockchip-es8323.27: ASoC: CODEC (null) not registered
[    1.989845] rockchip_es8323_audio_probe() register card failed:-517
[    1.989857] platform rockchip-es8323.27: Driver rockchip-es8323 requests probe deferral
[    1.990060] ret 1024
[    1.990420] usbcore: registered new interface driver snd-usb-audio
[    1.990428] ALSA device list:
[    1.990433]   #0: RK-SPDIF-CARD
[    1.990834] Freeing unused kernel memory: 356K (c0bb4000 - c0c0d000)
[    2.028719] [WLAN_RFKILL]: wifi turn on power. 156
[    2.235365] wifi_platform_bus_enumerate device present 1
[    2.235377] ======== Card detection to detect SDIO card! ========
[    2.235387] mmc2:mmc host rescan start!
[    2.248140] type=1403 audit(1.780:2): policy loaded auid=4294967295 ses=4294967295
[    2.272134] init: invalid gid 'trace'
[    2.360870] init: /dev/hw_random not found
[    2.360924] keychord: using input dev ff680000.pwm for fevent
[    2.360936] keychord: using input dev rk29-keypad for fevent
[    2.365304] init: /dev/hw_random not found
[    2.366161] fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[    2.366893] resize2fs: resize2fs 1.42.9 (28-Dec-2013)resize2fs: The filesystem is already 393216 blocks long.  Nothing to do!resize2fs:
[    2.369204] EXT4-fs (mmcblk0p10): Ignoring removed nomblk_io_submit option
[    2.373163] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    2.373245] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/system,/system,ext4)=0
[    2.374013] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[    2.378637] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    2.378677] e2fsck: system: clean, 1908/86208 files, 117433/393216 blocks
[    2.382021] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[    2.382082] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/system,target=/system,type=ext4)=0
[    2.388742] EXT4-fs (mmcblk0p8): recovery complete
[    2.389099] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    2.389159] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/cache,target=/cache,type=ext4)=0
[    2.389484] EXT4-fs (mmcblk0p11): Ignoring removed nomblk_io_submit option
[    2.392905] EXT4-fs (mmcblk0p11): recovery complete
[    2.392920] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    2.392971] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,/metadata,ext4)=0
[    2.393704] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata
[    2.397617] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    2.397651] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/metadata: clean, 11/1024 files, 1102/4096 blocks
[    2.401314] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    2.401375] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/metadata,target=/metadata,type=ext4)=0
[    2.401414] fs_mgr: Running /system/bin/fsck.f2fs -f /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
[    2.402194] fsck.f2fs: executing /system/bin/fsck.f2fs failed: No such file or directory
[    2.402230] fsck.f2fs: fsck.f2fs terminated by exit(255)
[    2.402444] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=f2fs)=-1
[    2.402761] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
[    2.496405] EXT4-fs (mmcblk0p13): recovery complete
[    2.496768] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nomblk_io_submit,errors=remount-ro
[    2.496845] fs_mgr: check_fs(): mount(/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,/data,ext4)=0
[    2.498821] fs_mgr: Running /sbin/e2fsck on /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata
[    2.512113] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
[    2.512148] e2fsck: /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata: clean, 517/832320 files, 115635/3326464 blocks
[    2.515995] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard,errors=panic
[    2.516053] fs_mgr: __mount(source=/dev/block/platform/ff0f0000.rksdmmc/by-name/userdata,target=/data,type=ext4)=0
[    2.516072] fs_mgr: mount_with_alternatives(): Mounted /dev/block/platform/ff0f0000.rksdmmc/by-name/userdata on /data with fs_type=ext4 instead of f2fs
[    2.529446] arm_release_ver of this mali_ko is 'r6p0-02rel0', rk_ko_ver is '13', built at '09:15:10', on 'Oct 22 2015'.
[    2.529519] mali ffa30000.gpu: Continuing without Mali clock control
[    2.529562] mali pd enabled
[    2.529573] clk enabled
[    2.529584] MALI_DVFS_STEP = 4, div_dvfs = 10
[    2.529593] mali_dvfs_infotbl[0].clock=198000,min_threshold=0,max_threshold=70
[    2.529601] mali_dvfs_infotbl[1].clock=297000,min_threshold=70,max_threshold=80
[    2.529611] mali_dvfs_infotbl[2].clock=417000,min_threshold=80,max_threshold=90
[    2.529620] mali_dvfs_infotbl[3].clock=480000,min_threshold=94,max_threshold=100
[    2.529704] turn on mali power
[    2.529717] kbase_platform_rk_init,register_reboot_notifier
[    2.529756] hrtimer: interrupt took 10500 ns
[    2.529842] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
[    2.530504] mali ffa30000.gpu: Probed as mali0
[    2.530883] rockchip-es8323 rockchip-es8323.27: ASoC: CODEC (null) not registered
[    2.530911] rockchip_es8323_audio_probe() register card failed:-517
[    2.530925] platform rockchip-es8323.27: Driver rockchip-es8323 requests probe deferral
[    2.531518] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[    2.532156] rk29_ipp: version magic '3.0.36+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[    2.532715] rk29_ipp: version magic '3.0.101+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[    2.533509] zram0: detected capacity change from 0 to 533413888
[    2.578380] Adding 520908k swap on /dev/block/zram0.  Priority:-1 extents:1 across:520908k SS
[    2.610795] EXT4-fs (mmcblk0p13): Unrecognized mount option "background_gc=on" or missing value
[    2.617910] drmboot: module license 'unspecified' taints kernel.
[    2.617929] Disabling lock debugging due to kernel taint
[    2.618131] drm init, 20140910
[    2.618561] drm init ok
[    2.620052] bat_cap: oldcap path is /sys/devices/ff100000.adc
[    2.620096] bat_cap: oldcap_path no exist
[    2.620276] binder: 154:154 transaction failed 29189, size 0-0
[    2.620763] init: Warning!  Service displayd needs a SELinux domain defined; please fix!
[    2.625067] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    2.625103] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    2.625114] type=1400 audit(2.160:3): avc:  denied  { transition } for  pid=160 comm="init" path="/system/xbin/vm" dev="mmcblk0p10" ino=1907 scontext=u:r:init:s0 tcontext=u:r:su:s0 tclass=process permissive=1
[    2.625313] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[    2.625730] rtk_btusb: btchr_open: BT usb char device is opening
[    2.625744] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    2.625764] rtk_btusb: btchr_open: BT usb char device is opening
[    2.625773] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    2.625795] rtk_btusb: btchr_open: BT usb char device is opening
[    2.625805] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    2.625834] rtk_btusb: btchr_open: BT usb char device is opening
[    2.625844] rtk_btusb: btchr_open: Failed to get hci dev[NULL]
[    2.651342] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[    2.655839] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
[    2.656227] init: cannot find '/system/bin/bplus_helper', disabling 'bplus_helper'
[    2.656420] init: Warning!  Service drmservice needs a SELinux domain defined; please fix!
[    2.658295] android_usb: already disabled
[    2.664058] logd.auditd: start
[    2.665611] read descriptors
[    2.665623] read strings
[    2.665645] mtp_bind_config
[    2.665671] pcd_pullup, is_on 1
[    2.789156] RKNAND_GET_SN_SECTOR
[    2.789169] return ret = 0
[    2.819537] RKNAND_GET_DRM_KEY
[    2.819548] return ret = 0
[    2.963528] EHCI: rk_ehci_hcd_enable, disable host controller
[    3.011130] type=1400 audit(2.550:4): avc: denied { rlimitinh } for pid=160 comm="vm" scontext=u:r:init:s0 tcontext=u:r:su:s0 tclass=process permissive=1
[    3.011224] type=1400 audit(2.550:5): avc: denied { siginh } for pid=160 comm="vm" scontext=u:r:init:s0 tcontext=u:r:su:s0 tclass=process permissive=1
[    3.358298] avc:  denied  { set } for property=telephony.lteOnCdmaDevice scontext=u:r:rild:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
[    3.604838] healthd: No charger supplies found
[    3.604852] healthd: No battery devices found
[    4.154156] slot->flags = 1
[    4.154171] CPU: 0 PID: 6 Comm: kworker/u8:0 Tainted: P             3.10.0 #28
[    4.154186] Workqueue: kmmcd mmc_rescan
[    4.154204] [<c0013ec4>] (unwind_backtrace+0x0/0xe0) from [<c001176c>] (show_stack+0x10/0x14)
[    4.154217] [<c001176c>] (show_stack+0x10/0x14) from [<c05d69a4>] (dw_mci_set_ios+0x9c/0x214)
[    4.154229] [<c05d69a4>] (dw_mci_set_ios+0x9c/0x214) from [<c05c34a0>] (mmc_set_chip_select+0x18/0x1c)
[    4.154241] [<c05c34a0>] (mmc_set_chip_select+0x18/0x1c) from [<c05c7968>] (mmc_go_idle+0x94/0xc4)
[    4.154251] [<c05c7968>] (mmc_go_idle+0x94/0xc4) from [<c05c3af4>] (mmc_rescan_try_freq+0x54/0xd0)
[    4.154262] [<c05c3af4>] (mmc_rescan_try_freq+0x54/0xd0) from [<c05c43bc>] (mmc_rescan+0x204/0x298)
[    4.154273] [<c05c43bc>] (mmc_rescan+0x204/0x298) from [<c005088c>] (process_one_work+0x29c/0x458)
[    4.154283] [<c005088c>] (process_one_work+0x29c/0x458) from [<c0050bdc>] (worker_thread+0x194/0x2d4)
[    4.154293] [<c0050bdc>] (worker_thread+0x194/0x2d4) from [<c00561bc>] (kthread+0xa0/0xac)
[    4.154305] [<c00561bc>] (kthread+0xa0/0xac) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[    4.154312] dw_mci_set_ios:  wait for unbusy timeout....... STATUS = 0x206 [mmc1]
[    4.203359] failed to power up DHD generic adapter, 0 retry left
[    4.219186] wifi_platform_set_power = 0
[    4.219192] ======== PULL WL_REG_ON LOW! ========
[    4.219199] [WLAN_RFKILL]: rockchip_wifi_power: 0
[    4.321445] [WLAN_RFKILL]: wifi shut off power.
[    4.321454] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: 0
[    4.321460] [WLAN_RFKILL]: rockchip_wifi_ref_voltage: wifi io reference voltage control is disabled.
[    4.321466] wifi_platform_bus_enumerate device present 0
[    4.321472] ======== Card detection to remove SDIO card! ========
[    4.321478] mmc2:mmc host rescan start!
[    4.321489] failed to power up DHD generic adapter, max retry reached**
[    4.321508] unregister wifi platform drivers
[    4.321514] wifi_platform_bus_enumerate device present 0
[    4.321518] ======== Card detection to remove SDIO card! ========
[    4.321524] mmc2:mmc host rescan start!
[    4.321531] dhd_module_init: Failed to load the driver, try cnt 0
[    4.321549] dhd_module_init: Failed to load driver max retry reached**
[    4.321555] dhd_module_init: Exit err=-19
[    4.673551] rk3288-lcdc lcdc0: blank mode:0
[    4.989302] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    4.989313] [mmc0] Data transmission error, need to try retuning 1.
[    4.989322] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008088]
[    4.989328] [mmc0] Data transmission error, need to try retuning 1.
[    4.989355] [mmc0] tuning regsbase addr 0x218.
[    4.990117] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    4.990128] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    4.990137] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    4.990143] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    4.990164] need_retune:1,brq->retune_retry_done:0.
[    4.990170] mmcblk0: retrying because a re-tune was needed
[    5.068426] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    5.068437] [mmc0] Data transmission error, need to try retuning 1.
[    5.068470] [mmc0] tuning regsbase addr 0x218.
[    5.069233] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    5.069243] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    5.069251] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    5.069258] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    5.069288] need_retune:1,brq->retune_retry_done:0.
[    5.069375] mmcblk0: retrying because a re-tune was needed
[    5.631078] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    5.631091] [mmc0] Data transmission error, need to try retuning 1.
[    5.631160] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    5.631165] [mmc0] Data transmission error, need to try retuning 1.
[    6.122315] [mmc0] tuning regsbase addr 0x218.
[    6.615017] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    6.615030] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    6.615038] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    6.615049] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    6.615073] mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x400900
[    6.615081] need_retune:1,brq->retune_retry_done:0.
[    6.615086] mmcblk0: retrying because a re-tune was needed
[    6.615356] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    6.615365] [mmc0] Data transmission error, need to try retuning 1.
[    6.615393] [mmc0] tuning regsbase addr 0x218.
[    6.616160] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    6.616170] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    6.616192] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    6.616200] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    6.616220] need_retune:1,brq->retune_retry_done:1.
[    6.616236] mmcblk0: error -84 transferring data, sector 4032600, nr 256, cmd response 0x900, card status 0xb00
[    6.616281] mmcblk0: retrying using single block read
[    6.620975] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008080]
[    6.620984] [mmc0] Data transmission error, need to try retuning 1.
[    6.621006] [mmc0] tuning regsbase addr 0x218.
[    6.621044] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-110, data.error:-115
[    6.621740] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    6.621749] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 12-270 (24 len)
[    6.621757] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 12-270 (24 len)
[    6.621764] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 147
[    6.621784] need_retune:1,brq->retune_retry_done:1.
[    6.621791] mmcblk0: error -84 transferring data, sector 4032647, nr 209, cmd response 0x900, card status 0x0
[    6.621802] end_request: I/O error, dev mmcblk0, sector 4032647
[    6.698381] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008088]
[    6.698393] [mmc0] Data transmission error, need to try retuning 1.
[    6.698427] [mmc0] tuning regsbase addr 0x218.
[    6.699179] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    6.699189] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    6.699197] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    6.699205] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    6.699228] need_retune:1,brq->retune_retry_done:0.
[    6.699234] mmcblk0: retrying because a re-tune was needed
[    6.780459] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008088]
[    6.780469] [mmc0] Data transmission error, need to try retuning 1.
[    6.780505] [mmc0] tuning regsbase addr 0x218.
[    6.781245] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    6.781256] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    6.781264] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    6.781271] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    6.781292] need_retune:1,brq->retune_retry_done:0.
[    6.781298] mmcblk0: retrying because a re-tune was needed
[    6.862541] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008088]
[    6.862552] [mmc0] Data transmission error, need to try retuning 1.
[    6.862579] [mmc0] tuning regsbase addr 0x218.
[    6.863297] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    6.863307] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    6.863316] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    6.863323] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    6.863341] need_retune:1,brq->retune_retry_done:0.
[    6.863347] mmcblk0: retrying because a re-tune was needed
[    6.944876] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    6.944887] [mmc0] Data transmission error, need to try retuning 1.
[    6.944917] [mmc0] tuning regsbase addr 0x218.
[    6.945645] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    6.945655] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    6.945663] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    6.945670] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    6.945689] need_retune:1,brq->retune_retry_done:0.
[    6.945694] mmcblk0: retrying because a re-tune was needed
[    7.026688] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    7.026701] [mmc0] Data transmission error, need to try retuning 1.
[    7.026819] [mmc0] tuning regsbase addr 0x218.
[    7.027712] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    7.027723] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    7.027731] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    7.027738] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    7.027756] need_retune:1,brq->retune_retry_done:0.
[    7.027762] mmcblk0: retrying because a re-tune was needed
[    7.132687] warning: `system_server' uses 32-bit capabilities (legacy support in use)
[    7.190860] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    7.190872] [mmc0] Data transmission error, need to try retuning 1.
[    7.191059] [mmc0] tuning regsbase addr 0x218.
[    7.191866] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    7.191876] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    7.191884] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    7.191892] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    7.191911] need_retune:1,brq->retune_retry_done:0.
[    7.191917] mmcblk0: retrying because a re-tune was needed
[    7.272999] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008088]
[    7.273008] [mmc0] Data transmission error, need to try retuning 1.
[    7.273037] [mmc0] tuning regsbase addr 0x218.
[    7.273794] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    7.273805] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    7.273813] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    7.273821] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    7.273843] need_retune:1,brq->retune_retry_done:0.
[    7.273849] mmcblk0: retrying because a re-tune was needed
[    7.354984] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    7.354994] [mmc0] Data transmission error, need to try retuning 1.
[    7.355002] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008088]
[    7.355008] [mmc0] Data transmission error, need to try retuning 1.
[    7.355036] [mmc0] tuning regsbase addr 0x218.
[    7.355767] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    7.355777] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    7.355785] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    7.355792] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    7.355823] need_retune:1,brq->retune_retry_done:0.
[    7.355829] mmcblk0: retrying because a re-tune was needed
[    7.437053] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    7.437063] [mmc0] Data transmission error, need to try retuning 1.
[    7.437088] [mmc0] tuning regsbase addr 0x218.
[    7.437808] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    7.437818] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    7.437826] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    7.437833] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    7.437852] need_retune:1,brq->retune_retry_done:0.
[    7.437858] mmcblk0: retrying because a re-tune was needed
[    7.519194] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    7.519204] [mmc0] Data transmission error, need to try retuning 1.
[    7.519212] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008088]
[    7.519218] [mmc0] Data transmission error, need to try retuning 1.
[    7.519248] [mmc0] tuning regsbase addr 0x218.
[    7.519997] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    7.520007] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    7.520015] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    7.520023] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    7.520044] need_retune:1,brq->retune_retry_done:0.
[    7.520050] mmcblk0: retrying because a re-tune was needed
[    7.683302] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    7.683317] [mmc0] Data transmission error, need to try retuning 1.
[    7.683347] [mmc0] tuning regsbase addr 0x218.
[    7.684093] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    7.684104] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    7.684112] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    7.684119] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    7.684142] need_retune:1,brq->retune_retry_done:0.
[    7.684148] mmcblk0: retrying because a re-tune was needed
[    8.011640] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.011655] [mmc0] Data transmission error, need to try retuning 1.
[    8.011683] [mmc0] tuning regsbase addr 0x218.
[    8.012411] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.012421] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.012429] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.012437] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.012455] need_retune:1,brq->retune_retry_done:0.
[    8.012461] mmcblk0: retrying because a re-tune was needed
[    8.093741] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.093756] [mmc0] Data transmission error, need to try retuning 1.
[    8.093787] [mmc0] tuning regsbase addr 0x218.
[    8.094511] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.094521] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.094529] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.094537] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.094555] need_retune:1,brq->retune_retry_done:0.
[    8.094561] mmcblk0: retrying because a re-tune was needed
[    8.175788] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.175803] [mmc0] Data transmission error, need to try retuning 1.
[    8.175836] [mmc0] tuning regsbase addr 0x218.
[    8.176566] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.176576] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.176584] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.176591] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.176616] need_retune:1,brq->retune_retry_done:0.
[    8.176622] mmcblk0: retrying because a re-tune was needed
[    8.257871] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.257890] [mmc0] Data transmission error, need to try retuning 1.
[    8.258053] [mmc0] tuning regsbase addr 0x218.
[    8.258776] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.258787] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.258795] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.258802] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.258824] need_retune:1,brq->retune_retry_done:0.
[    8.258829] mmcblk0: retrying because a re-tune was needed
[    8.339989] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.340005] [mmc0] Data transmission error, need to try retuning 1.
[    8.340041] [mmc0] tuning regsbase addr 0x218.
[    8.340744] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.340754] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.340762] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.340769] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.340786] need_retune:1,brq->retune_retry_done:0.
[    8.340792] mmcblk0: retrying because a re-tune was needed
[    8.422066] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.422083] [mmc0] Data transmission error, need to try retuning 1.
[    8.422112] [mmc0] tuning regsbase addr 0x218.
[    8.423170] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.423182] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.423190] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.423198] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.423216] need_retune:1,brq->retune_retry_done:0.
[    8.423222] mmcblk0: retrying because a re-tune was needed
[    8.481186] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    8.481205] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    8.481213] D1:camsys_open(739): camsys_marvin(ddf30b10) is opened!
[    8.481296] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
[    8.481308] D1:camsys_extdev_register(243): Get RK30_PIN3_PB0(104) gpio(active: 0) for dev_id 0x2000000 success!
[    8.481320] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
[    8.481336] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    8.481356] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[    8.486395] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[    8.486405] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[    8.486509] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[    8.486535] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[    8.487597] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[    8.488659] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(104) set 1
[    8.489715] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 1
[    8.504094] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.504105] [mmc0] Data transmission error, need to try retuning 1.
[    8.504136] [mmc0] tuning regsbase addr 0x218.
[    8.504871] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.504881] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.504889] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.504896] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.504914] need_retune:1,brq->retune_retry_done:0.
[    8.504919] mmcblk0: retrying because a re-tune was needed
[    8.586215] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.586225] [mmc0] Data transmission error, need to try retuning 1.
[    8.586233] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008088]
[    8.586239] [mmc0] Data transmission error, need to try retuning 1.
[    8.586267] [mmc0] tuning regsbase addr 0x218.
[    8.586971] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.586981] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.586989] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.586996] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.587017] need_retune:1,brq->retune_retry_done:0.
[    8.587023] mmcblk0: retrying because a re-tune was needed
[    8.668270] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.668280] [mmc0] Data transmission error, need to try retuning 1.
[    8.668311] [mmc0] tuning regsbase addr 0x218.
[    8.669020] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000088]
[    8.669027] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
[    8.669047] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.669056] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.669065] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.669072] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.669101] need_retune:1,brq->retune_retry_done:0.
[    8.669107] mmcblk0: retrying because a re-tune was needed
[    8.680576] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[    8.680591] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
[    8.832481] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.832498] [mmc0] Data transmission error, need to try retuning 1.
[    8.832533] [mmc0] tuning regsbase addr 0x218.
[    8.833233] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.833243] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.833251] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.833259] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.833277] need_retune:1,brq->retune_retry_done:0.
[    8.833283] mmcblk0: retrying because a re-tune was needed
[    8.867538] [otg id chg] last id -1 current id 1
[    8.877383] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[    8.877397] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
[    8.877479] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 0
[    8.877493] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(104) set 0
[    8.877504] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[    8.878587] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[    8.878617] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[    8.880668] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[    8.880683] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[    8.880694] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    8.880701] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    8.880709] D1:camsys_release(763): camsys_marvin(ddf30b10) is closed
[    8.881284] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    8.881293] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    8.881301] D1:camsys_open(739): camsys_marvin(ddf30b10) is opened!
[    8.881377] D1:camsys_extdev_register(243): Get RK30_PIN2_PA0(64) gpio(active: 0) for dev_id 0x1000000 success!
[    8.881389] D1:camsys_extdev_register(243): Get RK30_PIN3_PB0(104) gpio(active: 0) for dev_id 0x1000000 success!
[    8.881399] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x1000000 success!
[    8.881415] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    8.881428] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: OV13850) register success
[    8.886467] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[    8.886478] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[    8.886583] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[    8.886607] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[    8.887677] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[    8.888737] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(104) set 1
[    8.889798] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(64) set 1
[    8.996620] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    8.996632] [mmc0] Data transmission error, need to try retuning 1.
[    8.996642] [mmc0] Data transmission error !!!!  MINTSTS: [0x00008088]
[    8.996647] [mmc0] Data transmission error, need to try retuning 1.
[    8.996675] [mmc0] tuning regsbase addr 0x218.
[    8.997382] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    8.997391] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    8.997399] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    8.997406] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    8.997425] need_retune:1,brq->retune_retry_done:0.
[    8.997431] mmcblk0: retrying because a re-tune was needed
[    9.074180] slot->flags = 1
[    9.074194] CPU: 0 PID: 6 Comm: kworker/u8:0 Tainted: P             3.10.0 #28
[    9.074209] Workqueue: kmmcd mmc_rescan
[    9.074227] [<c0013ec4>] (unwind_backtrace+0x0/0xe0) from [<c001176c>] (show_stack+0x10/0x14)
[    9.074239] [<c001176c>] (show_stack+0x10/0x14) from [<c05d69a4>] (dw_mci_set_ios+0x9c/0x214)
[    9.074250] [<c05d69a4>] (dw_mci_set_ios+0x9c/0x214) from [<c05c3978>] (mmc_power_off+0x5c/0x7c)
[    9.074261] [<c05c3978>] (mmc_power_off+0x5c/0x7c) from [<c05c3b68>] (mmc_rescan_try_freq+0xc8/0xd0)
[    9.074272] [<c05c3b68>] (mmc_rescan_try_freq+0xc8/0xd0) from [<c05c43bc>] (mmc_rescan+0x204/0x298)
[    9.074283] [<c05c43bc>] (mmc_rescan+0x204/0x298) from [<c005088c>] (process_one_work+0x29c/0x458)
[    9.074293] [<c005088c>] (process_one_work+0x29c/0x458) from [<c0050bdc>] (worker_thread+0x194/0x2d4)
[    9.074303] [<c0050bdc>] (worker_thread+0x194/0x2d4) from [<c00561bc>] (kthread+0xa0/0xac)
[    9.074315] [<c00561bc>] (kthread+0xa0/0xac) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[    9.074322] dw_mci_set_ios:  wait for unbusy timeout....... STATUS = 0x206 [mmc1]
[    9.078676] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    9.078686] [mmc0] Data transmission error, need to try retuning 1.
[    9.078720] [mmc0] tuning regsbase addr 0x218.
[    9.079680] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    9.079693] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    9.079701] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    9.079708] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    9.079728] need_retune:1,brq->retune_retry_done:0.
[    9.079734] mmcblk0: retrying because a re-tune was needed
[    9.084037] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[    9.084055] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
[    9.160797] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    9.160808] [mmc0] Data transmission error, need to try retuning 1.
[    9.160839] [mmc0] tuning regsbase addr 0x218.
[    9.161552] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    9.161562] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    9.161571] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    9.161578] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    9.161597] need_retune:1,brq->retune_retry_done:0.
[    9.161602] mmcblk0: retrying because a re-tune was needed
[    9.242981] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    9.242993] [mmc0] Data transmission error, need to try retuning 1.
[    9.243032] [mmc0] tuning regsbase addr 0x218.
[    9.243767] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    9.243778] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    9.243787] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    9.243794] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    9.243817] need_retune:1,brq->retune_retry_done:0.
[    9.243823] mmcblk0: retrying because a re-tune was needed
[    9.280906] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[    9.280922] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
[    9.281010] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(64) set 0
[    9.281024] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(104) set 0
[    9.281035] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[    9.282128] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[    9.282159] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[    9.284215] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[    9.284229] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[    9.284239] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    9.284246] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    9.284253] D1:camsys_release(763): camsys_marvin(ddf30b10) is closed
[    9.288158] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    9.288169] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[    9.288177] D1:camsys_open(739): camsys_marvin(ddf30b10) is opened!
[    9.288257] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[    9.288281] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: TC358749XBG) register success
[    9.293326] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.293337] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[    9.293442] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[    9.293469] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[    9.294538] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[    9.295597] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    9.296657] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[    9.300159] E:camsys_i2c_write(78): i2c write dev(addr:0x1f) failed!
[    9.301624] E:camsys_i2c_write(78): i2c write dev(addr:0xf) failed!
[    9.301709] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[    9.301719] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[    9.301726] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[    9.302813] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[    9.302843] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[    9.304894] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[    9.304910] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[    9.304920] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    9.304927] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[    9.304934] D1:camsys_release(763): camsys_marvin(ddf30b10) is closed
[    9.306476] type=1400 audit(8.950:6): avc: denied { execute } for pid=500 comm="mediaserver" name="sh" dev="mmcblk0p10" ino=321 scontext=u:r:mediaserver:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[    9.306644] type=1400 audit(8.950:7): avc: denied { read open } for pid=500 comm="mediaserver" path="/system/bin/sh" dev="mmcblk0p10" ino=321 scontext=u:r:mediaserver:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[    9.306751] type=1400 audit(8.950:8): avc: denied { execute_no_trans } for pid=500 comm="mediaserver" path="/system/bin/sh" dev="mmcblk0p10" ino=321 scontext=u:r:mediaserver:s0 tcontext=u:object_r:shell_exec:s0 tclass=file permissive=1
[    9.308571] type=1400 audit(8.950:9): avc: denied { getattr } for pid=500 comm="sh" path="/system/bin/toolbox" dev="mmcblk0p10" ino=336 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[    9.308670] type=1400 audit(8.950:10): avc: denied { execute } for pid=500 comm="sh" name="toolbox" dev="mmcblk0p10" ino=336 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[    9.308735] type=1400 audit(8.950:11): avc: denied { read open } for pid=500 comm="sh" path="/system/bin/toolbox" dev="mmcblk0p10" ino=336 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[    9.308801] type=1400 audit(8.950:12): avc: denied { execute_no_trans } for pid=500 comm="sh" path="/system/bin/toolbox" dev="mmcblk0p10" ino=336 scontext=u:r:mediaserver:s0 tcontext=u:object_r:toolbox_exec:s0 tclass=file permissive=1
[    9.407155] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    9.407167] [mmc0] Data transmission error, need to try retuning 1.
[    9.407201] [mmc0] tuning regsbase addr 0x218.
[    9.407944] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    9.407955] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    9.407963] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    9.407970] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    9.407992] need_retune:1,brq->retune_retry_done:0.
[    9.407998] mmcblk0: retrying because a re-tune was needed
[    9.489150] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    9.489163] [mmc0] Data transmission error, need to try retuning 1.
[    9.489238] [mmc0] tuning regsbase addr 0x218.
[    9.490023] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    9.490034] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    9.490042] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    9.490049] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    9.490069] need_retune:1,brq->retune_retry_done:0.
[    9.490075] mmcblk0: retrying because a re-tune was needed
[    9.735381] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    9.735393] [mmc0] Data transmission error, need to try retuning 1.
[    9.735426] [mmc0] tuning regsbase addr 0x218.
[    9.743704] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    9.743718] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[    9.743726] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[    9.743733] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[    9.743755] need_retune:1,brq->retune_retry_done:0.
[    9.743761] mmcblk0: retrying because a re-tune was needed
[    9.904688] healthd: battery none chg=
[   10.082665] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[   10.082685] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[   10.082691] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[   10.082696] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[   10.082702] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[   10.082707] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[   10.082712] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[   10.429707] acc_open
[   10.429734] acc_release
[   10.564279] phy_power_on: enable = 1
[   10.603679] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[   10.603710] eth0: device MAC address 02:b6:b6:24:2f:ed
[   10.607494] libphy: stmmac: probed
[   10.607502] eth0: No PHY found
[   11.019765] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[   11.019784] [mmc0] Data transmission error, need to try retuning 1.
[   11.019820] [mmc0] tuning regsbase addr 0x218.
[   11.020536] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[   11.020548] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-270 (25 len)
[   11.020556] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-270 (25 len)
[   11.020564] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 135
[   11.020696] need_retune:1,brq->retune_retry_done:0.
[   11.020703] mmcblk0: retrying because a re-tune was needed
[   11.534634] rk_sdmmc: ERROR mci_send_cmd: wait for unbusy timeout! [mmc1]
[   11.583549] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[   11.734623] pm policy 0 -> 1
[   12.763115] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[   12.763132] [mmc0] Data transmission error, need to try retuning 1.
[   12.763215] [mmc0] tuning regsbase addr 0x218.
[   12.763771] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000088]
[   12.763781] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
[   12.763824] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:0, data.error:-84
[   12.764141] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[   12.764162] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-169 (16 len)
[   12.764170] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 192-270 (8 len)
[   12.764178] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-169 (16 len)
[   12.764185] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 90
[   12.764207] need_retune:1,brq->retune_retry_done:0.
[   12.764214] mmcblk0: retrying because a re-tune was needed
[   13.044454] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.044474] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.044482] D1:camsys_open(739): camsys_marvin(ddf30b10) is opened!
[   13.044555] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
[   13.044568] D1:camsys_extdev_register(243): Get RK30_PIN3_PB0(104) gpio(active: 0) for dev_id 0x2000000 success!
[   13.044579] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
[   13.044596] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.044616] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[   13.049655] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.049663] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.049768] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.049793] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.050854] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[   13.051911] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(104) set 1
[   13.052966] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 1
[   13.246335] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[   13.246354] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
[   13.443135] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[   13.443156] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
[   13.443231] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 0
[   13.443244] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(104) set 0
[   13.443255] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[   13.444332] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.444359] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.446404] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   13.446415] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.446425] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.446432] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.446439] D1:camsys_release(763): camsys_marvin(ddf30b10) is closed
[   13.447021] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.447030] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.447037] D1:camsys_open(739): camsys_marvin(ddf30b10) is opened!
[   13.447106] D1:camsys_extdev_register(243): Get RK30_PIN2_PA0(64) gpio(active: 0) for dev_id 0x1000000 success!
[   13.447119] D1:camsys_extdev_register(243): Get RK30_PIN3_PB0(104) gpio(active: 0) for dev_id 0x1000000 success!
[   13.447130] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x1000000 success!
[   13.447146] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.447160] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: OV13850) register success
[   13.452181] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.452190] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.452295] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.452313] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.453378] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[   13.454461] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(104) set 1
[   13.455539] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(64) set 1
[   13.649775] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[   13.649798] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
[   13.846579] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[   13.846606] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
[   13.846685] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(64) set 0
[   13.846698] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(104) set 0
[   13.846709] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[   13.847781] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.847808] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.849852] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[   13.849864] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.849874] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.849881] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.849888] D1:camsys_release(763): camsys_marvin(ddf30b10) is closed
[   13.850433] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.850443] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.850450] D1:camsys_open(739): camsys_marvin(ddf30b10) is opened!
[   13.850515] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[   13.850536] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: TC358749XBG) register success
[   13.855552] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.855560] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.855665] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.855684] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[   13.856750] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[   13.857801] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.858852] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[   13.862435] E:camsys_i2c_write(78): i2c write dev(addr:0x1f) failed!
[   13.863885] E:camsys_i2c_write(78): i2c write dev(addr:0xf) failed!
[   13.863937] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[   13.863946] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   13.863953] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[   13.865017] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   13.865036] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   13.867074] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[   13.867085] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   13.867094] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.867100] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   13.867107] D1:camsys_release(763): camsys_marvin(ddf30b10) is closed
[   13.871840] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.871851] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   13.871858] D1:camsys_open(739): camsys_marvin(ddf30b10) is opened!
[   13.871927] D1:camsys_extdev_register(243): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
[   13.871940] D1:camsys_extdev_register(243): Get RK30_PIN3_PB0(104) gpio(active: 0) for dev_id 0x2000000 success!
[   13.871951] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
[   13.871966] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   13.871984] D1:camsys_extdev_register(268): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[   13.877003] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   13.877012] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   13.877117] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   13.877140] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   13.878200] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[   13.879261] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(104) set 1
[   13.880315] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(78) set 1
[   14.043349] slot->flags = 1
[   14.043362] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: P             3.10.0 #28
[   14.043377] Workqueue: kmmcd mmc_rescan
[   14.043395] [<c0013ec4>] (unwind_backtrace+0x0/0xe0) from [<c001176c>] (show_stack+0x10/0x14)
[   14.043408] [<c001176c>] (show_stack+0x10/0x14) from [<c05d69a4>] (dw_mci_set_ios+0x9c/0x214)
[   14.043420] [<c05d69a4>] (dw_mci_set_ios+0x9c/0x214) from [<c05c3788>] (mmc_power_up.part.16+0x60/0xa0)
[   14.043432] [<c05c3788>] (mmc_power_up.part.16+0x60/0xa0) from [<c05c3ab4>] (mmc_rescan_try_freq+0x14/0xd0)
[   14.043444] [<c05c3ab4>] (mmc_rescan_try_freq+0x14/0xd0) from [<c05c43bc>] (mmc_rescan+0x204/0x298)
[   14.043455] [<c05c43bc>] (mmc_rescan+0x204/0x298) from [<c005088c>] (process_one_work+0x29c/0x458)
[   14.043465] [<c005088c>] (process_one_work+0x29c/0x458) from [<c0050bdc>] (worker_thread+0x194/0x2d4)
[   14.043475] [<c0050bdc>] (worker_thread+0x194/0x2d4) from [<c00561bc>] (kthread+0xa0/0xac)
[   14.043487] [<c00561bc>] (kthread+0xa0/0xac) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[   14.043495] dw_mci_set_ios:  wait for unbusy timeout....... STATUS = 0x206 [mmc1]
[   14.072902] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[   14.072912] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
[   14.269696] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[   14.269709] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
[   14.269782] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(78) set 0
[   14.269795] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(104) set 0
[   14.269806] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[   14.270888] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   14.270915] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   14.272962] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x2000000) is deregister success
[   14.272974] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   14.272983] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   14.272990] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   14.272997] D1:camsys_release(763): camsys_marvin(ddf30b10) is closed
[   14.273585] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   14.273595] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   14.273603] D1:camsys_open(739): camsys_marvin(ddf30b10) is opened!
[   14.273677] D1:camsys_extdev_register(243): Get RK30_PIN2_PA0(64) gpio(active: 0) for dev_id 0x1000000 success!
[   14.273689] D1:camsys_extdev_register(243): Get RK30_PIN3_PB0(104) gpio(active: 0) for dev_id 0x1000000 success!
[   14.273701] D1:camsys_extdev_register(243): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x1000000 success!
[   14.273717] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[   14.273731] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: OV13850) register success
[   14.278756] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   14.278764] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   14.278869] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   14.278887] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 24000000Hz) turn on
[   14.279949] D1:camsys_sysctl_extdev(360): Sysctl 11 success, gpio(11) set 1
[   14.281006] D1:camsys_sysctl_extdev(364): Sysctl 8 success, gpio(104) set 1
[   14.282060] D1:camsys_sysctl_extdev(364): Sysctl 7 success, gpio(64) set 1
[   14.476338] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[   14.476350] E:camsys_i2c_write(78): i2c write dev(addr:0x20) failed!
[   14.673129] rockchip_i2c ff150000.i2c: i2c is not in idle(state = 3)
[   14.673149] E:camsys_i2c_write(78): i2c write dev(addr:0x6c) failed!
[   14.673221] D1:camsys_sysctl_extdev(360): Sysctl 7 success, gpio(64) set 0
[   14.673234] D1:camsys_sysctl_extdev(360): Sysctl 8 success, gpio(104) set 0
[   14.673246] D1:camsys_sysctl_extdev(364): Sysctl 11 success, gpio(11) set 0
[   14.674325] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   14.674352] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   14.676400] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[   14.676413] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   14.676422] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   14.676429] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   14.676436] D1:camsys_release(763): camsys_marvin(ddf30b10) is closed
[   14.676974] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   14.676983] D1:camsys_mipiphy_clkin_cb(34): camsys_marvin mipi phy clk in turn on
[   14.676991] D1:camsys_open(739): camsys_marvin(ddf30b10) is opened!
[   14.677056] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: default
[   14.677076] D1:camsys_extdev_register(268): Extdev(dev_id: 0x1000000  dev_name: TC358749XBG) register success
[   14.682102] D1:camsys_mrv_clkin_cb(350): camsys_marvin clock(f: 210000000 Hz) in turn on
[   14.682110] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 1
[   14.682214] D1:camsys_rk3288_cfg(267): Isp_SoftRst: 0
[   14.682233] D1:camsys_mrv_clkout_cb(392): camsys_marvin clock out(rate: 27000000Hz) turn on
[   14.683287] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[   14.684340] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   14.685392] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[   14.688868] E:camsys_i2c_write(78): i2c write dev(addr:0x1f) failed!
[   14.690318] E:camsys_i2c_write(78): i2c write dev(addr:0xf) failed!
[   14.690372] E:camsys_sysctl_extdev(367): Sysctl 7 failed, because gpio is NULL!
[   14.690380] E:camsys_sysctl_extdev(367): Sysctl 8 failed, because gpio is NULL!
[   14.690388] E:camsys_sysctl_extdev(367): Sysctl 11 failed, because gpio is NULL!
[   14.691453] D1:camsys_mrv_clkin_cb(374): camsys_marvin clock in turn off
[   14.691472] D1:camsys_mrv_clkout_cb(404): camsys_marvin clock out turn off
[   14.693510] D1:camsys_extdev_deregister(331): Extdev(dev_id: 0x1000000) is deregister success
[   14.693522] D1:camsys_irq_disconnect(664): All thread disconnect camsys_marvin irq success!
[   14.693530] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   14.693537] D1:camsys_mipiphy_clkin_cb(36): camsys_marvin mipi phy clk in turn off
[   14.693545] D1:camsys_release(763): camsys_marvin(ddf30b10) is closed
[   16.172638] type=1400 audit(15.930:13): avc: denied { entrypoint } for pid=1063 comm="init" path="/system/bin/usb_mode_switch.sh" dev="mmcblk0p10" ino=347 scontext=u:r:install_recovery:s0 tcontext=u:object_r:system_file:s0 tclass=file permissive=1
[   16.503360] rk_sdmmc: ERROR mci_send_cmd: wait for unbusy timeout! [mmc1]
[   16.552568] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[   18.774966] type=1400 audit(18.570:14): avc: denied { write } for pid=1129 comm="chip.devicetest" name="force_usb_mode" dev="sysfs" ino=12715 scontext=u:r:system_app:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=1
[   18.775535] force_usb_mode_store 1->1
[   19.032229] slot->flags = 3
[   19.032247] CPU: 2 PID: 6 Comm: kworker/u8:0 Tainted: P             3.10.0 #28
[   19.032262] Workqueue: kmmcd mmc_rescan
[   19.032280] [<c0013ec4>] (unwind_backtrace+0x0/0xe0) from [<c001176c>] (show_stack+0x10/0x14)
[   19.032293] [<c001176c>] (show_stack+0x10/0x14) from [<c05d69a4>] (dw_mci_set_ios+0x9c/0x214)
[   19.032305] [<c05d69a4>] (dw_mci_set_ios+0x9c/0x214) from [<c05c37bc>] (mmc_power_up.part.16+0x94/0xa0)
[   19.032316] [<c05c37bc>] (mmc_power_up.part.16+0x94/0xa0) from [<c05c3ab4>] (mmc_rescan_try_freq+0x14/0xd0)
[   19.032327] [<c05c3ab4>] (mmc_rescan_try_freq+0x14/0xd0) from [<c05c43bc>] (mmc_rescan+0x204/0x298)
[   19.032338] [<c05c43bc>] (mmc_rescan+0x204/0x298) from [<c005088c>] (process_one_work+0x29c/0x458)
[   19.032347] [<c005088c>] (process_one_work+0x29c/0x458) from [<c0050bdc>] (worker_thread+0x194/0x2d4)
[   19.032358] [<c0050bdc>] (worker_thread+0x194/0x2d4) from [<c00561bc>] (kthread+0xa0/0xac)
[   19.032370] [<c00561bc>] (kthread+0xa0/0xac) from [<c000da98>] (ret_from_fork+0x14/0x3c)
[   19.032378] dw_mci_set_ios:  wait for unbusy timeout....... STATUS = 0x206 [mmc1]
[   19.032390] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 300000Hz, actual 297619HZ div = 84)
[   21.492232] rk_sdmmc: ERROR mci_send_cmd: wait for unbusy timeout! [mmc1]
[   21.541436] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[   21.541451] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 600000Hz for init[mmc1]
[   24.001431] rk_sdmmc: ERROR mci_send_cmd: wait for unbusy timeout! [mmc1]
[   24.050632] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[   26.510630] rk_sdmmc: ERROR mci_send_cmd: wait for unbusy timeout! [mmc1]
[   26.559831] mmc_host mmc1: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)

jpchen

这个问题好像你提了有两次哦，你用的核心板，现在又是firefly-rk3288,那到底是什么板子呢？

whhk

jpchen 发表于 2019-12-21 10:10
这个问题好像你提了有两次哦，你用的核心板，现在又是firefly-rk3288,那到底是什么板子呢？

两次是一样的板子，Core-3288J核心板。描述部分写错了。配套使用的是AIO-3288J。
上次的问题把金手指和插座擦干净后，就不出现了。但是不知道怎么的，HDMI口接出来的显示器不稳定，容易闪动和重启。

jpchen

whhk 发表于 2019-12-23 09:38
两次是一样的板子，Core-3288J核心板。描述部分写错了。配套使用的是AIO-3288J。
上次的问题把金手指和 ...

如果你是核心板，是否固件烧录错了，可以把烧录固件的名字列一下。

whhk

jpchen 发表于 2019-12-23 09:51
如果你是核心板，是否固件烧录错了，可以把烧录固件的名字列一下。

固件使用的是AIO-3288J_Android5.1.1_Public_180112.img

jpchen

whhk 发表于 2019-12-23 10:12
固件使用的是AIO-3288J_Android5.1.1_Public_180112.img

你可以试一下如下这版固件
https://pan.baidu.com/s/1Ou_r5AoSULSwleNjDs8sNw

whhk

jpchen 发表于 2019-12-23 10:31
你可以试一下如下这版固件
https://pan.baidu.com/s/1Ou_r5AoSULSwleNjDs8sNw

烧录固件后，不会重启了。鼠标接在USB-OTG口，当有点击操作时，屏幕会黑掉，2秒后切回画面。是不是核心板跟底板插座接触不良？