Firefly开源社区

打印 上一主题 下一主题

[Android] System update via microSD

25

积分

0

威望

0

贡献

技术小白

积分
25

System update via microSD

发表于 2019-1-17 09:42:02      浏览:3650 | 回复:3        打印      只看该作者   [复制链接] 楼主
Hello,
I use firefly-rk3288 android 5.1 sdk.
I want to update the system with microSD, but I can't.
I made update.img and wrote to microSD. I reboot the microSD after insert it into the board, but update is fail.
Please help me.
回复

使用道具 举报

3750

积分

17

威望

18

贡献

官方团队

Rank: 9Rank: 9Rank: 9

积分
3750
发表于 2019-1-17 11:33:06        只看该作者  沙发
hi,you can use the tool as follow to make microsd
[url=]SD_Firmware_Tool._v1.46.zip[/url]

SD_Firmware_Tool._v1.46.zip

453.91 KB, 下载次数: 1, 下载积分: 灯泡 -1 , 经验 -1

回复

使用道具 举报

25

积分

0

威望

0

贡献

技术小白

积分
25
发表于 2019-1-17 13:00:41        只看该作者  板凳
jpchen 发表于 2019-1-17 11:33
hi,you can use the tool as follow to make microsd
SD_Firmware_Tool._v1.46.zip

Thank you for your answer.
I made a microSD for upgrade using the tool you attached.
However, when I put the microSD into the board and reboot, the upgrade does not work.
I can't see anything on the screen.
I really need an upgrade using MicroSD.
What did I do wrong?

++ boot log

DDR Version 1.00 20160530
In
Channel a: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Channel b: DDR3 200MHz
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=16 Size=1024MB
Memory OK
Memory OK
OUT


U-Boot 2014.10-RK3288-10 (Nov 20 2017 - 17:19:35)

CPU: rk3288
cpu version = 0
CPU's clock information:
    arm pll = 600000000HZ
    periph pll = 297000000HZ
    ddr pll = 200000000HZ
    codec pll = 384000000HZ
Board:  Rockchip platform Board
DRAM:  Found dram banks: 1
Adding bank:0000000000000000(0000000080000000)
128 MiB
GIC CPU mask = 0x00000001
SdmmcInit = 0 0
SDCard Update.
storage init OK!
Using default environment

GetParam
Load FDT from boot image.
power key: bank-0 pin-5
dwc_otg_check_dpdm: usb bc disconnected
pmic:rk808
can't find dts node for pwm1
set pwm voltage ok,pwm_id =1 vol=1100000,pwm_value=63
Can't find dts node for fuel guage cw201x
SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 0000-00-00#0.00
empty serial no.
unknown reboot type 1
no fuel gauge found
no fuel gauge found
read logo on state from dts [0]
no fuel gauge found
Secure Boot state: 0
kernel   @ 0x02000000 (0x0064e470)
ramdisk  @ 0x05bf0000 (0x002ad198)
bootrk: do_bootm_linux...
   Loading Device Tree to 05600000, end 0561afb1 ... OK
Add bank:0000000000000000, 0000000080000000

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x500
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.0 (loki@ubuntu-jlee) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #386 SMP PREEMPT Mon Dec 10 22:47:12 KST 2018
[    0.000000] CPU: ARMv7 Processor [410fc0d1] revision 1 (ARMv7), cr=10c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Rockchip RK3288 (Flattened Device Tree), model: rockchip,rk3288
[    0.000000] rockchip_ion_reserve
[    0.000000] ion heap(drm): base(0) size(0) align(0)
[    0.000000] ion heap(cma): base(0) size(1000000) align(0)
[    0.000000] ion heap(vmalloc): base(0) size(0) align(0)
[    0.000000] cma: CMA: reserved 16 MiB at 7f000000
[    0.000000] ion_reserve: cma reserved base 7f000000 size 16777216
[    0.000000] cma: CMA: reserved 16 MiB at 1f000000
[    0.000000] Memory policy: ECC disabled, Data cache writealloc
[    0.000000] Boot mode: RECOVERY (2) flag: RECOVER (0xc3524203)
[    0.000000] PERCPU: Embedded 9 pages/cpu @c1e2b000 s13376 r8192 d15296 u36864
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 523264
[    0.000000] Kernel command line: vmalloc=496M console=ttyS2 androidboot.selinux=permissive androidboot.hardware=rk30board androidboot.console=ttyS2 root=/dev/block/mtd/by-name/linuxroot rw rootfstype=ext4 init=/sbin/init  mtdparts=rk29xxnand:0x00002000@0x00000000(parameter),0x00002000@0x00002000(uboot),0x00002000@0x00004000(misc),0x00008000@0x00006000(resource),0x00008000@0x0000e000(kernel),0x00010000@0x00016000(boot),0x00010000@0x00026000(recovery),0x0001a000@0x00036000(backup),0x00040000@0x00050000(cache),0x00002000@0x00090000(kpanic),0x00300000@0x00092000(system),0x00008000@0x00392000(metadata),0x00002000@0x0039A000(baseparamer),-@0x003BC000(userdata) storagemedia=sd sdfwupdate loader.timestamp=2017-11-20_17:19:35
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 4194304 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 2048MB = 2048MB total
[    0.000000] Memory: 2025964k/2025964k available, 71188k reserved, 1556480K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0b0ba80   (11279 kB)
[    0.000000]       .init : 0xc0b0c000 - 0xc0b64440   ( 354 kB)
[    0.000000]       .data : 0xc0b66000 - 0xc0cb5bc0   (1343 kB)
[    0.000000]        .bss : 0xc0cb5bc0 - 0xc0dd387c   (1144 kB)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] rk_clk_tree_init start!
[    0.000000] rkclk: _rkclk_add_provider: fail to get ehci1phy_12m_div
[    0.000000] rkclk: rkclk_cache_parents: ehci1phy_12m_div clk_get error
[    0.000000] rk_get_uboot_display_flag: 7
[    0.000000] rkclk_init_clks: cnt_rate = 29
[    0.000000] rk3288 set GPLL BW 20 for HDMI!
[    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[    0.000000] Switching to timer-based delay loop
[    0.000000] sched_clock: ARM arch timer >56 bits at 24000kHz, resolution 41ns
[    0.000000] midi clk = de835e00, pclk = de83bd00, rate = 16e3600
[    0.000000] timer_midi_init  (clk=miditimer, mux=0, scl=24, rate=1000000, div=1)
[    0.000000] timer.1000000: midi ,       100(HZ:0)
[    0.000000] process version: 3
[    0.000000] channel:0, lkg:11
[    0.000000] target-temp:80
[    0.000000] channel:2, lkg:0
[    0.000000] channel:0, lkg:11
[    0.000000] channel:1, lkg:8
[    0.000000] sched_clock: 32 bits at 100 Hz, resolution 10000000ns, wraps every 4294967286ms
[    0.501466] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.501482] pid_max: default: 32768 minimum: 301
[    0.501599] Security Framework initialized
[    0.501643] Mount-cache hash table entries: 512
[    0.502263] Initializing cgroup subsys debug
[    0.502276] Initializing cgroup subsys memory
[    0.502303] Initializing cgroup subsys freezer
[    0.502332] CPU: Testing write buffer coherency: ok
[    0.502629]pus/cpu@1 missing clock-frequency property
[    0.502652] /cpus/cpu@2 missing clock-frequency property
[    0.502661] /cpus/cpu@3 missing clock-frequency property
[    0.502706] CPU0: thread -1, cpu 0, socket 5, mpidr 80000500
[    0.502754] Setting up static identity map for 0xc07f9688 - 0xc07f96e0
[    0.505999] last_log: 0x1e900000 map to 0xe0804000 and copy to 0xe0886000, size 0x80000 early 0x17ea (version 3.1)
[    0.579462] CPU1: Booted secondary processor
[    0.579494] CPU1: thread -1, cpu 1, socket 5, mpidr 80000501
[    0.599143] CPU2: Booted secondary processor
[    0.599166] CPU2: thread -1, cpu 2, socket 5, mpidr 80000502
[    0.618853] CPU3: Booted secondary processor
[    0.618876] CPU3: thread -1, cpu 3, socket 5, mpidr 80000503
[    0.618979] Brought up 4 CPUs
[    0.619008] SMP: Total of 4 processors activated (192.00 BogoMIPS).
[    0.619017] CPU: All CPU(s) started in SVC mode.
[    0.619709] devtmpfs: initialized
[    0.623965] VFP support v0.3: implementor 41 architecture 3 part 30 variant d rev 0
[    0.625034] pinctrl core: initialized pinctrl subsystem
[    0.625276] regulator-dummy: no parameters
[    0.638522] NET: Registered protocol family 16
[    0.640279] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.640580] ion_snapshot: 0x1ea80000 map to 0xe0907000 and copy to 0xc0daed8c (version 0.1)
[    0.640797] Registered FIQ tty driver
[    0.641191] fiq-debugger is disabled in device tree
[    0.641842] rockchip_get_bank_data:name=base start=0xff750000,end=0xff7500ff
[    0.641864] rockchip_get_bank_d1/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
# ] rockchip_get_bank_data:name=pull_bank0 start=0xff730064,end=0xff73006f
[    0.641897] rockchip_get_bank_data:name=drv_bank0 start=0xff730070,end=0xff73007b
[    0.641986] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio1@ff780000 start=0xff780000,end=0xff7800ff
[    0.642051] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio2@ff790000 start=0xff790000,end=0xff7900ff
[    0.642112] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio3@ff7a0000 start=0xff7a0000,end=0xff7a00ff
[    0.642174] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio4@ff7b0000 start=0xff7b0000,end=0xff7b00ff
[    0.642243] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio5@ff7c0000 start=0xff7c0000,end=0xff7c00ff
[    0.642307] rockx/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
ff7d0000,end=0xff7d00ff
[    0.642369] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio7@ff7e0000 start=0xff7e0000,end=0xff7e00ff
[    0.642430] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio8@ff7f0000 start=0xff7f0000,end=0xff7f00ff
[    0.642497] rockchip_get_bank_data:name=/pinctrl@ff770000/gpio15@ff7f2000 start=0xff7f2000,end=0xff7f20ff
[    0.642560] rockchip_pinctrl_probe:name=RK3288-GPIO,type=3
[    0.642573] rockchip_pinctrl_probe:name=base start=0xff770000,end=0xff77013f
[    0.642585] rockchip_pinctrl_probe:name=pull start=0xff770140,end=0xff7701bf
[    0.642595] rockchip_pinctrl_probe:name=drv start=0xff7701c0,end=0xff77023f
[    0.643196] rockchip_interrupts_register:bank_num=7
[    0.6455/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
165] rockchip_pinctrl_probe:init ok
[    0.652488] rk_iommu ff900800.iep_mmu: (iep) Enter
[    0.652575] rk_iommu ff900800.iep_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.652588] rk_iommu ff900800.iep_mmu: (iep) Initialized
[    0.652761] rk_iommu ff950800.vip_mmu: (vip) Enter
[    0.652832] rk_iommu ff950800.vip_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.652844] rk_iommu ff950800.vip_mmu: (vip) Initialized
[    0.653007] rk_iommu ff930300.vopb_mmu: (vopb) Enter
[    0.653076] rk_iommu ff930300.vopb_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.653088] rk_iommu ff930300.vopb_mmu: (vopb) Initialized
[    0.653259] rk_iommu ff940300.vopl_mmu: (vopl) Enx/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
3ffff000 B IOVMM from 0x10000000.
[    0.653342] rk_iommu ff940300.vopl_mmu: (vopl) Initialized
[    0.653514] rk_iommu ff9c0440.hevc_mmu: (hevc) Enter
[    0.653588] rk_iommu ff9c0440.hevc_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.653600] rk_iommu ff9c0440.hevc_mmu: (hevc) Initialized
[    0.653776] rk_iommu ff9a0800.vpu_mmu: (vpu) Enter
[    0.653846] rk_iommu ff9a0800.vpu_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.653858] rk_iommu ff9a0800.vpu_mmu: (vpu) Initialized
[    0.654030] rk_iommu ff914000.isp_mmu: (isp_mmu) Enter
[    0.654101] rk_iommu ff914000.isp_mmu: IOVMM: Created 0x3ffff000 B IOVMM from 0x10000000.
[    0.654113] rk_iommu ff9n/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
t: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.655879] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.656463] rk3368_init_rockchip_pmu_ops: could not find pmu dt node
[    0.656484] DDR DEBUG: version 1.00 20150126
[    0.656511] DDR DEBUG: Channel a:
[    0.656520] DDR DEBUG: DDR3 Device
[    0.656533] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.656541] DDR DEBUG: Channel b:
[    0.656548] DDR DEBUG: DDR3 Device
[    0.656560] DDR DEBUG: Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Total Capability=1024MB
[    0.656569] DDR DEBUG: addr=0xcbf000
[    0.656579] DDR DEBUG: stride=9, size=256, halfcap=40000000
[    0.6565886/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
597] DDR DEBUG: chAddr[0]=0xcbf000, chAddr[1]=0xcbf000
[    0.656608] DDR DEBUG: dtar[0]=0x70197000, dtar[1]=0x70197000
[    0.656663] DDR DEBUG: init success!!! freq=200MHz
[    0.656670] DDR DEBUG: Channel a:
[    0.656683] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.656695] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.656707] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.656720] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.656731] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x /sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
DRV Pull-Dwn=0x19
[    0.656749] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
[    0.656756] DDR DEBUG: Channel b:
[    0.656767] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.656780] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.656792] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.656804] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=4,0, DGSL=1,1 extra clock, DGPS=180,90
[    0.656814] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
[    0.656823] DDR DEBUG: DRV Pull-Up=0x19, DRV Pull-Dwn=0x19
[    0.656831] DDR DEBUGs/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
lab <bio-0> at 0
[    0.680696] Rockchip hdmi driver version 2.0
[    0.680696] .
[    0.681950] SCSI subsystem initialized
[    0.682100] usbcore: registered new interface driver usbfs
[    0.682143] usbcore: registered new interface driver hub
[    0.682228] usbcore: registered new device driver usb
[    0.686183] rockchip_i2c ff650000.i2c: i2c-0: Rockchip I2C adapter
[    0.686641] rockchip_i2c ff140000.i2c: i2c-1: Rockchip I2C adapter
[    0.687090] rockchip_i2c ff660000.i2c: i2c-2: Rockchip I2C adapter
[    0.687328] rockchip_i2c ff150000.i2c: i2c-3: Rockchip I2C adapter
[    0.687614] rockchip_i2c ff160000.i2c: i2c-4: Rockchip I2C adapter
[    0.687733] media: Linux media interface: v0.6/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
87822] pps_core: LinuxPPS API ver. 1 registered
[    0.687832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.687851] PTP clock support registered
[    0.687899] i2c-core: driver [bq24296] using legacy suspend method
[    0.687908] i2c-core: driver [bq24296] using legacy resume method
[    0.688235] RK29 Watchdog Timer, (c) 2011 Rockchip Electronics
[    0.688878] ion_drm_heap_create: 0@0
[    0.689000] Rockchip ion module is successfully loaded (v1.1)
[    0.689161] Advanced Linux Sound Architecture Driver Initialized.
[    0.689537] Bluetooth: Core ver 2.16
[    0.689590] NET: Registered protocol family 31
[    0.689600] Bluetooth: HCIo/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
oth: HCI socket layer initialized
[    0.689629] Bluetooth: L2CAP socket layer initialized
[    0.689653] Bluetooth: SCO socket layer initialized
[    0.689884] cfg80211: Calling CRDA to update world regulatory domain
[    0.690968] rk808_i2c_probe,line=1361
[    0.691498] rk808_pre_init,line=1230
[    0.707672] vdd_arm: 712 <--> 1500 mV at 1100 mV
[    0.714433] vdd_gpu: 712 <--> 1500 mV at 1100 mV
[    0.720860] rk_dcdc3: 1200 mV
[    0.729641] vccio: 3300 mV
[    0.736072] rk_ldo1: 1800 mV
[    0.742498] rk_ldo2: 3300 mV
[    0.748919] rk_ldo3: 1000 mV
[    0.755351] rk_ldo4: 1800 mV
[    0.761772] rk_ldo5: 3300 mV
[    0.768225] rk_ldo6: 1000 mV
[    0.774647] rk_ldk/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
_ldo9: at 3300 mV
[    0.787629] rk_ldo10: at 3300 mV
[    0.790360] rk808_irq_init: rk808_pmic_irq=1
[    0.790673] i2c-core: driver [rk818] using legacy suspend method
[    0.790684] i2c-core: driver [rk818] using legacy resume method
[    0.791031] rk808_rtc_probe,line=540
[    0.807925] rk808-rtc rk808-rtc: rtc core: registered rk808 as rtc0
[    0.811411] rk808_rtc_probe:ok
[    0.812904] Switching to clocksource arch_sys_counter
[    0.833766] rga: Module initialized.
[    0.834445] rga2 ff920000.rga: rga ion client create success!
[    0.834594] rga: Driver loaded succesfully
[    0.834794] fb disp policy is box
[    0.834833] rk-fb rockchip-fb: rk fb ion client cb/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
uffer driver probe
[    0.835185] rk-screen rk_screen.8: rockchip screen probe success
[    0.835422] rk32-lvds rk32-lvds: rk32 lvds driver probe success
[    0.835801] rk3288-lcdc lcdc0: can't find power_ctr node for lcdc0
[    0.836008] graphics fb0: rockchip framebuffer registerd:fb0
[    0.836293] graphics fb1: rockchip framebuffer registerd:fb1
[    0.836455] graphics fb2: rockchip framebuffer registerd:fb2
[    0.836623] graphics fb3: rockchip framebuffer registerd:fb3
[    0.837403] vop ver:3007236,unsupport output color:1
[    0.837546] rk3288-lcdc lcdc0: lcdc0: dclk:148500000>>fps:60
[    0.837571] rk3288-lcdc lcdc0: wakeup from standby!
[    0.867832] alloc_buffer:ion_phy_adn/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
:0x1800000
[    0.880627] rk_iommu ff930300.vopb_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1ea9c000
[    0.880642] rk3288-lcdc lcdc0: lcdc0 probe ok, iommu enabled
[    0.880851] rk3288-lcdc lcdc1: can't find power_ctr node for lcdc1
[    0.880864] rk_fb_trsm_ops_get:un supported transmitter:0!
[    0.881109] graphics fb4: rockchip framebuffer registerd:fb4
[    0.881427] graphics fb5: rockchip framebuffer registerd:fb5
[    0.881582] graphics fb6: rockchip framebuffer registerd:fb6
[    0.881740] graphics fb7: rockchip framebuffer registerd:fb7
[    0.882560] unknow screen type: 0
[    0.882576] vop ver:3007236,unsupport output color:1
[    0.882637] rk3288-8/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
-lcdc lcdc1: wakeup from standby!
[    0.886362] fb4:phy:10000000>>vir:e0991000>>len:0x1800000
[    0.886376] rk3288-lcdc lcdc1: lcdc1 probe ok, iommu enabled
[    0.886777] rockchip_set_mux:warning ignore bank num 15
[    0.886911] rockchip_set_mux:warning ignore bank num 15
[    0.887027] rockchip_set_mux:warning ignore bank num 15
[    0.887149] rockchip_set_mux:warning ignore bank num 15
[    0.887257] rockchip_set_mux:warning ignore bank num 15
[    0.887374] rockchip_set_mux:warning ignore bank num 15
[    0.888326] rockchip_set_mux:warning ignore bank num 15
[    0.888481] rockchip_set_mux:warning ignore bank num 15
[    0.889421] rockchip_set_mux:warning ignore bank 1/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
5
[    0.890486] rockchip_set_mux:warning ignore bank num 15
[    0.890634] rockchip_set_mux:warning ignore bank num 15
[    0.891543] rockchip_set_mux:warning ignore bank num 15
[    0.891720] rockchip_set_mux:warning ignore bank num 15
[    0.893103] NET: Registered protocol family 2
[    0.893759] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.893834] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.893906] TCP: Hash tables configured (established 4096 bind 4096)
[    0.893957] TCP: reno registered
[    0.893972] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.893997] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.89g/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
initramfs...
[    1.025352] Freeing initrd memory: 2740K (c5bf0000 - c5e9d000)
[    1.026100] hw perfevents: enabled with ARMv7 Cortex-A12 PMU driver, 7 counters available
[    1.026701] vcodec_service: probe device ff9a0000.vpu_service
[    1.026906] vcodec_service: No reset resource define
[    1.027078] vcodec_service: ff9a0000.vpu_service: power on
[    1.027167] vcodec_service: probe device ff9a0000.vpu_service
[    1.027183] vcodec_service: checking hw id 4831
[    1.028162] vcodec_service: ff9a0000.vpu_service: power off...
[    1.028207] vcodec_service: done
[    1.028215] vcodec_service: init success
[    1.028280] vcodec_service: probe device ff9c0000.hevc_service
[    1.02/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
8699] vcodec_service: probe device ff9c0000.hevc_service
[    1.028714] vcodec_service: checking hw id 6867
[    1.029267] vcodec_service: ff9c0000.hevc_service: power off...
[    1.029307] vcodec_service: done
[    1.029315] vcodec_service: init success
[    1.029490] rknandbase v1.0 2014-03-31
[    1.029734] rknand_probe clk rate = 148500000
[    1.029859] rknand_driver:ret = 0
[    1.030267] audit: initializing netlink socket (disabled)
[    1.030308] type=2000 audit(0.530:1): initialized
[    1.031173] bounce pool size: 64 pages
[    1.035740] fuse init (API version 7.22)
[    1.036097] msgmni has been set to 954
[    1.037531] Block layer SCSI generic (bsg) driver version 0.4 loa /sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
  1.037557] io scheduler deadline registered
[    1.037641] io scheduler cfq registered (default)
[    1.038531] rockchip_hdmiv2_probe
[    1.038696] hdmi_register() - video source 1 display 0
[    1.039030] hdmi_submit_work event 0100 delay 0 sync 0
[    1.039062]
[    1.039062] hdmi_work_queue() - evt= 1 0
[    1.039078] hdmi_dev_enable
[    1.039086] rockchip-hdmiv2 ff980000.hdmi: rockchip hdmiv2 probe sucess.
[    1.039101] hdmi_submit_work event 0404 delay 10 sync 0
[    1.039115]
[    1.039115] hdmi_work_queue() - exit evt= 1 0
[    1.039315]
[    1.039315] hdmi_work_queue() - evt= 4 4
[    1.039332] [hdmi_dev_detect_hotplug] reg3004 value 00
[    1.039341] hdmi_work_queue() - hpd is 0 hotplug is 0
[
  /sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
[    1.039842] IEP Power ON
[    1.039882] iep ion client create success!
[    1.040326] rk_iommu ff900800.iep_mmu: rockchip_iommu_attach_device: Attached new IOMMU with pgtable 0x1ea97000
[    1.040337] IEP Power OFF
[    1.040353] IEP Driver loaded succesfully
[    1.040454] Module initialized.
[    1.041253] dma-pl330 ffb20000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.041270] dma-pl330 ffb20000.pdma:         DBUFF-64x8bytes Num_Chans-5 Num_Peri-6 Num_Events-10
[    1.042604] dma-pl330 ff250000.pdma: Loaded driver for PL330 DMAC-2364208
[    1.042620] dma-pl330 ff250000.pdma:         DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[    1.042983] vdd_logic: 925 <--> 1400 mV at 1100 mV
[    1.043301]y/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
S0 at MMIO 0xff180000 (irq = 87) is a rk29_serial.0
[    1.043729] serial ff180000.serial: membase e097e000
[    1.043897] ff190000.serial: ttyS1 at MMIO 0xff190000 (irq = 88) is a rk29_serial.1
[    1.044062] serial ff190000.serial: membase e2192000
[    1.044201] ff690000.serial: ttyS2 at MMIO 0xff690000 (irq = 89) is a rk29_serial.2
[    1.045855] console [ttyS2] enabled
[    1.046025] serial ff690000.serial: membase fed60000
[    1.046195] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 90) is a rk29_serial.3
[    1.046375] serial ff1b0000.serial: membase e21be000
[    1.046538] ff1c0000.serial: ttyS4 at MMIO 0xff1c0000 (irq = 91) is a rk29_serial.4
[    1.046713] serial ff1c0000.serial: membase e21er/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
eated 1 device(s) ...
[    1.049828] i2c-core: driver [mpu6050B1] using legacy suspend method
[    1.049840] i2c-core: driver [mpu6050B1] using legacy resume method
[    1.049856] mpu_init: Probe name mpu6050B1
[    1.050001] ak8963_mod_init: Probe name ak8963_mod
[    1.050800] SCSI Media Changer driver v0.25
[    1.051089] dws->regs: e21e4000
[    1.052463] rockchip_spi_probe:num_cs=2,bus_num=2,irq=78,freq=45692308 ok
[    1.052739] tun: Universal TUN/TAP device driver, 1.6
[    1.052751] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    1.052869] vmac_init.
[    1.053461] stmmac_probe_config_dt: Can not read property: pmu_regulator.
[    1.053476] stmmac_probe_config_dt: clock input/outpu3/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
).
[    1.053500] stmmac_probe_config_dt: RX delay(0x19).
[    1.053548] stmmac_probe_config_dt: is rockchip,rk3288-gmac
[    1.053559] stmmc_pltfr_init:
[    1.053568] stmmc_pltfr_init: ERROR: Get power-gpio failed.
[    1.053591] gmac_phy_reset: ERROR: Request pin stmmc_pltfr_init failed.
[    1.053602] stmmc_pltfr_init: init for RGMII
[    1.053613] tx delay=0x23
[    1.053613] rx delay=0x19
[    1.053629] tx delay=0x23
[    1.053629] rx delay=0x19
[    1.054083] stmmac - user ID: 0x10, Synopsys ID: 0x35
[    1.054094]  Normal descriptors
[    1.054103]  Ring mode enabled
[    1.054113]  DMA HW capability register supported
[    1.054125]  RX Checksum Offload Engine supported (type 2)
[    1.0 /sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
On Lan supported
[    1.054182]  Enable RX Mitigation via HW Watchdog Timer
[    1.054639] PPP generic driver version 2.4.2
[    1.054799] PPP BSD Compression module registered
[    1.054812] PPP Deflate Compression module registered
[    1.054836] PPP MPPE Compression module registered
[    1.054849] NET: Registered protocol family 24
[    1.054886] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[    1.054899] CSLIP: code copyright 1989 Regents of the University of California.
[    1.054913] Rockchip WiFi SYS interface (V1.00) ...
[    1.054949] esp_mem_init enter date May 17 2018 13:21:14
[    1.054959] esp_mem_init VERSION [V2.5]
[    1.055004] esp_ma/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
ce driver catc
[    1.055122] usbcore: registered new interface driver kaweth
[    1.055135] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[    1.055174] usbcore: registered new interface driver pegasus
[    1.055212] usbcore: registered new interface driver rtl8150
[    1.055256] usbcore: registered new interface driver r8152
[    1.055268] hso: drivers/net/usb/hso.c: Option Wireless
[    1.055338] usbcore: registered new interface driver hso
[    1.055386] usbcore: registered new interface driver asix
[    1.055427] usbcore: registered new interface driver ax88179_178a
[    1.055466] usbcore: registered new interface driver cdc_ether
[    1.055503] usbcore: registered new interr/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
face driver dm9601
[    1.055585] usbcore: registered new interface driver dm9620
[    1.055634] usbcore: registered new interface driver smsc75xx
[    1.055682] usbcore: registered new interface driver smsc95xx
[    1.055721] usbcore: registered new interface driver gl620a
[    1.055761] usbcore: registered new interface driver net1080
[    1.055805] usbcore: registered new interface driver plusb
[    1.055847] usbcore: registered new interface driver rndis_host
[    1.055891] usbcore: registered new interface driver cdc_subset
[    1.055938] usbcore: registered new interface driver zaurus
[    1.055978] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    1.056039] usbcore: registered new ii/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
nterface driver kalmia
[    1.056113] usbcore: registered new interface driver ipheth
[    1.056161] usbcore: registered new interface driver sierra_net
[    1.056199] usbcore: registered new interface driver cx82310_eth
[    1.056245] usbcore: registered new interface driver cdc_ncm
[    1.056282] usbcore: registered new interface driver qmi_wwan
[    1.056320] usbcore: registered new interface driver cdc_mbim
[    1.056332] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.058791] EHCI: ehci_rk_probe e2240000 e2240010
[    1.058809] rockchip_ehci_host ff500000.usb: EHCI Host Controller
[    1.058838] rockchip_ehci_host ff500000.usb: new USB bus registered, assigned bus number 1
[    1.059236] r1/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
.078652] rockchip_ehci_host ff500000.usb: USB 2.0 started, EHCI 1.00
[    1.078736] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.078754] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.078768] usb usb1: Product: EHCI Host Controller
[    1.078781] usb usb1: Manufacturer: Linux 3.10.0 ehci_hcd
[    1.078794] usb usb1: SerialNumber: ff500000.usb
[    1.079215] hub 1-0:1.0: USB hub found
[    1.079240] hub 1-0:1.0: 1 port detected
[    1.079402] EHCI: ehci_rk_probe ok
[    1.079518] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.079827] usbcore: registered new interface driver cdc_acm
[    1.079841] cdc_acm: USB Abstract Control Model driver for USB mi/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
nterface driver usblp
[    1.079938] usbcore: registered new interface driver cdc_wdm
[    1.079995] usbcore: registered new interface driver usb-storage
[    1.080032] usbcore: registered new interface driver ums-alauda
[    1.080067] usbcore: registered new interface driver ums-cypress
[    1.080104] usbcore: registered new interface driver ums-datafab
[    1.080140] usbcore: registered new interface driver ums_eneub6250
[    1.080181] usbcore: registered new interface driver ums-freecom
[    1.080219] usbcore: registered new interface driver ums-isd200
[    1.080254] usbcore: registered new interface driver ums-jumpshot
[    1.080291] usbcore: registered new interface driver ums-karma
[    1.080327] usbcore: rer/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
e: registered new interface driver ums-sddr09
[    1.080400] usbcore: registered new interface driver ums-sddr55
[    1.080438] usbcore: registered new interface driver ums-usbat
[    1.080527] usbcore: registered new interface driver usbserial
[    1.080568] usbcore: registered new interface driver usbserial_generic
[    1.080599] usbserial: USB Serial support registered for generic
[    1.080638] usbcore: registered new interface driver ch341
[    1.080668] usbserial: USB Serial support registered for ch341-uart
[    1.080706] usbcore: registered new interface driver cp210x
[    1.080735] usbserial: USB Serial support registered for cp210x
[    1.080781] usbcore: registered new intet/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
registered for GSM modem (1-port)
[    1.080877] usbcore: registered new interface driver pl2303
[    1.080912] usbserial: USB Serial support registered for pl2303
[    1.080958] usbcore: registered new interface driver trancevibrator
[    1.080970] usb20_otg: version 3.10a 21-DEC-2012
[    1.081415] e2280040
[    1.081429] Core Release: 3.10a
[    1.081441] Setting default values for core params
[    1.081582] Using Buffer DMA mode
[    1.081595] Periodic Transfer Interrupt Enhancement - disabled
[    1.081606] Multiprocessor Interrupt Enhancement - disabled
[    1.081617] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.081627] ^^^^^^^^^^^^^^^^^Device Mode
[    1.081642] Dedicated Tx FIF6/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
4] usb20_otg ff580000.usb: DWC OTG Controller
[    1.081995] usb20_otg ff580000.usb: new USB bus registered, assigned bus number 2
[    1.082032] usb20_otg ff580000.usb: irq 55, io mem 0x00000000
[    1.082093] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.082109] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.082124] usb usb2: Product: DWC OTG Controller
[    1.082137] usb usb2: Manufacturer: Linux 3.10.0 dwc_otg_hcd
[    1.082150] usb usb2: SerialNumber: ff580000.usb
[    1.082580] hub 2-0:1.0: USB hub found
[    1.082609] hub 2-0:1.0: 1 port detected
[    1.082923] usb20_host: version 3.10a 21-DEC-2012
[    1.085452] e2300040
[    l/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
ues for core params
[    1.085582] Using Buffer DMA mode
[    1.085594] Periodic Transfer Interrupt Enhancement - disabled
[    1.085605] Multiprocessor Interrupt Enhancement - disabled
[    1.085616] OTG VER PARAM: 0, OTG VER FLAG: 0
[    1.085626] ^^^^^^^^^^^^^^^^^^Host Mode
[    1.085664] usb20_host ff540000.usb: DWC OTG Controller
[    1.085691] usb20_host ff540000.usb: new USB bus registered, assigned bus number 3
[    1.085721] usb20_host ff540000.usb: irq 57, io mem 0x00000000
[    1.085813] Init: Power Port (0)
[    1.085869] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.085886] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.085900] usbu/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
facturer: Linux 3.10.0 dwc_otg_hcd
[    1.085925] usb usb3: SerialNumber: ff540000.usb
[    1.086338] hub 3-0:1.0: USB hub found
[    1.086362] hub 3-0:1.0: 1 port detected
[    1.087082] usbcore: registered new interface driver xpad
[    1.087137] usbcore: registered new interface driver usb_acecad
[    1.087188] usbcore: registered new interface driver aiptek
[    1.087233] usbcore: registered new interface driver gtco
[    1.087277] usbcore: registered new interface driver hanwang
[    1.087319] usbcore: registered new interface driver kbtab
[    1.087370] usbcore: registered new interface driver wacom
[    1.087643] sensor_register_slave:mma8452,id=17
[    1.087657] sensor_registe6/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
77] sensor_register_slave:mpu6880_acc,id=24
[    1.087688] sensor_register_slave:mpu6500_acc,id=25
[    1.087699] sensor_register_slave:cm3217,id=48
[    1.087709] sensor_register_slave:cm3218,id=49
[    1.087985] i2c /dev entries driver
[    1.088682] IR NEC protocol handler initialized
[    1.088696] IR RC5(x) protocol handler initialized
[    1.088706] IR RC6 protocol handler initialized
[    1.088715] IR JVC protocol handler initialized
[    1.088725] IR Sony protocol handler initialized
[    1.088734] IR RC5 (streamzap) protocol handler initialized
[    1.088744] IR SANYO protocol handler initialized
[    1.088754] IR MCE Keyboard/mouse protocol handler initialized
[    1.0888940/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
6] USB Video Class driver (1.1.1)
[    1.088915] gspca_main: v2.14.0 registered
[    1.089058] test power disabled
[    1.089098] i2c-core: driver [bq27320] using legacy suspend method
[    1.089110] i2c-core: driver [bq27320] using legacy resume method
[    1.089466] rockchip_temp_probe,line=364
[    1.147540] tsadc ff280000.tsadc: initialized
[    1.147949] device-mapper: uevent: version 1.0.3
[    1.148203] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    1.148486] Bluetooth: HCI UART driver ver 2.2
[    1.148502] Bluetooth: HCI H4 protocol initialized
[    1.148513] Bluetooth: HCILL protocol initialized
[    1.148524] rtk_btusb: Realtek Bluetooth USB driver module init, ven/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
terface for BT driver
[    1.148702] usbcore: registered new interface driver rtk_btusb
[    1.148810] DVFS WARNING:    clk_enable_dvfs: clk(aclk_vio1) freq table all value are smaller than default(594000), use default, just enable dvfs
[    1.169461] cpufreq version 1.0, suspend freq 1200 MHz
[    1.169644] cpuidle: using governor ladder
[    1.169657] cpuidle: using governor menu
[    1.169693] Synopsys Designware Multimedia Card Interface Driver
[    1.169705] MHSC version = Ver 2.00 2015-06-10
[    1.170010] dw cru_regsbase addr 0x1d8.
[    1.170022] dw cru_reset_offset val 3.
[    1.170037] dwmmc_rockchip ff0f0000.rksdmmc: Version ID is 270a
[    1.170093] dwmmc_rockchip ff0f0000.rksdmmc:./sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
rksdmmc: Using internal DMA controller.
[    1.170566] dw_mci_init_slot: fmin=400000, fmax=100000000 [mmc0]
[    1.170688] 1358..dw_mci_set_ios:  no card. [mmc0]
[    1.186902] 1358..dw_mci_set_ios:  no card. [mmc0]
[    1.206609] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc0]
[    1.206650] dwmmc_rockchip ff0f0000.rksdmmc: DW MMC controller at irq 67, 32 bit host data width, 256 deep fifo
[    1.206669] dwmmc_rockchip ff0f0000.rksdmmc: 1 slots initialized
[    1.206972] dw cru_regsbase addr 0x1d8.
[    1.206984] dw cru_reset_offset val 0.
[    1.206998] dwmmc_rockchip ff0c0000.rksdmmc: Version ID is 270a
[    1.207053] dwmmc_rockchip ff0c0000.rksdmmc: failedc/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
: Using internal DMA controller.
[    1.207933] dw_mci_init_slot: fmin=300000, fmax=50000000 [mmc1]
[    1.218145] dwmmc_rockchip ff0c0000.rksdmmc: mmc1: No udbg pinctrl found!
[    1.218208] 1358..dw_mci_set_ios:  no card. [mmc1]
[    1.236079] 1358..dw_mci_set_ios:  no card. [mmc1]
[    1.238692] mmc0: BKOPS_EN bit is not set
[    1.240561] rk_sdmmc: BOOT Bus speed=0Hz,Bus width=8bits.[mmc0]
[    1.242839] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[    1.242863] rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out normal clock [mmc0]
[    1.242884] [mmc0] tuning regsbase addr 0x218.
[    1.243626] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000088]
[    1.243636] [mmc0] host was already tuning, Don't need to retry tune agan/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
ing error: cmd.error:0, data.error:-84
[    1.243692] [mmc0] Data transmission error !!!!  MINTSTS: [0x00000080]
[    1.243701] [mmc0] host was already tuning, Don't need to retry tune again ignore 0.
[    1.243729] dwmmc_rockchip ff0f0000.rksdmmc: Tuning error: cmd.error:-84, data.error:-115
[    1.243773] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 0-248 (23 len)
[    1.243785] dwmmc_rockchip ff0f0000.rksdmmc: Good phase range 282-282 (1 len)
[    1.243796] dwmmc_rockchip ff0f0000.rksdmmc: Best phase range 0-248 (23 len)
[    1.243806] dwmmc_rockchip ff0f0000.rksdmmc: Successfully tuned phase to 124
[    1.243849] mmc0: new HS200 MMC card at address 0001
[    1.244118] mmcblk0: mmc0:0001 AJt/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
ition 3 4.00 MiB
[    1.244523]  parameter: 0x000000000 -- 0x000400000 (4 MB)
[    1.244534]      uboot: 0x000400000 -- 0x000800000 (4 MB)
[    1.244543]       misc: 0x000800000 -- 0x000c00000 (4 MB)
[    1.244552]   resource: 0x000c00000 -- 0x001c00000 (16 MB)
[    1.244561]     kernel: 0x001c00000 -- 0x002c00000 (16 MB)
[    1.244569]       boot: 0x002c00000 -- 0x004c00000 (32 MB)
[    1.244577]   recovery: 0x004c00000 -- 0x006c00000 (32 MB)
[    1.244586]     backup: 0x006c00000 -- 0x00a000000 (52 MB)
[    1.244594]      cache: 0x00a000000 -- 0x012000000 (128 MB)
[    1.244602]     kpanic: 0x012000000 -- 0x012400000 (4 MB)
/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control

[    1.244627] baseparamer: 0x073400000 -- 0x073800000 (4 MB)
[    1.244636]   userdata: 0x077800000 -- 0x3a3a00000 (12994 MB)
[    1.244665]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14rk_sdmmc: BOOT dw_mci_setup_bus: argue clk_mmc workaround out 800000Hz for init[mmc1]
[    1.255826] dwmmc_rockchip ff0c0000.rksdmmc: DW MMC controller at irq 64, 32 bit host data width, 256 deep fifo
[    1.255838] dwmmc_rockchip ff0c0000.rksdmmc: 1 slots initialized
[    1.256147] dw cru_regsbase addr 0x1d8.
[    1.256157] dw cru_reset_offset val 1.
[    1.256167] dwmmc_rockchip ff0d0000.rksdmmc: Version ID is 270a
[    1.256203] dwmmc_rockchip ff0d0000.rksdmmc: failed to get hpclk_mmc
[   o/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
ntroller.
[    1.256552] dw_mci_init_slot: fmin=200000, fmax=50000000 [mmc2]
[    1.256805] 1358..dw_mci_set_ios:  no card. [mmc2]
[    1.275455] 1358..dw_mci_set_ios:  no card. [mmc2]
[    1.295153] dwmmc_rockchip ff0d0000.rksdmmc: DW MMC controller at irq 65, 32 bit host data width, 256 deep fifo
[    1.295166] dwmmc_rockchip ff0d0000.rksdmmc: 1 slots initialized
[    1.295448] leds-gpio leds.29: pins are not configured from the driver
[    1.295497] leds-gpio leds.29: Skipping unavailable LED gpio -2 (firefly:blue:power)
[    1.295514] leds-gpio leds.29: Skipping unavailable LED gpio -2 (firefly:yellow:user)
[    1.295735] hidraw: raw HID events driver (C) Jiri Kosina
[    1.297112] us/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
bhid: USB HID core driver
[    1.297230] ashmem: initialized
[    1.297343] logger: created 256K log 'log_main'
[    1.297438] logger: created 256K log 'log_events'
[    1.297532] logger: created 256K log 'log_radio'
[    1.297619] logger: created 256K log 'log_system'
[    1.298669] input: rk29-keypad as /devices/ff100000.adc/key.31/input/input0
[    1.300154] rockchip-spdif ff880000.rockchip-spdif: spdif ready.
[    1.304526] rockchip-hdmi-i2s rockchip-hdmi-i2s.25:  rk-hdmi-i2s-hifi <-> ff890000.rockchip-i2s mapping ok
[    1.315446] mmc1: Skipping voltage switch
[    1.319451] wm8580 2-001a: ASoC: no source widget found for DAC1
[    1.319463] wm8580 2-001a: ASoC: Failed to add route DAC1 -> direct -> VOUT1L
A/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
C1
[    1.319486] wm8580 2-001a: ASoC: Failed to add route DAC1 -> direct -> VOUT1R
[    1.319496] wm8580 2-001a: ASoC: no source widget found for DAC2
[    1.319514] wm8580 2-001a: ASoC: Failed to add route DAC2 -> direct -> VOUT2L
[    1.319525] wm8580 2-001a: ASoC: no source widget found for DAC2
[    1.319534] wm8580 2-001a: ASoC: Failed to add route DAC2 -> direct -> VOUT2R
[    1.319544] wm8580 2-001a: ASoC: no source widget found for DAC3
[    1.319553] wm8580 2-001a: ASoC: Failed to add route DAC3 -> direct -> VOUT3L
[    1.319563] wm8580 2-001a: ASoC: no source widget found for DAC3
[    1.319571] wm8580 2-001a: ASoC: Failed to add route DAC3 -> direct -> VOUT3R
[    1.319581]0/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
] wm8580 2-001a: ASoC: Failed to add route AINL -> direct -> ADC
[    1.319599] wm8580 2-001a: ASoC: no sink widget found for ADC
[    1.319607] wm8580 2-001a: ASoC: Failed to add route AINR -> direct -> ADC
[    1.319708] Enter::rk29_wm8580_init----160
[    1.321563] rockchip-wm8580 rockchip-wm8580.27:  wm8580-hifi-playback <-> ff890000.rockchip-i2s mapping ok
[    1.321678] Enter::rk29_wm8580_init----160
[    1.323689] rockchip-wm8580 rockchip-wm8580.27:  wm8580-hifi-capture <-> ff890000.rockchip-i2s mapping ok
[    1.323733] wm8580 2-001a: ASoC: Failed to create LineIn debugfs file
[    1.323757] wm8580 2-001a: ASoC: Failed to create MicIn debugfs file
[    1.323770] wm8580 2-001a: 2/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
-001a: ASoC: Failed to create CenterSub debugfs file
[    1.323801] wm8580 2-001a: ASoC: Failed to create Front debugfs file
[    1.324208] rockchip_wm8580_audio_probe() register card
[    1.324312] u32 classifier
[    1.324320]     Actions configured
[    1.324333] Netfilter messages via NETLINK v0.30.
[    1.324393] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    1.324768] ctnetlink v0.93: registering with nfnetlink.
[    1.324839] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    1.324849] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    1.325115] xt_time: kernel timezone is -0000
[    1.325386] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.325u/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
bic registered
[    1.325635] Initializing XFRM netlink socket
[    1.325864] NET: Registered protocol family 10
[    1.326447] mip6: Mobile IPv6
[    1.326477] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.326600] sit: IPv6 over IPv4 tunneling driver
[    1.326961] NET: Registered protocol family 17
[    1.326987] NET: Registered protocol family 15
[    1.327047] Bridge firewalling registered
[    1.327059] Ebtables v2.0 registered
[    1.327241] Bluetooth: RFCOMM TTY layer initialized
[    1.327267] Bluetooth: RFCOMM socket layer initialized
[    1.327275] Bluetooth: RFCOMM ver 1.11
[    1.327284] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    1.327291] Bluetooth: BNo/sbin/sh: No controlling tty: open /dev/tty: No such device or address
/sbin/sh: warning: won't have full job control
cket layer initialized
[    1.327311] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    1.327323] Bluetooth: HIDP socket layer initialized
[    1.327353] l2tp_core: L2TP core driver, V2.0
[    1.327369] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[    1.327376] [WLAN_RFKILL]: Enter rfkill_wlan_init
[    1.327624] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[    1.327640] [WLAN_RFKILL]: can't find rockchip,grf property
[    1.327650] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = bcmwifi
[    1.327660] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[    1.327670] [WLAN_RFKILL]: wlan_platdata_parse_dt: disable wifi io reference voltage control.
[    1.327680] [WL.
回复

使用道具 举报

3750

积分

17

威望

18

贡献

官方团队

Rank: 9Rank: 9Rank: 9

积分
3750
发表于 2019-1-17 19:31:57        只看该作者  地板
JLEE 发表于 2019-1-17 13:00
Thank you for your answer.
I made a microSD for upgrade using the tool you attached.
However, wh ...

Hi, you can use the new firmware to make mircoSD,the firmware link as follow
https://drive.google.com/open?id ... rRh6qo7hnud2n-qU0_m
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

友情链接 : 爱板网 电子发烧友论坛 云汉电子社区 粤ICP备14022046号-2
快速回复 返回顶部 返回列表