系统启动时，若拔掉USB下载线则进入深度睡眠，连接下载线可以正常启动内核

qingxia0702

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (firefly@tchip-server) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #12 SMP PREEMPT Wed Apr 22 11:14:57 CST 2015
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] rockchip_ion_reserve
[    0.000000] ion heap(cma): base(40000000) size(28000000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 640 MiB at 40000000
[    0.000000] ion_reserve: cma reserved base 40000000 size 671088640
[    0.000000] cma: CMA: reserved 16 MiB at 2e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1ddc000 s14016 r8192 d14656 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[    0.000000] Kernel command line: console=ttyS2 earlyprintk androidboot.hardware=rk30board androidboot.console=ttyS2 board.ap_has_alsa=0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user) storagemedia=emmc loader.timestamp=2014-11-27_16:44:27
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 1388480k/1388480k available, 708672k reserved, 663552K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0ae28fc   (11115 kB)
[    0.000000]       .init : 0xc0ae3000 - 0xc0b776c0   ( 594 kB)
[    0.000000]       .data : 0xc0b78000 - 0xc0c7f438   (1054 kB)
[    0.000000]        .bss : 0xc0c7f438 - 0xc0d9d7c4   (1145 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[    0.000000] rkclk_init_clks: cnt_parent = 7
[    0.000000] rkclk_init_clks: cnt_rate = 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 3
[    0.000000] channel:0, lkg:33
[    0.000000] target-temp:80
[    0.000000] channel:2, lkg:0
[    0.000000] target-temp:80
[    0.000000] channel:0, lkg:33
[    0.000000] target-temp:80
[    0.000000] channel:1, lkg:32
[    0.000000] target-temp:80
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.304974] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.304989] pid_max: default: 32768 minimum: 301
[    0.305094] Security Framework initialized
[    0.305111] SELinux:  Initializing.
[    0.305182] Mount-cache hash table entries: 512
[    0.305824] Initializing cgroup subsys debug
[    0.305838] Initializing cgroup subsys memory
[    0.305865] Initializing cgroup subsys freezer
[    0.305893] CPU: Testing write buffer coherency: ok
[    0.306204] /cpus/cpu@0 missing clock-frequency property
[    0.306218] /cpus/cpu@1 missing clock-frequency property
[    0.306227] /cpus/cpu@2 missing clock-frequency property
[    0.306236] /cpus/cpu@3 missing clock-frequency property
[    0.306298] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.306349] Setting up static identity map for 0xc07e2690 - 0xc07e26e8
[    0.309434] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x1661 (version 3.0)
[    0.383019] CPU1: Booted secondary processor
[    0.383052] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.402703] CPU2: Booted secondary processor
[    0.402727] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.422413] CPU3: Booted secondary processor
[    0.422437] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.422539] Brought up 4 CPUs
[    0.422567] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.422576] CPU: All CPU(s) started in SVC mode.
[    0.423300] devtmpfs: initialized
[    0.428270] pinctrl core: initialized pinctrl subsystem
[    0.428519] regulator-dummy: no parameters
[    0.439925] NET: Registered protocol family 16
[    0.441704] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.442028] ion_snapshot: 0x2e1e0000 map to 0xf0107000 and copy to 0xc0d78dc4 (version 0.1)
[    0.442332] Registered FIQ tty driver
[    0.442749] fiq-debugger is disabled in device tree
[    0.443326] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[    0.443347] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[    0.443364] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[    0.443380] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[    0.443467] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[    0.443530] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[    0.443591] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[    0.443651] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[    0.443719] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[    0.443780] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[    0.443839] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[    0.443898] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[    0.443966] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[    0.444027] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[    0.444040] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[    0.444052] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[    0.444063] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[    0.444569] rockchip_interrupts_register:bank_num=7
[    0.446470] rockchip_pinctrl_probe:init ok
[    0.452572] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.452664] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.452677] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.452836] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.452904] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.452916] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.453075] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.453143] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453155] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.453314] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[    0.453380] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453392] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.453553] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.453626] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453638] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.453801] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.453873] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453885] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.454047] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.454115] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.454128] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[    0.456038] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.456051] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.456250] DDR DEBUG: version 1.00 20140603
[    0.456280] DDR DEBUG: Channel a:
[    0.456288] DDR DEBUG: DDR3 Device
[    0.456301] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.456309] DDR DEBUG: Channel b:
[    0.456316] DDR DEBUG: DDR3 Device
[    0.456329] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.456338] DDR DEBUG: addr=0xc87000
[    0.456346] DDR DEBUG: stride=9, size=256, halfcap=40000000
[    0.456355] DDR DEBUG: socAddr[0]=0xc87000, socAddr[1]=0xc87100
[    0.456364] DDR DEBUG: chAddr[0]=0xc87000, chAddr[1]=0xc87000
[    0.456375] DDR DEBUG: dtar[0]=0x70190000, dtar[1]=0x70190000
[    0.456617] DDR DEBUG: init success!!! freq=300MHz
[    0.456625] DDR DEBUG: Channel a:
[    0.456637] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=3,0, DGSL=1,1 extra clock, DGPS=360,360
[    0.456650] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456662] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=3,0, DGSL=1,1 extra clock, DGPS=360,360
[    0.456674] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456685] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.456695] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.456703] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.456710] DDR DEBUG: Channel b:
[    0.456721] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456733] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456745] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456757] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456768] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.456777] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.456785] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.479097] bio: create slab <bio-0> at 0
[    0.479902] SCSI subsystem initialized
[    0.480048] usbcore: registered new interface driver usbfs
[    0.480090] usbcore: registered new interface driver hub
[    0.480171] usbcore: registered new device driver usb
[    0.481565] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.483670] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.485267] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.486196] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[    0.486435] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.486920] media: Linux media interface: v0.10
[    0.486960] Linux video capture interface: v2.00
[    0.487005] pps_core: LinuxPPS API ver. 1 registered
[    0.487015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.487034] PTP clock support registered
[    0.487490] Rockchip ion module is successfully loaded (v1.0)
[    0.487648] Advanced Linux Sound Architecture Driver Initialized.
[    0.488007] Bluetooth: Core ver 2.16
[    0.488042] NET: Registered protocol family 31
[    0.488051] Bluetooth: HCI device and connection manager initialized
[    0.488065] Bluetooth: HCI socket layer initialized
[    0.488081] Bluetooth: L2CAP socket layer initialized
[    0.488123] Bluetooth: SCO socket layer initialized
[    0.488348] cfg80211: Calling CRDA to update world regulatory domain
[    0.489562] act8846_i2c_probe,line=898
[    0.490519] act8846_parse_dt,line=746
[    0.491272] act8846_i2c_probe: act8846_pmic_hold=1
[    0.491291] act8846_i2c_probe: act8846_pmic_sleep=1
[    0.491305] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
[    0.491320] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
[    0.493134] act_dcdc1: 1200 mV
[    0.495848] vccio: 3300 mV
[    0.497691] vdd_logic: 700 <--> 1500 mV at 1100 mV
[    0.500391] act_dcdc4: 2000 mV
[    0.501630] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[    0.503703] act_ldo2: 1000 mV
[    0.505781] act_ldo3: 2800 mV
[    0.507830] act_ldo4: 3300 mV
[    0.509892] act_ldo5: 3300 mV
[    0.511969] act_ldo6: 1000 mV
[    0.514035] vcc_18: 1800 mV
[    0.516086] act_ldo8: 1800 mV
[    0.520834] vdd_arm: 712 <--> 1500 mV at 1000 mV
[    0.525527] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[    0.526295] Switching to clocksource arch_sys_counter
[    0.546580] rk-fb rockchip-fb: rk fb ion client create success!
[    0.546593] rk-fb rockchip-fb: rockchip framebuffer driver probe
[    0.546985] rk-screen rk_screen.8: rockchip screen probe success
[    0.547145] rk32-lvds ff96c000.lvds: screen is not lvds/rgb!
[    0.547163] rk32-lvds: probe of ff96c000.lvds failed with error -22
[    0.547493] rk32-edp ff970000.edp: screen is not edp!
[    0.547508] rk32-edp: probe of ff970000.edp failed with error -22
[    0.547658] rk32-dsi
[    0.547801] dsi->host.irq =51
[    0.547819] load mipi dsi chip:rk_mipi_dsi.0 id:3133302a
[    0.547827] mipi_dsi v1.3 2014-04-17
[    0.547853] rk32-mipi ff960000.mipi: rk mipi_dsi probe success!
[    0.547865] rk32-mipi ff960000.mipi: rockchip mipi_dsi v1.1 2014-06-17
[    0.548371] rk3288-lcdc lcdc0: request lcd_rst gpio fail:-16
[    0.548612] graphics fb0: rockchip framebuffer registerd:fb0
[    0.548918] graphics fb1: rockchip framebuffer registerd:fb1
[    0.549070] graphics fb2: rockchip framebuffer registerd:fb2
[    0.549220] graphics fb3: rockchip framebuffer registerd:fb3
[    0.560283] rk3288-lcdc lcdc0: lcdc0: dclk:120000000>>fps:50
[    0.560296] dsi->phy.sys_clk =24000000
[    1.057723] rk3288-lcdc lcdc0: wakeup from standby!
[    1.082798] alloc_buffer:ion_phy_addr=0x40000000
[    1.095543] fb0:phy:40000000>>vir:f0171000>>len:0x1900000
[    1.099075] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
[    1.099235] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[    1.099247] rk_fb_trsm_ops_get:un supported transmitter:0!
[    1.099468] graphics fb4: rockchip framebuffer registerd:fb4
[    1.099767] graphics fb5: rockchip framebuffer registerd:fb5
[    1.099922] graphics fb6: rockchip framebuffer registerd:fb6
[    1.100080] graphics fb7: rockchip framebuffer registerd:fb7
[    1.147292] alloc_buffer:ion_phy_addr=0x41900000
[    1.147308] fb0:phy:41900000>>vir:  (null)>>len:0x3000000
[    1.147325] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
[    1.147984] rockchip_set_mux:warning ignore bank num 15
[    1.148105] rockchip_set_mux:warning ignore bank num 15
[    1.148207] rockchip_set_mux:warning ignore bank num 15
[    1.148316] rockchip_set_mux:warning ignore bank num 15
[    1.148417] rockchip_set_mux:warning ignore bank num 15
[    1.148526] rockchip_set_mux:warning ignore bank num 15
[    1.149099] rockchip_set_mux:warning ignore bank num 15
[    1.149244] rockchip_set_mux:warning ignore bank num 15
[    1.149778] rockchip_set_mux:warning ignore bank num 15
[    1.149912] rockchip_set_mux:warning ignore bank num 15
[    1.150440] rockchip_set_mux:warning ignore bank num 15
[    1.150579] rockchip_set_mux:warning ignore bank num 15
[    1.151127] rockchip_set_mux:warning ignore bank num 15
[    1.151267] rockchip_set_mux:warning ignore bank num 15
[    1.152626] NET: Registered protocol family 2
[    1.153066] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.153197] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.153330] TCP: Hash tables configured (established 8192 bind 8192)
[    1.153380] TCP: reno registered
[    1.153394] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.153428] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.153620] NET: Registered protocol family 1
[    1.153830] Unpacking initramfs...
[    1.216094] Freeing initrd memory: 1160K (c4bf0000 - c4d12000)
[    1.216674] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    1.217151] probe device ff9a0000.vpu_service
[    1.217341] vpu_service: power on
[    1.218397] checking hw id 4831
[    1.218754] vpu_service set to auto frequency mode
[    1.218788] vpu_service: power off...
[    1.218823] done
[    1.218831] init success
[    1.218880] probe device ff9c0000.hevc_service
[    1.219071] hevc_service: power on
[    1.220106] checking hw id 6867
[    1.220327] hevc_service: power off...
[    1.220363] done
[    1.220371] init success
[    1.220482] rknandbase v1.0 2014-03-31
[    1.220575] rknand ff400000.nandc0: no irq resource?
[    1.220700] rknand_driver:ret = 0
[    1.222291] audit: initializing netlink socket (disabled)
[    1.222329] type=2000 audit(0.920:1): initialized
[    1.223077] bounce pool size: 64 pages
[    1.227526] fuse init (API version 7.22)
[    1.227873] msgmni has been set to 1450
[    1.229580] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.229595] io scheduler noop registered
[    1.229603] io scheduler deadline registered
[    1.229686] io scheduler cfq registered (default)
[    1.233209] rga2 ff920000.rga: rga ion client create success!
[    1.233356] rga: Driver loaded succesfully
[    1.233969] IEP Driver loaded succesfully
[    1.234065] Module initialized.
[    1.234955] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.234971] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    1.236264] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.236280] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.236553] pwm-voltage-regulator pwm_regulator.28: unable to request PWM, trying legacy API
[    1.236567] pwm-voltage-regulator pwm_regulator.28: unable to request legacy PWM
[    1.236576] pwm_regulator_probe:error
[    1.236595] platform pwm_regulator.28: Driver pwm-voltage-regulator requests probe deferral
[    1.236932] rk_serial.c v1.8 2014-03-04
[    1.237133] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    1.237322] serial ff180000.serial: membase f1a74000
[    1.237448] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2
[    2.915394] console [ttyS2] enabled
[    2.919017] serial ff690000.serial: membase fed60000
[    2.926539] loop: module loaded
[    2.930193] SCSI Media Changer driver v0.25
[    2.934707] tun: Universal TUN/TAP device driver, 1.6
[    2.939708] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.945895] vmac_init.
[    2.948729] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    2.955404] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[    2.962361] stmmac_probe_config_dt: clock input or output? (input).
[    2.968533] stmmac_probe_config_dt: TX delay(0x30).
[    2.973329] stmmac_probe_config_dt: RX delay(0x20).
[    2.978180] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    2.983487] stmmc_pltfr_init:
[    2.986691] stmmc_pltfr_init: init for RGMII
[    2.990891] tx delay=0x30
[    2.990891] rx delay=0x20
[    2.996476] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    3.001457]  Normal descriptors
[    3.004547]  Ring mode enabled
[    3.007564]  DMA HW capability register supported
[    3.012019]  RX Checksum Offload Engine supported (type 2)
[    3.017609]  TX Checksum insertion supported
[    3.021807]  Wake-Up On Lan supported
[    3.025433]  Enable RX Mitigation via HW Watchdog Timer
[    3.030988] PPP generic driver version 2.4.2
[    3.035324] PPP BSD Compression module registered
[    3.039979] PPP Deflate Compression module registered
[    3.044955] PPP MPPE Compression module registered
[    3.049677] NET: Registered protocol family 24
[    3.054069] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    3.063577] CSLIP: code copyright 1989 Regents of the University of California.
[    3.070771] Rockchip WiFi SYS interface (V1.00) ...
[    3.075683] esp_mem_init enter date Dec 26 2014 09:48:50
[    3.080949] esp_mem_init complete
[    3.084352] usbcore: registered new interface driver catc
[    3.089704] usbcore: registered new interface driver kaweth
[    3.095195] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    3.102505] usbcore: registered new interface driver pegasus
[    3.108116] usbcore: registered new interface driver rtl8150
[    3.113721] usbcore: registered new interface driver r8152
[    3.119138] hso: drivers/net/usb/hso.c: Option Wireless
[    3.124342] usbcore: registered new interface driver hso
[    3.129598] usbcore: registered new interface driver asix
[    3.134948] usbcore: registered new interface driver ax88179_178a
[    3.140979] usbcore: registered new interface driver cdc_ether
[    3.146753] usbcore: registered new interface driver cdc_eem
[    3.152348] usbcore: registered new interface driver dm9601
[    3.157877] usbcore: registered new interface driver dm9620
[    3.163392] usbcore: registered new interface driver smsc75xx
[    3.169092] usbcore: registered new interface driver smsc95xx
[    3.174782] usbcore: registered new interface driver gl620a
[    3.180300] usbcore: registered new interface driver net1080
[    3.185908] usbcore: registered new interface driver plusb
[    3.191329] usbcore: registered new interface driver rndis_host
[    3.197201] usbcore: registered new interface driver cdc_subset
[    3.203060] usbcore: registered new interface driver zaurus
[    3.208567] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    3.215903] usbcore: registered new interface driver int51x1
[    3.221496] usbcore: registered new interface driver kalmia
[    3.227015] usbcore: registered new interface driver ipheth
[    3.232541] usbcore: registered new interface driver sierra_net
[    3.238403] usbcore: registered new interface driver cx82310_eth
[    3.244358] usbcore: registered new interface driver cdc_ncm
[    3.249951] usbcore: registered new interface driver qmi_wwan
[    3.255652] usbcore: registered new interface driver cdc_mbim
[    3.261301] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.270092] ehci_rk_probe f1b00000 f1b00010
[    3.274228] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
[    3.281709] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    3.290125] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    3.311092] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[    3.317674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.324404] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.331519] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[    3.337767] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    3.343084] usb usb1: SerialNumber: ff500000.usb
[    3.348027] hub 1-0:1.0: USB hub found
[    3.351743] hub 1-0:1.0: 1 port detected
[    3.379960] ehci_rk_probe ok
[    3.382934] usbcore: registered new interface driver cdc_acm
[    3.388498] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.396426] usbcore: registered new interface driver usblp
[    3.401865] usbcore: registered new interface driver cdc_wdm
[    3.407475] usbcore: registered new interface driver usb-storage
[    3.413420] usbcore: registered new interface driver ums-alauda
[    3.419265] usbcore: registered new interface driver ums-cypress
[    3.425207] usbcore: registered new interface driver ums-datafab
[    3.431148] usbcore: registered new interface driver ums_eneub6250
[    3.437249] usbcore: registered new interface driver ums-freecom
[    3.443196] usbcore: registered new interface driver ums-isd200
[    3.449098] usbcore: registered new interface driver ums-jumpshot
[    3.455115] usbcore: registered new interface driver ums-karma
[    3.460891] usbcore: registered new interface driver ums-onetouch
[    3.466906] usbcore: registered new interface driver ums-sddr09
[    3.472764] usbcore: registered new interface driver ums-sddr55
[    3.478621] usbcore: registered new interface driver ums-usbat
[    3.484429] usbcore: registered new interface driver usbserial
[    3.490210] usbcore: registered new interface driver usbserial_generic
[    3.496646] usbserial: USB Serial support registered for generic
[    3.502591] usbcore: registered new interface driver option
[    3.508099] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.514998] usbcore: registered new interface driver trancevibrator
[    3.521171] usb20_otg: version 3.10a 21-DEC-2012
[    3.526096] f1b80040
[    3.528266] Core Release: 3.10a
[    3.531356] Setting default values for core params
[    3.536170] Using Buffer DMA mode
[    3.539445] Periodic Transfer Interrupt Enhancement - disabled
[    3.545170] Multiprocessor Interrupt Enhancement - disabled
[    3.550657] OTG VER PARAM: 0, OTG VER FLAG: 0
[    3.554941] ^^^^^^^^^^^^^^^^^Device Mode
[    3.558808] Dedicated Tx FIFOs mode
[    3.562246] pcd_init otg_dev = ed646980
[    3.566146] usb20_otg ff580000.usb: DWC OTG Controller
[    3.571229] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    3.578619] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    3.584310] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.590999] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.598110] usb usb2: Product: DWC OTG Controller
[    3.602736] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    3.608309] usb usb2: SerialNumber: ff580000.usb
[    3.613206] hub 2-0:1.0: USB hub found
[    3.616921] hub 2-0:1.0: 1 port detected
[    3.621074] usb20_host: version 3.10a 21-DEC-2012
[    3.628176] f1c00040
[    3.630331] Core Release: 3.10a
[    3.633420] Setting default values for core params
[    3.638224] Using Buffer DMA mode
[    3.641486] Periodic Transfer Interrupt Enhancement - disabled
[    3.647230] Multiprocessor Interrupt Enhancement - disabled
[    3.652709] OTG VER PARAM: 0, OTG VER FLAG: 0
[    3.657001] ^^^^^^^^^^^^^^^^^^Host Mode
[    3.660792] usb20_host ff540000.usb: DWC OTG Controller
[    3.665958] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    3.673417] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    3.679241] Init: Power Port (0)
[    3.682458] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.689146] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.696255] usb usb3: Product: DWC OTG Controller
[    3.700882] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    3.706455] usb usb3: SerialNumber: ff540000.usb
[    3.711337] hub 3-0:1.0: USB hub found
[    3.715087] hub 3-0:1.0: 1 port detected
[    3.719496] .. rk pwm remotectl v1.0 init
[    3.723510] remotectl probe j=0x0
[    3.726923] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[    3.733419] pwm enable val=0x646205
[    3.737206] usbcore: registered new interface driver xpad
[    3.742555] usbcore: registered new interface driver usb_acecad
[    3.748426] usbcore: registered new interface driver aiptek
[    3.753950] usbcore: registered new interface driver gtco
[    3.759295] usbcore: registered new interface driver hanwang
[    3.764905] usbcore: registered new interface driver kbtab
[    3.770337] usbcore: registered new interface driver wacom
[    3.796706] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 1
[    3.833532] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 2
[    3.863053] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 3
[    3.892570] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 4
[    3.922090] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 5
[    3.951610] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 6
[    3.981132] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 7
[    4.010648] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 8
[    4.040172] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 9
[    4.069692] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 10
[    4.098284] synaptics_dsx_i2c 1-0020: synaptics_rmi4_set_input_dev: Failed to query device
[    4.106415] synaptics_dsx synaptics_dsx.0: synaptics_rmi4_probe: Failed to set up input device
[    4.114911] synaptics_dsx: probe of synaptics_dsx.0 failed with error -5
[    4.124004] rtc_hym8563 0-0051: clock/calendar information is no longer guaranteed
[    4.134354] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    4.140664] i2c /dev entries driver
[    4.144771] IR NEC protocol handler initialized
[    4.149257] IR RC5(x) protocol handler initialized
[    4.153968] IR RC6 protocol handler initialized
[    4.158430] IR JVC protocol handler initialized
[    4.162884] IR Sony protocol handler initialized
[    4.167440] IR RC5 (streamzap) protocol handler initialized
[    4.172918] IR SANYO protocol handler initialized
[    4.177551] IR MCE Keyboard/mouse protocol handler initialized
[    4.183417] usbcore: registered new interface driver uvcvideo
[    4.189090] USB Video Class driver (1.1.1)
[    4.193121] CamSys driver version: v0.23.0,  CamSys head file version: v0.9.0
[    4.201485] D1:camsys_platform_probe(1067): 1-gpios-cifpower锛gpio=236
[    4.208114] D1:camsys_platform_probe(1070): gpios-cifpower锛gpio_request
[    4.214876] D1:camsys_platform_probe(1072): 1-gpios-cifpower锛gpio_request=0
[    4.221992] D1:camsys_platform_probe(1079): gpios-cifpower锛236 high
[    4.228494] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[    4.239320] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xf1ab0000  size: 0x4000)
[    4.252076] D1:camsys_platform_probe(1183): ff910000.isp memory:
[    4.258002] D1:camsys_platform_probe(1193):     Register memory (phy: 0xff910000 vir: 0xf1ae0000 size: 0x10000)
[    4.267940] D1:camsys_platform_probe(1188):     I2c memory (phy: 0x2d68f000 vir: 0xed68f000 size: 0x1000)
[    4.277352] D1:camsys_platform_probe(1208): Probe ff910000.isp device success
[    4.285721] rockchip_temp_probe,line=362
[    4.344304] tsadc ff280000.tsadc: initialized
[    4.348979] device-mapper: uevent: version 1.0.3
[    4.353738] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    4.362339] Bluetooth: HCI UART driver ver 2.2
[    4.366743] Bluetooth: HCI H4 protocol initialized
[    4.371454] Bluetooth: HCILL protocol initialized
[    4.379188] cpufreq version 1.0, suspend freq 1200 MHz
[    4.384433] cpuidle: using governor ladder
[    4.388478] cpuidle: using governor menu
[    4.392360] Synopsys Designware Multimedia Card Interface Driver
[    4.398524] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    4.404698] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[    4.411705] 3379..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[    4.418152] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    4.424024] 1390..dw_mci_set_ios:  no card. [mmc0]
[    4.442709] 1390..dw_mci_set_ios:  no card. [mmc0]
[    4.462424] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    4.462438] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    4.462450] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    4.462737] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    4.492954] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    4.499941] 3379..dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc1]
[    4.506286] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    4.512106] mmc1: no vmmc regulator found
[    4.516160] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[    4.522949] 1390..dw_mci_set_ios:  no card. [mmc1]
[    4.533890] mmc0: BKOPS_EN bit is not set
[    4.539116] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[    4.541090] 1390..dw_mci_set_ios:  no card. [mmc1]
[    4.553529] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    4.560809] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    4.560818] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[    4.561156] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    4.583648] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    4.583658] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
[    4.583767] mmc0: new high speed MMC card at address 0001
[    4.584110] mmcblk0: mmc0:0001 MAG2GA 14.5 GiB
[    4.584480]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    4.584490]       misc: 0x000800000 -- 0x000c00000 (4 MB)
[    4.584497]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    4.584505]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[    4.584512]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
[    4.584519]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[    4.584525]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
[    4.584532]      cache: 0x00a000000 -- 0x012000000 (128 MB)
[    4.584539]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
[    4.584546]     system: 0x012400000 -- 0x042400000 (768 MB)
[    4.584553]   metadata: 0x042400000 -- 0x042800000 (4 MB)
[    4.584560]   userdata: 0x042800000 -- 0x082800000 (1024 MB)
[    4.584567] radical_update: 0x082800000 -- 0x086800000 (64 MB)
[    4.584575]       user: 0x086800000 -- 0x3a3a00000 (12754 MB)
[    4.585948]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p141390..dw_mci_set_ios:  no card. [mmc1]
[    4.692865] 3379..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    4.699222] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    4.705353] 1390..dw_mci_set_ios:  no card. [mmc2]
[    4.728058] 1390..dw_mci_set_ios:  no card. [mmc2]
[    4.747765] 1390..dw_mci_set_ios:  no card. [mmc2]
[    4.747830] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    4.747856] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    4.748786] leds-gpio leds.37: pins are not configured from the driver
[    4.749677] hidraw: raw HID events driver (C) Jiri Kosina
[    4.756705] usbcore: registered new interface driver usbhid
[    4.756727] usbhid: USB HID core driver
[    4.758038] zram: Created 1 device(s) ...
[    4.759259] ashmem: initialized
[    4.759754] logger: created 256K log 'log_main'
[    4.760232] logger: created 256K log 'log_events'
[    4.760694] logger: created 256K log 'log_radio'
[    4.761136] logger: created 256K log 'log_system'
[    4.765342] input: rk29-keypad as /devices/ff100000.adc/key.39/input/input1
[    4.821825] es8323 probe i2c recv ok
[    4.825517] i2c-core: driver [ES8323] using legacy suspend method
[    4.831532] i2c-core: driver [ES8323] using legacy resume method
[    4.838948] rockchip-hdmi-spdif rockchip-hdmi-spdif.32: ASoC: CPU DAI (null) not registered
[    4.847276] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    4.853794] platform rockchip-hdmi-spdif.32: Driver rockchip-hdmi-spdif requests probe deferral
[    4.862754] es8323_probe
[    5.506717] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
[    5.514514] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
[    5.522474] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
[    5.530407] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
[    5.538188] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
[    5.546343] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
[    5.554482] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
[    5.562300] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
[    5.570125] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
[    5.577943] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
[    5.585773] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
[    5.594090] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
[    5.602416] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
[    5.610067] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
[    5.617721] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
[    5.625366] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
[    5.633001] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
[    5.641416] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
[    5.649844] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
[    5.657565] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
[    5.665292] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
[    5.673000] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
[    5.680711] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
[    5.689198] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
[    5.697688] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
[    5.705669] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
[    5.713647] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
[    5.721606] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
[    5.729585] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
[    5.737561] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
[    5.745544] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
[    5.753520] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
[    5.761535] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
[    5.769236] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
[    5.776966] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
[    5.784675] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
[    5.792379] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
[    5.800504] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
[    5.808638] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
[    5.816430] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
[    5.824223] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
[    5.832010] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
[    5.839796] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
[    5.848099] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
[    5.856541] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
[    5.862471] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
[    5.868296] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
[    5.874150] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
[    5.879924] ES8323 2-0010: ASoC: mux Differential Mux has no paths
[    5.889494] rockchip-es8323 rockchip-es8323.34:  ES8323 HiFi <-> rockchip-i2s.0 mapping ok
[    5.898013] input: RK_ES8323 Headphone Jack as /devices/rockchip-es8323.34/sound/card0/input2
[    5.907211] rockchip-hdmi-i2s rockchip-hdmi-i2s.31:  rk-hdmi-i2s-hifi <-> rockchip-i2s.0 mapping ok
[    5.916530] u32 classifier
[    5.919205]     Actions configured
[    5.922553] Netfilter messages via NETLINK v0.30.
[    5.927215] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    5.933707] ctnetlink v0.93: registering with nfnetlink.
[    5.939017] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    5.945863] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    5.952008] xt_time: kernel timezone is -0000
[    5.956509] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.961877] arp_tables: (C) 2002 David S. Miller
[    5.966445] TCP: cubic registered
[    5.969724] Initializing XFRM netlink socket
[    5.974174] NET: Registered protocol family 10
[    5.979119] mip6: Mobile IPv6
[    5.982057] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.987479] sit: IPv6 over IPv4 tunneling driver
[    5.992389] NET: Registered protocol family 17
[    5.996775] NET: Registered protocol family 15
[    6.001206] Bridge firewalling registered
[    6.005151] Ebtables v2.0 registered
[    6.008841] Bluetooth: RFCOMM TTY layer initialized
[    6.013653] Bluetooth: RFCOMM socket layer initialized
[    6.018716] Bluetooth: RFCOMM ver 1.11
[    6.022401] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.027636] Bluetooth: BNEP filters: protocol multicast
[    6.032776] Bluetooth: BNEP socket layer initialized
[    6.037662] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    6.043484] Bluetooth: HIDP socket layer initialized
[    6.048402] l2tp_core: L2TP core driver, V2.0
[    6.052690] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    6.057404] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    6.062175] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    6.066901] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[    6.073742] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    6.080757] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    6.089141] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    6.096423] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[    6.105405] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    6.114470] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    6.119612] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[    6.127943] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    6.132598] [BT_RFKILL]: Enter rfkill_rk_init
[    6.136997] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[    6.145057] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
[    6.153011] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[    6.160971] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[    6.168852] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[    6.177087] [BT_RFKILL]: Request irq for bt wakeup host
[    6.182285] [BT_RFKILL]: ** disable irq
[    6.186125] [BT_RFKILL]: ap6335 device registered.
[    6.191607] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
[    6.198173] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    6.205728] rk3288_init_suspend
[    6.208815] rk3288_suspend_init enter
[    6.212519] rk3288_suspend_init: pm_ctrbits =200007
[    6.217339] gpio_get_dts_info suspend:4
[    6.221106] gpio_get_dts_info resume:4
[    6.224811] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    6.232892] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    6.240894] clks_gating_suspend_init:clkgt info ok
[    6.245678] Registering SWP/SWPB emulation handler
[    6.250653] ddrfreq: verion 1.2 20140526
[    6.254524] ddrfreq: normal 396MHz video_1080p 240MHz video_4k 396MHz dualview 396MHz idle 0MHz suspend 200MHz reboot 396MHz
[    6.265548] ddrfreq: auto-freq=0
[    6.268729] ddrfreq: auto-freq-table[0] 240MHz
[    6.273098] ddrfreq: auto-freq-table[1] 324MHz
[    6.277462] ddrfreq: auto-freq-table[2] 396MHz
[    6.281825] ddrfreq: auto-freq-table[3] 528MHz
[    6.288431] regulator-dummy: disabling
[    6.292462] rockchip-hdmi-spdif rockchip-hdmi-spdif.32: ASoC: CPU DAI (null) not registered
[    6.300711] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    6.307236] platform rockchip-hdmi-spdif.32: Driver rockchip-hdmi-spdif requests probe deferral
[    6.315872] pcd_pullup, is_on 0
[    6.318991] file system registered
[    6.322837] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    6.329592] android_usb gadget: Number of LUNs=2
[    6.334139]  lun0: LUN: removable file: (no medium)
[    6.338930]  lun1: LUN: removable file: (no medium)
[    6.343851] android_usb gadget: android_usb ready
[    6.348997] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:00:02 UTC (1293883202)
[    6.361823] rk_spdif:rk_spdif_init
[    6.365325] rk_spdif:Entered spdif_probe
[    6.369374] rk_spdif:spdif:spdif probe ok!
[    6.373918] usbcore: registered new interface driver snd-usb-audio
[    6.380003] ALSA device list:
[    6.380101] rockchip-hdmi-spdif rockchip-hdmi-spdif.32:  rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
[    6.392366]   #0: RK_ES8323
[    6.395110]   #1: RK-HDMI-I2S
[    6.398024]   #2: RK-HDMI-SPDIF
[    6.401441] Freeing unused kernel memory: 592K (c0ae3000 - c0b77000)
[    6.412076] SELinux:  Permission attach_queue in class tun_socket not defined in policy.
[    6.420027] SELinux: the above unknown classes and permissions will be denied
[    6.808017] type=1403 audit(1293883202.960:2): policy loaded auid=4294967295 ses=4294967295
[    6.816370] SELinux: Loaded policy from /sepolicy
[    6.822868] type=1404 audit(1293883202.970:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    7.752717] init: could not import file '/init.usbstorage.rc' from '/init.rc'
[    7.760476] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    7.819411] init: /dev/hw_random not found
[    7.823486] keychord: using input dev ff680000.pwm for fevent
[    7.829160] keychord: using input dev rk29-keypad for fevent
[    7.839707] fs_mgr: parse_link_device : path = NULL
[    7.844515] fs_mgr: parse_link_device : path = NULL
[    7.849343] fs_mgr: parse_link_device : path = NULL
[    7.854201] fs_mgr: ---------------resize_fs blk_dev /dev/block/platform/ff0f0000.rksdmmc/by-name/system, type ext4fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[    7.872614] resize2fs: resize2fs 1.41.14 (22-Dec-2010)resize2fs: The filesystem is already 196608 blocks long.  Nothing to do!resize2fs:
[    7.891238] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[    7.914202] EXT4-fs (mmcblk0p8): recovery complete
[    7.919680] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    7.932142] EXT4-fs (mmcblk0p11): recovery complete
[    7.936952] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    8.061059] EXT4-fs (mmcblk0p12): 3 orphan inodes deleted
[    8.066391] EXT4-fs (mmcblk0p12): recovery complete
[    8.093238] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    8.118394] mali pd enabled
[    8.121149] clk enabled
[    8.124769] MALI_DVFS_STEP=5,div_dvfs=7
[    8.128541] mali_dvfs_infotbl[0].clock=99000,min_threshold=0,max_threshold=70
[    8.135581] mali_dvfs_infotbl[1].clock=179000,min_threshold=66,max_threshold=77
[    8.142785] mali_dvfs_infotbl[2].clock=297000,min_threshold=73,max_threshold=84
[    8.149966] mali_dvfs_infotbl[3].clock=417000,min_threshold=82,max_threshold=91
[    8.157165] mali_dvfs_infotbl[4].clock=480000,min_threshold=94,max_threshold=100
[    8.164558] turn on mali power
[    8.167563] kbase_platform_rk_init,register_reboot_notifier
[    8.173078] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
[    8.179878] mali ffa30000.gpu: Probed as mali0
[    8.186903] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[    8.210690] init: /dev/hw_random not found
[    8.223028] binder: 160:160 transaction failed 29189, size 0-0
[    8.224489] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
[    8.226950]init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
[    8.231793] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    8.233183] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
[    8.234117] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    8.234128] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    8.234307] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[    8.418272] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[    8.426338] init: powerctl: cannot expand '${sys.powerctl}'
[    8.431884] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[    8.442684] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[    8.452993] init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
[    8.463797] init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
[    8476247] android_usb: already disabled
[    8.482170] read descriptors
[    8.485016] read strings
[    8.487607] pcd_pullup, is_on 1
[    8.548408] fs_mgr: parse_link_device : path = NULL
[    8.553242] fs_mgr: parse_link_device : path = NULL
[    8.558119] fs_mgr: parse_link_device : path = NULL
shell@rk3288:/ $ [    9.069672] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.077029] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.084413] D1:camsys_open(717): camsys_marvin(ed944510) is opened!
[    9.090676] rockchip_gpio_request:GPIO7-13
[    9.094713] rockchip_gpio_set:GPIO7-13 level = 1
[    9.099310] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    9.105133] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[    9.111831] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7408,result=0x7408
[    9.122373] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    9.129178] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000  dev_name: OV8825) register success
[    9.162710] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.170723] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.175714] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.180628] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.189927] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.198354] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.206671] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.217144] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[    9.223432] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.230662] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.237875] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.261915] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[    9.268560] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[    9.277454] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x2000000) is deregister success
[    9.285875] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[    9.294112] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.301556] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.309040] D1:camsys_release(741): camsys_marvin(ed944510) is closed
[    9.318601] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.325984] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.333353] D1:camsys_open(717): camsys_marvin(ed944510) is opened!
[    9.339587] rockchip_gpio_set:GPIO7-13 level = 1
[    9.344148] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    9.349972] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[    9.356665] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7408,result=0x7408
[    9.367209] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    9.373988] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000  dev_name: OV8858) register success
[    9.400811] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.408795] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.413789] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.418698] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.427990] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.436326] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.444588] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.455047] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[    9.462587] E:camsys_i2c_write(77): i2c write dev(addr:0x20) failed!
[    9.468892] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.476113] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.483343] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.519856] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[    9.526492] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[    9.535322] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x2000000) is deregister success
[    9.543733] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[    9.551986] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.559430] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.566891] D1:camsys_release(741): camsys_marvin(ed944510) is closed
[    9.576632] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.584010] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.591397] D1:camsys_open(717): camsys_marvin(ed944510) is opened!
[    9.597614] D1:camsys_extdev_register(230): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
[    9.607550] D1:camsys_extdev_register(230): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[    9.617493] D1:camsys_extdev_register(230): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
[    9.627458] rockchip_gpio_set:GPIO7-13 level = 1
[    9.632024] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    9.637846] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[    9.644534] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7408,result=0x7408
[    9.655076] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    9.661856] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[    9.678551] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.686504] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.691516] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.696436] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.705716] D1:camsys_sysctl_extdev(335): Sysctl 11 success, gpio(11) set 1
[    9.713643] D1:camsys_sysctl_extdev(339): Sysctl 8 success, gpio(79) set 1
[    9.721467] D1:camsys_sysctl_extdev(339): Sysctl 7 success, gpio(78) set 1
[    9.731477] E:camsys_i2c_write(77): i2c write dev(addr:0x20) failed!
[    9.738951] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[    9.745256] D1:camsys_sysctl_extdev(335): Sysctl 7 success, gpio(78) set 0
[    9.752060] D1:camsys_sysctl_extdev(335): Sysctl 8 success, gpio(79) set 0
[    9.758867] D1:camsys_sysctl_extdev(339): Sysctl 11 success, gpio(11) set 0
[    9.797661] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[    9.804281] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[    9.813116] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x2000000) is deregister success
[    9.821535] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[    9.829766] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.837223] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.844663] D1:camsys_release(741): camsys_marvin(ed944510) is closed
[    9.859784] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.867155] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.874529] D1:camsys_open(717): camsys_marvin(ed944510) is opened!
[    9.880729] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[    9.887687] D1:camsys_extdev_register(255): Extdev(dev_id: 0x1000000  dev_name: OV2659) register success
[    9.916851] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.924823] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.929803] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.934735] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.944009] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.952344] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.960650] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.971154] E:camsys_i2c_write(77): i2c write dev(addr:0x60) failed!
[    9.977472] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.984689] rk3288-lcdc lcdc0: blank mode:0
[    9.984697] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.984704] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[   10.015951] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[   10.022617] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[   10.031449] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x1000000) is deregister success
[   10.039859] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[   10.048098] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[   10.055579] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[   10.062816] init: sys_prop: permission denied uid:1003  name:sys.gmali.version
[   10.070173] D1:camsys_release(741): camsys_marvin(ed944510) is closed
[   11.158121] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[   17.228695] healthd: battery l=50 v=3 t=2.6 h=2 st=3 chg=au
[   17.307263] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[   17.314305] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[   17.319611] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[   17.325046] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[   17.330520] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[   17.336016] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[   17.341501] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[   17.574262] phy_power_on: enable = 1
[   17.617256] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[   17.623594] eth0: device MAC address 3a:4c:28:b5:4e:43
[   17.632768] libphy: stmmac: probed
[   17.636117] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
[   17.642120] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active
[   17.755809] wifi_driver_write: wifi driver already rmmod
[   17.801479] acc_open
[   17.803642] acc_release
[   18.495760] FAT-fs (mmcblk0p14): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   18.539278] avc:  denied  { set } for property=sys.vold.hasAsec scontext=u:r:vold:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service
[   18.551987] init: sys_prop: permission denied uid:0  name:sys.vold.hasAsec
[   18.559207] init: no such service 'fuse_internal_sd'
[   19.078420] init: sys_prop: permission denied uid:10012  name:sys.gmali.version
[   19.772150] init: sys_prop: permission denied uid:10037  name:sys.gmali.version
[   20.900725] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
[   21.008300] f28c7234,f28c7234,f28c7234
[   33.148366] rk3288-hdmi ff980000.hdmi: Removed.
[   33.359098] rk3288-lcdc lcdc0: blank mode:4
[   33.980615] PM: suspend entry 2011-01-01 12:00:30.580880055 UTC
[   33.986630] PM: Syncing filesystems ... done.
[   34.007525] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   34.018822] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   34.029329] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDd543210
[   34.037754] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   34.037774] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   34.037787] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   34.038130] rk_spdif:Entered spdif_suspend
[   34.038139] rk_spdif:spdif:Entered spdif_suspend
[   34.040227] dwc_otg_hcd_suspend, usb device mode
[   34.042570] hym8563_rtc_set_alarm:diff_sec= 34s , use time
[   34.100809] [WLAN_RFKILL]: Enter rfkill_wlan_suspend
[   34.101526] phy_power_on: enable = 0
[   34.103777] PM: suspend of devices complete after 67.147 msecs
[   34.104915] PM: late suspend of devices complete after 1.133 msecs
[   34.106279] PM: noirq suspend of devices complete after 1.368 msecs
[   34.106303] Disabling non-boot CPUs ...
[   34.108725] CPU1: shutdown
[   34.114138] CPU2: shutdown
[   34.118660] CPU3: shutdown
[   34.122144] rockchip_pinctrl_suspend:bank_num=7, suspend_wakeup=0x10
[   34.122196] rkpm_enter:
[   34.122221] GPIO0_INTEN: 00000020
[   34.122232] GPIO4_INTEN: 80000000
[   34.122247] GPIO6_INTEN: 00400000
[   34.122254] GPIO7_INTEN: 00000010
[   34.206273] Resume caused by IRQ 120
[   34.206327] wakeup irq: 00000000 00000000 01000000 00000000
[   34.206343] wakeup gpio7: 00000010
[   34.206548] rockchip_pinctrl_resume:bank_num=7, suspend_wakeup=0x10
[   34.206583] Suspended for 0.000 seconds
[   34.207407] Enabling non-boot CPUs ...
[   34.208185] CPU1: Booted secondary processor
[   34.209372] CPU1 is up
[   34.209782] CPU2: Booted secondary processor
[   34.210372] CPU2 is up
[   34.210774] CPU3: Booted secondary processor
[   34.211389] CPU3 is up
[   34.213952] PM: noirq resume of devices complete after 2.571 msecs
[   34.215231] PM: early resume of devices complete after 0.774 msecs
[   34.215606] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[   34.215622] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[   34.215997] 1390..dw_mci_set_ios:  no card. [mmc1]
[   34.216181] dwc_otg_hcd_resume, usb device mode
[   34.221193] phy_power_on: enable = 1
[   34.256023] [WLAN_RFKILL]: Enter rfkill_wlan_resume
[   34.258653] PM: resume of devices complete after 44.097 msecs
[   34.258772] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   34.258785] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   34.258797] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   34.259334] rk_spdif:spdif:Entered spdif_resume
[   34.260126] [BT_RFKILL]: ** disable irq
[   34.491362] Restarting tasks ... done.
[   34.497531] PM: suspend exit 2011-01-01 12:01:04.244169334 UTC
[   34.542804] PM: suspend entry 2011-01-01 12:01:04.290180334 UTC
[   34.548654] PM: Syncing filesystems ... done.
[   34.560251] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   34.571639] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   34.582230] Suspending console(s) (use no_console_suspend to debug)
[   34.590698] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   34.590715] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   34.590728] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   34.591036] rk_spdif:Entered spdif_suspend
[   34.591056] rk_spdif:spdif:Entered spdif_suspend
[   34.593638] dpm_run_callback(): platform_pm_suspend+0x0/0x5c returns -16
[   34.593668] PM: Device alarmtimer failed to suspend: error -16
[   34.595983] PM: Some devices failed to suspend
[   34.597675] rk_spdif:spdif:Entered spdif_resume
[   34.608371] PM: resume of devices complete after 12.557 msecs
[   34.608471] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   34.608482] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   34.608497] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   34.609265] [BT_RFKILL]: ** disable irq
[   34.694252] Restarting tasks ... [   34.699785] healthd: battery l=50 v=3 t=2.6 h=2 st=3 chg=au
[   34.700512] PM: suspend exit 2011-01-01 12:01:04.450450001 UTC
done.
[   36.556944] PM: suspend entry 2011-01-01 12:01:06.336979751 UTC
[   36.563617] PM: Syncing filesystems ... done.
[   36.582344] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   36.593540] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   36.604078] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDd543210
[   36.612301] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   36.612320] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   36.612333] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   36.612652] rk_spdif:Entered spdif_suspend
[   36.612661] rk_spdif:spdif:Entered spdif_suspend
[   36.614743] dwc_otg_hcd_suspend, usb device mode
[   36.616584] hym8563_rtc_set_alarm:diff_sec= 9s , use time
[   36.674877] [WLAN_RFKILL]: Enter rfkill_wlan_suspend
[   36.675557] phy_power_on: enable = 0
[   36.677207] PM: suspend of devices complete after 66.024 msecs
[   36.678304] PM: late suspend of devices complete after 1.087 msecs
[   36.679547] PM: noirq suspend of devices complete after 1.245 msecs
[   36.679560] Disabling non-boot CPUs ...
[   36.682030] CPU1: shutdown
[   36.685883] CPU2: shutdown
[   36.688397] CPU3: shutdown
[   36.690221] rockchip_pinctrl_suspend:bank_num=7, suspend_wakeup=0x10
[   36.690261] rkpm_enter:
[   36.690282] GPIO0_INTEN: 00000020
[   36.690297] GPIO4_INTEN: 80000000
[   36.690306] GPIO6_INTEN: 00400000
[   36.690313] GPIO7_INTEN: 00000010
[   36.774587] Resume caused by IRQ 120
[   36.774627] wakeup irq: 00000000 00000000 01000000 00000000
[   36.774639] wakeup gpio7: 00000010
[   36.774849] rockchip_pinctrl_resume:bank_num=7, suspend_wakeup=0x10
[   36.774884] Suspended for 0.000 seconds
[   36.775683] Enabling non-boot CPUs ...
[   36.776457] CPU1: Booted secondary processor
[   36.777622] CPU1 is up
[   36.778032] CPU2: Booted secondary processor
[   36.778636] CPU2 is up
[   36.779026] CPU3: Booted secondary processor
[   36.779663] CPU3 is up
[   36.782172] PM: noirq resume of devices complete after 2.521 msecs
[   36.783210] PM: early resume of devices complete after 0.583 msecs
[   36.783587] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[   36.783604] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[   36.784100] 1390..dw_mci_set_ios:  no card. [mmc1]
[   36.784273] dwc_otg_hcd_resume, usb device mode
[   36.789374] phy_power_on: enable = 1
[   36.824116] [WLAN_RFKILL]: Enter rfkill_wlan_resume
[   36.826514] rk_spdif:spdif:Entered spdif_resume
[   36.826694] PM: resume of devices complete after 44.166 msecs
[   36.826981] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   36.826995] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   36.827007] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   36.827939] [BT_RFKILL]: ** disable irq
[   37.059034] Restarting tasks ... done.
[   37.065575] PM: suspend exit 2011-01-01 12:01:15.244285125 UTC
[   37.078050] PM: suspend entry 2011-01-01 12:01:15.256951333 UTC
[   37.083934] PM: Syncing filesystems ... done.
[   37.096142] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   37.107558] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   37.118100] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDd543210
[   37.126610] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   37.126628] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   37.126638] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   37.126975] rk_spdif:Entered spdif_suspend
[   37.126987] rk_spdif:spdif:Entered spdif_suspend
[   37.129176] dwc_otg_hcd_suspend, usb device mode
[   37.131024] hym8563_rtc_set_alarm:diff_sec= 50s , use time
[   37.192712] [WLAN_RFKILL]: Enter rfkill_wlan_suspend
[   37.193455] phy_power_on: enable = 0
[   37.195058] PM: suspend of devices complete after 69.623 msecs
[   37.196127] PM: late suspend of devices complete after 1.061 msecs
[   37.197176] PM: noirq suspend of devices complete after 1.050 msecs
[   37.197190] Disabling non-boot CPUs ...
[   37.199424] CPU1: shutdown
[   37.202864] CPU2: shutdown
[   37.205818] CPU3: shutdown
[   37.207733] rockchip_pinctrl_suspend:bank_num=7, suspend_wakeup=0x10
[   37.207793] rkpm_enter:
[   37.207815] GPIO0_INTEN: 00000020
[   37.207827] GPIO4_INTEN: 80000000
[   37.207836] GPIO6_INTEN: 00400000
[   37.207847] GPIO7_INTEN: 00000010
[   37.292261] Resume caused by IRQ 120
[   37.292305] wakeup irq: 00000000 00000000 01000000 00000000
[   37.292314] wakeup gpio7: 00000010
[   37.292518] rockchip_pinctrl_resume:bank_num=7, suspend_wakeup=0x10
[   37.292549] Suspended for 0.000 seconds
[   37.293400] Enabling non-boot CPUs ...
[   37.294189] CPU1: Booted secondary processor
[   37.295407] CPU1 is up
[   37.295805] CPU2: Booted secondary processor
[   37.296398] CPU2 is up
[   37.296810] CPU3: Booted secondary processor
[   37.297560] CPU3 is up
[   37.300068] PM: noirq resume of devices complete after 2.516 msecs
[   37.301147] PM: early resume of devices complete after 0.573 msecs
[   37.301465] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[   37.301528] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[   37.301921] 1390..dw_mci_set_ios:  no card. [mmc1]
[   37.302101] dwc_otg_hcd_resume, usb device mode
[   37.307156] phy_power_on: enable = 1
[   37.341916] [WLAN_RFKILL]: Enter rfkill_wlan_resume
[   37.344436] rk_spdif:spdif:Entered spdif_resume
[   37.344598] PM: resume of devices complete after 44.133 msecs
[   37.344977] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   37.344996] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   37.345058] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   37.345899] [BT_RFKILL]: ** disable irq
[   37.576879] Restarting tasks ... [   37.582570] healthd: battery l=50 v=3 t=2.6 h=2 st=3 chg=au
[   37.582884] PM: suspend exit 2011-01-01 12:02:05.243794251 UTC
done.
[   37.650300] PM: suspend entry 2011-01-01 12:02:05.312295084 UTC
[   37.656900] PM: Syncing filesystems ... done.
[   37.670502] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   37.682166] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   37.692777] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDd543210
[   37.701322] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   37.701340] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   37.701350] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   37.701657] rk_spdif:Entered spdif_suspend
[   37.701671] rk_spdif:spdif:Entered spdif_suspend
[   37.703801] dwc_otg_hcd_suspend, usb device mode
[   37.705634] hym8563_rtc_set_alarm:diff_sec= 60s , use time
[   37.769586] [WLAN_RFKILL]: Enter rfkill_wlan_suspend
[   37.770339] phy_power_on: enable = 0
[   37.772063] PM: suspend of devices complete after 71.943 msecs
[   37.773160] PM: late suspend of devices complete after 1.085 msecs
[   37.774456] PM: noirq suspend of devices complete after 1.298 msecs
[   37.774476] Disabling non-boot CPUs ...
[   37.776727] CPU1: shutdown
[   37.780235] CPU2: shutdown
[   37.783099] CPU3: shutdown
[   37.784923] rockchip_pinctrl_suspend:bank_num=7, suspend_wakeup=0x10
[   37.784971] rkpm_enter:
[   37.784999] GPIO0_INTEN: 00000020
[   37.785011] GPIO4_INTEN: 80000000
[   37.785020] GPIO6_INTEN: 00400000
[   37.785030] GPIO7_INTEN: 00000010
[   37.869313] Resume caused by IRQ 120
[   37.869357] wakeup irq: 00000000 00000000 01000000 00000000
[   37.869373] wakeup gpio7: 00000010
[   37.869576] rockchip_pinctrl_resume:bank_num=7, suspend_wakeup=0x10
[   37.869611] Suspended for 0.000 seconds
[   37.870445] Enabling non-boot CPUs ...
[   37.871231] CPU1: Booted secondary processor
[   37.872500] CPU1 is up
[   37.872907] CPU2: Booted secondary processor
[   37.873504] CPU2 is up
[   37.873925] CPU3: Booted secondary processor
[   37.874556] CPU3 is up
[   37.877078] PM: noirq resume of devices complete after 2.529 msecs
[   37.878151] PM: early resume of devices complete after 0.593 msecs
[   37.878601] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[   37.878625] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[   37.879005] 1390..dw_mci_set_ios:  no card. [mmc1]
[   37.879230] dwc_otg_hcd_resume, usb device mode
[   37.884315] phy_power_on: enable = 1
[   37.919049] [WLAN_RFKILL]: Enter rfkill_wlan_resume
[   37.921610] rk_spdif:spdif:Entered spdif_resume
[   37.921795] PM: resume of devices complete after 44.330 msecs
[   37.922093] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   37.922105] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   37.922114] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   37.923024] [BT_RFKILL]: ** disable irq
[   38.153993] Restarting tasks ... [   38.159329] healthd: battery l=50 v=3 t=2.6 h=2 st=3 chg=au
[   38.159544] PM: suspend exit 2011-01-01 12:03:05.243289083 UTC
done.
[   38.232034] PM: suspend entry 2011-01-01 12:03:05.316943667 UTC
[   38.238592] PM: Syncing filesystems ... done.
[   38.250034] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   38.261482] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   38.272034] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDd543210
[   38.280566] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   38.280579] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   38.280589] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   38.280919] rk_spdif:Entered spdif_suspend
[   38.280931] rk_spdif:spdif:Entered spdif_suspend
[   38.283139] dwc_otg_hcd_suspend, usb device mode
[   38.285083] hym8563_rtc_set_alarm:diff_sec= 60s , use time
[   38.346516] [WLAN_RFKILL]: Enter rfkill_wlan_suspend
[   38.347272] phy_power_on: enable = 0
[   38.348954] PM: suspend of devices complete after 69.556 msecs
[   38.350077] PM: late suspend of devices complete after 1.110 msecs
[   38.351459] PM: noirq suspend of devices complete after 1.379 msecs
[   38.351481] Disabling non-boot CPUs ...
[   38.353772] CPU1: shutdown
[   38.357057] CPU2: shutdown
[   38.359801] CPU3: shutdown
[   38.361596] rockchip_pinctrl_suspend:bank_num=7, suspend_wakeup=0x10
[   38.361645] rkpm_enter:
[   38.361672] GPIO0_INTEN: 00000020
[   38.361685] GPIO4_INTEN: 80000000
[   38.361693] GPIO6_INTEN: 00400000
[   38.361701] GPIO7_INTEN: 00000010
[   38.446075] Resume caused by IRQ 120
[   38.446120] wakeup irq: 00000000 00000000 01000000 00000000
[   38.446132] wakeup gpio7: 00000010
[   38.446337] rockchip_pinctrl_resume:bank_num=7, suspend_wakeup=0x10
[   38.446370] Suspended for 0.000 seconds
[   38.447194] Enabling non-boot CPUs ...
[   38.447966] CPU1: Booted secondary processor
[   38.449107] CPU1 is up
[   38.449501] CPU2: Booted secondary processor
[   38.450121] CPU2 is up
[   38.450554] CPU3: Booted secondary processor
[   38.451301] CPU3 is up
[   38.453895] PM: noirq resume of devices complete after 2.600 msecs
[   38.454969] PM: early resume of devices complete after 0.592 msecs
[   38.455379] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[   38.455403] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[   38.455778] 1390..dw_mci_set_ios:  no card. [mmc1]
[   38.455995] dwc_otg_hcd_resume, usb device mode
[   38.461060] phy_power_on: enable = 1
[   38.495754] [WLAN_RFKILL]: Enter rfkill_wlan_resume
[   38.498369] rk_spdif:spdif:Entered spdif_resume
[   38.498608] PM: resume of devices complete after 44.325 msecs
[   38.499024] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   38.499042] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   38.499051] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   38.499959] [BT_RFKILL]: ** disable irq
[   38.730640] Restarting tasks ... [   38.735874] healthd: battery l=50 v=3 t=2.6 h=2 st=3 chg=au
[   38.736723] PM: suspend exit 2011-01-01 12:04:05.243739417 UTC
done.
[   38.812953] PM: suspend entry 2011-01-01 12:04:05.321191209 UTC
[   38.819608] PM: Syncing filesystems ... done.
[   38.829586] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   38.841162] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   38.851976] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDd543210
[   38.860372] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   38.860404] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   38.860422] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   38.860771] rk_spdif:Entered spdif_suspend
[   38.860788] rk_spdif:spdif:Entered spdif_suspend
[   38.863080] dwc_otg_hcd_suspend, usb device mode
[   38.865007] hym8563_rtc_set_alarm:diff_sec= 60s , use time
[   38.923353] [WLAN_RFKILL]: Enter rfkill_wlan_suspend
[   38.924086] phy_power_on: enable = 0
[   38.925692] PM: suspend of devices complete after 66.450 msecs
[   38.926783] PM: late suspend of devices complete after 1.064 msecs
[   38.928065] PM: noirq suspend of devices complete after 1.281 msecs
[   38.928095] Disabling non-boot CPUs ...
[   38.930363] CPU1: shutdown
[   38.933837] CPU2: shutdown
[   38.936546] CPU3: shutdown
[   38.938449] rockchip_pinctrl_suspend:bank_num=7, suspend_wakeup=0x10
[   38.938498] rkpm_enter:
[   38.938521] GPIO0_INTEN: 00000020
[   38.938530] GPIO4_INTEN: 80000000
[   38.938541] GPIO6_INTEN: 00400000
[   38.938549] GPIO7_INTEN: 00000010
[   39.022849] Resume caused by IRQ 120
[   39.022896] wakeup irq: 00000000 00000000 01000000 00000000
[   39.022909] wakeup gpio7: 00000010
[   39.023113] rockchip_pinctrl_resume:bank_num=7, suspend_wakeup=0x10
[   39.023146] Suspended for 0.000 seconds
[   39.023973] Enabling non-boot CPUs ...
[   39.024732] CPU1: Booted secondary processor
[   39.025950] CPU1 is up
[   39.026371] CPU2: Booted secondary processor
[   39.026973] CPU2 is up
[   39.027391] CPU3: Booted secondary processor
[   39.028069] CPU3 is up
[   39.030570] PM: noirq resume of devices complete after 2.508 msecs
[   39.031647] PM: early resume of devices complete after 0.587 msecs
[   39.031963] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[   39.032032] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[   39.032418] 1390..dw_mci_set_ios:  no card. [mmc1]
[   39.032617] dwc_otg_hcd_resume, usb device mode
[   39.037755] phy_power_on: enable = 1
[   39.072486] [WLAN_RFKILL]: Enter rfkill_wlan_resume
[   39.075035] rk_spdif:spdif:Entered spdif_resume
[   39.075140] PM: resume of devices complete after 44.181 msecs
[   39.075541] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   39.075556] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   39.075565] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   39.076071] [BT_RFKILL]: ** disable irq
[   39.307419] Restarting tasks ... [   39.312775] healthd: battery l=50 v=3 t=2.6 h=2 st=3 chg=au
[   39.313377] PM: suspend exit 2011-01-01 12:05:05.243674083 UTC
done.
[   39.382791] PM: suspend entry 2011-01-01 12:05:05.314189458 UTC
[   39.389260] PM: Syncing filesystems ... done.
[   39.400272] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   39.411893] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   39.422465] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDd543210
[   39.430885] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   39.430995] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   39.431011] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee37c300
[   39.431363] rk_spdif:Entered spdif_suspend
[   39.431378] rk_spdif:spdif:Entered spdif_suspend
[   39.435420] hym8563_rtc_set_alarm:diff_sec= 60s , use time
[   39.436123] dwc_otg_hcd_suspend, usb device mode
[   39.490261] [WLAN_RFKILL]: Enter rfkill_wlan_suspend
[   39.490986] phy_power_on: enable = 0
[   39.492731] PM: suspend of devices complete after 62.897 msecs
[   39.493853] PM: late suspend of devices complete after 1.103 msecs
[   39.495133] PM: noirq suspend of devices complete after 1.274 msecs
[   39.495159] Disabling non-boot CPUs ...
[   39.497531] CPU1: shutdown
[   39.501225] CPU2: shutdown
[   39.503881] CPU3: shutdown
[   39.505663] rockchip_pinctrl_suspend:bank_num=7, suspend_wakeup=0x10
[   39.505726] rkpm_enter:
[   39.505751] GPIO0_INTEN: 00000020
[   39.505761] GPIO4_INTEN: 80000000
[   39.505772] GPIO6_INTEN: 00400000
[   39.505780] GPIO7_INTEN: 00000010
[   39.590037] Resume caused by IRQ 126, otg_bvalid
[   39.590085] wakeup irq: 00000000 00000000 40000000 00000000
[   39.590284] rockchip_pinctrl_resume:bank_num=7, suspend_wakeup=0x0
[   39.590322] Suspended for 0.000 seconds
[   39.591154] Enabling non-boot CPUs ...
[   39.591917] CPU1: Booted secondary processor
[   39.593057] CPU1 is up
[   39.593474] CPU2: Booted secondary processor
[   39.594208] CPU2 is up
[   39.594489] ***************vbus detect*****************
[   39.594629] CPU3: Booted secondary processor
[   39.595741] CPU3 is up
[   39.596687] rk_battery_charger_detect_cb , battery_charger_detect 1
[   39.598304] PM: noirq resume of devices complete after 2.574 msecs
[   39.598974] PM: early resume of devices complete after 0.447 msecs
[   39.599332] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[   39.599352] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[   39.599785] 1390..dw_mci_set_ios:  no card. [mmc1]
[   39.599980] dwc_otg_hcd_resume, usb device mode
[   39.605057] phy_power_on: enable = 1
[   39.639761] [WLAN_RFKILL]: Enter rfkill_wlan_resume
[   39.641779] PM: resume of devices complete after 43.475 msecs
[   39.641892] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   39.641905] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   39.641917] cpufreq: cpufreq_resume: Failed to start governor for policy: ee37c300
[   39.642381] rk_spdif:spdif:Entered spdif_resume
[   39.642928] [BT_RFKILL]: ** disable irq
[   39.776409] Using Buffer DMA mode
[   39.776428] Periodic Transfer Interrupt Enhancement - disabled
[   39.776437] Multiprocessor Interrupt Enhancement - disabled
[   39.776446] OTG VER PARAM: 0, OTG VER FLAG: 0
[   39.776454] ^^^^^^^^^^^^^^^^^Device Mode
[   39.776550] *******************soft connect!!!*******************
[   39.892843] USB RESET
[   39.913866] Restarting tasks ... done.
[   39.920830] PM: suspend exit 2011-01-01 12:05:48.285061875 UTC
[   39.958650] dsi->phy.sys_clk =24000000
[   39.986214] android_work: sent uevent USB_STATE=CONNECTED
[   39.989726] USB RESET
[   40.144592] android_usb gadget: high-speed config #1: android
[   40.145683] android_work: sent uevent USB_STATE=CONFIGURED
[   40.450787] rk3288-lcdc lcdc0: blank mode:0
[   40.460774] rk3288-hdmi ff980000.hdmi: Removed.
[   50.042220] rk3288-hdmi ff980000.hdmi: Removed.
[   50.257649] rk3288-lcdc lcdc0: blank mode:4
[   50.281099] ********session end ,soft disconnect***********
[   50.286830] USB RESET
[   50.287046] pcd_pullup, is_on 0
[   50.292551] android_work: sent uevent USB_STATE=DISCONNECTED
[   50.292636] read descriptors
[   50.292656] read strings
[   50.292779] pcd_pullup, is_on 1
[   50.428352] rk_battery_charger_detect_cb , battery_charger_detect 0
[   50.715415] PM: suspend entry 2011-01-01 12:05:59.255126630 UTC
[   50.721276] PM: Syncing filesystems ... done.
[   50.748877] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   50.760347] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   50.771024] Suspending console(s) (use no_console_suspend to debug)
DDR Version 1.00 20141007
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT


U-Boot 2014.10-RK3288-01 (Nov 27 2014 - 16:44:27)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
power key: bank-0 pin-5
pmic:act8846
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2014-11-27#2.19
empty serial no.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
Hit any key to stop autoboot:  0
kernel   @ 0x02000000 (0x00653548)
ramdisk  @ 0x04bf0000 (0x00122fc0)
Secure Boot state: 0
bootrk: do_bootm_linux...
   Loading Device Tree to 0480c000, end 0482a935 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (firefly@tchip-server) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #12 SMP PREEMPT Wed Apr 22 11:14:57 CST 2015
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] rockchip_ion_reserve
[    0.000000] ion heap(cma): base(40000000) size(28000000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 640 MiB at 40000000
[    0.000000] ion_reserve: cma reserved base 40000000 size 671088640
[    0.000000] cma: CMA: reserved 16 MiB at 2e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1ddc000 s14016 r8192 d14656 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[    0.000000] Kernel command line: console=ttyS2 earlyprintk androidboot.hardware=rk30board androidboot.console=ttyS2 board.ap_has_alsa=0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user) storagemedia=emmc loader.timestamp=2014-11-27_16:44:27
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 1388480k/1388480k available, 708672k reserved, 663552K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0ae28fc   (11115 kB)
[    0.000000]       .init : 0xc0ae3000 - 0xc0b776c0   ( 594 kB)
[    0.000000]       .data : 0xc0b78000 - 0xc0c7f438   (1054 kB)
[    0.000000]        .bss : 0xc0c7f438 - 0xc0d9d7c4   (1145 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[    0.000000] rkclk_init_clks: cnt_parent = 7
[    0.000000] rkclk_init_clks: cnt_rate = 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 3
[    0.000000] channel:0, lkg:33
[    0.000000] target-temp:80
[    0.000000] channel:2, lkg:0
[    0.000000] target-temp:80
[    0.000000] channel:0, lkg:33
[    0.000000] target-temp:80
[    0.000000] channel:1, lkg:32
[    0.000000] target-temp:80
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.304435] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.304451] pid_max: default: 32768 minimum: 301
[    0.304555] Security Framework initialized
[    0.304572] SELinux:  Initializing.
[    0.304643] Mount-cache hash table entries: 512
[    0.305283] Initializing cgroup subsys debug
[    0.305297] Initializing cgroup subsys memory
[    0.305323] Initializing cgroup subsys freezer
[    0.305351] CPU: Testing write buffer coherency: ok
[    0.305660] /cpus/cpu@0 missing clock-frequency property
[    0.305673] /cpus/cpu@1 missing clock-frequency property
[    0.305682] /cpus/cpu@2 missing clock-frequency property
[    0.305691] /cpus/cpu@3 missing clock-frequency property
[    0.305754] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.305805] Setting up static identity map for 0xc07e2690 - 0xc07e26e8
[    0.308762] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x1661 (version 3.0)
[    0.382490] CPU1: Booted secondary processor
[    0.382523] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.402176] CPU2: Booted secondary processor
[    0.402199] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.421883] CPU3: Booted secondary processor
[    0.421906] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.422008] Brought up 4 CPUs
[    0.422036] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.422045] CPU: All CPU(s) started in SVC mode.
[    0.422771] devtmpfs: initialized
[    0.427789] pinctrl core: initialized pinctrl subsystem
[    0.428038] regulator-dummy: no parameters
[    0.439438] NET: Registered protocol family 16
[    0.441234] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.441598] ion_snapshot: 0x2e248000 map to 0xf0107000 and copy to 0xc0d78dc4 (version 0.1)
[    0.441916] Registered FIQ tty driver
[    0.442330] fiq-debugger is disabled in device tree
[    0.442898] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[    0.442926] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[    0.442944] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[    0.442961] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[    0.443049] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[    0.443112] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[    0.443172] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[    0.443231] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[    0.443291] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[    0.443350] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[    0.443410] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[    0.443469] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[    0.443535] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[    0.443597] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[    0.443611] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[    0.443622] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[    0.443634] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[    0.444142] rockchip_interrupts_register:bank_num=7
[    0.446046] rockchip_pinctrl_probe:init ok
[    0.452121] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.452209] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.452223] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.452384] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.452455] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.452467] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.452629] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.452699] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.452711] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.452865] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[    0.452933] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.452945] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.453113] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.453186] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453198] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.453355] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.453426] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453437] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.453608] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.453680] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453692] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[    0.455595] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.455608] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.455805] DDR DEBUG: version 1.00 20140603
[    0.455834] DDR DEBUG: Channel a:
[    0.455842] DDR DEBUG: DDR3 Device
[    0.455855] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.455864] DDR DEBUG: Channel b:
[    0.455871] DDR DEBUG: DDR3 Device
[    0.455883] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.455892] DDR DEBUG: addr=0xc87000
[    0.455901] DDR DEBUG: stride=9, size=256, halfcap=40000000
[    0.455910] DDR DEBUG: socAddr[0]=0xc87000, socAddr[1]=0xc87100
[    0.455919] DDR DEBUG: chAddr[0]=0xc87000, chAddr[1]=0xc87000
[    0.455930] DDR DEBUG: dtar[0]=0x70190000, dtar[1]=0x70190000
[    0.456169] DDR DEBUG: init success!!! freq=300MHz
[    0.456177] DDR DEBUG: Channel a:
[    0.456190] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=3,0, DGSL=1,1 extra clock, DGPS=360,360
[    0.456202] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456214] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=3,0, DGSL=1,1 extra clock, DGPS=360,360
[    0.456226] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456237] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.456247] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.456255] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.456262] DDR DEBUG: Channel b:
[    0.456273] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456285] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456297] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456309] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.456320] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.456329] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.456337] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.478097] bio: create slab <bio-0> at 0
[    0.478940] SCSI subsystem initialized
[    0.479090] usbcore: registered new interface driver usbfs
[    0.479133] usbcore: registered new interface driver hub
[    0.479212] usbcore: registered new device driver usb
[    0.480587] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.482713] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.484310] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.485228] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[    0.485465] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.485935] media: Linux media interface: v0.10
[    0.485975] Linux video capture interface: v2.00
[    0.486023] pps_core: LinuxPPS API ver. 1 registered
[    0.486033] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.486053] PTP clock support registered
[    0.486523] Rockchip ion module is successfully loaded (v1.0)
[    0.486674] Advanced Linux Sound Architecture Driver Initialized.
[    0.487057] Bluetooth: Core ver 2.16
[    0.487090] NET: Registered protocol family 31
[    0.487099] Bluetooth: HCI device and connection manager initialized
[    0.487114] Bluetooth: HCI socket layer initialized
[    0.487126] Bluetooth: L2CAP socket layer initialized
[    0.487151] Bluetooth: SCO socket layer initialized
[    0.487358] cfg80211: Calling CRDA to update world regulatory domain
[    0.488592] act8846_i2c_probe,line=898
[    0.489587] act8846_parse_dt,line=746
[    0.490311] act8846_i2c_probe: act8846_pmic_hold=1
[    0.490330] act8846_i2c_probe: act8846_pmic_sleep=1
[    0.490344] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
[    0.490359] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
[    0.492217] act_dcdc1: 1200 mV
[    0.494930] vccio: 3300 mV
[    0.496782] vdd_logic: 700 <--> 1500 mV at 1100 mV
[    0.499493] act_dcdc4: 2000 mV
[    0.500733] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[    0.502794] act_ldo2: 1000 mV
[    0.504870] act_ldo3: 2800 mV
[    0.506935] act_ldo4: 3300 mV
[    0.508987] act_ldo5: 3300 mV
[    0.511088] act_ldo6: 1000 mV
[    0.513156] vcc_18: 1800 mV
[    0.515225] act_ldo8: 1800 mV
[    0.519986] vdd_arm: 712 <--> 1500 mV at 1000 mV
[    0.524686] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[    0.525456] Switching to clocksource arch_sys_counter
[    0.545605] rk-fb rockchip-fb: rk fb ion client create success!
[    0.545618] rk-fb rockchip-fb: rockchip framebuffer driver probe
[    0.546018] rk-screen rk_screen.8: rockchip screen probe success
[    0.546180] rk32-lvds ff96c000.lvds: screen is not lvds/rgb!
[    0.546199] rk32-lvds: probe of ff96c000.lvds failed with error -22
[    0.546515] rk32-edp ff970000.edp: screen is not edp!
[    0.546530] rk32-edp: probe of ff970000.edp failed with error -22
[    0.546679] rk32-dsi
[    0.546820] dsi->host.irq =51
[    0.546838] load mipi dsi chip:rk_mipi_dsi.0 id:3133302a
[    0.546845] mipi_dsi v1.3 2014-04-17
[    0.546870] rk32-mipi ff960000.mipi: rk mipi_dsi probe success!
[    0.546881] rk32-mipi ff960000.mipi: rockchip mipi_dsi v1.1 2014-06-17
[    0.547405] rk3288-lcdc lcdc0: request lcd_rst gpio fail:-16
[    0.547647] graphics fb0: rockchip framebuffer registerd:fb0
[    0.547979] graphics fb1: rockchip framebuffer registerd:fb1
[    0.548132] graphics fb2: rockchip framebuffer registerd:fb2
[    0.548282] graphics fb3: rockchip framebuffer registerd:fb3
[    0.559351] rk3288-lcdc lcdc0: lcdc0: dclk:120000000>>fps:50
[    0.559365] dsi->phy.sys_clk =24000000
[    1.056876] rk3288-lcdc lcdc0: wakeup from standby!
[    1.081883] alloc_buffer:ion_phy_addr=0x40000000
[    1.094351] fb0:phy:40000000>>vir:f0171000>>len:0x1900000
[    1.100170] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
[    1.100329] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[    1.100340] rk_fb_trsm_ops_get:un supported transmitter:0!
[    1.100554] graphics fb4: rockchip framebuffer registerd:fb4
[    1.100855] graphics fb5: rockchip framebuffer registerd:fb5
[    1.101012] graphics fb6: rockchip framebuffer registerd:fb6
[    1.101164] graphics fb7: rockchip framebuffer registerd:fb7
[    1.148422] alloc_buffer:ion_phy_addr=0x41900000
[    1.148438] fb0:phy:41900000>>vir:  (null)>>len:0x3000000
[    1.148453] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
[    1.149115] rockchip_set_mux:warning ignore bank num 15
[    1.149235] rockchip_set_mux:warning ignore bank num 15
[    1.149345] rockchip_set_mux:warning ignore bank num 15
[    1.149451] rockchip_set_mux:warning ignore bank num 15
[    1.149556] rockchip_set_mux:warning ignore bank num 15
[    1.149658] rockchip_set_mux:warning ignore bank num 15
[    1.150220] rockchip_set_mux:warning ignore bank num 15
[    1.150361] rockchip_set_mux:warning ignore bank num 15
[    1.150893] rockchip_set_mux:warning ignore bank num 15
[    1.151033] rockchip_set_mux:warning ignore bank num 15
[    1.151580] rockchip_set_mux:warning ignore bank num 15
[    1.151716] rockchip_set_mux:warning ignore bank num 15
[    1.152245] rockchip_set_mux:warning ignore bank num 15
[    1.152391] rockchip_set_mux:warning ignore bank num 15
[    1.153773] NET: Registered protocol family 2
[    1.154201] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.154332] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.154466] TCP: Hash tables configured (established 8192 bind 8192)
[    1.154514] TCP: reno registered
[    1.154529] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.154562] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.154766] NET: Registered protocol family 1
[    1.154949] Unpacking initramfs...
[    1.217161] Freeing initrd memory: 1160K (c4bf0000 - c4d12000)
[    1.217749] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    1.218223] probe device ff9a0000.vpu_service
[    1.218396] vpu_service: power on
[    1.219453] checking hw id 4831
[    1.219826] vpu_service set to auto frequency mode
[    1.219861] vpu_service: power off...
[    1.219897] done
[    1.219904] init success
[    1.219951] probe device ff9c0000.hevc_service
[    1.220140] hevc_service: power on
[    1.221174] checking hw id 6867
[    1.221387] hevc_service: power off...
[    1.221422] done
[    1.221430] init success
[    1.221542] rknandbase v1.0 2014-03-31
[    1.221641] rknand ff400000.nandc0: no irq resource?
[    1.221770] rknand_driver:ret = 0
[    1.223353] audit: initializing netlink socket (disabled)
[    1.223390] type=2000 audit(0.920:1): initialized
[    1.224171] bounce pool size: 64 pages
[    1.228578] fuse init (API version 7.22)
[    1.228913] msgmni has been set to 1450
[    1.230637] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.230652] io scheduler noop registered
[    1.230660] io scheduler deadline registered
[    1.230743] io scheduler cfq registered (default)
[    1.234341] rga2 ff920000.rga: rga ion client create success!
[    1.234479] rga: Driver loaded succesfully
[    1.235094] IEP Driver loaded succesfully
[    1.235185] Module initialized.
[    1.236031] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.236048] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    1.237329] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.237346] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.237620] pwm-voltage-regulator pwm_regulator.28: unable to request PWM, trying legacy API
[    1.237635] pwm-voltage-regulator pwm_regulator.28: unable to request legacy PWM
[    1.237643] pwm_regulator_probe:error
[    1.237663] platform pwm_regulator.28: Driver pwm-voltage-regulator requests probe deferral
[    1.237987] rk_serial.c v1.8 2014-03-04
[    1.238192] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    1.238383] serial ff180000.serial: membase f1a74000
[    1.238512] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2
[    2.916479] console [ttyS2] enabled
[    2.920106] serial ff690000.serial: membase fed60000
[    2.927661] loop: module loaded
[    2.931304] SCSI Media Changer driver v0.25
[    2.935817] tun: Universal TUN/TAP device driver, 1.6
[    2.940822] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.947019] vmac_init.
[    2.949844] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    2.956535] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[    2.963479] stmmac_probe_config_dt: clock input or output? (input).
[    2.969653] stmmac_probe_config_dt: TX delay(0x30).
[    2.974448] stmmac_probe_config_dt: RX delay(0x20).
[    2.979301] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    2.984608] stmmc_pltfr_init:
[    2.987812] stmmc_pltfr_init: init for RGMII
[    2.992013] tx delay=0x30
[    2.992013] rx delay=0x20
[    2.997596] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    3.002563]  Normal descriptors
[    3.005666]  Ring mode enabled
[    3.008662]  DMA HW capability register supported
[    3.013116]  RX Checksum Offload Engine supported (type 2)
[    3.018710]  TX Checksum insertion supported
[    3.022908]  Wake-Up On Lan supported
[    3.026545]  Enable RX Mitigation via HW Watchdog Timer
[    3.032082] PPP generic driver version 2.4.2
[    3.036441] PPP BSD Compression module registered
[    3.041080] PPP Deflate Compression module registered
[    3.046071] PPP MPPE Compression module registered
[    3.050785] NET: Registered protocol family 24
[    3.055185] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    3.064693] CSLIP: code copyright 1989 Regents of the University of California.
[    3.071878] Rockchip WiFi SYS interface (V1.00) ...
[    3.076800] esp_mem_init enter date Dec 26 2014 09:48:50
[    3.082054] esp_mem_init complete
[    3.085473] usbcore: registered new interface driver catc
[    3.090809] usbcore: registered new interface driver kaweth
[    3.096311] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    3.103627] usbcore: registered new interface driver pegasus
[    3.109219] usbcore: registered new interface driver rtl8150
[    3.114823] usbcore: registered new interface driver r8152
[    3.120227] hso: drivers/net/usb/hso.c: Option Wireless
[    3.125432] usbcore: registered new interface driver hso
[    3.130703] usbcore: registered new interface driver asix
[    3.136068] usbcore: registered new interface driver ax88179_178a
[    3.142086] usbcore: registered new interface driver cdc_ether
[    3.147859] usbcore: registered new interface driver cdc_eem
[    3.153461] usbcore: registered new interface driver dm9601
[    3.158980] usbcore: registered new interface driver dm9620
[    3.164507] usbcore: registered new interface driver smsc75xx
[    3.170195] usbcore: registered new interface driver smsc95xx
[    3.175897] usbcore: registered new interface driver gl620a
[    3.181403] usbcore: registered new interface driver net1080
[    3.187006] usbcore: registered new interface driver plusb
[    3.192440] usbcore: registered new interface driver rndis_host
[    3.198301] usbcore: registered new interface driver cdc_subset
[    3.204159] usbcore: registered new interface driver zaurus
[    3.209664] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    3.217002] usbcore: registered new interface driver int51x1
[    3.222607] usbcore: registered new interface driver kalmia
[    3.228116] usbcore: registered new interface driver ipheth
[    3.233638] usbcore: registered new interface driver sierra_net
[    3.239500] usbcore: registered new interface driver cx82310_eth
[    3.245459] usbcore: registered new interface driver cdc_ncm
[    3.251053] usbcore: registered new interface driver qmi_wwan
[    3.256755] usbcore: registered new interface driver cdc_mbim
[    3.262417] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.271195] ehci_rk_probe f1b00000 f1b00010
[    3.275329] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
[    3.282799] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    3.291223] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    3.310248] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[    3.316816] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.323544] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.330659] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[    3.336907] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    3.342226] usb usb1: SerialNumber: ff500000.usb
[    3.347173] hub 1-0:1.0: USB hub found
[    3.350890] hub 1-0:1.0: 1 port detected
[    3.379115] ehci_rk_probe ok
[    3.382086] usbcore: registered new interface driver cdc_acm
[    3.387650] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.395571] usbcore: registered new interface driver usblp
[    3.401010] usbcore: registered new interface driver cdc_wdm
[    3.406625] usbcore: registered new interface driver usb-storage
[    3.412572] usbcore: registered new interface driver ums-alauda
[    3.418418] usbcore: registered new interface driver ums-cypress
[    3.424362] usbcore: registered new interface driver ums-datafab
[    3.430303] usbcore: registered new interface driver ums_eneub6250
[    3.436403] usbcore: registered new interface driver ums-freecom
[    3.442346] usbcore: registered new interface driver ums-isd200
[    3.448245] usbcore: registered new interface driver ums-jumpshot
[    3.454262] usbcore: registered new interface driver ums-karma
[    3.460041] usbcore: registered new interface driver ums-onetouch
[    3.466058] usbcore: registered new interface driver ums-sddr09
[    3.471916] usbcore: registered new interface driver ums-sddr55
[    3.477774] usbcore: registered new interface driver ums-usbat
[    3.483578] usbcore: registered new interface driver usbserial
[    3.489355] usbcore: registered new interface driver usbserial_generic
[    3.495791] usbserial: USB Serial support registered for generic
[    3.501733] usbcore: registered new interface driver option
[    3.507247] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.514144] usbcore: registered new interface driver trancevibrator
[    3.520318] usb20_otg: version 3.10a 21-DEC-2012
[    3.525229] f1b80040
[    3.527401] Core Release: 3.10a
[    3.530493] Setting default values for core params
[    3.535306] Using Buffer DMA mode
[    3.538581] Periodic Transfer Interrupt Enhancement - disabled
[    3.544314] Multiprocessor Interrupt Enhancement - disabled
[    3.549801] OTG VER PARAM: 0, OTG VER FLAG: 0
[    3.554085] ^^^^^^^^^^^^^^^^^Device Mode
[    3.557953] Dedicated Tx FIFOs mode
[    3.561391] pcd_init otg_dev = ed675540
[    3.565284] usb20_otg ff580000.usb: DWC OTG Controller
[    3.570365] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    3.577760] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    3.583453] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.590142] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.597253] usb usb2: Product: DWC OTG Controller
[    3.601880] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    3.607453] usb usb2: SerialNumber: ff580000.usb
[    3.612346] hub 2-0:1.0: USB hub found
[    3.616061] hub 2-0:1.0: 1 port detected
[    3.620208] usb20_host: version 3.10a 21-DEC-2012
[    3.627292] f1c00040
[    3.629445] Core Release: 3.10a
[    3.632539] Setting default values for core params
[    3.637351] Using Buffer DMA mode
[    3.640613] Periodic Transfer Interrupt Enhancement - disabled
[    3.646359] Multiprocessor Interrupt Enhancement - disabled
[    3.651837] OTG VER PARAM: 0, OTG VER FLAG: 0
[    3.656128] ^^^^^^^^^^^^^^^^^^Host Mode
[    3.659917] usb20_host ff540000.usb: DWC OTG Controller
[    3.665080] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    3.672537] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    3.678359] Init: Power Port (0)
[    3.681579] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.688266] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.695375] usb usb3: Product: DWC OTG Controller
[    3.700002] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    3.705574] usb usb3: SerialNumber: ff540000.usb
[    3.710457] hub 3-0:1.0: USB hub found
[    3.714209] hub 3-0:1.0: 1 port detected
[    3.718580] .. rk pwm remotectl v1.0 init
[    3.722593] remotectl probe j=0x0
[    3.726005] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[    3.732501] pwm enable val=0x646205
[    3.736293] usbcore: registered new interface driver xpad
[    3.741642] usbcore: registered new interface driver usb_acecad
[    3.747516] usbcore: registered new interface driver aiptek
[    3.753040] usbcore: registered new interface driver gtco
[    3.758382] usbcore: registered new interface driver hanwang
[    3.763992] usbcore: registered new interface driver kbtab
[    3.769424] usbcore: registered new interface driver wacom
[    3.910442] input: synaptics_dsx as /devices/ff140000.i2c/i2c-1/1-0020/input/input1
[    3.920963] rtc_hym8563 0-0051: clock/calendar information is no longer guaranteed
[    3.931236] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    3.937528] i2c /dev entries driver
[    3.941658] IR NEC protocol handler initialized
[    3.946115] IR RC5(x) protocol handler initialized
[    3.950852] IR RC6 protocol handler initialized
[    3.955307] IR JVC protocol handler initialized
[    3.959770] IR Sony protocol handler initialized
[    3.964310] IR RC5 (streamzap) protocol handler initialized
[    3.969804] IR SANYO protocol handler initialized
[    3.974429] IR MCE Keyboard/mouse protocol handler initialized
[    3.980302] usbcore: registered new interface driver uvcvideo
[    3.985951] USB Video Class driver (1.1.1)
[    3.990006] CamSys driver version: v0.23.0,  CamSys head file version: v0.9.0
[    3.998385] D1:camsys_platform_probe(1067): 1-gpios-cifpower锛gpio=236
[    4.005002] D1:camsys_platform_probe(1070): gpios-cifpower锛gpio_request
[    4.011788] D1:camsys_platform_probe(1072): 1-gpios-cifpower锛gpio_request=0
[    4.018904] D1:camsys_platform_probe(1079): gpios-cifpower锛236 high
[    4.025385] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[    4.036215] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xf1ab0000  size: 0x4000)
[    4.048976] D1:camsys_platform_probe(1183): ff910000.isp memory:
[    4.054886] D1:camsys_platform_probe(1193):     Register memory (phy: 0xff910000 vir: 0xf1ae0000 size: 0x10000)
[    4.064813] D1:camsys_platform_probe(1188):     I2c memory (phy: 0x2d6a5000 vir: 0xed6a5000 size: 0x1000)
[    4.074238] D1:camsys_platform_probe(1208): Probe ff910000.isp device success
[    4.082583] rockchip_temp_probe,line=362
[    4.136792] tsadc ff280000.tsadc: initialized
[    4.141437] device-mapper: uevent: version 1.0.3
[    4.146180] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    4.154746] Bluetooth: HCI UART driver ver 2.2
[    4.159139] Bluetooth: HCI H4 protocol initialized
[    4.163849] Bluetooth: HCILL protocol initialized
[    4.171557] cpufreq version 1.0, suspend freq 1200 MHz
[    4.176800] cpuidle: using governor ladder
[    4.180830] cpuidle: using governor menu
[    4.184711] Synopsys Designware Multimedia Card Interface Driver
[    4.190872] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    4.196985] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[    4.203972] 3379..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[    4.210422] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    4.216308] 1390..dw_mci_set_ios:  no card. [mmc0]
[    4.235207] 1390..dw_mci_set_ios:  no card. [mmc0]
[    4.254927] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    4.255004] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    4.255028] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    4.255685] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    4.285688] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    4.292729] 3379..dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc1]
[    4.299147] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    4.305021] mmc1: no vmmc regulator found
[    4.309130] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[    4.315921] 1390..dw_mci_set_ios:  no card. [mmc1]
[    4.333591] 1390..dw_mci_set_ios:  no card. [mmc1]
[    4.338326] mmc0: BKOPS_EN bit is not set
[    4.343554] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[    4.353243] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    4.361691] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    4.361703] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
[    4.361816] mmc0: new high speed MMC card at address 0001
[    4.362121] mmcblk0: mmc0:0001 MAG2GA 14.5 GiB
[    4.362440]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    4.362450]       misc: 0x000800000 -- 0x000c00000 (4 MB)
[    4.362458]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    4.362465]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[    4.362472]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
[    4.362478]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[    4.362485]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
[    4.362492]      cache: 0x00a000000 -- 0x012000000 (128 MB)
[    4.362499]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
[    4.362506]     system: 0x012400000 -- 0x042400000 (768 MB)
[    4.362513]   metadata: 0x042400000 -- 0x042800000 (4 MB)
[    4.362520]   userdata: 0x042800000 -- 0x082800000 (1024 MB)
[    4.362527] radical_update: 0x082800000 -- 0x086800000 (64 MB)
[    4.362534]       user: 0x086800000 -- 0x3a3a00000 (12754 MB)
[    4.364345]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p141390..dw_mci_set_ios:  no card. [mmc1]
[    4.473503] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[    4.479890] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    4.486083] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    4.493151] 3379..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    4.499489] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    4.505655] 1390..dw_mci_set_ios:  no card. [mmc2]
[    4.520577] 1390..dw_mci_set_ios:  no card. [mmc2]
[    4.540294] 1390..dw_mci_set_ios:  no card. [mmc2]
[    4.540308] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    4.540321] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    4.540695] leds-gpio leds.37: pins are not configured from the driver
[    4.541050] hidraw: raw HID events driver (C) Jiri Kosina
[    4.543666] usbcore: registered new interface driver usbhid
[    4.543675] usbhid: USB HID core driver
[    4.544130] zram: Created 1 device(s) ...
[    4.544659] ashmem: initialized
[    4.544858] logger: created 256K log 'log_main'
[    4.545027] logger: created 256K log 'log_events'
[    4.545186] logger: created 256K log 'log_radio'
[    4.545348] logger: created 256K log 'log_system'
[    4.547023] input: rk29-keypad as /devices/ff100000.adc/key.39/input/input2
[    4.614154] es8323 probe i2c recv ok
[    4.617770] i2c-core: driver [ES8323] using legacy suspend method
[    4.623778] i2c-core: driver [ES8323] using legacy resume method
[    4.630770] rockchip-hdmi-spdif rockchip-hdmi-spdif.32: ASoC: CPU DAI (null) not registered
[    4.639137] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    4.645652] platform rockchip-hdmi-spdif.32: Driver rockchip-hdmi-spdif requests probe deferral
[    4.654575] es8323_probe
[    5.289468] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
[    5.297353] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
[    5.305253] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
[    5.313637] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
[    5.321514] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
[    5.330047] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
[    5.338228] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
[    5.346019] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
[    5.353890] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
[    5.361758] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
[    5.369629] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
[    5.378003] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
[    5.386359] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
[    5.394297] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
[    5.401946] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
[    5.409579] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
[    5.417224] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
[    5.425606] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
[    5.434044] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
[    5.441772] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
[    5.449483] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
[    5.457183] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
[    5.464879] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
[    5.473351] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
[    5.481821] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
[    5.489782] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
[    5.497739] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
[    5.505700] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
[    5.513652] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
[    5.521606] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
[    5.529568] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
[    5.537522] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
[    5.545504] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
[    5.553198] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
[    5.560898] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
[    5.568601] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
[    5.576300] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
[    5.584426] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
[    5.592546] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
[    5.600328] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
[    5.608116] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
[    5.615898] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
[    5.623684] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
[    5.631974] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
[    5.640385] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
[    5.646308] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
[    5.652127] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
[    5.657951] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
[    5.663703] ES8323 2-0010: ASoC: mux Differential Mux has no paths
[    5.673043] rockchip-es8323 rockchip-es8323.34:  ES8323 HiFi <-> rockchip-i2s.0 mapping ok
[    5.681474] input: RK_ES8323 Headphone Jack as /devices/rockchip-es8323.34/sound/card0/input3
[    5.691139] rockchip-hdmi-i2s rockchip-hdmi-i2s.31:  rk-hdmi-i2s-hifi <-> rockchip-i2s.0 mapping ok
[    5.700346] u32 classifier
[    5.703021]     Actions configured
[    5.706366] Netfilter messages via NETLINK v0.30.
[    5.711026] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    5.717259] ctnetlink v0.93: registering with nfnetlink.
[    5.722561] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    5.729399] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    5.735330] xt_time: kernel timezone is -0000
[    5.739761] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.745179] arp_tables: (C) 2002 David S. Miller
[    5.749741] TCP: cubic registered
[    5.753004] Initializing XFRM netlink socket
[    5.757362] NET: Registered protocol family 10
[    5.762115] mip6: Mobile IPv6
[    5.765047] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.770444] sit: IPv6 over IPv4 tunneling driver
[    5.775232] NET: Registered protocol family 17
[    5.779610] NET: Registered protocol family 15
[    5.784022] Bridge firewalling registered
[    5.787963] Ebtables v2.0 registered
[    5.791603] Bluetooth: RFCOMM TTY layer initialized
[    5.796411] Bluetooth: RFCOMM socket layer initialized
[    5.801467] Bluetooth: RFCOMM ver 1.11
[    5.805150] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.810375] Bluetooth: BNEP filters: protocol multicast
[    5.815509] Bluetooth: BNEP socket layer initialized
[    5.820406] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    5.826234] Bluetooth: HIDP socket layer initialized
[    5.831130] l2tp_core: L2TP core driver, V2.0
[    5.835415] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    5.840126] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    5.844888] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    5.849606] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[    5.856445] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    5.863457] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    5.871834] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    5.879113] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[    5.888093] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    5.897151] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    5.902301] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[    5.910621] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    5.915275] [BT_RFKILL]: Enter rfkill_rk_init
[    5.919689] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[    5.927737] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
[    5.935688] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[    5.943646] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[    5.951515] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[    5.959753] [BT_RFKILL]: Request irq for bt wakeup host
[    5.964950] [BT_RFKILL]: ** disable irq
[    5.968786] [BT_RFKILL]: ap6335 device registered.
[    5.974262] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
[    5.980827] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    5.988379] rk3288_init_suspend
[    5.991466] rk3288_suspend_init enter
[    5.995165] rk3288_suspend_init: pm_ctrbits =200007
[    5.999984] gpio_get_dts_info suspend:4
[    6.003752] gpio_get_dts_info resume:4
[    6.007438] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    6.015516] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    6.023541] clks_gating_suspend_init:clkgt info ok
[    6.028330] Registering SWP/SWPB emulation handler
[    6.033324] ddrfreq: verion 1.2 20140526
[    6.037190] ddrfreq: normal 396MHz video_1080p 240MHz video_4k 396MHz dualview 396MHz idle 0MHz suspend 200MHz reboot 396MHz
[    6.048217] ddrfreq: auto-freq=0
[    6.051398] ddrfreq: auto-freq-table[0] 240MHz
[    6.055767] ddrfreq: auto-freq-table[1] 324MHz
[    6.060130] ddrfreq: auto-freq-table[2] 396MHz
[    6.064493] ddrfreq: auto-freq-table[3] 528MHz
[    6.070120] regulator-dummy: disabling
[    6.074132] rockchip-hdmi-spdif rockchip-hdmi-spdif.32: ASoC: CPU DAI (null) not registered
[    6.082364] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    6.088887] platform rockchip-hdmi-spdif.32: Driver rockchip-hdmi-spdif requests probe deferral
[    6.097524] pcd_pullup, is_on 0
[    6.100640] file system registered
[    6.104477] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    6.111247] android_usb gadget: Number of LUNs=2
[    6.115808]  lun0: LUN: removable file: (no medium)
[    6.120609]  lun1: LUN: removable file: (no medium)
[    6.125516] android_usb gadget: android_usb ready
[    6.130658] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:00:02 UTC (1293883202)
[    6.143527] rk_spdif:rk_spdif_init
[    6.147054] rk_spdif:Entered spdif_probe
[    6.151097] rk_spdif:spdif:spdif probe ok!
[    6.155612] usbcore: registered new interface driver snd-usb-audio
[    6.161705] ALSA device list:
[    6.164666]   #0: RK_ES8323
[    6.164770] rockchip-hdmi-spdif rockchip-hdmi-spdif.32:  rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
[    6.176826]   #1: RK-HDMI-I2S
[    6.179741]   #2: RK-HDMI-SPDIF
[    6.183149] Freeing unused kernel memory: 592K (c0ae3000 - c0b77000)
[    6.193810] SELinux:  Permission attach_queue in class tun_socket not defined in policy.
[    6.201764] SELinux: the above unknown classes and permissions will be denied
[    6.531686] type=1403 audit(1293883202.900:2): policy loaded auid=4294967295 ses=4294967295
[    6.540035] SELinux: Loaded policy from /sepolicy
[    6.546570] type=1404 audit(1293883202.910:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    7.535636] init: could not import file '/init.usbstorage.rc' from '/init.rc'
[    7.543064] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    7.601952] init: /dev/hw_random not found
[    7.606028] keychord: using input dev ff680000.pwm for fevent
[    7.611736] keychord: using input dev rk29-keypad for fevent
[    7.622369] fs_mgr: parse_link_device : path = NULL
[    7.627185] fs_mgr: parse_link_device : path = NULL
[    7.632020] fs_mgr: parse_link_device : path = NULL
[    7.636877] fs_mgr: ---------------resize_fs blk_dev /dev/block/platform/ff0f0000.rksdmmc/by-name/system, type ext4fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[    7.655456] resize2fs: resize2fs 1.41.14 (22-Dec-2010)resize2fs: The filesystem is already 196608 blocks long.  Nothing to do!resize2fs:
[    7.673742] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[    7.693243] EXT4-fs (mmcblk0p8): recovery complete
[    7.698725] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    7.716915] EXT4-fs (mmcblk0p11): recovery complete
[    7.721740] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    7.892205] EXT4-fs (mmcblk0p12): 2 orphan inodes deleted
[    7.897537] EXT4-fs (mmcblk0p12): recovery complete
[    7.924736] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    7.950549] mali pd enabled
[    7.953305] clk enabled
[    7.956908] MALI_DVFS_STEP=5,div_dvfs=7
[    7.960681] mali_dvfs_infotbl[0].clock=99000,min_threshold=0,max_threshold=70
[    7.967720] mali_dvfs_infotbl[1].clock=179000,min_threshold=66,max_threshold=77
[    7.974923] mali_dvfs_infotbl[2].clock=297000,min_threshold=73,max_threshold=84
[    7.982105] mali_dvfs_infotbl[3].clock=417000,min_threshold=82,max_threshold=91
[    7.989310] mali_dvfs_infotbl[4].clock=480000,min_threshold=94,max_threshold=100
[    7.996678] gpufreq_input_connect
[    7.999939] turn on mali power
[    8.002940] kbase_platform_rk_init,register_reboot_notifier
[    8.008450] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
[    8.015257] mali ffa30000.gpu: Probed as mali0
[    8.022263] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[    8.043395] init: /dev/hw_random not found
[    8.055468] binder: 162:162 transaction failed 29189, size 0-0
[    8.056905] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
[    8.059393] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
[    8.065226] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recvery'
[    8.066593] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
[    8.067599] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    8.067613] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    8.067800] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[    8.220839] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[    8.228905] init: powerctl: cannot expand '${sys.powerctl}'
[    8.234485] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[    8.245363] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[    8.255668] init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
[    8.266500] init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
[    8.278587] android_usb: already disabled
[    8.284551] read descriptors
[    8.287395] read strings
[    8.289951] pcd_pullup, is_on 1
[    8.375842] fs_mgr: parse_link_device : path = NULL
[    8.380716] fs_mgr: parse_link_device : path = NULL
[    8.385559] fs_mgr: parse_link_device : path = NULL
shell@rk3288:/ $ [    9.100524] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.107910] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.115266] D1:camsys_open(717): camsys_marvin(ed69e110) is opened!
[    9.121562] rockchip_gpio_request:GPIO7-13
[    9.125600] rockchip_gpio_set:GPIO7-13 level = 1
[    9.130172] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    9.136037] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[    9.142714] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7408,result=0x7408
[    9.153246] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    9.160053] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000  dev_name: OV8825) register success
[    9.182290] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.190272] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.195317] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.200228] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.209551] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.217921] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.226201] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.236679] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[    9.243023] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.250267] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.257529] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.301384] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[    9.308058] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[    9.316903] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x2000000) is deregister success
[    9.325361] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[    9.333603] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.341059] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.348571] D1:camsys_release(741): camsys_marvin(ed69e110) is closed
[    9.361788] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.369175] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.376553] D1:camsys_open(717): camsys_marvin(ed69e110) is opened!
[    9.382806] rockchip_gpio_set:GPIO7-13 level = 1
[    9.387345] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    9.393223] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[    9.399898] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7408,result=0x7408
[    9.410429] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    9.417217] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000  dev_name: OV8858) register success
[    9.440265] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.448245] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.453246] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.458155] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.467448] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.475788] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.484054] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.494495] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[    9.502006] E:camsys_i2c_write(77): i2c write dev(addr:0x20) failed!
[    9.508316] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.515536] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.522801] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.559337] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[    9.565957] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[    9.574787] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x2000000) is deregister success
[    9.583220] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[    9.591473] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.598954] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.606397] D1:camsys_release(741): camsys_marvin(ed69e110) is closed
[    9.620270] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.627640] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.634995] D1:camsys_open(717): camsys_marvin(ed69e110) is opened!
[    9.641230] D1:camsys_extdev_register(230): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
[    9.651173] D1:camsys_extdev_register(230): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[    9.661115] D1:camsys_extdev_register(230): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
[    9.671076] rockchip_gpio_set:GPIO7-13 level = 1
[    9.675615] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    9.681459] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[    9.688173] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7408,result=0x7408
[    9.698743] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    9.705532] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[    9.737837] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.745810] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.750790] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.755739] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.765020] D1:camsys_sysctl_extdev(335): Sysctl 11 success, gpio(11) set 1
[    9.772944] D1:camsys_sysctl_extdev(339): Sysctl 8 success, gpio(79) set 1
[    9.780797] D1:camsys_sysctl_extdev(339): Sysctl 7 success, gpio(78) set 1
[    9.790821] E:camsys_i2c_write(77): i2c write dev(addr:0x20) failed!
[    9.798327] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[    9.804673] D1:camsys_sysctl_extdev(335): Sysctl 7 success, gpio(78) set 0
[    9.811456] D1:camsys_sysctl_extdev(335): Sysctl 8 success, gpio(79) set 0
[    9.818302] D1:camsys_sysctl_extdev(339): Sysctl 11 success, gpio(11) set 0
[    9.856945] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[    9.863567] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[    9.872418] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x2000000) is deregister success
[    9.880836] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[    9.889066] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.896543] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.904005] D1:camsys_release(741): camsys_marvin(ed69e110) is closed
[    9.917566] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.924977] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.932336] D1:camsys_open(717): camsys_marvin(ed69e110) is opened!
[    9.938573] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[    9.945548] D1:camsys_extdev_register(255): Extdev(dev_id: 0x1000000  dev_name: OV2659) register success
[    9.954893] rk3288-lcdc lcdc0: blank mode:0
[    9.976009] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.983999] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.988982] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.993921] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[   10.003209] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[   10.011535] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[   10.019778] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[   10.030257] E:camsys_i2c_write(77): i2c write dev(addr:0x60) failed!
[   10.036623] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[   10.039776] init: sys_prop: permission denied uid:1003  name:sys.gmali.version
[   10.051029] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[   10.058259] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[   10.075240] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[   10.081939] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[   10.090779] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x1000000) is deregister success
[   10.099189] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[   10.107435] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[   10.114936] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[   10.122400] D1:camsys_release(741): camsys_marvin(ed69e110) is closed
[   11.195626] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[   17.284760] healthd: battery l=50 v=3 t=2.6 h=2 st=3 chg=au
[   17.387119] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[   17.394169] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[   17.399474] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[   17.404875] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[   17.410350] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[   17.415840] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[   17.421323] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[   17.655430] phy_power_on: enable = 1
[   17.698449] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[   17.704776] eth0: device MAC address e2:44:e3:8a:72:3d
[   17.713996] libphy: stmmac: probed
[   17.717370] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
[   17.723358] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active
[   17.837150] wifi_driver_write: wifi driver already rmmod
[   17.892787] acc_open
[   17.894970] acc_release
[   18.829714] FAT-fs (mmcblk0p14): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   19.104583] avc:  denied  { set } for property=sys.vold.hasAsec scontext=u:r:vold:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service
[   19.117275] init: sys_prop: permission denied uid:0  name:sys.vold.hasAsec
[   19.124399] init: no such service 'fuse_internal_sd'
[   19.454710] init: sys_prop: permission denied uid:10012  name:sys.gmali.version
[   19.752384] init: sys_prop: permission denied uid:10037  name:sys.gmali.version
[   20.638754] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
[   20.737134] f28c7234,f28c7234,f28c7234
[   32.868553] rk3288-hdmi ff980000.hdmi: Removed.
[   33.083027] rk3288-lcdc lcdc0: blank mode:4
[   33.680094] PM: suspend entry 2011-01-01 12:00:30.497389596 UTC
[   33.686067] PM: Syncing filesystems ... done.
[   33.705471] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   33.717001] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   33.727691] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDDR Version 1.00 20141007
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT


U-Boot 2014.10-RK3288-01 (Nov 27 2014 - 16:44:27)

CPU: rk3288
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks:1
Adding bank:0000000000000000(0000000080000000)
128 MiB
storage init OK!
Using default environment

GetParam
check parameter success
Unknow param: MACHINE_MODEL:rk30sdk!
Unknow param: MACHINE_ID:007!
Unknow param: MANUFACTURER:RK30SDK!
Unknow param: PWR_HLD: 0,0,A,0,1!
power key: bank-0 pin-5
pmic:act8846
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2014-11-27#2.19
empty serial no.
checkKey
vbus = 0
no fuel gauge found
no fuel gauge found
read logo_on switch from dts [0]
no fuel gauge found
Hit any key to stop autoboot:  0
kernel   @ 0x02000000 (0x00653548)
ramdisk  @ 0x04bf0000 (0x00122fc0)
Secure Boot state: 0
bootrk: do_bootm_linux...
   Loading Device Tree to 0480c000, end 0482a935 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (firefly@tchip-server) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #12 SMP PREEMPT Wed Apr 22 11:14:57 CST 2015
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] rockchip_ion_reserve
[    0.000000] ion heap(cma): base(40000000) size(28000000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 640 MiB at 40000000
[    0.000000] ion_reserve: cma reserved base 40000000 size 671088640
[    0.000000] cma: CMA: reserved 16 MiB at 2e800000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1ddc000 s14016 r8192 d14656 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 522768
[    0.000000] Kernel command line: console=ttyS2 earlyprintk androidboot.hardware=rk30board androidboot.console=ttyS2 board.ap_has_alsa=0 init=/init  mtdparts=rk29xxnand:0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00180000@0x00092000(system),0x00002000@0x00212000(metadata),0x00200000@0x00214000(userdata),0x00020000@0x00414000(radical_update),-@0x00434000(user) storagemedia=emmc loader.timestamp=2014-11-27_16:44:27
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 1388480k/1388480k available, 708672k reserved, 663552K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0ae28fc   (11115 kB)
[    0.000000]       .init : 0xc0ae3000 - 0xc0b776c0   ( 594 kB)
[    0.000000]       .data : 0xc0b78000 - 0xc0c7f438   (1054 kB)
[    0.000000]        .bss : 0xc0c7f438 - 0xc0d9d7c4   (1145 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start! cru base = 0xfed00000
[    0.000000] rk_get_uboot_display_flag: uboot_logo_on = 0
[    0.000000] rkclk_init_clks: cnt_parent = 7
[    0.000000] rkclk_init_clks: cnt_rate = 31
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] process version: 3
[    0.000000] channel:0, lkg:33
[    0.000000] target-temp:80
[    0.000000] channel:2, lkg:0
[    0.000000] target-temp:80
[    0.000000] channel:0, lkg:33
[    0.000000] target-temp:80
[    0.000000] channel:1, lkg:32
[    0.000000] target-temp:80
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.305766] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.305782] pid_max: default: 32768 minimum: 301
[    0.305888] Security Framework initialized
[    0.305905] SELinux:  Initializing.
[    0.305976] Mount-cache hash table entries: 512
[    0.306616] Initializing cgroup subsys debug
[    0.306629] Initializing cgroup subsys memory
[    0.306656] Initializing cgroup subsys freezer
[    0.306686] CPU: Testing write buffer coherency: ok
[    0.306994] /cpus/cpu@0 missing clock-frequency property
[    0.307006] /cpus/cpu@1 missing clock-frequency property
[    0.307015] /cpus/cpu@2 missing clock-frequency property
[    0.307024] /cpus/cpu@3 missing clock-frequency property
[    0.307087] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.307137] Setting up static identity map for 0xc07e2690 - 0xc07e26e8
[    0.310211] last_log: 0x2e100000 map to 0xf0004000 and copy to 0xf0086000, size 0x80000 early 0x1661 (version 3.0)
[    0.383822] CPU1: Booted secondary processor
[    0.383854] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.403509] CPU2: Booted secondary processor
[    0.403532] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.423221] CPU3: Booted secondary processor
[    0.423244] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.423345] Brought up 4 CPUs
[    0.423373] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.423382] CPU: All CPU(s) started in SVC mode.
[    0.424103] devtmpfs: initialized
[    0.429013] pinctrl core: initialized pinctrl subsystem
[    0.429263] regulator-dummy: no parameters
[    0.440680] NET: Registered protocol family 16
[    0.442455] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.442774] ion_snapshot: 0x2e1b0000 map to 0xf0107000 and copy to 0xc0d78dc4 (version 0.1)
[    0.443100] Registered FIQ tty driver
[    0.443513] fiq-debugger is disabled in device tree
[    0.444093] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[    0.444115] rockchip_get_bank_data:name=mux_bank0 start=0xff730084,end=0xff73008f
[    0.444131] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[    0.444147] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[    0.444237] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[    0.444300] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[    0.444360] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[    0.444419] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[    0.444479] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[    0.444538] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio6@ff7d0000 start=0xff7d0000,end=0xff7d00ff
[    0.444598] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[    0.444657] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[    0.444723] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[    0.444785] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[    0.444798] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[    0.444809] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[    0.444821] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[    0.445324] rockchip_interrupts_register:bank_num=7
[    0.447251] rockchip_pinctrl_probe:init ok
[    0.453350] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.453438] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453452] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.453612] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.453684] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453696] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.453856] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.453926] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.453938] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.454091] rk_iommu ff940300.vopl_mmu: (vopl) Enter
[    0.454159] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.454171] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.454341] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.454413] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.454425] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.454581] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.454650] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.454663] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.454831] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.454901] IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.454913] rk_iommu ff914000.isp_mmu: (isp_mmu) Initialized
[    0.456809] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.456822] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.457021] DDR DEBUG: version 1.00 20140603
[    0.457051] DDR DEBUG: Channel a:
[    0.457060] DDR DEBUG: DDR3 Device
[    0.457073] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.457081] DDR DEBUG: Channel b:
[    0.457088] DDR DEBUG: DDR3 Device
[    0.457100] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.457109] DDR DEBUG: addr=0xc87000
[    0.457118] DDR DEBUG: stride=9, size=256, halfcap=40000000
[    0.457127] DDR DEBUG: socAddr[0]=0xc87000, socAddr[1]=0xc87100
[    0.457136] DDR DEBUG: chAddr[0]=0xc87000, chAddr[1]=0xc87000
[    0.457147] DDR DEBUG: dtar[0]=0x70190000, dtar[1]=0x70190000
[    0.457390] DDR DEBUG: init success!!! freq=300MHz
[    0.457397] DDR DEBUG: Channel a:
[    0.457409] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=3,0, DGSL=1,1 extra clock, DGPS=360,360
[    0.457422] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.457434] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=3,0, DGSL=1,1 extra clock, DGPS=360,360
[    0.457446] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.457457] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.457466] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.457475] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.457482] DDR DEBUG: Channel b:
[    0.457493] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.457505] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.457517] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.457528] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=270,270
[    0.457539] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.457548] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.457556] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.479442] bio: create slab <bio-0> at 0
[    0.480256] SCSI subsystem initialized
[    0.480401] usbcore: registered new interface driver usbfs
[    0.480442] usbcore: registered new interface driver hub
[    0.480519] usbcore: registered new device driver usb
[    0.481890] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.483998] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.485609] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.486545] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[    0.486787] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.487270] media: Linux media interface: v0.10
[    0.487309] Linux video capture interface: v2.00
[    0.487355] pps_core: LinuxPPS API ver. 1 registered
[    0.487363] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.487383] PTP clock support registered
[    0.487879] Rockchip ion module is successfully loaded (v1.0)
[    0.488038] Advanced Linux Sound Architecture Driver Initialized.
[    0.488399] Bluetooth: Core ver 2.16
[    0.488439] NET: Registered protocol family 31
[    0.488449] Bluetooth: HCI device and connection manager initialized
[    0.488463] Bluetooth: HCI socket layer initialized
[    0.488475] Bluetooth: L2CAP socket layer initialized
[    0.488499] Bluetooth: SCO socket layer initialized
[    0.488707] cfg80211: Calling CRDA to update world regulatory domain
[    0.489941] act8846_i2c_probe,line=898
[    0.490893] act8846_parse_dt,line=746
[    0.491620] act8846_i2c_probe: act8846_pmic_hold=1
[    0.491639] act8846_i2c_probe: act8846_pmic_sleep=1
[    0.491653] act8846_i2c_probe: act8846_pmic_cpu_det_gpio=1
[    0.491668] act8846_i2c_probe: act8846_pmic_usb_hub_reset_gpio=1
[    0.493482] act_dcdc1: 1200 mV
[    0.496209] vccio: 3300 mV
[    0.498052] vdd_logic: 700 <--> 1500 mV at 1100 mV
[    0.500750] act_dcdc4: 2000 mV
[    0.501975] vccio_sd: 1800 <--> 3300 mV at 3300 mV
[    0.504042] act_ldo2: 1000 mV
[    0.506122] act_ldo3: 2800 mV
[    0.508195] act_ldo4: 3300 mV
[    0.510253] act_ldo5: 3300 mV
[    0.512315] act_ldo6: 1000 mV
[    0.514388] vcc_18: 1800 mV
[    0.516446] act_ldo8: 1800 mV
[    0.521202] vdd_arm: 712 <--> 1500 mV at 1000 mV
[    0.525910] vdd_gpu: 712 <--> 1500 mV at 1000 mV
[    0.526681] Switching to clocksource arch_sys_counter
[    0.546776] rk-fb rockchip-fb: rk fb ion client create success!
[    0.546789] rk-fb rockchip-fb: rockchip framebuffer driver probe
[    0.547179] rk-screen rk_screen.8: rockchip screen probe success
[    0.547338] rk32-lvds ff96c000.lvds: screen is not lvds/rgb!
[    0.547357] rk32-lvds: probe of ff96c000.lvds failed with error -22
[    0.547690] rk32-edp ff970000.edp: screen is not edp!
[    0.547705] rk32-edp: probe of ff970000.edp failed with error -22
[    0.547854] rk32-dsi
[    0.547993] dsi->host.irq =51
[    0.548010] load mipi dsi chip:rk_mipi_dsi.0 id:3133302a
[    0.548018] mipi_dsi v1.3 2014-04-17
[    0.548042] rk32-mipi ff960000.mipi: rk mipi_dsi probe success!
[    0.548054] rk32-mipi ff960000.mipi: rockchip mipi_dsi v1.1 2014-06-17
[    0.548554] rk3288-lcdc lcdc0: request lcd_rst gpio fail:-16
[    0.548787] graphics fb0: rockchip framebuffer registerd:fb0
[    0.549090] graphics fb1: rockchip framebuffer registerd:fb1
[    0.549241] graphics fb2: rockchip framebuffer registerd:fb2
[    0.549392] graphics fb3: rockchip framebuffer registerd:fb3
[    0.560459] rk3288-lcdc lcdc0: lcdc0: dclk:120000000>>fps:50
[    0.560473] dsi->phy.sys_clk =24000000
[    1.058102] rk3288-lcdc lcdc0: wakeup from standby!
[    1.083191] alloc_buffer:ion_phy_addr=0x40000000
[    1.095552] fb0:phy:40000000>>vir:f0171000>>len:0x1900000
[    1.099080] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu disabled
[    1.099240] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[    1.099252] rk_fb_trsm_ops_get:un supported transmitter:0!
[    1.099478] graphics fb4: rockchip framebuffer registerd:fb4
[    1.099778] graphics fb5: rockchip framebuffer registerd:fb5
[    1.099932] graphics fb6: rockchip framebuffer registerd:fb6
[    1.100088] graphics fb7: rockchip framebuffer registerd:fb7
[    1.147400] alloc_buffer:ion_phy_addr=0x41900000
[    1.147416] fb0:phy:41900000>>vir:  (null)>>len:0x3000000
[    1.147431] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu disabled
[    1.148090] rockchip_set_mux:warning ignore bank num 15
[    1.148212] rockchip_set_mux:warning ignore bank num 15
[    1.148316] rockchip_set_mux:warning ignore bank num 15
[    1.148429] rockchip_set_mux:warning ignore bank num 15
[    1.148530] rockchip_set_mux:warning ignore bank num 15
[    1.148636] rockchip_set_mux:warning ignore bank num 15
[    1.149214] rockchip_set_mux:warning ignore bank num 15
[    1.149358] rockchip_set_mux:warning ignore bank num 15
[    1.149892] rockchip_set_mux:warning ignore bank num 15
[    1.150025] rockchip_set_mux:warning ignore bank num 15
[    1.150559] rockchip_set_mux:warning ignore bank num 15
[    1.150694] rockchip_set_mux:warning ignore bank num 15
[    1.151221] rockchip_set_mux:warning ignore bank num 15
[    1.151364] rockchip_set_mux:warning ignore bank num 15
[    1.152727] NET: Registered protocol family 2
[    1.153169] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.153299] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.153432] TCP: Hash tables configured (established 8192 bind 8192)
[    1.153479] TCP: reno registered
[    1.153492] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.153526] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.153723] NET: Registered protocol family 1
[    1.153912] Unpacking initramfs...
[    1.216210] Freeing initrd memory: 1160K (c4bf0000 - c4d12000)
[    1.216793] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    1.217291] probe device ff9a0000.vpu_service
[    1.217463] vpu_service: power on
[    1.218519] checking hw id 4831
[    1.218878] vpu_service set to auto frequency mode
[    1.218911] vpu_service: power off...
[    1.218946] done
[    1.218953] init success
[    1.219001] probe device ff9c0000.hevc_service
[    1.219190] hevc_service: power on
[    1.220224] checking hw id 6867
[    1.220446] hevc_service: power off...
[    1.220482] done
[    1.220489] init success
[    1.220598] rknandbase v1.0 2014-03-31
[    1.220690] rknand ff400000.nandc0: no irq resource?
[    1.220813] rknand_driver:ret = 0
[    1.222409] audit: initializing netlink socket (disabled)
[    1.222446] type=2000 audit(0.920:1): initialized
[    1.223190] bounce pool size: 64 pages
[    1.227572] fuse init (API version 7.22)
[    1.227923] msgmni has been set to 1450
[    1.229619] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    1.229634] io scheduler noop registered
[    1.229643] io scheduler deadline registered
[    1.229728] io scheduler cfq registered (default)
[    1.233256] rga2 ff920000.rga: rga ion client create success!
[    1.233385] rga: Driver loaded succesfully
[    1.233989] IEP Driver loaded succesfully
[    1.234098] Module initialized.
[    1.234947] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.234963] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    1.236280] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.236296] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.236566] pwm-voltage-regulator pwm_regulator.28: unable to request PWM, trying legacy API
[    1.236581] pwm-voltage-regulator pwm_regulator.28: unable to request legacy PWM
[    1.236590] pwm_regulator_probe:error
[    1.236610] platform pwm_regulator.28: Driver pwm-voltage-regulator requests probe deferral
[    1.236952] rk_serial.c v1.8 2014-03-04
[    1.237153] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    1.237340] serial ff180000.serial: membase f1a74000
[    1.237468] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2
[    2.915418] console [ttyS2] enabled
[    2.919044] serial ff690000.serial: membase fed60000
[    2.926544] loop: module loaded
[    2.930201] SCSI Media Changer driver v0.25
[    2.934710] tun: Universal TUN/TAP device driver, 1.6
[    2.939711] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    2.945896] vmac_init.
[    2.948741] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    2.955416] stmmac_probe_config_dt: Can not read property: pmu_enable_level.
[    2.962374] stmmac_probe_config_dt: clock input or output? (input).
[    2.968547] stmmac_probe_config_dt: TX delay(0x30).
[    2.973343] stmmac_probe_config_dt: RX delay(0x20).
[    2.978184] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    2.983502] stmmc_pltfr_init:
[    2.986697] stmmc_pltfr_init: init for RGMII
[    2.990906] tx delay=0x30
[    2.990906] rx delay=0x20
[    2.996471] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    3.001463]  Normal descriptors
[    3.004553]  Ring mode enabled
[    3.007568]  DMA HW capability register supported
[    3.012024]  RX Checksum Offload Engine supported (type 2)
[    3.017604]  TX Checksum insertion supported
[    3.021811]  Wake-Up On Lan supported
[    3.025437]  Enable RX Mitigation via HW Watchdog Timer
[    3.030988] PPP generic driver version 2.4.2
[    3.035330] PPP BSD Compression module registered
[    3.039985] PPP Deflate Compression module registered
[    3.044962] PPP MPPE Compression module registered
[    3.049685] NET: Registered protocol family 24
[    3.054074] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    3.063582] CSLIP: code copyright 1989 Regents of the University of California.
[    3.070776] Rockchip WiFi SYS interface (V1.00) ...
[    3.075688] esp_mem_init enter date Dec 26 2014 09:48:50
[    3.080951] esp_mem_init complete
[    3.084356] usbcore: registered new interface driver catc
[    3.089706] usbcore: registered new interface driver kaweth
[    3.095196] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    3.102506] usbcore: registered new interface driver pegasus
[    3.108131] usbcore: registered new interface driver rtl8150
[    3.113723] usbcore: registered new interface driver r8152
[    3.119139] hso: drivers/net/usb/hso.c: Option Wireless
[    3.124332] usbcore: registered new interface driver hso
[    3.129603] usbcore: registered new interface driver asix
[    3.134950] usbcore: registered new interface driver ax88179_178a
[    3.140981] usbcore: registered new interface driver cdc_ether
[    3.146761] usbcore: registered new interface driver cdc_eem
[    3.152351] usbcore: registered new interface driver dm9601
[    3.157879] usbcore: registered new interface driver dm9620
[    3.163394] usbcore: registered new interface driver smsc75xx
[    3.169091] usbcore: registered new interface driver smsc95xx
[    3.174779] usbcore: registered new interface driver gl620a
[    3.180304] usbcore: registered new interface driver net1080
[    3.185908] usbcore: registered new interface driver plusb
[    3.191329] usbcore: registered new interface driver rndis_host
[    3.197199] usbcore: registered new interface driver cdc_subset
[    3.203046] usbcore: registered new interface driver zaurus
[    3.208566] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    3.215894] usbcore: registered new interface driver int51x1
[    3.221500] usbcore: registered new interface driver kalmia
[    3.227024] usbcore: registered new interface driver ipheth
[    3.232532] usbcore: registered new interface driver sierra_net
[    3.238406] usbcore: registered new interface driver cx82310_eth
[    3.244360] usbcore: registered new interface driver cdc_ncm
[    3.249953] usbcore: registered new interface driver qmi_wwan
[    3.255643] usbcore: registered new interface driver cdc_mbim
[    3.261303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.270103] ehci_rk_probe f1b00000 f1b00010
[    3.274239] rockchip_ehci_host ff500000.usb: Rockchip On-Chip EHCI Host Controller
[    3.281711] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    3.290120] rockchip_ehci_host ff500000.usb: irq 56, io mem 0xff500000
[    3.311470] rockchip_ehci_host ff500000.usb: USB 0.0 started, EHCI 1.00
[    3.318052] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.324785] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.331901] usb usb1: Product: Rockchip On-Chip EHCI Host Controller
[    3.338150] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    3.343467] usb usb1: SerialNumber: ff500000.usb
[    3.348421] hub 1-0:1.0: USB hub found
[    3.352137] hub 1-0:1.0: 1 port detected
[    3.380339] ehci_rk_probe ok
[    3.383312] usbcore: registered new interface driver cdc_acm
[    3.388875] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    3.396802] usbcore: registered new interface driver usblp
[    3.402241] usbcore: registered new interface driver cdc_wdm
[    3.407851] usbcore: registered new interface driver usb-storage
[    3.413797] usbcore: registered new interface driver ums-alauda
[    3.419642] usbcore: registered new interface driver ums-cypress
[    3.425586] usbcore: registered new interface driver ums-datafab
[    3.431528] usbcore: registered new interface driver ums_eneub6250
[    3.437628] usbcore: registered new interface driver ums-freecom
[    3.443576] usbcore: registered new interface driver ums-isd200
[    3.449479] usbcore: registered new interface driver ums-jumpshot
[    3.455497] usbcore: registered new interface driver ums-karma
[    3.461273] usbcore: registered new interface driver ums-onetouch
[    3.467290] usbcore: registered new interface driver ums-sddr09
[    3.473148] usbcore: registered new interface driver ums-sddr55
[    3.479006] usbcore: registered new interface driver ums-usbat
[    3.484812] usbcore: registered new interface driver usbserial
[    3.490595] usbcore: registered new interface driver usbserial_generic
[    3.497031] usbserial: USB Serial support registered for generic
[    3.502976] usbcore: registered new interface driver option
[    3.508484] usbserial: USB Serial support registered for GSM modem (1-port)
[    3.515385] usbcore: registered new interface driver trancevibrator
[    3.521558] usb20_otg: version 3.10a 21-DEC-2012
[    3.526480] f1b80040
[    3.528652] Core Release: 3.10a
[    3.531744] Setting default values for core params
[    3.536559] Using Buffer DMA mode
[    3.539835] Periodic Transfer Interrupt Enhancement - disabled
[    3.545568] Multiprocessor Interrupt Enhancement - disabled
[    3.551055] OTG VER PARAM: 0, OTG VER FLAG: 0
[    3.555338] ^^^^^^^^^^^^^^^^^Device Mode
[    3.559205] Dedicated Tx FIFOs mode
[    3.562642] pcd_init otg_dev = ed64c980
[    3.566543] usb20_otg ff580000.usb: DWC OTG Controller
[    3.571624] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    3.579016] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    3.584706] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    3.591394] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.598504] usb usb2: Product: DWC OTG Controller
[    3.603131] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    3.608703] usb usb2: SerialNumber: ff580000.usb
[    3.613602] hub 2-0:1.0: USB hub found
[    3.617317] hub 2-0:1.0: 1 port detected
[    3.621465] usb20_host: version 3.10a 21-DEC-2012
[    3.628555] f1c00040
[    3.630709] Core Release: 3.10a
[    3.633798] Setting default values for core params
[    3.638604] Using Buffer DMA mode
[    3.641866] Periodic Transfer Interrupt Enhancement - disabled
[    3.647610] Multiprocessor Interrupt Enhancement - disabled
[    3.653088] OTG VER PARAM: 0, OTG VER FLAG: 0
[    3.657379] ^^^^^^^^^^^^^^^^^^Host Mode
[    3.661168] usb20_host ff540000.usb: DWC OTG Controller
[    3.666333] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    3.673796] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    3.679620] Init: Power Port (0)
[    3.682840] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    3.689527] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.696635] usb usb3: Product: DWC OTG Controller
[    3.701261] usb usb3: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    3.706834] usb usb3: SerialNumber: ff540000.usb
[    3.711717] hub 3-0:1.0: USB hub found
[    3.715467] hub 3-0:1.0: 1 port detected
[    3.719870] .. rk pwm remotectl v1.0 init
[    3.723884] remotectl probe j=0x0
[    3.727298] input: ff680000.pwm as /devices/ff680000.pwm/input/input0
[    3.733800] pwm enable val=0x646205
[    3.737588] usbcore: registered new interface driver xpad
[    3.742938] usbcore: registered new interface driver usb_acecad
[    3.748810] usbcore: registered new interface driver aiptek
[    3.754336] usbcore: registered new interface driver gtco
[    3.759682] usbcore: registered new interface driver hanwang
[    3.765292] usbcore: registered new interface driver kbtab
[    3.770724] usbcore: registered new interface driver wacom
[    3.797091] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 1
[    3.833911] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 2
[    3.863431] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 3
[    3.892948] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 4
[    3.922470] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 5
[    3.951988] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 6
[    3.981509] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 7
[    4.011025] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 8
[    4.040549] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 9
[    4.070071] synaptics_dsx_i2c 1-0020: synaptics_rmi4_i2c_set_page: I2C retry 10
[    4.098663] synaptics_dsx_i2c 1-0020: synaptics_rmi4_set_input_dev: Failed to query device
[    4.106794] synaptics_dsx synaptics_dsx.0: synaptics_rmi4_probe: Failed to set up input device
[    4.115291] synaptics_dsx: probe of synaptics_dsx.0 failed with error -5
[    4.126814] rtc_hym8563 0-0051: rtc core: registered hym8563 as rtc0
[    4.133142] i2c /dev entries driver
[    4.137230] IR NEC protocol handler initialized
[    4.141702] IR RC5(x) protocol handler initialized
[    4.146413] IR RC6 protocol handler initialized
[    4.150888] IR JVC protocol handler initialized
[    4.155341] IR Sony protocol handler initialized
[    4.159889] IR RC5 (streamzap) protocol handler initialized
[    4.165366] IR SANYO protocol handler initialized
[    4.170007] IR MCE Keyboard/mouse protocol handler initialized
[    4.175872] usbcore: registered new interface driver uvcvideo
[    4.181534] USB Video Class driver (1.1.1)
[    4.185564] CamSys driver version: v0.23.0,  CamSys head file version: v0.9.0
[    4.193953] D1:camsys_platform_probe(1067): 1-gpios-cifpower锛gpio=236
[    4.200570] D1:camsys_platform_probe(1070): gpios-cifpower锛gpio_request
[    4.207342] D1:camsys_platform_probe(1072): 1-gpios-cifpower锛gpio_request=0
[    4.214462] D1:camsys_platform_probe(1079): gpios-cifpower锛236 high
[    4.220960] D1:camsys_mipiphy_probe_cb(163): ff910000.isp mipi phy0 probe success(reg_phy: 0x0  reg_vir: 0x0  size: 0x0)
[    4.231790] D1:camsys_mipiphy_probe_cb(160): ff910000.isp mipi phy1 probe success(reg_phy: 0xff968000  reg_vir: 0xf1ab0000  size: 0x4000)
[    4.244536] D1:camsys_platform_probe(1183): ff910000.isp memory:
[    4.250476] D1:camsys_platform_probe(1193):     Register memory (phy: 0xff910000 vir: 0xf1ae0000 size: 0x10000)
[    4.260403] D1:camsys_platform_probe(1188):     I2c memory (phy: 0x2d68e000 vir: 0xed68e000 size: 0x1000)
[    4.269824] D1:camsys_platform_probe(1208): Probe ff910000.isp device success
[    4.278153] rockchip_temp_probe,line=362
[    4.334821] tsadc ff280000.tsadc: initialized
[    4.339486] device-mapper: uevent: version 1.0.3
[    4.344233] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    4.352802] Bluetooth: HCI UART driver ver 2.2
[    4.357189] Bluetooth: HCI H4 protocol initialized
[    4.361900] Bluetooth: HCILL protocol initialized
[    4.369605] cpufreq version 1.0, suspend freq 1200 MHz
[    4.374874] cpuidle: using governor ladder
[    4.378904] cpuidle: using governor menu
[    4.382785] Synopsys Designware Multimedia Card Interface Driver
[    4.388953] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    4.395089] dwmmc_rockchip ff0f0000.rksdmmc: Using internal DMA controller.
[    4.402082] 3379..dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[    4.408510] mmc0 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    4.414332] 1390..dw_mci_set_ios:  no card. [mmc0]
[    4.433217] 1390..dw_mci_set_ios:  no card. [mmc0]
[    4.452920] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    4.452928] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    4.452935] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    4.453125] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    4.483343] dwmmc_rockchip ff0c0000.rksdmmc: Using internal DMA controller.
[    4.490287] 3379..dw_mci_init_slot: fmin=400000, fmax=50000000 [mmc1]
[    4.496625] mmc1 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    4.502421] mmc1: no vmmc regulator found
[    4.506446] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[    4.513205] 1390..dw_mci_set_ios:  no card. [mmc1]
[    4.514555] mmc0: BKOPS_EN bit is not set
[    4.515818] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[    4.515835] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    4.515897] rk_sdmmc: BOOT Bus speed=50000000Hz,Bus width=8bits.[mmc0]
[    4.515990] mmc0: new high speed MMC card at address 0001
[    4.516242] mmcblk0: mmc0:0001 MAG2GA 14.5 GiB
[    4.516482]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    4.516488]       misc: 0x000800000 -- 0x000c00000 (4 MB)
[    4.516493]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    4.516498]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[    4.516503]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
[    4.516507]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[    4.516512]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
[    4.516517]      cache: 0x00a000000 -- 0x012000000 (128 MB)
[    4.516521]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
[    4.516526]     system: 0x012400000 -- 0x042400000 (768 MB)
[    4.516531]   metadata: 0x042400000 -- 0x042800000 (4 MB)
[    4.516535]   userdata: 0x042800000 -- 0x082800000 (1024 MB)
[    4.516540] radical_update: 0x082800000 -- 0x086800000 (64 MB)
[    4.516545]       user: 0x086800000 -- 0x3a3a00000 (12754 MB)
[    4.649693] 1390..dw_mci_set_ios:  no card. [mmc1]
[    4.669381]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p141390..dw_mci_set_ios:  no card. [mmc1]
[    4.669396] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    4.669401] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[    4.669624] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    4.700568] dwmmc_rockchip ff0d0000.rksdmmc: Using internal DMA controller.
[    4.707496] 3379..dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    4.713847] mmc2 : Rockchip specific MHSC: Ver 1.13 2014-09-05
[    4.719793] 1390..dw_mci_set_ios:  no card. [mmc2]
[    4.738256] 1390..dw_mci_set_ios:  no card. [mmc2]
[    4.757951] 1390..dw_mci_set_ios:  no card. [mmc2]
[    4.757966] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    4.757971] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    4.758173] leds-gpio leds.37: pins are not configured from the driver
[    4.758349] hidraw: raw HID events driver (C) Jiri Kosina
[    4.759532] usbcore: registered new interface driver usbhid
[    4.759537] usbhid: USB HID core driver
[    4.759777] zram: Created 1 device(s) ...
[    4.760025] ashmem: initialized
[    4.760116] logger: created 256K log 'log_main'
[    4.760191] logger: created 256K log 'log_events'
[    4.760266] logger: created 256K log 'log_radio'
[    4.760341] logger: created 256K log 'log_system'
[    4.761235] input: rk29-keypad as /devices/ff100000.adc/key.39/input/input1
[    4.831688] es8323 probe i2c recv ok
[    4.835263] i2c-core: driver [ES8323] using legacy suspend method
[    4.841267] i2c-core: driver [ES8323] using legacy resume method
[    4.847858] rockchip-hdmi-spdif rockchip-hdmi-spdif.32: ASoC: CPU DAI (null) not registered
[    4.856077] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    4.862717] platform rockchip-hdmi-spdif.32: Driver rockchip-hdmi-spdif requests probe deferral
[    4.871496] es8323_probe
[    5.507022] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> NULL --> Left Line Mux
[    5.514820] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> NULL -> Left Line Mux
[    5.522825] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> NULL --> Left Line Mux
[    5.530677] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> NULL -> Left Line Mux
[    5.538669] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> NULL --> Left Line Mux
[    5.546855] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> NULL -> Left Line Mux
[    5.555025] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> NULL --> Right Line Mux
[    5.562829] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> NULL -> Right Line Mux
[    5.570636] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> NULL --> Right Line Mux
[    5.578462] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> NULL -> Right Line Mux
[    5.586272] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> NULL --> Right Line Mux
[    5.594608] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> NULL -> Right Line Mux
[    5.602930] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left PGA Mux
[    5.610574] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left PGA Mux
[    5.618239] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left PGA Mux
[    5.625883] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left PGA Mux
[    5.633508] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> LAMP --> Left PGA Mux
[    5.641939] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> LAMP -> Left PGA Mux
[    5.650346] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right PGA Mux
[    5.658105] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right PGA Mux
[    5.665830] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right PGA Mux
[    5.673570] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right PGA Mux
[    5.681295] ES8323 2-0010: ASoC: no dapm match for Differential Mux --> RAMP --> Right PGA Mux
[    5.689791] ES8323 2-0010: ASoC: Failed to add route Differential Mux -> RAMP -> Right PGA Mux
[    5.698308] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Differential Mux
[    5.706293] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Differential Mux
[    5.714297] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Differential Mux
[    5.722282] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Differential Mux
[    5.730249] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Differential Mux
[    5.738253] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Differential Mux
[    5.746234] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Differential Mux
[    5.754247] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Differential Mux
[    5.762262] ES8323 2-0010: ASoC: no dapm match for LINPUT1 --> LAMP --> Left Line Mux
[    5.769978] ES8323 2-0010: ASoC: Failed to add route LINPUT1 -> LAMP -> Left Line Mux
[    5.777729] ES8323 2-0010: ASoC: no dapm match for LINPUT2 --> LAMP --> Left Line Mux
[    5.785458] ES8323 2-0010: ASoC: Failed to add route LINPUT2 -> LAMP -> Left Line Mux
[    5.793192] ES8323 2-0010: ASoC: no dapm match for Left PGA Mux --> LAMP --> Left Line Mux
[    5.801354] ES8323 2-0010: ASoC: Failed to add route Left PGA Mux -> LAMP -> Left Line Mux
[    5.809492] ES8323 2-0010: ASoC: no dapm match for RINPUT1 --> RAMP --> Right Line Mux
[    5.817328] ES8323 2-0010: ASoC: Failed to add route RINPUT1 -> RAMP -> Right Line Mux
[    5.825129] ES8323 2-0010: ASoC: no dapm match for RINPUT2 --> RAMP --> Right Line Mux
[    5.832928] ES8323 2-0010: ASoC: Failed to add route RINPUT2 -> RAMP -> Right Line Mux
[    5.840733] ES8323 2-0010: ASoC: no dapm match for Right PGA Mux --> RAMP --> Right Line Mux
[    5.849028] ES8323 2-0010: ASoC: Failed to add route Right PGA Mux -> RAMP -> Right Line Mux
[    5.857557] ES8323 2-0010: ASoC: mux Right Line Mux has no paths
[    5.863502] ES8323 2-0010: ASoC: mux Left Line Mux has no paths
[    5.869332] ES8323 2-0010: ASoC: mux Right PGA Mux has no paths
[    5.875199] ES8323 2-0010: ASoC: mux Left PGA Mux has no paths
[    5.880975] ES8323 2-0010: ASoC: mux Differential Mux has no paths
[    5.890921] rockchip-es8323 rockchip-es8323.34:  ES8323 HiFi <-> rockchip-i2s.0 mapping ok
[    5.899683] input: RK_ES8323 Headphone Jack as /devices/rockchip-es8323.34/sound/card0/input2
[    5.909109] rockchip-hdmi-i2s rockchip-hdmi-i2s.31:  rk-hdmi-i2s-hifi <-> rockchip-i2s.0 mapping ok
[    5.918582] u32 classifier
[    5.921277]     Actions configured
[    5.924626] Netfilter messages via NETLINK v0.30.
[    5.929298] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    5.935595] ctnetlink v0.93: registering with nfnetlink.
[    5.940888] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    5.947727] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    5.953705] xt_time: kernel timezone is -0000
[    5.958175] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.963523] arp_tables: (C) 2002 David S. Miller
[    5.968092] TCP: cubic registered
[    5.971361] Initializing XFRM netlink socket
[    5.975772] NET: Registered protocol family 10
[    5.980638] mip6: Mobile IPv6
[    5.983572] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    5.989000] sit: IPv6 over IPv4 tunneling driver
[    5.993845] NET: Registered protocol family 17
[    5.998248] NET: Registered protocol family 15
[    6.002656] Bridge firewalling registered
[    6.006600] Ebtables v2.0 registered
[    6.010248] Bluetooth: RFCOMM TTY layer initialized
[    6.015056] Bluetooth: RFCOMM socket layer initialized
[    6.020128] Bluetooth: RFCOMM ver 1.11
[    6.023813] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    6.029036] Bluetooth: BNEP filters: protocol multicast
[    6.034172] Bluetooth: BNEP socket layer initialized
[    6.039059] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    6.044877] Bluetooth: HIDP socket layer initialized
[    6.049777] l2tp_core: L2TP core driver, V2.0
[    6.054063] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    6.058780] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    6.063543] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    6.068258] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[    6.075098] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    6.082117] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    6.090496] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[    6.097781] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,poweren_gpio = 156, flags = 0.
[    6.106767] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 158, flags = 0.
[    6.115823] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[    6.120978] [WLAN_RFKILL]: rockchip_wifi_voltage_select: wifi & sdio reference voltage: 1.8V
[    6.129300] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[    6.133954] [BT_RFKILL]: Enter rfkill_rk_init
[    6.138346] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 147.
[    6.146394] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,power_gpio = 155.
[    6.154345] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 157.
[    6.162307] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 154.
[    6.170182] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 159.
[    6.178416] [BT_RFKILL]: Request irq for bt wakeup host
[    6.183612] [BT_RFKILL]: ** disable irq
[    6.187450] [BT_RFKILL]: ap6335 device registered.
[    6.192931] rk3288-hdmi ff980000.hdmi: rk3288 hdmi probe sucess.
[    6.199490] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    6.207043] rk3288_init_suspend
[    6.210131] rk3288_suspend_init enter
[    6.213830] rk3288_suspend_init: pm_ctrbits =200007
[    6.218646] gpio_get_dts_info suspend:4
[    6.222414] gpio_get_dts_info resume:4
[    6.226101] rockchip,pmic-suspend_gpios:14007a10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    6.234182] rockchip,pmic-resume_gpios:2007a11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
[    6.242181] clks_gating_suspend_init:clkgt info ok
[    6.246961] Registering SWP/SWPB emulation handler
[    6.251932] ddrfreq: verion 1.2 20140526
[    6.255799] ddrfreq: normal 396MHz video_1080p 240MHz video_4k 396MHz dualview 396MHz idle 0MHz suspend 200MHz reboot 396MHz
[    6.266824] ddrfreq: auto-freq=0
[    6.270005] ddrfreq: auto-freq-table[0] 240MHz
[    6.274375] ddrfreq: auto-freq-table[1] 324MHz
[    6.278738] ddrfreq: auto-freq-table[2] 396MHz
[    6.283101] ddrfreq: auto-freq-table[3] 528MHz
[    6.289395] regulator-dummy: disabling
[    6.293418] rockchip-hdmi-spdif rockchip-hdmi-spdif.32: ASoC: CPU DAI (null) not registered
[    6.301636] rockchip_hdmi_spdif_audio_probe() register card failed:-517
[    6.308171] platform rockchip-hdmi-spdif.32: Driver rockchip-hdmi-spdif requests probe deferral
[    6.316806] pcd_pullup, is_on 0
[    6.319917] file system registered
[    6.323781] android_usb gadget: Mass Storage Function, version: 2009/09/11
[    6.330535] android_usb gadget: Number of LUNs=2
[    6.335085]  lun0: LUN: removable file: (no medium)
[    6.339876]  lun1: LUN: removable file: (no medium)
[    6.344784] android_usb gadget: android_usb ready
[    6.349929] rtc_hym8563 0-0051: setting system clock to 2011-01-01 12:00:50 UTC (1293883250)
[    6.362748] rk_spdif:rk_spdif_init
[    6.366252] rk_spdif:Entered spdif_probe
[    6.370291] rk_spdif:spdif:spdif probe ok!
[    6.374840] usbcore: registered new interface driver snd-usb-audio
[    6.374940] rockchip-hdmi-spdif rockchip-hdmi-spdif.32:  rk-hdmi-spdif-hifi <-> rockchip-spdif mapping ok
[    6.390357] ALSA device list:
[    6.393282]   #0: RK_ES8323
[    6.396026]   #1: RK-HDMI-I2S
[    6.398939]   #2: RK-HDMI-SPDIF
[    6.402354] Freeing unused kernel memory: 592K (c0ae3000 - c0b77000)
[    6.412983] SELinux:  Permission attach_queue in class tun_socket not defined in policy.
[    6.420969] SELinux: the above unknown classes and permissions will be denied
[    6.719848] type=1403 audit(1293883250.870:2): policy loaded auid=4294967295 ses=4294967295
[    6.728184] SELinux: Loaded policy from /sepolicy
[    6.734685] type=1404 audit(1293883250.880:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[    7.731858] init: could not import file '/init.usbstorage.rc' from '/init.rc'
[    7.738938] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
[    7.797839] init: /dev/hw_random not found
[    7.801930] keychord: using input dev ff680000.pwm for fevent
[    7.807577] keychord: using input dev rk29-keypad for fevent
[    7.818089] fs_mgr: parse_link_device : path = NULL
[    7.822915] fs_mgr: parse_link_device : path = NULL
[    7.827720] fs_mgr: parse_link_device : path = NULL
[    7.832577] fs_mgr: ---------------resize_fs blk_dev /dev/block/platform/ff0f0000.rksdmmc/by-name/system, type ext4fs_mgr: Running /sbin/resize2fs on /dev/block/platform/ff0f0000.rksdmmc/by-name/system
[    7.851871] resize2fs: resize2fs 1.41.14 (22-Dec-2010)resize2fs: The filesystem is already 196608 blocks long.  Nothing to do!resize2fs:
[    7.869924] EXT4-fs (mmcblk0p10): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
[    7.889324] EXT4-fs (mmcblk0p8): recovery complete
[    7.894798] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    7.912845] EXT4-fs (mmcblk0p11): recovery complete
[    7.917665] EXT4-fs (mmcblk0p11): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    8.070853] EXT4-fs (mmcblk0p12): 2 orphan inodes deleted
[    8.076182] EXT4-fs (mmcblk0p12): recovery complete
[    8.101551] EXT4-fs (mmcblk0p12): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,discard
[    8.127314] mali pd enabled
[    8.130069] clk enabled
[    8.133639] MALI_DVFS_STEP=5,div_dvfs=7
[    8.137412] mali_dvfs_infotbl[0].clock=99000,min_threshold=0,max_threshold=70
[    8.144453] mali_dvfs_infotbl[1].clock=179000,min_threshold=66,max_threshold=77
[    8.151635] mali_dvfs_infotbl[2].clock=297000,min_threshold=73,max_threshold=84
[    8.158856] mali_dvfs_infotbl[3].clock=417000,min_threshold=82,max_threshold=91
[    8.166056] mali_dvfs_infotbl[4].clock=480000,min_threshold=94,max_threshold=100
[    8.173429] turn on mali power
[    8.176433] kbase_platform_rk_init,register_reboot_notifier
[    8.181925] mali ffa30000.gpu: GPU identified as 0x0750 r0p0 status 1
[    8.188752] mali ffa30000.gpu: Probed as mali0
[    8.195737] rk29_ipp: version magic '3.0.8+ SMP preempt mod_unload ARMv7 ' should be '3.10.0 SMP preempt mod_unload ARMv7 p2v8 '
[    8.217103] init: /dev/hw_random not found
[    8.229229] binder: 160:160 transaction failed 29189, size 0-0
[    8.235592] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
[    8.245667] init: cannot find '/system/bin/rild3', disabling 'ril-daemon3'
[    8.314109] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
[    8.323869] init: cannot find '/system/bin/chrome.sh', disabling 'chrome'
[    8.331573] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[    8.339452] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[    8.349245] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
[    8.468343] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[    8.476394] init: powerctl: cannot expand '${sys.powerctl}'
[    8.481922] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[    8.492712] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[    8.503005] init: property 'sys.sysctl.tcp_def_init_rwnd' doesn't exist while expanding '${sys.sysctl.tcp_def_init_rwnd}'
[    8.513793] init: cannot expand '${sys.sysctl.tcp_def_init_rwnd}' while writing to '/proc/sys/net/ipv4/tcp_default_init_rwnd'
[    8.525789] android_usb: already disabled
[    8.531653] read descriptors
[    8.534497] read strings
[    8.537047] pcd_pullup, is_on 1
shell@rk3288:/ $ [    8.711379] fs_mgr: parse_link_device : path = NULL
[    8.716282] fs_mgr: parse_link_device : path = NULL
[    8.721117] fs_mgr: parse_link_device : path = NULL
[    9.411990] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.419373] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.426762] D1:camsys_open(717): camsys_marvin(ed948610) is opened!
[    9.433055] rockchip_gpio_request:GPIO7-13
[    9.437092] rockchip_gpio_set:GPIO7-13 level = 1
[    9.441634] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    9.447490] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[    9.454221] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7408,result=0x7408
[    9.464767] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    9.471562] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000  dev_name: OV8825) register success
[    9.500650] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.508673] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.513722] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.518634] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.527941] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.536374] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.544681] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.555183] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[    9.561557] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.568768] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.576028] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.619738] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[    9.626358] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[    9.635308] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x2000000) is deregister success
[    9.643733] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[    9.651989] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.659609] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.667054] D1:camsys_release(741): camsys_marvin(ed948610) is closed
[    9.682684] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.690069] rk3288-lcdc lcdc0: blank mode:0
[    9.690078] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.690084] D1:camsys_open(717): camsys_marvin(ed948610) is opened!
[    9.690154] rockchip_gpio_set:GPIO7-13 level = 1
[    9.690159] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    9.690168] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[    9.690175] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7408,result=0x7408
[    9.690180] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    9.690194] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000  dev_name: OV8858) register success
[    9.718967] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.718973] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.719076] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.719105] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.720166] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.721227] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.722279] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.725528] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[    9.726721] E:camsys_i2c_write(77): i2c write dev(addr:0x20) failed!
[    9.726757] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[    9.726763] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[    9.726768] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[    9.778537] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[    9.778577] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[    9.780636] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x2000000) is deregister success
[    9.780649] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[    9.780657] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.780661] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.780666] D1:camsys_release(741): camsys_marvin(ed948610) is closed
[    9.789613] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.789619] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[    9.789625] D1:camsys_open(717): camsys_marvin(ed948610) is opened!
[    9.789677] D1:camsys_extdev_register(230): Get RK30_PIN2_PB6(78) gpio(active: 0) for dev_id 0x2000000 success!
[    9.789687] D1:camsys_extdev_register(230): Get RK30_PIN2_PB7(79) gpio(active: 0) for dev_id 0x2000000 success!
[    9.789696] D1:camsys_extdev_register(230): Get RK30_PIN0_PB3(11) gpio(active: 1) for dev_id 0x2000000 success!
[    9.789727] rockchip_gpio_set:GPIO7-13 level = 1
[    9.789731] rockchip_gpio_direction_output:set GPIO7-13 level 1
[    9.789739] rk32_iomux_bit_op:GPIO7-13,reg=0x70,data=0xc000000,result=0x0
[    9.789746] rockchip_pmx_gpio_set_direction:gpio_direction for pin 237 as gpio7-13 to output,data=0x7408,result=0x7408
[    9.789752] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_mipi_fl
[    9.789765] D1:camsys_extdev_register(255): Extdev(dev_id: 0x2000000  dev_name: OV13850) register success
[    9.857944] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[    9.857950] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[    9.858053] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[    9.858087] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[    9.859160] D1:camsys_sysctl_extdev(335): Sysctl 11 success, gpio(11) set 1
[    9.860223] D1:camsys_sysctl_extdev(339): Sysctl 8 success, gpio(79) set 1
[    9.861285] D1:camsys_sysctl_extdev(339): Sysctl 7 success, gpio(78) set 1
[    9.864526] E:camsys_i2c_write(77): i2c write dev(addr:0x20) failed!
[    9.865712] E:camsys_i2c_write(77): i2c write dev(addr:0x6c) failed!
[    9.865750] D1:camsys_sysctl_extdev(335): Sysctl 7 success, gpio(78) set 0
[    9.865758] D1:camsys_sysctl_extdev(335): Sysctl 8 success, gpio(79) set 0
[    9.865766] D1:camsys_sysctl_extdev(339): Sysctl 11 success, gpio(11) set 0
[    9.996818] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[    9.996853] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[    9.998925] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x2000000) is deregister success
[    9.998937] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[    9.998944] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.998948] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[    9.998952] D1:camsys_release(741): camsys_marvin(ed948610) is closed
[   10.000942] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[   10.000947] D1:camsys_mipiphy_clkin_cb(29): camsys_marvin mipi phy clk in turn on
[   10.000951] D1:camsys_open(717): camsys_marvin(ed948610) is opened!
[   10.000986] D1:camsys_mrv_iomux_cb(90): marvin pinctrl select: isp_dvp10bit
[   10.001078] D1:camsys_extdev_register(255): Extdev(dev_id: 0x1000000  dev_name: OV2659) register success
[   10.115884] D1:camsys_mrv_clkin_cb(344): camsys_marvin clock(f: 210000000 Hz) in turn on
[   10.115890] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 1
[   10.115993] D1:camsys_rk3288_cfg(49): Isp_SoftRst: 0
[   10.116017] D1:camsys_mrv_clkout_cb(379): camsys_marvin clock out(rate: 24000000Hz) turn on
[   10.117078] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[   10.118132] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[   10.119179] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[   10.122404] E:camsys_i2c_write(77): i2c write dev(addr:0x60) failed!
[   10.122439] E:camsys_sysctl_extdev(342): Sysctl 7 failed, because gpio is NULL!
[   10.122444] E:camsys_sysctl_extdev(342): Sysctl 8 failed, because gpio is NULL!
[   10.122449] E:camsys_sysctl_extdev(342): Sysctl 11 failed, because gpio is NULL!
[   10.215101] D1:camsys_mrv_clkin_cb(361): camsys_marvin clock in turn off
[   10.215145] D1:camsys_mrv_clkout_cb(391): camsys_marvin clock out turn off
[   10.217195] D1:camsys_extdev_deregister(315): Extdev(dev_id: 0x1000000) is deregister success
[   10.217206] D1:camsys_irq_disconnect(642): All thread disconnect camsys_marvin irq success!
[   10.217213] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[   10.217217] D1:camsys_mipiphy_clkin_cb(31): camsys_marvin mipi phy clk in turn off
[   10.217220] D1:camsys_release(741): camsys_marvin(ed948610) is closed
[   10.290799] init: sys_prop: permission denied uid:1003  name:sys.gmali.version
[   11.211806] warning: `zygote' uses 32-bit capabilities (legacy support in use)
[   17.256373] healthd: battery l=50 v=3 t=2.6 h=2 st=3 chg=au
[   17.359021] lowmemorykiller: lowmem_shrink: convert oom_adj to oom_score_adj:
[   17.366082] lowmemorykiller: oom_adj 0 => oom_score_adj 0
[   17.371401] lowmemorykiller: oom_adj 1 => oom_score_adj 58
[   17.376814] lowmemorykiller: oom_adj 2 => oom_score_adj 117
[   17.382289] lowmemorykiller: oom_adj 3 => oom_score_adj 176
[   17.387783] lowmemorykiller: oom_adj 9 => oom_score_adj 529
[   17.393271] lowmemorykiller: oom_adj 15 => oom_score_adj 1000
[   17.634678] phy_power_on: enable = 1
[   17.677671] Read the Ethernet MAC address from IDB:00:00:00:00:00:00
[   17.684016] eth0: device MAC address aa:ac:52:16:e8:97
[   17.693180] libphy: stmmac: probed
[   17.696528] eth0: PHY ID 001cc915 at 0 IRQ 0 (stmmac-0:00) active
[   17.702557] eth0: PHY ID 001cc915 at 1 IRQ 0 (stmmac-0:01) active
[   17.816352] wifi_driver_write: wifi driver already rmmod
[   17.861802] acc_open
[   17.863964] acc_release
[   18.751668] FAT-fs (mmcblk0p14): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[   18.995045] avc:  denied  { set } for property=sys.vold.hasAsec scontext=u:r:vold:s0 tcontext=u:object_r:system_prop:s0 tclass=property_service
[   19.007795] init: sys_prop: permission denied uid:0  name:sys.vold.hasAsec
[   19.014914] init: no such service 'fuse_internal_sd'
[   19.338214] init: sys_prop: permission denied uid:10012  name:sys.gmali.version
[   19.753836] init: sys_prop: permission denied uid:10037  name:sys.gmali.version
[   20.769628] init: sys_prop: permission denied uid:1003  name:service.bootanim.exit
[   20.885747] f28c7234,f28c7234,f28c7234
[   32.981636] rk3288-hdmi ff980000.hdmi: Removed.
[   33.202102] rk3288-lcdc lcdc0: blank mode:4
[   33.822693] PM: suspend entry 2011-01-01 12:01:18.419449429 UTC
[   33.828617] PM: Syncing filesystems ... done.
[   33.848882] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   33.860003] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   33.870648] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDd543210
[   33.879267] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee3ca300
[   33.879286] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee3ca300
[   33.879296] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee3ca300
[   33.879631] rk_spdif:Entered spdif_suspend
[   33.879640] rk_spdif:spdif:Entered spdif_suspend
[   33.881675] dwc_otg_hcd_suspend, usb device mode
[   33.883577] hym8563_rtc_set_alarm:diff_sec= 34s , use time
[   33.943713] [WLAN_RFKILL]: Enter rfkill_wlan_suspend
[   33.944432] phy_power_on: enable = 0
[   33.946572] PM: suspend of devices complete after 68.453 msecs
[   33.947739] PM: late suspend of devices complete after 1.150 msecs
[   33.948980] PM: noirq suspend of devices complete after 1.238 msecs
[   33.949010] Disabling non-boot CPUs ...
[   33.951269] CPU1: shutdown
[   33.957045] CPU2: shutdown
[   33.961434] CPU3: shutdown
[   33.965217] rockchip_pinctrl_suspend:bank_num=7, suspend_wakeup=0x10
[   33.965275] rkpm_enter:
[   33.965285] GPIO0_INTEN: 00000020
[   33.965300] GPIO4_INTEN: 80000000
[   33.965308] GPIO6_INTEN: 00400000
[   33.965316] GPIO7_INTEN: 00000010
[   34.049300] Resume caused by IRQ 120
[   34.049332] wakeup irq: 00000000 00000000 01000000 00000000
[   34.049342] wakeup gpio7: 00000010
[   34.049545] rockchip_pinctrl_resume:bank_num=7, suspend_wakeup=0x10
[   34.049578] Suspended for 0.000 seconds
[   34.050372] Enabling non-boot CPUs ...
[   34.051152] CPU1: Booted secondary processor
[   34.052435] CPU1 is up
[   34.052827] CPU2: Booted secondary processor
[   34.053466] CPU2 is up
[   34.053873] CPU3: Booted secondary processor
[   34.054468] CPU3 is up
[   34.056943] PM: noirq resume of devices complete after 2.485 msecs
[   34.058225] PM: early resume of devices complete after 0.594 msecs
[   34.058618] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[   34.058645] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[   34.059007] 1390..dw_mci_set_ios:  no card. [mmc1]
[   34.059189] dwc_otg_hcd_resume, usb device mode
[   34.064223] phy_power_on: enable = 1
[   34.099122] [WLAN_RFKILL]: Enter rfkill_wlan_resume
[   34.101541] PM: resume of devices complete after 43.999 msecs
[   34.101718] cpufreq: cpufreq_resume: Failed to start governor for policy: ee3ca300
[   34.101732] cpufreq: cpufreq_resume: Failed to start governor for policy: ee3ca300
[   34.101744] cpufreq: cpufreq_resume: Failed to start governor for policy: ee3ca300
[   34.102179] rk_spdif:spdif:Entered spdif_resume
[   34.102724] [BT_RFKILL]: ** disable irq
[   34.334142] Restarting tasks ... done.
[   34.341472] PM: suspend exit 2011-01-01 12:01:52.245194833 UTC
[   34.347360] PM: suspend entry 2011-01-01 12:01:52.251172833 UTC
[   34.353362] PM: Syncing filesystems ... done.
[   34.364786] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   34.375958] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   34.386342] Suspending console(s) (use no_console_suspend to debug)
[   34.394442] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee3ca300
[   34.394453] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee3ca300
[   34.394464] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee3ca300
[   34.394770] rk_spdif:Entered spdif_suspend
[   34.394779] rk_spdif:spdif:Entered spdif_suspend
[   34.396900] dwc_otg_hcd_suspend, usb device mode
[   34.397222] dpm_run_callback(): platform_pm_suspend+0x0/0x5c returns -16
[   34.397244] PM: Device alarmtimer failed to suspend: error -16
[   34.399434] PM: Some devices failed to suspend
[   34.399598] dwc_otg_hcd_resume, usb device mode
[   34.401152] rk_spdif:spdif:Entered spdif_resume
[   34.411828] PM: resume of devices complete after 12.571 msecs
[   34.411941] cpufreq: cpufreq_resume: Failed to start governor for policy: ee3ca300
[   34.411954] cpufreq: cpufreq_resume: Failed to start governor for policy: ee3ca300
[   34.411963] cpufreq: cpufreq_resume: Failed to start governor for policy: ee3ca300
[   34.412625] [BT_RFKILL]: ** disable irq
[   34.506364] Restarting tasks ... [   34.511690] healthd: battery l=50 v=3 t=2.6 h=2 st=3 chg=au
[   34.512426] PM: suspend exit 2011-01-01 12:01:52.418936000 UTC
done.
[   36.360457] PM: suspend entry 2011-01-01 12:01:54.296901542 UTC
[   36.367037] PM: Syncing filesystems ... done.
[   36.384552] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   36.395606] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   36.406179] Suspending console(s) (use no_console_suspend to debug)
01-armoff-logdp-osc_offddrc_off2345dDd543210
[   36.414379] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee3ca300
[   36.414394] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee3ca300
[   36.414406] cpufreq: cpufreq_suspend: Failed to stop governor for policy: ee3ca300
[   36.414710] rk_spdif:Entered spdif_suspend
[   36.414731] rk_spdif:spdif:Entered spdif_suspend
[   36.416795] dwc_otg_hcd_suspend, usb device mode
[   36.418635] hym8563_rtc_set_alarm:diff_sec= 9s , use time
[   36.478365] [WLAN_RFKILL]: Enter rfkill_wlan_suspend
[   36.479060] phy_power_on: enable = 0
[   36.480699] PM: suspend of devices complete after 67.433 msecs
[   36.481752] PM: late suspend of devices complete after 1.032 msecs
[   36.482979] PM: noirq suspend of devices complete after 1.228 msecs
[   36.483001] Disabling non-boot CPUs ...
[   36.485320] CPU1: shutdown
[   36.488732] CPU2: shutdown
[   36.491442] CPU3: shutdown
[   36.493102] rockchip_pinctrl_suspend:bank_num=7, suspend_wakeup=0x10
[   36.493157] rkpm_enter:
[   36.493182] GPIO0_INTEN: 00000020
[   36.493188] GPIO4_INTEN: 80000000
[   36.493200] GPIO6_INTEN: 00400000
[   36.493208] GPIO7_INTEN: 00000010
[   36.577789] Resume caused by IRQ 120
[   36.577834] wakeup irq: 00000000 00000000 01000000 00000000
[   36.577849] wakeup gpio7: 00000010
[   36.578055] rockchip_pinctrl_resume:bank_num=7, suspend_wakeup=0x10
[   36.578088] Suspended for 0.000 seconds
[   36.578891] Enabling non-boot CPUs ...
[   36.579669] CPU1: Booted secondary processor
[   36.580922] CPU1 is up
[   36.581327] CPU2: Booted secondary processor
[   36.581967] CPU2 is up
[   36.582385] CPU3: Booted secondary processor
[   36.583114] CPU3 is up
[   36.585793] PM: noirq resume of devices complete after 2.690 msecs
[   36.586862] PM: early resume of devices complete after 0.601 msecs
[   36.587197] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1)
[   36.587273] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[   36.587832] 1390..dw_mci_set_ios:  no card. [mmc1]
[   36.588000] dwc_otg_hcd_resume, usb device mode
[   36.593103] phy_power_on: enable = 1
[   36.627853] [WLAN_RFKILL]: Enter rfkill_wlan_resume
[   36.630357] rk_spdif:spdif:Entered spdif_resume
[   36.630553] PM: resume of devices complete after 44.379 msecs
[   36.630796] cpufreq: cpufreq_resume: Failed to start governor for policy: ee3ca300
[   36.630814] cpufreq: cpufreq_resume: Failed to start governor for policy: ee3ca300
[   36.630876] cpufreq: cpufreq_resume: Failed to start governor for policy: ee3ca300
[   36.631689] [BT_RFKILL]: ** disable irq
[   36.862678] Restarting tasks ... done.
[   36.873261] PM: suspend exit 2011-01-01 12:02:03.248311584 UTC
[   36.965563] PM: suspend entry 2011-01-01 12:02:03.342104000 UTC
[   36.971510] PM: Syncing filesystems ... done.
[   36.985509] Freezing user space processes ... (elapsed 0.004 seconds) done.
[   36.997465] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[   37.008185] Suspending console(s) (use no_console_suspend to debug)

求大牛指点迷津

公司：深圳寒武纪
联系方式：18344935179   huang.hq@aiiage.com

zhansb

这个深度休眠的功能是正常的
不想深度休眠，可以去百度一下android的电源管理，自己修改一下

暴走的阿Sai

正常启动后，拔掉USB下载线，达到休眠设定的时间，就会进入深度睡眠。

楼主启动到那个地方，是否已经进入了主界面？

qingxia0702

暴走的阿Sai 发表于 2015-8-12 12:57
正常启动后，拔掉USB下载线，达到休眠设定的时间，就会进入深度睡眠。

楼主启动到那个地方，是否已经进 ...

是的，那么这个设置应该是可以取消的吧

qingxia0702

zhansb 发表于 2015-8-12 11:02
这个深度休眠的功能是正常的
不想深度休眠，可以去百度一下android的电源管理，自己修改一下

好的，多谢

jingjin221

Andrdoi 4.4,pad版本的SDK，在进行cat /sys/power/state的时候只有freeze 和mem ,其中mem为linux中挂起到内存（深度睡眠），但是内核里面并没有on唤醒功能，所以建议关掉深度睡眠功能，只进行early suspend，方法在kernel/kernel/power/suspend.c 中将PM_SUSPEND_MEM改为PM_SUSPEND_STANDBY
int suspend_valid_only_mem(suspend_state_t state)
{
        return state == PM_SUSPEND_STANDBY;//PM_SUSPEND_MEM;
}